summaryrefslogtreecommitdiff
path: root/drivers/tty/serial/m32r_sio.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/tty/serial/m32r_sio.c')
-rw-r--r--drivers/tty/serial/m32r_sio.c134
1 files changed, 21 insertions, 113 deletions
diff --git a/drivers/tty/serial/m32r_sio.c b/drivers/tty/serial/m32r_sio.c
index 0eeb64f24..68765f7c2 100644
--- a/drivers/tty/serial/m32r_sio.c
+++ b/drivers/tty/serial/m32r_sio.c
@@ -47,59 +47,26 @@
#define BAUD_RATE 115200
#include <linux/serial_core.h>
-#include "m32r_sio.h"
#include "m32r_sio_reg.h"
-/*
- * Debugging.
- */
-#if 0
-#define DEBUG_AUTOCONF(fmt...) printk(fmt)
-#else
-#define DEBUG_AUTOCONF(fmt...) do { } while (0)
-#endif
-
-#if 0
-#define DEBUG_INTR(fmt...) printk(fmt)
-#else
-#define DEBUG_INTR(fmt...) do { } while (0)
-#endif
-
#define PASS_LIMIT 256
-#define BASE_BAUD 115200
-
/* Standard COM flags */
#define STD_COM_FLAGS (UPF_BOOT_AUTOCONF | UPF_SKIP_TEST)
-/*
- * SERIAL_PORT_DFNS tells us about built-in ports that have no
- * standard enumeration mechanism. Platforms that can find all
- * serial ports via mechanisms like ACPI or PCI need not supply it.
- */
+static const struct {
+ unsigned int port;
+ unsigned int irq;
+} old_serial_port[] = {
#if defined(CONFIG_PLAT_USRV)
-
-#define SERIAL_PORT_DFNS \
- /* UART CLK PORT IRQ FLAGS */ \
- { 0, BASE_BAUD, 0x3F8, PLD_IRQ_UART0, STD_COM_FLAGS }, /* ttyS0 */ \
- { 0, BASE_BAUD, 0x2F8, PLD_IRQ_UART1, STD_COM_FLAGS }, /* ttyS1 */
-
-#else /* !CONFIG_PLAT_USRV */
-
-#if defined(CONFIG_SERIAL_M32R_PLDSIO)
-#define SERIAL_PORT_DFNS \
- { 0, BASE_BAUD, ((unsigned long)PLD_ESIO0CR), PLD_IRQ_SIO0_RCV, \
- STD_COM_FLAGS }, /* ttyS0 */
+ /* PORT IRQ FLAGS */
+ { 0x3F8, PLD_IRQ_UART0 }, /* ttyS0 */
+ { 0x2F8, PLD_IRQ_UART1 }, /* ttyS1 */
+#elif defined(CONFIG_SERIAL_M32R_PLDSIO)
+ { ((unsigned long)PLD_ESIO0CR), PLD_IRQ_SIO0_RCV }, /* ttyS0 */
#else
-#define SERIAL_PORT_DFNS \
- { 0, BASE_BAUD, M32R_SIO_OFFSET, M32R_IRQ_SIO0_R, \
- STD_COM_FLAGS }, /* ttyS0 */
+ { M32R_SIO_OFFSET, M32R_IRQ_SIO0_R }, /* ttyS0 */
#endif
-
-#endif /* !CONFIG_PLAT_USRV */
-
-static struct old_serial_port old_serial_port[] = {
- SERIAL_PORT_DFNS
};
#define UART_NR ARRAY_SIZE(old_serial_port)
@@ -108,19 +75,7 @@ struct uart_sio_port {
struct uart_port port;
struct timer_list timer; /* "no irq" timer */
struct list_head list; /* ports on this IRQ */
- unsigned short rev;
- unsigned char acr;
unsigned char ier;
- unsigned char lcr;
- unsigned char mcr_mask; /* mask of user bits */
- unsigned char mcr_force; /* mask of forced bits */
- unsigned char lsr_break_flag;
-
- /*
- * We provide a per-port pm hook.
- */
- void (*pm)(struct uart_port *port,
- unsigned int state, unsigned int old);
};
struct irq_info {
@@ -345,14 +300,8 @@ static void receive_chars(struct uart_sio_port *up, int *status)
*/
*status &= up->port.read_status_mask;
- if (up->port.line == up->port.cons->index) {
- /* Recover the break flag from console xmit */
- *status |= up->lsr_break_flag;
- up->lsr_break_flag = 0;
- }
-
if (*status & UART_LSR_BI) {
- DEBUG_INTR("handling break....");
+ pr_debug("handling break....\n");
flag = TTY_BREAK;
} else if (*status & UART_LSR_PE)
flag = TTY_PARITY;
@@ -413,7 +362,7 @@ static void transmit_chars(struct uart_sio_port *up)
if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
uart_write_wakeup(&up->port);
- DEBUG_INTR("THRE...");
+ pr_debug("THRE...\n");
if (uart_circ_empty(xmit))
m32r_sio_stop_tx(&up->port);
@@ -425,7 +374,7 @@ static void transmit_chars(struct uart_sio_port *up)
static inline void m32r_sio_handle_port(struct uart_sio_port *up,
unsigned int status)
{
- DEBUG_INTR("status = %x...", status);
+ pr_debug("status = %x...\n", status);
if (status & 0x04)
receive_chars(up, &status);
@@ -453,7 +402,7 @@ static irqreturn_t m32r_sio_interrupt(int irq, void *dev_id)
struct list_head *l, *end = NULL;
int pass_counter = 0;
- DEBUG_INTR("m32r_sio_interrupt(%d)...", irq);
+ pr_debug("m32r_sio_interrupt(%d)...\n", irq);
#ifdef CONFIG_SERIAL_M32R_PLDSIO
// if (irq == PLD_IRQ_SIO0_SND)
@@ -493,7 +442,7 @@ static irqreturn_t m32r_sio_interrupt(int irq, void *dev_id)
spin_unlock(&i->lock);
- DEBUG_INTR("end.\n");
+ pr_debug("end.\n");
return IRQ_HANDLED;
}
@@ -782,20 +731,9 @@ static void m32r_sio_set_termios(struct uart_port *port,
serial_out(up, UART_IER, up->ier);
- up->lcr = cval; /* Save LCR */
spin_unlock_irqrestore(&up->port.lock, flags);
}
-static void m32r_sio_pm(struct uart_port *port, unsigned int state,
- unsigned int oldstate)
-{
- struct uart_sio_port *up =
- container_of(port, struct uart_sio_port, port);
-
- if (up->pm)
- up->pm(port, state, oldstate);
-}
-
/*
* Resource handling. This is complicated by the fact that resources
* depend on the port type. Maybe we should be claiming the standard
@@ -932,7 +870,6 @@ static struct uart_ops m32r_sio_pops = {
.startup = m32r_sio_startup,
.shutdown = m32r_sio_shutdown,
.set_termios = m32r_sio_set_termios,
- .pm = m32r_sio_pm,
.release_port = m32r_sio_release_port,
.request_port = m32r_sio_request_port,
.config_port = m32r_sio_config_port,
@@ -951,15 +888,14 @@ static void __init m32r_sio_init_ports(void)
return;
first = 0;
- for (i = 0, up = m32r_sio_ports; i < ARRAY_SIZE(old_serial_port);
- i++, up++) {
+ for (i = 0, up = m32r_sio_ports; i < UART_NR; i++, up++) {
up->port.iobase = old_serial_port[i].port;
up->port.irq = irq_canonicalize(old_serial_port[i].irq);
- up->port.uartclk = old_serial_port[i].baud_base * 16;
- up->port.flags = old_serial_port[i].flags;
- up->port.membase = old_serial_port[i].iomem_base;
- up->port.iotype = old_serial_port[i].io_type;
- up->port.regshift = old_serial_port[i].iomem_reg_shift;
+ up->port.uartclk = BAUD_RATE * 16;
+ up->port.flags = STD_COM_FLAGS;
+ up->port.membase = 0;
+ up->port.iotype = 0;
+ up->port.regshift = 0;
up->port.ops = &m32r_sio_pops;
}
}
@@ -978,9 +914,6 @@ static void __init m32r_sio_register_ports(struct uart_driver *drv)
init_timer(&up->timer);
up->timer.function = m32r_sio_timeout;
- up->mcr_mask = ~0;
- up->mcr_force = 0;
-
uart_add_one_port(drv, &up->port);
}
}
@@ -1112,28 +1045,6 @@ static struct uart_driver m32r_sio_reg = {
.cons = M32R_SIO_CONSOLE,
};
-/**
- * m32r_sio_suspend_port - suspend one serial port
- * @line: serial line number
- *
- * Suspend one serial port.
- */
-void m32r_sio_suspend_port(int line)
-{
- uart_suspend_port(&m32r_sio_reg, &m32r_sio_ports[line].port);
-}
-
-/**
- * m32r_sio_resume_port - resume one serial port
- * @line: serial line number
- *
- * Resume one serial port.
- */
-void m32r_sio_resume_port(int line)
-{
- uart_resume_port(&m32r_sio_reg, &m32r_sio_ports[line].port);
-}
-
static int __init m32r_sio_init(void)
{
int ret, i;
@@ -1163,8 +1074,5 @@ static void __exit m32r_sio_exit(void)
module_init(m32r_sio_init);
module_exit(m32r_sio_exit);
-EXPORT_SYMBOL(m32r_sio_suspend_port);
-EXPORT_SYMBOL(m32r_sio_resume_port);
-
MODULE_LICENSE("GPL");
MODULE_DESCRIPTION("Generic M32R SIO serial driver");