diff options
Diffstat (limited to 'drivers/tty/serial/mpc52xx_uart.c')
| -rw-r--r-- | drivers/tty/serial/mpc52xx_uart.c | 1958 |
1 files changed, 1958 insertions, 0 deletions
diff --git a/drivers/tty/serial/mpc52xx_uart.c b/drivers/tty/serial/mpc52xx_uart.c new file mode 100644 index 000000000..1589f17c1 --- /dev/null +++ b/drivers/tty/serial/mpc52xx_uart.c @@ -0,0 +1,1958 @@ +/* + * Driver for the PSC of the Freescale MPC52xx PSCs configured as UARTs. + * + * FIXME According to the usermanual the status bits in the status register + * are only updated when the peripherals access the FIFO and not when the + * CPU access them. So since we use this bits to know when we stop writing + * and reading, they may not be updated in-time and a race condition may + * exists. But I haven't be able to prove this and I don't care. But if + * any problem arises, it might worth checking. The TX/RX FIFO Stats + * registers should be used in addition. + * Update: Actually, they seem updated ... At least the bits we use. + * + * + * Maintainer : Sylvain Munaut <tnt@246tNt.com> + * + * Some of the code has been inspired/copied from the 2.4 code written + * by Dale Farnsworth <dfarnsworth@mvista.com>. + * + * Copyright (C) 2008 Freescale Semiconductor Inc. + * John Rigby <jrigby@gmail.com> + * Added support for MPC5121 + * Copyright (C) 2006 Secret Lab Technologies Ltd. + * Grant Likely <grant.likely@secretlab.ca> + * Copyright (C) 2004-2006 Sylvain Munaut <tnt@246tNt.com> + * Copyright (C) 2003 MontaVista, Software, Inc. + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +#undef DEBUG + +#include <linux/device.h> +#include <linux/module.h> +#include <linux/tty.h> +#include <linux/tty_flip.h> +#include <linux/serial.h> +#include <linux/sysrq.h> +#include <linux/console.h> +#include <linux/delay.h> +#include <linux/io.h> +#include <linux/of.h> +#include <linux/of_platform.h> +#include <linux/clk.h> + +#include <asm/mpc52xx.h> +#include <asm/mpc52xx_psc.h> + +#if defined(CONFIG_SERIAL_MPC52xx_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) +#define SUPPORT_SYSRQ +#endif + +#include <linux/serial_core.h> + + +/* We've been assigned a range on the "Low-density serial ports" major */ +#define SERIAL_PSC_MAJOR 204 +#define SERIAL_PSC_MINOR 148 + + +#define ISR_PASS_LIMIT 256 /* Max number of iteration in the interrupt */ + + +static struct uart_port mpc52xx_uart_ports[MPC52xx_PSC_MAXNUM]; + /* Rem: - We use the read_status_mask as a shadow of + * psc->mpc52xx_psc_imr + * - It's important that is array is all zero on start as we + * use it to know if it's initialized or not ! If it's not sure + * it's cleared, then a memset(...,0,...) should be added to + * the console_init + */ + +/* lookup table for matching device nodes to index numbers */ +static struct device_node *mpc52xx_uart_nodes[MPC52xx_PSC_MAXNUM]; + +static void mpc52xx_uart_of_enumerate(void); + + +#define PSC(port) ((struct mpc52xx_psc __iomem *)((port)->membase)) + + +/* Forward declaration of the interruption handling routine */ +static irqreturn_t mpc52xx_uart_int(int irq, void *dev_id); +static irqreturn_t mpc5xxx_uart_process_int(struct uart_port *port); + +/* ======================================================================== */ +/* PSC fifo operations for isolating differences between 52xx and 512x */ +/* ======================================================================== */ + +struct psc_ops { + void (*fifo_init)(struct uart_port *port); + int (*raw_rx_rdy)(struct uart_port *port); + int (*raw_tx_rdy)(struct uart_port *port); + int (*rx_rdy)(struct uart_port *port); + int (*tx_rdy)(struct uart_port *port); + int (*tx_empty)(struct uart_port *port); + void (*stop_rx)(struct uart_port *port); + void (*start_tx)(struct uart_port *port); + void (*stop_tx)(struct uart_port *port); + void (*rx_clr_irq)(struct uart_port *port); + void (*tx_clr_irq)(struct uart_port *port); + void (*write_char)(struct uart_port *port, unsigned char c); + unsigned char (*read_char)(struct uart_port *port); + void (*cw_disable_ints)(struct uart_port *port); + void (*cw_restore_ints)(struct uart_port *port); + unsigned int (*set_baudrate)(struct uart_port *port, + struct ktermios *new, + struct ktermios *old); + int (*clock_alloc)(struct uart_port *port); + void (*clock_relse)(struct uart_port *port); + int (*clock)(struct uart_port *port, int enable); + int (*fifoc_init)(void); + void (*fifoc_uninit)(void); + void (*get_irq)(struct uart_port *, struct device_node *); + irqreturn_t (*handle_irq)(struct uart_port *port); + u16 (*get_status)(struct uart_port *port); + u8 (*get_ipcr)(struct uart_port *port); + void (*command)(struct uart_port *port, u8 cmd); + void (*set_mode)(struct uart_port *port, u8 mr1, u8 mr2); + void (*set_rts)(struct uart_port *port, int state); + void (*enable_ms)(struct uart_port *port); + void (*set_sicr)(struct uart_port *port, u32 val); + void (*set_imr)(struct uart_port *port, u16 val); + u8 (*get_mr1)(struct uart_port *port); +}; + +/* setting the prescaler and divisor reg is common for all chips */ +static inline void mpc52xx_set_divisor(struct mpc52xx_psc __iomem *psc, + u16 prescaler, unsigned int divisor) +{ + /* select prescaler */ + out_be16(&psc->mpc52xx_psc_clock_select, prescaler); + out_8(&psc->ctur, divisor >> 8); + out_8(&psc->ctlr, divisor & 0xff); +} + +static u16 mpc52xx_psc_get_status(struct uart_port *port) +{ + return in_be16(&PSC(port)->mpc52xx_psc_status); +} + +static u8 mpc52xx_psc_get_ipcr(struct uart_port *port) +{ + return in_8(&PSC(port)->mpc52xx_psc_ipcr); +} + +static void mpc52xx_psc_command(struct uart_port *port, u8 cmd) +{ + out_8(&PSC(port)->command, cmd); +} + +static void mpc52xx_psc_set_mode(struct uart_port *port, u8 mr1, u8 mr2) +{ + out_8(&PSC(port)->command, MPC52xx_PSC_SEL_MODE_REG_1); + out_8(&PSC(port)->mode, mr1); + out_8(&PSC(port)->mode, mr2); +} + +static void mpc52xx_psc_set_rts(struct uart_port *port, int state) +{ + if (state) + out_8(&PSC(port)->op1, MPC52xx_PSC_OP_RTS); + else + out_8(&PSC(port)->op0, MPC52xx_PSC_OP_RTS); +} + +static void mpc52xx_psc_enable_ms(struct uart_port *port) +{ + struct mpc52xx_psc __iomem *psc = PSC(port); + + /* clear D_*-bits by reading them */ + in_8(&psc->mpc52xx_psc_ipcr); + /* enable CTS and DCD as IPC interrupts */ + out_8(&psc->mpc52xx_psc_acr, MPC52xx_PSC_IEC_CTS | MPC52xx_PSC_IEC_DCD); + + port->read_status_mask |= MPC52xx_PSC_IMR_IPC; + out_be16(&psc->mpc52xx_psc_imr, port->read_status_mask); +} + +static void mpc52xx_psc_set_sicr(struct uart_port *port, u32 val) +{ + out_be32(&PSC(port)->sicr, val); +} + +static void mpc52xx_psc_set_imr(struct uart_port *port, u16 val) +{ + out_be16(&PSC(port)->mpc52xx_psc_imr, val); +} + +static u8 mpc52xx_psc_get_mr1(struct uart_port *port) +{ + out_8(&PSC(port)->command, MPC52xx_PSC_SEL_MODE_REG_1); + return in_8(&PSC(port)->mode); +} + +#ifdef CONFIG_PPC_MPC52xx +#define FIFO_52xx(port) ((struct mpc52xx_psc_fifo __iomem *)(PSC(port)+1)) +static void mpc52xx_psc_fifo_init(struct uart_port *port) +{ + struct mpc52xx_psc __iomem *psc = PSC(port); + struct mpc52xx_psc_fifo __iomem *fifo = FIFO_52xx(port); + + out_8(&fifo->rfcntl, 0x00); + out_be16(&fifo->rfalarm, 0x1ff); + out_8(&fifo->tfcntl, 0x07); + out_be16(&fifo->tfalarm, 0x80); + + port->read_status_mask |= MPC52xx_PSC_IMR_RXRDY | MPC52xx_PSC_IMR_TXRDY; + out_be16(&psc->mpc52xx_psc_imr, port->read_status_mask); +} + +static int mpc52xx_psc_raw_rx_rdy(struct uart_port *port) +{ + return in_be16(&PSC(port)->mpc52xx_psc_status) + & MPC52xx_PSC_SR_RXRDY; +} + +static int mpc52xx_psc_raw_tx_rdy(struct uart_port *port) +{ + return in_be16(&PSC(port)->mpc52xx_psc_status) + & MPC52xx_PSC_SR_TXRDY; +} + + +static int mpc52xx_psc_rx_rdy(struct uart_port *port) +{ + return in_be16(&PSC(port)->mpc52xx_psc_isr) + & port->read_status_mask + & MPC52xx_PSC_IMR_RXRDY; +} + +static int mpc52xx_psc_tx_rdy(struct uart_port *port) +{ + return in_be16(&PSC(port)->mpc52xx_psc_isr) + & port->read_status_mask + & MPC52xx_PSC_IMR_TXRDY; +} + +static int mpc52xx_psc_tx_empty(struct uart_port *port) +{ + return in_be16(&PSC(port)->mpc52xx_psc_status) + & MPC52xx_PSC_SR_TXEMP; +} + +static void mpc52xx_psc_start_tx(struct uart_port *port) +{ + port->read_status_mask |= MPC52xx_PSC_IMR_TXRDY; + out_be16(&PSC(port)->mpc52xx_psc_imr, port->read_status_mask); +} + +static void mpc52xx_psc_stop_tx(struct uart_port *port) +{ + port->read_status_mask &= ~MPC52xx_PSC_IMR_TXRDY; + out_be16(&PSC(port)->mpc52xx_psc_imr, port->read_status_mask); +} + +static void mpc52xx_psc_stop_rx(struct uart_port *port) +{ + port->read_status_mask &= ~MPC52xx_PSC_IMR_RXRDY; + out_be16(&PSC(port)->mpc52xx_psc_imr, port->read_status_mask); +} + +static void mpc52xx_psc_rx_clr_irq(struct uart_port *port) +{ +} + +static void mpc52xx_psc_tx_clr_irq(struct uart_port *port) +{ +} + +static void mpc52xx_psc_write_char(struct uart_port *port, unsigned char c) +{ + out_8(&PSC(port)->mpc52xx_psc_buffer_8, c); +} + +static unsigned char mpc52xx_psc_read_char(struct uart_port *port) +{ + return in_8(&PSC(port)->mpc52xx_psc_buffer_8); +} + +static void mpc52xx_psc_cw_disable_ints(struct uart_port *port) +{ + out_be16(&PSC(port)->mpc52xx_psc_imr, 0); +} + +static void mpc52xx_psc_cw_restore_ints(struct uart_port *port) +{ + out_be16(&PSC(port)->mpc52xx_psc_imr, port->read_status_mask); +} + +static unsigned int mpc5200_psc_set_baudrate(struct uart_port *port, + struct ktermios *new, + struct ktermios *old) +{ + unsigned int baud; + unsigned int divisor; + + /* The 5200 has a fixed /32 prescaler, uartclk contains the ipb freq */ + baud = uart_get_baud_rate(port, new, old, + port->uartclk / (32 * 0xffff) + 1, + port->uartclk / 32); + divisor = (port->uartclk + 16 * baud) / (32 * baud); + + /* enable the /32 prescaler and set the divisor */ + mpc52xx_set_divisor(PSC(port), 0xdd00, divisor); + return baud; +} + +static unsigned int mpc5200b_psc_set_baudrate(struct uart_port *port, + struct ktermios *new, + struct ktermios *old) +{ + unsigned int baud; + unsigned int divisor; + u16 prescaler; + + /* The 5200B has a selectable /4 or /32 prescaler, uartclk contains the + * ipb freq */ + baud = uart_get_baud_rate(port, new, old, + port->uartclk / (32 * 0xffff) + 1, + port->uartclk / 4); + divisor = (port->uartclk + 2 * baud) / (4 * baud); + + /* select the proper prescaler and set the divisor + * prefer high prescaler for more tolerance on low baudrates */ + if (divisor > 0xffff || baud <= 115200) { + divisor = (divisor + 4) / 8; + prescaler = 0xdd00; /* /32 */ + } else + prescaler = 0xff00; /* /4 */ + mpc52xx_set_divisor(PSC(port), prescaler, divisor); + return baud; +} + +static void mpc52xx_psc_get_irq(struct uart_port *port, struct device_node *np) +{ + port->irqflags = 0; + port->irq = irq_of_parse_and_map(np, 0); +} + +/* 52xx specific interrupt handler. The caller holds the port lock */ +static irqreturn_t mpc52xx_psc_handle_irq(struct uart_port *port) +{ + return mpc5xxx_uart_process_int(port); +} + +static struct psc_ops mpc52xx_psc_ops = { + .fifo_init = mpc52xx_psc_fifo_init, + .raw_rx_rdy = mpc52xx_psc_raw_rx_rdy, + .raw_tx_rdy = mpc52xx_psc_raw_tx_rdy, + .rx_rdy = mpc52xx_psc_rx_rdy, + .tx_rdy = mpc52xx_psc_tx_rdy, + .tx_empty = mpc52xx_psc_tx_empty, + .stop_rx = mpc52xx_psc_stop_rx, + .start_tx = mpc52xx_psc_start_tx, + .stop_tx = mpc52xx_psc_stop_tx, + .rx_clr_irq = mpc52xx_psc_rx_clr_irq, + .tx_clr_irq = mpc52xx_psc_tx_clr_irq, + .write_char = mpc52xx_psc_write_char, + .read_char = mpc52xx_psc_read_char, + .cw_disable_ints = mpc52xx_psc_cw_disable_ints, + .cw_restore_ints = mpc52xx_psc_cw_restore_ints, + .set_baudrate = mpc5200_psc_set_baudrate, + .get_irq = mpc52xx_psc_get_irq, + .handle_irq = mpc52xx_psc_handle_irq, + .get_status = mpc52xx_psc_get_status, + .get_ipcr = mpc52xx_psc_get_ipcr, + .command = mpc52xx_psc_command, + .set_mode = mpc52xx_psc_set_mode, + .set_rts = mpc52xx_psc_set_rts, + .enable_ms = mpc52xx_psc_enable_ms, + .set_sicr = mpc52xx_psc_set_sicr, + .set_imr = mpc52xx_psc_set_imr, + .get_mr1 = mpc52xx_psc_get_mr1, +}; + +static struct psc_ops mpc5200b_psc_ops = { + .fifo_init = mpc52xx_psc_fifo_init, + .raw_rx_rdy = mpc52xx_psc_raw_rx_rdy, + .raw_tx_rdy = mpc52xx_psc_raw_tx_rdy, + .rx_rdy = mpc52xx_psc_rx_rdy, + .tx_rdy = mpc52xx_psc_tx_rdy, + .tx_empty = mpc52xx_psc_tx_empty, + .stop_rx = mpc52xx_psc_stop_rx, + .start_tx = mpc52xx_psc_start_tx, + .stop_tx = mpc52xx_psc_stop_tx, + .rx_clr_irq = mpc52xx_psc_rx_clr_irq, + .tx_clr_irq = mpc52xx_psc_tx_clr_irq, + .write_char = mpc52xx_psc_write_char, + .read_char = mpc52xx_psc_read_char, + .cw_disable_ints = mpc52xx_psc_cw_disable_ints, + .cw_restore_ints = mpc52xx_psc_cw_restore_ints, + .set_baudrate = mpc5200b_psc_set_baudrate, + .get_irq = mpc52xx_psc_get_irq, + .handle_irq = mpc52xx_psc_handle_irq, + .get_status = mpc52xx_psc_get_status, + .get_ipcr = mpc52xx_psc_get_ipcr, + .command = mpc52xx_psc_command, + .set_mode = mpc52xx_psc_set_mode, + .set_rts = mpc52xx_psc_set_rts, + .enable_ms = mpc52xx_psc_enable_ms, + .set_sicr = mpc52xx_psc_set_sicr, + .set_imr = mpc52xx_psc_set_imr, + .get_mr1 = mpc52xx_psc_get_mr1, +}; + +#endif /* CONFIG_MPC52xx */ + +#ifdef CONFIG_PPC_MPC512x +#define FIFO_512x(port) ((struct mpc512x_psc_fifo __iomem *)(PSC(port)+1)) + +/* PSC FIFO Controller for mpc512x */ +struct psc_fifoc { + u32 fifoc_cmd; + u32 fifoc_int; + u32 fifoc_dma; + u32 fifoc_axe; + u32 fifoc_debug; +}; + +static struct psc_fifoc __iomem *psc_fifoc; +static unsigned int psc_fifoc_irq; +static struct clk *psc_fifoc_clk; + +static void mpc512x_psc_fifo_init(struct uart_port *port) +{ + /* /32 prescaler */ + out_be16(&PSC(port)->mpc52xx_psc_clock_select, 0xdd00); + + out_be32(&FIFO_512x(port)->txcmd, MPC512x_PSC_FIFO_RESET_SLICE); + out_be32(&FIFO_512x(port)->txcmd, MPC512x_PSC_FIFO_ENABLE_SLICE); + out_be32(&FIFO_512x(port)->txalarm, 1); + out_be32(&FIFO_512x(port)->tximr, 0); + + out_be32(&FIFO_512x(port)->rxcmd, MPC512x_PSC_FIFO_RESET_SLICE); + out_be32(&FIFO_512x(port)->rxcmd, MPC512x_PSC_FIFO_ENABLE_SLICE); + out_be32(&FIFO_512x(port)->rxalarm, 1); + out_be32(&FIFO_512x(port)->rximr, 0); + + out_be32(&FIFO_512x(port)->tximr, MPC512x_PSC_FIFO_ALARM); + out_be32(&FIFO_512x(port)->rximr, MPC512x_PSC_FIFO_ALARM); +} + +static int mpc512x_psc_raw_rx_rdy(struct uart_port *port) +{ + return !(in_be32(&FIFO_512x(port)->rxsr) & MPC512x_PSC_FIFO_EMPTY); +} + +static int mpc512x_psc_raw_tx_rdy(struct uart_port *port) +{ + return !(in_be32(&FIFO_512x(port)->txsr) & MPC512x_PSC_FIFO_FULL); +} + +static int mpc512x_psc_rx_rdy(struct uart_port *port) +{ + return in_be32(&FIFO_512x(port)->rxsr) + & in_be32(&FIFO_512x(port)->rximr) + & MPC512x_PSC_FIFO_ALARM; +} + +static int mpc512x_psc_tx_rdy(struct uart_port *port) +{ + return in_be32(&FIFO_512x(port)->txsr) + & in_be32(&FIFO_512x(port)->tximr) + & MPC512x_PSC_FIFO_ALARM; +} + +static int mpc512x_psc_tx_empty(struct uart_port *port) +{ + return in_be32(&FIFO_512x(port)->txsr) + & MPC512x_PSC_FIFO_EMPTY; +} + +static void mpc512x_psc_stop_rx(struct uart_port *port) +{ + unsigned long rx_fifo_imr; + + rx_fifo_imr = in_be32(&FIFO_512x(port)->rximr); + rx_fifo_imr &= ~MPC512x_PSC_FIFO_ALARM; + out_be32(&FIFO_512x(port)->rximr, rx_fifo_imr); +} + +static void mpc512x_psc_start_tx(struct uart_port *port) +{ + unsigned long tx_fifo_imr; + + tx_fifo_imr = in_be32(&FIFO_512x(port)->tximr); + tx_fifo_imr |= MPC512x_PSC_FIFO_ALARM; + out_be32(&FIFO_512x(port)->tximr, tx_fifo_imr); +} + +static void mpc512x_psc_stop_tx(struct uart_port *port) +{ + unsigned long tx_fifo_imr; + + tx_fifo_imr = in_be32(&FIFO_512x(port)->tximr); + tx_fifo_imr &= ~MPC512x_PSC_FIFO_ALARM; + out_be32(&FIFO_512x(port)->tximr, tx_fifo_imr); +} + +static void mpc512x_psc_rx_clr_irq(struct uart_port *port) +{ + out_be32(&FIFO_512x(port)->rxisr, in_be32(&FIFO_512x(port)->rxisr)); +} + +static void mpc512x_psc_tx_clr_irq(struct uart_port *port) +{ + out_be32(&FIFO_512x(port)->txisr, in_be32(&FIFO_512x(port)->txisr)); +} + +static void mpc512x_psc_write_char(struct uart_port *port, unsigned char c) +{ + out_8(&FIFO_512x(port)->txdata_8, c); +} + +static unsigned char mpc512x_psc_read_char(struct uart_port *port) +{ + return in_8(&FIFO_512x(port)->rxdata_8); +} + +static void mpc512x_psc_cw_disable_ints(struct uart_port *port) +{ + port->read_status_mask = + in_be32(&FIFO_512x(port)->tximr) << 16 | + in_be32(&FIFO_512x(port)->rximr); + out_be32(&FIFO_512x(port)->tximr, 0); + out_be32(&FIFO_512x(port)->rximr, 0); +} + +static void mpc512x_psc_cw_restore_ints(struct uart_port *port) +{ + out_be32(&FIFO_512x(port)->tximr, + (port->read_status_mask >> 16) & 0x7f); + out_be32(&FIFO_512x(port)->rximr, port->read_status_mask & 0x7f); +} + +static unsigned int mpc512x_psc_set_baudrate(struct uart_port *port, + struct ktermios *new, + struct ktermios *old) +{ + unsigned int baud; + unsigned int divisor; + + /* + * The "MPC5121e Microcontroller Reference Manual, Rev. 3" says on + * pg. 30-10 that the chip supports a /32 and a /10 prescaler. + * Furthermore, it states that "After reset, the prescaler by 10 + * for the UART mode is selected", but the reset register value is + * 0x0000 which means a /32 prescaler. This is wrong. + * + * In reality using /32 prescaler doesn't work, as it is not supported! + * Use /16 or /10 prescaler, see "MPC5121e Hardware Design Guide", + * Chapter 4.1 PSC in UART Mode. + * Calculate with a /16 prescaler here. + */ + + /* uartclk contains the ips freq */ + baud = uart_get_baud_rate(port, new, old, + port->uartclk / (16 * 0xffff) + 1, + port->uartclk / 16); + divisor = (port->uartclk + 8 * baud) / (16 * baud); + + /* enable the /16 prescaler and set the divisor */ + mpc52xx_set_divisor(PSC(port), 0xdd00, divisor); + return baud; +} + +/* Init PSC FIFO Controller */ +static int __init mpc512x_psc_fifoc_init(void) +{ + int err; + struct device_node *np; + struct clk *clk; + + /* default error code, potentially overwritten by clock calls */ + err = -ENODEV; + + np = of_find_compatible_node(NULL, NULL, + "fsl,mpc5121-psc-fifo"); + if (!np) { + pr_err("%s: Can't find FIFOC node\n", __func__); + goto out_err; + } + + clk = of_clk_get(np, 0); + if (IS_ERR(clk)) { + /* backwards compat with device trees that lack clock specs */ + clk = clk_get_sys(np->name, "ipg"); + } + if (IS_ERR(clk)) { + pr_err("%s: Can't lookup FIFO clock\n", __func__); + err = PTR_ERR(clk); + goto out_ofnode_put; + } + if (clk_prepare_enable(clk)) { + pr_err("%s: Can't enable FIFO clock\n", __func__); + clk_put(clk); + goto out_ofnode_put; + } + psc_fifoc_clk = clk; + + psc_fifoc = of_iomap(np, 0); + if (!psc_fifoc) { + pr_err("%s: Can't map FIFOC\n", __func__); + goto out_clk_disable; + } + + psc_fifoc_irq = irq_of_parse_and_map(np, 0); + if (psc_fifoc_irq == 0) { + pr_err("%s: Can't get FIFOC irq\n", __func__); + goto out_unmap; + } + + of_node_put(np); + return 0; + +out_unmap: + iounmap(psc_fifoc); +out_clk_disable: + clk_disable_unprepare(psc_fifoc_clk); + clk_put(psc_fifoc_clk); +out_ofnode_put: + of_node_put(np); +out_err: + return err; +} + +static void __exit mpc512x_psc_fifoc_uninit(void) +{ + iounmap(psc_fifoc); + + /* disable the clock, errors are not fatal */ + if (psc_fifoc_clk) { + clk_disable_unprepare(psc_fifoc_clk); + clk_put(psc_fifoc_clk); + psc_fifoc_clk = NULL; + } +} + +/* 512x specific interrupt handler. The caller holds the port lock */ +static irqreturn_t mpc512x_psc_handle_irq(struct uart_port *port) +{ + unsigned long fifoc_int; + int psc_num; + + /* Read pending PSC FIFOC interrupts */ + fifoc_int = in_be32(&psc_fifoc->fifoc_int); + + /* Check if it is an interrupt for this port */ + psc_num = (port->mapbase & 0xf00) >> 8; + if (test_bit(psc_num, &fifoc_int) || + test_bit(psc_num + 16, &fifoc_int)) + return mpc5xxx_uart_process_int(port); + + return IRQ_NONE; +} + +static struct clk *psc_mclk_clk[MPC52xx_PSC_MAXNUM]; +static struct clk *psc_ipg_clk[MPC52xx_PSC_MAXNUM]; + +/* called from within the .request_port() callback (allocation) */ +static int mpc512x_psc_alloc_clock(struct uart_port *port) +{ + int psc_num; + struct clk *clk; + int err; + + psc_num = (port->mapbase & 0xf00) >> 8; + + clk = devm_clk_get(port->dev, "mclk"); + if (IS_ERR(clk)) { + dev_err(port->dev, "Failed to get MCLK!\n"); + err = PTR_ERR(clk); + goto out_err; + } + err = clk_prepare_enable(clk); + if (err) { + dev_err(port->dev, "Failed to enable MCLK!\n"); + goto out_err; + } + psc_mclk_clk[psc_num] = clk; + + clk = devm_clk_get(port->dev, "ipg"); + if (IS_ERR(clk)) { + dev_err(port->dev, "Failed to get IPG clock!\n"); + err = PTR_ERR(clk); + goto out_err; + } + err = clk_prepare_enable(clk); + if (err) { + dev_err(port->dev, "Failed to enable IPG clock!\n"); + goto out_err; + } + psc_ipg_clk[psc_num] = clk; + + return 0; + +out_err: + if (psc_mclk_clk[psc_num]) { + clk_disable_unprepare(psc_mclk_clk[psc_num]); + psc_mclk_clk[psc_num] = NULL; + } + if (psc_ipg_clk[psc_num]) { + clk_disable_unprepare(psc_ipg_clk[psc_num]); + psc_ipg_clk[psc_num] = NULL; + } + return err; +} + +/* called from within the .release_port() callback (release) */ +static void mpc512x_psc_relse_clock(struct uart_port *port) +{ + int psc_num; + struct clk *clk; + + psc_num = (port->mapbase & 0xf00) >> 8; + clk = psc_mclk_clk[psc_num]; + if (clk) { + clk_disable_unprepare(clk); + psc_mclk_clk[psc_num] = NULL; + } + if (psc_ipg_clk[psc_num]) { + clk_disable_unprepare(psc_ipg_clk[psc_num]); + psc_ipg_clk[psc_num] = NULL; + } +} + +/* implementation of the .clock() callback (enable/disable) */ +static int mpc512x_psc_endis_clock(struct uart_port *port, int enable) +{ + int psc_num; + struct clk *psc_clk; + int ret; + + if (uart_console(port)) + return 0; + + psc_num = (port->mapbase & 0xf00) >> 8; + psc_clk = psc_mclk_clk[psc_num]; + if (!psc_clk) { + dev_err(port->dev, "Failed to get PSC clock entry!\n"); + return -ENODEV; + } + + dev_dbg(port->dev, "mclk %sable\n", enable ? "en" : "dis"); + if (enable) { + ret = clk_enable(psc_clk); + if (ret) + dev_err(port->dev, "Failed to enable MCLK!\n"); + return ret; + } else { + clk_disable(psc_clk); + return 0; + } +} + +static void mpc512x_psc_get_irq(struct uart_port *port, struct device_node *np) +{ + port->irqflags = IRQF_SHARED; + port->irq = psc_fifoc_irq; +} +#endif + +#ifdef CONFIG_PPC_MPC512x + +#define PSC_5125(port) ((struct mpc5125_psc __iomem *)((port)->membase)) +#define FIFO_5125(port) ((struct mpc512x_psc_fifo __iomem *)(PSC_5125(port)+1)) + +static void mpc5125_psc_fifo_init(struct uart_port *port) +{ + /* /32 prescaler */ + out_8(&PSC_5125(port)->mpc52xx_psc_clock_select, 0xdd); + + out_be32(&FIFO_5125(port)->txcmd, MPC512x_PSC_FIFO_RESET_SLICE); + out_be32(&FIFO_5125(port)->txcmd, MPC512x_PSC_FIFO_ENABLE_SLICE); + out_be32(&FIFO_5125(port)->txalarm, 1); + out_be32(&FIFO_5125(port)->tximr, 0); + + out_be32(&FIFO_5125(port)->rxcmd, MPC512x_PSC_FIFO_RESET_SLICE); + out_be32(&FIFO_5125(port)->rxcmd, MPC512x_PSC_FIFO_ENABLE_SLICE); + out_be32(&FIFO_5125(port)->rxalarm, 1); + out_be32(&FIFO_5125(port)->rximr, 0); + + out_be32(&FIFO_5125(port)->tximr, MPC512x_PSC_FIFO_ALARM); + out_be32(&FIFO_5125(port)->rximr, MPC512x_PSC_FIFO_ALARM); +} + +static int mpc5125_psc_raw_rx_rdy(struct uart_port *port) +{ + return !(in_be32(&FIFO_5125(port)->rxsr) & MPC512x_PSC_FIFO_EMPTY); +} + +static int mpc5125_psc_raw_tx_rdy(struct uart_port *port) +{ + return !(in_be32(&FIFO_5125(port)->txsr) & MPC512x_PSC_FIFO_FULL); +} + +static int mpc5125_psc_rx_rdy(struct uart_port *port) +{ + return in_be32(&FIFO_5125(port)->rxsr) & + in_be32(&FIFO_5125(port)->rximr) & MPC512x_PSC_FIFO_ALARM; +} + +static int mpc5125_psc_tx_rdy(struct uart_port *port) +{ + return in_be32(&FIFO_5125(port)->txsr) & + in_be32(&FIFO_5125(port)->tximr) & MPC512x_PSC_FIFO_ALARM; +} + +static int mpc5125_psc_tx_empty(struct uart_port *port) +{ + return in_be32(&FIFO_5125(port)->txsr) & MPC512x_PSC_FIFO_EMPTY; +} + +static void mpc5125_psc_stop_rx(struct uart_port *port) +{ + unsigned long rx_fifo_imr; + + rx_fifo_imr = in_be32(&FIFO_5125(port)->rximr); + rx_fifo_imr &= ~MPC512x_PSC_FIFO_ALARM; + out_be32(&FIFO_5125(port)->rximr, rx_fifo_imr); +} + +static void mpc5125_psc_start_tx(struct uart_port *port) +{ + unsigned long tx_fifo_imr; + + tx_fifo_imr = in_be32(&FIFO_5125(port)->tximr); + tx_fifo_imr |= MPC512x_PSC_FIFO_ALARM; + out_be32(&FIFO_5125(port)->tximr, tx_fifo_imr); +} + +static void mpc5125_psc_stop_tx(struct uart_port *port) +{ + unsigned long tx_fifo_imr; + + tx_fifo_imr = in_be32(&FIFO_5125(port)->tximr); + tx_fifo_imr &= ~MPC512x_PSC_FIFO_ALARM; + out_be32(&FIFO_5125(port)->tximr, tx_fifo_imr); +} + +static void mpc5125_psc_rx_clr_irq(struct uart_port *port) +{ + out_be32(&FIFO_5125(port)->rxisr, in_be32(&FIFO_5125(port)->rxisr)); +} + +static void mpc5125_psc_tx_clr_irq(struct uart_port *port) +{ + out_be32(&FIFO_5125(port)->txisr, in_be32(&FIFO_5125(port)->txisr)); +} + +static void mpc5125_psc_write_char(struct uart_port *port, unsigned char c) +{ + out_8(&FIFO_5125(port)->txdata_8, c); +} + +static unsigned char mpc5125_psc_read_char(struct uart_port *port) +{ + return in_8(&FIFO_5125(port)->rxdata_8); +} + +static void mpc5125_psc_cw_disable_ints(struct uart_port *port) +{ + port->read_status_mask = + in_be32(&FIFO_5125(port)->tximr) << 16 | + in_be32(&FIFO_5125(port)->rximr); + out_be32(&FIFO_5125(port)->tximr, 0); + out_be32(&FIFO_5125(port)->rximr, 0); +} + +static void mpc5125_psc_cw_restore_ints(struct uart_port *port) +{ + out_be32(&FIFO_5125(port)->tximr, + (port->read_status_mask >> 16) & 0x7f); + out_be32(&FIFO_5125(port)->rximr, port->read_status_mask & 0x7f); +} + +static inline void mpc5125_set_divisor(struct mpc5125_psc __iomem *psc, + u8 prescaler, unsigned int divisor) +{ + /* select prescaler */ + out_8(&psc->mpc52xx_psc_clock_select, prescaler); + out_8(&psc->ctur, divisor >> 8); + out_8(&psc->ctlr, divisor & 0xff); +} + +static unsigned int mpc5125_psc_set_baudrate(struct uart_port *port, + struct ktermios *new, + struct ktermios *old) +{ + unsigned int baud; + unsigned int divisor; + + /* + * Calculate with a /16 prescaler here. + */ + + /* uartclk contains the ips freq */ + baud = uart_get_baud_rate(port, new, old, + port->uartclk / (16 * 0xffff) + 1, + port->uartclk / 16); + divisor = (port->uartclk + 8 * baud) / (16 * baud); + + /* enable the /16 prescaler and set the divisor */ + mpc5125_set_divisor(PSC_5125(port), 0xdd, divisor); + return baud; +} + +/* + * MPC5125 have compatible PSC FIFO Controller. + * Special init not needed. + */ +static u16 mpc5125_psc_get_status(struct uart_port *port) +{ + return in_be16(&PSC_5125(port)->mpc52xx_psc_status); +} + +static u8 mpc5125_psc_get_ipcr(struct uart_port *port) +{ + return in_8(&PSC_5125(port)->mpc52xx_psc_ipcr); +} + +static void mpc5125_psc_command(struct uart_port *port, u8 cmd) +{ + out_8(&PSC_5125(port)->command, cmd); +} + +static void mpc5125_psc_set_mode(struct uart_port *port, u8 mr1, u8 mr2) +{ + out_8(&PSC_5125(port)->mr1, mr1); + out_8(&PSC_5125(port)->mr2, mr2); +} + +static void mpc5125_psc_set_rts(struct uart_port *port, int state) +{ + if (state & TIOCM_RTS) + out_8(&PSC_5125(port)->op1, MPC52xx_PSC_OP_RTS); + else + out_8(&PSC_5125(port)->op0, MPC52xx_PSC_OP_RTS); +} + +static void mpc5125_psc_enable_ms(struct uart_port *port) +{ + struct mpc5125_psc __iomem *psc = PSC_5125(port); + + /* clear D_*-bits by reading them */ + in_8(&psc->mpc52xx_psc_ipcr); + /* enable CTS and DCD as IPC interrupts */ + out_8(&psc->mpc52xx_psc_acr, MPC52xx_PSC_IEC_CTS | MPC52xx_PSC_IEC_DCD); + + port->read_status_mask |= MPC52xx_PSC_IMR_IPC; + out_be16(&psc->mpc52xx_psc_imr, port->read_status_mask); +} + +static void mpc5125_psc_set_sicr(struct uart_port *port, u32 val) +{ + out_be32(&PSC_5125(port)->sicr, val); +} + +static void mpc5125_psc_set_imr(struct uart_port *port, u16 val) +{ + out_be16(&PSC_5125(port)->mpc52xx_psc_imr, val); +} + +static u8 mpc5125_psc_get_mr1(struct uart_port *port) +{ + return in_8(&PSC_5125(port)->mr1); +} + +static struct psc_ops mpc5125_psc_ops = { + .fifo_init = mpc5125_psc_fifo_init, + .raw_rx_rdy = mpc5125_psc_raw_rx_rdy, + .raw_tx_rdy = mpc5125_psc_raw_tx_rdy, + .rx_rdy = mpc5125_psc_rx_rdy, + .tx_rdy = mpc5125_psc_tx_rdy, + .tx_empty = mpc5125_psc_tx_empty, + .stop_rx = mpc5125_psc_stop_rx, + .start_tx = mpc5125_psc_start_tx, + .stop_tx = mpc5125_psc_stop_tx, + .rx_clr_irq = mpc5125_psc_rx_clr_irq, + .tx_clr_irq = mpc5125_psc_tx_clr_irq, + .write_char = mpc5125_psc_write_char, + .read_char = mpc5125_psc_read_char, + .cw_disable_ints = mpc5125_psc_cw_disable_ints, + .cw_restore_ints = mpc5125_psc_cw_restore_ints, + .set_baudrate = mpc5125_psc_set_baudrate, + .clock_alloc = mpc512x_psc_alloc_clock, + .clock_relse = mpc512x_psc_relse_clock, + .clock = mpc512x_psc_endis_clock, + .fifoc_init = mpc512x_psc_fifoc_init, + .fifoc_uninit = mpc512x_psc_fifoc_uninit, + .get_irq = mpc512x_psc_get_irq, + .handle_irq = mpc512x_psc_handle_irq, + .get_status = mpc5125_psc_get_status, + .get_ipcr = mpc5125_psc_get_ipcr, + .command = mpc5125_psc_command, + .set_mode = mpc5125_psc_set_mode, + .set_rts = mpc5125_psc_set_rts, + .enable_ms = mpc5125_psc_enable_ms, + .set_sicr = mpc5125_psc_set_sicr, + .set_imr = mpc5125_psc_set_imr, + .get_mr1 = mpc5125_psc_get_mr1, +}; + +static struct psc_ops mpc512x_psc_ops = { + .fifo_init = mpc512x_psc_fifo_init, + .raw_rx_rdy = mpc512x_psc_raw_rx_rdy, + .raw_tx_rdy = mpc512x_psc_raw_tx_rdy, + .rx_rdy = mpc512x_psc_rx_rdy, + .tx_rdy = mpc512x_psc_tx_rdy, + .tx_empty = mpc512x_psc_tx_empty, + .stop_rx = mpc512x_psc_stop_rx, + .start_tx = mpc512x_psc_start_tx, + .stop_tx = mpc512x_psc_stop_tx, + .rx_clr_irq = mpc512x_psc_rx_clr_irq, + .tx_clr_irq = mpc512x_psc_tx_clr_irq, + .write_char = mpc512x_psc_write_char, + .read_char = mpc512x_psc_read_char, + .cw_disable_ints = mpc512x_psc_cw_disable_ints, + .cw_restore_ints = mpc512x_psc_cw_restore_ints, + .set_baudrate = mpc512x_psc_set_baudrate, + .clock_alloc = mpc512x_psc_alloc_clock, + .clock_relse = mpc512x_psc_relse_clock, + .clock = mpc512x_psc_endis_clock, + .fifoc_init = mpc512x_psc_fifoc_init, + .fifoc_uninit = mpc512x_psc_fifoc_uninit, + .get_irq = mpc512x_psc_get_irq, + .handle_irq = mpc512x_psc_handle_irq, + .get_status = mpc52xx_psc_get_status, + .get_ipcr = mpc52xx_psc_get_ipcr, + .command = mpc52xx_psc_command, + .set_mode = mpc52xx_psc_set_mode, + .set_rts = mpc52xx_psc_set_rts, + .enable_ms = mpc52xx_psc_enable_ms, + .set_sicr = mpc52xx_psc_set_sicr, + .set_imr = mpc52xx_psc_set_imr, + .get_mr1 = mpc52xx_psc_get_mr1, +}; +#endif /* CONFIG_PPC_MPC512x */ + + +static const struct psc_ops *psc_ops; + +/* ======================================================================== */ +/* UART operations */ +/* ======================================================================== */ + +static unsigned int +mpc52xx_uart_tx_empty(struct uart_port *port) +{ + return psc_ops->tx_empty(port) ? TIOCSER_TEMT : 0; +} + +static void +mpc52xx_uart_set_mctrl(struct uart_port *port, unsigned int mctrl) +{ + psc_ops->set_rts(port, mctrl & TIOCM_RTS); +} + +static unsigned int +mpc52xx_uart_get_mctrl(struct uart_port *port) +{ + unsigned int ret = TIOCM_DSR; + u8 status = psc_ops->get_ipcr(port); + + if (!(status & MPC52xx_PSC_CTS)) + ret |= TIOCM_CTS; + if (!(status & MPC52xx_PSC_DCD)) + ret |= TIOCM_CAR; + + return ret; +} + +static void +mpc52xx_uart_stop_tx(struct uart_port *port) +{ + /* port->lock taken by caller */ + psc_ops->stop_tx(port); +} + +static void +mpc52xx_uart_start_tx(struct uart_port *port) +{ + /* port->lock taken by caller */ + psc_ops->start_tx(port); +} + +static void +mpc52xx_uart_stop_rx(struct uart_port *port) +{ + /* port->lock taken by caller */ + psc_ops->stop_rx(port); +} + +static void +mpc52xx_uart_enable_ms(struct uart_port *port) +{ + psc_ops->enable_ms(port); +} + +static void +mpc52xx_uart_break_ctl(struct uart_port *port, int ctl) +{ + unsigned long flags; + spin_lock_irqsave(&port->lock, flags); + + if (ctl == -1) + psc_ops->command(port, MPC52xx_PSC_START_BRK); + else + psc_ops->command(port, MPC52xx_PSC_STOP_BRK); + + spin_unlock_irqrestore(&port->lock, flags); +} + +static int +mpc52xx_uart_startup(struct uart_port *port) +{ + int ret; + + if (psc_ops->clock) { + ret = psc_ops->clock(port, 1); + if (ret) + return ret; + } + + /* Request IRQ */ + ret = request_irq(port->irq, mpc52xx_uart_int, + port->irqflags, "mpc52xx_psc_uart", port); + if (ret) + return ret; + + /* Reset/activate the port, clear and enable interrupts */ + psc_ops->command(port, MPC52xx_PSC_RST_RX); + psc_ops->command(port, MPC52xx_PSC_RST_TX); + + psc_ops->set_sicr(port, 0); /* UART mode DCD ignored */ + + psc_ops->fifo_init(port); + + psc_ops->command(port, MPC52xx_PSC_TX_ENABLE); + psc_ops->command(port, MPC52xx_PSC_RX_ENABLE); + + return 0; +} + +static void +mpc52xx_uart_shutdown(struct uart_port *port) +{ + /* Shut down the port. Leave TX active if on a console port */ + psc_ops->command(port, MPC52xx_PSC_RST_RX); + if (!uart_console(port)) + psc_ops->command(port, MPC52xx_PSC_RST_TX); + + port->read_status_mask = 0; + psc_ops->set_imr(port, port->read_status_mask); + + if (psc_ops->clock) + psc_ops->clock(port, 0); + + /* Disable interrupt */ + psc_ops->cw_disable_ints(port); + + /* Release interrupt */ + free_irq(port->irq, port); +} + +static void +mpc52xx_uart_set_termios(struct uart_port *port, struct ktermios *new, + struct ktermios *old) +{ + unsigned long flags; + unsigned char mr1, mr2; + unsigned int j; + unsigned int baud; + + /* Prepare what we're gonna write */ + mr1 = 0; + + switch (new->c_cflag & CSIZE) { + case CS5: mr1 |= MPC52xx_PSC_MODE_5_BITS; + break; + case CS6: mr1 |= MPC52xx_PSC_MODE_6_BITS; + break; + case CS7: mr1 |= MPC52xx_PSC_MODE_7_BITS; + break; + case CS8: + default: mr1 |= MPC52xx_PSC_MODE_8_BITS; + } + + if (new->c_cflag & PARENB) { + if (new->c_cflag & CMSPAR) + mr1 |= MPC52xx_PSC_MODE_PARFORCE; + + /* With CMSPAR, PARODD also means high parity (same as termios) */ + mr1 |= (new->c_cflag & PARODD) ? + MPC52xx_PSC_MODE_PARODD : MPC52xx_PSC_MODE_PAREVEN; + } else { + mr1 |= MPC52xx_PSC_MODE_PARNONE; + } + + mr2 = 0; + + if (new->c_cflag & CSTOPB) + mr2 |= MPC52xx_PSC_MODE_TWO_STOP; + else + mr2 |= ((new->c_cflag & CSIZE) == CS5) ? + MPC52xx_PSC_MODE_ONE_STOP_5_BITS : + MPC52xx_PSC_MODE_ONE_STOP; + + if (new->c_cflag & CRTSCTS) { + mr1 |= MPC52xx_PSC_MODE_RXRTS; + mr2 |= MPC52xx_PSC_MODE_TXCTS; + } + + /* Get the lock */ + spin_lock_irqsave(&port->lock, flags); + + /* Do our best to flush TX & RX, so we don't lose anything */ + /* But we don't wait indefinitely ! */ + j = 5000000; /* Maximum wait */ + /* FIXME Can't receive chars since set_termios might be called at early + * boot for the console, all stuff is not yet ready to receive at that + * time and that just makes the kernel oops */ + /* while (j-- && mpc52xx_uart_int_rx_chars(port)); */ + while (!mpc52xx_uart_tx_empty(port) && --j) + udelay(1); + + if (!j) + printk(KERN_ERR "mpc52xx_uart.c: " + "Unable to flush RX & TX fifos in-time in set_termios." + "Some chars may have been lost.\n"); + + /* Reset the TX & RX */ + psc_ops->command(port, MPC52xx_PSC_RST_RX); + psc_ops->command(port, MPC52xx_PSC_RST_TX); + + /* Send new mode settings */ + psc_ops->set_mode(port, mr1, mr2); + baud = psc_ops->set_baudrate(port, new, old); + + /* Update the per-port timeout */ + uart_update_timeout(port, new->c_cflag, baud); + + if (UART_ENABLE_MS(port, new->c_cflag)) + mpc52xx_uart_enable_ms(port); + + /* Reenable TX & RX */ + psc_ops->command(port, MPC52xx_PSC_TX_ENABLE); + psc_ops->command(port, MPC52xx_PSC_RX_ENABLE); + + /* We're all set, release the lock */ + spin_unlock_irqrestore(&port->lock, flags); +} + +static const char * +mpc52xx_uart_type(struct uart_port *port) +{ + /* + * We keep using PORT_MPC52xx for historic reasons although it applies + * for MPC512x, too, but print "MPC5xxx" to not irritate users + */ + return port->type == PORT_MPC52xx ? "MPC5xxx PSC" : NULL; +} + +static void +mpc52xx_uart_release_port(struct uart_port *port) +{ + if (psc_ops->clock_relse) + psc_ops->clock_relse(port); + + /* remapped by us ? */ + if (port->flags & UPF_IOREMAP) { + iounmap(port->membase); + port->membase = NULL; + } + + release_mem_region(port->mapbase, sizeof(struct mpc52xx_psc)); +} + +static int +mpc52xx_uart_request_port(struct uart_port *port) +{ + int err; + + if (port->flags & UPF_IOREMAP) /* Need to remap ? */ + port->membase = ioremap(port->mapbase, + sizeof(struct mpc52xx_psc)); + + if (!port->membase) + return -EINVAL; + + err = request_mem_region(port->mapbase, sizeof(struct mpc52xx_psc), + "mpc52xx_psc_uart") != NULL ? 0 : -EBUSY; + + if (err) + goto out_membase; + + if (psc_ops->clock_alloc) { + err = psc_ops->clock_alloc(port); + if (err) + goto out_mapregion; + } + + return 0; + +out_mapregion: + release_mem_region(port->mapbase, sizeof(struct mpc52xx_psc)); +out_membase: + if (port->flags & UPF_IOREMAP) { + iounmap(port->membase); + port->membase = NULL; + } + return err; +} + +static void +mpc52xx_uart_config_port(struct uart_port *port, int flags) +{ + if ((flags & UART_CONFIG_TYPE) + && (mpc52xx_uart_request_port(port) == 0)) + port->type = PORT_MPC52xx; +} + +static int +mpc52xx_uart_verify_port(struct uart_port *port, struct serial_struct *ser) +{ + if (ser->type != PORT_UNKNOWN && ser->type != PORT_MPC52xx) + return -EINVAL; + + if ((ser->irq != port->irq) || + (ser->io_type != UPIO_MEM) || + (ser->baud_base != port->uartclk) || + (ser->iomem_base != (void *)port->mapbase) || + (ser->hub6 != 0)) + return -EINVAL; + + return 0; +} + + +static struct uart_ops mpc52xx_uart_ops = { + .tx_empty = mpc52xx_uart_tx_empty, + .set_mctrl = mpc52xx_uart_set_mctrl, + .get_mctrl = mpc52xx_uart_get_mctrl, + .stop_tx = mpc52xx_uart_stop_tx, + .start_tx = mpc52xx_uart_start_tx, + .stop_rx = mpc52xx_uart_stop_rx, + .enable_ms = mpc52xx_uart_enable_ms, + .break_ctl = mpc52xx_uart_break_ctl, + .startup = mpc52xx_uart_startup, + .shutdown = mpc52xx_uart_shutdown, + .set_termios = mpc52xx_uart_set_termios, +/* .pm = mpc52xx_uart_pm, Not supported yet */ + .type = mpc52xx_uart_type, + .release_port = mpc52xx_uart_release_port, + .request_port = mpc52xx_uart_request_port, + .config_port = mpc52xx_uart_config_port, + .verify_port = mpc52xx_uart_verify_port +}; + + +/* ======================================================================== */ +/* Interrupt handling */ +/* ======================================================================== */ + +static inline int +mpc52xx_uart_int_rx_chars(struct uart_port *port) +{ + struct tty_port *tport = &port->state->port; + unsigned char ch, flag; + unsigned short status; + + /* While we can read, do so ! */ + while (psc_ops->raw_rx_rdy(port)) { + /* Get the char */ + ch = psc_ops->read_char(port); + + /* Handle sysreq char */ +#ifdef SUPPORT_SYSRQ + if (uart_handle_sysrq_char(port, ch)) { + port->sysrq = 0; + continue; + } +#endif + + /* Store it */ + + flag = TTY_NORMAL; + port->icount.rx++; + + status = psc_ops->get_status(port); + + if (status & (MPC52xx_PSC_SR_PE | + MPC52xx_PSC_SR_FE | + MPC52xx_PSC_SR_RB)) { + + if (status & MPC52xx_PSC_SR_RB) { + flag = TTY_BREAK; + uart_handle_break(port); + port->icount.brk++; + } else if (status & MPC52xx_PSC_SR_PE) { + flag = TTY_PARITY; + port->icount.parity++; + } + else if (status & MPC52xx_PSC_SR_FE) { + flag = TTY_FRAME; + port->icount.frame++; + } + + /* Clear error condition */ + psc_ops->command(port, MPC52xx_PSC_RST_ERR_STAT); + + } + tty_insert_flip_char(tport, ch, flag); + if (status & MPC52xx_PSC_SR_OE) { + /* + * Overrun is special, since it's + * reported immediately, and doesn't + * affect the current character + */ + tty_insert_flip_char(tport, 0, TTY_OVERRUN); + port->icount.overrun++; + } + } + + spin_unlock(&port->lock); + tty_flip_buffer_push(tport); + spin_lock(&port->lock); + + return psc_ops->raw_rx_rdy(port); +} + +static inline int +mpc52xx_uart_int_tx_chars(struct uart_port *port) +{ + struct circ_buf *xmit = &port->state->xmit; + + /* Process out of band chars */ + if (port->x_char) { + psc_ops->write_char(port, port->x_char); + port->icount.tx++; + port->x_char = 0; + return 1; + } + + /* Nothing to do ? */ + if (uart_circ_empty(xmit) || uart_tx_stopped(port)) { + mpc52xx_uart_stop_tx(port); + return 0; + } + + /* Send chars */ + while (psc_ops->raw_tx_rdy(port)) { + psc_ops->write_char(port, xmit->buf[xmit->tail]); + xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); + port->icount.tx++; + if (uart_circ_empty(xmit)) + break; + } + + /* Wake up */ + if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + uart_write_wakeup(port); + + /* Maybe we're done after all */ + if (uart_circ_empty(xmit)) { + mpc52xx_uart_stop_tx(port); + return 0; + } + + return 1; +} + +static irqreturn_t +mpc5xxx_uart_process_int(struct uart_port *port) +{ + unsigned long pass = ISR_PASS_LIMIT; + unsigned int keepgoing; + u8 status; + + /* While we have stuff to do, we continue */ + do { + /* If we don't find anything to do, we stop */ + keepgoing = 0; + + psc_ops->rx_clr_irq(port); + if (psc_ops->rx_rdy(port)) + keepgoing |= mpc52xx_uart_int_rx_chars(port); + + psc_ops->tx_clr_irq(port); + if (psc_ops->tx_rdy(port)) + keepgoing |= mpc52xx_uart_int_tx_chars(port); + + status = psc_ops->get_ipcr(port); + if (status & MPC52xx_PSC_D_DCD) + uart_handle_dcd_change(port, !(status & MPC52xx_PSC_DCD)); + + if (status & MPC52xx_PSC_D_CTS) + uart_handle_cts_change(port, !(status & MPC52xx_PSC_CTS)); + + /* Limit number of iteration */ + if (!(--pass)) + keepgoing = 0; + + } while (keepgoing); + + return IRQ_HANDLED; +} + +static irqreturn_t +mpc52xx_uart_int(int irq, void *dev_id) +{ + struct uart_port *port = dev_id; + irqreturn_t ret; + + spin_lock(&port->lock); + + ret = psc_ops->handle_irq(port); + + spin_unlock(&port->lock); + + return ret; +} + +/* ======================================================================== */ +/* Console ( if applicable ) */ +/* ======================================================================== */ + +#ifdef CONFIG_SERIAL_MPC52xx_CONSOLE + +static void __init +mpc52xx_console_get_options(struct uart_port *port, + int *baud, int *parity, int *bits, int *flow) +{ + unsigned char mr1; + + pr_debug("mpc52xx_console_get_options(port=%p)\n", port); + + /* Read the mode registers */ + mr1 = psc_ops->get_mr1(port); + + /* CT{U,L}R are write-only ! */ + *baud = CONFIG_SERIAL_MPC52xx_CONSOLE_BAUD; + + /* Parse them */ + switch (mr1 & MPC52xx_PSC_MODE_BITS_MASK) { + case MPC52xx_PSC_MODE_5_BITS: + *bits = 5; + break; + case MPC52xx_PSC_MODE_6_BITS: + *bits = 6; + break; + case MPC52xx_PSC_MODE_7_BITS: + *bits = 7; + break; + case MPC52xx_PSC_MODE_8_BITS: + default: + *bits = 8; + } + + if (mr1 & MPC52xx_PSC_MODE_PARNONE) + *parity = 'n'; + else + *parity = mr1 & MPC52xx_PSC_MODE_PARODD ? 'o' : 'e'; +} + +static void +mpc52xx_console_write(struct console *co, const char *s, unsigned int count) +{ + struct uart_port *port = &mpc52xx_uart_ports[co->index]; + unsigned int i, j; + + /* Disable interrupts */ + psc_ops->cw_disable_ints(port); + + /* Wait the TX buffer to be empty */ + j = 5000000; /* Maximum wait */ + while (!mpc52xx_uart_tx_empty(port) && --j) + udelay(1); + + /* Write all the chars */ + for (i = 0; i < count; i++, s++) { + /* Line return handling */ + if (*s == '\n') + psc_ops->write_char(port, '\r'); + + /* Send the char */ + psc_ops->write_char(port, *s); + + /* Wait the TX buffer to be empty */ + j = 20000; /* Maximum wait */ + while (!mpc52xx_uart_tx_empty(port) && --j) + udelay(1); + } + + /* Restore interrupt state */ + psc_ops->cw_restore_ints(port); +} + + +static int __init +mpc52xx_console_setup(struct console *co, char *options) +{ + struct uart_port *port = &mpc52xx_uart_ports[co->index]; + struct device_node *np = mpc52xx_uart_nodes[co->index]; + unsigned int uartclk; + struct resource res; + int ret; + + int baud = CONFIG_SERIAL_MPC52xx_CONSOLE_BAUD; + int bits = 8; + int parity = 'n'; + int flow = 'n'; + + pr_debug("mpc52xx_console_setup co=%p, co->index=%i, options=%s\n", + co, co->index, options); + + if ((co->index < 0) || (co->index >= MPC52xx_PSC_MAXNUM)) { + pr_debug("PSC%x out of range\n", co->index); + return -EINVAL; + } + + if (!np) { + pr_debug("PSC%x not found in device tree\n", co->index); + return -EINVAL; + } + + pr_debug("Console on ttyPSC%x is %s\n", + co->index, mpc52xx_uart_nodes[co->index]->full_name); + + /* Fetch register locations */ + ret = of_address_to_resource(np, 0, &res); + if (ret) { + pr_debug("Could not get resources for PSC%x\n", co->index); + return ret; + } + + uartclk = mpc5xxx_get_bus_frequency(np); + if (uartclk == 0) { + pr_debug("Could not find uart clock frequency!\n"); + return -EINVAL; + } + + /* Basic port init. Needed since we use some uart_??? func before + * real init for early access */ + spin_lock_init(&port->lock); + port->uartclk = uartclk; + port->ops = &mpc52xx_uart_ops; + port->mapbase = res.start; + port->membase = ioremap(res.start, sizeof(struct mpc52xx_psc)); + port->irq = irq_of_parse_and_map(np, 0); + + if (port->membase == NULL) + return -EINVAL; + + pr_debug("mpc52xx-psc uart at %p, mapped to %p, irq=%x, freq=%i\n", + (void *)port->mapbase, port->membase, + port->irq, port->uartclk); + + /* Setup the port parameters accoding to options */ + if (options) + uart_parse_options(options, &baud, &parity, &bits, &flow); + else + mpc52xx_console_get_options(port, &baud, &parity, &bits, &flow); + + pr_debug("Setting console parameters: %i %i%c1 flow=%c\n", + baud, bits, parity, flow); + + return uart_set_options(port, co, baud, parity, bits, flow); +} + + +static struct uart_driver mpc52xx_uart_driver; + +static struct console mpc52xx_console = { + .name = "ttyPSC", + .write = mpc52xx_console_write, + .device = uart_console_device, + .setup = mpc52xx_console_setup, + .flags = CON_PRINTBUFFER, + .index = -1, /* Specified on the cmdline (e.g. console=ttyPSC0) */ + .data = &mpc52xx_uart_driver, +}; + + +static int __init +mpc52xx_console_init(void) +{ + mpc52xx_uart_of_enumerate(); + register_console(&mpc52xx_console); + return 0; +} + +console_initcall(mpc52xx_console_init); + +#define MPC52xx_PSC_CONSOLE &mpc52xx_console +#else +#define MPC52xx_PSC_CONSOLE NULL +#endif + + +/* ======================================================================== */ +/* UART Driver */ +/* ======================================================================== */ + +static struct uart_driver mpc52xx_uart_driver = { + .driver_name = "mpc52xx_psc_uart", + .dev_name = "ttyPSC", + .major = SERIAL_PSC_MAJOR, + .minor = SERIAL_PSC_MINOR, + .nr = MPC52xx_PSC_MAXNUM, + .cons = MPC52xx_PSC_CONSOLE, +}; + +/* ======================================================================== */ +/* OF Platform Driver */ +/* ======================================================================== */ + +static const struct of_device_id mpc52xx_uart_of_match[] = { +#ifdef CONFIG_PPC_MPC52xx + { .compatible = "fsl,mpc5200b-psc-uart", .data = &mpc5200b_psc_ops, }, + { .compatible = "fsl,mpc5200-psc-uart", .data = &mpc52xx_psc_ops, }, + /* binding used by old lite5200 device trees: */ + { .compatible = "mpc5200-psc-uart", .data = &mpc52xx_psc_ops, }, + /* binding used by efika: */ + { .compatible = "mpc5200-serial", .data = &mpc52xx_psc_ops, }, +#endif +#ifdef CONFIG_PPC_MPC512x + { .compatible = "fsl,mpc5121-psc-uart", .data = &mpc512x_psc_ops, }, + { .compatible = "fsl,mpc5125-psc-uart", .data = &mpc5125_psc_ops, }, +#endif + {}, +}; + +static int mpc52xx_uart_of_probe(struct platform_device *op) +{ + int idx = -1; + unsigned int uartclk; + struct uart_port *port = NULL; + struct resource res; + int ret; + + /* Check validity & presence */ + for (idx = 0; idx < MPC52xx_PSC_MAXNUM; idx++) + if (mpc52xx_uart_nodes[idx] == op->dev.of_node) + break; + if (idx >= MPC52xx_PSC_MAXNUM) + return -EINVAL; + pr_debug("Found %s assigned to ttyPSC%x\n", + mpc52xx_uart_nodes[idx]->full_name, idx); + + /* set the uart clock to the input clock of the psc, the different + * prescalers are taken into account in the set_baudrate() methods + * of the respective chip */ + uartclk = mpc5xxx_get_bus_frequency(op->dev.of_node); + if (uartclk == 0) { + dev_dbg(&op->dev, "Could not find uart clock frequency!\n"); + return -EINVAL; + } + + /* Init the port structure */ + port = &mpc52xx_uart_ports[idx]; + + spin_lock_init(&port->lock); + port->uartclk = uartclk; + port->fifosize = 512; + port->iotype = UPIO_MEM; + port->flags = UPF_BOOT_AUTOCONF | + (uart_console(port) ? 0 : UPF_IOREMAP); + port->line = idx; + port->ops = &mpc52xx_uart_ops; + port->dev = &op->dev; + + /* Search for IRQ and mapbase */ + ret = of_address_to_resource(op->dev.of_node, 0, &res); + if (ret) + return ret; + + port->mapbase = res.start; + if (!port->mapbase) { + dev_dbg(&op->dev, "Could not allocate resources for PSC\n"); + return -EINVAL; + } + + psc_ops->get_irq(port, op->dev.of_node); + if (port->irq == 0) { + dev_dbg(&op->dev, "Could not get irq\n"); + return -EINVAL; + } + + dev_dbg(&op->dev, "mpc52xx-psc uart at %p, irq=%x, freq=%i\n", + (void *)port->mapbase, port->irq, port->uartclk); + + /* Add the port to the uart sub-system */ + ret = uart_add_one_port(&mpc52xx_uart_driver, port); + if (ret) + return ret; + + platform_set_drvdata(op, (void *)port); + return 0; +} + +static int +mpc52xx_uart_of_remove(struct platform_device *op) +{ + struct uart_port *port = platform_get_drvdata(op); + + if (port) + uart_remove_one_port(&mpc52xx_uart_driver, port); + + return 0; +} + +#ifdef CONFIG_PM +static int +mpc52xx_uart_of_suspend(struct platform_device *op, pm_message_t state) +{ + struct uart_port *port = platform_get_drvdata(op); + + if (port) + uart_suspend_port(&mpc52xx_uart_driver, port); + + return 0; +} + +static int +mpc52xx_uart_of_resume(struct platform_device *op) +{ + struct uart_port *port = platform_get_drvdata(op); + + if (port) + uart_resume_port(&mpc52xx_uart_driver, port); + + return 0; +} +#endif + +static void +mpc52xx_uart_of_assign(struct device_node *np) +{ + int i; + + /* Find the first free PSC number */ + for (i = 0; i < MPC52xx_PSC_MAXNUM; i++) { + if (mpc52xx_uart_nodes[i] == NULL) { + of_node_get(np); + mpc52xx_uart_nodes[i] = np; + return; + } + } +} + +static void +mpc52xx_uart_of_enumerate(void) +{ + static int enum_done; + struct device_node *np; + const struct of_device_id *match; + int i; + + if (enum_done) + return; + + /* Assign index to each PSC in device tree */ + for_each_matching_node(np, mpc52xx_uart_of_match) { + match = of_match_node(mpc52xx_uart_of_match, np); + psc_ops = match->data; + mpc52xx_uart_of_assign(np); + } + + enum_done = 1; + + for (i = 0; i < MPC52xx_PSC_MAXNUM; i++) { + if (mpc52xx_uart_nodes[i]) + pr_debug("%s assigned to ttyPSC%x\n", + mpc52xx_uart_nodes[i]->full_name, i); + } +} + +MODULE_DEVICE_TABLE(of, mpc52xx_uart_of_match); + +static struct platform_driver mpc52xx_uart_of_driver = { + .probe = mpc52xx_uart_of_probe, + .remove = mpc52xx_uart_of_remove, +#ifdef CONFIG_PM + .suspend = mpc52xx_uart_of_suspend, + .resume = mpc52xx_uart_of_resume, +#endif + .driver = { + .name = "mpc52xx-psc-uart", + .of_match_table = mpc52xx_uart_of_match, + }, +}; + + +/* ======================================================================== */ +/* Module */ +/* ======================================================================== */ + +static int __init +mpc52xx_uart_init(void) +{ + int ret; + + printk(KERN_INFO "Serial: MPC52xx PSC UART driver\n"); + + ret = uart_register_driver(&mpc52xx_uart_driver); + if (ret) { + printk(KERN_ERR "%s: uart_register_driver failed (%i)\n", + __FILE__, ret); + return ret; + } + + mpc52xx_uart_of_enumerate(); + + /* + * Map the PSC FIFO Controller and init if on MPC512x. + */ + if (psc_ops && psc_ops->fifoc_init) { + ret = psc_ops->fifoc_init(); + if (ret) + goto err_init; + } + + ret = platform_driver_register(&mpc52xx_uart_of_driver); + if (ret) { + printk(KERN_ERR "%s: platform_driver_register failed (%i)\n", + __FILE__, ret); + goto err_reg; + } + + return 0; +err_reg: + if (psc_ops && psc_ops->fifoc_uninit) + psc_ops->fifoc_uninit(); +err_init: + uart_unregister_driver(&mpc52xx_uart_driver); + return ret; +} + +static void __exit +mpc52xx_uart_exit(void) +{ + if (psc_ops->fifoc_uninit) + psc_ops->fifoc_uninit(); + + platform_driver_unregister(&mpc52xx_uart_of_driver); + uart_unregister_driver(&mpc52xx_uart_driver); +} + + +module_init(mpc52xx_uart_init); +module_exit(mpc52xx_uart_exit); + +MODULE_AUTHOR("Sylvain Munaut <tnt@246tNt.com>"); +MODULE_DESCRIPTION("Freescale MPC52xx PSC UART"); +MODULE_LICENSE("GPL"); |