diff options
Diffstat (limited to 'drivers/tty/serial/msm_serial.c')
| -rw-r--r-- | drivers/tty/serial/msm_serial.c | 1138 |
1 files changed, 1138 insertions, 0 deletions
diff --git a/drivers/tty/serial/msm_serial.c b/drivers/tty/serial/msm_serial.c new file mode 100644 index 000000000..b73889c8e --- /dev/null +++ b/drivers/tty/serial/msm_serial.c @@ -0,0 +1,1138 @@ +/* + * Driver for msm7k serial device and console + * + * Copyright (C) 2007 Google, Inc. + * Author: Robert Love <rlove@google.com> + * Copyright (c) 2011, Code Aurora Forum. All rights reserved. + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#if defined(CONFIG_SERIAL_MSM_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) +# define SUPPORT_SYSRQ +#endif + +#include <linux/atomic.h> +#include <linux/hrtimer.h> +#include <linux/module.h> +#include <linux/io.h> +#include <linux/ioport.h> +#include <linux/irq.h> +#include <linux/init.h> +#include <linux/console.h> +#include <linux/tty.h> +#include <linux/tty_flip.h> +#include <linux/serial_core.h> +#include <linux/serial.h> +#include <linux/clk.h> +#include <linux/platform_device.h> +#include <linux/delay.h> +#include <linux/of.h> +#include <linux/of_device.h> + +#include "msm_serial.h" + +enum { + UARTDM_1P1 = 1, + UARTDM_1P2, + UARTDM_1P3, + UARTDM_1P4, +}; + +struct msm_port { + struct uart_port uart; + char name[16]; + struct clk *clk; + struct clk *pclk; + unsigned int imr; + int is_uartdm; + unsigned int old_snap_state; + bool break_detected; +}; + +static inline void wait_for_xmitr(struct uart_port *port) +{ + while (!(msm_read(port, UART_SR) & UART_SR_TX_EMPTY)) { + if (msm_read(port, UART_ISR) & UART_ISR_TX_READY) + break; + udelay(1); + } + msm_write(port, UART_CR_CMD_RESET_TX_READY, UART_CR); +} + +static void msm_stop_tx(struct uart_port *port) +{ + struct msm_port *msm_port = UART_TO_MSM(port); + + msm_port->imr &= ~UART_IMR_TXLEV; + msm_write(port, msm_port->imr, UART_IMR); +} + +static void msm_start_tx(struct uart_port *port) +{ + struct msm_port *msm_port = UART_TO_MSM(port); + + msm_port->imr |= UART_IMR_TXLEV; + msm_write(port, msm_port->imr, UART_IMR); +} + +static void msm_stop_rx(struct uart_port *port) +{ + struct msm_port *msm_port = UART_TO_MSM(port); + + msm_port->imr &= ~(UART_IMR_RXLEV | UART_IMR_RXSTALE); + msm_write(port, msm_port->imr, UART_IMR); +} + +static void msm_enable_ms(struct uart_port *port) +{ + struct msm_port *msm_port = UART_TO_MSM(port); + + msm_port->imr |= UART_IMR_DELTA_CTS; + msm_write(port, msm_port->imr, UART_IMR); +} + +static void handle_rx_dm(struct uart_port *port, unsigned int misr) +{ + struct tty_port *tport = &port->state->port; + unsigned int sr; + int count = 0; + struct msm_port *msm_port = UART_TO_MSM(port); + + if ((msm_read(port, UART_SR) & UART_SR_OVERRUN)) { + port->icount.overrun++; + tty_insert_flip_char(tport, 0, TTY_OVERRUN); + msm_write(port, UART_CR_CMD_RESET_ERR, UART_CR); + } + + if (misr & UART_IMR_RXSTALE) { + count = msm_read(port, UARTDM_RX_TOTAL_SNAP) - + msm_port->old_snap_state; + msm_port->old_snap_state = 0; + } else { + count = 4 * (msm_read(port, UART_RFWR)); + msm_port->old_snap_state += count; + } + + /* TODO: Precise error reporting */ + + port->icount.rx += count; + + while (count > 0) { + unsigned char buf[4]; + int sysrq, r_count, i; + + sr = msm_read(port, UART_SR); + if ((sr & UART_SR_RX_READY) == 0) { + msm_port->old_snap_state -= count; + break; + } + + ioread32_rep(port->membase + UARTDM_RF, buf, 1); + r_count = min_t(int, count, sizeof(buf)); + + for (i = 0; i < r_count; i++) { + char flag = TTY_NORMAL; + + if (msm_port->break_detected && buf[i] == 0) { + port->icount.brk++; + flag = TTY_BREAK; + msm_port->break_detected = false; + if (uart_handle_break(port)) + continue; + } + + if (!(port->read_status_mask & UART_SR_RX_BREAK)) + flag = TTY_NORMAL; + + spin_unlock(&port->lock); + sysrq = uart_handle_sysrq_char(port, buf[i]); + spin_lock(&port->lock); + if (!sysrq) + tty_insert_flip_char(tport, buf[i], flag); + } + count -= r_count; + } + + spin_unlock(&port->lock); + tty_flip_buffer_push(tport); + spin_lock(&port->lock); + + if (misr & (UART_IMR_RXSTALE)) + msm_write(port, UART_CR_CMD_RESET_STALE_INT, UART_CR); + msm_write(port, 0xFFFFFF, UARTDM_DMRX); + msm_write(port, UART_CR_CMD_STALE_EVENT_ENABLE, UART_CR); +} + +static void handle_rx(struct uart_port *port) +{ + struct tty_port *tport = &port->state->port; + unsigned int sr; + + /* + * Handle overrun. My understanding of the hardware is that overrun + * is not tied to the RX buffer, so we handle the case out of band. + */ + if ((msm_read(port, UART_SR) & UART_SR_OVERRUN)) { + port->icount.overrun++; + tty_insert_flip_char(tport, 0, TTY_OVERRUN); + msm_write(port, UART_CR_CMD_RESET_ERR, UART_CR); + } + + /* and now the main RX loop */ + while ((sr = msm_read(port, UART_SR)) & UART_SR_RX_READY) { + unsigned int c; + char flag = TTY_NORMAL; + int sysrq; + + c = msm_read(port, UART_RF); + + if (sr & UART_SR_RX_BREAK) { + port->icount.brk++; + if (uart_handle_break(port)) + continue; + } else if (sr & UART_SR_PAR_FRAME_ERR) { + port->icount.frame++; + } else { + port->icount.rx++; + } + + /* Mask conditions we're ignorning. */ + sr &= port->read_status_mask; + + if (sr & UART_SR_RX_BREAK) + flag = TTY_BREAK; + else if (sr & UART_SR_PAR_FRAME_ERR) + flag = TTY_FRAME; + + spin_unlock(&port->lock); + sysrq = uart_handle_sysrq_char(port, c); + spin_lock(&port->lock); + if (!sysrq) + tty_insert_flip_char(tport, c, flag); + } + + spin_unlock(&port->lock); + tty_flip_buffer_push(tport); + spin_lock(&port->lock); +} + +static void reset_dm_count(struct uart_port *port, int count) +{ + wait_for_xmitr(port); + msm_write(port, count, UARTDM_NCF_TX); + msm_read(port, UARTDM_NCF_TX); +} + +static void handle_tx(struct uart_port *port) +{ + struct circ_buf *xmit = &port->state->xmit; + struct msm_port *msm_port = UART_TO_MSM(port); + unsigned int tx_count, num_chars; + unsigned int tf_pointer = 0; + void __iomem *tf; + + if (msm_port->is_uartdm) + tf = port->membase + UARTDM_TF; + else + tf = port->membase + UART_TF; + + tx_count = uart_circ_chars_pending(xmit); + tx_count = min3(tx_count, (unsigned int)UART_XMIT_SIZE - xmit->tail, + port->fifosize); + + if (port->x_char) { + if (msm_port->is_uartdm) + reset_dm_count(port, tx_count + 1); + + iowrite8_rep(tf, &port->x_char, 1); + port->icount.tx++; + port->x_char = 0; + } else if (tx_count && msm_port->is_uartdm) { + reset_dm_count(port, tx_count); + } + + while (tf_pointer < tx_count) { + int i; + char buf[4] = { 0 }; + + if (!(msm_read(port, UART_SR) & UART_SR_TX_READY)) + break; + + if (msm_port->is_uartdm) + num_chars = min(tx_count - tf_pointer, + (unsigned int)sizeof(buf)); + else + num_chars = 1; + + for (i = 0; i < num_chars; i++) { + buf[i] = xmit->buf[xmit->tail + i]; + port->icount.tx++; + } + + iowrite32_rep(tf, buf, 1); + xmit->tail = (xmit->tail + num_chars) & (UART_XMIT_SIZE - 1); + tf_pointer += num_chars; + } + + /* disable tx interrupts if nothing more to send */ + if (uart_circ_empty(xmit)) + msm_stop_tx(port); + + if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + uart_write_wakeup(port); +} + +static void handle_delta_cts(struct uart_port *port) +{ + msm_write(port, UART_CR_CMD_RESET_CTS, UART_CR); + port->icount.cts++; + wake_up_interruptible(&port->state->port.delta_msr_wait); +} + +static irqreturn_t msm_irq(int irq, void *dev_id) +{ + struct uart_port *port = dev_id; + struct msm_port *msm_port = UART_TO_MSM(port); + unsigned int misr; + + spin_lock(&port->lock); + misr = msm_read(port, UART_MISR); + msm_write(port, 0, UART_IMR); /* disable interrupt */ + + if (misr & UART_IMR_RXBREAK_START) { + msm_port->break_detected = true; + msm_write(port, UART_CR_CMD_RESET_RXBREAK_START, UART_CR); + } + + if (misr & (UART_IMR_RXLEV | UART_IMR_RXSTALE)) { + if (msm_port->is_uartdm) + handle_rx_dm(port, misr); + else + handle_rx(port); + } + if (misr & UART_IMR_TXLEV) + handle_tx(port); + if (misr & UART_IMR_DELTA_CTS) + handle_delta_cts(port); + + msm_write(port, msm_port->imr, UART_IMR); /* restore interrupt */ + spin_unlock(&port->lock); + + return IRQ_HANDLED; +} + +static unsigned int msm_tx_empty(struct uart_port *port) +{ + return (msm_read(port, UART_SR) & UART_SR_TX_EMPTY) ? TIOCSER_TEMT : 0; +} + +static unsigned int msm_get_mctrl(struct uart_port *port) +{ + return TIOCM_CAR | TIOCM_CTS | TIOCM_DSR | TIOCM_RTS; +} + +static void msm_reset(struct uart_port *port) +{ + struct msm_port *msm_port = UART_TO_MSM(port); + + /* reset everything */ + msm_write(port, UART_CR_CMD_RESET_RX, UART_CR); + msm_write(port, UART_CR_CMD_RESET_TX, UART_CR); + msm_write(port, UART_CR_CMD_RESET_ERR, UART_CR); + msm_write(port, UART_CR_CMD_RESET_BREAK_INT, UART_CR); + msm_write(port, UART_CR_CMD_RESET_CTS, UART_CR); + msm_write(port, UART_CR_CMD_SET_RFR, UART_CR); + + /* Disable DM modes */ + if (msm_port->is_uartdm) + msm_write(port, 0, UARTDM_DMEN); +} + +static void msm_set_mctrl(struct uart_port *port, unsigned int mctrl) +{ + unsigned int mr; + + mr = msm_read(port, UART_MR1); + + if (!(mctrl & TIOCM_RTS)) { + mr &= ~UART_MR1_RX_RDY_CTL; + msm_write(port, mr, UART_MR1); + msm_write(port, UART_CR_CMD_RESET_RFR, UART_CR); + } else { + mr |= UART_MR1_RX_RDY_CTL; + msm_write(port, mr, UART_MR1); + } +} + +static void msm_break_ctl(struct uart_port *port, int break_ctl) +{ + if (break_ctl) + msm_write(port, UART_CR_CMD_START_BREAK, UART_CR); + else + msm_write(port, UART_CR_CMD_STOP_BREAK, UART_CR); +} + +struct msm_baud_map { + u16 divisor; + u8 code; + u8 rxstale; +}; + +static const struct msm_baud_map * +msm_find_best_baud(struct uart_port *port, unsigned int baud) +{ + unsigned int i, divisor; + const struct msm_baud_map *entry; + static const struct msm_baud_map table[] = { + { 1536, 0x00, 1 }, + { 768, 0x11, 1 }, + { 384, 0x22, 1 }, + { 192, 0x33, 1 }, + { 96, 0x44, 1 }, + { 48, 0x55, 1 }, + { 32, 0x66, 1 }, + { 24, 0x77, 1 }, + { 16, 0x88, 1 }, + { 12, 0x99, 6 }, + { 8, 0xaa, 6 }, + { 6, 0xbb, 6 }, + { 4, 0xcc, 6 }, + { 3, 0xdd, 8 }, + { 2, 0xee, 16 }, + { 1, 0xff, 31 }, + }; + + divisor = uart_get_divisor(port, baud); + + for (i = 0, entry = table; i < ARRAY_SIZE(table); i++, entry++) + if (entry->divisor <= divisor) + break; + + return entry; /* Default to smallest divider */ +} + +static int msm_set_baud_rate(struct uart_port *port, unsigned int baud) +{ + unsigned int rxstale, watermark; + struct msm_port *msm_port = UART_TO_MSM(port); + const struct msm_baud_map *entry; + + entry = msm_find_best_baud(port, baud); + + msm_write(port, entry->code, UART_CSR); + + /* RX stale watermark */ + rxstale = entry->rxstale; + watermark = UART_IPR_STALE_LSB & rxstale; + watermark |= UART_IPR_RXSTALE_LAST; + watermark |= UART_IPR_STALE_TIMEOUT_MSB & (rxstale << 2); + msm_write(port, watermark, UART_IPR); + + /* set RX watermark */ + watermark = (port->fifosize * 3) / 4; + msm_write(port, watermark, UART_RFWR); + + /* set TX watermark */ + msm_write(port, 10, UART_TFWR); + + msm_write(port, UART_CR_CMD_PROTECTION_EN, UART_CR); + msm_reset(port); + + /* Enable RX and TX */ + msm_write(port, UART_CR_TX_ENABLE | UART_CR_RX_ENABLE, UART_CR); + + /* turn on RX and CTS interrupts */ + msm_port->imr = UART_IMR_RXLEV | UART_IMR_RXSTALE | + UART_IMR_CURRENT_CTS | UART_IMR_RXBREAK_START; + + msm_write(port, msm_port->imr, UART_IMR); + + if (msm_port->is_uartdm) { + msm_write(port, UART_CR_CMD_RESET_STALE_INT, UART_CR); + msm_write(port, 0xFFFFFF, UARTDM_DMRX); + msm_write(port, UART_CR_CMD_STALE_EVENT_ENABLE, UART_CR); + } + + return baud; +} + +static void msm_init_clock(struct uart_port *port) +{ + struct msm_port *msm_port = UART_TO_MSM(port); + + clk_prepare_enable(msm_port->clk); + clk_prepare_enable(msm_port->pclk); + msm_serial_set_mnd_regs(port); +} + +static int msm_startup(struct uart_port *port) +{ + struct msm_port *msm_port = UART_TO_MSM(port); + unsigned int data, rfr_level; + int ret; + + snprintf(msm_port->name, sizeof(msm_port->name), + "msm_serial%d", port->line); + + ret = request_irq(port->irq, msm_irq, IRQF_TRIGGER_HIGH, + msm_port->name, port); + if (unlikely(ret)) + return ret; + + msm_init_clock(port); + + if (likely(port->fifosize > 12)) + rfr_level = port->fifosize - 12; + else + rfr_level = port->fifosize; + + /* set automatic RFR level */ + data = msm_read(port, UART_MR1); + data &= ~UART_MR1_AUTO_RFR_LEVEL1; + data &= ~UART_MR1_AUTO_RFR_LEVEL0; + data |= UART_MR1_AUTO_RFR_LEVEL1 & (rfr_level << 2); + data |= UART_MR1_AUTO_RFR_LEVEL0 & rfr_level; + msm_write(port, data, UART_MR1); + return 0; +} + +static void msm_shutdown(struct uart_port *port) +{ + struct msm_port *msm_port = UART_TO_MSM(port); + + msm_port->imr = 0; + msm_write(port, 0, UART_IMR); /* disable interrupts */ + + clk_disable_unprepare(msm_port->clk); + + free_irq(port->irq, port); +} + +static void msm_set_termios(struct uart_port *port, struct ktermios *termios, + struct ktermios *old) +{ + unsigned long flags; + unsigned int baud, mr; + + spin_lock_irqsave(&port->lock, flags); + + /* calculate and set baud rate */ + baud = uart_get_baud_rate(port, termios, old, 300, 115200); + baud = msm_set_baud_rate(port, baud); + if (tty_termios_baud_rate(termios)) + tty_termios_encode_baud_rate(termios, baud, baud); + + /* calculate parity */ + mr = msm_read(port, UART_MR2); + mr &= ~UART_MR2_PARITY_MODE; + if (termios->c_cflag & PARENB) { + if (termios->c_cflag & PARODD) + mr |= UART_MR2_PARITY_MODE_ODD; + else if (termios->c_cflag & CMSPAR) + mr |= UART_MR2_PARITY_MODE_SPACE; + else + mr |= UART_MR2_PARITY_MODE_EVEN; + } + + /* calculate bits per char */ + mr &= ~UART_MR2_BITS_PER_CHAR; + switch (termios->c_cflag & CSIZE) { + case CS5: + mr |= UART_MR2_BITS_PER_CHAR_5; + break; + case CS6: + mr |= UART_MR2_BITS_PER_CHAR_6; + break; + case CS7: + mr |= UART_MR2_BITS_PER_CHAR_7; + break; + case CS8: + default: + mr |= UART_MR2_BITS_PER_CHAR_8; + break; + } + + /* calculate stop bits */ + mr &= ~(UART_MR2_STOP_BIT_LEN_ONE | UART_MR2_STOP_BIT_LEN_TWO); + if (termios->c_cflag & CSTOPB) + mr |= UART_MR2_STOP_BIT_LEN_TWO; + else + mr |= UART_MR2_STOP_BIT_LEN_ONE; + + /* set parity, bits per char, and stop bit */ + msm_write(port, mr, UART_MR2); + + /* calculate and set hardware flow control */ + mr = msm_read(port, UART_MR1); + mr &= ~(UART_MR1_CTS_CTL | UART_MR1_RX_RDY_CTL); + if (termios->c_cflag & CRTSCTS) { + mr |= UART_MR1_CTS_CTL; + mr |= UART_MR1_RX_RDY_CTL; + } + msm_write(port, mr, UART_MR1); + + /* Configure status bits to ignore based on termio flags. */ + port->read_status_mask = 0; + if (termios->c_iflag & INPCK) + port->read_status_mask |= UART_SR_PAR_FRAME_ERR; + if (termios->c_iflag & (IGNBRK | BRKINT | PARMRK)) + port->read_status_mask |= UART_SR_RX_BREAK; + + uart_update_timeout(port, termios->c_cflag, baud); + + spin_unlock_irqrestore(&port->lock, flags); +} + +static const char *msm_type(struct uart_port *port) +{ + return "MSM"; +} + +static void msm_release_port(struct uart_port *port) +{ + struct platform_device *pdev = to_platform_device(port->dev); + struct resource *uart_resource; + resource_size_t size; + + uart_resource = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (unlikely(!uart_resource)) + return; + size = resource_size(uart_resource); + + release_mem_region(port->mapbase, size); + iounmap(port->membase); + port->membase = NULL; +} + +static int msm_request_port(struct uart_port *port) +{ + struct platform_device *pdev = to_platform_device(port->dev); + struct resource *uart_resource; + resource_size_t size; + int ret; + + uart_resource = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (unlikely(!uart_resource)) + return -ENXIO; + + size = resource_size(uart_resource); + + if (!request_mem_region(port->mapbase, size, "msm_serial")) + return -EBUSY; + + port->membase = ioremap(port->mapbase, size); + if (!port->membase) { + ret = -EBUSY; + goto fail_release_port; + } + + return 0; + +fail_release_port: + release_mem_region(port->mapbase, size); + return ret; +} + +static void msm_config_port(struct uart_port *port, int flags) +{ + int ret; + + if (flags & UART_CONFIG_TYPE) { + port->type = PORT_MSM; + ret = msm_request_port(port); + if (ret) + return; + } +} + +static int msm_verify_port(struct uart_port *port, struct serial_struct *ser) +{ + if (unlikely(ser->type != PORT_UNKNOWN && ser->type != PORT_MSM)) + return -EINVAL; + if (unlikely(port->irq != ser->irq)) + return -EINVAL; + return 0; +} + +static void msm_power(struct uart_port *port, unsigned int state, + unsigned int oldstate) +{ + struct msm_port *msm_port = UART_TO_MSM(port); + + switch (state) { + case 0: + clk_prepare_enable(msm_port->clk); + clk_prepare_enable(msm_port->pclk); + break; + case 3: + clk_disable_unprepare(msm_port->clk); + clk_disable_unprepare(msm_port->pclk); + break; + default: + pr_err("msm_serial: Unknown PM state %d\n", state); + } +} + +#ifdef CONFIG_CONSOLE_POLL +static int msm_poll_get_char_single(struct uart_port *port) +{ + struct msm_port *msm_port = UART_TO_MSM(port); + unsigned int rf_reg = msm_port->is_uartdm ? UARTDM_RF : UART_RF; + + if (!(msm_read(port, UART_SR) & UART_SR_RX_READY)) + return NO_POLL_CHAR; + + return msm_read(port, rf_reg) & 0xff; +} + +static int msm_poll_get_char_dm(struct uart_port *port) +{ + int c; + static u32 slop; + static int count; + unsigned char *sp = (unsigned char *)&slop; + + /* Check if a previous read had more than one char */ + if (count) { + c = sp[sizeof(slop) - count]; + count--; + /* Or if FIFO is empty */ + } else if (!(msm_read(port, UART_SR) & UART_SR_RX_READY)) { + /* + * If RX packing buffer has less than a word, force stale to + * push contents into RX FIFO + */ + count = msm_read(port, UARTDM_RXFS); + count = (count >> UARTDM_RXFS_BUF_SHIFT) & UARTDM_RXFS_BUF_MASK; + if (count) { + msm_write(port, UART_CR_CMD_FORCE_STALE, UART_CR); + slop = msm_read(port, UARTDM_RF); + c = sp[0]; + count--; + msm_write(port, UART_CR_CMD_RESET_STALE_INT, UART_CR); + msm_write(port, 0xFFFFFF, UARTDM_DMRX); + msm_write(port, UART_CR_CMD_STALE_EVENT_ENABLE, + UART_CR); + } else { + c = NO_POLL_CHAR; + } + /* FIFO has a word */ + } else { + slop = msm_read(port, UARTDM_RF); + c = sp[0]; + count = sizeof(slop) - 1; + } + + return c; +} + +static int msm_poll_get_char(struct uart_port *port) +{ + u32 imr; + int c; + struct msm_port *msm_port = UART_TO_MSM(port); + + /* Disable all interrupts */ + imr = msm_read(port, UART_IMR); + msm_write(port, 0, UART_IMR); + + if (msm_port->is_uartdm) + c = msm_poll_get_char_dm(port); + else + c = msm_poll_get_char_single(port); + + /* Enable interrupts */ + msm_write(port, imr, UART_IMR); + + return c; +} + +static void msm_poll_put_char(struct uart_port *port, unsigned char c) +{ + u32 imr; + struct msm_port *msm_port = UART_TO_MSM(port); + + /* Disable all interrupts */ + imr = msm_read(port, UART_IMR); + msm_write(port, 0, UART_IMR); + + if (msm_port->is_uartdm) + reset_dm_count(port, 1); + + /* Wait until FIFO is empty */ + while (!(msm_read(port, UART_SR) & UART_SR_TX_READY)) + cpu_relax(); + + /* Write a character */ + msm_write(port, c, msm_port->is_uartdm ? UARTDM_TF : UART_TF); + + /* Wait until FIFO is empty */ + while (!(msm_read(port, UART_SR) & UART_SR_TX_READY)) + cpu_relax(); + + /* Enable interrupts */ + msm_write(port, imr, UART_IMR); +} +#endif + +static struct uart_ops msm_uart_pops = { + .tx_empty = msm_tx_empty, + .set_mctrl = msm_set_mctrl, + .get_mctrl = msm_get_mctrl, + .stop_tx = msm_stop_tx, + .start_tx = msm_start_tx, + .stop_rx = msm_stop_rx, + .enable_ms = msm_enable_ms, + .break_ctl = msm_break_ctl, + .startup = msm_startup, + .shutdown = msm_shutdown, + .set_termios = msm_set_termios, + .type = msm_type, + .release_port = msm_release_port, + .request_port = msm_request_port, + .config_port = msm_config_port, + .verify_port = msm_verify_port, + .pm = msm_power, +#ifdef CONFIG_CONSOLE_POLL + .poll_get_char = msm_poll_get_char, + .poll_put_char = msm_poll_put_char, +#endif +}; + +static struct msm_port msm_uart_ports[] = { + { + .uart = { + .iotype = UPIO_MEM, + .ops = &msm_uart_pops, + .flags = UPF_BOOT_AUTOCONF, + .fifosize = 64, + .line = 0, + }, + }, + { + .uart = { + .iotype = UPIO_MEM, + .ops = &msm_uart_pops, + .flags = UPF_BOOT_AUTOCONF, + .fifosize = 64, + .line = 1, + }, + }, + { + .uart = { + .iotype = UPIO_MEM, + .ops = &msm_uart_pops, + .flags = UPF_BOOT_AUTOCONF, + .fifosize = 64, + .line = 2, + }, + }, +}; + +#define UART_NR ARRAY_SIZE(msm_uart_ports) + +static inline struct uart_port *get_port_from_line(unsigned int line) +{ + return &msm_uart_ports[line].uart; +} + +#ifdef CONFIG_SERIAL_MSM_CONSOLE +static void __msm_console_write(struct uart_port *port, const char *s, + unsigned int count, bool is_uartdm) +{ + int i; + int num_newlines = 0; + bool replaced = false; + void __iomem *tf; + + if (is_uartdm) + tf = port->membase + UARTDM_TF; + else + tf = port->membase + UART_TF; + + /* Account for newlines that will get a carriage return added */ + for (i = 0; i < count; i++) + if (s[i] == '\n') + num_newlines++; + count += num_newlines; + + spin_lock(&port->lock); + if (is_uartdm) + reset_dm_count(port, count); + + i = 0; + while (i < count) { + int j; + unsigned int num_chars; + char buf[4] = { 0 }; + + if (is_uartdm) + num_chars = min(count - i, (unsigned int)sizeof(buf)); + else + num_chars = 1; + + for (j = 0; j < num_chars; j++) { + char c = *s; + + if (c == '\n' && !replaced) { + buf[j] = '\r'; + j++; + replaced = true; + } + if (j < num_chars) { + buf[j] = c; + s++; + replaced = false; + } + } + + while (!(msm_read(port, UART_SR) & UART_SR_TX_READY)) + cpu_relax(); + + iowrite32_rep(tf, buf, 1); + i += num_chars; + } + spin_unlock(&port->lock); +} + +static void msm_console_write(struct console *co, const char *s, + unsigned int count) +{ + struct uart_port *port; + struct msm_port *msm_port; + + BUG_ON(co->index < 0 || co->index >= UART_NR); + + port = get_port_from_line(co->index); + msm_port = UART_TO_MSM(port); + + __msm_console_write(port, s, count, msm_port->is_uartdm); +} + +static int __init msm_console_setup(struct console *co, char *options) +{ + struct uart_port *port; + int baud = 115200; + int bits = 8; + int parity = 'n'; + int flow = 'n'; + + if (unlikely(co->index >= UART_NR || co->index < 0)) + return -ENXIO; + + port = get_port_from_line(co->index); + + if (unlikely(!port->membase)) + return -ENXIO; + + msm_init_clock(port); + + if (options) + uart_parse_options(options, &baud, &parity, &bits, &flow); + + pr_info("msm_serial: console setup on port #%d\n", port->line); + + return uart_set_options(port, co, baud, parity, bits, flow); +} + +static void +msm_serial_early_write(struct console *con, const char *s, unsigned n) +{ + struct earlycon_device *dev = con->data; + + __msm_console_write(&dev->port, s, n, false); +} + +static int __init +msm_serial_early_console_setup(struct earlycon_device *device, const char *opt) +{ + if (!device->port.membase) + return -ENODEV; + + device->con->write = msm_serial_early_write; + return 0; +} +EARLYCON_DECLARE(msm_serial, msm_serial_early_console_setup); +OF_EARLYCON_DECLARE(msm_serial, "qcom,msm-uart", + msm_serial_early_console_setup); + +static void +msm_serial_early_write_dm(struct console *con, const char *s, unsigned n) +{ + struct earlycon_device *dev = con->data; + + __msm_console_write(&dev->port, s, n, true); +} + +static int __init +msm_serial_early_console_setup_dm(struct earlycon_device *device, + const char *opt) +{ + if (!device->port.membase) + return -ENODEV; + + device->con->write = msm_serial_early_write_dm; + return 0; +} +EARLYCON_DECLARE(msm_serial_dm, msm_serial_early_console_setup_dm); +OF_EARLYCON_DECLARE(msm_serial_dm, "qcom,msm-uartdm", + msm_serial_early_console_setup_dm); + +static struct uart_driver msm_uart_driver; + +static struct console msm_console = { + .name = "ttyMSM", + .write = msm_console_write, + .device = uart_console_device, + .setup = msm_console_setup, + .flags = CON_PRINTBUFFER, + .index = -1, + .data = &msm_uart_driver, +}; + +#define MSM_CONSOLE (&msm_console) + +#else +#define MSM_CONSOLE NULL +#endif + +static struct uart_driver msm_uart_driver = { + .owner = THIS_MODULE, + .driver_name = "msm_serial", + .dev_name = "ttyMSM", + .nr = UART_NR, + .cons = MSM_CONSOLE, +}; + +static atomic_t msm_uart_next_id = ATOMIC_INIT(0); + +static const struct of_device_id msm_uartdm_table[] = { + { .compatible = "qcom,msm-uartdm-v1.1", .data = (void *)UARTDM_1P1 }, + { .compatible = "qcom,msm-uartdm-v1.2", .data = (void *)UARTDM_1P2 }, + { .compatible = "qcom,msm-uartdm-v1.3", .data = (void *)UARTDM_1P3 }, + { .compatible = "qcom,msm-uartdm-v1.4", .data = (void *)UARTDM_1P4 }, + { } +}; + +static int msm_serial_probe(struct platform_device *pdev) +{ + struct msm_port *msm_port; + struct resource *resource; + struct uart_port *port; + const struct of_device_id *id; + int irq, line; + + if (pdev->dev.of_node) + line = of_alias_get_id(pdev->dev.of_node, "serial"); + else + line = pdev->id; + + if (line < 0) + line = atomic_inc_return(&msm_uart_next_id) - 1; + + if (unlikely(line < 0 || line >= UART_NR)) + return -ENXIO; + + dev_info(&pdev->dev, "msm_serial: detected port #%d\n", line); + + port = get_port_from_line(line); + port->dev = &pdev->dev; + msm_port = UART_TO_MSM(port); + + id = of_match_device(msm_uartdm_table, &pdev->dev); + if (id) + msm_port->is_uartdm = (unsigned long)id->data; + else + msm_port->is_uartdm = 0; + + msm_port->clk = devm_clk_get(&pdev->dev, "core"); + if (IS_ERR(msm_port->clk)) + return PTR_ERR(msm_port->clk); + + if (msm_port->is_uartdm) { + msm_port->pclk = devm_clk_get(&pdev->dev, "iface"); + if (IS_ERR(msm_port->pclk)) + return PTR_ERR(msm_port->pclk); + + clk_set_rate(msm_port->clk, 1843200); + } + + port->uartclk = clk_get_rate(msm_port->clk); + dev_info(&pdev->dev, "uartclk = %d\n", port->uartclk); + + resource = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (unlikely(!resource)) + return -ENXIO; + port->mapbase = resource->start; + + irq = platform_get_irq(pdev, 0); + if (unlikely(irq < 0)) + return -ENXIO; + port->irq = irq; + + platform_set_drvdata(pdev, port); + + return uart_add_one_port(&msm_uart_driver, port); +} + +static int msm_serial_remove(struct platform_device *pdev) +{ + struct uart_port *port = platform_get_drvdata(pdev); + + uart_remove_one_port(&msm_uart_driver, port); + + return 0; +} + +static const struct of_device_id msm_match_table[] = { + { .compatible = "qcom,msm-uart" }, + { .compatible = "qcom,msm-uartdm" }, + {} +}; + +static struct platform_driver msm_platform_driver = { + .remove = msm_serial_remove, + .probe = msm_serial_probe, + .driver = { + .name = "msm_serial", + .of_match_table = msm_match_table, + }, +}; + +static int __init msm_serial_init(void) +{ + int ret; + + ret = uart_register_driver(&msm_uart_driver); + if (unlikely(ret)) + return ret; + + ret = platform_driver_register(&msm_platform_driver); + if (unlikely(ret)) + uart_unregister_driver(&msm_uart_driver); + + pr_info("msm_serial: driver initialized\n"); + + return ret; +} + +static void __exit msm_serial_exit(void) +{ + platform_driver_unregister(&msm_platform_driver); + uart_unregister_driver(&msm_uart_driver); +} + +module_init(msm_serial_init); +module_exit(msm_serial_exit); + +MODULE_AUTHOR("Robert Love <rlove@google.com>"); +MODULE_DESCRIPTION("Driver for msm7x serial device"); +MODULE_LICENSE("GPL"); |