diff options
Diffstat (limited to 'drivers/tty/serial')
38 files changed, 1085 insertions, 1256 deletions
diff --git a/drivers/tty/serial/68328serial.c b/drivers/tty/serial/68328serial.c index 0140ba4aa..0982c1a44 100644 --- a/drivers/tty/serial/68328serial.c +++ b/drivers/tty/serial/68328serial.c @@ -157,7 +157,7 @@ static void change_speed(struct m68k_serial *info, struct tty_struct *tty); #endif -static int m68328_console_initted = 0; +static int m68328_console_initted; static int m68328_console_baud = CONSOLE_BAUD_RATE; static int m68328_console_cbaud = DEFAULT_CBAUD; @@ -274,8 +274,8 @@ static void receive_chars(struct m68k_serial *info, unsigned short rx) #endif ch = GET_FIELD(rx, URX_RXDATA); - if(info->is_cons) { - if(URX_BREAK & rx) { /* whee, break received */ + if (info->is_cons) { + if (URX_BREAK & rx) { /* whee, break received */ return; #ifdef CONFIG_MAGIC_SYSRQ } else if (ch == 0x10) { /* ^P */ @@ -302,7 +302,7 @@ static void receive_chars(struct m68k_serial *info, unsigned short rx) tty_insert_flip_char(&info->tport, ch, flag); #ifndef CONFIG_XCOPILOT_BUGS - } while((rx = uart->urx.w) & URX_DATA_READY); + } while ((rx = uart->urx.w) & URX_DATA_READY); #endif tty_schedule_flip(&info->tport); @@ -330,7 +330,7 @@ static void transmit_chars(struct m68k_serial *info, struct tty_struct *tty) info->xmit_tail = info->xmit_tail & (SERIAL_XMIT_SIZE-1); info->xmit_cnt--; - if(info->xmit_cnt <= 0) { + if (info->xmit_cnt <= 0) { /* All done for now... TX ints off */ uart->ustcnt &= ~USTCNT_TX_INTR_MASK; goto clear_and_return; @@ -452,45 +452,45 @@ struct { } #ifndef CONFIG_M68VZ328 hw_baud_table[18] = { - {0,0}, /* 0 */ - {0,0}, /* 50 */ - {0,0}, /* 75 */ - {0,0}, /* 110 */ - {0,0}, /* 134 */ - {0,0}, /* 150 */ - {0,0}, /* 200 */ - {7,0x26}, /* 300 */ - {6,0x26}, /* 600 */ - {5,0x26}, /* 1200 */ - {0,0}, /* 1800 */ - {4,0x26}, /* 2400 */ - {3,0x26}, /* 4800 */ - {2,0x26}, /* 9600 */ - {1,0x26}, /* 19200 */ - {0,0x26}, /* 38400 */ - {1,0x38}, /* 57600 */ - {0,0x38}, /* 115200 */ + {0, 0}, /* 0 */ + {0, 0}, /* 50 */ + {0, 0}, /* 75 */ + {0, 0}, /* 110 */ + {0, 0}, /* 134 */ + {0, 0}, /* 150 */ + {0, 0}, /* 200 */ + {7, 0x26}, /* 300 */ + {6, 0x26}, /* 600 */ + {5, 0x26}, /* 1200 */ + {0, 0}, /* 1800 */ + {4, 0x26}, /* 2400 */ + {3, 0x26}, /* 4800 */ + {2, 0x26}, /* 9600 */ + {1, 0x26}, /* 19200 */ + {0, 0x26}, /* 38400 */ + {1, 0x38}, /* 57600 */ + {0, 0x38}, /* 115200 */ }; #else hw_baud_table[18] = { - {0,0}, /* 0 */ - {0,0}, /* 50 */ - {0,0}, /* 75 */ - {0,0}, /* 110 */ - {0,0}, /* 134 */ - {0,0}, /* 150 */ - {0,0}, /* 200 */ - {0,0}, /* 300 */ - {7,0x26}, /* 600 */ - {6,0x26}, /* 1200 */ - {0,0}, /* 1800 */ - {5,0x26}, /* 2400 */ - {4,0x26}, /* 4800 */ - {3,0x26}, /* 9600 */ - {2,0x26}, /* 19200 */ - {1,0x26}, /* 38400 */ - {0,0x26}, /* 57600 */ - {1,0x38}, /* 115200 */ + {0, 0}, /* 0 */ + {0, 0}, /* 50 */ + {0, 0}, /* 75 */ + {0, 0}, /* 110 */ + {0, 0}, /* 134 */ + {0, 0}, /* 150 */ + {0, 0}, /* 200 */ + {0, 0}, /* 300 */ + {7, 0x26}, /* 600 */ + {6, 0x26}, /* 1200 */ + {0, 0}, /* 1800 */ + {5, 0x26}, /* 2400 */ + {4, 0x26}, /* 4800 */ + {3, 0x26}, /* 9600 */ + {2, 0x26}, /* 19200 */ + {1, 0x26}, /* 38400 */ + {0, 0x26}, /* 57600 */ + {1, 0x38}, /* 115200 */ }; #endif /* rate = 1036800 / ((65 - prescale) * (1<<divider)) */ @@ -538,7 +538,7 @@ static void change_speed(struct m68k_serial *info, struct tty_struct *tty) #ifdef CONFIG_SERIAL_68328_RTS_CTS if (cflag & CRTSCTS) { - uart->utx.w &= ~ UTX_NOCTS; + uart->utx.w &= ~UTX_NOCTS; } else { uart->utx.w |= UTX_NOCTS; } @@ -591,8 +591,8 @@ void console_print_68328(const char *p) { char c; - while((c=*(p++)) != 0) { - if(c == '\n') + while ((c = *(p++)) != 0) { + if (c == '\n') rs_put_char('\r'); rs_put_char(c); } @@ -624,7 +624,7 @@ static void rs_flush_chars(struct tty_struct *tty) if (serial_paranoia_check(info, tty->name, "rs_flush_chars")) return; #ifndef USE_INTS - for(;;) { + for (;;) { #endif /* Enable transmitter */ @@ -659,9 +659,9 @@ static void rs_flush_chars(struct tty_struct *tty) local_irq_restore(flags); } -extern void console_printn(const char * b, int count); +extern void console_printn(const char *b, int count); -static int rs_write(struct tty_struct * tty, +static int rs_write(struct tty_struct *tty, const unsigned char *buf, int count) { int c, total = 0; @@ -700,7 +700,7 @@ static int rs_write(struct tty_struct * tty, /* Enable transmitter */ local_irq_disable(); #ifndef USE_INTS - while(info->xmit_cnt) { + while (info->xmit_cnt) { #endif uart->ustcnt |= USTCNT_TXEN; @@ -767,7 +767,7 @@ static void rs_flush_buffer(struct tty_struct *tty) * incoming characters should be throttled. * ------------------------------------------------------------ */ -static void rs_throttle(struct tty_struct * tty) +static void rs_throttle(struct tty_struct *tty) { struct m68k_serial *info = (struct m68k_serial *)tty->driver_data; @@ -780,7 +780,7 @@ static void rs_throttle(struct tty_struct * tty) /* Turn off RTS line (do this atomic) */ } -static void rs_unthrottle(struct tty_struct * tty) +static void rs_unthrottle(struct tty_struct *tty) { struct m68k_serial *info = (struct m68k_serial *)tty->driver_data; @@ -803,8 +803,8 @@ static void rs_unthrottle(struct tty_struct * tty) * ------------------------------------------------------------ */ -static int get_serial_info(struct m68k_serial * info, - struct serial_struct * retinfo) +static int get_serial_info(struct m68k_serial *info, + struct serial_struct *retinfo) { struct serial_struct tmp; @@ -827,7 +827,7 @@ static int get_serial_info(struct m68k_serial * info, } static int set_serial_info(struct m68k_serial *info, struct tty_struct *tty, - struct serial_struct * new_info) + struct serial_struct *new_info) { struct tty_port *port = &info->tport; struct serial_struct new_serial; @@ -883,7 +883,7 @@ check_and_exit: * transmit holding register is empty. This functionality * allows an RS485 driver to be written in user space. */ -static int get_lsr_info(struct m68k_serial * info, unsigned int *value) +static int get_lsr_info(struct m68k_serial *info, unsigned int *value) { #ifdef CONFIG_SERIAL_68328_RTS_CTS m68328_uart *uart = &uart_addr[info->line]; @@ -904,7 +904,7 @@ static int get_lsr_info(struct m68k_serial * info, unsigned int *value) /* * This routine sends a break character out the serial port. */ -static void send_break(struct m68k_serial * info, unsigned int duration) +static void send_break(struct m68k_serial *info, unsigned int duration) { m68328_uart *uart = &uart_addr[info->line]; unsigned long flags; @@ -922,7 +922,7 @@ static void send_break(struct m68k_serial * info, unsigned int duration) static int rs_ioctl(struct tty_struct *tty, unsigned int cmd, unsigned long arg) { - struct m68k_serial * info = (struct m68k_serial *)tty->driver_data; + struct m68k_serial *info = (struct m68k_serial *)tty->driver_data; int retval; if (serial_paranoia_check(info, tty->name, "rs_ioctl")) @@ -992,9 +992,9 @@ static void rs_set_termios(struct tty_struct *tty, struct ktermios *old_termios) * that IRQ if nothing is left in the chain. * ------------------------------------------------------------ */ -static void rs_close(struct tty_struct *tty, struct file * filp) +static void rs_close(struct tty_struct *tty, struct file *filp) { - struct m68k_serial * info = (struct m68k_serial *)tty->driver_data; + struct m68k_serial *info = (struct m68k_serial *)tty->driver_data; struct tty_port *port = &info->tport; m68328_uart *uart = &uart_addr[info->line]; unsigned long flags; @@ -1079,7 +1079,7 @@ static void rs_close(struct tty_struct *tty, struct file * filp) */ void rs_hangup(struct tty_struct *tty) { - struct m68k_serial * info = (struct m68k_serial *)tty->driver_data; + struct m68k_serial *info = (struct m68k_serial *)tty->driver_data; if (serial_paranoia_check(info, tty->name, "rs_hangup")) return; @@ -1098,7 +1098,7 @@ void rs_hangup(struct tty_struct *tty) * the IRQ chain. It also performs the serial-specific * initialization for the tty structure. */ -int rs_open(struct tty_struct *tty, struct file * filp) +int rs_open(struct tty_struct *tty, struct file *filp) { struct m68k_serial *info; int retval; @@ -1180,7 +1180,7 @@ rs68328_init(void) local_irq_save(flags); - for(i=0;i<NR_PORTS;i++) { + for (i = 0; i < NR_PORTS; i++) { info = &m68k_soft[i]; tty_port_init(&info->tport); @@ -1198,7 +1198,7 @@ rs68328_init(void) printk(" is a builtin MC68328 UART\n"); #ifdef CONFIG_M68VZ328 - if (i > 0 ) + if (i > 0) PJSEL &= 0xCF; /* PSW enable second port output */ #endif @@ -1263,7 +1263,7 @@ int m68328_console_setup(struct console *cp, char *arg) return(-1); if (arg) - n = simple_strtoul(arg,NULL,0); + n = simple_strtoul(arg, NULL, 0); for (i = 0; i < ARRAY_SIZE(baud_table); i++) if (baud_table[i] == n) @@ -1279,7 +1279,7 @@ int m68328_console_setup(struct console *cp, char *arg) } m68328_set_baud(); /* make sure baud rate changes */ - return(0); + return 0; } @@ -1298,7 +1298,7 @@ void m68328_console_write (struct console *co, const char *str, while (count--) { if (*str == '\n') rs_put_char('\r'); - rs_put_char( *str++ ); + rs_put_char(*str++); } } diff --git a/drivers/tty/serial/8250/8250_core.c b/drivers/tty/serial/8250/8250_core.c index 58dbff93a..279a842cd 100644 --- a/drivers/tty/serial/8250/8250_core.c +++ b/drivers/tty/serial/8250/8250_core.c @@ -620,7 +620,7 @@ static int univ8250_console_setup(struct console *co, char *options) * @options: ptr to option string from console command line * * Only attempts to match console command lines of the form: - * console=uart[8250],io|mmio|mmio32,<addr>[,<options>] + * console=uart[8250],io|mmio|mmio16|mmio32,<addr>[,<options>] * console=uart[8250],0x<addr>[,<options>] * This form is used to register an initial earlycon boot console and * replace it with the serial8250_console at 8250 driver init. @@ -650,8 +650,9 @@ static int univ8250_console_match(struct console *co, char *name, int idx, if (port->iotype != iotype) continue; - if ((iotype == UPIO_MEM || iotype == UPIO_MEM32) && - (port->mapbase != addr)) + if ((iotype == UPIO_MEM || iotype == UPIO_MEM16 || + iotype == UPIO_MEM32 || iotype == UPIO_MEM32BE) + && (port->mapbase != addr)) continue; if (iotype == UPIO_PORT && port->iobase != addr) continue; diff --git a/drivers/tty/serial/8250/8250_early.c b/drivers/tty/serial/8250/8250_early.c index e2919b4d1..2aa151366 100644 --- a/drivers/tty/serial/8250/8250_early.c +++ b/drivers/tty/serial/8250/8250_early.c @@ -42,6 +42,8 @@ static unsigned int __init serial8250_early_in(struct uart_port *port, int offse switch (port->iotype) { case UPIO_MEM: return readb(port->membase + offset); + case UPIO_MEM16: + return readw(port->membase + (offset << 1)); case UPIO_MEM32: return readl(port->membase + (offset << 2)); case UPIO_MEM32BE: @@ -59,6 +61,9 @@ static void __init serial8250_early_out(struct uart_port *port, int offset, int case UPIO_MEM: writeb(value, port->membase + offset); break; + case UPIO_MEM16: + writew(value, port->membase + (offset << 1)); + break; case UPIO_MEM32: writel(value, port->membase + (offset << 2)); break; @@ -73,43 +78,27 @@ static void __init serial8250_early_out(struct uart_port *port, int offset, int #define BOTH_EMPTY (UART_LSR_TEMT | UART_LSR_THRE) -static void __init wait_for_xmitr(struct uart_port *port) +static void __init serial_putc(struct uart_port *port, int c) { unsigned int status; + serial8250_early_out(port, UART_TX, c); + for (;;) { status = serial8250_early_in(port, UART_LSR); if ((status & BOTH_EMPTY) == BOTH_EMPTY) - return; + break; cpu_relax(); } } -static void __init serial_putc(struct uart_port *port, int c) -{ - wait_for_xmitr(port); - serial8250_early_out(port, UART_TX, c); -} - static void __init early_serial8250_write(struct console *console, const char *s, unsigned int count, unsigned int loglevel) { struct earlycon_device *device = console->data; struct uart_port *port = &device->port; - unsigned int ier; - - /* Save the IER and disable interrupts preserving the UUE bit */ - ier = serial8250_early_in(port, UART_IER); - if (ier) - serial8250_early_out(port, UART_IER, ier & UART_IER_UUE); uart_console_write(port, s, count, serial_putc); - - /* Wait for transmitter to become empty and restore the IER */ - wait_for_xmitr(port); - - if (ier) - serial8250_early_out(port, UART_IER, ier); } static void __init init_port(struct earlycon_device *device) diff --git a/drivers/tty/serial/8250/8250_ingenic.c b/drivers/tty/serial/8250/8250_ingenic.c index 49394b4c5..d6e1ec9b4 100644 --- a/drivers/tty/serial/8250/8250_ingenic.c +++ b/drivers/tty/serial/8250/8250_ingenic.c @@ -48,6 +48,7 @@ static const struct of_device_id of_match[]; #define UART_MCR_MDCE BIT(7) #define UART_MCR_FCM BIT(6) +#ifdef CONFIG_SERIAL_EARLYCON static struct earlycon_device *early_device; static uint8_t __init early_in(struct uart_port *port, int offset) @@ -140,6 +141,7 @@ OF_EARLYCON_DECLARE(jz4775_uart, "ingenic,jz4775-uart", EARLYCON_DECLARE(jz4780_uart, ingenic_early_console_setup); OF_EARLYCON_DECLARE(jz4780_uart, "ingenic,jz4780-uart", ingenic_early_console_setup); +#endif /* CONFIG_SERIAL_EARLYCON */ static void ingenic_uart_serial_out(struct uart_port *p, int offset, int value) { diff --git a/drivers/tty/serial/8250/8250_mtk.c b/drivers/tty/serial/8250/8250_mtk.c index 78883ca64..0e590b233 100644 --- a/drivers/tty/serial/8250/8250_mtk.c +++ b/drivers/tty/serial/8250/8250_mtk.c @@ -16,7 +16,7 @@ */ #include <linux/clk.h> #include <linux/io.h> -#include <linux/module.h> +#include <linux/init.h> #include <linux/of_irq.h> #include <linux/of_platform.h> #include <linux/platform_device.h> @@ -245,23 +245,6 @@ static int mtk8250_probe(struct platform_device *pdev) return 0; } -static int mtk8250_remove(struct platform_device *pdev) -{ - struct mtk8250_data *data = platform_get_drvdata(pdev); - - pm_runtime_get_sync(&pdev->dev); - - serial8250_unregister_port(data->line); - - pm_runtime_disable(&pdev->dev); - pm_runtime_put_noidle(&pdev->dev); - - if (!pm_runtime_status_suspended(&pdev->dev)) - mtk8250_runtime_suspend(&pdev->dev); - - return 0; -} - #ifdef CONFIG_PM_SLEEP static int mtk8250_suspend(struct device *dev) { @@ -292,18 +275,18 @@ static const struct of_device_id mtk8250_of_match[] = { { .compatible = "mediatek,mt6577-uart" }, { /* Sentinel */ } }; -MODULE_DEVICE_TABLE(of, mtk8250_of_match); static struct platform_driver mtk8250_platform_driver = { .driver = { - .name = "mt6577-uart", - .pm = &mtk8250_pm_ops, - .of_match_table = mtk8250_of_match, + .name = "mt6577-uart", + .pm = &mtk8250_pm_ops, + .of_match_table = mtk8250_of_match, + .suppress_bind_attrs = true, + }, .probe = mtk8250_probe, - .remove = mtk8250_remove, }; -module_platform_driver(mtk8250_platform_driver); +builtin_platform_driver(mtk8250_platform_driver); #ifdef CONFIG_SERIAL_8250_CONSOLE static int __init early_mtk8250_setup(struct earlycon_device *device, @@ -319,7 +302,3 @@ static int __init early_mtk8250_setup(struct earlycon_device *device, OF_EARLYCON_DECLARE(mtk8250, "mediatek,mt6577-uart", early_mtk8250_setup); #endif - -MODULE_AUTHOR("Matthias Brugger"); -MODULE_LICENSE("GPL"); -MODULE_DESCRIPTION("Mediatek 8250 serial port driver"); diff --git a/drivers/tty/serial/of_serial.c b/drivers/tty/serial/8250/8250_of.c index de5029649..33021c1f7 100644 --- a/drivers/tty/serial/of_serial.c +++ b/drivers/tty/serial/8250/8250_of.c @@ -18,14 +18,9 @@ #include <linux/of_address.h> #include <linux/of_irq.h> #include <linux/of_platform.h> -#include <linux/nwpserial.h> #include <linux/clk.h> -#ifdef CONFIG_SERIAL_8250_MODULE -#define CONFIG_SERIAL_8250 CONFIG_SERIAL_8250_MODULE -#endif - -#include "8250/8250.h" +#include "8250.h" struct of_serial_info { struct clk *clk; @@ -122,6 +117,9 @@ static int of_platform_serial_setup(struct platform_device *ofdev, case 1: port->iotype = UPIO_MEM; break; + case 2: + port->iotype = UPIO_MEM16; + break; case 4: port->iotype = of_device_is_big_endian(np) ? UPIO_MEM32BE : UPIO_MEM32; @@ -195,7 +193,6 @@ static int of_platform_serial_probe(struct platform_device *ofdev) goto out; switch (port_type) { -#ifdef CONFIG_SERIAL_8250 case PORT_8250 ... PORT_MAX_8250: { struct uart_8250_port port8250; @@ -212,12 +209,6 @@ static int of_platform_serial_probe(struct platform_device *ofdev) ret = serial8250_register_8250_port(&port8250); break; } -#endif -#ifdef CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL - case PORT_NWPSERIAL: - ret = nwpserial_register_port(&port); - break; -#endif default: /* need to add code for these */ case PORT_UNKNOWN: @@ -245,16 +236,9 @@ static int of_platform_serial_remove(struct platform_device *ofdev) { struct of_serial_info *info = platform_get_drvdata(ofdev); switch (info->type) { -#ifdef CONFIG_SERIAL_8250 case PORT_8250 ... PORT_MAX_8250: serial8250_unregister_port(info->line); break; -#endif -#ifdef CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL - case PORT_NWPSERIAL: - nwpserial_unregister_port(info->line); - break; -#endif default: /* need to add code for these */ break; @@ -267,7 +251,6 @@ static int of_platform_serial_remove(struct platform_device *ofdev) } #ifdef CONFIG_PM_SLEEP -#ifdef CONFIG_SERIAL_8250 static void of_serial_suspend_8250(struct of_serial_info *info) { struct uart_8250_port *port8250 = serial8250_get_port(info->line); @@ -288,15 +271,6 @@ static void of_serial_resume_8250(struct of_serial_info *info) serial8250_resume_port(info->line); } -#else -static inline void of_serial_suspend_8250(struct of_serial_info *info) -{ -} - -static inline void of_serial_resume_8250(struct of_serial_info *info) -{ -} -#endif static int of_serial_suspend(struct device *dev) { @@ -353,10 +327,6 @@ static const struct of_device_id of_platform_serial_table[] = { .data = (void *)PORT_XSCALE, }, { .compatible = "mrvl,pxa-uart", .data = (void *)PORT_XSCALE, }, -#ifdef CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL - { .compatible = "ibm,qpace-nwp-serial", - .data = (void *)PORT_NWPSERIAL, }, -#endif { /* end of list */ }, }; MODULE_DEVICE_TABLE(of, of_platform_serial_table); diff --git a/drivers/tty/serial/8250/8250_port.c b/drivers/tty/serial/8250/8250_port.c index 5a85bbaa2..83aed6193 100644 --- a/drivers/tty/serial/8250/8250_port.c +++ b/drivers/tty/serial/8250/8250_port.c @@ -368,6 +368,18 @@ static void mem_serial_out(struct uart_port *p, int offset, int value) writeb(value, p->membase + offset); } +static void mem16_serial_out(struct uart_port *p, int offset, int value) +{ + offset = offset << p->regshift; + writew(value, p->membase + offset); +} + +static unsigned int mem16_serial_in(struct uart_port *p, int offset) +{ + offset = offset << p->regshift; + return readw(p->membase + offset); +} + static void mem32_serial_out(struct uart_port *p, int offset, int value) { offset = offset << p->regshift; @@ -425,6 +437,11 @@ static void set_io_from_upio(struct uart_port *p) p->serial_out = mem_serial_out; break; + case UPIO_MEM16: + p->serial_in = mem16_serial_in; + p->serial_out = mem16_serial_out; + break; + case UPIO_MEM32: p->serial_in = mem32_serial_in; p->serial_out = mem32_serial_out; @@ -459,6 +476,7 @@ serial_port_out_sync(struct uart_port *p, int offset, int value) { switch (p->iotype) { case UPIO_MEM: + case UPIO_MEM16: case UPIO_MEM32: case UPIO_MEM32BE: case UPIO_AU: @@ -2462,6 +2480,7 @@ static int serial8250_request_std_resource(struct uart_8250_port *up) case UPIO_TSI: case UPIO_MEM32: case UPIO_MEM32BE: + case UPIO_MEM16: case UPIO_MEM: if (!port->mapbase) break; @@ -2499,6 +2518,7 @@ static void serial8250_release_std_resource(struct uart_8250_port *up) case UPIO_TSI: case UPIO_MEM32: case UPIO_MEM32BE: + case UPIO_MEM16: case UPIO_MEM: if (!port->mapbase) break; diff --git a/drivers/tty/serial/8250/8250_uniphier.c b/drivers/tty/serial/8250/8250_uniphier.c index 245edbb68..bab6b3ae2 100644 --- a/drivers/tty/serial/8250/8250_uniphier.c +++ b/drivers/tty/serial/8250/8250_uniphier.c @@ -13,6 +13,7 @@ */ #include <linux/clk.h> +#include <linux/console.h> #include <linux/io.h> #include <linux/module.h> #include <linux/of.h> @@ -34,6 +35,29 @@ struct uniphier8250_priv { spinlock_t atomic_write_lock; }; +#ifdef CONFIG_SERIAL_8250_CONSOLE +static int __init uniphier_early_console_setup(struct earlycon_device *device, + const char *options) +{ + if (!device->port.membase) + return -ENODEV; + + /* This hardware always expects MMIO32 register interface. */ + device->port.iotype = UPIO_MEM32; + device->port.regshift = 2; + + /* + * Do not touch the divisor register in early_serial8250_setup(); + * we assume it has been initialized by a boot loader. + */ + device->baud = 0; + + return early_serial8250_setup(device, options); +} +OF_EARLYCON_DECLARE(uniphier, "socionext,uniphier-uart", + uniphier_early_console_setup); +#endif + /* * The register map is slightly different from that of 8250. * IO callbacks must be overridden for correct access to FCR, LCR, and MCR. diff --git a/drivers/tty/serial/8250/Kconfig b/drivers/tty/serial/8250/Kconfig index 6412f1455..b03cb5175 100644 --- a/drivers/tty/serial/8250/Kconfig +++ b/drivers/tty/serial/8250/Kconfig @@ -361,9 +361,8 @@ config SERIAL_8250_UNIPHIER config SERIAL_8250_INGENIC bool "Support for Ingenic SoC serial ports" - depends on SERIAL_8250_CONSOLE && OF_FLATTREE + depends on OF_FLATTREE select LIBFDT - select SERIAL_EARLYCON help If you have a system using an Ingenic SoC and wish to make use of its UARTs, say Y to this option. If unsure, say N. @@ -372,9 +371,18 @@ config SERIAL_8250_MID tristate "Support for serial ports on Intel MID platforms" depends on SERIAL_8250 && PCI select HSU_DMA if SERIAL_8250_DMA - select HSU_DMA_PCI if X86_INTEL_MID + select HSU_DMA_PCI if (HSU_DMA && X86_INTEL_MID) select RATIONAL help Selecting this option will enable handling of the extra features present on the UART found on Intel Medfield SOC and various other Intel platforms. + +config SERIAL_OF_PLATFORM + tristate "Devicetree based probing for 8250 ports" + depends on SERIAL_8250 && OF + help + This option is used for all 8250 compatible serial ports that + are probed through devicetree, including Open Firmware based + PowerPC systems and embedded systems on architectures using the + flattened device tree format. diff --git a/drivers/tty/serial/8250/Makefile b/drivers/tty/serial/8250/Makefile index e177f8681..b9b9bca5b 100644 --- a/drivers/tty/serial/8250/Makefile +++ b/drivers/tty/serial/8250/Makefile @@ -28,5 +28,6 @@ obj-$(CONFIG_SERIAL_8250_MT6577) += 8250_mtk.o obj-$(CONFIG_SERIAL_8250_UNIPHIER) += 8250_uniphier.o obj-$(CONFIG_SERIAL_8250_INGENIC) += 8250_ingenic.o obj-$(CONFIG_SERIAL_8250_MID) += 8250_mid.o +obj-$(CONFIG_SERIAL_OF_PLATFORM) += 8250_of.o CFLAGS_8250_ingenic.o += -I$(srctree)/scripts/dtc/libfdt diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig index f38beb28e..39721ec4f 100644 --- a/drivers/tty/serial/Kconfig +++ b/drivers/tty/serial/Kconfig @@ -115,6 +115,7 @@ config SERIAL_SB1250_DUART_CONSOLE config SERIAL_ATMEL bool "AT91 / AT32 on-chip serial port support" + depends on HAS_DMA depends on ARCH_AT91 || AVR32 || COMPILE_TEST select SERIAL_CORE select SERIAL_MCTRL_GPIO if GPIOLIB @@ -571,9 +572,11 @@ config BFIN_UART3_CTSRTS config SERIAL_IMX tristate "IMX serial port support" + depends on HAS_DMA depends on ARCH_MXC || COMPILE_TEST select SERIAL_CORE select RATIONAL + select SERIAL_MCTRL_GPIO if GPIOLIB help If you have a machine based on a Motorola IMX CPU you can enable its onboard serial port by enabling this option. @@ -1044,7 +1047,7 @@ config SERIAL_SGI_IOC3 say Y or M. Otherwise, say N. config SERIAL_MSM - bool "MSM on-chip serial port support" + tristate "MSM on-chip serial port support" depends on ARCH_QCOM select SERIAL_CORE @@ -1094,16 +1097,6 @@ config SERIAL_NETX_CONSOLE If you have enabled the serial port on the Hilscher NetX SoC you can make it the console by answering Y to this option. -config SERIAL_OF_PLATFORM - tristate "Serial port on Open Firmware platform bus" - depends on OF - depends on SERIAL_8250 || SERIAL_OF_PLATFORM_NWPSERIAL - help - If you have a PowerPC based system that has serial ports - on a platform specific bus, you should enable this option. - Currently, only 8250 compatible ports are supported, but - others can easily be added. - config SERIAL_OMAP tristate "OMAP serial port support" depends on ARCH_OMAP2PLUS @@ -1131,23 +1124,6 @@ config SERIAL_OMAP_CONSOLE your boot loader about how to pass options to the kernel at boot time.) -config SERIAL_OF_PLATFORM_NWPSERIAL - tristate "NWP serial port driver" - depends on PPC_DCR - select SERIAL_OF_PLATFORM - select SERIAL_CORE_CONSOLE - select SERIAL_CORE - help - This driver supports the cell network processor nwp serial - device. - -config SERIAL_OF_PLATFORM_NWPSERIAL_CONSOLE - bool "Console on NWP serial port" - depends on SERIAL_OF_PLATFORM_NWPSERIAL=y - select SERIAL_CORE_CONSOLE - help - Support for Console on the NWP serial ports. - config SERIAL_LANTIQ bool "Lantiq serial driver" depends on LANTIQ @@ -1409,8 +1385,9 @@ config SERIAL_PCH_UART_CONSOLE warnings and which allows logins in single user mode). config SERIAL_MXS_AUART - depends on ARCH_MXS || COMPILE_TEST tristate "MXS AUART support" + depends on HAS_DMA + depends on ARCH_MXS || COMPILE_TEST select SERIAL_CORE select SERIAL_MCTRL_GPIO if GPIOLIB help diff --git a/drivers/tty/serial/Makefile b/drivers/tty/serial/Makefile index 5ab41119b..b391c9b31 100644 --- a/drivers/tty/serial/Makefile +++ b/drivers/tty/serial/Makefile @@ -63,8 +63,6 @@ obj-$(CONFIG_SERIAL_ATMEL) += atmel_serial.o obj-$(CONFIG_SERIAL_UARTLITE) += uartlite.o obj-$(CONFIG_SERIAL_MSM) += msm_serial.o obj-$(CONFIG_SERIAL_NETX) += netx-serial.o -obj-$(CONFIG_SERIAL_OF_PLATFORM) += of_serial.o -obj-$(CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL) += nwpserial.o obj-$(CONFIG_SERIAL_KGDB_NMI) += kgdb_nmi.o obj-$(CONFIG_SERIAL_KS8695) += serial_ks8695.o obj-$(CONFIG_SERIAL_OMAP) += omap-serial.o diff --git a/drivers/tty/serial/amba-pl011.c b/drivers/tty/serial/amba-pl011.c index 899a77187..c0da0ccbb 100644 --- a/drivers/tty/serial/amba-pl011.c +++ b/drivers/tty/serial/amba-pl011.c @@ -60,6 +60,8 @@ #include <linux/io.h> #include <linux/acpi.h> +#include "amba-pl011.h" + #define UART_NR 14 #define SERIAL_AMBA_MAJOR 204 @@ -71,11 +73,27 @@ #define UART_DR_ERROR (UART011_DR_OE|UART011_DR_BE|UART011_DR_PE|UART011_DR_FE) #define UART_DUMMY_DR_RX (1 << 16) +static u16 pl011_std_offsets[REG_ARRAY_SIZE] = { + [REG_DR] = UART01x_DR, + [REG_FR] = UART01x_FR, + [REG_LCRH_RX] = UART011_LCRH, + [REG_LCRH_TX] = UART011_LCRH, + [REG_IBRD] = UART011_IBRD, + [REG_FBRD] = UART011_FBRD, + [REG_CR] = UART011_CR, + [REG_IFLS] = UART011_IFLS, + [REG_IMSC] = UART011_IMSC, + [REG_RIS] = UART011_RIS, + [REG_MIS] = UART011_MIS, + [REG_ICR] = UART011_ICR, + [REG_DMACR] = UART011_DMACR, +}; + /* There is by now at least one vendor with differing details, so handle it */ struct vendor_data { + const u16 *reg_offset; unsigned int ifls; - unsigned int lcrh_tx; - unsigned int lcrh_rx; + bool access_32b; bool oversampling; bool dma_threshold; bool cts_event_workaround; @@ -91,9 +109,8 @@ static unsigned int get_fifosize_arm(struct amba_device *dev) } static struct vendor_data vendor_arm = { + .reg_offset = pl011_std_offsets, .ifls = UART011_IFLS_RX4_8|UART011_IFLS_TX4_8, - .lcrh_tx = UART011_LCRH, - .lcrh_rx = UART011_LCRH, .oversampling = false, .dma_threshold = false, .cts_event_workaround = false, @@ -103,6 +120,7 @@ static struct vendor_data vendor_arm = { }; static struct vendor_data vendor_sbsa = { + .reg_offset = pl011_std_offsets, .oversampling = false, .dma_threshold = false, .cts_event_workaround = false, @@ -110,15 +128,41 @@ static struct vendor_data vendor_sbsa = { .fixed_options = true, }; +static u16 pl011_st_offsets[REG_ARRAY_SIZE] = { + [REG_DR] = UART01x_DR, + [REG_ST_DMAWM] = ST_UART011_DMAWM, + [REG_ST_TIMEOUT] = ST_UART011_TIMEOUT, + [REG_FR] = UART01x_FR, + [REG_LCRH_RX] = ST_UART011_LCRH_RX, + [REG_LCRH_TX] = ST_UART011_LCRH_TX, + [REG_IBRD] = UART011_IBRD, + [REG_FBRD] = UART011_FBRD, + [REG_CR] = UART011_CR, + [REG_IFLS] = UART011_IFLS, + [REG_IMSC] = UART011_IMSC, + [REG_RIS] = UART011_RIS, + [REG_MIS] = UART011_MIS, + [REG_ICR] = UART011_ICR, + [REG_DMACR] = UART011_DMACR, + [REG_ST_XFCR] = ST_UART011_XFCR, + [REG_ST_XON1] = ST_UART011_XON1, + [REG_ST_XON2] = ST_UART011_XON2, + [REG_ST_XOFF1] = ST_UART011_XOFF1, + [REG_ST_XOFF2] = ST_UART011_XOFF2, + [REG_ST_ITCR] = ST_UART011_ITCR, + [REG_ST_ITIP] = ST_UART011_ITIP, + [REG_ST_ABCR] = ST_UART011_ABCR, + [REG_ST_ABIMSC] = ST_UART011_ABIMSC, +}; + static unsigned int get_fifosize_st(struct amba_device *dev) { return 64; } static struct vendor_data vendor_st = { + .reg_offset = pl011_st_offsets, .ifls = UART011_IFLS_RX_HALF|UART011_IFLS_TX_HALF, - .lcrh_tx = ST_UART011_LCRH_TX, - .lcrh_rx = ST_UART011_LCRH_RX, .oversampling = true, .dma_threshold = true, .cts_event_workaround = true, @@ -127,6 +171,29 @@ static struct vendor_data vendor_st = { .get_fifosize = get_fifosize_st, }; +static const u16 pl011_zte_offsets[REG_ARRAY_SIZE] = { + [REG_DR] = ZX_UART011_DR, + [REG_FR] = ZX_UART011_FR, + [REG_LCRH_RX] = ZX_UART011_LCRH, + [REG_LCRH_TX] = ZX_UART011_LCRH, + [REG_IBRD] = ZX_UART011_IBRD, + [REG_FBRD] = ZX_UART011_FBRD, + [REG_CR] = ZX_UART011_CR, + [REG_IFLS] = ZX_UART011_IFLS, + [REG_IMSC] = ZX_UART011_IMSC, + [REG_RIS] = ZX_UART011_RIS, + [REG_MIS] = ZX_UART011_MIS, + [REG_ICR] = ZX_UART011_ICR, + [REG_DMACR] = ZX_UART011_DMACR, +}; + +static struct vendor_data vendor_zte = { + .reg_offset = pl011_zte_offsets, + .access_32b = true, + .ifls = UART011_IFLS_RX4_8|UART011_IFLS_TX4_8, + .get_fifosize = get_fifosize_arm, +}; + /* Deals with DMA transactions */ struct pl011_sgbuf { @@ -162,14 +229,13 @@ struct pl011_dmatx_data { */ struct uart_amba_port { struct uart_port port; + const u16 *reg_offset; struct clk *clk; const struct vendor_data *vendor; unsigned int dmacr; /* dma control reg */ unsigned int im; /* interrupt mask */ unsigned int old_status; unsigned int fifosize; /* vendor-specific */ - unsigned int lcrh_tx; /* vendor-specific */ - unsigned int lcrh_rx; /* vendor-specific */ unsigned int old_cr; /* state during shutdown */ bool autorts; unsigned int fixed_baud; /* vendor-set fixed baud rate */ @@ -184,6 +250,32 @@ struct uart_amba_port { #endif }; +static unsigned int pl011_reg_to_offset(const struct uart_amba_port *uap, + unsigned int reg) +{ + return uap->reg_offset[reg]; +} + +static unsigned int pl011_read(const struct uart_amba_port *uap, + unsigned int reg) +{ + void __iomem *addr = uap->port.membase + pl011_reg_to_offset(uap, reg); + + return (uap->port.iotype == UPIO_MEM32) ? + readl_relaxed(addr) : readw_relaxed(addr); +} + +static void pl011_write(unsigned int val, const struct uart_amba_port *uap, + unsigned int reg) +{ + void __iomem *addr = uap->port.membase + pl011_reg_to_offset(uap, reg); + + if (uap->port.iotype == UPIO_MEM32) + writel_relaxed(val, addr); + else + writew_relaxed(val, addr); +} + /* * Reads up to 256 characters from the FIFO or until it's empty and * inserts them into the TTY layer. Returns the number of characters @@ -196,13 +288,12 @@ static int pl011_fifo_to_tty(struct uart_amba_port *uap) int fifotaken = 0; while (max_count--) { - status = readw(uap->port.membase + UART01x_FR); + status = pl011_read(uap, REG_FR); if (status & UART01x_FR_RXFE) break; /* Take chars from the FIFO and update status */ - ch = readw(uap->port.membase + UART01x_DR) | - UART_DUMMY_DR_RX; + ch = pl011_read(uap, REG_DR) | UART_DUMMY_DR_RX; flag = TTY_NORMAL; uap->port.icount.rx++; fifotaken++; @@ -284,7 +375,8 @@ static void pl011_dma_probe(struct uart_amba_port *uap) struct amba_pl011_data *plat = dev_get_platdata(uap->port.dev); struct device *dev = uap->port.dev; struct dma_slave_config tx_conf = { - .dst_addr = uap->port.mapbase + UART01x_DR, + .dst_addr = uap->port.mapbase + + pl011_reg_to_offset(uap, REG_DR), .dst_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE, .direction = DMA_MEM_TO_DEV, .dst_maxburst = uap->fifosize >> 1, @@ -339,7 +431,8 @@ static void pl011_dma_probe(struct uart_amba_port *uap) if (chan) { struct dma_slave_config rx_conf = { - .src_addr = uap->port.mapbase + UART01x_DR, + .src_addr = uap->port.mapbase + + pl011_reg_to_offset(uap, REG_DR), .src_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE, .direction = DMA_DEV_TO_MEM, .src_maxburst = uap->fifosize >> 2, @@ -438,7 +531,7 @@ static void pl011_dma_tx_callback(void *data) dmacr = uap->dmacr; uap->dmacr = dmacr & ~UART011_TXDMAE; - writew(uap->dmacr, uap->port.membase + UART011_DMACR); + pl011_write(uap->dmacr, uap, REG_DMACR); /* * If TX DMA was disabled, it means that we've stopped the DMA for @@ -552,7 +645,7 @@ static int pl011_dma_tx_refill(struct uart_amba_port *uap) dma_dev->device_issue_pending(chan); uap->dmacr |= UART011_TXDMAE; - writew(uap->dmacr, uap->port.membase + UART011_DMACR); + pl011_write(uap->dmacr, uap, REG_DMACR); uap->dmatx.queued = true; /* @@ -588,9 +681,9 @@ static bool pl011_dma_tx_irq(struct uart_amba_port *uap) */ if (uap->dmatx.queued) { uap->dmacr |= UART011_TXDMAE; - writew(uap->dmacr, uap->port.membase + UART011_DMACR); + pl011_write(uap->dmacr, uap, REG_DMACR); uap->im &= ~UART011_TXIM; - writew(uap->im, uap->port.membase + UART011_IMSC); + pl011_write(uap->im, uap, REG_IMSC); return true; } @@ -600,7 +693,7 @@ static bool pl011_dma_tx_irq(struct uart_amba_port *uap) */ if (pl011_dma_tx_refill(uap) > 0) { uap->im &= ~UART011_TXIM; - writew(uap->im, uap->port.membase + UART011_IMSC); + pl011_write(uap->im, uap, REG_IMSC); return true; } return false; @@ -614,7 +707,7 @@ static inline void pl011_dma_tx_stop(struct uart_amba_port *uap) { if (uap->dmatx.queued) { uap->dmacr &= ~UART011_TXDMAE; - writew(uap->dmacr, uap->port.membase + UART011_DMACR); + pl011_write(uap->dmacr, uap, REG_DMACR); } } @@ -640,14 +733,12 @@ static inline bool pl011_dma_tx_start(struct uart_amba_port *uap) if (!uap->dmatx.queued) { if (pl011_dma_tx_refill(uap) > 0) { uap->im &= ~UART011_TXIM; - writew(uap->im, uap->port.membase + - UART011_IMSC); + pl011_write(uap->im, uap, REG_IMSC); } else ret = false; } else if (!(uap->dmacr & UART011_TXDMAE)) { uap->dmacr |= UART011_TXDMAE; - writew(uap->dmacr, - uap->port.membase + UART011_DMACR); + pl011_write(uap->dmacr, uap, REG_DMACR); } return ret; } @@ -658,9 +749,9 @@ static inline bool pl011_dma_tx_start(struct uart_amba_port *uap) */ dmacr = uap->dmacr; uap->dmacr &= ~UART011_TXDMAE; - writew(uap->dmacr, uap->port.membase + UART011_DMACR); + pl011_write(uap->dmacr, uap, REG_DMACR); - if (readw(uap->port.membase + UART01x_FR) & UART01x_FR_TXFF) { + if (pl011_read(uap, REG_FR) & UART01x_FR_TXFF) { /* * No space in the FIFO, so enable the transmit interrupt * so we know when there is space. Note that once we've @@ -669,13 +760,13 @@ static inline bool pl011_dma_tx_start(struct uart_amba_port *uap) return false; } - writew(uap->port.x_char, uap->port.membase + UART01x_DR); + pl011_write(uap->port.x_char, uap, REG_DR); uap->port.icount.tx++; uap->port.x_char = 0; /* Success - restore the DMA state */ uap->dmacr = dmacr; - writew(dmacr, uap->port.membase + UART011_DMACR); + pl011_write(dmacr, uap, REG_DMACR); return true; } @@ -703,7 +794,7 @@ __acquires(&uap->port.lock) DMA_TO_DEVICE); uap->dmatx.queued = false; uap->dmacr &= ~UART011_TXDMAE; - writew(uap->dmacr, uap->port.membase + UART011_DMACR); + pl011_write(uap->dmacr, uap, REG_DMACR); } } @@ -743,11 +834,11 @@ static int pl011_dma_rx_trigger_dma(struct uart_amba_port *uap) dma_async_issue_pending(rxchan); uap->dmacr |= UART011_RXDMAE; - writew(uap->dmacr, uap->port.membase + UART011_DMACR); + pl011_write(uap->dmacr, uap, REG_DMACR); uap->dmarx.running = true; uap->im &= ~UART011_RXIM; - writew(uap->im, uap->port.membase + UART011_IMSC); + pl011_write(uap->im, uap, REG_IMSC); return 0; } @@ -805,8 +896,8 @@ static void pl011_dma_rx_chars(struct uart_amba_port *uap, */ if (dma_count == pending && readfifo) { /* Clear any error flags */ - writew(UART011_OEIS | UART011_BEIS | UART011_PEIS | UART011_FEIS, - uap->port.membase + UART011_ICR); + pl011_write(UART011_OEIS | UART011_BEIS | UART011_PEIS | + UART011_FEIS, uap, REG_ICR); /* * If we read all the DMA'd characters, and we had an @@ -854,7 +945,7 @@ static void pl011_dma_rx_irq(struct uart_amba_port *uap) /* Disable RX DMA - incoming data will wait in the FIFO */ uap->dmacr &= ~UART011_RXDMAE; - writew(uap->dmacr, uap->port.membase + UART011_DMACR); + pl011_write(uap->dmacr, uap, REG_DMACR); uap->dmarx.running = false; pending = sgbuf->sg.length - state.residue; @@ -874,7 +965,7 @@ static void pl011_dma_rx_irq(struct uart_amba_port *uap) dev_dbg(uap->port.dev, "could not retrigger RX DMA job " "fall back to interrupt mode\n"); uap->im |= UART011_RXIM; - writew(uap->im, uap->port.membase + UART011_IMSC); + pl011_write(uap->im, uap, REG_IMSC); } } @@ -922,7 +1013,7 @@ static void pl011_dma_rx_callback(void *data) dev_dbg(uap->port.dev, "could not retrigger RX DMA job " "fall back to interrupt mode\n"); uap->im |= UART011_RXIM; - writew(uap->im, uap->port.membase + UART011_IMSC); + pl011_write(uap->im, uap, REG_IMSC); } } @@ -935,7 +1026,7 @@ static inline void pl011_dma_rx_stop(struct uart_amba_port *uap) { /* FIXME. Just disable the DMA enable */ uap->dmacr &= ~UART011_RXDMAE; - writew(uap->dmacr, uap->port.membase + UART011_DMACR); + pl011_write(uap->dmacr, uap, REG_DMACR); } /* @@ -979,7 +1070,7 @@ static void pl011_dma_rx_poll(unsigned long args) spin_lock_irqsave(&uap->port.lock, flags); pl011_dma_rx_stop(uap); uap->im |= UART011_RXIM; - writew(uap->im, uap->port.membase + UART011_IMSC); + pl011_write(uap->im, uap, REG_IMSC); spin_unlock_irqrestore(&uap->port.lock, flags); uap->dmarx.running = false; @@ -1041,7 +1132,7 @@ static void pl011_dma_startup(struct uart_amba_port *uap) skip_rx: /* Turn on DMA error (RX/TX will be enabled on demand) */ uap->dmacr |= UART011_DMAONERR; - writew(uap->dmacr, uap->port.membase + UART011_DMACR); + pl011_write(uap->dmacr, uap, REG_DMACR); /* * ST Micro variants has some specific dma burst threshold @@ -1049,8 +1140,8 @@ skip_rx: * be issued above/below 16 bytes. */ if (uap->vendor->dma_threshold) - writew(ST_UART011_DMAWM_RX_16 | ST_UART011_DMAWM_TX_16, - uap->port.membase + ST_UART011_DMAWM); + pl011_write(ST_UART011_DMAWM_RX_16 | ST_UART011_DMAWM_TX_16, + uap, REG_ST_DMAWM); if (uap->using_rx_dma) { if (pl011_dma_rx_trigger_dma(uap)) @@ -1075,12 +1166,12 @@ static void pl011_dma_shutdown(struct uart_amba_port *uap) return; /* Disable RX and TX DMA */ - while (readw(uap->port.membase + UART01x_FR) & UART01x_FR_BUSY) + while (pl011_read(uap, REG_FR) & UART01x_FR_BUSY) barrier(); spin_lock_irq(&uap->port.lock); uap->dmacr &= ~(UART011_DMAONERR | UART011_RXDMAE | UART011_TXDMAE); - writew(uap->dmacr, uap->port.membase + UART011_DMACR); + pl011_write(uap->dmacr, uap, REG_DMACR); spin_unlock_irq(&uap->port.lock); if (uap->using_tx_dma) { @@ -1181,7 +1272,7 @@ static void pl011_stop_tx(struct uart_port *port) container_of(port, struct uart_amba_port, port); uap->im &= ~UART011_TXIM; - writew(uap->im, uap->port.membase + UART011_IMSC); + pl011_write(uap->im, uap, REG_IMSC); pl011_dma_tx_stop(uap); } @@ -1191,7 +1282,7 @@ static void pl011_tx_chars(struct uart_amba_port *uap, bool from_irq); static void pl011_start_tx_pio(struct uart_amba_port *uap) { uap->im |= UART011_TXIM; - writew(uap->im, uap->port.membase + UART011_IMSC); + pl011_write(uap->im, uap, REG_IMSC); pl011_tx_chars(uap, false); } @@ -1211,7 +1302,7 @@ static void pl011_stop_rx(struct uart_port *port) uap->im &= ~(UART011_RXIM|UART011_RTIM|UART011_FEIM| UART011_PEIM|UART011_BEIM|UART011_OEIM); - writew(uap->im, uap->port.membase + UART011_IMSC); + pl011_write(uap->im, uap, REG_IMSC); pl011_dma_rx_stop(uap); } @@ -1222,7 +1313,7 @@ static void pl011_enable_ms(struct uart_port *port) container_of(port, struct uart_amba_port, port); uap->im |= UART011_RIMIM|UART011_CTSMIM|UART011_DCDMIM|UART011_DSRMIM; - writew(uap->im, uap->port.membase + UART011_IMSC); + pl011_write(uap->im, uap, REG_IMSC); } static void pl011_rx_chars(struct uart_amba_port *uap) @@ -1242,7 +1333,7 @@ __acquires(&uap->port.lock) dev_dbg(uap->port.dev, "could not trigger RX DMA job " "fall back to interrupt mode again\n"); uap->im |= UART011_RXIM; - writew(uap->im, uap->port.membase + UART011_IMSC); + pl011_write(uap->im, uap, REG_IMSC); } else { #ifdef CONFIG_DMA_ENGINE /* Start Rx DMA poll */ @@ -1263,10 +1354,10 @@ static bool pl011_tx_char(struct uart_amba_port *uap, unsigned char c, bool from_irq) { if (unlikely(!from_irq) && - readw(uap->port.membase + UART01x_FR) & UART01x_FR_TXFF) + pl011_read(uap, REG_FR) & UART01x_FR_TXFF) return false; /* unable to transmit character */ - writew(c, uap->port.membase + UART01x_DR); + pl011_write(c, uap, REG_DR); uap->port.icount.tx++; return true; @@ -1313,7 +1404,7 @@ static void pl011_modem_status(struct uart_amba_port *uap) { unsigned int status, delta; - status = readw(uap->port.membase + UART01x_FR) & UART01x_FR_MODEM_ANY; + status = pl011_read(uap, REG_FR) & UART01x_FR_MODEM_ANY; delta = status ^ uap->old_status; uap->old_status = status; @@ -1341,15 +1432,15 @@ static void check_apply_cts_event_workaround(struct uart_amba_port *uap) return; /* workaround to make sure that all bits are unlocked.. */ - writew(0x00, uap->port.membase + UART011_ICR); + pl011_write(0x00, uap, REG_ICR); /* * WA: introduce 26ns(1 uart clk) delay before W1C; * single apb access will incur 2 pclk(133.12Mhz) delay, * so add 2 dummy reads */ - dummy_read = readw(uap->port.membase + UART011_ICR); - dummy_read = readw(uap->port.membase + UART011_ICR); + dummy_read = pl011_read(uap, REG_ICR); + dummy_read = pl011_read(uap, REG_ICR); } static irqreturn_t pl011_int(int irq, void *dev_id) @@ -1361,15 +1452,15 @@ static irqreturn_t pl011_int(int irq, void *dev_id) int handled = 0; spin_lock_irqsave(&uap->port.lock, flags); - imsc = readw(uap->port.membase + UART011_IMSC); - status = readw(uap->port.membase + UART011_RIS) & imsc; + imsc = pl011_read(uap, REG_IMSC); + status = pl011_read(uap, REG_RIS) & imsc; if (status) { do { check_apply_cts_event_workaround(uap); - writew(status & ~(UART011_TXIS|UART011_RTIS| - UART011_RXIS), - uap->port.membase + UART011_ICR); + pl011_write(status & ~(UART011_TXIS|UART011_RTIS| + UART011_RXIS), + uap, REG_ICR); if (status & (UART011_RTIS|UART011_RXIS)) { if (pl011_dma_rx_running(uap)) @@ -1386,7 +1477,7 @@ static irqreturn_t pl011_int(int irq, void *dev_id) if (pass_counter-- == 0) break; - status = readw(uap->port.membase + UART011_RIS) & imsc; + status = pl011_read(uap, REG_RIS) & imsc; } while (status != 0); handled = 1; } @@ -1400,7 +1491,7 @@ static unsigned int pl011_tx_empty(struct uart_port *port) { struct uart_amba_port *uap = container_of(port, struct uart_amba_port, port); - unsigned int status = readw(uap->port.membase + UART01x_FR); + unsigned int status = pl011_read(uap, REG_FR); return status & (UART01x_FR_BUSY|UART01x_FR_TXFF) ? 0 : TIOCSER_TEMT; } @@ -1409,7 +1500,7 @@ static unsigned int pl011_get_mctrl(struct uart_port *port) struct uart_amba_port *uap = container_of(port, struct uart_amba_port, port); unsigned int result = 0; - unsigned int status = readw(uap->port.membase + UART01x_FR); + unsigned int status = pl011_read(uap, REG_FR); #define TIOCMBIT(uartbit, tiocmbit) \ if (status & uartbit) \ @@ -1429,7 +1520,7 @@ static void pl011_set_mctrl(struct uart_port *port, unsigned int mctrl) container_of(port, struct uart_amba_port, port); unsigned int cr; - cr = readw(uap->port.membase + UART011_CR); + cr = pl011_read(uap, REG_CR); #define TIOCMBIT(tiocmbit, uartbit) \ if (mctrl & tiocmbit) \ @@ -1449,7 +1540,7 @@ static void pl011_set_mctrl(struct uart_port *port, unsigned int mctrl) } #undef TIOCMBIT - writew(cr, uap->port.membase + UART011_CR); + pl011_write(cr, uap, REG_CR); } static void pl011_break_ctl(struct uart_port *port, int break_state) @@ -1460,12 +1551,12 @@ static void pl011_break_ctl(struct uart_port *port, int break_state) unsigned int lcr_h; spin_lock_irqsave(&uap->port.lock, flags); - lcr_h = readw(uap->port.membase + uap->lcrh_tx); + lcr_h = pl011_read(uap, REG_LCRH_TX); if (break_state == -1) lcr_h |= UART01x_LCRH_BRK; else lcr_h &= ~UART01x_LCRH_BRK; - writew(lcr_h, uap->port.membase + uap->lcrh_tx); + pl011_write(lcr_h, uap, REG_LCRH_TX); spin_unlock_irqrestore(&uap->port.lock, flags); } @@ -1475,9 +1566,8 @@ static void pl011_quiesce_irqs(struct uart_port *port) { struct uart_amba_port *uap = container_of(port, struct uart_amba_port, port); - unsigned char __iomem *regs = uap->port.membase; - writew(readw(regs + UART011_MIS), regs + UART011_ICR); + pl011_write(pl011_read(uap, REG_MIS), uap, REG_ICR); /* * There is no way to clear TXIM as this is "ready to transmit IRQ", so * we simply mask it. start_tx() will unmask it. @@ -1491,7 +1581,8 @@ static void pl011_quiesce_irqs(struct uart_port *port) * (including tx queue), so we're also fine with start_tx()'s caller * side. */ - writew(readw(regs + UART011_IMSC) & ~UART011_TXIM, regs + UART011_IMSC); + pl011_write(pl011_read(uap, REG_IMSC) & ~UART011_TXIM, uap, + REG_IMSC); } static int pl011_get_poll_char(struct uart_port *port) @@ -1506,11 +1597,11 @@ static int pl011_get_poll_char(struct uart_port *port) */ pl011_quiesce_irqs(port); - status = readw(uap->port.membase + UART01x_FR); + status = pl011_read(uap, REG_FR); if (status & UART01x_FR_RXFE) return NO_POLL_CHAR; - return readw(uap->port.membase + UART01x_DR); + return pl011_read(uap, REG_DR); } static void pl011_put_poll_char(struct uart_port *port, @@ -1519,10 +1610,10 @@ static void pl011_put_poll_char(struct uart_port *port, struct uart_amba_port *uap = container_of(port, struct uart_amba_port, port); - while (readw(uap->port.membase + UART01x_FR) & UART01x_FR_TXFF) + while (pl011_read(uap, REG_FR) & UART01x_FR_TXFF) barrier(); - writew(ch, uap->port.membase + UART01x_DR); + pl011_write(ch, uap, REG_DR); } #endif /* CONFIG_CONSOLE_POLL */ @@ -1546,15 +1637,16 @@ static int pl011_hwinit(struct uart_port *port) uap->port.uartclk = clk_get_rate(uap->clk); /* Clear pending error and receive interrupts */ - writew(UART011_OEIS | UART011_BEIS | UART011_PEIS | UART011_FEIS | - UART011_RTIS | UART011_RXIS, uap->port.membase + UART011_ICR); + pl011_write(UART011_OEIS | UART011_BEIS | UART011_PEIS | + UART011_FEIS | UART011_RTIS | UART011_RXIS, + uap, REG_ICR); /* * Save interrupts enable mask, and enable RX interrupts in case if * the interrupt is used for NMI entry. */ - uap->im = readw(uap->port.membase + UART011_IMSC); - writew(UART011_RTIM | UART011_RXIM, uap->port.membase + UART011_IMSC); + uap->im = pl011_read(uap, REG_IMSC); + pl011_write(UART011_RTIM | UART011_RXIM, uap, REG_IMSC); if (dev_get_platdata(uap->port.dev)) { struct amba_pl011_data *plat; @@ -1566,24 +1658,30 @@ static int pl011_hwinit(struct uart_port *port) return 0; } +static bool pl011_split_lcrh(const struct uart_amba_port *uap) +{ + return pl011_reg_to_offset(uap, REG_LCRH_RX) != + pl011_reg_to_offset(uap, REG_LCRH_TX); +} + static void pl011_write_lcr_h(struct uart_amba_port *uap, unsigned int lcr_h) { - writew(lcr_h, uap->port.membase + uap->lcrh_rx); - if (uap->lcrh_rx != uap->lcrh_tx) { + pl011_write(lcr_h, uap, REG_LCRH_RX); + if (pl011_split_lcrh(uap)) { int i; /* * Wait 10 PCLKs before writing LCRH_TX register, * to get this delay write read only register 10 times */ for (i = 0; i < 10; ++i) - writew(0xff, uap->port.membase + UART011_MIS); - writew(lcr_h, uap->port.membase + uap->lcrh_tx); + pl011_write(0xff, uap, REG_MIS); + pl011_write(lcr_h, uap, REG_LCRH_TX); } } static int pl011_allocate_irq(struct uart_amba_port *uap) { - writew(uap->im, uap->port.membase + UART011_IMSC); + pl011_write(uap->im, uap, REG_IMSC); return request_irq(uap->port.irq, pl011_int, 0, "uart-pl011", uap); } @@ -1598,12 +1696,11 @@ static void pl011_enable_interrupts(struct uart_amba_port *uap) spin_lock_irq(&uap->port.lock); /* Clear out any spuriously appearing RX interrupts */ - writew(UART011_RTIS | UART011_RXIS, - uap->port.membase + UART011_ICR); + pl011_write(UART011_RTIS | UART011_RXIS, uap, REG_ICR); uap->im = UART011_RTIM; if (!pl011_dma_rx_running(uap)) uap->im |= UART011_RXIM; - writew(uap->im, uap->port.membase + UART011_IMSC); + pl011_write(uap->im, uap, REG_IMSC); spin_unlock_irq(&uap->port.lock); } @@ -1622,21 +1719,21 @@ static int pl011_startup(struct uart_port *port) if (retval) goto clk_dis; - writew(uap->vendor->ifls, uap->port.membase + UART011_IFLS); + pl011_write(uap->vendor->ifls, uap, REG_IFLS); spin_lock_irq(&uap->port.lock); /* restore RTS and DTR */ cr = uap->old_cr & (UART011_CR_RTS | UART011_CR_DTR); cr |= UART01x_CR_UARTEN | UART011_CR_RXE | UART011_CR_TXE; - writew(cr, uap->port.membase + UART011_CR); + pl011_write(cr, uap, REG_CR); spin_unlock_irq(&uap->port.lock); /* * initialise the old status of the modem signals */ - uap->old_status = readw(uap->port.membase + UART01x_FR) & UART01x_FR_MODEM_ANY; + uap->old_status = pl011_read(uap, REG_FR) & UART01x_FR_MODEM_ANY; /* Startup DMA */ pl011_dma_startup(uap); @@ -1677,9 +1774,9 @@ static void pl011_shutdown_channel(struct uart_amba_port *uap, { unsigned long val; - val = readw(uap->port.membase + lcrh); + val = pl011_read(uap, lcrh); val &= ~(UART01x_LCRH_BRK | UART01x_LCRH_FEN); - writew(val, uap->port.membase + lcrh); + pl011_write(val, uap, lcrh); } /* @@ -1693,19 +1790,19 @@ static void pl011_disable_uart(struct uart_amba_port *uap) uap->autorts = false; spin_lock_irq(&uap->port.lock); - cr = readw(uap->port.membase + UART011_CR); + cr = pl011_read(uap, REG_CR); uap->old_cr = cr; cr &= UART011_CR_RTS | UART011_CR_DTR; cr |= UART01x_CR_UARTEN | UART011_CR_TXE; - writew(cr, uap->port.membase + UART011_CR); + pl011_write(cr, uap, REG_CR); spin_unlock_irq(&uap->port.lock); /* * disable break condition and fifos */ - pl011_shutdown_channel(uap, uap->lcrh_rx); - if (uap->lcrh_rx != uap->lcrh_tx) - pl011_shutdown_channel(uap, uap->lcrh_tx); + pl011_shutdown_channel(uap, REG_LCRH_RX); + if (pl011_split_lcrh(uap)) + pl011_shutdown_channel(uap, REG_LCRH_TX); } static void pl011_disable_interrupts(struct uart_amba_port *uap) @@ -1714,8 +1811,8 @@ static void pl011_disable_interrupts(struct uart_amba_port *uap) /* mask all interrupts and clear all pending ones */ uap->im = 0; - writew(uap->im, uap->port.membase + UART011_IMSC); - writew(0xffff, uap->port.membase + UART011_ICR); + pl011_write(uap->im, uap, REG_IMSC); + pl011_write(0xffff, uap, REG_ICR); spin_unlock_irq(&uap->port.lock); } @@ -1867,8 +1964,8 @@ pl011_set_termios(struct uart_port *port, struct ktermios *termios, pl011_enable_ms(port); /* first, disable everything */ - old_cr = readw(port->membase + UART011_CR); - writew(0, port->membase + UART011_CR); + old_cr = pl011_read(uap, REG_CR); + pl011_write(0, uap, REG_CR); if (termios->c_cflag & CRTSCTS) { if (old_cr & UART011_CR_RTS) @@ -1901,17 +1998,17 @@ pl011_set_termios(struct uart_port *port, struct ktermios *termios, quot -= 2; } /* Set baud rate */ - writew(quot & 0x3f, port->membase + UART011_FBRD); - writew(quot >> 6, port->membase + UART011_IBRD); + pl011_write(quot & 0x3f, uap, REG_FBRD); + pl011_write(quot >> 6, uap, REG_IBRD); /* * ----------v----------v----------v----------v----- - * NOTE: lcrh_tx and lcrh_rx MUST BE WRITTEN AFTER - * UART011_FBRD & UART011_IBRD. + * NOTE: REG_LCRH_TX and REG_LCRH_RX MUST BE WRITTEN AFTER + * REG_FBRD & REG_IBRD. * ----------^----------^----------^----------^----- */ pl011_write_lcr_h(uap, lcr_h); - writew(old_cr, port->membase + UART011_CR); + pl011_write(old_cr, uap, REG_CR); spin_unlock_irqrestore(&port->lock, flags); } @@ -2052,9 +2149,9 @@ static void pl011_console_putchar(struct uart_port *port, int ch) struct uart_amba_port *uap = container_of(port, struct uart_amba_port, port); - while (readw(uap->port.membase + UART01x_FR) & UART01x_FR_TXFF) + while (pl011_read(uap, REG_FR) & UART01x_FR_TXFF) barrier(); - writew(ch, uap->port.membase + UART01x_DR); + pl011_write(ch, uap, REG_DR); } static void @@ -2079,10 +2176,10 @@ pl011_console_write(struct console *co, const char *s, unsigned int count) * First save the CR then disable the interrupts */ if (!uap->vendor->always_enabled) { - old_cr = readw(uap->port.membase + UART011_CR); + old_cr = pl011_read(uap, REG_CR); new_cr = old_cr & ~UART011_CR_CTSEN; new_cr |= UART01x_CR_UARTEN | UART011_CR_TXE; - writew(new_cr, uap->port.membase + UART011_CR); + pl011_write(new_cr, uap, REG_CR); } uart_console_write(&uap->port, s, count, pl011_console_putchar); @@ -2092,10 +2189,10 @@ pl011_console_write(struct console *co, const char *s, unsigned int count) * and restore the TCR */ do { - status = readw(uap->port.membase + UART01x_FR); + status = pl011_read(uap, REG_FR); } while (status & UART01x_FR_BUSY); if (!uap->vendor->always_enabled) - writew(old_cr, uap->port.membase + UART011_CR); + pl011_write(old_cr, uap, REG_CR); if (locked) spin_unlock(&uap->port.lock); @@ -2108,10 +2205,10 @@ static void __init pl011_console_get_options(struct uart_amba_port *uap, int *baud, int *parity, int *bits) { - if (readw(uap->port.membase + UART011_CR) & UART01x_CR_UARTEN) { + if (pl011_read(uap, REG_CR) & UART01x_CR_UARTEN) { unsigned int lcr_h, ibrd, fbrd; - lcr_h = readw(uap->port.membase + uap->lcrh_tx); + lcr_h = pl011_read(uap, REG_LCRH_TX); *parity = 'n'; if (lcr_h & UART01x_LCRH_PEN) { @@ -2126,13 +2223,13 @@ pl011_console_get_options(struct uart_amba_port *uap, int *baud, else *bits = 8; - ibrd = readw(uap->port.membase + UART011_IBRD); - fbrd = readw(uap->port.membase + UART011_FBRD); + ibrd = pl011_read(uap, REG_IBRD); + fbrd = pl011_read(uap, REG_FBRD); *baud = uap->port.uartclk * 4 / (64 * ibrd + fbrd); if (uap->vendor->oversampling) { - if (readw(uap->port.membase + UART011_CR) + if (pl011_read(uap, REG_CR) & ST_UART011_CR_OVSFACT) *baud *= 2; } @@ -2206,7 +2303,10 @@ static void pl011_putc(struct uart_port *port, int c) { while (readl(port->membase + UART01x_FR) & UART01x_FR_TXFF) ; - writeb(c, port->membase + UART01x_DR); + if (port->iotype == UPIO_MEM32) + writel(c, port->membase + UART01x_DR); + else + writeb(c, port->membase + UART01x_DR); while (readl(port->membase + UART01x_FR) & UART01x_FR_BUSY) ; } @@ -2319,7 +2419,6 @@ static int pl011_setup_port(struct device *dev, struct uart_amba_port *uap, uap->port.dev = dev; uap->port.mapbase = mmiobase->start; uap->port.membase = base; - uap->port.iotype = UPIO_MEM; uap->port.fifosize = uap->fifosize; uap->port.flags = UPF_BOOT_AUTOCONF; uap->port.line = index; @@ -2334,8 +2433,8 @@ static int pl011_register_port(struct uart_amba_port *uap) int ret; /* Ensure interrupts from this UART are masked and cleared */ - writew(0, uap->port.membase + UART011_IMSC); - writew(0xffff, uap->port.membase + UART011_ICR); + pl011_write(0, uap, REG_IMSC); + pl011_write(0xffff, uap, REG_ICR); if (!amba_reg.state) { ret = uart_register_driver(&amba_reg); @@ -2372,10 +2471,10 @@ static int pl011_probe(struct amba_device *dev, const struct amba_id *id) if (IS_ERR(uap->clk)) return PTR_ERR(uap->clk); + uap->reg_offset = vendor->reg_offset; uap->vendor = vendor; - uap->lcrh_rx = vendor->lcrh_rx; - uap->lcrh_tx = vendor->lcrh_tx; uap->fifosize = vendor->get_fifosize(dev); + uap->port.iotype = vendor->access_32b ? UPIO_MEM32 : UPIO_MEM; uap->port.irq = dev->irq[0]; uap->port.ops = &amba_pl011_pops; @@ -2453,8 +2552,10 @@ static int sbsa_uart_probe(struct platform_device *pdev) if (!uap) return -ENOMEM; + uap->reg_offset = vendor_sbsa.reg_offset; uap->vendor = &vendor_sbsa; uap->fifosize = 32; + uap->port.iotype = vendor_sbsa.access_32b ? UPIO_MEM32 : UPIO_MEM; uap->port.irq = platform_get_irq(pdev, 0); uap->port.ops = &sbsa_uart_pops; uap->fixed_baud = baudrate; diff --git a/drivers/tty/serial/amba-pl011.h b/drivers/tty/serial/amba-pl011.h new file mode 100644 index 000000000..411c60e1f --- /dev/null +++ b/drivers/tty/serial/amba-pl011.h @@ -0,0 +1,34 @@ +#ifndef AMBA_PL011_H +#define AMBA_PL011_H + +enum { + REG_DR, + REG_ST_DMAWM, + REG_ST_TIMEOUT, + REG_FR, + REG_LCRH_RX, + REG_LCRH_TX, + REG_IBRD, + REG_FBRD, + REG_CR, + REG_IFLS, + REG_IMSC, + REG_RIS, + REG_MIS, + REG_ICR, + REG_DMACR, + REG_ST_XFCR, + REG_ST_XON1, + REG_ST_XON2, + REG_ST_XOFF1, + REG_ST_XOFF2, + REG_ST_ITCR, + REG_ST_ITIP, + REG_ST_ABCR, + REG_ST_ABIMSC, + + /* The size of the array - must be last */ + REG_ARRAY_SIZE, +}; + +#endif diff --git a/drivers/tty/serial/atmel_serial.c b/drivers/tty/serial/atmel_serial.c index 942945589..1c0884d8e 100644 --- a/drivers/tty/serial/atmel_serial.c +++ b/drivers/tty/serial/atmel_serial.c @@ -22,7 +22,6 @@ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA * */ -#include <linux/module.h> #include <linux/tty.h> #include <linux/ioport.h> #include <linux/slab.h> @@ -155,7 +154,6 @@ struct atmel_uart_port { struct circ_buf rx_ring; struct mctrl_gpios *gpios; - int gpio_irq[UART_GPIO_MAX]; unsigned int tx_done_mask; u32 fifo_size; u32 rts_high; @@ -190,8 +188,6 @@ static const struct of_device_id atmel_serial_dt_ids[] = { { .compatible = "atmel,at91sam9260-usart" }, { /* sentinel */ } }; - -MODULE_DEVICE_TABLE(of, atmel_serial_dt_ids); #endif static inline struct atmel_uart_port * @@ -550,27 +546,21 @@ static void atmel_enable_ms(struct uart_port *port) atmel_port->ms_irq_enabled = true; - if (atmel_port->gpio_irq[UART_GPIO_CTS] >= 0) - enable_irq(atmel_port->gpio_irq[UART_GPIO_CTS]); - else + if (!mctrl_gpio_to_gpiod(atmel_port->gpios, UART_GPIO_CTS)) ier |= ATMEL_US_CTSIC; - if (atmel_port->gpio_irq[UART_GPIO_DSR] >= 0) - enable_irq(atmel_port->gpio_irq[UART_GPIO_DSR]); - else + if (!mctrl_gpio_to_gpiod(atmel_port->gpios, UART_GPIO_DSR)) ier |= ATMEL_US_DSRIC; - if (atmel_port->gpio_irq[UART_GPIO_RI] >= 0) - enable_irq(atmel_port->gpio_irq[UART_GPIO_RI]); - else + if (!mctrl_gpio_to_gpiod(atmel_port->gpios, UART_GPIO_RI)) ier |= ATMEL_US_RIIC; - if (atmel_port->gpio_irq[UART_GPIO_DCD] >= 0) - enable_irq(atmel_port->gpio_irq[UART_GPIO_DCD]); - else + if (!mctrl_gpio_to_gpiod(atmel_port->gpios, UART_GPIO_DCD)) ier |= ATMEL_US_DCDIC; atmel_uart_writel(port, ATMEL_US_IER, ier); + + mctrl_gpio_enable_ms(atmel_port->gpios); } /* @@ -589,24 +579,18 @@ static void atmel_disable_ms(struct uart_port *port) atmel_port->ms_irq_enabled = false; - if (atmel_port->gpio_irq[UART_GPIO_CTS] >= 0) - disable_irq(atmel_port->gpio_irq[UART_GPIO_CTS]); - else + mctrl_gpio_disable_ms(atmel_port->gpios); + + if (!mctrl_gpio_to_gpiod(atmel_port->gpios, UART_GPIO_CTS)) idr |= ATMEL_US_CTSIC; - if (atmel_port->gpio_irq[UART_GPIO_DSR] >= 0) - disable_irq(atmel_port->gpio_irq[UART_GPIO_DSR]); - else + if (!mctrl_gpio_to_gpiod(atmel_port->gpios, UART_GPIO_DSR)) idr |= ATMEL_US_DSRIC; - if (atmel_port->gpio_irq[UART_GPIO_RI] >= 0) - disable_irq(atmel_port->gpio_irq[UART_GPIO_RI]); - else + if (!mctrl_gpio_to_gpiod(atmel_port->gpios, UART_GPIO_RI)) idr |= ATMEL_US_RIIC; - if (atmel_port->gpio_irq[UART_GPIO_DCD] >= 0) - disable_irq(atmel_port->gpio_irq[UART_GPIO_DCD]); - else + if (!mctrl_gpio_to_gpiod(atmel_port->gpios, UART_GPIO_DCD)) idr |= ATMEL_US_DCDIC; atmel_uart_writel(port, ATMEL_US_IDR, idr); @@ -1264,7 +1248,6 @@ static irqreturn_t atmel_interrupt(int irq, void *dev_id) struct uart_port *port = dev_id; struct atmel_uart_port *atmel_port = to_atmel_uart_port(port); unsigned int status, pending, mask, pass_counter = 0; - bool gpio_handled = false; spin_lock(&atmel_port->lock_suspended); @@ -1272,24 +1255,6 @@ static irqreturn_t atmel_interrupt(int irq, void *dev_id) status = atmel_get_lines_status(port); mask = atmel_uart_readl(port, ATMEL_US_IMR); pending = status & mask; - if (!gpio_handled) { - /* - * Dealing with GPIO interrupt - */ - if (irq == atmel_port->gpio_irq[UART_GPIO_CTS]) - pending |= ATMEL_US_CTSIC; - - if (irq == atmel_port->gpio_irq[UART_GPIO_DSR]) - pending |= ATMEL_US_DSRIC; - - if (irq == atmel_port->gpio_irq[UART_GPIO_RI]) - pending |= ATMEL_US_RIIC; - - if (irq == atmel_port->gpio_irq[UART_GPIO_DCD]) - pending |= ATMEL_US_DCDIC; - - gpio_handled = true; - } if (!pending) break; @@ -1778,45 +1743,6 @@ static void atmel_get_ip_name(struct uart_port *port) } } -static void atmel_free_gpio_irq(struct uart_port *port) -{ - struct atmel_uart_port *atmel_port = to_atmel_uart_port(port); - enum mctrl_gpio_idx i; - - for (i = 0; i < UART_GPIO_MAX; i++) - if (atmel_port->gpio_irq[i] >= 0) - free_irq(atmel_port->gpio_irq[i], port); -} - -static int atmel_request_gpio_irq(struct uart_port *port) -{ - struct atmel_uart_port *atmel_port = to_atmel_uart_port(port); - int *irq = atmel_port->gpio_irq; - enum mctrl_gpio_idx i; - int err = 0; - - for (i = 0; (i < UART_GPIO_MAX) && !err; i++) { - if (irq[i] < 0) - continue; - - irq_set_status_flags(irq[i], IRQ_NOAUTOEN); - err = request_irq(irq[i], atmel_interrupt, IRQ_TYPE_EDGE_BOTH, - "atmel_serial", port); - if (err) - dev_err(port->dev, "atmel_startup - Can't get %d irq\n", - irq[i]); - } - - /* - * If something went wrong, rollback. - */ - while (err && (--i >= 0)) - if (irq[i] >= 0) - free_irq(irq[i], port); - - return err; -} - /* * Perform initialization and enable port for reception */ @@ -1846,13 +1772,6 @@ static int atmel_startup(struct uart_port *port) return retval; } - /* - * Get the GPIO lines IRQ - */ - retval = atmel_request_gpio_irq(port); - if (retval) - goto free_irq; - tasklet_enable(&atmel_port->tasklet); /* @@ -1948,11 +1867,6 @@ static int atmel_startup(struct uart_port *port) } return 0; - -free_irq: - free_irq(port->irq, port); - - return retval; } /* @@ -2018,7 +1932,6 @@ static void atmel_shutdown(struct uart_port *port) * Free the interrupts */ free_irq(port->irq, port); - atmel_free_gpio_irq(port); atmel_port->ms_irq_enabled = false; @@ -2686,26 +2599,6 @@ static int atmel_serial_resume(struct platform_device *pdev) #define atmel_serial_resume NULL #endif -static int atmel_init_gpios(struct atmel_uart_port *p, struct device *dev) -{ - enum mctrl_gpio_idx i; - struct gpio_desc *gpiod; - - p->gpios = mctrl_gpio_init_noauto(dev, 0); - if (IS_ERR(p->gpios)) - return PTR_ERR(p->gpios); - - for (i = 0; i < UART_GPIO_MAX; i++) { - gpiod = mctrl_gpio_to_gpiod(p->gpios, i); - if (gpiod && (gpiod_get_direction(gpiod) == GPIOF_DIR_IN)) - p->gpio_irq[i] = gpiod_to_irq(gpiod); - else - p->gpio_irq[i] = -EINVAL; - } - - return 0; -} - static void atmel_serial_probe_fifos(struct atmel_uart_port *port, struct platform_device *pdev) { @@ -2788,16 +2681,16 @@ static int atmel_serial_probe(struct platform_device *pdev) spin_lock_init(&port->lock_suspended); - ret = atmel_init_gpios(port, &pdev->dev); - if (ret < 0) { - dev_err(&pdev->dev, "Failed to initialize GPIOs."); - goto err_clear_bit; - } - ret = atmel_init_port(port, pdev); if (ret) goto err_clear_bit; + port->gpios = mctrl_gpio_init(&port->uart, 0); + if (IS_ERR(port->gpios)) { + ret = PTR_ERR(port->gpios); + goto err_clear_bit; + } + if (!atmel_use_pdc_rx(&port->uart)) { ret = -ENOMEM; data = kmalloc(sizeof(struct atmel_uart_char) @@ -2866,37 +2759,14 @@ err: return ret; } -static int atmel_serial_remove(struct platform_device *pdev) -{ - struct uart_port *port = platform_get_drvdata(pdev); - struct atmel_uart_port *atmel_port = to_atmel_uart_port(port); - int ret = 0; - - tasklet_kill(&atmel_port->tasklet); - - device_init_wakeup(&pdev->dev, 0); - - ret = uart_remove_one_port(&atmel_uart, port); - - kfree(atmel_port->rx_ring.buf); - - /* "port" is allocated statically, so we shouldn't free it */ - - clear_bit(port->line, atmel_ports_in_use); - - clk_put(atmel_port->clk); - - return ret; -} - static struct platform_driver atmel_serial_driver = { .probe = atmel_serial_probe, - .remove = atmel_serial_remove, .suspend = atmel_serial_suspend, .resume = atmel_serial_resume, .driver = { - .name = "atmel_usart", - .of_match_table = of_match_ptr(atmel_serial_dt_ids), + .name = "atmel_usart", + .of_match_table = of_match_ptr(atmel_serial_dt_ids), + .suppress_bind_attrs = true, }, }; @@ -2914,17 +2784,4 @@ static int __init atmel_serial_init(void) return ret; } - -static void __exit atmel_serial_exit(void) -{ - platform_driver_unregister(&atmel_serial_driver); - uart_unregister_driver(&atmel_uart); -} - -module_init(atmel_serial_init); -module_exit(atmel_serial_exit); - -MODULE_AUTHOR("Rick Bronson"); -MODULE_DESCRIPTION("Atmel AT91 / AT32 serial port driver"); -MODULE_LICENSE("GPL"); -MODULE_ALIAS("platform:atmel_usart"); +device_initcall(atmel_serial_init); diff --git a/drivers/tty/serial/bcm63xx_uart.c b/drivers/tty/serial/bcm63xx_uart.c index a1c0a89d9..c28e5c24d 100644 --- a/drivers/tty/serial/bcm63xx_uart.c +++ b/drivers/tty/serial/bcm63xx_uart.c @@ -653,7 +653,7 @@ static struct uart_ops bcm_uart_ops = { #ifdef CONFIG_SERIAL_BCM63XX_CONSOLE -static inline void wait_for_xmitr(struct uart_port *port) +static void wait_for_xmitr(struct uart_port *port) { unsigned int tmout; diff --git a/drivers/tty/serial/bfin_uart.c b/drivers/tty/serial/bfin_uart.c index ae3cf94b1..293ecbb00 100644 --- a/drivers/tty/serial/bfin_uart.c +++ b/drivers/tty/serial/bfin_uart.c @@ -213,7 +213,7 @@ static void bfin_serial_stop_rx(struct uart_port *port) static void bfin_serial_rx_chars(struct bfin_serial_port *uart) { unsigned int status, ch, flg; - static struct timeval anomaly_start = { .tv_sec = 0 }; + static u64 anomaly_start; status = UART_GET_LSR(uart); UART_CLEAR_LSR(uart); @@ -246,27 +246,24 @@ static void bfin_serial_rx_chars(struct bfin_serial_port *uart) * character time +/- some percent. So 1.5 sounds good. All other * Blackfin families operate properly. Woo. */ - if (anomaly_start.tv_sec) { - struct timeval curr; - suseconds_t usecs; + if (anomaly_start > 0) { + u64 curr, nsecs, threshold_ns; if ((~ch & (~ch + 1)) & 0xff) goto known_good_char; - do_gettimeofday(&curr); - if (curr.tv_sec - anomaly_start.tv_sec > 1) + curr = ktime_get_ns(); + nsecs = curr - anomaly_start; + if (nsecs >> 32) goto known_good_char; - usecs = 0; - if (curr.tv_sec != anomaly_start.tv_sec) - usecs += USEC_PER_SEC; - usecs += curr.tv_usec - anomaly_start.tv_usec; - - if (usecs > UART_GET_ANOMALY_THRESHOLD(uart)) + threshold_ns = UART_GET_ANOMALY_THRESHOLD(uart) + * NSEC_PER_USEC; + if (nsecs > threshold_ns) goto known_good_char; if (ch) - anomaly_start.tv_sec = 0; + anomaly_start = 0; else anomaly_start = curr; @@ -274,14 +271,14 @@ static void bfin_serial_rx_chars(struct bfin_serial_port *uart) known_good_char: status &= ~BI; - anomaly_start.tv_sec = 0; + anomaly_start = 0; } } if (status & BI) { if (ANOMALY_05000363) if (bfin_revid() < 5) - do_gettimeofday(&anomaly_start); + anomaly_start = ktime_get_ns(); uart->port.icount.brk++; if (uart_handle_break(&uart->port)) goto ignore_char; diff --git a/drivers/tty/serial/earlycon.c b/drivers/tty/serial/earlycon.c index b5b2f2be6..3f2423690 100644 --- a/drivers/tty/serial/earlycon.c +++ b/drivers/tty/serial/earlycon.c @@ -71,10 +71,16 @@ static int __init parse_options(struct earlycon_device *device, char *options) return -EINVAL; switch (port->iotype) { + case UPIO_MEM: + port->mapbase = addr; + break; + case UPIO_MEM16: + port->regshift = 1; + port->mapbase = addr; + break; case UPIO_MEM32: case UPIO_MEM32BE: - port->regshift = 2; /* fall-through */ - case UPIO_MEM: + port->regshift = 2; port->mapbase = addr; break; case UPIO_PORT: @@ -91,10 +97,11 @@ static int __init parse_options(struct earlycon_device *device, char *options) strlcpy(device->options, options, length); } - if (port->iotype == UPIO_MEM || port->iotype == UPIO_MEM32 || - port->iotype == UPIO_MEM32BE) + if (port->iotype == UPIO_MEM || port->iotype == UPIO_MEM16 || + port->iotype == UPIO_MEM32 || port->iotype == UPIO_MEM32BE) pr_info("Early serial console at MMIO%s 0x%llx (options '%s')\n", (port->iotype == UPIO_MEM) ? "" : + (port->iotype == UPIO_MEM16) ? "16" : (port->iotype == UPIO_MEM32) ? "32" : "32be", (unsigned long long)port->mapbase, device->options); diff --git a/drivers/tty/serial/icom.c b/drivers/tty/serial/icom.c index c46fe1571..9495ef57c 100644 --- a/drivers/tty/serial/icom.c +++ b/drivers/tty/serial/icom.c @@ -22,7 +22,6 @@ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA * */ -#define SERIAL_DO_RESTART #include <linux/module.h> #include <linux/kernel.h> #include <linux/errno.h> diff --git a/drivers/tty/serial/imx.c b/drivers/tty/serial/imx.c index 016e4be05..9362f54c8 100644 --- a/drivers/tty/serial/imx.c +++ b/drivers/tty/serial/imx.c @@ -44,6 +44,8 @@ #include <linux/platform_data/serial-imx.h> #include <linux/platform_data/dma-imx.h> +#include "serial_mctrl_gpio.h" + /* Register definitions */ #define URXD0 0x0 /* Receiver Register */ #define URTX0 0x40 /* Transmitter Register */ @@ -148,8 +150,11 @@ #define USR2_TXFE (1<<14) /* Transmit buffer FIFO empty */ #define USR2_DTRF (1<<13) /* DTR edge interrupt flag */ #define USR2_IDLE (1<<12) /* Idle condition */ +#define USR2_RIDELT (1<<10) /* Ring Interrupt Delta */ +#define USR2_RIIN (1<<9) /* Ring Indicator Input */ #define USR2_IRINT (1<<8) /* Serial infrared interrupt flag */ #define USR2_WAKE (1<<7) /* Wake */ +#define USR2_DCDIN (1<<5) /* Data Carrier Detect Input */ #define USR2_RTSF (1<<4) /* RTS edge interrupt flag */ #define USR2_TXDC (1<<3) /* Transmitter complete */ #define USR2_BRCD (1<<2) /* Break condition */ @@ -206,6 +211,8 @@ struct imx_port { struct clk *clk_per; const struct imx_uart_data *devdata; + struct mctrl_gpios *gpios; + /* DMA fields */ unsigned int dma_is_inited:1; unsigned int dma_is_enabled:1; @@ -308,49 +315,24 @@ static void imx_port_ucrs_restore(struct uart_port *port, } #endif -/* - * Handle any change of modem status signal since we were last called. - */ -static void imx_mctrl_check(struct imx_port *sport) +static void imx_port_rts_active(struct imx_port *sport, unsigned long *ucr2) { - unsigned int status, changed; - - status = sport->port.ops->get_mctrl(&sport->port); - changed = status ^ sport->old_status; - - if (changed == 0) - return; - - sport->old_status = status; + *ucr2 &= ~UCR2_CTSC; + *ucr2 |= UCR2_CTS; - if (changed & TIOCM_RI) - sport->port.icount.rng++; - if (changed & TIOCM_DSR) - sport->port.icount.dsr++; - if (changed & TIOCM_CAR) - uart_handle_dcd_change(&sport->port, status & TIOCM_CAR); - if (changed & TIOCM_CTS) - uart_handle_cts_change(&sport->port, status & TIOCM_CTS); - - wake_up_interruptible(&sport->port.state->port.delta_msr_wait); + mctrl_gpio_set(sport->gpios, sport->port.mctrl | TIOCM_RTS); } -/* - * This is our per-port timeout handler, for checking the - * modem status signals. - */ -static void imx_timeout(unsigned long data) +static void imx_port_rts_inactive(struct imx_port *sport, unsigned long *ucr2) { - struct imx_port *sport = (struct imx_port *)data; - unsigned long flags; + *ucr2 &= ~(UCR2_CTSC | UCR2_CTS); - if (sport->port.state) { - spin_lock_irqsave(&sport->port.lock, flags); - imx_mctrl_check(sport); - spin_unlock_irqrestore(&sport->port.lock, flags); + mctrl_gpio_set(sport->gpios, sport->port.mctrl & ~TIOCM_RTS); +} - mod_timer(&sport->timer, jiffies + MCTRL_TIMEOUT); - } +static void imx_port_rts_auto(struct imx_port *sport, unsigned long *ucr2) +{ + *ucr2 |= UCR2_CTSC; } /* @@ -376,9 +358,9 @@ static void imx_stop_tx(struct uart_port *port) readl(port->membase + USR2) & USR2_TXDC) { temp = readl(port->membase + UCR2); if (port->rs485.flags & SER_RS485_RTS_AFTER_SEND) - temp &= ~UCR2_CTS; + imx_port_rts_inactive(sport, &temp); else - temp |= UCR2_CTS; + imx_port_rts_active(sport, &temp); writel(temp, port->membase + UCR2); temp = readl(port->membase + UCR4); @@ -420,6 +402,8 @@ static void imx_enable_ms(struct uart_port *port) struct imx_port *sport = (struct imx_port *)port; mod_timer(&sport->timer, jiffies); + + mctrl_gpio_enable_ms(sport->gpios); } static void imx_dma_tx(struct imx_port *sport); @@ -579,14 +563,14 @@ static void imx_start_tx(struct uart_port *port) unsigned long temp; if (port->rs485.flags & SER_RS485_ENABLED) { - /* enable transmitter and shifter empty irq */ temp = readl(port->membase + UCR2); if (port->rs485.flags & SER_RS485_RTS_ON_SEND) - temp &= ~UCR2_CTS; + imx_port_rts_inactive(sport, &temp); else - temp |= UCR2_CTS; + imx_port_rts_active(sport, &temp); writel(temp, port->membase + UCR2); + /* enable transmitter and shifter empty irq */ temp = readl(port->membase + UCR4); temp |= UCR4_TCEN; writel(temp, port->membase + UCR4); @@ -801,23 +785,35 @@ static unsigned int imx_tx_empty(struct uart_port *port) /* * We have a modem side uart, so the meanings of RTS and CTS are inverted. */ -static unsigned int imx_get_mctrl(struct uart_port *port) +static unsigned int imx_get_hwmctrl(struct imx_port *sport) { - struct imx_port *sport = (struct imx_port *)port; - unsigned int tmp = TIOCM_DSR | TIOCM_CAR; + unsigned int tmp = TIOCM_DSR; + unsigned usr1 = readl(sport->port.membase + USR1); - if (readl(sport->port.membase + USR1) & USR1_RTSS) + if (usr1 & USR1_RTSS) tmp |= TIOCM_CTS; - if (readl(sport->port.membase + UCR2) & UCR2_CTS) - tmp |= TIOCM_RTS; + /* in DCE mode DCDIN is always 0 */ + if (!(usr1 & USR2_DCDIN)) + tmp |= TIOCM_CAR; - if (readl(sport->port.membase + uts_reg(sport)) & UTS_LOOP) - tmp |= TIOCM_LOOP; + /* in DCE mode RIIN is always 0 */ + if (readl(sport->port.membase + USR2) & USR2_RIIN) + tmp |= TIOCM_RI; return tmp; } +static unsigned int imx_get_mctrl(struct uart_port *port) +{ + struct imx_port *sport = (struct imx_port *)port; + unsigned int ret = imx_get_hwmctrl(sport); + + mctrl_gpio_get(sport->gpios, &ret); + + return ret; +} + static void imx_set_mctrl(struct uart_port *port, unsigned int mctrl) { struct imx_port *sport = (struct imx_port *)port; @@ -831,10 +827,17 @@ static void imx_set_mctrl(struct uart_port *port, unsigned int mctrl) writel(temp, sport->port.membase + UCR2); } + temp = readl(sport->port.membase + UCR3) & ~UCR3_DSR; + if (!(mctrl & TIOCM_DTR)) + temp |= UCR3_DSR; + writel(temp, sport->port.membase + UCR3); + temp = readl(sport->port.membase + uts_reg(sport)) & ~UTS_LOOP; if (mctrl & TIOCM_LOOP) temp |= UTS_LOOP; writel(temp, sport->port.membase + uts_reg(sport)); + + mctrl_gpio_set(sport->gpios, mctrl); } /* @@ -857,6 +860,51 @@ static void imx_break_ctl(struct uart_port *port, int break_state) spin_unlock_irqrestore(&sport->port.lock, flags); } +/* + * Handle any change of modem status signal since we were last called. + */ +static void imx_mctrl_check(struct imx_port *sport) +{ + unsigned int status, changed; + + status = imx_get_hwmctrl(sport); + changed = status ^ sport->old_status; + + if (changed == 0) + return; + + sport->old_status = status; + + if (changed & TIOCM_RI) + sport->port.icount.rng++; + if (changed & TIOCM_DSR) + sport->port.icount.dsr++; + if (changed & TIOCM_CAR) + uart_handle_dcd_change(&sport->port, status & TIOCM_CAR); + if (changed & TIOCM_CTS) + uart_handle_cts_change(&sport->port, status & TIOCM_CTS); + + wake_up_interruptible(&sport->port.state->port.delta_msr_wait); +} + +/* + * This is our per-port timeout handler, for checking the + * modem status signals. + */ +static void imx_timeout(unsigned long data) +{ + struct imx_port *sport = (struct imx_port *)data; + unsigned long flags; + + if (sport->port.state) { + spin_lock_irqsave(&sport->port.lock, flags); + imx_mctrl_check(sport); + spin_unlock_irqrestore(&sport->port.lock, flags); + + mod_timer(&sport->timer, jiffies + MCTRL_TIMEOUT); + } +} + #define RX_BUF_SIZE (PAGE_SIZE) static void imx_rx_dma_done(struct imx_port *sport) { @@ -1207,6 +1255,8 @@ static void imx_shutdown(struct uart_port *port) imx_uart_dma_exit(sport); } + mctrl_gpio_disable_ms(sport->gpios); + spin_lock_irqsave(&sport->port.lock, flags); temp = readl(sport->port.membase + UCR2); temp &= ~(UCR2_TXEN); @@ -1284,9 +1334,10 @@ imx_set_termios(struct uart_port *port, struct ktermios *termios, { struct imx_port *sport = (struct imx_port *)port; unsigned long flags; - unsigned int ucr2, old_ucr1, old_ucr2, baud, quot; + unsigned long ucr2, old_ucr1, old_ucr2; + unsigned int baud, quot; unsigned int old_csize = old ? old->c_cflag & CSIZE : CS8; - unsigned int div, ufcr; + unsigned long div, ufcr; unsigned long num, denom; uint64_t tdiv64; @@ -1315,19 +1366,25 @@ imx_set_termios(struct uart_port *port, struct ktermios *termios, * it under manual control and keep transmitter * disabled. */ - if (!(port->rs485.flags & - SER_RS485_RTS_AFTER_SEND)) - ucr2 |= UCR2_CTS; + if (port->rs485.flags & + SER_RS485_RTS_AFTER_SEND) + imx_port_rts_inactive(sport, &ucr2); + else + imx_port_rts_active(sport, &ucr2); } else { - ucr2 |= UCR2_CTSC; + imx_port_rts_auto(sport, &ucr2); } } else { termios->c_cflag &= ~CRTSCTS; } - } else if (port->rs485.flags & SER_RS485_ENABLED) + } else if (port->rs485.flags & SER_RS485_ENABLED) { /* disable transmitter */ - if (!(port->rs485.flags & SER_RS485_RTS_AFTER_SEND)) - ucr2 |= UCR2_CTS; + if (port->rs485.flags & SER_RS485_RTS_AFTER_SEND) + imx_port_rts_inactive(sport, &ucr2); + else + imx_port_rts_active(sport, &ucr2); + } + if (termios->c_cflag & CSTOPB) ucr2 |= UCR2_STPB; @@ -1568,11 +1625,10 @@ static int imx_rs485_config(struct uart_port *port, /* disable transmitter */ temp = readl(sport->port.membase + UCR2); - temp &= ~UCR2_CTSC; if (rs485conf->flags & SER_RS485_RTS_AFTER_SEND) - temp &= ~UCR2_CTS; + imx_port_rts_inactive(sport, &temp); else - temp |= UCR2_CTS; + imx_port_rts_active(sport, &temp); writel(temp, sport->port.membase + UCR2); } @@ -1857,11 +1913,10 @@ static int serial_imx_probe_dt(struct imx_port *sport, struct platform_device *pdev) { struct device_node *np = pdev->dev.of_node; - const struct of_device_id *of_id = - of_match_device(imx_uart_dt_ids, &pdev->dev); int ret; - if (!np) + sport->devdata = of_device_get_match_data(&pdev->dev); + if (!sport->devdata) /* no device tree device */ return 1; @@ -1878,8 +1933,6 @@ static int serial_imx_probe_dt(struct imx_port *sport, if (of_get_property(np, "fsl,dte-mode", NULL)) sport->dte_mode = 1; - sport->devdata = of_id->data; - return 0; } #else @@ -1948,6 +2001,10 @@ static int serial_imx_probe(struct platform_device *pdev) sport->timer.function = imx_timeout; sport->timer.data = (unsigned long)sport; + sport->gpios = mctrl_gpio_init(&sport->port, 0); + if (IS_ERR(sport->gpios)) + return PTR_ERR(sport->gpios); + sport->clk_ipg = devm_clk_get(&pdev->dev, "ipg"); if (IS_ERR(sport->clk_ipg)) { ret = PTR_ERR(sport->clk_ipg); diff --git a/drivers/tty/serial/jsm/jsm_driver.c b/drivers/tty/serial/jsm/jsm_driver.c index efbd87a76..a119f11bf 100644 --- a/drivers/tty/serial/jsm/jsm_driver.c +++ b/drivers/tty/serial/jsm/jsm_driver.c @@ -70,7 +70,7 @@ static int jsm_probe_one(struct pci_dev *pdev, const struct pci_device_id *ent) goto out; } - rc = pci_request_regions(pdev, "jsm"); + rc = pci_request_regions(pdev, JSM_DRIVER_NAME); if (rc) { dev_err(&pdev->dev, "pci_request_region FAILED\n"); goto out_disable_device; @@ -328,7 +328,7 @@ static struct pci_device_id jsm_pci_tbl[] = { MODULE_DEVICE_TABLE(pci, jsm_pci_tbl); static struct pci_driver jsm_driver = { - .name = "jsm", + .name = JSM_DRIVER_NAME, .id_table = jsm_pci_tbl, .probe = jsm_probe_one, .remove = jsm_remove_one, diff --git a/drivers/tty/serial/jsm/jsm_neo.c b/drivers/tty/serial/jsm/jsm_neo.c index 932b2accd..c6fdd6369 100644 --- a/drivers/tty/serial/jsm/jsm_neo.c +++ b/drivers/tty/serial/jsm/jsm_neo.c @@ -714,7 +714,7 @@ static void neo_clear_break(struct jsm_channel *ch) /* * Parse the ISR register. */ -static inline void neo_parse_isr(struct jsm_board *brd, u32 port) +static void neo_parse_isr(struct jsm_board *brd, u32 port) { struct jsm_channel *ch; u8 isr; diff --git a/drivers/tty/serial/m32r_sio.c b/drivers/tty/serial/m32r_sio.c index 8f7f83a14..0eeb64f24 100644 --- a/drivers/tty/serial/m32r_sio.c +++ b/drivers/tty/serial/m32r_sio.c @@ -990,7 +990,7 @@ static void __init m32r_sio_register_ports(struct uart_driver *drv) /* * Wait for transmitter & holding register to empty */ -static inline void wait_for_xmitr(struct uart_sio_port *up) +static void wait_for_xmitr(struct uart_sio_port *up) { unsigned int status, tmout = 10000; diff --git a/drivers/tty/serial/max310x.c b/drivers/tty/serial/max310x.c index d45133056..3f98165b4 100644 --- a/drivers/tty/serial/max310x.c +++ b/drivers/tty/serial/max310x.c @@ -1174,7 +1174,7 @@ static int max310x_probe(struct device *dev, struct max310x_devtype *devtype, #ifdef CONFIG_GPIOLIB /* Setup GPIO cotroller */ s->gpio.owner = THIS_MODULE; - s->gpio.dev = dev; + s->gpio.parent = dev; s->gpio.label = dev_name(dev); s->gpio.direction_input = max310x_gpio_direction_input; s->gpio.get = max310x_gpio_get; diff --git a/drivers/tty/serial/men_z135_uart.c b/drivers/tty/serial/men_z135_uart.c index 3141aa208..a44290e9b 100644 --- a/drivers/tty/serial/men_z135_uart.c +++ b/drivers/tty/serial/men_z135_uart.c @@ -158,7 +158,7 @@ static inline void men_z135_reg_set(struct men_z135_port *uart, * @addr: Register address * @val: value to clear */ -static inline void men_z135_reg_clr(struct men_z135_port *uart, +static void men_z135_reg_clr(struct men_z135_port *uart, u32 addr, u32 val) { struct uart_port *port = &uart->port; diff --git a/drivers/tty/serial/meson_uart.c b/drivers/tty/serial/meson_uart.c index 0fc83c962..b12a37bd3 100644 --- a/drivers/tty/serial/meson_uart.c +++ b/drivers/tty/serial/meson_uart.c @@ -57,6 +57,7 @@ #define AML_UART_RX_EMPTY BIT(20) #define AML_UART_TX_FULL BIT(21) #define AML_UART_TX_EMPTY BIT(22) +#define AML_UART_XMIT_BUSY BIT(25) #define AML_UART_ERR (AML_UART_PARITY_ERR | \ AML_UART_FRAME_ERR | \ AML_UART_TX_FIFO_WERR) @@ -100,7 +101,8 @@ static unsigned int meson_uart_tx_empty(struct uart_port *port) u32 val; val = readl(port->membase + AML_UART_STATUS); - return (val & AML_UART_TX_EMPTY) ? TIOCSER_TEMT : 0; + val &= (AML_UART_TX_EMPTY | AML_UART_XMIT_BUSY); + return (val == AML_UART_TX_EMPTY) ? TIOCSER_TEMT : 0; } static void meson_uart_stop_tx(struct uart_port *port) @@ -108,7 +110,7 @@ static void meson_uart_stop_tx(struct uart_port *port) u32 val; val = readl(port->membase + AML_UART_CONTROL); - val &= ~AML_UART_TX_EN; + val &= ~AML_UART_TX_INT_EN; writel(val, port->membase + AML_UART_CONTROL); } @@ -131,7 +133,7 @@ static void meson_uart_shutdown(struct uart_port *port) spin_lock_irqsave(&port->lock, flags); val = readl(port->membase + AML_UART_CONTROL); - val &= ~(AML_UART_RX_EN | AML_UART_TX_EN); + val &= ~AML_UART_RX_EN; val &= ~(AML_UART_RX_INT_EN | AML_UART_TX_INT_EN); writel(val, port->membase + AML_UART_CONTROL); @@ -142,6 +144,7 @@ static void meson_uart_start_tx(struct uart_port *port) { struct circ_buf *xmit = &port->state->xmit; unsigned int ch; + u32 val; if (uart_tx_stopped(port)) { meson_uart_stop_tx(port); @@ -165,6 +168,12 @@ static void meson_uart_start_tx(struct uart_port *port) port->icount.tx++; } + if (!uart_circ_empty(xmit)) { + val = readl(port->membase + AML_UART_CONTROL); + val |= AML_UART_TX_INT_EN; + writel(val, port->membase + AML_UART_CONTROL); + } + if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) uart_write_wakeup(port); } @@ -228,8 +237,10 @@ static irqreturn_t meson_uart_interrupt(int irq, void *dev_id) if (!(readl(port->membase + AML_UART_STATUS) & AML_UART_RX_EMPTY)) meson_receive_chars(port); - if (!(readl(port->membase + AML_UART_STATUS) & AML_UART_TX_FULL)) - meson_uart_start_tx(port); + if (!(readl(port->membase + AML_UART_STATUS) & AML_UART_TX_FULL)) { + if (readl(port->membase + AML_UART_CONTROL) & AML_UART_TX_INT_EN) + meson_uart_start_tx(port); + } spin_unlock(&port->lock); @@ -241,10 +252,9 @@ static const char *meson_uart_type(struct uart_port *port) return (port->type == PORT_MESON) ? "meson_uart" : NULL; } -static int meson_uart_startup(struct uart_port *port) +static void meson_uart_reset(struct uart_port *port) { u32 val; - int ret = 0; val = readl(port->membase + AML_UART_CONTROL); val |= (AML_UART_RX_RST | AML_UART_TX_RST | AML_UART_CLR_ERR); @@ -252,6 +262,18 @@ static int meson_uart_startup(struct uart_port *port) val &= ~(AML_UART_RX_RST | AML_UART_TX_RST | AML_UART_CLR_ERR); writel(val, port->membase + AML_UART_CONTROL); +} + +static int meson_uart_startup(struct uart_port *port) +{ + u32 val; + int ret = 0; + + val = readl(port->membase + AML_UART_CONTROL); + val |= AML_UART_CLR_ERR; + writel(val, port->membase + AML_UART_CONTROL); + val &= ~AML_UART_CLR_ERR; + writel(val, port->membase + AML_UART_CONTROL); val |= (AML_UART_RX_EN | AML_UART_TX_EN); writel(val, port->membase + AML_UART_CONTROL); @@ -272,7 +294,7 @@ static void meson_uart_change_speed(struct uart_port *port, unsigned long baud) { u32 val; - while (!(readl(port->membase + AML_UART_STATUS) & AML_UART_TX_EMPTY)) + while (!meson_uart_tx_empty(port)) cpu_relax(); val = readl(port->membase + AML_UART_REG5); @@ -367,9 +389,26 @@ static int meson_uart_verify_port(struct uart_port *port, return ret; } +static int meson_uart_res_size(struct uart_port *port) +{ + struct platform_device *pdev = to_platform_device(port->dev); + struct resource *res; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) { + dev_err(port->dev, "cannot obtain I/O memory region"); + return -ENODEV; + } + + return resource_size(res); +} + static void meson_uart_release_port(struct uart_port *port) { + int size = meson_uart_res_size(port); + if (port->flags & UPF_IOREMAP) { + devm_release_mem_region(port->dev, port->mapbase, size); devm_iounmap(port->dev, port->membase); port->membase = NULL; } @@ -377,16 +416,10 @@ static void meson_uart_release_port(struct uart_port *port) static int meson_uart_request_port(struct uart_port *port) { - struct platform_device *pdev = to_platform_device(port->dev); - struct resource *res; - int size; + int size = meson_uart_res_size(port); - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!res) { - dev_err(&pdev->dev, "cannot obtain I/O memory region"); - return -ENODEV; - } - size = resource_size(res); + if (size < 0) + return size; if (!devm_request_mem_region(port->dev, port->mapbase, size, dev_name(port->dev))) { @@ -448,6 +481,7 @@ static void meson_serial_console_write(struct console *co, const char *s, struct uart_port *port; unsigned long flags; int locked; + u32 val, tmp; port = meson_ports[co->index]; if (!port) @@ -463,7 +497,13 @@ static void meson_serial_console_write(struct console *co, const char *s, locked = 1; } + val = readl(port->membase + AML_UART_CONTROL); + val |= AML_UART_TX_EN; + tmp = val & ~(AML_UART_TX_INT_EN | AML_UART_RX_INT_EN); + writel(tmp, port->membase + AML_UART_CONTROL); + uart_console_write(port, s, count, meson_console_putchar); + writel(val, port->membase + AML_UART_CONTROL); if (locked) spin_unlock(&port->lock); @@ -570,6 +610,12 @@ static int meson_uart_probe(struct platform_device *pdev) meson_ports[pdev->id] = port; platform_set_drvdata(pdev, port); + /* reset port before registering (and possibly registering console) */ + if (meson_uart_request_port(port) >= 0) { + meson_uart_reset(port); + meson_uart_release_port(port); + } + ret = uart_add_one_port(&meson_uart_driver, port); if (ret) meson_ports[pdev->id] = NULL; diff --git a/drivers/tty/serial/nwpserial.c b/drivers/tty/serial/nwpserial.c deleted file mode 100644 index 5da7622e8..000000000 --- a/drivers/tty/serial/nwpserial.c +++ /dev/null @@ -1,477 +0,0 @@ -/* - * Serial Port driver for a NWP uart device - * - * Copyright (C) 2008 IBM Corp., Benjamin Krill <ben@codiert.org> - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - * - */ -#include <linux/init.h> -#include <linux/export.h> -#include <linux/console.h> -#include <linux/serial.h> -#include <linux/serial_reg.h> -#include <linux/serial_core.h> -#include <linux/tty.h> -#include <linux/tty_flip.h> -#include <linux/irqreturn.h> -#include <linux/mutex.h> -#include <linux/of_platform.h> -#include <linux/of_device.h> -#include <linux/nwpserial.h> -#include <linux/delay.h> -#include <asm/prom.h> -#include <asm/dcr.h> - -#define NWPSERIAL_NR 2 - -#define NWPSERIAL_STATUS_RXVALID 0x1 -#define NWPSERIAL_STATUS_TXFULL 0x2 - -struct nwpserial_port { - struct uart_port port; - dcr_host_t dcr_host; - unsigned int ier; - unsigned int mcr; -}; - -static DEFINE_MUTEX(nwpserial_mutex); -static struct nwpserial_port nwpserial_ports[NWPSERIAL_NR]; - -static void wait_for_bits(struct nwpserial_port *up, int bits) -{ - unsigned int status, tmout = 10000; - - /* Wait up to 10ms for the character(s) to be sent. */ - do { - status = dcr_read(up->dcr_host, UART_LSR); - - if (--tmout == 0) - break; - udelay(1); - } while ((status & bits) != bits); -} - -#ifdef CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL_CONSOLE -static void nwpserial_console_putchar(struct uart_port *port, int c) -{ - struct nwpserial_port *up; - up = container_of(port, struct nwpserial_port, port); - /* check if tx buffer is full */ - wait_for_bits(up, UART_LSR_THRE); - dcr_write(up->dcr_host, UART_TX, c); - up->port.icount.tx++; -} - -static void -nwpserial_console_write(struct console *co, const char *s, unsigned int count) -{ - struct nwpserial_port *up = &nwpserial_ports[co->index]; - unsigned long flags; - int locked = 1; - - if (oops_in_progress) - locked = spin_trylock_irqsave(&up->port.lock, flags); - else - spin_lock_irqsave(&up->port.lock, flags); - - /* save and disable interrupt */ - up->ier = dcr_read(up->dcr_host, UART_IER); - dcr_write(up->dcr_host, UART_IER, up->ier & ~UART_IER_RDI); - - uart_console_write(&up->port, s, count, nwpserial_console_putchar); - - /* wait for transmitter to become empty */ - while ((dcr_read(up->dcr_host, UART_LSR) & UART_LSR_THRE) == 0) - cpu_relax(); - - /* restore interrupt state */ - dcr_write(up->dcr_host, UART_IER, up->ier); - - if (locked) - spin_unlock_irqrestore(&up->port.lock, flags); -} - -static struct uart_driver nwpserial_reg; -static struct console nwpserial_console = { - .name = "ttySQ", - .write = nwpserial_console_write, - .device = uart_console_device, - .flags = CON_PRINTBUFFER, - .index = -1, - .data = &nwpserial_reg, -}; -#define NWPSERIAL_CONSOLE (&nwpserial_console) -#else -#define NWPSERIAL_CONSOLE NULL -#endif /* CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL_CONSOLE */ - -/**************************************************************************/ - -static int nwpserial_request_port(struct uart_port *port) -{ - return 0; -} - -static void nwpserial_release_port(struct uart_port *port) -{ - /* N/A */ -} - -static void nwpserial_config_port(struct uart_port *port, int flags) -{ - port->type = PORT_NWPSERIAL; -} - -static irqreturn_t nwpserial_interrupt(int irq, void *dev_id) -{ - struct nwpserial_port *up = dev_id; - struct tty_port *port = &up->port.state->port; - irqreturn_t ret; - unsigned int iir; - unsigned char ch; - - spin_lock(&up->port.lock); - - /* check if the uart was the interrupt source. */ - iir = dcr_read(up->dcr_host, UART_IIR); - if (!iir) { - ret = IRQ_NONE; - goto out; - } - - do { - up->port.icount.rx++; - ch = dcr_read(up->dcr_host, UART_RX); - if (up->port.ignore_status_mask != NWPSERIAL_STATUS_RXVALID) - tty_insert_flip_char(port, ch, TTY_NORMAL); - } while (dcr_read(up->dcr_host, UART_LSR) & UART_LSR_DR); - - spin_unlock(&up->port.lock); - tty_flip_buffer_push(port); - spin_lock(&up->port.lock); - - ret = IRQ_HANDLED; - - /* clear interrupt */ - dcr_write(up->dcr_host, UART_IIR, 1); -out: - spin_unlock(&up->port.lock); - return ret; -} - -static int nwpserial_startup(struct uart_port *port) -{ - struct nwpserial_port *up; - int err; - - up = container_of(port, struct nwpserial_port, port); - - /* disable flow control by default */ - up->mcr = dcr_read(up->dcr_host, UART_MCR) & ~UART_MCR_AFE; - dcr_write(up->dcr_host, UART_MCR, up->mcr); - - /* register interrupt handler */ - err = request_irq(up->port.irq, nwpserial_interrupt, - IRQF_SHARED, "nwpserial", up); - if (err) - return err; - - /* enable interrupts */ - up->ier = UART_IER_RDI; - dcr_write(up->dcr_host, UART_IER, up->ier); - - /* enable receiving */ - up->port.ignore_status_mask &= ~NWPSERIAL_STATUS_RXVALID; - - return 0; -} - -static void nwpserial_shutdown(struct uart_port *port) -{ - struct nwpserial_port *up; - up = container_of(port, struct nwpserial_port, port); - - /* disable receiving */ - up->port.ignore_status_mask |= NWPSERIAL_STATUS_RXVALID; - - /* disable interrupts from this port */ - up->ier = 0; - dcr_write(up->dcr_host, UART_IER, up->ier); - - /* free irq */ - free_irq(up->port.irq, up); -} - -static int nwpserial_verify_port(struct uart_port *port, - struct serial_struct *ser) -{ - return -EINVAL; -} - -static const char *nwpserial_type(struct uart_port *port) -{ - return port->type == PORT_NWPSERIAL ? "nwpserial" : NULL; -} - -static void nwpserial_set_termios(struct uart_port *port, - struct ktermios *termios, struct ktermios *old) -{ - struct nwpserial_port *up; - up = container_of(port, struct nwpserial_port, port); - - up->port.read_status_mask = NWPSERIAL_STATUS_RXVALID - | NWPSERIAL_STATUS_TXFULL; - - up->port.ignore_status_mask = 0; - /* ignore all characters if CREAD is not set */ - if ((termios->c_cflag & CREAD) == 0) - up->port.ignore_status_mask |= NWPSERIAL_STATUS_RXVALID; - - /* Copy back the old hardware settings */ - if (old) - tty_termios_copy_hw(termios, old); -} - -static void nwpserial_break_ctl(struct uart_port *port, int ctl) -{ - /* N/A */ -} - -static void nwpserial_stop_rx(struct uart_port *port) -{ - struct nwpserial_port *up; - up = container_of(port, struct nwpserial_port, port); - /* don't forward any more data (like !CREAD) */ - up->port.ignore_status_mask = NWPSERIAL_STATUS_RXVALID; -} - -static void nwpserial_putchar(struct nwpserial_port *up, unsigned char c) -{ - /* check if tx buffer is full */ - wait_for_bits(up, UART_LSR_THRE); - dcr_write(up->dcr_host, UART_TX, c); - up->port.icount.tx++; -} - -static void nwpserial_start_tx(struct uart_port *port) -{ - struct nwpserial_port *up; - struct circ_buf *xmit; - up = container_of(port, struct nwpserial_port, port); - xmit = &up->port.state->xmit; - - if (port->x_char) { - nwpserial_putchar(up, up->port.x_char); - port->x_char = 0; - } - - while (!(uart_circ_empty(xmit) || uart_tx_stopped(&up->port))) { - nwpserial_putchar(up, xmit->buf[xmit->tail]); - xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE-1); - } -} - -static unsigned int nwpserial_get_mctrl(struct uart_port *port) -{ - return 0; -} - -static void nwpserial_set_mctrl(struct uart_port *port, unsigned int mctrl) -{ - /* N/A */ -} - -static void nwpserial_stop_tx(struct uart_port *port) -{ - /* N/A */ -} - -static unsigned int nwpserial_tx_empty(struct uart_port *port) -{ - struct nwpserial_port *up; - unsigned long flags; - int ret; - up = container_of(port, struct nwpserial_port, port); - - spin_lock_irqsave(&up->port.lock, flags); - ret = dcr_read(up->dcr_host, UART_LSR); - spin_unlock_irqrestore(&up->port.lock, flags); - - return ret & UART_LSR_TEMT ? TIOCSER_TEMT : 0; -} - -static struct uart_ops nwpserial_pops = { - .tx_empty = nwpserial_tx_empty, - .set_mctrl = nwpserial_set_mctrl, - .get_mctrl = nwpserial_get_mctrl, - .stop_tx = nwpserial_stop_tx, - .start_tx = nwpserial_start_tx, - .stop_rx = nwpserial_stop_rx, - .break_ctl = nwpserial_break_ctl, - .startup = nwpserial_startup, - .shutdown = nwpserial_shutdown, - .set_termios = nwpserial_set_termios, - .type = nwpserial_type, - .release_port = nwpserial_release_port, - .request_port = nwpserial_request_port, - .config_port = nwpserial_config_port, - .verify_port = nwpserial_verify_port, -}; - -static struct uart_driver nwpserial_reg = { - .owner = THIS_MODULE, - .driver_name = "nwpserial", - .dev_name = "ttySQ", - .major = TTY_MAJOR, - .minor = 68, - .nr = NWPSERIAL_NR, - .cons = NWPSERIAL_CONSOLE, -}; - -int nwpserial_register_port(struct uart_port *port) -{ - struct nwpserial_port *up = NULL; - int ret = -1; - int i; - static int first = 1; - int dcr_len; - int dcr_base; - struct device_node *dn; - - mutex_lock(&nwpserial_mutex); - - dn = port->dev->of_node; - if (dn == NULL) - goto out; - - /* get dcr base. */ - dcr_base = dcr_resource_start(dn, 0); - - /* find matching entry */ - for (i = 0; i < NWPSERIAL_NR; i++) - if (nwpserial_ports[i].port.iobase == dcr_base) { - up = &nwpserial_ports[i]; - break; - } - - /* we didn't find a mtching entry, search for a free port */ - if (up == NULL) - for (i = 0; i < NWPSERIAL_NR; i++) - if (nwpserial_ports[i].port.type == PORT_UNKNOWN && - nwpserial_ports[i].port.iobase == 0) { - up = &nwpserial_ports[i]; - break; - } - - if (up == NULL) { - ret = -EBUSY; - goto out; - } - - if (first) - uart_register_driver(&nwpserial_reg); - first = 0; - - up->port.membase = port->membase; - up->port.irq = port->irq; - up->port.uartclk = port->uartclk; - up->port.fifosize = port->fifosize; - up->port.regshift = port->regshift; - up->port.iotype = port->iotype; - up->port.flags = port->flags; - up->port.mapbase = port->mapbase; - up->port.private_data = port->private_data; - - if (port->dev) - up->port.dev = port->dev; - - if (up->port.iobase != dcr_base) { - up->port.ops = &nwpserial_pops; - up->port.fifosize = 16; - - spin_lock_init(&up->port.lock); - - up->port.iobase = dcr_base; - dcr_len = dcr_resource_len(dn, 0); - - up->dcr_host = dcr_map(dn, dcr_base, dcr_len); - if (!DCR_MAP_OK(up->dcr_host)) { - printk(KERN_ERR "Cannot map DCR resources for NWPSERIAL"); - goto out; - } - } - - ret = uart_add_one_port(&nwpserial_reg, &up->port); - if (ret == 0) - ret = up->port.line; - -out: - mutex_unlock(&nwpserial_mutex); - - return ret; -} -EXPORT_SYMBOL(nwpserial_register_port); - -void nwpserial_unregister_port(int line) -{ - struct nwpserial_port *up = &nwpserial_ports[line]; - mutex_lock(&nwpserial_mutex); - uart_remove_one_port(&nwpserial_reg, &up->port); - - up->port.type = PORT_UNKNOWN; - - mutex_unlock(&nwpserial_mutex); -} -EXPORT_SYMBOL(nwpserial_unregister_port); - -#ifdef CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL_CONSOLE -static int __init nwpserial_console_init(void) -{ - struct nwpserial_port *up = NULL; - struct device_node *dn; - const char *name; - int dcr_base; - int dcr_len; - int i; - - /* search for a free port */ - for (i = 0; i < NWPSERIAL_NR; i++) - if (nwpserial_ports[i].port.type == PORT_UNKNOWN) { - up = &nwpserial_ports[i]; - break; - } - - if (up == NULL) - return -1; - - name = of_get_property(of_chosen, "linux,stdout-path", NULL); - if (name == NULL) - return -1; - - dn = of_find_node_by_path(name); - if (!dn) - return -1; - - spin_lock_init(&up->port.lock); - up->port.ops = &nwpserial_pops; - up->port.type = PORT_NWPSERIAL; - up->port.fifosize = 16; - - dcr_base = dcr_resource_start(dn, 0); - dcr_len = dcr_resource_len(dn, 0); - up->port.iobase = dcr_base; - - up->dcr_host = dcr_map(dn, dcr_base, dcr_len); - if (!DCR_MAP_OK(up->dcr_host)) { - printk("Cannot map DCR resources for SERIAL"); - return -1; - } - register_console(&nwpserial_console); - return 0; -} -console_initcall(nwpserial_console_init); -#endif /* CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL_CONSOLE */ diff --git a/drivers/tty/serial/omap-serial.c b/drivers/tty/serial/omap-serial.c index 24280d9a0..fa49eb1e2 100644 --- a/drivers/tty/serial/omap-serial.c +++ b/drivers/tty/serial/omap-serial.c @@ -1165,7 +1165,7 @@ serial_omap_type(struct uart_port *port) #define BOTH_EMPTY (UART_LSR_TEMT | UART_LSR_THRE) -static inline void wait_for_xmitr(struct uart_omap_port *up) +static void __maybe_unused wait_for_xmitr(struct uart_omap_port *up) { unsigned int status, tmout = 10000; diff --git a/drivers/tty/serial/pxa.c b/drivers/tty/serial/pxa.c index 9becba654..41eab75ba 100644 --- a/drivers/tty/serial/pxa.c +++ b/drivers/tty/serial/pxa.c @@ -603,7 +603,7 @@ static struct uart_driver serial_pxa_reg; /* * Wait for transmitter & holding register to empty */ -static inline void wait_for_xmitr(struct uart_pxa_port *up) +static void wait_for_xmitr(struct uart_pxa_port *up) { unsigned int status, tmout = 10000; diff --git a/drivers/tty/serial/sc16is7xx.c b/drivers/tty/serial/sc16is7xx.c index edb5305b9..13f8d5f70 100644 --- a/drivers/tty/serial/sc16is7xx.c +++ b/drivers/tty/serial/sc16is7xx.c @@ -389,6 +389,13 @@ static void sc16is7xx_fifo_write(struct uart_port *port, u8 to_send) const u8 line = sc16is7xx_line(port); u8 addr = (SC16IS7XX_THR_REG << SC16IS7XX_REG_SHIFT) | line; + /* + * Don't send zero-length data, at least on SPI it confuses the chip + * delivering wrong TXLVL data. + */ + if (unlikely(!to_send)) + return; + regcache_cache_bypass(s->regmap, true); regmap_raw_write(s->regmap, addr, s->buf, to_send); regcache_cache_bypass(s->regmap, false); @@ -630,6 +637,12 @@ static void sc16is7xx_handle_tx(struct uart_port *port) if (likely(to_send)) { /* Limit to size of TX FIFO */ txlen = sc16is7xx_port_read(port, SC16IS7XX_TXLVL_REG); + if (txlen > SC16IS7XX_FIFO_SIZE) { + dev_err_ratelimited(port->dev, + "chip reports %d free bytes in TX fifo, but it only has %d", + txlen, SC16IS7XX_FIFO_SIZE); + txlen = 0; + } to_send = (to_send > txlen) ? txlen : to_send; /* Add data to send */ @@ -1180,7 +1193,7 @@ static int sc16is7xx_probe(struct device *dev, if (devtype->nr_gpio) { /* Setup GPIO cotroller */ s->gpio.owner = THIS_MODULE; - s->gpio.dev = dev; + s->gpio.parent = dev; s->gpio.label = dev_name(dev); s->gpio.direction_input = sc16is7xx_gpio_direction_input; s->gpio.get = sc16is7xx_gpio_get; diff --git a/drivers/tty/serial/serial_core.c b/drivers/tty/serial/serial_core.c index def5199ca..b1f54ab18 100644 --- a/drivers/tty/serial/serial_core.c +++ b/drivers/tty/serial/serial_core.c @@ -110,7 +110,7 @@ static void uart_start(struct tty_struct *tty) spin_unlock_irqrestore(&port->lock, flags); } -static inline void +static void uart_update_mctrl(struct uart_port *port, unsigned int set, unsigned int clear) { unsigned long flags; @@ -1818,8 +1818,8 @@ uart_get_console(struct uart_port *ports, int nr, struct console *co) * @options: ptr for <options> field; NULL if not present (out) * * Decodes earlycon kernel command line parameters of the form - * earlycon=<name>,io|mmio|mmio32|mmio32be|mmio32native,<addr>,<options> - * console=<name>,io|mmio|mmio32|mmio32be|mmio32native,<addr>,<options> + * earlycon=<name>,io|mmio|mmio16|mmio32|mmio32be|mmio32native,<addr>,<options> + * console=<name>,io|mmio|mmio16|mmio32|mmio32be|mmio32native,<addr>,<options> * * The optional form * earlycon=<name>,0x<addr>,<options> @@ -1834,6 +1834,9 @@ int uart_parse_earlycon(char *p, unsigned char *iotype, unsigned long *addr, if (strncmp(p, "mmio,", 5) == 0) { *iotype = UPIO_MEM; p += 5; + } else if (strncmp(p, "mmio16,", 7) == 0) { + *iotype = UPIO_MEM16; + p += 7; } else if (strncmp(p, "mmio32,", 7) == 0) { *iotype = UPIO_MEM32; p += 7; @@ -2186,6 +2189,7 @@ uart_report_port(struct uart_driver *drv, struct uart_port *port) "I/O 0x%lx offset 0x%x", port->iobase, port->hub6); break; case UPIO_MEM: + case UPIO_MEM16: case UPIO_MEM32: case UPIO_MEM32BE: case UPIO_AU: @@ -2831,6 +2835,7 @@ int uart_match_port(struct uart_port *port1, struct uart_port *port2) return (port1->iobase == port2->iobase) && (port1->hub6 == port2->hub6); case UPIO_MEM: + case UPIO_MEM16: case UPIO_MEM32: case UPIO_MEM32BE: case UPIO_AU: diff --git a/drivers/tty/serial/serial_mctrl_gpio.c b/drivers/tty/serial/serial_mctrl_gpio.c index 3eb57eb53..226ad23b1 100644 --- a/drivers/tty/serial/serial_mctrl_gpio.c +++ b/drivers/tty/serial/serial_mctrl_gpio.c @@ -193,6 +193,7 @@ struct mctrl_gpios *mctrl_gpio_init(struct uart_port *port, unsigned int idx) return gpios; } +EXPORT_SYMBOL_GPL(mctrl_gpio_init); void mctrl_gpio_free(struct device *dev, struct mctrl_gpios *gpios) { @@ -247,3 +248,4 @@ void mctrl_gpio_disable_ms(struct mctrl_gpios *gpios) disable_irq(gpios->irq[i]); } } +EXPORT_SYMBOL_GPL(mctrl_gpio_disable_ms); diff --git a/drivers/tty/serial/sh-sci.c b/drivers/tty/serial/sh-sci.c index 51c7507b0..4646a9f53 100644 --- a/drivers/tty/serial/sh-sci.c +++ b/drivers/tty/serial/sh-sci.c @@ -2,6 +2,7 @@ * SuperH on-chip serial module support. (SCI with no FIFO / with FIFO) * * Copyright (C) 2002 - 2011 Paul Mundt + * Copyright (C) 2015 Glider bvba * Modified to support SH7720 SCIF. Markus Brunner, Mark Jonas (Jul 2007). * * based off of the old drivers/char/sh-sci.c by: @@ -38,7 +39,6 @@ #include <linux/major.h> #include <linux/module.h> #include <linux/mm.h> -#include <linux/notifier.h> #include <linux/of.h> #include <linux/platform_device.h> #include <linux/pm_runtime.h> @@ -76,6 +76,14 @@ enum { ((port)->irqs[SCIx_ERI_IRQ] && \ ((port)->irqs[SCIx_RXI_IRQ] < 0)) +enum SCI_CLKS { + SCI_FCK, /* Functional Clock */ + SCI_SCK, /* Optional External Clock */ + SCI_BRG_INT, /* Optional BRG Internal Clock Source */ + SCI_SCIF_CLK, /* Optional BRG External Clock Source */ + SCI_NUM_CLKS +}; + struct sci_port { struct uart_port port; @@ -92,10 +100,9 @@ struct sci_port { struct timer_list break_timer; int break_flag; - /* Interface clock */ - struct clk *iclk; - /* Function clock */ - struct clk *fclk; + /* Clocks */ + struct clk *clks[SCI_NUM_CLKS]; + unsigned long clk_rates[SCI_NUM_CLKS]; int irqs[SCIx_NR_IRQS]; char *irqstr[SCIx_NR_IRQS]; @@ -116,8 +123,6 @@ struct sci_port { struct timer_list rx_timer; unsigned int rx_timeout; #endif - - struct notifier_block freq_transition; }; #define SCI_NPORTS CONFIG_SERIAL_SH_SCI_NR_UARTS @@ -163,6 +168,8 @@ static const struct plat_sci_reg sci_regmap[SCIx_NR_REGTYPES][SCIx_NR_REGS] = { [HSSRR] = sci_reg_invalid, [SCPCR] = sci_reg_invalid, [SCPDR] = sci_reg_invalid, + [SCDL] = sci_reg_invalid, + [SCCKS] = sci_reg_invalid, }, /* @@ -185,6 +192,8 @@ static const struct plat_sci_reg sci_regmap[SCIx_NR_REGTYPES][SCIx_NR_REGS] = { [HSSRR] = sci_reg_invalid, [SCPCR] = sci_reg_invalid, [SCPDR] = sci_reg_invalid, + [SCDL] = sci_reg_invalid, + [SCCKS] = sci_reg_invalid, }, /* @@ -206,6 +215,8 @@ static const struct plat_sci_reg sci_regmap[SCIx_NR_REGTYPES][SCIx_NR_REGS] = { [HSSRR] = sci_reg_invalid, [SCPCR] = { 0x30, 16 }, [SCPDR] = { 0x34, 16 }, + [SCDL] = sci_reg_invalid, + [SCCKS] = sci_reg_invalid, }, /* @@ -227,6 +238,8 @@ static const struct plat_sci_reg sci_regmap[SCIx_NR_REGTYPES][SCIx_NR_REGS] = { [HSSRR] = sci_reg_invalid, [SCPCR] = { 0x30, 16 }, [SCPDR] = { 0x34, 16 }, + [SCDL] = sci_reg_invalid, + [SCCKS] = sci_reg_invalid, }, /* @@ -249,6 +262,8 @@ static const struct plat_sci_reg sci_regmap[SCIx_NR_REGTYPES][SCIx_NR_REGS] = { [HSSRR] = sci_reg_invalid, [SCPCR] = sci_reg_invalid, [SCPDR] = sci_reg_invalid, + [SCDL] = sci_reg_invalid, + [SCCKS] = sci_reg_invalid, }, /* @@ -270,6 +285,8 @@ static const struct plat_sci_reg sci_regmap[SCIx_NR_REGTYPES][SCIx_NR_REGS] = { [HSSRR] = sci_reg_invalid, [SCPCR] = sci_reg_invalid, [SCPDR] = sci_reg_invalid, + [SCDL] = sci_reg_invalid, + [SCCKS] = sci_reg_invalid, }, /* @@ -291,6 +308,32 @@ static const struct plat_sci_reg sci_regmap[SCIx_NR_REGTYPES][SCIx_NR_REGS] = { [HSSRR] = sci_reg_invalid, [SCPCR] = sci_reg_invalid, [SCPDR] = sci_reg_invalid, + [SCDL] = sci_reg_invalid, + [SCCKS] = sci_reg_invalid, + }, + + /* + * Common SCIF definitions for ports with a Baud Rate Generator for + * External Clock (BRG). + */ + [SCIx_SH4_SCIF_BRG_REGTYPE] = { + [SCSMR] = { 0x00, 16 }, + [SCBRR] = { 0x04, 8 }, + [SCSCR] = { 0x08, 16 }, + [SCxTDR] = { 0x0c, 8 }, + [SCxSR] = { 0x10, 16 }, + [SCxRDR] = { 0x14, 8 }, + [SCFCR] = { 0x18, 16 }, + [SCFDR] = { 0x1c, 16 }, + [SCTFDR] = sci_reg_invalid, + [SCRFDR] = sci_reg_invalid, + [SCSPTR] = { 0x20, 16 }, + [SCLSR] = { 0x24, 16 }, + [HSSRR] = sci_reg_invalid, + [SCPCR] = sci_reg_invalid, + [SCPDR] = sci_reg_invalid, + [SCDL] = { 0x30, 16 }, + [SCCKS] = { 0x34, 16 }, }, /* @@ -312,6 +355,8 @@ static const struct plat_sci_reg sci_regmap[SCIx_NR_REGTYPES][SCIx_NR_REGS] = { [HSSRR] = { 0x40, 16 }, [SCPCR] = sci_reg_invalid, [SCPDR] = sci_reg_invalid, + [SCDL] = { 0x30, 16 }, + [SCCKS] = { 0x34, 16 }, }, /* @@ -334,6 +379,8 @@ static const struct plat_sci_reg sci_regmap[SCIx_NR_REGTYPES][SCIx_NR_REGS] = { [HSSRR] = sci_reg_invalid, [SCPCR] = sci_reg_invalid, [SCPDR] = sci_reg_invalid, + [SCDL] = sci_reg_invalid, + [SCCKS] = sci_reg_invalid, }, /* @@ -356,6 +403,8 @@ static const struct plat_sci_reg sci_regmap[SCIx_NR_REGTYPES][SCIx_NR_REGS] = { [HSSRR] = sci_reg_invalid, [SCPCR] = sci_reg_invalid, [SCPDR] = sci_reg_invalid, + [SCDL] = sci_reg_invalid, + [SCCKS] = sci_reg_invalid, }, /* @@ -378,6 +427,8 @@ static const struct plat_sci_reg sci_regmap[SCIx_NR_REGTYPES][SCIx_NR_REGS] = { [HSSRR] = sci_reg_invalid, [SCPCR] = sci_reg_invalid, [SCPDR] = sci_reg_invalid, + [SCDL] = sci_reg_invalid, + [SCCKS] = sci_reg_invalid, }, }; @@ -452,18 +503,24 @@ static int sci_probe_regmap(struct plat_sci_port *cfg) static void sci_port_enable(struct sci_port *sci_port) { + unsigned int i; + if (!sci_port->port.dev) return; pm_runtime_get_sync(sci_port->port.dev); - clk_prepare_enable(sci_port->iclk); - sci_port->port.uartclk = clk_get_rate(sci_port->iclk); - clk_prepare_enable(sci_port->fclk); + for (i = 0; i < SCI_NUM_CLKS; i++) { + clk_prepare_enable(sci_port->clks[i]); + sci_port->clk_rates[i] = clk_get_rate(sci_port->clks[i]); + } + sci_port->port.uartclk = sci_port->clk_rates[SCI_FCK]; } static void sci_port_disable(struct sci_port *sci_port) { + unsigned int i; + if (!sci_port->port.dev) return; @@ -475,8 +532,8 @@ static void sci_port_disable(struct sci_port *sci_port) del_timer_sync(&sci_port->break_timer); sci_port->break_flag = 0; - clk_disable_unprepare(sci_port->fclk); - clk_disable_unprepare(sci_port->iclk); + for (i = SCI_NUM_CLKS; i-- > 0; ) + clk_disable_unprepare(sci_port->clks[i]); pm_runtime_put_sync(sci_port->port.dev); } @@ -1606,29 +1663,6 @@ static irqreturn_t sci_mpxed_interrupt(int irq, void *ptr) return ret; } -/* - * Here we define a transition notifier so that we can update all of our - * ports' baud rate when the peripheral clock changes. - */ -static int sci_notifier(struct notifier_block *self, - unsigned long phase, void *p) -{ - struct sci_port *sci_port; - unsigned long flags; - - sci_port = container_of(self, struct sci_port, freq_transition); - - if (phase == CPUFREQ_POSTCHANGE) { - struct uart_port *port = &sci_port->port; - - spin_lock_irqsave(&port->lock, flags); - port->uartclk = clk_get_rate(sci_port->iclk); - spin_unlock_irqrestore(&port->lock, flags); - } - - return NOTIFY_OK; -} - static const struct sci_irq_desc { const char *desc; irq_handler_t handler; @@ -1864,90 +1898,149 @@ static void sci_shutdown(struct uart_port *port) sci_free_irq(s); } -static unsigned int sci_scbrr_calc(struct sci_port *s, unsigned int bps, - unsigned long freq) +static int sci_sck_calc(struct sci_port *s, unsigned int bps, + unsigned int *srr) { - if (s->sampling_rate) - return DIV_ROUND_CLOSEST(freq, s->sampling_rate * bps) - 1; + unsigned long freq = s->clk_rates[SCI_SCK]; + unsigned int min_sr, max_sr, sr; + int err, min_err = INT_MAX; + + if (s->sampling_rate) { + /* SCI(F) has a fixed sampling rate */ + min_sr = max_sr = s->sampling_rate / 2; + } else { + /* HSCIF has a variable 1/(8..32) sampling rate */ + min_sr = 8; + max_sr = 32; + } + + for (sr = max_sr; sr >= min_sr; sr--) { + err = DIV_ROUND_CLOSEST(freq, sr) - bps; + if (abs(err) >= abs(min_err)) + continue; - /* Warn, but use a safe default */ - WARN_ON(1); + min_err = err; + *srr = sr - 1; - return ((freq + 16 * bps) / (32 * bps) - 1); + if (!err) + break; + } + + dev_dbg(s->port.dev, "SCK: %u%+d bps using SR %u\n", bps, min_err, + *srr + 1); + return min_err; } -/* calculate frame length from SMR */ -static int sci_baud_calc_frame_len(unsigned int smr_val) +static int sci_brg_calc(struct sci_port *s, unsigned int bps, + unsigned long freq, unsigned int *dlr, + unsigned int *srr) { - int len = 10; + unsigned int min_sr, max_sr, sr, dl; + int err, min_err = INT_MAX; - if (smr_val & SCSMR_CHR) - len--; - if (smr_val & SCSMR_PE) - len++; - if (smr_val & SCSMR_STOP) - len++; + if (s->sampling_rate) { + /* SCIF has a fixed sampling rate */ + min_sr = max_sr = s->sampling_rate / 2; + } else { + /* HSCIF has a variable 1/(8..32) sampling rate */ + min_sr = 8; + max_sr = 32; + } - return len; -} + for (sr = max_sr; sr >= min_sr; sr--) { + dl = DIV_ROUND_CLOSEST(freq, sr * bps); + dl = clamp(dl, 1U, 65535U); + + err = DIV_ROUND_CLOSEST(freq, sr * dl) - bps; + if (abs(err) >= abs(min_err)) + continue; + min_err = err; + *dlr = dl; + *srr = sr - 1; -/* calculate sample rate, BRR, and clock select for HSCIF */ -static void sci_baud_calc_hscif(unsigned int bps, unsigned long freq, - int *brr, unsigned int *srr, - unsigned int *cks, int frame_len) + if (!err) + break; + } + + dev_dbg(s->port.dev, "BRG: %u%+d bps using DL %u SR %u\n", bps, + min_err, *dlr, *srr + 1); + return min_err; +} + +/* calculate sample rate, BRR, and clock select */ +static int sci_scbrr_calc(struct sci_port *s, unsigned int bps, + unsigned int *brr, unsigned int *srr, + unsigned int *cks) { - int sr, c, br, err, recv_margin; - int min_err = 1000; /* 100% */ - int recv_max_margin = 0; + unsigned int min_sr, max_sr, shift, sr, br, prediv, scrate, c; + unsigned long freq = s->clk_rates[SCI_FCK]; + int err, min_err = INT_MAX; - /* Find the combination of sample rate and clock select with the - smallest deviation from the desired baud rate. */ - for (sr = 8; sr <= 32; sr++) { + if (s->sampling_rate) { + min_sr = max_sr = s->sampling_rate; + shift = 0; + } else { + /* HSCIF has a variable sample rate */ + min_sr = 8; + max_sr = 32; + shift = 1; + } + + /* + * Find the combination of sample rate and clock select with the + * smallest deviation from the desired baud rate. + * Prefer high sample rates to maximise the receive margin. + * + * M: Receive margin (%) + * N: Ratio of bit rate to clock (N = sampling rate) + * D: Clock duty (D = 0 to 1.0) + * L: Frame length (L = 9 to 12) + * F: Absolute value of clock frequency deviation + * + * M = |(0.5 - 1 / 2 * N) - ((L - 0.5) * F) - + * (|D - 0.5| / N * (1 + F))| + * NOTE: Usually, treat D for 0.5, F is 0 by this calculation. + */ + for (sr = max_sr; sr >= min_sr; sr--) { for (c = 0; c <= 3; c++) { /* integerized formulas from HSCIF documentation */ - br = DIV_ROUND_CLOSEST(freq, (sr * - (1 << (2 * c + 1)) * bps)) - 1; - br = clamp(br, 0, 255); - err = DIV_ROUND_CLOSEST(freq, ((br + 1) * bps * sr * - (1 << (2 * c + 1)) / 1000)) - - 1000; - /* Calc recv margin - * M: Receive margin (%) - * N: Ratio of bit rate to clock (N = sampling rate) - * D: Clock duty (D = 0 to 1.0) - * L: Frame length (L = 9 to 12) - * F: Absolute value of clock frequency deviation + prediv = sr * (1 << (2 * c + shift)); + + /* + * We need to calculate: * - * M = |(0.5 - 1 / 2 * N) - ((L - 0.5) * F) - - * (|D - 0.5| / N * (1 + F))| - * NOTE: Usually, treat D for 0.5, F is 0 by this - * calculation. + * br = freq / (prediv * bps) clamped to [1..256] + * err = freq / (br * prediv) - bps + * + * Watch out for overflow when calculating the desired + * sampling clock rate! */ - recv_margin = abs((500 - - DIV_ROUND_CLOSEST(1000, sr << 1)) / 10); - if (abs(min_err) > abs(err)) { - min_err = err; - recv_max_margin = recv_margin; - } else if ((min_err == err) && - (recv_margin > recv_max_margin)) - recv_max_margin = recv_margin; - else + if (bps > UINT_MAX / prediv) + break; + + scrate = prediv * bps; + br = DIV_ROUND_CLOSEST(freq, scrate); + br = clamp(br, 1U, 256U); + + err = DIV_ROUND_CLOSEST(freq, br * prediv) - bps; + if (abs(err) >= abs(min_err)) continue; - *brr = br; + min_err = err; + *brr = br - 1; *srr = sr - 1; *cks = c; + + if (!err) + goto found; } } - if (min_err == 1000) { - WARN_ON(1); - /* use defaults */ - *brr = 255; - *srr = 15; - *cks = 0; - } +found: + dev_dbg(s->port.dev, "BRR: %u%+d bps using N %u SR %u cks %u\n", bps, + min_err, *brr, *srr + 1, *cks); + return min_err; } static void sci_reset(struct uart_port *port) @@ -1969,11 +2062,14 @@ static void sci_reset(struct uart_port *port) static void sci_set_termios(struct uart_port *port, struct ktermios *termios, struct ktermios *old) { + unsigned int baud, smr_val = 0, scr_val = 0, i; + unsigned int brr = 255, cks = 0, srr = 15, dl = 0, sccks = 0; + unsigned int brr1 = 255, cks1 = 0, srr1 = 15, dl1 = 0; struct sci_port *s = to_sci_port(port); const struct plat_sci_reg *reg; - unsigned int baud, smr_val = 0, max_baud, cks = 0; - int t = -1; - unsigned int srr = 15; + int min_err = INT_MAX, err; + unsigned long max_freq = 0; + int best_clk = -1; if ((termios->c_cflag & CSIZE) == CS7) smr_val |= SCSMR_CHR; @@ -1992,41 +2088,123 @@ static void sci_set_termios(struct uart_port *port, struct ktermios *termios, * that the previous boot loader has enabled required clocks and * setup the baud rate generator hardware for us already. */ - max_baud = port->uartclk ? port->uartclk / 16 : 115200; - - baud = uart_get_baud_rate(port, termios, old, 0, max_baud); - if (likely(baud && port->uartclk)) { - if (s->cfg->type == PORT_HSCIF) { - int frame_len = sci_baud_calc_frame_len(smr_val); - sci_baud_calc_hscif(baud, port->uartclk, &t, &srr, - &cks, frame_len); - } else { - t = sci_scbrr_calc(s, baud, port->uartclk); - for (cks = 0; t >= 256 && cks <= 3; cks++) - t >>= 2; + if (!port->uartclk) { + baud = uart_get_baud_rate(port, termios, old, 0, 115200); + goto done; + } + + for (i = 0; i < SCI_NUM_CLKS; i++) + max_freq = max(max_freq, s->clk_rates[i]); + + baud = uart_get_baud_rate(port, termios, old, 0, + max_freq / max(s->sampling_rate, 8U)); + if (!baud) + goto done; + + /* + * There can be multiple sources for the sampling clock. Find the one + * that gives us the smallest deviation from the desired baud rate. + */ + + /* Optional Undivided External Clock */ + if (s->clk_rates[SCI_SCK] && port->type != PORT_SCIFA && + port->type != PORT_SCIFB) { + err = sci_sck_calc(s, baud, &srr1); + if (abs(err) < abs(min_err)) { + best_clk = SCI_SCK; + scr_val = SCSCR_CKE1; + sccks = SCCKS_CKS; + min_err = err; + srr = srr1; + if (!err) + goto done; } } + /* Optional BRG Frequency Divided External Clock */ + if (s->clk_rates[SCI_SCIF_CLK] && sci_getreg(port, SCDL)->size) { + err = sci_brg_calc(s, baud, s->clk_rates[SCI_SCIF_CLK], &dl1, + &srr1); + if (abs(err) < abs(min_err)) { + best_clk = SCI_SCIF_CLK; + scr_val = SCSCR_CKE1; + sccks = 0; + min_err = err; + dl = dl1; + srr = srr1; + if (!err) + goto done; + } + } + + /* Optional BRG Frequency Divided Internal Clock */ + if (s->clk_rates[SCI_BRG_INT] && sci_getreg(port, SCDL)->size) { + err = sci_brg_calc(s, baud, s->clk_rates[SCI_BRG_INT], &dl1, + &srr1); + if (abs(err) < abs(min_err)) { + best_clk = SCI_BRG_INT; + scr_val = SCSCR_CKE1; + sccks = SCCKS_XIN; + min_err = err; + dl = dl1; + srr = srr1; + if (!min_err) + goto done; + } + } + + /* Divided Functional Clock using standard Bit Rate Register */ + err = sci_scbrr_calc(s, baud, &brr1, &srr1, &cks1); + if (abs(err) < abs(min_err)) { + best_clk = SCI_FCK; + scr_val = 0; + min_err = err; + brr = brr1; + srr = srr1; + cks = cks1; + } + +done: + if (best_clk >= 0) + dev_dbg(port->dev, "Using clk %pC for %u%+d bps\n", + s->clks[best_clk], baud, min_err); + sci_port_enable(s); - sci_reset(port); + /* + * Program the optional External Baud Rate Generator (BRG) first. + * It controls the mux to select (H)SCK or frequency divided clock. + */ + if (best_clk >= 0 && sci_getreg(port, SCCKS)->size) { + serial_port_out(port, SCDL, dl); + serial_port_out(port, SCCKS, sccks); + } - smr_val |= serial_port_in(port, SCSMR) & SCSMR_CKS; + sci_reset(port); uart_update_timeout(port, termios->c_cflag, baud); - dev_dbg(port->dev, "%s: SMR %x, cks %x, t %x, SCSCR %x\n", - __func__, smr_val, cks, t, s->cfg->scscr); - - if (t >= 0) { - serial_port_out(port, SCSMR, (smr_val & ~SCSMR_CKS) | cks); - serial_port_out(port, SCBRR, t); - reg = sci_getreg(port, HSSRR); - if (reg->size) + if (best_clk >= 0) { + smr_val |= cks; + dev_dbg(port->dev, + "SCR 0x%x SMR 0x%x BRR %u CKS 0x%x DL %u SRR %u\n", + scr_val, smr_val, brr, sccks, dl, srr); + serial_port_out(port, SCSCR, scr_val); + serial_port_out(port, SCSMR, smr_val); + serial_port_out(port, SCBRR, brr); + if (sci_getreg(port, HSSRR)->size) serial_port_out(port, HSSRR, srr | HSCIF_SRE); - udelay((1000000+(baud-1)) / baud); /* Wait one bit interval */ - } else + + /* Wait one bit interval */ + udelay((1000000 + (baud - 1)) / baud); + } else { + /* Don't touch the bit rate configuration */ + scr_val = s->cfg->scscr & (SCSCR_CKE1 | SCSCR_CKE0); + smr_val |= serial_port_in(port, SCSMR) & SCSMR_CKS; + dev_dbg(port->dev, "SCR 0x%x SMR 0x%x\n", scr_val, smr_val); + serial_port_out(port, SCSCR, scr_val); serial_port_out(port, SCSMR, smr_val); + } sci_init_pins(port, termios->c_cflag); @@ -2051,7 +2229,9 @@ static void sci_set_termios(struct uart_port *port, struct ktermios *termios, serial_port_out(port, SCFCR, ctrl); } - serial_port_out(port, SCSCR, s->cfg->scscr); + scr_val |= s->cfg->scscr & ~(SCSCR_CKE1 | SCSCR_CKE0); + dev_dbg(port->dev, "SCSCR 0x%x\n", scr_val); + serial_port_out(port, SCSCR, scr_val); #ifdef CONFIG_SERIAL_SH_SCI_DMA /* @@ -2241,6 +2421,63 @@ static struct uart_ops sci_uart_ops = { #endif }; +static int sci_init_clocks(struct sci_port *sci_port, struct device *dev) +{ + const char *clk_names[] = { + [SCI_FCK] = "fck", + [SCI_SCK] = "sck", + [SCI_BRG_INT] = "brg_int", + [SCI_SCIF_CLK] = "scif_clk", + }; + struct clk *clk; + unsigned int i; + + if (sci_port->cfg->type == PORT_HSCIF) + clk_names[SCI_SCK] = "hsck"; + + for (i = 0; i < SCI_NUM_CLKS; i++) { + clk = devm_clk_get(dev, clk_names[i]); + if (PTR_ERR(clk) == -EPROBE_DEFER) + return -EPROBE_DEFER; + + if (IS_ERR(clk) && i == SCI_FCK) { + /* + * "fck" used to be called "sci_ick", and we need to + * maintain DT backward compatibility. + */ + clk = devm_clk_get(dev, "sci_ick"); + if (PTR_ERR(clk) == -EPROBE_DEFER) + return -EPROBE_DEFER; + + if (!IS_ERR(clk)) + goto found; + + /* + * Not all SH platforms declare a clock lookup entry + * for SCI devices, in which case we need to get the + * global "peripheral_clk" clock. + */ + clk = devm_clk_get(dev, "peripheral_clk"); + if (!IS_ERR(clk)) + goto found; + + dev_err(dev, "failed to get %s (%ld)\n", clk_names[i], + PTR_ERR(clk)); + return PTR_ERR(clk); + } + +found: + if (IS_ERR(clk)) + dev_dbg(dev, "failed to get %s (%ld)\n", clk_names[i], + PTR_ERR(clk)); + else + dev_dbg(dev, "clk %s is %pC rate %pCr\n", clk_names[i], + clk, clk); + sci_port->clks[i] = IS_ERR(clk) ? NULL : clk; + } + return 0; +} + static int sci_init_single(struct platform_device *dev, struct sci_port *sci_port, unsigned int index, struct plat_sci_port *p, bool early) @@ -2333,22 +2570,9 @@ static int sci_init_single(struct platform_device *dev, sci_port->sampling_rate = p->sampling_rate; if (!early) { - sci_port->iclk = clk_get(&dev->dev, "sci_ick"); - if (IS_ERR(sci_port->iclk)) { - sci_port->iclk = clk_get(&dev->dev, "peripheral_clk"); - if (IS_ERR(sci_port->iclk)) { - dev_err(&dev->dev, "can't get iclk\n"); - return PTR_ERR(sci_port->iclk); - } - } - - /* - * The function clock is optional, ignore it if we can't - * find it. - */ - sci_port->fclk = clk_get(&dev->dev, "sci_fck"); - if (IS_ERR(sci_port->fclk)) - sci_port->fclk = NULL; + ret = sci_init_clocks(sci_port, &dev->dev); + if (ret < 0) + return ret; port->dev = &dev->dev; @@ -2405,9 +2629,6 @@ static int sci_init_single(struct platform_device *dev, static void sci_cleanup_single(struct sci_port *port) { - clk_put(port->iclk); - clk_put(port->fclk); - pm_runtime_disable(port->port.dev); } @@ -2426,7 +2647,7 @@ static void serial_console_write(struct console *co, const char *s, { struct sci_port *sci_port = &sci_ports[co->index]; struct uart_port *port = &sci_port->port; - unsigned short bits, ctrl; + unsigned short bits, ctrl, ctrl_temp; unsigned long flags; int locked = 1; @@ -2438,9 +2659,11 @@ static void serial_console_write(struct console *co, const char *s, else spin_lock(&port->lock); - /* first save the SCSCR then disable the interrupts */ + /* first save SCSCR then disable interrupts, keep clock source */ ctrl = serial_port_in(port, SCSCR); - serial_port_out(port, SCSCR, sci_port->cfg->scscr); + ctrl_temp = (sci_port->cfg->scscr & ~(SCSCR_CKE1 | SCSCR_CKE0)) | + (ctrl & (SCSCR_CKE1 | SCSCR_CKE0)); + serial_port_out(port, SCSCR, ctrl_temp); uart_console_write(port, s, count, serial_console_putchar); @@ -2559,9 +2782,6 @@ static int sci_remove(struct platform_device *dev) { struct sci_port *port = platform_get_drvdata(dev); - cpufreq_unregister_notifier(&port->freq_transition, - CPUFREQ_TRANSITION_NOTIFIER); - uart_remove_one_port(&sci_uart_driver, &port->port); sci_cleanup_single(port); @@ -2569,42 +2789,44 @@ static int sci_remove(struct platform_device *dev) return 0; } -struct sci_port_info { - unsigned int type; - unsigned int regtype; -}; + +#define SCI_OF_DATA(type, regtype) (void *)((type) << 16 | (regtype)) +#define SCI_OF_TYPE(data) ((unsigned long)(data) >> 16) +#define SCI_OF_REGTYPE(data) ((unsigned long)(data) & 0xffff) static const struct of_device_id of_sci_match[] = { + /* SoC-specific types */ + { + .compatible = "renesas,scif-r7s72100", + .data = SCI_OF_DATA(PORT_SCIF, SCIx_SH2_SCIF_FIFODATA_REGTYPE), + }, + /* Family-specific types */ + { + .compatible = "renesas,rcar-gen1-scif", + .data = SCI_OF_DATA(PORT_SCIF, SCIx_SH4_SCIF_BRG_REGTYPE), + }, { + .compatible = "renesas,rcar-gen2-scif", + .data = SCI_OF_DATA(PORT_SCIF, SCIx_SH4_SCIF_BRG_REGTYPE), + }, { + .compatible = "renesas,rcar-gen3-scif", + .data = SCI_OF_DATA(PORT_SCIF, SCIx_SH4_SCIF_BRG_REGTYPE), + }, + /* Generic types */ { .compatible = "renesas,scif", - .data = &(const struct sci_port_info) { - .type = PORT_SCIF, - .regtype = SCIx_SH4_SCIF_REGTYPE, - }, + .data = SCI_OF_DATA(PORT_SCIF, SCIx_SH4_SCIF_REGTYPE), }, { .compatible = "renesas,scifa", - .data = &(const struct sci_port_info) { - .type = PORT_SCIFA, - .regtype = SCIx_SCIFA_REGTYPE, - }, + .data = SCI_OF_DATA(PORT_SCIFA, SCIx_SCIFA_REGTYPE), }, { .compatible = "renesas,scifb", - .data = &(const struct sci_port_info) { - .type = PORT_SCIFB, - .regtype = SCIx_SCIFB_REGTYPE, - }, + .data = SCI_OF_DATA(PORT_SCIFB, SCIx_SCIFB_REGTYPE), }, { .compatible = "renesas,hscif", - .data = &(const struct sci_port_info) { - .type = PORT_HSCIF, - .regtype = SCIx_HSCIF_REGTYPE, - }, + .data = SCI_OF_DATA(PORT_HSCIF, SCIx_HSCIF_REGTYPE), }, { .compatible = "renesas,sci", - .data = &(const struct sci_port_info) { - .type = PORT_SCI, - .regtype = SCIx_SCI_REGTYPE, - }, + .data = SCI_OF_DATA(PORT_SCI, SCIx_SCI_REGTYPE), }, { /* Terminator */ }, @@ -2616,24 +2838,21 @@ sci_parse_dt(struct platform_device *pdev, unsigned int *dev_id) { struct device_node *np = pdev->dev.of_node; const struct of_device_id *match; - const struct sci_port_info *info; struct plat_sci_port *p; int id; if (!IS_ENABLED(CONFIG_OF) || !np) return NULL; - match = of_match_node(of_sci_match, pdev->dev.of_node); + match = of_match_node(of_sci_match, np); if (!match) return NULL; - info = match->data; - p = devm_kzalloc(&pdev->dev, sizeof(struct plat_sci_port), GFP_KERNEL); if (!p) return NULL; - /* Get the line number for the aliases node. */ + /* Get the line number from the aliases node. */ id = of_alias_get_id(np, "serial"); if (id < 0) { dev_err(&pdev->dev, "failed to get alias id (%d)\n", id); @@ -2643,8 +2862,8 @@ sci_parse_dt(struct platform_device *pdev, unsigned int *dev_id) *dev_id = id; p->flags = UPF_IOREMAP | UPF_BOOT_AUTOCONF; - p->type = info->type; - p->regtype = info->regtype; + p->type = SCI_OF_TYPE(match->data); + p->regtype = SCI_OF_REGTYPE(match->data); p->scscr = SCSCR_RE | SCSCR_TE; return p; @@ -2714,16 +2933,6 @@ static int sci_probe(struct platform_device *dev) if (ret) return ret; - sp->freq_transition.notifier_call = sci_notifier; - - ret = cpufreq_register_notifier(&sp->freq_transition, - CPUFREQ_TRANSITION_NOTIFIER); - if (unlikely(ret < 0)) { - uart_remove_one_port(&sci_uart_driver, &sp->port); - sci_cleanup_single(sp); - return ret; - } - #ifdef CONFIG_SH_STANDARD_BIOS sh_bios_gdb_detach(); #endif diff --git a/drivers/tty/serial/sh-sci.h b/drivers/tty/serial/sh-sci.h index bf69bbdcc..fb1760250 100644 --- a/drivers/tty/serial/sh-sci.h +++ b/drivers/tty/serial/sh-sci.h @@ -27,6 +27,8 @@ enum { HSSRR, /* Sampling Rate Register */ SCPCR, /* Serial Port Control Register */ SCPDR, /* Serial Port Data Register */ + SCDL, /* BRG Frequency Division Register */ + SCCKS, /* BRG Clock Select Register */ SCIx_NR_REGS, }; @@ -109,6 +111,14 @@ enum { #define SCPDR_RTSD BIT(4) /* Serial Port RTS Output Pin Data */ #define SCPDR_CTSD BIT(3) /* Serial Port CTS Input Pin Data */ +/* + * BRG Clock Select Register (Some SCIF and HSCIF) + * The Baud Rate Generator for external clock can provide a clock source for + * the sampling clock. It outputs either its frequency divided clock, or the + * (undivided) (H)SCK external clock. + */ +#define SCCKS_CKS BIT(15) /* Select (H)SCK (1) or divided SC_CLK (0) */ +#define SCCKS_XIN BIT(14) /* SC_CLK uses bus clock (1) or SCIF_CLK (0) */ #define SCxSR_TEND(port) (((port)->type == PORT_SCI) ? SCI_TEND : SCIF_TEND) #define SCxSR_RDxF(port) (((port)->type == PORT_SCI) ? SCI_RDRF : SCIF_RDF) diff --git a/drivers/tty/serial/sprd_serial.c b/drivers/tty/serial/sprd_serial.c index 9dbae01d4..ef26c4a60 100644 --- a/drivers/tty/serial/sprd_serial.c +++ b/drivers/tty/serial/sprd_serial.c @@ -517,7 +517,7 @@ static struct uart_ops serial_sprd_ops = { }; #ifdef CONFIG_SERIAL_SPRD_CONSOLE -static inline void wait_for_xmitr(struct uart_port *port) +static void wait_for_xmitr(struct uart_port *port) { unsigned int status, tmout = 10000; diff --git a/drivers/tty/serial/sunsu.c b/drivers/tty/serial/sunsu.c index e124d2e88..9ad98eaa3 100644 --- a/drivers/tty/serial/sunsu.c +++ b/drivers/tty/serial/sunsu.c @@ -1262,7 +1262,7 @@ static int sunsu_kbd_ms_init(struct uart_sunsu_port *up) /* * Wait for transmitter & holding register to empty */ -static __inline__ void wait_for_xmitr(struct uart_sunsu_port *up) +static void wait_for_xmitr(struct uart_sunsu_port *up) { unsigned int status, tmout = 10000; diff --git a/drivers/tty/serial/ucc_uart.c b/drivers/tty/serial/ucc_uart.c index 3475e0e4c..5414b25bc 100644 --- a/drivers/tty/serial/ucc_uart.c +++ b/drivers/tty/serial/ucc_uart.c @@ -31,7 +31,7 @@ #include <linux/dma-mapping.h> #include <linux/fs_uart_pd.h> -#include <asm/ucc_slow.h> +#include <soc/fsl/qe/ucc_slow.h> #include <linux/firmware.h> #include <asm/reg.h> diff --git a/drivers/tty/serial/vt8500_serial.c b/drivers/tty/serial/vt8500_serial.c index 4079ec56f..b384060e3 100644 --- a/drivers/tty/serial/vt8500_serial.c +++ b/drivers/tty/serial/vt8500_serial.c @@ -485,7 +485,7 @@ static struct uart_driver vt8500_uart_driver; #ifdef CONFIG_SERIAL_VT8500_CONSOLE -static inline void wait_for_xmitr(struct uart_port *port) +static void wait_for_xmitr(struct uart_port *port) { unsigned int status, tmout = 10000; |