4 files changed, 41 insertions, 15 deletions

diff --git a/drivers/tty/n_tty.c b/drivers/tty/n_tty.c
index ee8bfacf2..afc1879f6 100644
--- a/drivers/tty/n_tty.c
+++ b/drivers/tty/n_tty.c
@@ -343,8 +343,7 @@ static void n_tty_packet_mode_flush(struct tty_struct *tty)
 		spin_lock_irqsave(&tty->ctrl_lock, flags);
 		tty->ctrl_status |= TIOCPKT_FLUSHREAD;
 		spin_unlock_irqrestore(&tty->ctrl_lock, flags);
-		if (waitqueue_active(&tty->link->read_wait))
-			wake_up_interruptible(&tty->link->read_wait);
+		wake_up_interruptible(&tty->link->read_wait);
 	}
 }
 
@@ -1382,8 +1381,7 @@ handle_newline:
 			put_tty_queue(c, ldata);
 			smp_store_release(&ldata->canon_head, ldata->read_head);
 			kill_fasync(&tty->fasync, SIGIO, POLL_IN);
-			if (waitqueue_active(&tty->read_wait))
-				wake_up_interruptible_poll(&tty->read_wait, POLLIN);
+			wake_up_interruptible_poll(&tty->read_wait, POLLIN);
 			return 0;
 		}
 	}
@@ -1667,8 +1665,7 @@ static void __receive_buf(struct tty_struct *tty, const unsigned char *cp,
 
 	if ((read_cnt(ldata) >= ldata->minimum_to_wake) || L_EXTPROC(tty)) {
 		kill_fasync(&tty->fasync, SIGIO, POLL_IN);
-		if (waitqueue_active(&tty->read_wait))
-			wake_up_interruptible_poll(&tty->read_wait, POLLIN);
+		wake_up_interruptible_poll(&tty->read_wait, POLLIN);
 	}
 }
 
@@ -1887,10 +1884,8 @@ static void n_tty_set_termios(struct tty_struct *tty, struct ktermios *old)
 	}
 
 	/* The termios change make the tty ready for I/O */
-	if (waitqueue_active(&tty->write_wait))
-		wake_up_interruptible(&tty->write_wait);
-	if (waitqueue_active(&tty->read_wait))
-		wake_up_interruptible(&tty->read_wait);
+	wake_up_interruptible(&tty->write_wait);
+	wake_up_interruptible(&tty->read_wait);
 }
 
 /**
diff --git a/drivers/tty/serial/8250/8250_core.c b/drivers/tty/serial/8250/8250_core.c
index 2736eb262..a3a83164b 100644
--- a/drivers/tty/serial/8250/8250_core.c
+++ b/drivers/tty/serial/8250/8250_core.c
@@ -326,6 +326,14 @@ configured less than Maximum supported fifo bytes */
 				  UART_FCR7_64BYTE,
 		.flags		= UART_CAP_FIFO,
 	},
+	[PORT_RT2880] = {
+		.name		= "Palmchip BK-3103",
+		.fifo_size	= 16,
+		.tx_loadsz	= 16,
+		.fcr		= UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10,
+		.rxtrig_bytes	= {1, 4, 8, 14},
+		.flags		= UART_CAP_FIFO,
+	},
 };
 
 /* Uart divisor latch read */
diff --git a/drivers/tty/serial/atmel_serial.c b/drivers/tty/serial/atmel_serial.c
index 2a8f52815..40326b342 100644
--- a/drivers/tty/serial/atmel_serial.c
+++ b/drivers/tty/serial/atmel_serial.c
@@ -2641,7 +2641,7 @@ static int atmel_serial_probe(struct platform_device *pdev)
 	ret = atmel_init_gpios(port, &pdev->dev);
 	if (ret < 0) {
 		dev_err(&pdev->dev, "Failed to initialize GPIOs.");
-		goto err;
+		goto err_clear_bit;
 	}
 
 	ret = atmel_init_port(port, pdev);
diff --git a/drivers/tty/tty_io.c b/drivers/tty/tty_io.c
index 57fc6ee12..774df354a 100644
--- a/drivers/tty/tty_io.c
+++ b/drivers/tty/tty_io.c
@@ -2136,8 +2136,24 @@ retry_open:
 	if (!noctty &&
 	    current->signal->leader &&
 	    !current->signal->tty &&
-	    tty->session == NULL)
-		__proc_set_tty(tty);
+	    tty->session == NULL) {
+		/*
+		 * Don't let a process that only has write access to the tty
+		 * obtain the privileges associated with having a tty as
+		 * controlling terminal (being able to reopen it with full
+		 * access through /dev/tty, being able to perform pushback).
+		 * Many distributions set the group of all ttys to "tty" and
+		 * grant write-only access to all terminals for setgid tty
+		 * binaries, which should not imply full privileges on all ttys.
+		 *
+		 * This could theoretically break old code that performs open()
+		 * on a write-only file descriptor. In that case, it might be
+		 * necessary to also permit this if
+		 * inode_permission(inode, MAY_READ) == 0.
+		 */
+		if (filp->f_mode & FMODE_READ)
+			__proc_set_tty(tty);
+	}
 	spin_unlock_irq(&current->sighand->siglock);
 	read_unlock(&tasklist_lock);
 	tty_unlock(tty);
@@ -2426,7 +2442,7 @@ static int fionbio(struct file *file, int __user *p)
  *		Takes ->siglock() when updating signal->tty
  */
 
-static int tiocsctty(struct tty_struct *tty, int arg)
+static int tiocsctty(struct tty_struct *tty, struct file *file, int arg)
 {
 	int ret = 0;
 
@@ -2460,6 +2476,13 @@ static int tiocsctty(struct tty_struct *tty, int arg)
 			goto unlock;
 		}
 	}
+
+	/* See the comment in tty_open(). */
+	if ((file->f_mode & FMODE_READ) == 0 && !capable(CAP_SYS_ADMIN)) {
+		ret = -EPERM;
+		goto unlock;
+	}
+
 	proc_set_tty(tty);
 unlock:
 	read_unlock(&tasklist_lock);
@@ -2852,7 +2875,7 @@ long tty_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
 		no_tty();
 		return 0;
 	case TIOCSCTTY:
-		return tiocsctty(tty, arg);
+		return tiocsctty(tty, file, arg);
 	case TIOCGPGRP:
 		return tiocgpgrp(tty, real_tty, p);
 	case TIOCSPGRP: