summaryrefslogtreecommitdiff
path: root/drivers/tty
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/tty')
-rw-r--r--drivers/tty/serial/8250/8250_omap.c14
-rw-r--r--drivers/tty/serial/8250/8250_pci.c82
-rw-r--r--drivers/tty/serial/8250/8250_pnp.c11
-rw-r--r--drivers/tty/serial/8250/8250_uniphier.c1
-rw-r--r--drivers/tty/serial/men_z135_uart.c9
-rw-r--r--drivers/tty/serial/samsung.c47
-rw-r--r--drivers/tty/serial/samsung.h1
7 files changed, 122 insertions, 43 deletions
diff --git a/drivers/tty/serial/8250/8250_omap.c b/drivers/tty/serial/8250/8250_omap.c
index d75a66c72..b470df122 100644
--- a/drivers/tty/serial/8250/8250_omap.c
+++ b/drivers/tty/serial/8250/8250_omap.c
@@ -100,6 +100,7 @@ struct omap8250_priv {
struct work_struct qos_work;
struct uart_8250_dma omap8250_dma;
spinlock_t rx_dma_lock;
+ bool rx_dma_broken;
};
static u32 uart_read(struct uart_8250_port *up, u32 reg)
@@ -754,6 +755,7 @@ static void omap_8250_rx_dma_flush(struct uart_8250_port *p)
struct omap8250_priv *priv = p->port.private_data;
struct uart_8250_dma *dma = p->dma;
unsigned long flags;
+ int ret;
spin_lock_irqsave(&priv->rx_dma_lock, flags);
@@ -762,7 +764,9 @@ static void omap_8250_rx_dma_flush(struct uart_8250_port *p)
return;
}
- dmaengine_pause(dma->rxchan);
+ ret = dmaengine_pause(dma->rxchan);
+ if (WARN_ON_ONCE(ret))
+ priv->rx_dma_broken = true;
spin_unlock_irqrestore(&priv->rx_dma_lock, flags);
@@ -806,6 +810,9 @@ static int omap_8250_rx_dma(struct uart_8250_port *p, unsigned int iir)
break;
}
+ if (priv->rx_dma_broken)
+ return -EINVAL;
+
spin_lock_irqsave(&priv->rx_dma_lock, flags);
if (dma->rx_running)
@@ -1180,6 +1187,11 @@ static int omap8250_probe(struct platform_device *pdev)
if (of_machine_is_compatible("ti,am33xx"))
priv->habit |= OMAP_DMA_TX_KICK;
+ /*
+ * pause is currently not supported atleast on omap-sdma
+ * and edma on most earlier kernels.
+ */
+ priv->rx_dma_broken = true;
}
}
#endif
diff --git a/drivers/tty/serial/8250/8250_pci.c b/drivers/tty/serial/8250/8250_pci.c
index e55f18b93..46ddce479 100644
--- a/drivers/tty/serial/8250/8250_pci.c
+++ b/drivers/tty/serial/8250/8250_pci.c
@@ -2017,6 +2017,12 @@ pci_wch_ch38x_setup(struct serial_private *priv,
#define PCIE_DEVICE_ID_WCH_CH382_2S1P 0x3250
#define PCIE_DEVICE_ID_WCH_CH384_4S 0x3470
+#define PCI_VENDOR_ID_PERICOM 0x12D8
+#define PCI_DEVICE_ID_PERICOM_PI7C9X7951 0x7951
+#define PCI_DEVICE_ID_PERICOM_PI7C9X7952 0x7952
+#define PCI_DEVICE_ID_PERICOM_PI7C9X7954 0x7954
+#define PCI_DEVICE_ID_PERICOM_PI7C9X7958 0x7958
+
/* Unknown vendors/cards - this should not be in linux/pci_ids.h */
#define PCI_SUBDEVICE_ID_UNKNOWN_0x1584 0x1584
#define PCI_SUBDEVICE_ID_UNKNOWN_0x1588 0x1588
@@ -2331,27 +2337,12 @@ static struct pci_serial_quirk pci_serial_quirks[] __refdata = {
* Pericom
*/
{
- .vendor = 0x12d8,
- .device = 0x7952,
- .subvendor = PCI_ANY_ID,
- .subdevice = PCI_ANY_ID,
- .setup = pci_pericom_setup,
- },
- {
- .vendor = 0x12d8,
- .device = 0x7954,
- .subvendor = PCI_ANY_ID,
- .subdevice = PCI_ANY_ID,
- .setup = pci_pericom_setup,
- },
- {
- .vendor = 0x12d8,
- .device = 0x7958,
- .subvendor = PCI_ANY_ID,
- .subdevice = PCI_ANY_ID,
- .setup = pci_pericom_setup,
+ .vendor = PCI_VENDOR_ID_PERICOM,
+ .device = PCI_ANY_ID,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .setup = pci_pericom_setup,
},
-
/*
* PLX
*/
@@ -3056,6 +3047,10 @@ enum pci_board_num_t {
pbn_fintek_8,
pbn_fintek_12,
pbn_wch384_4,
+ pbn_pericom_PI7C9X7951,
+ pbn_pericom_PI7C9X7952,
+ pbn_pericom_PI7C9X7954,
+ pbn_pericom_PI7C9X7958,
};
/*
@@ -3881,7 +3876,6 @@ static struct pciserial_board pci_boards[] = {
.base_baud = 115200,
.first_offset = 0x40,
},
-
[pbn_wch384_4] = {
.flags = FL_BASE0,
.num_ports = 4,
@@ -3889,6 +3883,33 @@ static struct pciserial_board pci_boards[] = {
.uart_offset = 8,
.first_offset = 0xC0,
},
+ /*
+ * Pericom PI7C9X795[1248] Uno/Dual/Quad/Octal UART
+ */
+ [pbn_pericom_PI7C9X7951] = {
+ .flags = FL_BASE0,
+ .num_ports = 1,
+ .base_baud = 921600,
+ .uart_offset = 0x8,
+ },
+ [pbn_pericom_PI7C9X7952] = {
+ .flags = FL_BASE0,
+ .num_ports = 2,
+ .base_baud = 921600,
+ .uart_offset = 0x8,
+ },
+ [pbn_pericom_PI7C9X7954] = {
+ .flags = FL_BASE0,
+ .num_ports = 4,
+ .base_baud = 921600,
+ .uart_offset = 0x8,
+ },
+ [pbn_pericom_PI7C9X7958] = {
+ .flags = FL_BASE0,
+ .num_ports = 8,
+ .base_baud = 921600,
+ .uart_offset = 0x8,
+ },
};
static const struct pci_device_id blacklist[] = {
@@ -5154,6 +5175,25 @@ static struct pci_device_id serial_pci_tbl[] = {
0,
0, pbn_exar_XR17V8358 },
/*
+ * Pericom PI7C9X795[1248] Uno/Dual/Quad/Octal UART
+ */
+ { PCI_VENDOR_ID_PERICOM, PCI_DEVICE_ID_PERICOM_PI7C9X7951,
+ PCI_ANY_ID, PCI_ANY_ID,
+ 0,
+ 0, pbn_pericom_PI7C9X7951 },
+ { PCI_VENDOR_ID_PERICOM, PCI_DEVICE_ID_PERICOM_PI7C9X7952,
+ PCI_ANY_ID, PCI_ANY_ID,
+ 0,
+ 0, pbn_pericom_PI7C9X7952 },
+ { PCI_VENDOR_ID_PERICOM, PCI_DEVICE_ID_PERICOM_PI7C9X7954,
+ PCI_ANY_ID, PCI_ANY_ID,
+ 0,
+ 0, pbn_pericom_PI7C9X7954 },
+ { PCI_VENDOR_ID_PERICOM, PCI_DEVICE_ID_PERICOM_PI7C9X7958,
+ PCI_ANY_ID, PCI_ANY_ID,
+ 0,
+ 0, pbn_pericom_PI7C9X7958 },
+ /*
* Topic TP560 Data/Fax/Voice 56k modem (reported by Evan Clarke)
*/
{ PCI_VENDOR_ID_TOPIC, PCI_DEVICE_ID_TOPIC_TP560,
diff --git a/drivers/tty/serial/8250/8250_pnp.c b/drivers/tty/serial/8250/8250_pnp.c
index 50a09cd76..658b392d1 100644
--- a/drivers/tty/serial/8250/8250_pnp.c
+++ b/drivers/tty/serial/8250/8250_pnp.c
@@ -41,6 +41,12 @@ static const struct pnp_device_id pnp_dev_table[] = {
{ "AEI1240", 0 },
/* Rockwell 56K ACF II Fax+Data+Voice Modem */
{ "AKY1021", 0 /*SPCI_FL_NO_SHIRQ*/ },
+ /*
+ * ALi Fast Infrared Controller
+ * Native driver (ali-ircc) is broken so at least
+ * it can be used with irtty-sir.
+ */
+ { "ALI5123", 0 },
/* AZT3005 PnP SOUND DEVICE */
{ "AZT4001", 0 },
/* Best Data Products Inc. Smart One 336F PnP Modem */
@@ -364,6 +370,11 @@ static const struct pnp_device_id pnp_dev_table[] = {
/* Winbond CIR port, should not be probed. We should keep track
of it to prevent the legacy serial driver from probing it */
{ "WEC1022", CIR_PORT },
+ /*
+ * SMSC IrCC SIR/FIR port, should not be probed by serial driver
+ * as well so its own driver can bind to it.
+ */
+ { "SMCF010", CIR_PORT },
{ "", 0 }
};
diff --git a/drivers/tty/serial/8250/8250_uniphier.c b/drivers/tty/serial/8250/8250_uniphier.c
index 7d79425c2..d11621e2c 100644
--- a/drivers/tty/serial/8250/8250_uniphier.c
+++ b/drivers/tty/serial/8250/8250_uniphier.c
@@ -218,6 +218,7 @@ static int uniphier_uart_probe(struct platform_device *pdev)
ret = serial8250_register_8250_port(&up);
if (ret < 0) {
dev_err(dev, "failed to register 8250 port\n");
+ clk_disable_unprepare(priv->clk);
return ret;
}
diff --git a/drivers/tty/serial/men_z135_uart.c b/drivers/tty/serial/men_z135_uart.c
index 35c55505b..5a41b8fbb 100644
--- a/drivers/tty/serial/men_z135_uart.c
+++ b/drivers/tty/serial/men_z135_uart.c
@@ -392,7 +392,6 @@ static irqreturn_t men_z135_intr(int irq, void *data)
struct men_z135_port *uart = (struct men_z135_port *)data;
struct uart_port *port = &uart->port;
bool handled = false;
- unsigned long flags;
int irq_id;
uart->stat_reg = ioread32(port->membase + MEN_Z135_STAT_REG);
@@ -401,7 +400,7 @@ static irqreturn_t men_z135_intr(int irq, void *data)
if (!irq_id)
goto out;
- spin_lock_irqsave(&port->lock, flags);
+ spin_lock(&port->lock);
/* It's save to write to IIR[7:6] RXC[9:8] */
iowrite8(irq_id, port->membase + MEN_Z135_STAT_REG);
@@ -427,7 +426,7 @@ static irqreturn_t men_z135_intr(int irq, void *data)
handled = true;
}
- spin_unlock_irqrestore(&port->lock, flags);
+ spin_unlock(&port->lock);
out:
return IRQ_RETVAL(handled);
}
@@ -717,7 +716,7 @@ static void men_z135_set_termios(struct uart_port *port,
baud = uart_get_baud_rate(port, termios, old, 0, uart_freq / 16);
- spin_lock(&port->lock);
+ spin_lock_irq(&port->lock);
if (tty_termios_baud_rate(termios))
tty_termios_encode_baud_rate(termios, baud, baud);
@@ -725,7 +724,7 @@ static void men_z135_set_termios(struct uart_port *port,
iowrite32(bd_reg, port->membase + MEN_Z135_BAUD_REG);
uart_update_timeout(port, termios->c_cflag, baud);
- spin_unlock(&port->lock);
+ spin_unlock_irq(&port->lock);
}
static const char *men_z135_type(struct uart_port *port)
diff --git a/drivers/tty/serial/samsung.c b/drivers/tty/serial/samsung.c
index 67d0c213b..5916311ee 100644
--- a/drivers/tty/serial/samsung.c
+++ b/drivers/tty/serial/samsung.c
@@ -295,15 +295,6 @@ static int s3c24xx_serial_start_tx_dma(struct s3c24xx_uart_port *ourport,
if (ourport->tx_mode != S3C24XX_TX_DMA)
enable_tx_dma(ourport);
- while (xmit->tail & (dma_get_cache_alignment() - 1)) {
- if (rd_regl(port, S3C2410_UFSTAT) & ourport->info->tx_fifofull)
- return 0;
- wr_regb(port, S3C2410_UTXH, xmit->buf[xmit->tail]);
- xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
- port->icount.tx++;
- count--;
- }
-
dma->tx_size = count & ~(dma_get_cache_alignment() - 1);
dma->tx_transfer_addr = dma->tx_addr + xmit->tail;
@@ -342,7 +333,9 @@ static void s3c24xx_serial_start_next_tx(struct s3c24xx_uart_port *ourport)
return;
}
- if (!ourport->dma || !ourport->dma->tx_chan || count < port->fifosize)
+ if (!ourport->dma || !ourport->dma->tx_chan ||
+ count < ourport->min_dma_size ||
+ xmit->tail & (dma_get_cache_alignment() - 1))
s3c24xx_serial_start_tx_pio(ourport);
else
s3c24xx_serial_start_tx_dma(ourport, count);
@@ -736,15 +729,20 @@ static irqreturn_t s3c24xx_serial_tx_chars(int irq, void *id)
struct uart_port *port = &ourport->port;
struct circ_buf *xmit = &port->state->xmit;
unsigned long flags;
- int count;
+ int count, dma_count = 0;
spin_lock_irqsave(&port->lock, flags);
count = CIRC_CNT_TO_END(xmit->head, xmit->tail, UART_XMIT_SIZE);
- if (ourport->dma && ourport->dma->tx_chan && count >= port->fifosize) {
- s3c24xx_serial_start_tx_dma(ourport, count);
- goto out;
+ if (ourport->dma && ourport->dma->tx_chan &&
+ count >= ourport->min_dma_size) {
+ int align = dma_get_cache_alignment() -
+ (xmit->tail & (dma_get_cache_alignment() - 1));
+ if (count-align >= ourport->min_dma_size) {
+ dma_count = count-align;
+ count = align;
+ }
}
if (port->x_char) {
@@ -765,14 +763,24 @@ static irqreturn_t s3c24xx_serial_tx_chars(int irq, void *id)
/* try and drain the buffer... */
- count = port->fifosize;
- while (!uart_circ_empty(xmit) && count-- > 0) {
+ if (count > port->fifosize) {
+ count = port->fifosize;
+ dma_count = 0;
+ }
+
+ while (!uart_circ_empty(xmit) && count > 0) {
if (rd_regl(port, S3C2410_UFSTAT) & ourport->info->tx_fifofull)
break;
wr_regb(port, S3C2410_UTXH, xmit->buf[xmit->tail]);
xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
port->icount.tx++;
+ count--;
+ }
+
+ if (!count && dma_count) {
+ s3c24xx_serial_start_tx_dma(ourport, dma_count);
+ goto out;
}
if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) {
@@ -1838,6 +1846,13 @@ static int s3c24xx_serial_probe(struct platform_device *pdev)
else if (ourport->info->fifosize)
ourport->port.fifosize = ourport->info->fifosize;
+ /*
+ * DMA transfers must be aligned at least to cache line size,
+ * so find minimal transfer size suitable for DMA mode
+ */
+ ourport->min_dma_size = max_t(int, ourport->port.fifosize,
+ dma_get_cache_alignment());
+
probe_index++;
dbg("%s: initialising port %p...\n", __func__, ourport);
diff --git a/drivers/tty/serial/samsung.h b/drivers/tty/serial/samsung.h
index d275032aa..fc5deaa4f 100644
--- a/drivers/tty/serial/samsung.h
+++ b/drivers/tty/serial/samsung.h
@@ -82,6 +82,7 @@ struct s3c24xx_uart_port {
unsigned char tx_claimed;
unsigned int pm_level;
unsigned long baudclk_rate;
+ unsigned int min_dma_size;
unsigned int rx_irq;
unsigned int tx_irq;
generated by cgit v1.2.3 (git 2.25.1) at 2024-05-23 16:13:44 +0000