diff options
Diffstat (limited to 'drivers/usb/atm/ueagle-atm.c')
| -rw-r--r-- | drivers/usb/atm/ueagle-atm.c | 2783 |
1 files changed, 2783 insertions, 0 deletions
diff --git a/drivers/usb/atm/ueagle-atm.c b/drivers/usb/atm/ueagle-atm.c new file mode 100644 index 000000000..750407329 --- /dev/null +++ b/drivers/usb/atm/ueagle-atm.c @@ -0,0 +1,2783 @@ +/*- + * Copyright (c) 2003, 2004 + * Damien Bergamini <damien.bergamini@free.fr>. All rights reserved. + * + * Copyright (c) 2005-2007 Matthieu Castet <castet.matthieu@free.fr> + * Copyright (c) 2005-2007 Stanislaw Gruszka <stf_xl@wp.pl> + * + * This software is available to you under a choice of one of two + * licenses. You may choose to be licensed under the terms of the GNU + * General Public License (GPL) Version 2, available from the file + * COPYING in the main directory of this source tree, or the + * BSD license below: + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice unmodified, this list of conditions, and the following + * disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * + * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + * + * GPL license : + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * + * + * HISTORY : some part of the code was base on ueagle 1.3 BSD driver, + * Damien Bergamini agree to put his code under a DUAL GPL/BSD license. + * + * The rest of the code was was rewritten from scratch. + */ + +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/crc32.h> +#include <linux/usb.h> +#include <linux/firmware.h> +#include <linux/ctype.h> +#include <linux/sched.h> +#include <linux/kthread.h> +#include <linux/mutex.h> +#include <linux/freezer.h> +#include <linux/slab.h> +#include <linux/kernel.h> + +#include <asm/unaligned.h> + +#include "usbatm.h" + +#define EAGLEUSBVERSION "ueagle 1.4" + + +/* + * Debug macros + */ +#define uea_dbg(usb_dev, format, args...) \ + do { \ + if (debug >= 1) \ + dev_dbg(&(usb_dev)->dev, \ + "[ueagle-atm dbg] %s: " format, \ + __func__, ##args); \ + } while (0) + +#define uea_vdbg(usb_dev, format, args...) \ + do { \ + if (debug >= 2) \ + dev_dbg(&(usb_dev)->dev, \ + "[ueagle-atm vdbg] " format, ##args); \ + } while (0) + +#define uea_enters(usb_dev) \ + uea_vdbg(usb_dev, "entering %s\n" , __func__) + +#define uea_leaves(usb_dev) \ + uea_vdbg(usb_dev, "leaving %s\n" , __func__) + +#define uea_err(usb_dev, format, args...) \ + dev_err(&(usb_dev)->dev , "[UEAGLE-ATM] " format , ##args) + +#define uea_warn(usb_dev, format, args...) \ + dev_warn(&(usb_dev)->dev , "[Ueagle-atm] " format, ##args) + +#define uea_info(usb_dev, format, args...) \ + dev_info(&(usb_dev)->dev , "[ueagle-atm] " format, ##args) + +struct intr_pkt; + +/* cmv's from firmware */ +struct uea_cmvs_v1 { + u32 address; + u16 offset; + u32 data; +} __packed; + +struct uea_cmvs_v2 { + u32 group; + u32 address; + u32 offset; + u32 data; +} __packed; + +/* information about currently processed cmv */ +struct cmv_dsc_e1 { + u8 function; + u16 idx; + u32 address; + u16 offset; +}; + +struct cmv_dsc_e4 { + u16 function; + u16 offset; + u16 address; + u16 group; +}; + +union cmv_dsc { + struct cmv_dsc_e1 e1; + struct cmv_dsc_e4 e4; +}; + +struct uea_softc { + struct usb_device *usb_dev; + struct usbatm_data *usbatm; + + int modem_index; + unsigned int driver_info; + int annex; +#define ANNEXA 0 +#define ANNEXB 1 + + int booting; + int reset; + + wait_queue_head_t sync_q; + + struct task_struct *kthread; + u32 data; + u32 data1; + + int cmv_ack; + union cmv_dsc cmv_dsc; + + struct work_struct task; + u16 pageno; + u16 ovl; + + const struct firmware *dsp_firm; + struct urb *urb_int; + + void (*dispatch_cmv) (struct uea_softc *, struct intr_pkt *); + void (*schedule_load_page) (struct uea_softc *, struct intr_pkt *); + int (*stat) (struct uea_softc *); + int (*send_cmvs) (struct uea_softc *); + + /* keep in sync with eaglectl */ + struct uea_stats { + struct { + u32 state; + u32 flags; + u32 mflags; + u32 vidcpe; + u32 vidco; + u32 dsrate; + u32 usrate; + u32 dsunc; + u32 usunc; + u32 dscorr; + u32 uscorr; + u32 txflow; + u32 rxflow; + u32 usattenuation; + u32 dsattenuation; + u32 dsmargin; + u32 usmargin; + u32 firmid; + } phy; + } stats; +}; + +/* + * Elsa IDs + */ +#define ELSA_VID 0x05CC +#define ELSA_PID_PSTFIRM 0x3350 +#define ELSA_PID_PREFIRM 0x3351 + +#define ELSA_PID_A_PREFIRM 0x3352 +#define ELSA_PID_A_PSTFIRM 0x3353 +#define ELSA_PID_B_PREFIRM 0x3362 +#define ELSA_PID_B_PSTFIRM 0x3363 + +/* + * Devolo IDs : pots if (pid & 0x10) + */ +#define DEVOLO_VID 0x1039 +#define DEVOLO_EAGLE_I_A_PID_PSTFIRM 0x2110 +#define DEVOLO_EAGLE_I_A_PID_PREFIRM 0x2111 + +#define DEVOLO_EAGLE_I_B_PID_PSTFIRM 0x2100 +#define DEVOLO_EAGLE_I_B_PID_PREFIRM 0x2101 + +#define DEVOLO_EAGLE_II_A_PID_PSTFIRM 0x2130 +#define DEVOLO_EAGLE_II_A_PID_PREFIRM 0x2131 + +#define DEVOLO_EAGLE_II_B_PID_PSTFIRM 0x2120 +#define DEVOLO_EAGLE_II_B_PID_PREFIRM 0x2121 + +/* + * Reference design USB IDs + */ +#define ANALOG_VID 0x1110 +#define ADI930_PID_PREFIRM 0x9001 +#define ADI930_PID_PSTFIRM 0x9000 + +#define EAGLE_I_PID_PREFIRM 0x9010 /* Eagle I */ +#define EAGLE_I_PID_PSTFIRM 0x900F /* Eagle I */ + +#define EAGLE_IIC_PID_PREFIRM 0x9024 /* Eagle IIC */ +#define EAGLE_IIC_PID_PSTFIRM 0x9023 /* Eagle IIC */ + +#define EAGLE_II_PID_PREFIRM 0x9022 /* Eagle II */ +#define EAGLE_II_PID_PSTFIRM 0x9021 /* Eagle II */ + +#define EAGLE_III_PID_PREFIRM 0x9032 /* Eagle III */ +#define EAGLE_III_PID_PSTFIRM 0x9031 /* Eagle III */ + +#define EAGLE_IV_PID_PREFIRM 0x9042 /* Eagle IV */ +#define EAGLE_IV_PID_PSTFIRM 0x9041 /* Eagle IV */ + +/* + * USR USB IDs + */ +#define USR_VID 0x0BAF +#define MILLER_A_PID_PREFIRM 0x00F2 +#define MILLER_A_PID_PSTFIRM 0x00F1 +#define MILLER_B_PID_PREFIRM 0x00FA +#define MILLER_B_PID_PSTFIRM 0x00F9 +#define HEINEKEN_A_PID_PREFIRM 0x00F6 +#define HEINEKEN_A_PID_PSTFIRM 0x00F5 +#define HEINEKEN_B_PID_PREFIRM 0x00F8 +#define HEINEKEN_B_PID_PSTFIRM 0x00F7 + +#define PREFIRM 0 +#define PSTFIRM (1<<7) +#define AUTO_ANNEX_A (1<<8) +#define AUTO_ANNEX_B (1<<9) + +enum { + ADI930 = 0, + EAGLE_I, + EAGLE_II, + EAGLE_III, + EAGLE_IV +}; + +/* macros for both struct usb_device_id and struct uea_softc */ +#define UEA_IS_PREFIRM(x) \ + (!((x)->driver_info & PSTFIRM)) +#define UEA_CHIP_VERSION(x) \ + ((x)->driver_info & 0xf) + +#define IS_ISDN(x) \ + ((x)->annex & ANNEXB) + +#define INS_TO_USBDEV(ins) (ins->usb_dev) + +#define GET_STATUS(data) \ + ((data >> 8) & 0xf) + +#define IS_OPERATIONAL(sc) \ + ((UEA_CHIP_VERSION(sc) != EAGLE_IV) ? \ + (GET_STATUS(sc->stats.phy.state) == 2) : \ + (sc->stats.phy.state == 7)) + +/* + * Set of macros to handle unaligned data in the firmware blob. + * The FW_GET_BYTE() macro is provided only for consistency. + */ + +#define FW_GET_BYTE(p) (*((__u8 *) (p))) + +#define FW_DIR "/*(DEBLOBBED)*/" +#define EAGLE_FIRMWARE FW_DIR "/*(DEBLOBBED)*/" +#define ADI930_FIRMWARE FW_DIR "/*(DEBLOBBED)*/" +#define EAGLE_I_FIRMWARE FW_DIR "/*(DEBLOBBED)*/" +#define EAGLE_II_FIRMWARE FW_DIR "/*(DEBLOBBED)*/" +#define EAGLE_III_FIRMWARE FW_DIR "/*(DEBLOBBED)*/" +#define EAGLE_IV_FIRMWARE FW_DIR "/*(DEBLOBBED)*/" + +#define DSP4I_FIRMWARE FW_DIR "/*(DEBLOBBED)*/" +#define DSP4P_FIRMWARE FW_DIR "/*(DEBLOBBED)*/" +#define DSP9I_FIRMWARE FW_DIR "/*(DEBLOBBED)*/" +#define DSP9P_FIRMWARE FW_DIR "/*(DEBLOBBED)*/" +#define DSPEI_FIRMWARE FW_DIR "/*(DEBLOBBED)*/" +#define DSPEP_FIRMWARE FW_DIR "/*(DEBLOBBED)*/" +#define FPGA930_FIRMWARE FW_DIR "/*(DEBLOBBED)*/" + +#define CMV4P_FIRMWARE FW_DIR "/*(DEBLOBBED)*/" +#define CMV4PV2_FIRMWARE FW_DIR "/*(DEBLOBBED)*/" +#define CMV4I_FIRMWARE FW_DIR "/*(DEBLOBBED)*/" +#define CMV4IV2_FIRMWARE FW_DIR "/*(DEBLOBBED)*/" +#define CMV9P_FIRMWARE FW_DIR "/*(DEBLOBBED)*/" +#define CMV9PV2_FIRMWARE FW_DIR "/*(DEBLOBBED)*/" +#define CMV9I_FIRMWARE FW_DIR "/*(DEBLOBBED)*/" +#define CMV9IV2_FIRMWARE FW_DIR "/*(DEBLOBBED)*/" +#define CMVEP_FIRMWARE FW_DIR "/*(DEBLOBBED)*/" +#define CMVEPV2_FIRMWARE FW_DIR "/*(DEBLOBBED)*/" +#define CMVEI_FIRMWARE FW_DIR "/*(DEBLOBBED)*/" +#define CMVEIV2_FIRMWARE FW_DIR "/*(DEBLOBBED)*/" + +#define UEA_FW_NAME_MAX 30 +#define NB_MODEM 4 + +#define BULK_TIMEOUT 300 +#define CTRL_TIMEOUT 1000 + +#define ACK_TIMEOUT msecs_to_jiffies(3000) + +#define UEA_INTR_IFACE_NO 0 +#define UEA_US_IFACE_NO 1 +#define UEA_DS_IFACE_NO 2 + +#define FASTEST_ISO_INTF 8 + +#define UEA_BULK_DATA_PIPE 0x02 +#define UEA_IDMA_PIPE 0x04 +#define UEA_INTR_PIPE 0x04 +#define UEA_ISO_DATA_PIPE 0x08 + +#define UEA_E1_SET_BLOCK 0x0001 +#define UEA_E4_SET_BLOCK 0x002c +#define UEA_SET_MODE 0x0003 +#define UEA_SET_2183_DATA 0x0004 +#define UEA_SET_TIMEOUT 0x0011 + +#define UEA_LOOPBACK_OFF 0x0002 +#define UEA_LOOPBACK_ON 0x0003 +#define UEA_BOOT_IDMA 0x0006 +#define UEA_START_RESET 0x0007 +#define UEA_END_RESET 0x0008 + +#define UEA_SWAP_MAILBOX (0x3fcd | 0x4000) +#define UEA_MPTX_START (0x3fce | 0x4000) +#define UEA_MPTX_MAILBOX (0x3fd6 | 0x4000) +#define UEA_MPRX_MAILBOX (0x3fdf | 0x4000) + +/* block information in eagle4 dsp firmware */ +struct block_index { + __le32 PageOffset; + __le32 NotLastBlock; + __le32 dummy; + __le32 PageSize; + __le32 PageAddress; + __le16 dummy1; + __le16 PageNumber; +} __packed; + +#define E4_IS_BOOT_PAGE(PageSize) ((le32_to_cpu(PageSize)) & 0x80000000) +#define E4_PAGE_BYTES(PageSize) ((le32_to_cpu(PageSize) & 0x7fffffff) * 4) + +#define E4_L1_STRING_HEADER 0x10 +#define E4_MAX_PAGE_NUMBER 0x58 +#define E4_NO_SWAPPAGE_HEADERS 0x31 + +/* l1_code is eagle4 dsp firmware format */ +struct l1_code { + u8 string_header[E4_L1_STRING_HEADER]; + u8 page_number_to_block_index[E4_MAX_PAGE_NUMBER]; + struct block_index page_header[E4_NO_SWAPPAGE_HEADERS]; + u8 code[0]; +} __packed; + +/* structures describing a block within a DSP page */ +struct block_info_e1 { + __le16 wHdr; + __le16 wAddress; + __le16 wSize; + __le16 wOvlOffset; + __le16 wOvl; /* overlay */ + __le16 wLast; +} __packed; +#define E1_BLOCK_INFO_SIZE 12 + +struct block_info_e4 { + __be16 wHdr; + __u8 bBootPage; + __u8 bPageNumber; + __be32 dwSize; + __be32 dwAddress; + __be16 wReserved; +} __packed; +#define E4_BLOCK_INFO_SIZE 14 + +#define UEA_BIHDR 0xabcd +#define UEA_RESERVED 0xffff + +/* constants describing cmv type */ +#define E1_PREAMBLE 0x535c +#define E1_MODEMTOHOST 0x01 +#define E1_HOSTTOMODEM 0x10 + +#define E1_MEMACCESS 0x1 +#define E1_ADSLDIRECTIVE 0x7 +#define E1_FUNCTION_TYPE(f) ((f) >> 4) +#define E1_FUNCTION_SUBTYPE(f) ((f) & 0x0f) + +#define E4_MEMACCESS 0 +#define E4_ADSLDIRECTIVE 0xf +#define E4_FUNCTION_TYPE(f) ((f) >> 8) +#define E4_FUNCTION_SIZE(f) ((f) & 0x0f) +#define E4_FUNCTION_SUBTYPE(f) (((f) >> 4) & 0x0f) + +/* for MEMACCESS */ +#define E1_REQUESTREAD 0x0 +#define E1_REQUESTWRITE 0x1 +#define E1_REPLYREAD 0x2 +#define E1_REPLYWRITE 0x3 + +#define E4_REQUESTREAD 0x0 +#define E4_REQUESTWRITE 0x4 +#define E4_REPLYREAD (E4_REQUESTREAD | 1) +#define E4_REPLYWRITE (E4_REQUESTWRITE | 1) + +/* for ADSLDIRECTIVE */ +#define E1_KERNELREADY 0x0 +#define E1_MODEMREADY 0x1 + +#define E4_KERNELREADY 0x0 +#define E4_MODEMREADY 0x1 + +#define E1_MAKEFUNCTION(t, s) (((t) & 0xf) << 4 | ((s) & 0xf)) +#define E4_MAKEFUNCTION(t, st, s) (((t) & 0xf) << 8 | \ + ((st) & 0xf) << 4 | ((s) & 0xf)) + +#define E1_MAKESA(a, b, c, d) \ + (((c) & 0xff) << 24 | \ + ((d) & 0xff) << 16 | \ + ((a) & 0xff) << 8 | \ + ((b) & 0xff)) + +#define E1_GETSA1(a) ((a >> 8) & 0xff) +#define E1_GETSA2(a) (a & 0xff) +#define E1_GETSA3(a) ((a >> 24) & 0xff) +#define E1_GETSA4(a) ((a >> 16) & 0xff) + +#define E1_SA_CNTL E1_MAKESA('C', 'N', 'T', 'L') +#define E1_SA_DIAG E1_MAKESA('D', 'I', 'A', 'G') +#define E1_SA_INFO E1_MAKESA('I', 'N', 'F', 'O') +#define E1_SA_OPTN E1_MAKESA('O', 'P', 'T', 'N') +#define E1_SA_RATE E1_MAKESA('R', 'A', 'T', 'E') +#define E1_SA_STAT E1_MAKESA('S', 'T', 'A', 'T') + +#define E4_SA_CNTL 1 +#define E4_SA_STAT 2 +#define E4_SA_INFO 3 +#define E4_SA_TEST 4 +#define E4_SA_OPTN 5 +#define E4_SA_RATE 6 +#define E4_SA_DIAG 7 +#define E4_SA_CNFG 8 + +/* structures representing a CMV (Configuration and Management Variable) */ +struct cmv_e1 { + __le16 wPreamble; + __u8 bDirection; + __u8 bFunction; + __le16 wIndex; + __le32 dwSymbolicAddress; + __le16 wOffsetAddress; + __le32 dwData; +} __packed; + +struct cmv_e4 { + __be16 wGroup; + __be16 wFunction; + __be16 wOffset; + __be16 wAddress; + __be32 dwData[6]; +} __packed; + +/* structures representing swap information */ +struct swap_info_e1 { + __u8 bSwapPageNo; + __u8 bOvl; /* overlay */ +} __packed; + +struct swap_info_e4 { + __u8 bSwapPageNo; +} __packed; + +/* structures representing interrupt data */ +#define e1_bSwapPageNo u.e1.s1.swapinfo.bSwapPageNo +#define e1_bOvl u.e1.s1.swapinfo.bOvl +#define e4_bSwapPageNo u.e4.s1.swapinfo.bSwapPageNo + +#define INT_LOADSWAPPAGE 0x0001 +#define INT_INCOMINGCMV 0x0002 + +union intr_data_e1 { + struct { + struct swap_info_e1 swapinfo; + __le16 wDataSize; + } __packed s1; + struct { + struct cmv_e1 cmv; + __le16 wDataSize; + } __packed s2; +} __packed; + +union intr_data_e4 { + struct { + struct swap_info_e4 swapinfo; + __le16 wDataSize; + } __packed s1; + struct { + struct cmv_e4 cmv; + __le16 wDataSize; + } __packed s2; +} __packed; + +struct intr_pkt { + __u8 bType; + __u8 bNotification; + __le16 wValue; + __le16 wIndex; + __le16 wLength; + __le16 wInterrupt; + union { + union intr_data_e1 e1; + union intr_data_e4 e4; + } u; +} __packed; + +#define E1_INTR_PKT_SIZE 28 +#define E4_INTR_PKT_SIZE 64 + +static struct usb_driver uea_driver; +static DEFINE_MUTEX(uea_mutex); +static const char * const chip_name[] = { + "ADI930", "Eagle I", "Eagle II", "Eagle III", "Eagle IV"}; + +static int modem_index; +static unsigned int debug; +static unsigned int altsetting[NB_MODEM] = { + [0 ... (NB_MODEM - 1)] = FASTEST_ISO_INTF}; +static bool sync_wait[NB_MODEM]; +static char *cmv_file[NB_MODEM]; +static int annex[NB_MODEM]; + +module_param(debug, uint, 0644); +MODULE_PARM_DESC(debug, "module debug level (0=off,1=on,2=verbose)"); +module_param_array(altsetting, uint, NULL, 0644); +MODULE_PARM_DESC(altsetting, "alternate setting for incoming traffic: 0=bulk, " + "1=isoc slowest, ... , 8=isoc fastest (default)"); +module_param_array(sync_wait, bool, NULL, 0644); +MODULE_PARM_DESC(sync_wait, "wait the synchronisation before starting ATM"); +module_param_array(cmv_file, charp, NULL, 0644); +MODULE_PARM_DESC(cmv_file, + "file name with configuration and management variables"); +module_param_array(annex, uint, NULL, 0644); +MODULE_PARM_DESC(annex, + "manually set annex a/b (0=auto, 1=annex a, 2=annex b)"); + +#define uea_wait(sc, cond, timeo) \ +({ \ + int _r = wait_event_interruptible_timeout(sc->sync_q, \ + (cond) || kthread_should_stop(), timeo); \ + if (kthread_should_stop()) \ + _r = -ENODEV; \ + _r; \ +}) + +#define UPDATE_ATM_STAT(type, val) \ + do { \ + if (sc->usbatm->atm_dev) \ + sc->usbatm->atm_dev->type = val; \ + } while (0) + +#define UPDATE_ATM_SIGNAL(val) \ + do { \ + if (sc->usbatm->atm_dev) \ + atm_dev_signal_change(sc->usbatm->atm_dev, val); \ + } while (0) + + +/* Firmware loading */ +#define LOAD_INTERNAL 0xA0 +#define F8051_USBCS 0x7f92 + +/** + * uea_send_modem_cmd - Send a command for pre-firmware devices. + */ +static int uea_send_modem_cmd(struct usb_device *usb, + u16 addr, u16 size, const u8 *buff) +{ + int ret = -ENOMEM; + u8 *xfer_buff; + + xfer_buff = kmemdup(buff, size, GFP_KERNEL); + if (xfer_buff) { + ret = usb_control_msg(usb, + usb_sndctrlpipe(usb, 0), + LOAD_INTERNAL, + USB_DIR_OUT | USB_TYPE_VENDOR | + USB_RECIP_DEVICE, addr, 0, xfer_buff, + size, CTRL_TIMEOUT); + kfree(xfer_buff); + } + + if (ret < 0) + return ret; + + return (ret == size) ? 0 : -EIO; +} + +static void uea_upload_pre_firmware(const struct firmware *fw_entry, + void *context) +{ + struct usb_device *usb = context; + const u8 *pfw; + u8 value; + u32 crc = 0; + int ret, size; + + uea_enters(usb); + if (!fw_entry) { + uea_err(usb, "firmware is not available\n"); + goto err; + } + + pfw = fw_entry->data; + size = fw_entry->size; + if (size < 4) + goto err_fw_corrupted; + + crc = get_unaligned_le32(pfw); + pfw += 4; + size -= 4; + if (crc32_be(0, pfw, size) != crc) + goto err_fw_corrupted; + + /* + * Start to upload firmware : send reset + */ + value = 1; + ret = uea_send_modem_cmd(usb, F8051_USBCS, sizeof(value), &value); + + if (ret < 0) { + uea_err(usb, "modem reset failed with error %d\n", ret); + goto err; + } + + while (size > 3) { + u8 len = FW_GET_BYTE(pfw); + u16 add = get_unaligned_le16(pfw + 1); + + size -= len + 3; + if (size < 0) + goto err_fw_corrupted; + + ret = uea_send_modem_cmd(usb, add, len, pfw + 3); + if (ret < 0) { + uea_err(usb, "uploading firmware data failed " + "with error %d\n", ret); + goto err; + } + pfw += len + 3; + } + + if (size != 0) + goto err_fw_corrupted; + + /* + * Tell the modem we finish : de-assert reset + */ + value = 0; + ret = uea_send_modem_cmd(usb, F8051_USBCS, 1, &value); + if (ret < 0) + uea_err(usb, "modem de-assert failed with error %d\n", ret); + else + uea_info(usb, "firmware uploaded\n"); + + goto err; + +err_fw_corrupted: + uea_err(usb, "firmware is corrupted\n"); +err: + release_firmware(fw_entry); + uea_leaves(usb); +} + +/** + * uea_load_firmware - Load usb firmware for pre-firmware devices. + */ +static int uea_load_firmware(struct usb_device *usb, unsigned int ver) +{ + int ret; + char *fw_name = EAGLE_FIRMWARE; + + uea_enters(usb); + uea_info(usb, "pre-firmware device, uploading firmware\n"); + + switch (ver) { + case ADI930: + fw_name = ADI930_FIRMWARE; + break; + case EAGLE_I: + fw_name = EAGLE_I_FIRMWARE; + break; + case EAGLE_II: + fw_name = EAGLE_II_FIRMWARE; + break; + case EAGLE_III: + fw_name = EAGLE_III_FIRMWARE; + break; + case EAGLE_IV: + fw_name = EAGLE_IV_FIRMWARE; + break; + } + + ret = reject_firmware_nowait(THIS_MODULE, 1, fw_name, &usb->dev, + GFP_KERNEL, usb, + uea_upload_pre_firmware); + if (ret) + uea_err(usb, "firmware %s is not available\n", fw_name); + else + uea_info(usb, "loading firmware %s\n", fw_name); + + uea_leaves(usb); + return ret; +} + +/* modem management : dsp firmware, send/read CMV, monitoring statistic + */ + +/* + * Make sure that the DSP code provided is safe to use. + */ +static int check_dsp_e1(const u8 *dsp, unsigned int len) +{ + u8 pagecount, blockcount; + u16 blocksize; + u32 pageoffset; + unsigned int i, j, p, pp; + + pagecount = FW_GET_BYTE(dsp); + p = 1; + + /* enough space for page offsets? */ + if (p + 4 * pagecount > len) + return 1; + + for (i = 0; i < pagecount; i++) { + + pageoffset = get_unaligned_le32(dsp + p); + p += 4; + + if (pageoffset == 0) + continue; + + /* enough space for blockcount? */ + if (pageoffset >= len) + return 1; + + pp = pageoffset; + blockcount = FW_GET_BYTE(dsp + pp); + pp += 1; + + for (j = 0; j < blockcount; j++) { + + /* enough space for block header? */ + if (pp + 4 > len) + return 1; + + pp += 2; /* skip blockaddr */ + blocksize = get_unaligned_le16(dsp + pp); + pp += 2; + + /* enough space for block data? */ + if (pp + blocksize > len) + return 1; + + pp += blocksize; + } + } + + return 0; +} + +static int check_dsp_e4(const u8 *dsp, int len) +{ + int i; + struct l1_code *p = (struct l1_code *) dsp; + unsigned int sum = p->code - dsp; + + if (len < sum) + return 1; + + if (strcmp("STRATIPHY ANEXA", p->string_header) != 0 && + strcmp("STRATIPHY ANEXB", p->string_header) != 0) + return 1; + + for (i = 0; i < E4_MAX_PAGE_NUMBER; i++) { + struct block_index *blockidx; + u8 blockno = p->page_number_to_block_index[i]; + if (blockno >= E4_NO_SWAPPAGE_HEADERS) + continue; + + do { + u64 l; + + if (blockno >= E4_NO_SWAPPAGE_HEADERS) + return 1; + + blockidx = &p->page_header[blockno++]; + if ((u8 *)(blockidx + 1) - dsp >= len) + return 1; + + if (le16_to_cpu(blockidx->PageNumber) != i) + return 1; + + l = E4_PAGE_BYTES(blockidx->PageSize); + sum += l; + l += le32_to_cpu(blockidx->PageOffset); + if (l > len) + return 1; + + /* zero is zero regardless endianes */ + } while (blockidx->NotLastBlock); + } + + return (sum == len) ? 0 : 1; +} + +/* + * send data to the idma pipe + * */ +static int uea_idma_write(struct uea_softc *sc, const void *data, u32 size) +{ + int ret = -ENOMEM; + u8 *xfer_buff; + int bytes_read; + + xfer_buff = kmemdup(data, size, GFP_KERNEL); + if (!xfer_buff) { + uea_err(INS_TO_USBDEV(sc), "can't allocate xfer_buff\n"); + return ret; + } + + ret = usb_bulk_msg(sc->usb_dev, + usb_sndbulkpipe(sc->usb_dev, UEA_IDMA_PIPE), + xfer_buff, size, &bytes_read, BULK_TIMEOUT); + + kfree(xfer_buff); + if (ret < 0) + return ret; + if (size != bytes_read) { + uea_err(INS_TO_USBDEV(sc), "size != bytes_read %d %d\n", size, + bytes_read); + return -EIO; + } + + return 0; +} + +static int request_dsp(struct uea_softc *sc) +{ + int ret; + char *dsp_name; + + if (UEA_CHIP_VERSION(sc) == EAGLE_IV) { + if (IS_ISDN(sc)) + dsp_name = DSP4I_FIRMWARE; + else + dsp_name = DSP4P_FIRMWARE; + } else if (UEA_CHIP_VERSION(sc) == ADI930) { + if (IS_ISDN(sc)) + dsp_name = DSP9I_FIRMWARE; + else + dsp_name = DSP9P_FIRMWARE; + } else { + if (IS_ISDN(sc)) + dsp_name = DSPEI_FIRMWARE; + else + dsp_name = DSPEP_FIRMWARE; + } + + ret = reject_firmware(&sc->dsp_firm, dsp_name, &sc->usb_dev->dev); + if (ret < 0) { + uea_err(INS_TO_USBDEV(sc), + "requesting firmware %s failed with error %d\n", + dsp_name, ret); + return ret; + } + + if (UEA_CHIP_VERSION(sc) == EAGLE_IV) + ret = check_dsp_e4(sc->dsp_firm->data, sc->dsp_firm->size); + else + ret = check_dsp_e1(sc->dsp_firm->data, sc->dsp_firm->size); + + if (ret) { + uea_err(INS_TO_USBDEV(sc), "firmware %s is corrupted\n", + dsp_name); + release_firmware(sc->dsp_firm); + sc->dsp_firm = NULL; + return -EILSEQ; + } + + return 0; +} + +/* + * The uea_load_page() function must be called within a process context + */ +static void uea_load_page_e1(struct work_struct *work) +{ + struct uea_softc *sc = container_of(work, struct uea_softc, task); + u16 pageno = sc->pageno; + u16 ovl = sc->ovl; + struct block_info_e1 bi; + + const u8 *p; + u8 pagecount, blockcount; + u16 blockaddr, blocksize; + u32 pageoffset; + int i; + + /* reload firmware when reboot start and it's loaded already */ + if (ovl == 0 && pageno == 0) { + release_firmware(sc->dsp_firm); + sc->dsp_firm = NULL; + } + + if (sc->dsp_firm == NULL && request_dsp(sc) < 0) + return; + + p = sc->dsp_firm->data; + pagecount = FW_GET_BYTE(p); + p += 1; + + if (pageno >= pagecount) + goto bad1; + + p += 4 * pageno; + pageoffset = get_unaligned_le32(p); + + if (pageoffset == 0) + goto bad1; + + p = sc->dsp_firm->data + pageoffset; + blockcount = FW_GET_BYTE(p); + p += 1; + + uea_dbg(INS_TO_USBDEV(sc), + "sending %u blocks for DSP page %u\n", blockcount, pageno); + + bi.wHdr = cpu_to_le16(UEA_BIHDR); + bi.wOvl = cpu_to_le16(ovl); + bi.wOvlOffset = cpu_to_le16(ovl | 0x8000); + + for (i = 0; i < blockcount; i++) { + blockaddr = get_unaligned_le16(p); + p += 2; + + blocksize = get_unaligned_le16(p); + p += 2; + + bi.wSize = cpu_to_le16(blocksize); + bi.wAddress = cpu_to_le16(blockaddr); + bi.wLast = cpu_to_le16((i == blockcount - 1) ? 1 : 0); + + /* send block info through the IDMA pipe */ + if (uea_idma_write(sc, &bi, E1_BLOCK_INFO_SIZE)) + goto bad2; + + /* send block data through the IDMA pipe */ + if (uea_idma_write(sc, p, blocksize)) + goto bad2; + + p += blocksize; + } + + return; + +bad2: + uea_err(INS_TO_USBDEV(sc), "sending DSP block %u failed\n", i); + return; +bad1: + uea_err(INS_TO_USBDEV(sc), "invalid DSP page %u requested\n", pageno); +} + +static void __uea_load_page_e4(struct uea_softc *sc, u8 pageno, int boot) +{ + struct block_info_e4 bi; + struct block_index *blockidx; + struct l1_code *p = (struct l1_code *) sc->dsp_firm->data; + u8 blockno = p->page_number_to_block_index[pageno]; + + bi.wHdr = cpu_to_be16(UEA_BIHDR); + bi.bBootPage = boot; + bi.bPageNumber = pageno; + bi.wReserved = cpu_to_be16(UEA_RESERVED); + + do { + const u8 *blockoffset; + unsigned int blocksize; + + blockidx = &p->page_header[blockno]; + blocksize = E4_PAGE_BYTES(blockidx->PageSize); + blockoffset = sc->dsp_firm->data + le32_to_cpu( + blockidx->PageOffset); + + bi.dwSize = cpu_to_be32(blocksize); + bi.dwAddress = cpu_to_be32(le32_to_cpu(blockidx->PageAddress)); + + uea_dbg(INS_TO_USBDEV(sc), + "sending block %u for DSP page " + "%u size %u address %x\n", + blockno, pageno, blocksize, + le32_to_cpu(blockidx->PageAddress)); + + /* send block info through the IDMA pipe */ + if (uea_idma_write(sc, &bi, E4_BLOCK_INFO_SIZE)) + goto bad; + + /* send block data through the IDMA pipe */ + if (uea_idma_write(sc, blockoffset, blocksize)) + goto bad; + + blockno++; + } while (blockidx->NotLastBlock); + + return; + +bad: + uea_err(INS_TO_USBDEV(sc), "sending DSP block %u failed\n", blockno); + return; +} + +static void uea_load_page_e4(struct work_struct *work) +{ + struct uea_softc *sc = container_of(work, struct uea_softc, task); + u8 pageno = sc->pageno; + int i; + struct block_info_e4 bi; + struct l1_code *p; + + uea_dbg(INS_TO_USBDEV(sc), "sending DSP page %u\n", pageno); + + /* reload firmware when reboot start and it's loaded already */ + if (pageno == 0) { + release_firmware(sc->dsp_firm); + sc->dsp_firm = NULL; + } + + if (sc->dsp_firm == NULL && request_dsp(sc) < 0) + return; + + p = (struct l1_code *) sc->dsp_firm->data; + if (pageno >= le16_to_cpu(p->page_header[0].PageNumber)) { + uea_err(INS_TO_USBDEV(sc), "invalid DSP " + "page %u requested\n", pageno); + return; + } + + if (pageno != 0) { + __uea_load_page_e4(sc, pageno, 0); + return; + } + + uea_dbg(INS_TO_USBDEV(sc), + "sending Main DSP page %u\n", p->page_header[0].PageNumber); + + for (i = 0; i < le16_to_cpu(p->page_header[0].PageNumber); i++) { + if (E4_IS_BOOT_PAGE(p->page_header[i].PageSize)) + __uea_load_page_e4(sc, i, 1); + } + + uea_dbg(INS_TO_USBDEV(sc) , "sending start bi\n"); + + bi.wHdr = cpu_to_be16(UEA_BIHDR); + bi.bBootPage = 0; + bi.bPageNumber = 0xff; + bi.wReserved = cpu_to_be16(UEA_RESERVED); + bi.dwSize = cpu_to_be32(E4_PAGE_BYTES(p->page_header[0].PageSize)); + bi.dwAddress = cpu_to_be32(le32_to_cpu(p->page_header[0].PageAddress)); + + /* send block info through the IDMA pipe */ + if (uea_idma_write(sc, &bi, E4_BLOCK_INFO_SIZE)) + uea_err(INS_TO_USBDEV(sc), "sending DSP start bi failed\n"); +} + +static inline void wake_up_cmv_ack(struct uea_softc *sc) +{ + BUG_ON(sc->cmv_ack); + sc->cmv_ack = 1; + wake_up(&sc->sync_q); +} + +static inline int wait_cmv_ack(struct uea_softc *sc) +{ + int ret = uea_wait(sc, sc->cmv_ack , ACK_TIMEOUT); + + sc->cmv_ack = 0; + + uea_dbg(INS_TO_USBDEV(sc), "wait_event_timeout : %d ms\n", + jiffies_to_msecs(ret)); + + if (ret < 0) + return ret; + + return (ret == 0) ? -ETIMEDOUT : 0; +} + +#define UCDC_SEND_ENCAPSULATED_COMMAND 0x00 + +static int uea_request(struct uea_softc *sc, + u16 value, u16 index, u16 size, const void *data) +{ + u8 *xfer_buff; + int ret = -ENOMEM; + + xfer_buff = kmemdup(data, size, GFP_KERNEL); + if (!xfer_buff) { + uea_err(INS_TO_USBDEV(sc), "can't allocate xfer_buff\n"); + return ret; + } + + ret = usb_control_msg(sc->usb_dev, usb_sndctrlpipe(sc->usb_dev, 0), + UCDC_SEND_ENCAPSULATED_COMMAND, + USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE, + value, index, xfer_buff, size, CTRL_TIMEOUT); + + kfree(xfer_buff); + if (ret < 0) { + uea_err(INS_TO_USBDEV(sc), "usb_control_msg error %d\n", ret); + return ret; + } + + if (ret != size) { + uea_err(INS_TO_USBDEV(sc), + "usb_control_msg send only %d bytes (instead of %d)\n", + ret, size); + return -EIO; + } + + return 0; +} + +static int uea_cmv_e1(struct uea_softc *sc, + u8 function, u32 address, u16 offset, u32 data) +{ + struct cmv_e1 cmv; + int ret; + + uea_enters(INS_TO_USBDEV(sc)); + uea_vdbg(INS_TO_USBDEV(sc), "Function : %d-%d, Address : %c%c%c%c, " + "offset : 0x%04x, data : 0x%08x\n", + E1_FUNCTION_TYPE(function), + E1_FUNCTION_SUBTYPE(function), + E1_GETSA1(address), E1_GETSA2(address), + E1_GETSA3(address), + E1_GETSA4(address), offset, data); + + /* we send a request, but we expect a reply */ + sc->cmv_dsc.e1.function = function | 0x2; + sc->cmv_dsc.e1.idx++; + sc->cmv_dsc.e1.address = address; + sc->cmv_dsc.e1.offset = offset; + + cmv.wPreamble = cpu_to_le16(E1_PREAMBLE); + cmv.bDirection = E1_HOSTTOMODEM; + cmv.bFunction = function; + cmv.wIndex = cpu_to_le16(sc->cmv_dsc.e1.idx); + put_unaligned_le32(address, &cmv.dwSymbolicAddress); + cmv.wOffsetAddress = cpu_to_le16(offset); + put_unaligned_le32(data >> 16 | data << 16, &cmv.dwData); + + ret = uea_request(sc, UEA_E1_SET_BLOCK, UEA_MPTX_START, + sizeof(cmv), &cmv); + if (ret < 0) + return ret; + ret = wait_cmv_ack(sc); + uea_leaves(INS_TO_USBDEV(sc)); + return ret; +} + +static int uea_cmv_e4(struct uea_softc *sc, + u16 function, u16 group, u16 address, u16 offset, u32 data) +{ + struct cmv_e4 cmv; + int ret; + + uea_enters(INS_TO_USBDEV(sc)); + memset(&cmv, 0, sizeof(cmv)); + + uea_vdbg(INS_TO_USBDEV(sc), "Function : %d-%d, Group : 0x%04x, " + "Address : 0x%04x, offset : 0x%04x, data : 0x%08x\n", + E4_FUNCTION_TYPE(function), E4_FUNCTION_SUBTYPE(function), + group, address, offset, data); + + /* we send a request, but we expect a reply */ + sc->cmv_dsc.e4.function = function | (0x1 << 4); + sc->cmv_dsc.e4.offset = offset; + sc->cmv_dsc.e4.address = address; + sc->cmv_dsc.e4.group = group; + + cmv.wFunction = cpu_to_be16(function); + cmv.wGroup = cpu_to_be16(group); + cmv.wAddress = cpu_to_be16(address); + cmv.wOffset = cpu_to_be16(offset); + cmv.dwData[0] = cpu_to_be32(data); + + ret = uea_request(sc, UEA_E4_SET_BLOCK, UEA_MPTX_START, + sizeof(cmv), &cmv); + if (ret < 0) + return ret; + ret = wait_cmv_ack(sc); + uea_leaves(INS_TO_USBDEV(sc)); + return ret; +} + +static inline int uea_read_cmv_e1(struct uea_softc *sc, + u32 address, u16 offset, u32 *data) +{ + int ret = uea_cmv_e1(sc, E1_MAKEFUNCTION(E1_MEMACCESS, E1_REQUESTREAD), + address, offset, 0); + if (ret < 0) + uea_err(INS_TO_USBDEV(sc), + "reading cmv failed with error %d\n", ret); + else + *data = sc->data; + + return ret; +} + +static inline int uea_read_cmv_e4(struct uea_softc *sc, + u8 size, u16 group, u16 address, u16 offset, u32 *data) +{ + int ret = uea_cmv_e4(sc, E4_MAKEFUNCTION(E4_MEMACCESS, + E4_REQUESTREAD, size), + group, address, offset, 0); + if (ret < 0) + uea_err(INS_TO_USBDEV(sc), + "reading cmv failed with error %d\n", ret); + else { + *data = sc->data; + /* size is in 16-bit word quantities */ + if (size > 2) + *(data + 1) = sc->data1; + } + return ret; +} + +static inline int uea_write_cmv_e1(struct uea_softc *sc, + u32 address, u16 offset, u32 data) +{ + int ret = uea_cmv_e1(sc, E1_MAKEFUNCTION(E1_MEMACCESS, E1_REQUESTWRITE), + address, offset, data); + if (ret < 0) + uea_err(INS_TO_USBDEV(sc), + "writing cmv failed with error %d\n", ret); + + return ret; +} + +static inline int uea_write_cmv_e4(struct uea_softc *sc, + u8 size, u16 group, u16 address, u16 offset, u32 data) +{ + int ret = uea_cmv_e4(sc, E4_MAKEFUNCTION(E4_MEMACCESS, + E4_REQUESTWRITE, size), + group, address, offset, data); + if (ret < 0) + uea_err(INS_TO_USBDEV(sc), + "writing cmv failed with error %d\n", ret); + + return ret; +} + +static void uea_set_bulk_timeout(struct uea_softc *sc, u32 dsrate) +{ + int ret; + u16 timeout; + + /* in bulk mode the modem have problem with high rate + * changing internal timing could improve things, but the + * value is mysterious. + * ADI930 don't support it (-EPIPE error). + */ + + if (UEA_CHIP_VERSION(sc) == ADI930 || + altsetting[sc->modem_index] > 0 || + sc->stats.phy.dsrate == dsrate) + return; + + /* Original timming (1Mbit/s) from ADI (used in windows driver) */ + timeout = (dsrate <= 1024*1024) ? 0 : 1; + ret = uea_request(sc, UEA_SET_TIMEOUT, timeout, 0, NULL); + uea_info(INS_TO_USBDEV(sc), "setting new timeout %d%s\n", + timeout, ret < 0 ? " failed" : ""); + +} + +/* + * Monitor the modem and update the stat + * return 0 if everything is ok + * return < 0 if an error occurs (-EAGAIN reboot needed) + */ +static int uea_stat_e1(struct uea_softc *sc) +{ + u32 data; + int ret; + + uea_enters(INS_TO_USBDEV(sc)); + data = sc->stats.phy.state; + + ret = uea_read_cmv_e1(sc, E1_SA_STAT, 0, &sc->stats.phy.state); + if (ret < 0) + return ret; + + switch (GET_STATUS(sc->stats.phy.state)) { + case 0: /* not yet synchronized */ + uea_dbg(INS_TO_USBDEV(sc), + "modem not yet synchronized\n"); + return 0; + + case 1: /* initialization */ + uea_dbg(INS_TO_USBDEV(sc), "modem initializing\n"); + return 0; + + case 2: /* operational */ + uea_vdbg(INS_TO_USBDEV(sc), "modem operational\n"); + break; + + case 3: /* fail ... */ + uea_info(INS_TO_USBDEV(sc), "modem synchronization failed" + " (may be try other cmv/dsp)\n"); + return -EAGAIN; + + case 4 ... 6: /* test state */ + uea_warn(INS_TO_USBDEV(sc), + "modem in test mode - not supported\n"); + return -EAGAIN; + + case 7: /* fast-retain ... */ + uea_info(INS_TO_USBDEV(sc), "modem in fast-retain mode\n"); + return 0; + default: + uea_err(INS_TO_USBDEV(sc), "modem invalid SW mode %d\n", + GET_STATUS(sc->stats.phy.state)); + return -EAGAIN; + } + + if (GET_STATUS(data) != 2) { + uea_request(sc, UEA_SET_MODE, UEA_LOOPBACK_OFF, 0, NULL); + uea_info(INS_TO_USBDEV(sc), "modem operational\n"); + + /* release the dsp firmware as it is not needed until + * the next failure + */ + release_firmware(sc->dsp_firm); + sc->dsp_firm = NULL; + } + + /* always update it as atm layer could not be init when we switch to + * operational state + */ + UPDATE_ATM_SIGNAL(ATM_PHY_SIG_FOUND); + + /* wake up processes waiting for synchronization */ + wake_up(&sc->sync_q); + + ret = uea_read_cmv_e1(sc, E1_SA_DIAG, 2, &sc->stats.phy.flags); + if (ret < 0) + return ret; + sc->stats.phy.mflags |= sc->stats.phy.flags; + + /* in case of a flags ( for example delineation LOSS (& 0x10)), + * we check the status again in order to detect the failure earlier + */ + if (sc->stats.phy.flags) { + uea_dbg(INS_TO_USBDEV(sc), "Stat flag = 0x%x\n", + sc->stats.phy.flags); + return 0; + } + + ret = uea_read_cmv_e1(sc, E1_SA_RATE, 0, &data); + if (ret < 0) + return ret; + + uea_set_bulk_timeout(sc, (data >> 16) * 32); + sc->stats.phy.dsrate = (data >> 16) * 32; + sc->stats.phy.usrate = (data & 0xffff) * 32; + UPDATE_ATM_STAT(link_rate, sc->stats.phy.dsrate * 1000 / 424); + + ret = uea_read_cmv_e1(sc, E1_SA_DIAG, 23, &data); + if (ret < 0) + return ret; + sc->stats.phy.dsattenuation = (data & 0xff) / 2; + + ret = uea_read_cmv_e1(sc, E1_SA_DIAG, 47, &data); + if (ret < 0) + return ret; + sc->stats.phy.usattenuation = (data & 0xff) / 2; + + ret = uea_read_cmv_e1(sc, E1_SA_DIAG, 25, &sc->stats.phy.dsmargin); + if (ret < 0) + return ret; + + ret = uea_read_cmv_e1(sc, E1_SA_DIAG, 49, &sc->stats.phy.usmargin); + if (ret < 0) + return ret; + + ret = uea_read_cmv_e1(sc, E1_SA_DIAG, 51, &sc->stats.phy.rxflow); + if (ret < 0) + return ret; + + ret = uea_read_cmv_e1(sc, E1_SA_DIAG, 52, &sc->stats.phy.txflow); + if (ret < 0) + return ret; + + ret = uea_read_cmv_e1(sc, E1_SA_DIAG, 54, &sc->stats.phy.dsunc); + if (ret < 0) + return ret; + + /* only for atu-c */ + ret = uea_read_cmv_e1(sc, E1_SA_DIAG, 58, &sc->stats.phy.usunc); + if (ret < 0) + return ret; + + ret = uea_read_cmv_e1(sc, E1_SA_DIAG, 53, &sc->stats.phy.dscorr); + if (ret < 0) + return ret; + + /* only for atu-c */ + ret = uea_read_cmv_e1(sc, E1_SA_DIAG, 57, &sc->stats.phy.uscorr); + if (ret < 0) + return ret; + + ret = uea_read_cmv_e1(sc, E1_SA_INFO, 8, &sc->stats.phy.vidco); + if (ret < 0) + return ret; + + ret = uea_read_cmv_e1(sc, E1_SA_INFO, 13, &sc->stats.phy.vidcpe); + if (ret < 0) + return ret; + + return 0; +} + +static int uea_stat_e4(struct uea_softc *sc) +{ + u32 data; + u32 tmp_arr[2]; + int ret; + + uea_enters(INS_TO_USBDEV(sc)); + data = sc->stats.phy.state; + + /* XXX only need to be done before operationnal... */ + ret = uea_read_cmv_e4(sc, 1, E4_SA_STAT, 0, 0, &sc->stats.phy.state); + if (ret < 0) + return ret; + + switch (sc->stats.phy.state) { + case 0x0: /* not yet synchronized */ + case 0x1: + case 0x3: + case 0x4: + uea_dbg(INS_TO_USBDEV(sc), "modem not yet " + "synchronized\n"); + return 0; + case 0x5: /* initialization */ + case 0x6: + case 0x9: + case 0xa: + uea_dbg(INS_TO_USBDEV(sc), "modem initializing\n"); + return 0; + case 0x2: /* fail ... */ + uea_info(INS_TO_USBDEV(sc), "modem synchronization " + "failed (may be try other cmv/dsp)\n"); + return -EAGAIN; + case 0x7: /* operational */ + break; + default: + uea_warn(INS_TO_USBDEV(sc), "unknown state: %x\n", + sc->stats.phy.state); + return 0; + } + + if (data != 7) { + uea_request(sc, UEA_SET_MODE, UEA_LOOPBACK_OFF, 0, NULL); + uea_info(INS_TO_USBDEV(sc), "modem operational\n"); + + /* release the dsp firmware as it is not needed until + * the next failure + */ + release_firmware(sc->dsp_firm); + sc->dsp_firm = NULL; + } + + /* always update it as atm layer could not be init when we switch to + * operational state + */ + UPDATE_ATM_SIGNAL(ATM_PHY_SIG_FOUND); + + /* wake up processes waiting for synchronization */ + wake_up(&sc->sync_q); + + /* TODO improve this state machine : + * we need some CMV info : what they do and their unit + * we should find the equivalent of eagle3- CMV + */ + /* check flags */ + ret = uea_read_cmv_e4(sc, 1, E4_SA_DIAG, 0, 0, &sc->stats.phy.flags); + if (ret < 0) + return ret; + sc->stats.phy.mflags |= sc->stats.phy.flags; + + /* in case of a flags ( for example delineation LOSS (& 0x10)), + * we check the status again in order to detect the failure earlier + */ + if (sc->stats.phy.flags) { + uea_dbg(INS_TO_USBDEV(sc), "Stat flag = 0x%x\n", + sc->stats.phy.flags); + if (sc->stats.phy.flags & 1) /* delineation LOSS */ + return -EAGAIN; + if (sc->stats.phy.flags & 0x4000) /* Reset Flag */ + return -EAGAIN; + return 0; + } + + /* rate data may be in upper or lower half of 64 bit word, strange */ + ret = uea_read_cmv_e4(sc, 4, E4_SA_RATE, 0, 0, tmp_arr); + if (ret < 0) + return ret; + data = (tmp_arr[0]) ? tmp_arr[0] : tmp_arr[1]; + sc->stats.phy.usrate = data / 1000; + + ret = uea_read_cmv_e4(sc, 4, E4_SA_RATE, 1, 0, tmp_arr); + if (ret < 0) + return ret; + data = (tmp_arr[0]) ? tmp_arr[0] : tmp_arr[1]; + uea_set_bulk_timeout(sc, data / 1000); + sc->stats.phy.dsrate = data / 1000; + UPDATE_ATM_STAT(link_rate, sc->stats.phy.dsrate * 1000 / 424); + + ret = uea_read_cmv_e4(sc, 1, E4_SA_INFO, 68, 1, &data); + if (ret < 0) + return ret; + sc->stats.phy.dsattenuation = data / 10; + + ret = uea_read_cmv_e4(sc, 1, E4_SA_INFO, 69, 1, &data); + if (ret < 0) + return ret; + sc->stats.phy.usattenuation = data / 10; + + ret = uea_read_cmv_e4(sc, 1, E4_SA_INFO, 68, 3, &data); + if (ret < 0) + return ret; + sc->stats.phy.dsmargin = data / 2; + + ret = uea_read_cmv_e4(sc, 1, E4_SA_INFO, 69, 3, &data); + if (ret < 0) + return ret; + sc->stats.phy.usmargin = data / 10; + + return 0; +} + +static void cmvs_file_name(struct uea_softc *sc, char *const cmv_name, int ver) +{ + char file_arr[] = "/*(DEBLOBBED)*/"; + char *file; + + kparam_block_sysfs_write(cmv_file); + /* set proper name corresponding modem version and line type */ + if (cmv_file[sc->modem_index] == NULL) { + if (UEA_CHIP_VERSION(sc) == ADI930) + file_arr[3] = '9'; + else if (UEA_CHIP_VERSION(sc) == EAGLE_IV) + file_arr[3] = '4'; + else + file_arr[3] = 'e'; + + file_arr[4] = IS_ISDN(sc) ? 'i' : 'p'; + file = file_arr; + } else + file = cmv_file[sc->modem_index]; + + strcpy(cmv_name, FW_DIR); + strlcat(cmv_name, file, UEA_FW_NAME_MAX); + if (ver == 2) + strlcat(cmv_name, ".v2", UEA_FW_NAME_MAX); + kparam_unblock_sysfs_write(cmv_file); +} + +static int request_cmvs_old(struct uea_softc *sc, + void **cmvs, const struct firmware **fw) +{ + int ret, size; + u8 *data; + char cmv_name[UEA_FW_NAME_MAX]; /* 30 bytes stack variable */ + + cmvs_file_name(sc, cmv_name, 1); + ret = reject_firmware(fw, cmv_name, &sc->usb_dev->dev); + if (ret < 0) { + uea_err(INS_TO_USBDEV(sc), + "requesting firmware %s failed with error %d\n", + cmv_name, ret); + return ret; + } + + data = (u8 *) (*fw)->data; + size = (*fw)->size; + if (size < 1) + goto err_fw_corrupted; + + if (size != *data * sizeof(struct uea_cmvs_v1) + 1) + goto err_fw_corrupted; + + *cmvs = (void *)(data + 1); + return *data; + +err_fw_corrupted: + uea_err(INS_TO_USBDEV(sc), "firmware %s is corrupted\n", cmv_name); + release_firmware(*fw); + return -EILSEQ; +} + +static int request_cmvs(struct uea_softc *sc, + void **cmvs, const struct firmware **fw, int *ver) +{ + int ret, size; + u32 crc; + u8 *data; + char cmv_name[UEA_FW_NAME_MAX]; /* 30 bytes stack variable */ + + cmvs_file_name(sc, cmv_name, 2); + ret = reject_firmware(fw, cmv_name, &sc->usb_dev->dev); + if (ret < 0) { + /* if caller can handle old version, try to provide it */ + if (*ver == 1) { + uea_warn(INS_TO_USBDEV(sc), "requesting " + "firmware %s failed, " + "try to get older cmvs\n", cmv_name); + return request_cmvs_old(sc, cmvs, fw); + } + uea_err(INS_TO_USBDEV(sc), + "requesting firmware %s failed with error %d\n", + cmv_name, ret); + return ret; + } + + size = (*fw)->size; + data = (u8 *) (*fw)->data; + if (size < 4 || strncmp(data, "cmv2", 4) != 0) { + if (*ver == 1) { + uea_warn(INS_TO_USBDEV(sc), "firmware %s is corrupted," + " try to get older cmvs\n", cmv_name); + release_firmware(*fw); + return request_cmvs_old(sc, cmvs, fw); + } + goto err_fw_corrupted; + } + + *ver = 2; + + data += 4; + size -= 4; + if (size < 5) + goto err_fw_corrupted; + + crc = get_unaligned_le32(data); + data += 4; + size -= 4; + if (crc32_be(0, data, size) != crc) + goto err_fw_corrupted; + + if (size != *data * sizeof(struct uea_cmvs_v2) + 1) + goto err_fw_corrupted; + + *cmvs = (void *) (data + 1); + return *data; + +err_fw_corrupted: + uea_err(INS_TO_USBDEV(sc), "firmware %s is corrupted\n", cmv_name); + release_firmware(*fw); + return -EILSEQ; +} + +static int uea_send_cmvs_e1(struct uea_softc *sc) +{ + int i, ret, len; + void *cmvs_ptr; + const struct firmware *cmvs_fw; + int ver = 1; /* we can handle v1 cmv firmware version; */ + + /* Enter in R-IDLE (cmv) until instructed otherwise */ + ret = uea_write_cmv_e1(sc, E1_SA_CNTL, 0, 1); + if (ret < 0) + return ret; + + /* Dump firmware version */ + ret = uea_read_cmv_e1(sc, E1_SA_INFO, 10, &sc->stats.phy.firmid); + if (ret < 0) + return ret; + uea_info(INS_TO_USBDEV(sc), "ATU-R firmware version : %x\n", + sc->stats.phy.firmid); + + /* get options */ + ret = len = request_cmvs(sc, &cmvs_ptr, &cmvs_fw, &ver); + if (ret < 0) + return ret; + + /* send options */ + if (ver == 1) { + struct uea_cmvs_v1 *cmvs_v1 = cmvs_ptr; + + uea_warn(INS_TO_USBDEV(sc), "use deprecated cmvs version, " + "please update your firmware\n"); + + for (i = 0; i < len; i++) { + ret = uea_write_cmv_e1(sc, + get_unaligned_le32(&cmvs_v1[i].address), + get_unaligned_le16(&cmvs_v1[i].offset), + get_unaligned_le32(&cmvs_v1[i].data)); + if (ret < 0) + goto out; + } + } else if (ver == 2) { + struct uea_cmvs_v2 *cmvs_v2 = cmvs_ptr; + + for (i = 0; i < len; i++) { + ret = uea_write_cmv_e1(sc, + get_unaligned_le32(&cmvs_v2[i].address), + (u16) get_unaligned_le32(&cmvs_v2[i].offset), + get_unaligned_le32(&cmvs_v2[i].data)); + if (ret < 0) + goto out; + } + } else { + /* This really should not happen */ + uea_err(INS_TO_USBDEV(sc), "bad cmvs version %d\n", ver); + goto out; + } + + /* Enter in R-ACT-REQ */ + ret = uea_write_cmv_e1(sc, E1_SA_CNTL, 0, 2); + uea_vdbg(INS_TO_USBDEV(sc), "Entering in R-ACT-REQ state\n"); + uea_info(INS_TO_USBDEV(sc), "modem started, waiting " + "synchronization...\n"); +out: + release_firmware(cmvs_fw); + return ret; +} + +static int uea_send_cmvs_e4(struct uea_softc *sc) +{ + int i, ret, len; + void *cmvs_ptr; + const struct firmware *cmvs_fw; + int ver = 2; /* we can only handle v2 cmv firmware version; */ + + /* Enter in R-IDLE (cmv) until instructed otherwise */ + ret = uea_write_cmv_e4(sc, 1, E4_SA_CNTL, 0, 0, 1); + if (ret < 0) + return ret; + + /* Dump firmware version */ + /* XXX don't read the 3th byte as it is always 6 */ + ret = uea_read_cmv_e4(sc, 2, E4_SA_INFO, 55, 0, &sc->stats.phy.firmid); + if (ret < 0) + return ret; + uea_info(INS_TO_USBDEV(sc), "ATU-R firmware version : %x\n", + sc->stats.phy.firmid); + + + /* get options */ + ret = len = request_cmvs(sc, &cmvs_ptr, &cmvs_fw, &ver); + if (ret < 0) + return ret; + + /* send options */ + if (ver == 2) { + struct uea_cmvs_v2 *cmvs_v2 = cmvs_ptr; + + for (i = 0; i < len; i++) { + ret = uea_write_cmv_e4(sc, 1, + get_unaligned_le32(&cmvs_v2[i].group), + get_unaligned_le32(&cmvs_v2[i].address), + get_unaligned_le32(&cmvs_v2[i].offset), + get_unaligned_le32(&cmvs_v2[i].data)); + if (ret < 0) + goto out; + } + } else { + /* This really should not happen */ + uea_err(INS_TO_USBDEV(sc), "bad cmvs version %d\n", ver); + goto out; + } + + /* Enter in R-ACT-REQ */ + ret = uea_write_cmv_e4(sc, 1, E4_SA_CNTL, 0, 0, 2); + uea_vdbg(INS_TO_USBDEV(sc), "Entering in R-ACT-REQ state\n"); + uea_info(INS_TO_USBDEV(sc), "modem started, waiting " + "synchronization...\n"); +out: + release_firmware(cmvs_fw); + return ret; +} + +/* Start boot post firmware modem: + * - send reset commands through usb control pipe + * - start workqueue for DSP loading + * - send CMV options to modem + */ + +static int uea_start_reset(struct uea_softc *sc) +{ + u16 zero = 0; /* ;-) */ + int ret; + + uea_enters(INS_TO_USBDEV(sc)); + uea_info(INS_TO_USBDEV(sc), "(re)booting started\n"); + + /* mask interrupt */ + sc->booting = 1; + /* We need to set this here because, a ack timeout could have occurred, + * but before we start the reboot, the ack occurs and set this to 1. + * So we will failed to wait Ready CMV. + */ + sc->cmv_ack = 0; + UPDATE_ATM_SIGNAL(ATM_PHY_SIG_LOST); + + /* reset statistics */ + memset(&sc->stats, 0, sizeof(struct uea_stats)); + + /* tell the modem that we want to boot in IDMA mode */ + uea_request(sc, UEA_SET_MODE, UEA_LOOPBACK_ON, 0, NULL); + uea_request(sc, UEA_SET_MODE, UEA_BOOT_IDMA, 0, NULL); + + /* enter reset mode */ + uea_request(sc, UEA_SET_MODE, UEA_START_RESET, 0, NULL); + + /* original driver use 200ms, but windows driver use 100ms */ + ret = uea_wait(sc, 0, msecs_to_jiffies(100)); + if (ret < 0) + return ret; + + /* leave reset mode */ + uea_request(sc, UEA_SET_MODE, UEA_END_RESET, 0, NULL); + + if (UEA_CHIP_VERSION(sc) != EAGLE_IV) { + /* clear tx and rx mailboxes */ + uea_request(sc, UEA_SET_2183_DATA, UEA_MPTX_MAILBOX, 2, &zero); + uea_request(sc, UEA_SET_2183_DATA, UEA_MPRX_MAILBOX, 2, &zero); + uea_request(sc, UEA_SET_2183_DATA, UEA_SWAP_MAILBOX, 2, &zero); + } + + ret = uea_wait(sc, 0, msecs_to_jiffies(1000)); + if (ret < 0) + return ret; + + if (UEA_CHIP_VERSION(sc) == EAGLE_IV) + sc->cmv_dsc.e4.function = E4_MAKEFUNCTION(E4_ADSLDIRECTIVE, + E4_MODEMREADY, 1); + else + sc->cmv_dsc.e1.function = E1_MAKEFUNCTION(E1_ADSLDIRECTIVE, + E1_MODEMREADY); + + /* demask interrupt */ + sc->booting = 0; + + /* start loading DSP */ + sc->pageno = 0; + sc->ovl = 0; + schedule_work(&sc->task); + + /* wait for modem ready CMV */ + ret = wait_cmv_ack(sc); + if (ret < 0) + return ret; + + uea_vdbg(INS_TO_USBDEV(sc), "Ready CMV received\n"); + + ret = sc->send_cmvs(sc); + if (ret < 0) + return ret; + + sc->reset = 0; + uea_leaves(INS_TO_USBDEV(sc)); + return ret; +} + +/* + * In case of an error wait 1s before rebooting the modem + * if the modem don't request reboot (-EAGAIN). + * Monitor the modem every 1s. + */ + +static int uea_kthread(void *data) +{ + struct uea_softc *sc = data; + int ret = -EAGAIN; + + set_freezable(); + uea_enters(INS_TO_USBDEV(sc)); + while (!kthread_should_stop()) { + if (ret < 0 || sc->reset) + ret = uea_start_reset(sc); + if (!ret) + ret = sc->stat(sc); + if (ret != -EAGAIN) + uea_wait(sc, 0, msecs_to_jiffies(1000)); + try_to_freeze(); + } + uea_leaves(INS_TO_USBDEV(sc)); + return ret; +} + +/* Load second usb firmware for ADI930 chip */ +static int load_XILINX_firmware(struct uea_softc *sc) +{ + const struct firmware *fw_entry; + int ret, size, u, ln; + const u8 *pfw; + u8 value; + char *fw_name = FPGA930_FIRMWARE; + + uea_enters(INS_TO_USBDEV(sc)); + + ret = reject_firmware(&fw_entry, fw_name, &sc->usb_dev->dev); + if (ret) { + uea_err(INS_TO_USBDEV(sc), "firmware %s is not available\n", + fw_name); + goto err0; + } + + pfw = fw_entry->data; + size = fw_entry->size; + if (size != 0x577B) { + uea_err(INS_TO_USBDEV(sc), "firmware %s is corrupted\n", + fw_name); + ret = -EILSEQ; + goto err1; + } + for (u = 0; u < size; u += ln) { + ln = min(size - u, 64); + ret = uea_request(sc, 0xe, 0, ln, pfw + u); + if (ret < 0) { + uea_err(INS_TO_USBDEV(sc), + "elsa download data failed (%d)\n", ret); + goto err1; + } + } + + /* finish to send the fpga */ + ret = uea_request(sc, 0xe, 1, 0, NULL); + if (ret < 0) { + uea_err(INS_TO_USBDEV(sc), + "elsa download data failed (%d)\n", ret); + goto err1; + } + + /* Tell the modem we finish : de-assert reset */ + value = 0; + ret = uea_send_modem_cmd(sc->usb_dev, 0xe, 1, &value); + if (ret < 0) + uea_err(sc->usb_dev, "elsa de-assert failed with error" + " %d\n", ret); + +err1: + release_firmware(fw_entry); +err0: + uea_leaves(INS_TO_USBDEV(sc)); + return ret; +} + +/* The modem send us an ack. First with check if it right */ +static void uea_dispatch_cmv_e1(struct uea_softc *sc, struct intr_pkt *intr) +{ + struct cmv_dsc_e1 *dsc = &sc->cmv_dsc.e1; + struct cmv_e1 *cmv = &intr->u.e1.s2.cmv; + + uea_enters(INS_TO_USBDEV(sc)); + if (le16_to_cpu(cmv->wPreamble) != E1_PREAMBLE) + goto bad1; + + if (cmv->bDirection != E1_MODEMTOHOST) + goto bad1; + + /* FIXME : ADI930 reply wrong preambule (func = 2, sub = 2) to + * the first MEMACCESS cmv. Ignore it... + */ + if (cmv->bFunction != dsc->function) { + if (UEA_CHIP_VERSION(sc) == ADI930 + && cmv->bFunction == E1_MAKEFUNCTION(2, 2)) { + cmv->wIndex = cpu_to_le16(dsc->idx); + put_unaligned_le32(dsc->address, + &cmv->dwSymbolicAddress); + cmv->wOffsetAddress = cpu_to_le16(dsc->offset); + } else + goto bad2; + } + + if (cmv->bFunction == E1_MAKEFUNCTION(E1_ADSLDIRECTIVE, + E1_MODEMREADY)) { + wake_up_cmv_ack(sc); + uea_leaves(INS_TO_USBDEV(sc)); + return; + } + + /* in case of MEMACCESS */ + if (le16_to_cpu(cmv->wIndex) != dsc->idx || + get_unaligned_le32(&cmv->dwSymbolicAddress) != dsc->address || + le16_to_cpu(cmv->wOffsetAddress) != dsc->offset) + goto bad2; + + sc->data = get_unaligned_le32(&cmv->dwData); + sc->data = sc->data << 16 | sc->data >> 16; + + wake_up_cmv_ack(sc); + uea_leaves(INS_TO_USBDEV(sc)); + return; + +bad2: + uea_err(INS_TO_USBDEV(sc), "unexpected cmv received, " + "Function : %d, Subfunction : %d\n", + E1_FUNCTION_TYPE(cmv->bFunction), + E1_FUNCTION_SUBTYPE(cmv->bFunction)); + uea_leaves(INS_TO_USBDEV(sc)); + return; + +bad1: + uea_err(INS_TO_USBDEV(sc), "invalid cmv received, " + "wPreamble %d, bDirection %d\n", + le16_to_cpu(cmv->wPreamble), cmv->bDirection); + uea_leaves(INS_TO_USBDEV(sc)); +} + +/* The modem send us an ack. First with check if it right */ +static void uea_dispatch_cmv_e4(struct uea_softc *sc, struct intr_pkt *intr) +{ + struct cmv_dsc_e4 *dsc = &sc->cmv_dsc.e4; + struct cmv_e4 *cmv = &intr->u.e4.s2.cmv; + + uea_enters(INS_TO_USBDEV(sc)); + uea_dbg(INS_TO_USBDEV(sc), "cmv %x %x %x %x %x %x\n", + be16_to_cpu(cmv->wGroup), be16_to_cpu(cmv->wFunction), + be16_to_cpu(cmv->wOffset), be16_to_cpu(cmv->wAddress), + be32_to_cpu(cmv->dwData[0]), be32_to_cpu(cmv->dwData[1])); + + if (be16_to_cpu(cmv->wFunction) != dsc->function) + goto bad2; + + if (be16_to_cpu(cmv->wFunction) == E4_MAKEFUNCTION(E4_ADSLDIRECTIVE, + E4_MODEMREADY, 1)) { + wake_up_cmv_ack(sc); + uea_leaves(INS_TO_USBDEV(sc)); + return; + } + + /* in case of MEMACCESS */ + if (be16_to_cpu(cmv->wOffset) != dsc->offset || + be16_to_cpu(cmv->wGroup) != dsc->group || + be16_to_cpu(cmv->wAddress) != dsc->address) + goto bad2; + + sc->data = be32_to_cpu(cmv->dwData[0]); + sc->data1 = be32_to_cpu(cmv->dwData[1]); + wake_up_cmv_ack(sc); + uea_leaves(INS_TO_USBDEV(sc)); + return; + +bad2: + uea_err(INS_TO_USBDEV(sc), "unexpected cmv received, " + "Function : %d, Subfunction : %d\n", + E4_FUNCTION_TYPE(cmv->wFunction), + E4_FUNCTION_SUBTYPE(cmv->wFunction)); + uea_leaves(INS_TO_USBDEV(sc)); + return; +} + +static void uea_schedule_load_page_e1(struct uea_softc *sc, + struct intr_pkt *intr) +{ + sc->pageno = intr->e1_bSwapPageNo; + sc->ovl = intr->e1_bOvl >> 4 | intr->e1_bOvl << 4; + schedule_work(&sc->task); +} + +static void uea_schedule_load_page_e4(struct uea_softc *sc, + struct intr_pkt *intr) +{ + sc->pageno = intr->e4_bSwapPageNo; + schedule_work(&sc->task); +} + +/* + * interrupt handler + */ +static void uea_intr(struct urb *urb) +{ + struct uea_softc *sc = urb->context; + struct intr_pkt *intr = urb->transfer_buffer; + int status = urb->status; + + uea_enters(INS_TO_USBDEV(sc)); + + if (unlikely(status < 0)) { + uea_err(INS_TO_USBDEV(sc), "uea_intr() failed with %d\n", + status); + return; + } + + /* device-to-host interrupt */ + if (intr->bType != 0x08 || sc->booting) { + uea_err(INS_TO_USBDEV(sc), "wrong interrupt\n"); + goto resubmit; + } + + switch (le16_to_cpu(intr->wInterrupt)) { + case INT_LOADSWAPPAGE: + sc->schedule_load_page(sc, intr); + break; + + case INT_INCOMINGCMV: + sc->dispatch_cmv(sc, intr); + break; + + default: + uea_err(INS_TO_USBDEV(sc), "unknown interrupt %u\n", + le16_to_cpu(intr->wInterrupt)); + } + +resubmit: + usb_submit_urb(sc->urb_int, GFP_ATOMIC); +} + +/* + * Start the modem : init the data and start kernel thread + */ +static int uea_boot(struct uea_softc *sc) +{ + int ret, size; + struct intr_pkt *intr; + + uea_enters(INS_TO_USBDEV(sc)); + + if (UEA_CHIP_VERSION(sc) == EAGLE_IV) { + size = E4_INTR_PKT_SIZE; + sc->dispatch_cmv = uea_dispatch_cmv_e4; + sc->schedule_load_page = uea_schedule_load_page_e4; + sc->stat = uea_stat_e4; + sc->send_cmvs = uea_send_cmvs_e4; + INIT_WORK(&sc->task, uea_load_page_e4); + } else { + size = E1_INTR_PKT_SIZE; + sc->dispatch_cmv = uea_dispatch_cmv_e1; + sc->schedule_load_page = uea_schedule_load_page_e1; + sc->stat = uea_stat_e1; + sc->send_cmvs = uea_send_cmvs_e1; + INIT_WORK(&sc->task, uea_load_page_e1); + } + + init_waitqueue_head(&sc->sync_q); + + if (UEA_CHIP_VERSION(sc) == ADI930) + load_XILINX_firmware(sc); + + intr = kmalloc(size, GFP_KERNEL); + if (!intr) { + uea_err(INS_TO_USBDEV(sc), + "cannot allocate interrupt package\n"); + goto err0; + } + + sc->urb_int = usb_alloc_urb(0, GFP_KERNEL); + if (!sc->urb_int) { + uea_err(INS_TO_USBDEV(sc), "cannot allocate interrupt URB\n"); + goto err1; + } + + usb_fill_int_urb(sc->urb_int, sc->usb_dev, + usb_rcvintpipe(sc->usb_dev, UEA_INTR_PIPE), + intr, size, uea_intr, sc, + sc->usb_dev->actconfig->interface[0]->altsetting[0]. + endpoint[0].desc.bInterval); + + ret = usb_submit_urb(sc->urb_int, GFP_KERNEL); + if (ret < 0) { + uea_err(INS_TO_USBDEV(sc), + "urb submition failed with error %d\n", ret); + goto err1; + } + + /* Create worker thread, but don't start it here. Start it after + * all usbatm generic initialization is done. + */ + sc->kthread = kthread_create(uea_kthread, sc, "ueagle-atm"); + if (IS_ERR(sc->kthread)) { + uea_err(INS_TO_USBDEV(sc), "failed to create thread\n"); + goto err2; + } + + uea_leaves(INS_TO_USBDEV(sc)); + return 0; + +err2: + usb_kill_urb(sc->urb_int); +err1: + usb_free_urb(sc->urb_int); + sc->urb_int = NULL; + kfree(intr); +err0: + uea_leaves(INS_TO_USBDEV(sc)); + return -ENOMEM; +} + +/* + * Stop the modem : kill kernel thread and free data + */ +static void uea_stop(struct uea_softc *sc) +{ + int ret; + uea_enters(INS_TO_USBDEV(sc)); + ret = kthread_stop(sc->kthread); + uea_dbg(INS_TO_USBDEV(sc), "kthread finish with status %d\n", ret); + + uea_request(sc, UEA_SET_MODE, UEA_LOOPBACK_ON, 0, NULL); + + usb_kill_urb(sc->urb_int); + kfree(sc->urb_int->transfer_buffer); + usb_free_urb(sc->urb_int); + + /* flush the work item, when no one can schedule it */ + flush_work(&sc->task); + + release_firmware(sc->dsp_firm); + uea_leaves(INS_TO_USBDEV(sc)); +} + +/* syfs interface */ +static struct uea_softc *dev_to_uea(struct device *dev) +{ + struct usb_interface *intf; + struct usbatm_data *usbatm; + + intf = to_usb_interface(dev); + if (!intf) + return NULL; + + usbatm = usb_get_intfdata(intf); + if (!usbatm) + return NULL; + + return usbatm->driver_data; +} + +static ssize_t read_status(struct device *dev, struct device_attribute *attr, + char *buf) +{ + int ret = -ENODEV; + struct uea_softc *sc; + + mutex_lock(&uea_mutex); + sc = dev_to_uea(dev); + if (!sc) + goto out; + ret = snprintf(buf, 10, "%08x\n", sc->stats.phy.state); +out: + mutex_unlock(&uea_mutex); + return ret; +} + +static ssize_t reboot(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count) +{ + int ret = -ENODEV; + struct uea_softc *sc; + + mutex_lock(&uea_mutex); + sc = dev_to_uea(dev); + if (!sc) + goto out; + sc->reset = 1; + ret = count; +out: + mutex_unlock(&uea_mutex); + return ret; +} + +static DEVICE_ATTR(stat_status, S_IWUSR | S_IRUGO, read_status, reboot); + +static ssize_t read_human_status(struct device *dev, + struct device_attribute *attr, char *buf) +{ + int ret = -ENODEV; + int modem_state; + struct uea_softc *sc; + + mutex_lock(&uea_mutex); + sc = dev_to_uea(dev); + if (!sc) + goto out; + + if (UEA_CHIP_VERSION(sc) == EAGLE_IV) { + switch (sc->stats.phy.state) { + case 0x0: /* not yet synchronized */ + case 0x1: + case 0x3: + case 0x4: + modem_state = 0; + break; + case 0x5: /* initialization */ + case 0x6: + case 0x9: + case 0xa: + modem_state = 1; + break; + case 0x7: /* operational */ + modem_state = 2; + break; + case 0x2: /* fail ... */ + modem_state = 3; + break; + default: /* unknown */ + modem_state = 4; + break; + } + } else + modem_state = GET_STATUS(sc->stats.phy.state); + + switch (modem_state) { + case 0: + ret = sprintf(buf, "Modem is booting\n"); + break; + case 1: + ret = sprintf(buf, "Modem is initializing\n"); + break; + case 2: + ret = sprintf(buf, "Modem is operational\n"); + break; + case 3: + ret = sprintf(buf, "Modem synchronization failed\n"); + break; + default: + ret = sprintf(buf, "Modem state is unknown\n"); + break; + } +out: + mutex_unlock(&uea_mutex); + return ret; +} + +static DEVICE_ATTR(stat_human_status, S_IRUGO, read_human_status, NULL); + +static ssize_t read_delin(struct device *dev, struct device_attribute *attr, + char *buf) +{ + int ret = -ENODEV; + struct uea_softc *sc; + char *delin = "GOOD"; + + mutex_lock(&uea_mutex); + sc = dev_to_uea(dev); + if (!sc) + goto out; + + if (UEA_CHIP_VERSION(sc) == EAGLE_IV) { + if (sc->stats.phy.flags & 0x4000) + delin = "RESET"; + else if (sc->stats.phy.flags & 0x0001) + delin = "LOSS"; + } else { + if (sc->stats.phy.flags & 0x0C00) + delin = "ERROR"; + else if (sc->stats.phy.flags & 0x0030) + delin = "LOSS"; + } + + ret = sprintf(buf, "%s\n", delin); +out: + mutex_unlock(&uea_mutex); + return ret; +} + +static DEVICE_ATTR(stat_delin, S_IRUGO, read_delin, NULL); + +#define UEA_ATTR(name, reset) \ + \ +static ssize_t read_##name(struct device *dev, \ + struct device_attribute *attr, char *buf) \ +{ \ + int ret = -ENODEV; \ + struct uea_softc *sc; \ + \ + mutex_lock(&uea_mutex); \ + sc = dev_to_uea(dev); \ + if (!sc) \ + goto out; \ + ret = snprintf(buf, 10, "%08x\n", sc->stats.phy.name); \ + if (reset) \ + sc->stats.phy.name = 0; \ +out: \ + mutex_unlock(&uea_mutex); \ + return ret; \ +} \ + \ +static DEVICE_ATTR(stat_##name, S_IRUGO, read_##name, NULL) + +UEA_ATTR(mflags, 1); +UEA_ATTR(vidcpe, 0); +UEA_ATTR(usrate, 0); +UEA_ATTR(dsrate, 0); +UEA_ATTR(usattenuation, 0); +UEA_ATTR(dsattenuation, 0); +UEA_ATTR(usmargin, 0); +UEA_ATTR(dsmargin, 0); +UEA_ATTR(txflow, 0); +UEA_ATTR(rxflow, 0); +UEA_ATTR(uscorr, 0); +UEA_ATTR(dscorr, 0); +UEA_ATTR(usunc, 0); +UEA_ATTR(dsunc, 0); +UEA_ATTR(firmid, 0); + +/* Retrieve the device End System Identifier (MAC) */ + +static int uea_getesi(struct uea_softc *sc, u_char * esi) +{ + unsigned char mac_str[2 * ETH_ALEN + 1]; + int i; + if (usb_string + (sc->usb_dev, sc->usb_dev->descriptor.iSerialNumber, mac_str, + sizeof(mac_str)) != 2 * ETH_ALEN) + return 1; + + for (i = 0; i < ETH_ALEN; i++) + esi[i] = hex_to_bin(mac_str[2 * i]) * 16 + + hex_to_bin(mac_str[2 * i + 1]); + + return 0; +} + +/* ATM stuff */ +static int uea_atm_open(struct usbatm_data *usbatm, struct atm_dev *atm_dev) +{ + struct uea_softc *sc = usbatm->driver_data; + + return uea_getesi(sc, atm_dev->esi); +} + +static int uea_heavy(struct usbatm_data *usbatm, struct usb_interface *intf) +{ + struct uea_softc *sc = usbatm->driver_data; + + wait_event_interruptible(sc->sync_q, IS_OPERATIONAL(sc)); + + return 0; + +} + +static int claim_interface(struct usb_device *usb_dev, + struct usbatm_data *usbatm, int ifnum) +{ + int ret; + struct usb_interface *intf = usb_ifnum_to_if(usb_dev, ifnum); + + if (!intf) { + uea_err(usb_dev, "interface %d not found\n", ifnum); + return -ENODEV; + } + + ret = usb_driver_claim_interface(&uea_driver, intf, usbatm); + if (ret != 0) + uea_err(usb_dev, "can't claim interface %d, error %d\n", ifnum, + ret); + return ret; +} + +static struct attribute *attrs[] = { + &dev_attr_stat_status.attr, + &dev_attr_stat_mflags.attr, + &dev_attr_stat_human_status.attr, + &dev_attr_stat_delin.attr, + &dev_attr_stat_vidcpe.attr, + &dev_attr_stat_usrate.attr, + &dev_attr_stat_dsrate.attr, + &dev_attr_stat_usattenuation.attr, + &dev_attr_stat_dsattenuation.attr, + &dev_attr_stat_usmargin.attr, + &dev_attr_stat_dsmargin.attr, + &dev_attr_stat_txflow.attr, + &dev_attr_stat_rxflow.attr, + &dev_attr_stat_uscorr.attr, + &dev_attr_stat_dscorr.attr, + &dev_attr_stat_usunc.attr, + &dev_attr_stat_dsunc.attr, + &dev_attr_stat_firmid.attr, + NULL, +}; +static struct attribute_group attr_grp = { + .attrs = attrs, +}; + +static int uea_bind(struct usbatm_data *usbatm, struct usb_interface *intf, + const struct usb_device_id *id) +{ + struct usb_device *usb = interface_to_usbdev(intf); + struct uea_softc *sc; + int ret, ifnum = intf->altsetting->desc.bInterfaceNumber; + unsigned int alt; + + uea_enters(usb); + + /* interface 0 is for firmware/monitoring */ + if (ifnum != UEA_INTR_IFACE_NO) + return -ENODEV; + + usbatm->flags = (sync_wait[modem_index] ? 0 : UDSL_SKIP_HEAVY_INIT); + + /* interface 1 is for outbound traffic */ + ret = claim_interface(usb, usbatm, UEA_US_IFACE_NO); + if (ret < 0) + return ret; + + /* ADI930 has only 2 interfaces and inbound traffic is on interface 1 */ + if (UEA_CHIP_VERSION(id) != ADI930) { + /* interface 2 is for inbound traffic */ + ret = claim_interface(usb, usbatm, UEA_DS_IFACE_NO); + if (ret < 0) + return ret; + } + + sc = kzalloc(sizeof(struct uea_softc), GFP_KERNEL); + if (!sc) { + uea_err(usb, "uea_init: not enough memory !\n"); + return -ENOMEM; + } + + sc->usb_dev = usb; + usbatm->driver_data = sc; + sc->usbatm = usbatm; + sc->modem_index = (modem_index < NB_MODEM) ? modem_index++ : 0; + sc->driver_info = id->driver_info; + + /* first try to use module parameter */ + if (annex[sc->modem_index] == 1) + sc->annex = ANNEXA; + else if (annex[sc->modem_index] == 2) + sc->annex = ANNEXB; + /* try to autodetect annex */ + else if (sc->driver_info & AUTO_ANNEX_A) + sc->annex = ANNEXA; + else if (sc->driver_info & AUTO_ANNEX_B) + sc->annex = ANNEXB; + else + sc->annex = (le16_to_cpu + (sc->usb_dev->descriptor.bcdDevice) & 0x80) ? ANNEXB : ANNEXA; + + alt = altsetting[sc->modem_index]; + /* ADI930 don't support iso */ + if (UEA_CHIP_VERSION(id) != ADI930 && alt > 0) { + if (alt <= 8 && + usb_set_interface(usb, UEA_DS_IFACE_NO, alt) == 0) { + uea_dbg(usb, "set alternate %u for 2 interface\n", alt); + uea_info(usb, "using iso mode\n"); + usbatm->flags |= UDSL_USE_ISOC | UDSL_IGNORE_EILSEQ; + } else { + uea_err(usb, "setting alternate %u failed for " + "2 interface, using bulk mode\n", alt); + } + } + + ret = sysfs_create_group(&intf->dev.kobj, &attr_grp); + if (ret < 0) + goto error; + + ret = uea_boot(sc); + if (ret < 0) + goto error_rm_grp; + + return 0; + +error_rm_grp: + sysfs_remove_group(&intf->dev.kobj, &attr_grp); +error: + kfree(sc); + return ret; +} + +static void uea_unbind(struct usbatm_data *usbatm, struct usb_interface *intf) +{ + struct uea_softc *sc = usbatm->driver_data; + + sysfs_remove_group(&intf->dev.kobj, &attr_grp); + uea_stop(sc); + kfree(sc); +} + +static struct usbatm_driver uea_usbatm_driver = { + .driver_name = "ueagle-atm", + .bind = uea_bind, + .atm_start = uea_atm_open, + .unbind = uea_unbind, + .heavy_init = uea_heavy, + .bulk_in = UEA_BULK_DATA_PIPE, + .bulk_out = UEA_BULK_DATA_PIPE, + .isoc_in = UEA_ISO_DATA_PIPE, +}; + +static int uea_probe(struct usb_interface *intf, const struct usb_device_id *id) +{ + struct usb_device *usb = interface_to_usbdev(intf); + int ret; + + uea_enters(usb); + uea_info(usb, "ADSL device founded vid (%#X) pid (%#X) Rev (%#X): %s\n", + le16_to_cpu(usb->descriptor.idVendor), + le16_to_cpu(usb->descriptor.idProduct), + le16_to_cpu(usb->descriptor.bcdDevice), + chip_name[UEA_CHIP_VERSION(id)]); + + usb_reset_device(usb); + + if (UEA_IS_PREFIRM(id)) + return uea_load_firmware(usb, UEA_CHIP_VERSION(id)); + + ret = usbatm_usb_probe(intf, id, &uea_usbatm_driver); + if (ret == 0) { + struct usbatm_data *usbatm = usb_get_intfdata(intf); + struct uea_softc *sc = usbatm->driver_data; + + /* Ensure carrier is initialized to off as early as possible */ + UPDATE_ATM_SIGNAL(ATM_PHY_SIG_LOST); + + /* Only start the worker thread when all init is done */ + wake_up_process(sc->kthread); + } + + return ret; +} + +static void uea_disconnect(struct usb_interface *intf) +{ + struct usb_device *usb = interface_to_usbdev(intf); + int ifnum = intf->altsetting->desc.bInterfaceNumber; + uea_enters(usb); + + /* ADI930 has 2 interfaces and eagle 3 interfaces. + * Pre-firmware device has one interface + */ + if (usb->config->desc.bNumInterfaces != 1 && ifnum == 0) { + mutex_lock(&uea_mutex); + usbatm_usb_disconnect(intf); + mutex_unlock(&uea_mutex); + uea_info(usb, "ADSL device removed\n"); + } + + uea_leaves(usb); +} + +/* + * List of supported VID/PID + */ +static const struct usb_device_id uea_ids[] = { + {USB_DEVICE(ANALOG_VID, ADI930_PID_PREFIRM), + .driver_info = ADI930 | PREFIRM}, + {USB_DEVICE(ANALOG_VID, ADI930_PID_PSTFIRM), + .driver_info = ADI930 | PSTFIRM}, + {USB_DEVICE(ANALOG_VID, EAGLE_I_PID_PREFIRM), + .driver_info = EAGLE_I | PREFIRM}, + {USB_DEVICE(ANALOG_VID, EAGLE_I_PID_PSTFIRM), + .driver_info = EAGLE_I | PSTFIRM}, + {USB_DEVICE(ANALOG_VID, EAGLE_II_PID_PREFIRM), + .driver_info = EAGLE_II | PREFIRM}, + {USB_DEVICE(ANALOG_VID, EAGLE_II_PID_PSTFIRM), + .driver_info = EAGLE_II | PSTFIRM}, + {USB_DEVICE(ANALOG_VID, EAGLE_IIC_PID_PREFIRM), + .driver_info = EAGLE_II | PREFIRM}, + {USB_DEVICE(ANALOG_VID, EAGLE_IIC_PID_PSTFIRM), + .driver_info = EAGLE_II | PSTFIRM}, + {USB_DEVICE(ANALOG_VID, EAGLE_III_PID_PREFIRM), + .driver_info = EAGLE_III | PREFIRM}, + {USB_DEVICE(ANALOG_VID, EAGLE_III_PID_PSTFIRM), + .driver_info = EAGLE_III | PSTFIRM}, + {USB_DEVICE(ANALOG_VID, EAGLE_IV_PID_PREFIRM), + .driver_info = EAGLE_IV | PREFIRM}, + {USB_DEVICE(ANALOG_VID, EAGLE_IV_PID_PSTFIRM), + .driver_info = EAGLE_IV | PSTFIRM}, + {USB_DEVICE(DEVOLO_VID, DEVOLO_EAGLE_I_A_PID_PREFIRM), + .driver_info = EAGLE_I | PREFIRM}, + {USB_DEVICE(DEVOLO_VID, DEVOLO_EAGLE_I_A_PID_PSTFIRM), + .driver_info = EAGLE_I | PSTFIRM | AUTO_ANNEX_A}, + {USB_DEVICE(DEVOLO_VID, DEVOLO_EAGLE_I_B_PID_PREFIRM), + .driver_info = EAGLE_I | PREFIRM}, + {USB_DEVICE(DEVOLO_VID, DEVOLO_EAGLE_I_B_PID_PSTFIRM), + .driver_info = EAGLE_I | PSTFIRM | AUTO_ANNEX_B}, + {USB_DEVICE(DEVOLO_VID, DEVOLO_EAGLE_II_A_PID_PREFIRM), + .driver_info = EAGLE_II | PREFIRM}, + {USB_DEVICE(DEVOLO_VID, DEVOLO_EAGLE_II_A_PID_PSTFIRM), + .driver_info = EAGLE_II | PSTFIRM | AUTO_ANNEX_A}, + {USB_DEVICE(DEVOLO_VID, DEVOLO_EAGLE_II_B_PID_PREFIRM), + .driver_info = EAGLE_II | PREFIRM}, + {USB_DEVICE(DEVOLO_VID, DEVOLO_EAGLE_II_B_PID_PSTFIRM), + .driver_info = EAGLE_II | PSTFIRM | AUTO_ANNEX_B}, + {USB_DEVICE(ELSA_VID, ELSA_PID_PREFIRM), + .driver_info = ADI930 | PREFIRM}, + {USB_DEVICE(ELSA_VID, ELSA_PID_PSTFIRM), + .driver_info = ADI930 | PSTFIRM}, + {USB_DEVICE(ELSA_VID, ELSA_PID_A_PREFIRM), + .driver_info = ADI930 | PREFIRM}, + {USB_DEVICE(ELSA_VID, ELSA_PID_A_PSTFIRM), + .driver_info = ADI930 | PSTFIRM | AUTO_ANNEX_A}, + {USB_DEVICE(ELSA_VID, ELSA_PID_B_PREFIRM), + .driver_info = ADI930 | PREFIRM}, + {USB_DEVICE(ELSA_VID, ELSA_PID_B_PSTFIRM), + .driver_info = ADI930 | PSTFIRM | AUTO_ANNEX_B}, + {USB_DEVICE(USR_VID, MILLER_A_PID_PREFIRM), + .driver_info = EAGLE_I | PREFIRM}, + {USB_DEVICE(USR_VID, MILLER_A_PID_PSTFIRM), + .driver_info = EAGLE_I | PSTFIRM | AUTO_ANNEX_A}, + {USB_DEVICE(USR_VID, MILLER_B_PID_PREFIRM), + .driver_info = EAGLE_I | PREFIRM}, + {USB_DEVICE(USR_VID, MILLER_B_PID_PSTFIRM), + .driver_info = EAGLE_I | PSTFIRM | AUTO_ANNEX_B}, + {USB_DEVICE(USR_VID, HEINEKEN_A_PID_PREFIRM), + .driver_info = EAGLE_I | PREFIRM}, + {USB_DEVICE(USR_VID, HEINEKEN_A_PID_PSTFIRM), + .driver_info = EAGLE_I | PSTFIRM | AUTO_ANNEX_A}, + {USB_DEVICE(USR_VID, HEINEKEN_B_PID_PREFIRM), + .driver_info = EAGLE_I | PREFIRM}, + {USB_DEVICE(USR_VID, HEINEKEN_B_PID_PSTFIRM), + .driver_info = EAGLE_I | PSTFIRM | AUTO_ANNEX_B}, + {} +}; + +/* + * USB driver descriptor + */ +static struct usb_driver uea_driver = { + .name = "ueagle-atm", + .id_table = uea_ids, + .probe = uea_probe, + .disconnect = uea_disconnect, +}; + +MODULE_DEVICE_TABLE(usb, uea_ids); + +module_usb_driver(uea_driver); + +MODULE_AUTHOR("Damien Bergamini/Matthieu Castet/Stanislaw W. Gruszka"); +MODULE_DESCRIPTION("ADI 930/Eagle USB ADSL Modem driver"); +MODULE_LICENSE("Dual BSD/GPL"); +/*(DEBLOBBED)*/ |