diff options
Diffstat (limited to 'drivers/usb/class')
| -rw-r--r-- | drivers/usb/class/usblp.c | 68 |
1 files changed, 43 insertions, 25 deletions
diff --git a/drivers/usb/class/usblp.c b/drivers/usb/class/usblp.c index f38e875a3..071964c78 100644 --- a/drivers/usb/class/usblp.c +++ b/drivers/usb/class/usblp.c @@ -57,6 +57,7 @@ #include <linux/mutex.h> #undef DEBUG #include <linux/usb.h> +#include <linux/usb/ch9.h> #include <linux/ratelimit.h> /* @@ -79,12 +80,20 @@ #define IOCNR_SOFT_RESET 7 /* Get device_id string: */ #define LPIOC_GET_DEVICE_ID(len) _IOC(_IOC_READ, 'P', IOCNR_GET_DEVICE_ID, len) -/* The following ioctls were added for http://hpoj.sourceforge.net: */ -/* Get two-int array: - * [0]=current protocol (1=7/1/1, 2=7/1/2, 3=7/1/3), - * [1]=supported protocol mask (mask&(1<<n)!=0 means 7/1/n supported): */ +/* The following ioctls were added for http://hpoj.sourceforge.net: + * Get two-int array: + * [0]=current protocol + * (1=USB_CLASS_PRINTER/1/1, 2=USB_CLASS_PRINTER/1/2, + * 3=USB_CLASS_PRINTER/1/3), + * [1]=supported protocol mask (mask&(1<<n)!=0 means + * USB_CLASS_PRINTER/1/n supported): + */ #define LPIOC_GET_PROTOCOLS(len) _IOC(_IOC_READ, 'P', IOCNR_GET_PROTOCOLS, len) -/* Set protocol (arg: 1=7/1/1, 2=7/1/2, 3=7/1/3): */ +/* + * Set protocol + * (arg: 1=USB_CLASS_PRINTER/1/1, 2=USB_CLASS_PRINTER/1/2, + * 3=USB_CLASS_PRINTER/1/3): + */ #define LPIOC_SET_PROTOCOL _IOC(_IOC_WRITE, 'P', IOCNR_SET_PROTOCOL, 0) /* Set channel number (HP Vendor-specific command): */ #define LPIOC_HP_SET_CHANNEL _IOC(_IOC_WRITE, 'P', IOCNR_HP_SET_CHANNEL, 0) @@ -146,8 +155,10 @@ struct usblp { int readcount; /* Counter for reads */ int ifnum; /* Interface number */ struct usb_interface *intf; /* The interface */ - /* Alternate-setting numbers and endpoints for each protocol - * (7/1/{index=1,2,3}) that the device supports: */ + /* + * Alternate-setting numbers and endpoints for each protocol + * (USB_CLASS_PRINTER/1/{index=1,2,3}) that the device supports: + */ struct { int alt_setting; struct usb_endpoint_descriptor *epwrite; @@ -873,11 +884,11 @@ static int usblp_wwait(struct usblp *usblp, int nonblock) add_wait_queue(&usblp->wwait, &waita); for (;;) { - set_current_state(TASK_INTERRUPTIBLE); if (mutex_lock_interruptible(&usblp->mut)) { rc = -EINTR; break; } + set_current_state(TASK_INTERRUPTIBLE); rc = usblp_wtest(usblp, nonblock); mutex_unlock(&usblp->mut); if (rc <= 0) @@ -1206,19 +1217,23 @@ abort_ret: * but our requirements are too intricate for simple match to handle. * * The "proto_bias" option may be used to specify the preferred protocol - * for all USB printers (1=7/1/1, 2=7/1/2, 3=7/1/3). If the device - * supports the preferred protocol, then we bind to it. + * for all USB printers (1=USB_CLASS_PRINTER/1/1, 2=USB_CLASS_PRINTER/1/2, + * 3=USB_CLASS_PRINTER/1/3). If the device supports the preferred protocol, + * then we bind to it. * - * The best interface for us is 7/1/2, because it is compatible - * with a stream of characters. If we find it, we bind to it. + * The best interface for us is USB_CLASS_PRINTER/1/2, because it + * is compatible with a stream of characters. If we find it, we bind to it. * * Note that the people from hpoj.sourceforge.net need to be able to - * bind to 7/1/3 (MLC/1284.4), so we provide them ioctls for this purpose. + * bind to USB_CLASS_PRINTER/1/3 (MLC/1284.4), so we provide them ioctls + * for this purpose. * - * Failing 7/1/2, we look for 7/1/3, even though it's probably not - * stream-compatible, because this matches the behaviour of the old code. + * Failing USB_CLASS_PRINTER/1/2, we look for USB_CLASS_PRINTER/1/3, + * even though it's probably not stream-compatible, because this matches + * the behaviour of the old code. * - * If nothing else, we bind to 7/1/1 - the unidirectional interface. + * If nothing else, we bind to USB_CLASS_PRINTER/1/1 + * - the unidirectional interface. */ static int usblp_select_alts(struct usblp *usblp) { @@ -1236,7 +1251,8 @@ static int usblp_select_alts(struct usblp *usblp) for (i = 0; i < if_alt->num_altsetting; i++) { ifd = &if_alt->altsetting[i]; - if (ifd->desc.bInterfaceClass != 7 || ifd->desc.bInterfaceSubClass != 1) + if (ifd->desc.bInterfaceClass != USB_CLASS_PRINTER || + ifd->desc.bInterfaceSubClass != 1) if (!(usblp->quirks & USBLP_QUIRK_BAD_CLASS)) continue; @@ -1262,8 +1278,10 @@ static int usblp_select_alts(struct usblp *usblp) if (!epwrite || (ifd->desc.bInterfaceProtocol > 1 && !epread)) continue; - /* Turn off reads for 7/1/1 (unidirectional) interfaces - * and buggy bidirectional printers. */ + /* + * Turn off reads for USB_CLASS_PRINTER/1/1 (unidirectional) + * interfaces and buggy bidirectional printers. + */ if (ifd->desc.bInterfaceProtocol == 1) { epread = NULL; } else if (usblp->quirks & USBLP_QUIRK_BIDIR) { @@ -1406,12 +1424,12 @@ static int usblp_resume(struct usb_interface *intf) } static const struct usb_device_id usblp_ids[] = { - { USB_DEVICE_INFO(7, 1, 1) }, - { USB_DEVICE_INFO(7, 1, 2) }, - { USB_DEVICE_INFO(7, 1, 3) }, - { USB_INTERFACE_INFO(7, 1, 1) }, - { USB_INTERFACE_INFO(7, 1, 2) }, - { USB_INTERFACE_INFO(7, 1, 3) }, + { USB_DEVICE_INFO(USB_CLASS_PRINTER, 1, 1) }, + { USB_DEVICE_INFO(USB_CLASS_PRINTER, 1, 2) }, + { USB_DEVICE_INFO(USB_CLASS_PRINTER, 1, 3) }, + { USB_INTERFACE_INFO(USB_CLASS_PRINTER, 1, 1) }, + { USB_INTERFACE_INFO(USB_CLASS_PRINTER, 1, 2) }, + { USB_INTERFACE_INFO(USB_CLASS_PRINTER, 1, 3) }, { USB_DEVICE(0x04b8, 0x0202) }, /* Seiko Epson Receipt Printer M129C */ { } /* Terminating entry */ }; |