summaryrefslogtreecommitdiff
path: root/drivers/usb/dwc2/core.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/usb/dwc2/core.c')
-rw-r--r--drivers/usb/dwc2/core.c421
1 files changed, 336 insertions, 85 deletions
diff --git a/drivers/usb/dwc2/core.c b/drivers/usb/dwc2/core.c
index ef73e498e..46c4ba75d 100644
--- a/drivers/usb/dwc2/core.c
+++ b/drivers/usb/dwc2/core.c
@@ -481,64 +481,168 @@ static void dwc2_init_fs_ls_pclk_sel(struct dwc2_hsotg *hsotg)
* Do core a soft reset of the core. Be careful with this because it
* resets all the internal state machines of the core.
*/
-static int dwc2_core_reset(struct dwc2_hsotg *hsotg)
+int dwc2_core_reset(struct dwc2_hsotg *hsotg)
{
u32 greset;
int count = 0;
- u32 gusbcfg;
dev_vdbg(hsotg->dev, "%s()\n", __func__);
- /* Wait for AHB master IDLE state */
+ /* Core Soft Reset */
+ greset = dwc2_readl(hsotg->regs + GRSTCTL);
+ greset |= GRSTCTL_CSFTRST;
+ dwc2_writel(greset, hsotg->regs + GRSTCTL);
do {
- usleep_range(20000, 40000);
+ udelay(1);
greset = dwc2_readl(hsotg->regs + GRSTCTL);
if (++count > 50) {
dev_warn(hsotg->dev,
- "%s() HANG! AHB Idle GRSTCTL=%0x\n",
+ "%s() HANG! Soft Reset GRSTCTL=%0x\n",
__func__, greset);
return -EBUSY;
}
- } while (!(greset & GRSTCTL_AHBIDLE));
+ } while (greset & GRSTCTL_CSFTRST);
- /* Core Soft Reset */
+ /* Wait for AHB master IDLE state */
count = 0;
- greset |= GRSTCTL_CSFTRST;
- dwc2_writel(greset, hsotg->regs + GRSTCTL);
do {
- usleep_range(20000, 40000);
+ udelay(1);
greset = dwc2_readl(hsotg->regs + GRSTCTL);
if (++count > 50) {
dev_warn(hsotg->dev,
- "%s() HANG! Soft Reset GRSTCTL=%0x\n",
+ "%s() HANG! AHB Idle GRSTCTL=%0x\n",
__func__, greset);
return -EBUSY;
}
- } while (greset & GRSTCTL_CSFTRST);
+ } while (!(greset & GRSTCTL_AHBIDLE));
- if (hsotg->dr_mode == USB_DR_MODE_HOST) {
- gusbcfg = dwc2_readl(hsotg->regs + GUSBCFG);
- gusbcfg &= ~GUSBCFG_FORCEDEVMODE;
- gusbcfg |= GUSBCFG_FORCEHOSTMODE;
- dwc2_writel(gusbcfg, hsotg->regs + GUSBCFG);
- } else if (hsotg->dr_mode == USB_DR_MODE_PERIPHERAL) {
- gusbcfg = dwc2_readl(hsotg->regs + GUSBCFG);
- gusbcfg &= ~GUSBCFG_FORCEHOSTMODE;
- gusbcfg |= GUSBCFG_FORCEDEVMODE;
- dwc2_writel(gusbcfg, hsotg->regs + GUSBCFG);
- } else if (hsotg->dr_mode == USB_DR_MODE_OTG) {
- gusbcfg = dwc2_readl(hsotg->regs + GUSBCFG);
- gusbcfg &= ~GUSBCFG_FORCEHOSTMODE;
- gusbcfg &= ~GUSBCFG_FORCEDEVMODE;
- dwc2_writel(gusbcfg, hsotg->regs + GUSBCFG);
- }
+ return 0;
+}
+
+/*
+ * Force the mode of the controller.
+ *
+ * Forcing the mode is needed for two cases:
+ *
+ * 1) If the dr_mode is set to either HOST or PERIPHERAL we force the
+ * controller to stay in a particular mode regardless of ID pin
+ * changes. We do this usually after a core reset.
+ *
+ * 2) During probe we want to read reset values of the hw
+ * configuration registers that are only available in either host or
+ * device mode. We may need to force the mode if the current mode does
+ * not allow us to access the register in the mode that we want.
+ *
+ * In either case it only makes sense to force the mode if the
+ * controller hardware is OTG capable.
+ *
+ * Checks are done in this function to determine whether doing a force
+ * would be valid or not.
+ *
+ * If a force is done, it requires a 25ms delay to take effect.
+ *
+ * Returns true if the mode was forced.
+ */
+static bool dwc2_force_mode(struct dwc2_hsotg *hsotg, bool host)
+{
+ u32 gusbcfg;
+ u32 set;
+ u32 clear;
+
+ dev_dbg(hsotg->dev, "Forcing mode to %s\n", host ? "host" : "device");
+
+ /*
+ * Force mode has no effect if the hardware is not OTG.
+ */
+ if (!dwc2_hw_is_otg(hsotg))
+ return false;
+
+ /*
+ * If dr_mode is either peripheral or host only, there is no
+ * need to ever force the mode to the opposite mode.
+ */
+ if (WARN_ON(host && hsotg->dr_mode == USB_DR_MODE_PERIPHERAL))
+ return false;
+
+ if (WARN_ON(!host && hsotg->dr_mode == USB_DR_MODE_HOST))
+ return false;
+
+ gusbcfg = dwc2_readl(hsotg->regs + GUSBCFG);
+
+ set = host ? GUSBCFG_FORCEHOSTMODE : GUSBCFG_FORCEDEVMODE;
+ clear = host ? GUSBCFG_FORCEDEVMODE : GUSBCFG_FORCEHOSTMODE;
+
+ gusbcfg &= ~clear;
+ gusbcfg |= set;
+ dwc2_writel(gusbcfg, hsotg->regs + GUSBCFG);
+
+ msleep(25);
+ return true;
+}
+
+/*
+ * Clears the force mode bits.
+ */
+static void dwc2_clear_force_mode(struct dwc2_hsotg *hsotg)
+{
+ u32 gusbcfg;
+
+ gusbcfg = dwc2_readl(hsotg->regs + GUSBCFG);
+ gusbcfg &= ~GUSBCFG_FORCEHOSTMODE;
+ gusbcfg &= ~GUSBCFG_FORCEDEVMODE;
+ dwc2_writel(gusbcfg, hsotg->regs + GUSBCFG);
/*
* NOTE: This long sleep is _very_ important, otherwise the core will
* not stay in host mode after a connector ID change!
*/
- usleep_range(150000, 200000);
+ msleep(25);
+}
+
+/*
+ * Sets or clears force mode based on the dr_mode parameter.
+ */
+void dwc2_force_dr_mode(struct dwc2_hsotg *hsotg)
+{
+ switch (hsotg->dr_mode) {
+ case USB_DR_MODE_HOST:
+ dwc2_force_mode(hsotg, true);
+ break;
+ case USB_DR_MODE_PERIPHERAL:
+ dwc2_force_mode(hsotg, false);
+ break;
+ case USB_DR_MODE_OTG:
+ dwc2_clear_force_mode(hsotg);
+ break;
+ default:
+ dev_warn(hsotg->dev, "%s() Invalid dr_mode=%d\n",
+ __func__, hsotg->dr_mode);
+ break;
+ }
+
+ /*
+ * NOTE: This is required for some rockchip soc based
+ * platforms.
+ */
+ msleep(50);
+}
+/*
+ * Do core a soft reset of the core. Be careful with this because it
+ * resets all the internal state machines of the core.
+ *
+ * Additionally this will apply force mode as per the hsotg->dr_mode
+ * parameter.
+ */
+int dwc2_core_reset_and_force_dr_mode(struct dwc2_hsotg *hsotg)
+{
+ int retval;
+
+ retval = dwc2_core_reset(hsotg);
+ if (retval)
+ return retval;
+
+ dwc2_force_dr_mode(hsotg);
return 0;
}
@@ -553,16 +657,20 @@ static int dwc2_fs_phy_init(struct dwc2_hsotg *hsotg, bool select_phy)
*/
if (select_phy) {
dev_dbg(hsotg->dev, "FS PHY selected\n");
+
usbcfg = dwc2_readl(hsotg->regs + GUSBCFG);
- usbcfg |= GUSBCFG_PHYSEL;
- dwc2_writel(usbcfg, hsotg->regs + GUSBCFG);
+ if (!(usbcfg & GUSBCFG_PHYSEL)) {
+ usbcfg |= GUSBCFG_PHYSEL;
+ dwc2_writel(usbcfg, hsotg->regs + GUSBCFG);
- /* Reset after a PHY select */
- retval = dwc2_core_reset(hsotg);
- if (retval) {
- dev_err(hsotg->dev, "%s() Reset failed, aborting",
- __func__);
- return retval;
+ /* Reset after a PHY select */
+ retval = dwc2_core_reset_and_force_dr_mode(hsotg);
+
+ if (retval) {
+ dev_err(hsotg->dev,
+ "%s: Reset failed, aborting", __func__);
+ return retval;
+ }
}
}
@@ -597,13 +705,13 @@ static int dwc2_fs_phy_init(struct dwc2_hsotg *hsotg, bool select_phy)
static int dwc2_hs_phy_init(struct dwc2_hsotg *hsotg, bool select_phy)
{
- u32 usbcfg;
+ u32 usbcfg, usbcfg_old;
int retval = 0;
if (!select_phy)
return 0;
- usbcfg = dwc2_readl(hsotg->regs + GUSBCFG);
+ usbcfg = usbcfg_old = dwc2_readl(hsotg->regs + GUSBCFG);
/*
* HS PHY parameters. These parameters are preserved during soft reset
@@ -631,14 +739,16 @@ static int dwc2_hs_phy_init(struct dwc2_hsotg *hsotg, bool select_phy)
break;
}
- dwc2_writel(usbcfg, hsotg->regs + GUSBCFG);
+ if (usbcfg != usbcfg_old) {
+ dwc2_writel(usbcfg, hsotg->regs + GUSBCFG);
- /* Reset after setting the PHY parameters */
- retval = dwc2_core_reset(hsotg);
- if (retval) {
- dev_err(hsotg->dev, "%s() Reset failed, aborting",
- __func__);
- return retval;
+ /* Reset after setting the PHY parameters */
+ retval = dwc2_core_reset_and_force_dr_mode(hsotg);
+ if (retval) {
+ dev_err(hsotg->dev,
+ "%s: Reset failed, aborting", __func__);
+ return retval;
+ }
}
return retval;
@@ -765,11 +875,10 @@ static void dwc2_gusbcfg_init(struct dwc2_hsotg *hsotg)
* dwc2_core_init() - Initializes the DWC_otg controller registers and
* prepares the core for device mode or host mode operation
*
- * @hsotg: Programming view of the DWC_otg controller
- * @select_phy: If true then also set the Phy type
- * @irq: If >= 0, the irq to register
+ * @hsotg: Programming view of the DWC_otg controller
+ * @initial_setup: If true then this is the first init for this instance.
*/
-int dwc2_core_init(struct dwc2_hsotg *hsotg, bool select_phy, int irq)
+int dwc2_core_init(struct dwc2_hsotg *hsotg, bool initial_setup)
{
u32 usbcfg, otgctl;
int retval;
@@ -791,18 +900,26 @@ int dwc2_core_init(struct dwc2_hsotg *hsotg, bool select_phy, int irq)
dwc2_writel(usbcfg, hsotg->regs + GUSBCFG);
- /* Reset the Controller */
- retval = dwc2_core_reset(hsotg);
- if (retval) {
- dev_err(hsotg->dev, "%s(): Reset failed, aborting\n",
- __func__);
- return retval;
+ /*
+ * Reset the Controller
+ *
+ * We only need to reset the controller if this is a re-init.
+ * For the first init we know for sure that earlier code reset us (it
+ * needed to in order to properly detect various parameters).
+ */
+ if (!initial_setup) {
+ retval = dwc2_core_reset_and_force_dr_mode(hsotg);
+ if (retval) {
+ dev_err(hsotg->dev, "%s(): Reset failed, aborting\n",
+ __func__);
+ return retval;
+ }
}
/*
* This needs to happen in FS mode before any other programming occurs
*/
- retval = dwc2_phy_init(hsotg, select_phy);
+ retval = dwc2_phy_init(hsotg, initial_setup);
if (retval)
return retval;
@@ -1707,6 +1824,7 @@ void dwc2_hc_start_transfer(struct dwc2_hsotg *hsotg,
u32 hcchar;
u32 hctsiz = 0;
u16 num_packets;
+ u32 ec_mc;
if (dbg_hc(chan))
dev_vdbg(hsotg->dev, "%s()\n", __func__);
@@ -1743,6 +1861,13 @@ void dwc2_hc_start_transfer(struct dwc2_hsotg *hsotg,
hctsiz |= chan->xfer_len << TSIZ_XFERSIZE_SHIFT &
TSIZ_XFERSIZE_MASK;
+
+ /* For split set ec_mc for immediate retries */
+ if (chan->ep_type == USB_ENDPOINT_XFER_INT ||
+ chan->ep_type == USB_ENDPOINT_XFER_ISOC)
+ ec_mc = 3;
+ else
+ ec_mc = 1;
} else {
if (dbg_hc(chan))
dev_vdbg(hsotg->dev, "no split\n");
@@ -1805,6 +1930,9 @@ void dwc2_hc_start_transfer(struct dwc2_hsotg *hsotg,
hctsiz |= chan->xfer_len << TSIZ_XFERSIZE_SHIFT &
TSIZ_XFERSIZE_MASK;
+
+ /* The ec_mc gets the multi_count for non-split */
+ ec_mc = chan->multi_count;
}
chan->start_pkt_count = num_packets;
@@ -1855,8 +1983,7 @@ void dwc2_hc_start_transfer(struct dwc2_hsotg *hsotg,
hcchar = dwc2_readl(hsotg->regs + HCCHAR(chan->hc_num));
hcchar &= ~HCCHAR_MULTICNT_MASK;
- hcchar |= chan->multi_count << HCCHAR_MULTICNT_SHIFT &
- HCCHAR_MULTICNT_MASK;
+ hcchar |= (ec_mc << HCCHAR_MULTICNT_SHIFT) & HCCHAR_MULTICNT_MASK;
dwc2_hc_set_even_odd_frame(hsotg, chan, &hcchar);
if (hcchar & HCCHAR_CHDIS)
@@ -1905,7 +2032,6 @@ void dwc2_hc_start_transfer_ddma(struct dwc2_hsotg *hsotg,
struct dwc2_host_chan *chan)
{
u32 hcchar;
- u32 hc_dma;
u32 hctsiz = 0;
if (chan->do_ping)
@@ -1934,14 +2060,14 @@ void dwc2_hc_start_transfer_ddma(struct dwc2_hsotg *hsotg,
dwc2_writel(hctsiz, hsotg->regs + HCTSIZ(chan->hc_num));
- hc_dma = (u32)chan->desc_list_addr & HCDMA_DMA_ADDR_MASK;
+ dma_sync_single_for_device(hsotg->dev, chan->desc_list_addr,
+ chan->desc_list_sz, DMA_TO_DEVICE);
+
+ dwc2_writel(chan->desc_list_addr, hsotg->regs + HCDMA(chan->hc_num));
- /* Always start from first descriptor */
- hc_dma &= ~HCDMA_CTD_MASK;
- dwc2_writel(hc_dma, hsotg->regs + HCDMA(chan->hc_num));
if (dbg_hc(chan))
- dev_vdbg(hsotg->dev, "Wrote %08x to HCDMA(%d)\n",
- hc_dma, chan->hc_num);
+ dev_vdbg(hsotg->dev, "Wrote %pad to HCDMA(%d)\n",
+ &chan->desc_list_addr, chan->hc_num);
hcchar = dwc2_readl(hsotg->regs + HCCHAR(chan->hc_num));
hcchar &= ~HCCHAR_MULTICNT_MASK;
@@ -2485,6 +2611,29 @@ void dwc2_set_param_dma_desc_enable(struct dwc2_hsotg *hsotg, int val)
hsotg->core_params->dma_desc_enable = val;
}
+void dwc2_set_param_dma_desc_fs_enable(struct dwc2_hsotg *hsotg, int val)
+{
+ int valid = 1;
+
+ if (val > 0 && (hsotg->core_params->dma_enable <= 0 ||
+ !hsotg->hw_params.dma_desc_enable))
+ valid = 0;
+ if (val < 0)
+ valid = 0;
+
+ if (!valid) {
+ if (val >= 0)
+ dev_err(hsotg->dev,
+ "%d invalid for dma_desc_fs_enable parameter. Check HW configuration.\n",
+ val);
+ val = (hsotg->core_params->dma_enable > 0 &&
+ hsotg->hw_params.dma_desc_enable);
+ }
+
+ hsotg->core_params->dma_desc_fs_enable = val;
+ dev_dbg(hsotg->dev, "Setting dma_desc_fs_enable to %d\n", val);
+}
+
void dwc2_set_param_host_support_fs_ls_low_power(struct dwc2_hsotg *hsotg,
int val)
{
@@ -3016,6 +3165,7 @@ void dwc2_set_parameters(struct dwc2_hsotg *hsotg,
dwc2_set_param_otg_cap(hsotg, params->otg_cap);
dwc2_set_param_dma_enable(hsotg, params->dma_enable);
dwc2_set_param_dma_desc_enable(hsotg, params->dma_desc_enable);
+ dwc2_set_param_dma_desc_fs_enable(hsotg, params->dma_desc_fs_enable);
dwc2_set_param_host_support_fs_ls_low_power(hsotg,
params->host_support_fs_ls_low_power);
dwc2_set_param_enable_dynamic_fifo(hsotg,
@@ -3052,6 +3202,79 @@ void dwc2_set_parameters(struct dwc2_hsotg *hsotg,
dwc2_set_param_hibernation(hsotg, params->hibernation);
}
+/*
+ * Forces either host or device mode if the controller is not
+ * currently in that mode.
+ *
+ * Returns true if the mode was forced.
+ */
+static bool dwc2_force_mode_if_needed(struct dwc2_hsotg *hsotg, bool host)
+{
+ if (host && dwc2_is_host_mode(hsotg))
+ return false;
+ else if (!host && dwc2_is_device_mode(hsotg))
+ return false;
+
+ return dwc2_force_mode(hsotg, host);
+}
+
+/*
+ * Gets host hardware parameters. Forces host mode if not currently in
+ * host mode. Should be called immediately after a core soft reset in
+ * order to get the reset values.
+ */
+static void dwc2_get_host_hwparams(struct dwc2_hsotg *hsotg)
+{
+ struct dwc2_hw_params *hw = &hsotg->hw_params;
+ u32 gnptxfsiz;
+ u32 hptxfsiz;
+ bool forced;
+
+ if (hsotg->dr_mode == USB_DR_MODE_PERIPHERAL)
+ return;
+
+ forced = dwc2_force_mode_if_needed(hsotg, true);
+
+ gnptxfsiz = dwc2_readl(hsotg->regs + GNPTXFSIZ);
+ hptxfsiz = dwc2_readl(hsotg->regs + HPTXFSIZ);
+ dev_dbg(hsotg->dev, "gnptxfsiz=%08x\n", gnptxfsiz);
+ dev_dbg(hsotg->dev, "hptxfsiz=%08x\n", hptxfsiz);
+
+ if (forced)
+ dwc2_clear_force_mode(hsotg);
+
+ hw->host_nperio_tx_fifo_size = (gnptxfsiz & FIFOSIZE_DEPTH_MASK) >>
+ FIFOSIZE_DEPTH_SHIFT;
+ hw->host_perio_tx_fifo_size = (hptxfsiz & FIFOSIZE_DEPTH_MASK) >>
+ FIFOSIZE_DEPTH_SHIFT;
+}
+
+/*
+ * Gets device hardware parameters. Forces device mode if not
+ * currently in device mode. Should be called immediately after a core
+ * soft reset in order to get the reset values.
+ */
+static void dwc2_get_dev_hwparams(struct dwc2_hsotg *hsotg)
+{
+ struct dwc2_hw_params *hw = &hsotg->hw_params;
+ bool forced;
+ u32 gnptxfsiz;
+
+ if (hsotg->dr_mode == USB_DR_MODE_HOST)
+ return;
+
+ forced = dwc2_force_mode_if_needed(hsotg, false);
+
+ gnptxfsiz = dwc2_readl(hsotg->regs + GNPTXFSIZ);
+ dev_dbg(hsotg->dev, "gnptxfsiz=%08x\n", gnptxfsiz);
+
+ if (forced)
+ dwc2_clear_force_mode(hsotg);
+
+ hw->dev_nperio_tx_fifo_size = (gnptxfsiz & FIFOSIZE_DEPTH_MASK) >>
+ FIFOSIZE_DEPTH_SHIFT;
+}
+
/**
* During device initialization, read various hardware configuration
* registers and interpret the contents.
@@ -3061,8 +3284,7 @@ int dwc2_get_hwparams(struct dwc2_hsotg *hsotg)
struct dwc2_hw_params *hw = &hsotg->hw_params;
unsigned width;
u32 hwcfg1, hwcfg2, hwcfg3, hwcfg4;
- u32 hptxfsiz, grxfsiz, gnptxfsiz;
- u32 gusbcfg;
+ u32 grxfsiz;
/*
* Attempt to ensure this device is really a DWC_otg Controller.
@@ -3094,20 +3316,16 @@ int dwc2_get_hwparams(struct dwc2_hsotg *hsotg)
dev_dbg(hsotg->dev, "hwcfg4=%08x\n", hwcfg4);
dev_dbg(hsotg->dev, "grxfsiz=%08x\n", grxfsiz);
- /* Force host mode to get HPTXFSIZ / GNPTXFSIZ exact power on value */
- gusbcfg = dwc2_readl(hsotg->regs + GUSBCFG);
- gusbcfg |= GUSBCFG_FORCEHOSTMODE;
- dwc2_writel(gusbcfg, hsotg->regs + GUSBCFG);
- usleep_range(100000, 150000);
+ /*
+ * Host specific hardware parameters. Reading these parameters
+ * requires the controller to be in host mode. The mode will
+ * be forced, if necessary, to read these values.
+ */
+ dwc2_get_host_hwparams(hsotg);
+ dwc2_get_dev_hwparams(hsotg);
- gnptxfsiz = dwc2_readl(hsotg->regs + GNPTXFSIZ);
- hptxfsiz = dwc2_readl(hsotg->regs + HPTXFSIZ);
- dev_dbg(hsotg->dev, "gnptxfsiz=%08x\n", gnptxfsiz);
- dev_dbg(hsotg->dev, "hptxfsiz=%08x\n", hptxfsiz);
- gusbcfg = dwc2_readl(hsotg->regs + GUSBCFG);
- gusbcfg &= ~GUSBCFG_FORCEHOSTMODE;
- dwc2_writel(gusbcfg, hsotg->regs + GUSBCFG);
- usleep_range(100000, 150000);
+ /* hwcfg1 */
+ hw->dev_ep_dirs = hwcfg1;
/* hwcfg2 */
hw->op_mode = (hwcfg2 & GHWCFG2_OP_MODE_MASK) >>
@@ -3163,10 +3381,6 @@ int dwc2_get_hwparams(struct dwc2_hsotg *hsotg)
/* fifo sizes */
hw->host_rx_fifo_size = (grxfsiz & GRXFSIZ_DEPTH_MASK) >>
GRXFSIZ_DEPTH_SHIFT;
- hw->host_nperio_tx_fifo_size = (gnptxfsiz & FIFOSIZE_DEPTH_MASK) >>
- FIFOSIZE_DEPTH_SHIFT;
- hw->host_perio_tx_fifo_size = (hptxfsiz & FIFOSIZE_DEPTH_MASK) >>
- FIFOSIZE_DEPTH_SHIFT;
dev_dbg(hsotg->dev, "Detected values from hardware:\n");
dev_dbg(hsotg->dev, " op_mode=%d\n",
@@ -3275,6 +3489,43 @@ void dwc2_disable_global_interrupts(struct dwc2_hsotg *hsotg)
dwc2_writel(ahbcfg, hsotg->regs + GAHBCFG);
}
+/* Returns the controller's GHWCFG2.OTG_MODE. */
+unsigned dwc2_op_mode(struct dwc2_hsotg *hsotg)
+{
+ u32 ghwcfg2 = dwc2_readl(hsotg->regs + GHWCFG2);
+
+ return (ghwcfg2 & GHWCFG2_OP_MODE_MASK) >>
+ GHWCFG2_OP_MODE_SHIFT;
+}
+
+/* Returns true if the controller is capable of DRD. */
+bool dwc2_hw_is_otg(struct dwc2_hsotg *hsotg)
+{
+ unsigned op_mode = dwc2_op_mode(hsotg);
+
+ return (op_mode == GHWCFG2_OP_MODE_HNP_SRP_CAPABLE) ||
+ (op_mode == GHWCFG2_OP_MODE_SRP_ONLY_CAPABLE) ||
+ (op_mode == GHWCFG2_OP_MODE_NO_HNP_SRP_CAPABLE);
+}
+
+/* Returns true if the controller is host-only. */
+bool dwc2_hw_is_host(struct dwc2_hsotg *hsotg)
+{
+ unsigned op_mode = dwc2_op_mode(hsotg);
+
+ return (op_mode == GHWCFG2_OP_MODE_SRP_CAPABLE_HOST) ||
+ (op_mode == GHWCFG2_OP_MODE_NO_SRP_CAPABLE_HOST);
+}
+
+/* Returns true if the controller is device-only. */
+bool dwc2_hw_is_device(struct dwc2_hsotg *hsotg)
+{
+ unsigned op_mode = dwc2_op_mode(hsotg);
+
+ return (op_mode == GHWCFG2_OP_MODE_SRP_CAPABLE_DEVICE) ||
+ (op_mode == GHWCFG2_OP_MODE_NO_SRP_CAPABLE_DEVICE);
+}
+
MODULE_DESCRIPTION("DESIGNWARE HS OTG Core");
MODULE_AUTHOR("Synopsys, Inc.");
MODULE_LICENSE("Dual BSD/GPL");