diff options
Diffstat (limited to 'drivers/usb/dwc3')
-rw-r--r-- | drivers/usb/dwc3/core.c | 102 | ||||
-rw-r--r-- | drivers/usb/dwc3/core.h | 11 | ||||
-rw-r--r-- | drivers/usb/dwc3/debugfs.c | 13 | ||||
-rw-r--r-- | drivers/usb/dwc3/dwc3-keystone.c | 5 | ||||
-rw-r--r-- | drivers/usb/dwc3/dwc3-of-simple.c | 9 | ||||
-rw-r--r-- | drivers/usb/dwc3/dwc3-omap.c | 12 | ||||
-rw-r--r-- | drivers/usb/dwc3/dwc3-pci.c | 2 | ||||
-rw-r--r-- | drivers/usb/dwc3/ep0.c | 9 | ||||
-rw-r--r-- | drivers/usb/dwc3/gadget.c | 47 |
9 files changed, 138 insertions, 72 deletions
diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c index de5e01f41..34277ced2 100644 --- a/drivers/usb/dwc3/core.c +++ b/drivers/usb/dwc3/core.c @@ -67,23 +67,9 @@ void dwc3_set_mode(struct dwc3 *dwc, u32 mode) static int dwc3_core_soft_reset(struct dwc3 *dwc) { u32 reg; + int retries = 1000; int ret; - /* Before Resetting PHY, put Core in Reset */ - reg = dwc3_readl(dwc->regs, DWC3_GCTL); - reg |= DWC3_GCTL_CORESOFTRESET; - dwc3_writel(dwc->regs, DWC3_GCTL, reg); - - /* Assert USB3 PHY reset */ - reg = dwc3_readl(dwc->regs, DWC3_GUSB3PIPECTL(0)); - reg |= DWC3_GUSB3PIPECTL_PHYSOFTRST; - dwc3_writel(dwc->regs, DWC3_GUSB3PIPECTL(0), reg); - - /* Assert USB2 PHY reset */ - reg = dwc3_readl(dwc->regs, DWC3_GUSB2PHYCFG(0)); - reg |= DWC3_GUSB2PHYCFG_PHYSOFTRST; - dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(0), reg); - usb_phy_init(dwc->usb2_phy); usb_phy_init(dwc->usb3_phy); ret = phy_init(dwc->usb2_generic_phy); @@ -95,26 +81,28 @@ static int dwc3_core_soft_reset(struct dwc3 *dwc) phy_exit(dwc->usb2_generic_phy); return ret; } - mdelay(100); - /* Clear USB3 PHY reset */ - reg = dwc3_readl(dwc->regs, DWC3_GUSB3PIPECTL(0)); - reg &= ~DWC3_GUSB3PIPECTL_PHYSOFTRST; - dwc3_writel(dwc->regs, DWC3_GUSB3PIPECTL(0), reg); + /* + * We're resetting only the device side because, if we're in host mode, + * XHCI driver will reset the host block. If dwc3 was configured for + * host-only mode, then we can return early. + */ + if (dwc->dr_mode == USB_DR_MODE_HOST) + return 0; - /* Clear USB2 PHY reset */ - reg = dwc3_readl(dwc->regs, DWC3_GUSB2PHYCFG(0)); - reg &= ~DWC3_GUSB2PHYCFG_PHYSOFTRST; - dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(0), reg); + reg = dwc3_readl(dwc->regs, DWC3_DCTL); + reg |= DWC3_DCTL_CSFTRST; + dwc3_writel(dwc->regs, DWC3_DCTL, reg); - mdelay(100); + do { + reg = dwc3_readl(dwc->regs, DWC3_DCTL); + if (!(reg & DWC3_DCTL_CSFTRST)) + return 0; - /* After PHYs are stable we can take Core out of reset state */ - reg = dwc3_readl(dwc->regs, DWC3_GCTL); - reg &= ~DWC3_GCTL_CORESOFTRESET; - dwc3_writel(dwc->regs, DWC3_GCTL, reg); + udelay(1); + } while (--retries); - return 0; + return -ETIMEDOUT; } /** @@ -962,10 +950,6 @@ static int dwc3_probe(struct platform_device *pdev) fladj = pdata->fladj_value; } - /* default to superspeed if no maximum_speed passed */ - if (dwc->maximum_speed == USB_SPEED_UNKNOWN) - dwc->maximum_speed = USB_SPEED_SUPER; - dwc->lpm_nyet_threshold = lpm_nyet_threshold; dwc->tx_de_emphasis = tx_de_emphasis; @@ -1016,6 +1000,33 @@ static int dwc3_probe(struct platform_device *pdev) goto err1; } + /* Check the maximum_speed parameter */ + switch (dwc->maximum_speed) { + case USB_SPEED_LOW: + case USB_SPEED_FULL: + case USB_SPEED_HIGH: + case USB_SPEED_SUPER: + case USB_SPEED_SUPER_PLUS: + break; + default: + dev_err(dev, "invalid maximum_speed parameter %d\n", + dwc->maximum_speed); + /* fall through */ + case USB_SPEED_UNKNOWN: + /* default to superspeed */ + dwc->maximum_speed = USB_SPEED_SUPER; + + /* + * default to superspeed plus if we are capable. + */ + if (dwc3_is_usb31(dwc) && + (DWC3_GHWPARAMS3_SSPHY_IFC(dwc->hwparams.hwparams3) == + DWC3_GHWPARAMS3_SSPHY_IFC_GEN2)) + dwc->maximum_speed = USB_SPEED_SUPER_PLUS; + + break; + } + /* Adjust Frame Length */ dwc3_frame_length_adjustment(dwc, fladj); @@ -1139,6 +1150,11 @@ static int dwc3_suspend(struct device *dev) phy_exit(dwc->usb2_generic_phy); phy_exit(dwc->usb3_generic_phy); + usb_phy_set_suspend(dwc->usb2_phy, 1); + usb_phy_set_suspend(dwc->usb3_phy, 1); + WARN_ON(phy_power_off(dwc->usb2_generic_phy) < 0); + WARN_ON(phy_power_off(dwc->usb3_generic_phy) < 0); + pinctrl_pm_select_sleep_state(dev); return 0; @@ -1152,11 +1168,21 @@ static int dwc3_resume(struct device *dev) pinctrl_pm_select_default_state(dev); + usb_phy_set_suspend(dwc->usb2_phy, 0); + usb_phy_set_suspend(dwc->usb3_phy, 0); + ret = phy_power_on(dwc->usb2_generic_phy); + if (ret < 0) + return ret; + + ret = phy_power_on(dwc->usb3_generic_phy); + if (ret < 0) + goto err_usb2phy_power; + usb_phy_init(dwc->usb3_phy); usb_phy_init(dwc->usb2_phy); ret = phy_init(dwc->usb2_generic_phy); if (ret < 0) - return ret; + goto err_usb3phy_power; ret = phy_init(dwc->usb3_generic_phy); if (ret < 0) @@ -1189,6 +1215,12 @@ static int dwc3_resume(struct device *dev) err_usb2phy_init: phy_exit(dwc->usb2_generic_phy); +err_usb3phy_power: + phy_power_off(dwc->usb3_generic_phy); + +err_usb2phy_power: + phy_power_off(dwc->usb2_generic_phy); + return ret; } diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h index e4f8b90d9..6254b2ff9 100644 --- a/drivers/usb/dwc3/core.h +++ b/drivers/usb/dwc3/core.h @@ -223,7 +223,8 @@ /* Global HWPARAMS3 Register */ #define DWC3_GHWPARAMS3_SSPHY_IFC(n) ((n) & 3) #define DWC3_GHWPARAMS3_SSPHY_IFC_DIS 0 -#define DWC3_GHWPARAMS3_SSPHY_IFC_ENA 1 +#define DWC3_GHWPARAMS3_SSPHY_IFC_GEN1 1 +#define DWC3_GHWPARAMS3_SSPHY_IFC_GEN2 2 /* DWC_usb31 only */ #define DWC3_GHWPARAMS3_HSPHY_IFC(n) (((n) & (3 << 2)) >> 2) #define DWC3_GHWPARAMS3_HSPHY_IFC_DIS 0 #define DWC3_GHWPARAMS3_HSPHY_IFC_UTMI 1 @@ -249,6 +250,7 @@ #define DWC3_DCFG_DEVADDR_MASK DWC3_DCFG_DEVADDR(0x7f) #define DWC3_DCFG_SPEED_MASK (7 << 0) +#define DWC3_DCFG_SUPERSPEED_PLUS (5 << 0) /* DWC_usb31 only */ #define DWC3_DCFG_SUPERSPEED (4 << 0) #define DWC3_DCFG_HIGHSPEED (0 << 0) #define DWC3_DCFG_FULLSPEED2 (1 << 0) @@ -339,6 +341,7 @@ #define DWC3_DSTS_CONNECTSPD (7 << 0) +#define DWC3_DSTS_SUPERSPEED_PLUS (5 << 0) /* DWC_usb31 only */ #define DWC3_DSTS_SUPERSPEED (4 << 0) #define DWC3_DSTS_HIGHSPEED (0 << 0) #define DWC3_DSTS_FULLSPEED2 (1 << 0) @@ -1024,6 +1027,12 @@ struct dwc3_gadget_ep_cmd_params { void dwc3_set_mode(struct dwc3 *dwc, u32 mode); int dwc3_gadget_resize_tx_fifos(struct dwc3 *dwc); +/* check whether we are on the DWC_usb31 core */ +static inline bool dwc3_is_usb31(struct dwc3 *dwc) +{ + return !!(dwc->revision & DWC3_REVISION_IS_DWC31); +} + #if IS_ENABLED(CONFIG_USB_DWC3_HOST) || IS_ENABLED(CONFIG_USB_DWC3_DUAL_ROLE) int dwc3_host_init(struct dwc3 *dwc); void dwc3_host_exit(struct dwc3 *dwc); diff --git a/drivers/usb/dwc3/debugfs.c b/drivers/usb/dwc3/debugfs.c index 9ac37fe1b..cebf9e38b 100644 --- a/drivers/usb/dwc3/debugfs.c +++ b/drivers/usb/dwc3/debugfs.c @@ -645,7 +645,7 @@ int dwc3_debugfs_init(struct dwc3 *dwc) file = debugfs_create_regset32("regdump", S_IRUGO, root, dwc->regset); if (!file) { ret = -ENOMEM; - goto err1; + goto err2; } if (IS_ENABLED(CONFIG_USB_DWC3_DUAL_ROLE)) { @@ -653,7 +653,7 @@ int dwc3_debugfs_init(struct dwc3 *dwc) dwc, &dwc3_mode_fops); if (!file) { ret = -ENOMEM; - goto err1; + goto err2; } } @@ -663,19 +663,22 @@ int dwc3_debugfs_init(struct dwc3 *dwc) dwc, &dwc3_testmode_fops); if (!file) { ret = -ENOMEM; - goto err1; + goto err2; } file = debugfs_create_file("link_state", S_IRUGO | S_IWUSR, root, dwc, &dwc3_link_state_fops); if (!file) { ret = -ENOMEM; - goto err1; + goto err2; } } return 0; +err2: + kfree(dwc->regset); + err1: debugfs_remove_recursive(root); @@ -686,5 +689,5 @@ err0: void dwc3_debugfs_exit(struct dwc3 *dwc) { debugfs_remove_recursive(dwc->root); - dwc->root = NULL; + kfree(dwc->regset); } diff --git a/drivers/usb/dwc3/dwc3-keystone.c b/drivers/usb/dwc3/dwc3-keystone.c index 2be268d24..72664700b 100644 --- a/drivers/usb/dwc3/dwc3-keystone.c +++ b/drivers/usb/dwc3/dwc3-keystone.c @@ -39,8 +39,6 @@ #define USBSS_IRQ_COREIRQ_EN BIT(0) #define USBSS_IRQ_COREIRQ_CLR BIT(0) -static u64 kdwc3_dma_mask; - struct dwc3_keystone { struct device *dev; struct clk *clk; @@ -108,9 +106,6 @@ static int kdwc3_probe(struct platform_device *pdev) if (IS_ERR(kdwc->usbss)) return PTR_ERR(kdwc->usbss); - kdwc3_dma_mask = dma_get_mask(dev); - dev->dma_mask = &kdwc3_dma_mask; - kdwc->clk = devm_clk_get(kdwc->dev, "usb"); error = clk_prepare_enable(kdwc->clk); diff --git a/drivers/usb/dwc3/dwc3-of-simple.c b/drivers/usb/dwc3/dwc3-of-simple.c index 9c9f74155..974335377 100644 --- a/drivers/usb/dwc3/dwc3-of-simple.c +++ b/drivers/usb/dwc3/dwc3-of-simple.c @@ -42,6 +42,7 @@ static int dwc3_of_simple_probe(struct platform_device *pdev) struct device *dev = &pdev->dev; struct device_node *np = dev->of_node; + unsigned int count; int ret; int i; @@ -49,11 +50,11 @@ static int dwc3_of_simple_probe(struct platform_device *pdev) if (!simple) return -ENOMEM; - ret = of_clk_get_parent_count(np); - if (ret < 0) - return ret; + count = of_clk_get_parent_count(np); + if (!count) + return -ENOENT; - simple->num_clocks = ret; + simple->num_clocks = count; simple->clks = devm_kcalloc(dev, simple->num_clocks, sizeof(struct clk *), GFP_KERNEL); diff --git a/drivers/usb/dwc3/dwc3-omap.c b/drivers/usb/dwc3/dwc3-omap.c index 22e9606d8..55da2c7f7 100644 --- a/drivers/usb/dwc3/dwc3-omap.c +++ b/drivers/usb/dwc3/dwc3-omap.c @@ -496,7 +496,7 @@ static int dwc3_omap_probe(struct platform_device *pdev) ret = pm_runtime_get_sync(dev); if (ret < 0) { dev_err(dev, "get_sync failed with err %d\n", ret); - goto err0; + goto err1; } dwc3_omap_map_offset(omap); @@ -516,28 +516,24 @@ static int dwc3_omap_probe(struct platform_device *pdev) ret = dwc3_omap_extcon_register(omap); if (ret < 0) - goto err2; + goto err1; ret = of_platform_populate(node, NULL, NULL, dev); if (ret) { dev_err(&pdev->dev, "failed to create dwc3 core\n"); - goto err3; + goto err2; } dwc3_omap_enable_irqs(omap); return 0; -err3: +err2: extcon_unregister_notifier(omap->edev, EXTCON_USB, &omap->vbus_nb); extcon_unregister_notifier(omap->edev, EXTCON_USB_HOST, &omap->id_nb); -err2: - dwc3_omap_disable_irqs(omap); err1: pm_runtime_put_sync(dev); - -err0: pm_runtime_disable(dev); return ret; diff --git a/drivers/usb/dwc3/dwc3-pci.c b/drivers/usb/dwc3/dwc3-pci.c index 009d83048..adc1e8a62 100644 --- a/drivers/usb/dwc3/dwc3-pci.c +++ b/drivers/usb/dwc3/dwc3-pci.c @@ -35,6 +35,7 @@ #define PCI_DEVICE_ID_INTEL_SPTLP 0x9d30 #define PCI_DEVICE_ID_INTEL_SPTH 0xa130 #define PCI_DEVICE_ID_INTEL_BXT 0x0aaa +#define PCI_DEVICE_ID_INTEL_BXT_M 0x1aaa #define PCI_DEVICE_ID_INTEL_APL 0x5aaa static const struct acpi_gpio_params reset_gpios = { 0, 0, false }; @@ -213,6 +214,7 @@ static const struct pci_device_id dwc3_pci_id_table[] = { { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_SPTLP), }, { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_SPTH), }, { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_BXT), }, + { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_BXT_M), }, { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_APL), }, { PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_NL_USB), }, { } /* Terminating Entry */ diff --git a/drivers/usb/dwc3/ep0.c b/drivers/usb/dwc3/ep0.c index 8d6b75c2f..eca2e6d8e 100644 --- a/drivers/usb/dwc3/ep0.c +++ b/drivers/usb/dwc3/ep0.c @@ -356,7 +356,8 @@ static int dwc3_ep0_handle_status(struct dwc3 *dwc, */ usb_status |= dwc->gadget.is_selfpowered; - if (dwc->speed == DWC3_DSTS_SUPERSPEED) { + if ((dwc->speed == DWC3_DSTS_SUPERSPEED) || + (dwc->speed == DWC3_DSTS_SUPERSPEED_PLUS)) { reg = dwc3_readl(dwc->regs, DWC3_DCTL); if (reg & DWC3_DCTL_INITU1ENA) usb_status |= 1 << USB_DEV_STAT_U1_ENABLED; @@ -426,7 +427,8 @@ static int dwc3_ep0_handle_feature(struct dwc3 *dwc, case USB_DEVICE_U1_ENABLE: if (state != USB_STATE_CONFIGURED) return -EINVAL; - if (dwc->speed != DWC3_DSTS_SUPERSPEED) + if ((dwc->speed != DWC3_DSTS_SUPERSPEED) && + (dwc->speed != DWC3_DSTS_SUPERSPEED_PLUS)) return -EINVAL; reg = dwc3_readl(dwc->regs, DWC3_DCTL); @@ -440,7 +442,8 @@ static int dwc3_ep0_handle_feature(struct dwc3 *dwc, case USB_DEVICE_U2_ENABLE: if (state != USB_STATE_CONFIGURED) return -EINVAL; - if (dwc->speed != DWC3_DSTS_SUPERSPEED) + if ((dwc->speed != DWC3_DSTS_SUPERSPEED) && + (dwc->speed != DWC3_DSTS_SUPERSPEED_PLUS)) return -EINVAL; reg = dwc3_readl(dwc->regs, DWC3_DCTL); diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c index 2363bad45..8e4a1b195 100644 --- a/drivers/usb/dwc3/gadget.c +++ b/drivers/usb/dwc3/gadget.c @@ -463,7 +463,7 @@ static int dwc3_gadget_set_ep_config(struct dwc3 *dwc, struct dwc3_ep *dep, | DWC3_DEPCFG_MAX_PACKET_SIZE(usb_endpoint_maxp(desc)); /* Burst size is only needed in SuperSpeed mode */ - if (dwc->gadget.speed == USB_SPEED_SUPER) { + if (dwc->gadget.speed >= USB_SPEED_SUPER) { u32 burst = dep->endpoint.maxburst - 1; params.param0 |= DWC3_DEPCFG_BURST_SIZE(burst); @@ -568,7 +568,7 @@ static int __dwc3_gadget_ep_enable(struct dwc3_ep *dep, dwc3_writel(dwc->regs, DWC3_DALEPENA, reg); if (!usb_endpoint_xfer_isoc(desc)) - return 0; + goto out; /* Link TRB for ISOC. The HWO bit is never reset */ trb_st_hw = &dep->trb_pool[0]; @@ -582,9 +582,10 @@ static int __dwc3_gadget_ep_enable(struct dwc3_ep *dep, trb_link->ctrl |= DWC3_TRB_CTRL_HWO; } +out: switch (usb_endpoint_type(desc)) { case USB_ENDPOINT_XFER_CONTROL: - strlcat(dep->name, "-control", sizeof(dep->name)); + /* don't change name */ break; case USB_ENDPOINT_XFER_ISOC: strlcat(dep->name, "-isoc", sizeof(dep->name)); @@ -1441,7 +1442,8 @@ static int dwc3_gadget_wakeup(struct usb_gadget *g) reg = dwc3_readl(dwc->regs, DWC3_DSTS); speed = reg & DWC3_DSTS_CONNECTSPD; - if (speed == DWC3_DSTS_SUPERSPEED) { + if ((speed == DWC3_DSTS_SUPERSPEED) || + (speed == DWC3_DSTS_SUPERSPEED_PLUS)) { dwc3_trace(trace_dwc3_gadget, "no wakeup on SuperSpeed\n"); ret = -EINVAL; goto out; @@ -1666,10 +1668,16 @@ static int dwc3_gadget_start(struct usb_gadget *g, case USB_SPEED_HIGH: reg |= DWC3_DSTS_HIGHSPEED; break; - case USB_SPEED_SUPER: /* FALLTHROUGH */ - case USB_SPEED_UNKNOWN: /* FALTHROUGH */ + case USB_SPEED_SUPER_PLUS: + reg |= DWC3_DSTS_SUPERSPEED_PLUS; + break; default: - reg |= DWC3_DSTS_SUPERSPEED; + dev_err(dwc->dev, "invalid dwc->maximum_speed (%d)\n", + dwc->maximum_speed); + /* fall through */ + case USB_SPEED_SUPER: + reg |= DWC3_DCFG_SUPERSPEED; + break; } } dwc3_writel(dwc->regs, DWC3_DCFG, reg); @@ -2340,7 +2348,8 @@ static void dwc3_update_ram_clk_sel(struct dwc3 *dwc, u32 speed) * this. Maybe it becomes part of the power saving plan. */ - if (speed != DWC3_DSTS_SUPERSPEED) + if ((speed != DWC3_DSTS_SUPERSPEED) && + (speed != DWC3_DSTS_SUPERSPEED_PLUS)) return; /* @@ -2369,6 +2378,11 @@ static void dwc3_gadget_conndone_interrupt(struct dwc3 *dwc) dwc3_update_ram_clk_sel(dwc, speed); switch (speed) { + case DWC3_DCFG_SUPERSPEED_PLUS: + dwc3_gadget_ep0_desc.wMaxPacketSize = cpu_to_le16(512); + dwc->gadget.ep0->maxpacket = 512; + dwc->gadget.speed = USB_SPEED_SUPER_PLUS; + break; case DWC3_DCFG_SUPERSPEED: /* * WORKAROUND: DWC3 revisions <1.90a have an issue which @@ -2410,8 +2424,9 @@ static void dwc3_gadget_conndone_interrupt(struct dwc3 *dwc) /* Enable USB2 LPM Capability */ - if ((dwc->revision > DWC3_REVISION_194A) - && (speed != DWC3_DCFG_SUPERSPEED)) { + if ((dwc->revision > DWC3_REVISION_194A) && + (speed != DWC3_DCFG_SUPERSPEED) && + (speed != DWC3_DCFG_SUPERSPEED_PLUS)) { reg = dwc3_readl(dwc->regs, DWC3_DCFG); reg |= DWC3_DCFG_LPM_CAP; dwc3_writel(dwc->regs, DWC3_DCFG, reg); @@ -2473,7 +2488,11 @@ static void dwc3_gadget_wakeup_interrupt(struct dwc3 *dwc) * implemented. */ - dwc->gadget_driver->resume(&dwc->gadget); + if (dwc->gadget_driver && dwc->gadget_driver->resume) { + spin_unlock(&dwc->lock); + dwc->gadget_driver->resume(&dwc->gadget); + spin_lock(&dwc->lock); + } } static void dwc3_gadget_linksts_change_interrupt(struct dwc3 *dwc, @@ -2917,6 +2936,9 @@ void dwc3_gadget_exit(struct dwc3 *dwc) int dwc3_gadget_suspend(struct dwc3 *dwc) { + if (!dwc->gadget_driver) + return 0; + if (dwc->pullups_connected) { dwc3_gadget_disable_irq(dwc); dwc3_gadget_run_stop(dwc, true, true); @@ -2935,6 +2957,9 @@ int dwc3_gadget_resume(struct dwc3 *dwc) struct dwc3_ep *dep; int ret; + if (!dwc->gadget_driver) + return 0; + /* Start with SuperSpeed Default */ dwc3_gadget_ep0_desc.wMaxPacketSize = cpu_to_le16(512); |