diff options
Diffstat (limited to 'drivers/usb/host/bcma-hcd.c')
| -rw-r--r-- | drivers/usb/host/bcma-hcd.c | 333 |
1 files changed, 333 insertions, 0 deletions
diff --git a/drivers/usb/host/bcma-hcd.c b/drivers/usb/host/bcma-hcd.c new file mode 100644 index 000000000..526cfab41 --- /dev/null +++ b/drivers/usb/host/bcma-hcd.c @@ -0,0 +1,333 @@ +/* + * Broadcom specific Advanced Microcontroller Bus + * Broadcom USB-core driver (BCMA bus glue) + * + * Copyright 2011-2012 Hauke Mehrtens <hauke@hauke-m.de> + * + * Based on ssb-ohci driver + * Copyright 2007 Michael Buesch <m@bues.ch> + * + * Derived from the OHCI-PCI driver + * Copyright 1999 Roman Weissgaerber + * Copyright 2000-2002 David Brownell + * Copyright 1999 Linus Torvalds + * Copyright 1999 Gregory P. Smith + * + * Derived from the USBcore related parts of Broadcom-SB + * Copyright 2005-2011 Broadcom Corporation + * + * Licensed under the GNU/GPL. See COPYING for details. + */ +#include <linux/bcma/bcma.h> +#include <linux/delay.h> +#include <linux/platform_device.h> +#include <linux/module.h> +#include <linux/slab.h> +#include <linux/usb/ehci_pdriver.h> +#include <linux/usb/ohci_pdriver.h> + +MODULE_AUTHOR("Hauke Mehrtens"); +MODULE_DESCRIPTION("Common USB driver for BCMA Bus"); +MODULE_LICENSE("GPL"); + +struct bcma_hcd_device { + struct platform_device *ehci_dev; + struct platform_device *ohci_dev; +}; + +/* Wait for bitmask in a register to get set or cleared. + * timeout is in units of ten-microseconds. + */ +static int bcma_wait_bits(struct bcma_device *dev, u16 reg, u32 bitmask, + int timeout) +{ + int i; + u32 val; + + for (i = 0; i < timeout; i++) { + val = bcma_read32(dev, reg); + if ((val & bitmask) == bitmask) + return 0; + udelay(10); + } + + return -ETIMEDOUT; +} + +static void bcma_hcd_4716wa(struct bcma_device *dev) +{ +#ifdef CONFIG_BCMA_DRIVER_MIPS + /* Work around for 4716 failures. */ + if (dev->bus->chipinfo.id == 0x4716) { + u32 tmp; + + tmp = bcma_cpu_clock(&dev->bus->drv_mips); + if (tmp >= 480000000) + tmp = 0x1846b; /* set CDR to 0x11(fast) */ + else if (tmp == 453000000) + tmp = 0x1046b; /* set CDR to 0x10(slow) */ + else + tmp = 0; + + /* Change Shim mdio control reg to fix host not acking at + * high frequencies + */ + if (tmp) { + bcma_write32(dev, 0x524, 0x1); /* write sel to enable */ + udelay(500); + + bcma_write32(dev, 0x524, tmp); + udelay(500); + bcma_write32(dev, 0x524, 0x4ab); + udelay(500); + bcma_read32(dev, 0x528); + bcma_write32(dev, 0x528, 0x80000000); + } + } +#endif /* CONFIG_BCMA_DRIVER_MIPS */ +} + +/* based on arch/mips/brcm-boards/bcm947xx/pcibios.c */ +static void bcma_hcd_init_chip(struct bcma_device *dev) +{ + u32 tmp; + + /* + * USB 2.0 special considerations: + * + * 1. Since the core supports both OHCI and EHCI functions, it must + * only be reset once. + * + * 2. In addition to the standard SI reset sequence, the Host Control + * Register must be programmed to bring the USB core and various + * phy components out of reset. + */ + if (!bcma_core_is_enabled(dev)) { + bcma_core_enable(dev, 0); + mdelay(10); + if (dev->id.rev >= 5) { + /* Enable Misc PLL */ + tmp = bcma_read32(dev, 0x1e0); + tmp |= 0x100; + bcma_write32(dev, 0x1e0, tmp); + if (bcma_wait_bits(dev, 0x1e0, 1 << 24, 100)) + printk(KERN_EMERG "Failed to enable misc PPL!\n"); + + /* Take out of resets */ + bcma_write32(dev, 0x200, 0x4ff); + udelay(25); + bcma_write32(dev, 0x200, 0x6ff); + udelay(25); + + /* Make sure digital and AFE are locked in USB PHY */ + bcma_write32(dev, 0x524, 0x6b); + udelay(50); + tmp = bcma_read32(dev, 0x524); + udelay(50); + bcma_write32(dev, 0x524, 0xab); + udelay(50); + tmp = bcma_read32(dev, 0x524); + udelay(50); + bcma_write32(dev, 0x524, 0x2b); + udelay(50); + tmp = bcma_read32(dev, 0x524); + udelay(50); + bcma_write32(dev, 0x524, 0x10ab); + udelay(50); + tmp = bcma_read32(dev, 0x524); + + if (bcma_wait_bits(dev, 0x528, 0xc000, 10000)) { + tmp = bcma_read32(dev, 0x528); + printk(KERN_EMERG + "USB20H mdio_rddata 0x%08x\n", tmp); + } + bcma_write32(dev, 0x528, 0x80000000); + tmp = bcma_read32(dev, 0x314); + udelay(265); + bcma_write32(dev, 0x200, 0x7ff); + udelay(10); + + /* Take USB and HSIC out of non-driving modes */ + bcma_write32(dev, 0x510, 0); + } else { + bcma_write32(dev, 0x200, 0x7ff); + + udelay(1); + } + + bcma_hcd_4716wa(dev); + } +} + +static const struct usb_ehci_pdata ehci_pdata = { +}; + +static const struct usb_ohci_pdata ohci_pdata = { +}; + +static struct platform_device *bcma_hcd_create_pdev(struct bcma_device *dev, bool ohci, u32 addr) +{ + struct platform_device *hci_dev; + struct resource hci_res[2]; + int ret = -ENOMEM; + + memset(hci_res, 0, sizeof(hci_res)); + + hci_res[0].start = addr; + hci_res[0].end = hci_res[0].start + 0x1000 - 1; + hci_res[0].flags = IORESOURCE_MEM; + + hci_res[1].start = dev->irq; + hci_res[1].flags = IORESOURCE_IRQ; + + hci_dev = platform_device_alloc(ohci ? "ohci-platform" : + "ehci-platform" , 0); + if (!hci_dev) + return NULL; + + hci_dev->dev.parent = &dev->dev; + hci_dev->dev.dma_mask = &hci_dev->dev.coherent_dma_mask; + + ret = platform_device_add_resources(hci_dev, hci_res, + ARRAY_SIZE(hci_res)); + if (ret) + goto err_alloc; + if (ohci) + ret = platform_device_add_data(hci_dev, &ohci_pdata, + sizeof(ohci_pdata)); + else + ret = platform_device_add_data(hci_dev, &ehci_pdata, + sizeof(ehci_pdata)); + if (ret) + goto err_alloc; + ret = platform_device_add(hci_dev); + if (ret) + goto err_alloc; + + return hci_dev; + +err_alloc: + platform_device_put(hci_dev); + return ERR_PTR(ret); +} + +static int bcma_hcd_probe(struct bcma_device *dev) +{ + int err; + u16 chipid_top; + u32 ohci_addr; + struct bcma_hcd_device *usb_dev; + struct bcma_chipinfo *chipinfo; + + chipinfo = &dev->bus->chipinfo; + /* USBcores are only connected on embedded devices. */ + chipid_top = (chipinfo->id & 0xFF00); + if (chipid_top != 0x4700 && chipid_top != 0x5300) + return -ENODEV; + + /* TODO: Probably need checks here; is the core connected? */ + + if (dma_set_mask_and_coherent(dev->dma_dev, DMA_BIT_MASK(32))) + return -EOPNOTSUPP; + + usb_dev = kzalloc(sizeof(struct bcma_hcd_device), GFP_KERNEL); + if (!usb_dev) + return -ENOMEM; + + bcma_hcd_init_chip(dev); + + /* In AI chips EHCI is addrspace 0, OHCI is 1 */ + ohci_addr = dev->addr_s[0]; + if ((chipinfo->id == 0x5357 || chipinfo->id == 0x4749) + && chipinfo->rev == 0) + ohci_addr = 0x18009000; + + usb_dev->ohci_dev = bcma_hcd_create_pdev(dev, true, ohci_addr); + if (IS_ERR(usb_dev->ohci_dev)) { + err = PTR_ERR(usb_dev->ohci_dev); + goto err_free_usb_dev; + } + + usb_dev->ehci_dev = bcma_hcd_create_pdev(dev, false, dev->addr); + if (IS_ERR(usb_dev->ehci_dev)) { + err = PTR_ERR(usb_dev->ehci_dev); + goto err_unregister_ohci_dev; + } + + bcma_set_drvdata(dev, usb_dev); + return 0; + +err_unregister_ohci_dev: + platform_device_unregister(usb_dev->ohci_dev); +err_free_usb_dev: + kfree(usb_dev); + return err; +} + +static void bcma_hcd_remove(struct bcma_device *dev) +{ + struct bcma_hcd_device *usb_dev = bcma_get_drvdata(dev); + struct platform_device *ohci_dev = usb_dev->ohci_dev; + struct platform_device *ehci_dev = usb_dev->ehci_dev; + + if (ohci_dev) + platform_device_unregister(ohci_dev); + if (ehci_dev) + platform_device_unregister(ehci_dev); + + bcma_core_disable(dev, 0); +} + +static void bcma_hcd_shutdown(struct bcma_device *dev) +{ + bcma_core_disable(dev, 0); +} + +#ifdef CONFIG_PM + +static int bcma_hcd_suspend(struct bcma_device *dev) +{ + bcma_core_disable(dev, 0); + + return 0; +} + +static int bcma_hcd_resume(struct bcma_device *dev) +{ + bcma_core_enable(dev, 0); + + return 0; +} + +#else /* !CONFIG_PM */ +#define bcma_hcd_suspend NULL +#define bcma_hcd_resume NULL +#endif /* CONFIG_PM */ + +static const struct bcma_device_id bcma_hcd_table[] = { + BCMA_CORE(BCMA_MANUF_BCM, BCMA_CORE_USB20_HOST, BCMA_ANY_REV, BCMA_ANY_CLASS), + {}, +}; +MODULE_DEVICE_TABLE(bcma, bcma_hcd_table); + +static struct bcma_driver bcma_hcd_driver = { + .name = KBUILD_MODNAME, + .id_table = bcma_hcd_table, + .probe = bcma_hcd_probe, + .remove = bcma_hcd_remove, + .shutdown = bcma_hcd_shutdown, + .suspend = bcma_hcd_suspend, + .resume = bcma_hcd_resume, +}; + +static int __init bcma_hcd_init(void) +{ + return bcma_driver_register(&bcma_hcd_driver); +} +module_init(bcma_hcd_init); + +static void __exit bcma_hcd_exit(void) +{ + bcma_driver_unregister(&bcma_hcd_driver); +} +module_exit(bcma_hcd_exit); |