summaryrefslogtreecommitdiff
path: root/drivers/usb/host/ehci-fsl.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/usb/host/ehci-fsl.c')
-rw-r--r--drivers/usb/host/ehci-fsl.c714
1 files changed, 714 insertions, 0 deletions
diff --git a/drivers/usb/host/ehci-fsl.c b/drivers/usb/host/ehci-fsl.c
new file mode 100644
index 000000000..ab4eee3df
--- /dev/null
+++ b/drivers/usb/host/ehci-fsl.c
@@ -0,0 +1,714 @@
+/*
+ * Copyright 2005-2009 MontaVista Software, Inc.
+ * Copyright 2008,2012 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+ * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software Foundation,
+ * Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ * Ported to 834x by Randy Vinson <rvinson@mvista.com> using code provided
+ * by Hunter Wu.
+ * Power Management support by Dave Liu <daveliu@freescale.com>,
+ * Jerry Huang <Chang-Ming.Huang@freescale.com> and
+ * Anton Vorontsov <avorontsov@ru.mvista.com>.
+ */
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/delay.h>
+#include <linux/pm.h>
+#include <linux/err.h>
+#include <linux/platform_device.h>
+#include <linux/fsl_devices.h>
+
+#include "ehci-fsl.h"
+
+/* configure so an HC device and id are always provided */
+/* always called with process context; sleeping is OK */
+
+/**
+ * usb_hcd_fsl_probe - initialize FSL-based HCDs
+ * @drvier: Driver to be used for this HCD
+ * @pdev: USB Host Controller being probed
+ * Context: !in_interrupt()
+ *
+ * Allocates basic resources for this USB host controller.
+ *
+ */
+static int usb_hcd_fsl_probe(const struct hc_driver *driver,
+ struct platform_device *pdev)
+{
+ struct fsl_usb2_platform_data *pdata;
+ struct usb_hcd *hcd;
+ struct resource *res;
+ int irq;
+ int retval;
+
+ pr_debug("initializing FSL-SOC USB Controller\n");
+
+ /* Need platform data for setup */
+ pdata = dev_get_platdata(&pdev->dev);
+ if (!pdata) {
+ dev_err(&pdev->dev,
+ "No platform data for %s.\n", dev_name(&pdev->dev));
+ return -ENODEV;
+ }
+
+ /*
+ * This is a host mode driver, verify that we're supposed to be
+ * in host mode.
+ */
+ if (!((pdata->operating_mode == FSL_USB2_DR_HOST) ||
+ (pdata->operating_mode == FSL_USB2_MPH_HOST) ||
+ (pdata->operating_mode == FSL_USB2_DR_OTG))) {
+ dev_err(&pdev->dev,
+ "Non Host Mode configured for %s. Wrong driver linked.\n",
+ dev_name(&pdev->dev));
+ return -ENODEV;
+ }
+
+ res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+ if (!res) {
+ dev_err(&pdev->dev,
+ "Found HC with no IRQ. Check %s setup!\n",
+ dev_name(&pdev->dev));
+ return -ENODEV;
+ }
+ irq = res->start;
+
+ hcd = usb_create_hcd(driver, &pdev->dev, dev_name(&pdev->dev));
+ if (!hcd) {
+ retval = -ENOMEM;
+ goto err1;
+ }
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ hcd->regs = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(hcd->regs)) {
+ retval = PTR_ERR(hcd->regs);
+ goto err2;
+ }
+
+ hcd->rsrc_start = res->start;
+ hcd->rsrc_len = resource_size(res);
+
+ pdata->regs = hcd->regs;
+
+ if (pdata->power_budget)
+ hcd->power_budget = pdata->power_budget;
+
+ /*
+ * do platform specific init: check the clock, grab/config pins, etc.
+ */
+ if (pdata->init && pdata->init(pdev)) {
+ retval = -ENODEV;
+ goto err2;
+ }
+
+ /* Enable USB controller, 83xx or 8536 */
+ if (pdata->have_sysif_regs && pdata->controller_ver < FSL_USB_VER_1_6)
+ setbits32(hcd->regs + FSL_SOC_USB_CTRL, 0x4);
+
+ /* Don't need to set host mode here. It will be done by tdi_reset() */
+
+ retval = usb_add_hcd(hcd, irq, IRQF_SHARED);
+ if (retval != 0)
+ goto err2;
+ device_wakeup_enable(hcd->self.controller);
+
+#ifdef CONFIG_USB_OTG
+ if (pdata->operating_mode == FSL_USB2_DR_OTG) {
+ struct ehci_hcd *ehci = hcd_to_ehci(hcd);
+
+ hcd->usb_phy = usb_get_phy(USB_PHY_TYPE_USB2);
+ dev_dbg(&pdev->dev, "hcd=0x%p ehci=0x%p, phy=0x%p\n",
+ hcd, ehci, hcd->usb_phy);
+
+ if (!IS_ERR_OR_NULL(hcd->usb_phy)) {
+ retval = otg_set_host(hcd->usb_phy->otg,
+ &ehci_to_hcd(ehci)->self);
+ if (retval) {
+ usb_put_phy(hcd->usb_phy);
+ goto err2;
+ }
+ } else {
+ dev_err(&pdev->dev, "can't find phy\n");
+ retval = -ENODEV;
+ goto err2;
+ }
+ }
+#endif
+ return retval;
+
+ err2:
+ usb_put_hcd(hcd);
+ err1:
+ dev_err(&pdev->dev, "init %s fail, %d\n", dev_name(&pdev->dev), retval);
+ if (pdata->exit)
+ pdata->exit(pdev);
+ return retval;
+}
+
+/* may be called without controller electrically present */
+/* may be called with controller, bus, and devices active */
+
+/**
+ * usb_hcd_fsl_remove - shutdown processing for FSL-based HCDs
+ * @dev: USB Host Controller being removed
+ * Context: !in_interrupt()
+ *
+ * Reverses the effect of usb_hcd_fsl_probe().
+ *
+ */
+static void usb_hcd_fsl_remove(struct usb_hcd *hcd,
+ struct platform_device *pdev)
+{
+ struct fsl_usb2_platform_data *pdata = dev_get_platdata(&pdev->dev);
+
+ if (!IS_ERR_OR_NULL(hcd->usb_phy)) {
+ otg_set_host(hcd->usb_phy->otg, NULL);
+ usb_put_phy(hcd->usb_phy);
+ }
+
+ usb_remove_hcd(hcd);
+
+ /*
+ * do platform specific un-initialization:
+ * release iomux pins, disable clock, etc.
+ */
+ if (pdata->exit)
+ pdata->exit(pdev);
+ usb_put_hcd(hcd);
+}
+
+static int ehci_fsl_setup_phy(struct usb_hcd *hcd,
+ enum fsl_usb2_phy_modes phy_mode,
+ unsigned int port_offset)
+{
+ u32 portsc;
+ struct ehci_hcd *ehci = hcd_to_ehci(hcd);
+ void __iomem *non_ehci = hcd->regs;
+ struct device *dev = hcd->self.controller;
+ struct fsl_usb2_platform_data *pdata = dev_get_platdata(dev);
+
+ if (pdata->controller_ver < 0) {
+ dev_warn(hcd->self.controller, "Could not get controller version\n");
+ return -ENODEV;
+ }
+
+ portsc = ehci_readl(ehci, &ehci->regs->port_status[port_offset]);
+ portsc &= ~(PORT_PTS_MSK | PORT_PTS_PTW);
+
+ switch (phy_mode) {
+ case FSL_USB2_PHY_ULPI:
+ if (pdata->have_sysif_regs && pdata->controller_ver) {
+ /* controller version 1.6 or above */
+ clrbits32(non_ehci + FSL_SOC_USB_CTRL, UTMI_PHY_EN);
+ setbits32(non_ehci + FSL_SOC_USB_CTRL,
+ ULPI_PHY_CLK_SEL | USB_CTRL_USB_EN);
+ }
+ portsc |= PORT_PTS_ULPI;
+ break;
+ case FSL_USB2_PHY_SERIAL:
+ portsc |= PORT_PTS_SERIAL;
+ break;
+ case FSL_USB2_PHY_UTMI_WIDE:
+ portsc |= PORT_PTS_PTW;
+ /* fall through */
+ case FSL_USB2_PHY_UTMI:
+ if (pdata->have_sysif_regs && pdata->controller_ver) {
+ /* controller version 1.6 or above */
+ setbits32(non_ehci + FSL_SOC_USB_CTRL, UTMI_PHY_EN);
+ mdelay(FSL_UTMI_PHY_DLY); /* Delay for UTMI PHY CLK to
+ become stable - 10ms*/
+ }
+ /* enable UTMI PHY */
+ if (pdata->have_sysif_regs)
+ setbits32(non_ehci + FSL_SOC_USB_CTRL,
+ CTRL_UTMI_PHY_EN);
+ portsc |= PORT_PTS_UTMI;
+ break;
+ case FSL_USB2_PHY_NONE:
+ break;
+ }
+
+ if (pdata->have_sysif_regs &&
+ pdata->controller_ver > FSL_USB_VER_1_6 &&
+ (phy_mode == FSL_USB2_PHY_ULPI)) {
+ /* check PHY_CLK_VALID to get phy clk valid */
+ if (!(spin_event_timeout(in_be32(non_ehci + FSL_SOC_USB_CTRL) &
+ PHY_CLK_VALID, FSL_USB_PHY_CLK_TIMEOUT, 0) ||
+ in_be32(non_ehci + FSL_SOC_USB_PRICTRL))) {
+ dev_warn(hcd->self.controller, "USB PHY clock invalid\n");
+ return -EINVAL;
+ }
+ }
+
+ ehci_writel(ehci, portsc, &ehci->regs->port_status[port_offset]);
+
+ if (phy_mode != FSL_USB2_PHY_ULPI && pdata->have_sysif_regs)
+ setbits32(non_ehci + FSL_SOC_USB_CTRL, USB_CTRL_USB_EN);
+
+ return 0;
+}
+
+static int ehci_fsl_usb_setup(struct ehci_hcd *ehci)
+{
+ struct usb_hcd *hcd = ehci_to_hcd(ehci);
+ struct fsl_usb2_platform_data *pdata;
+ void __iomem *non_ehci = hcd->regs;
+
+ pdata = dev_get_platdata(hcd->self.controller);
+
+ if (pdata->have_sysif_regs) {
+ /*
+ * Turn on cache snooping hardware, since some PowerPC platforms
+ * wholly rely on hardware to deal with cache coherent
+ */
+
+ /* Setup Snooping for all the 4GB space */
+ /* SNOOP1 starts from 0x0, size 2G */
+ out_be32(non_ehci + FSL_SOC_USB_SNOOP1, 0x0 | SNOOP_SIZE_2GB);
+ /* SNOOP2 starts from 0x80000000, size 2G */
+ out_be32(non_ehci + FSL_SOC_USB_SNOOP2, 0x80000000 | SNOOP_SIZE_2GB);
+ }
+
+ if ((pdata->operating_mode == FSL_USB2_DR_HOST) ||
+ (pdata->operating_mode == FSL_USB2_DR_OTG))
+ if (ehci_fsl_setup_phy(hcd, pdata->phy_mode, 0))
+ return -EINVAL;
+
+ if (pdata->operating_mode == FSL_USB2_MPH_HOST) {
+ unsigned int chip, rev, svr;
+
+ svr = mfspr(SPRN_SVR);
+ chip = svr >> 16;
+ rev = (svr >> 4) & 0xf;
+
+ /* Deal with USB Erratum #14 on MPC834x Rev 1.0 & 1.1 chips */
+ if ((rev == 1) && (chip >= 0x8050) && (chip <= 0x8055))
+ ehci->has_fsl_port_bug = 1;
+
+ if (pdata->port_enables & FSL_USB2_PORT0_ENABLED)
+ if (ehci_fsl_setup_phy(hcd, pdata->phy_mode, 0))
+ return -EINVAL;
+
+ if (pdata->port_enables & FSL_USB2_PORT1_ENABLED)
+ if (ehci_fsl_setup_phy(hcd, pdata->phy_mode, 1))
+ return -EINVAL;
+ }
+
+ if (pdata->have_sysif_regs) {
+#ifdef CONFIG_FSL_SOC_BOOKE
+ out_be32(non_ehci + FSL_SOC_USB_PRICTRL, 0x00000008);
+ out_be32(non_ehci + FSL_SOC_USB_AGECNTTHRSH, 0x00000080);
+#else
+ out_be32(non_ehci + FSL_SOC_USB_PRICTRL, 0x0000000c);
+ out_be32(non_ehci + FSL_SOC_USB_AGECNTTHRSH, 0x00000040);
+#endif
+ out_be32(non_ehci + FSL_SOC_USB_SICTRL, 0x00000001);
+ }
+
+ return 0;
+}
+
+/* called after powerup, by probe or system-pm "wakeup" */
+static int ehci_fsl_reinit(struct ehci_hcd *ehci)
+{
+ if (ehci_fsl_usb_setup(ehci))
+ return -EINVAL;
+
+ return 0;
+}
+
+/* called during probe() after chip reset completes */
+static int ehci_fsl_setup(struct usb_hcd *hcd)
+{
+ struct ehci_hcd *ehci = hcd_to_ehci(hcd);
+ int retval;
+ struct fsl_usb2_platform_data *pdata;
+ struct device *dev;
+
+ dev = hcd->self.controller;
+ pdata = dev_get_platdata(hcd->self.controller);
+ ehci->big_endian_desc = pdata->big_endian_desc;
+ ehci->big_endian_mmio = pdata->big_endian_mmio;
+
+ /* EHCI registers start at offset 0x100 */
+ ehci->caps = hcd->regs + 0x100;
+
+#ifdef CONFIG_PPC_83xx
+ /*
+ * Deal with MPC834X that need port power to be cycled after the power
+ * fault condition is removed. Otherwise the state machine does not
+ * reflect PORTSC[CSC] correctly.
+ */
+ ehci->need_oc_pp_cycle = 1;
+#endif
+
+ hcd->has_tt = 1;
+
+ retval = ehci_setup(hcd);
+ if (retval)
+ return retval;
+
+ if (of_device_is_compatible(dev->parent->of_node,
+ "fsl,mpc5121-usb2-dr")) {
+ /*
+ * set SBUSCFG:AHBBRST so that control msgs don't
+ * fail when doing heavy PATA writes.
+ */
+ ehci_writel(ehci, SBUSCFG_INCR8,
+ hcd->regs + FSL_SOC_USB_SBUSCFG);
+ }
+
+ retval = ehci_fsl_reinit(ehci);
+ return retval;
+}
+
+struct ehci_fsl {
+ struct ehci_hcd ehci;
+
+#ifdef CONFIG_PM
+ /* Saved USB PHY settings, need to restore after deep sleep. */
+ u32 usb_ctrl;
+#endif
+};
+
+#ifdef CONFIG_PM
+
+#ifdef CONFIG_PPC_MPC512x
+static int ehci_fsl_mpc512x_drv_suspend(struct device *dev)
+{
+ struct usb_hcd *hcd = dev_get_drvdata(dev);
+ struct ehci_hcd *ehci = hcd_to_ehci(hcd);
+ struct fsl_usb2_platform_data *pdata = dev_get_platdata(dev);
+ u32 tmp;
+
+#ifdef CONFIG_DYNAMIC_DEBUG
+ u32 mode = ehci_readl(ehci, hcd->regs + FSL_SOC_USB_USBMODE);
+ mode &= USBMODE_CM_MASK;
+ tmp = ehci_readl(ehci, hcd->regs + 0x140); /* usbcmd */
+
+ dev_dbg(dev, "suspend=%d already_suspended=%d "
+ "mode=%d usbcmd %08x\n", pdata->suspended,
+ pdata->already_suspended, mode, tmp);
+#endif
+
+ /*
+ * If the controller is already suspended, then this must be a
+ * PM suspend. Remember this fact, so that we will leave the
+ * controller suspended at PM resume time.
+ */
+ if (pdata->suspended) {
+ dev_dbg(dev, "already suspended, leaving early\n");
+ pdata->already_suspended = 1;
+ return 0;
+ }
+
+ dev_dbg(dev, "suspending...\n");
+
+ ehci->rh_state = EHCI_RH_SUSPENDED;
+ dev->power.power_state = PMSG_SUSPEND;
+
+ /* ignore non-host interrupts */
+ clear_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
+
+ /* stop the controller */
+ tmp = ehci_readl(ehci, &ehci->regs->command);
+ tmp &= ~CMD_RUN;
+ ehci_writel(ehci, tmp, &ehci->regs->command);
+
+ /* save EHCI registers */
+ pdata->pm_command = ehci_readl(ehci, &ehci->regs->command);
+ pdata->pm_command &= ~CMD_RUN;
+ pdata->pm_status = ehci_readl(ehci, &ehci->regs->status);
+ pdata->pm_intr_enable = ehci_readl(ehci, &ehci->regs->intr_enable);
+ pdata->pm_frame_index = ehci_readl(ehci, &ehci->regs->frame_index);
+ pdata->pm_segment = ehci_readl(ehci, &ehci->regs->segment);
+ pdata->pm_frame_list = ehci_readl(ehci, &ehci->regs->frame_list);
+ pdata->pm_async_next = ehci_readl(ehci, &ehci->regs->async_next);
+ pdata->pm_configured_flag =
+ ehci_readl(ehci, &ehci->regs->configured_flag);
+ pdata->pm_portsc = ehci_readl(ehci, &ehci->regs->port_status[0]);
+ pdata->pm_usbgenctrl = ehci_readl(ehci,
+ hcd->regs + FSL_SOC_USB_USBGENCTRL);
+
+ /* clear the W1C bits */
+ pdata->pm_portsc &= cpu_to_hc32(ehci, ~PORT_RWC_BITS);
+
+ pdata->suspended = 1;
+
+ /* clear PP to cut power to the port */
+ tmp = ehci_readl(ehci, &ehci->regs->port_status[0]);
+ tmp &= ~PORT_POWER;
+ ehci_writel(ehci, tmp, &ehci->regs->port_status[0]);
+
+ return 0;
+}
+
+static int ehci_fsl_mpc512x_drv_resume(struct device *dev)
+{
+ struct usb_hcd *hcd = dev_get_drvdata(dev);
+ struct ehci_hcd *ehci = hcd_to_ehci(hcd);
+ struct fsl_usb2_platform_data *pdata = dev_get_platdata(dev);
+ u32 tmp;
+
+ dev_dbg(dev, "suspend=%d already_suspended=%d\n",
+ pdata->suspended, pdata->already_suspended);
+
+ /*
+ * If the controller was already suspended at suspend time,
+ * then don't resume it now.
+ */
+ if (pdata->already_suspended) {
+ dev_dbg(dev, "already suspended, leaving early\n");
+ pdata->already_suspended = 0;
+ return 0;
+ }
+
+ if (!pdata->suspended) {
+ dev_dbg(dev, "not suspended, leaving early\n");
+ return 0;
+ }
+
+ pdata->suspended = 0;
+
+ dev_dbg(dev, "resuming...\n");
+
+ /* set host mode */
+ tmp = USBMODE_CM_HOST | (pdata->es ? USBMODE_ES : 0);
+ ehci_writel(ehci, tmp, hcd->regs + FSL_SOC_USB_USBMODE);
+
+ ehci_writel(ehci, pdata->pm_usbgenctrl,
+ hcd->regs + FSL_SOC_USB_USBGENCTRL);
+ ehci_writel(ehci, ISIPHYCTRL_PXE | ISIPHYCTRL_PHYE,
+ hcd->regs + FSL_SOC_USB_ISIPHYCTRL);
+
+ ehci_writel(ehci, SBUSCFG_INCR8, hcd->regs + FSL_SOC_USB_SBUSCFG);
+
+ /* restore EHCI registers */
+ ehci_writel(ehci, pdata->pm_command, &ehci->regs->command);
+ ehci_writel(ehci, pdata->pm_intr_enable, &ehci->regs->intr_enable);
+ ehci_writel(ehci, pdata->pm_frame_index, &ehci->regs->frame_index);
+ ehci_writel(ehci, pdata->pm_segment, &ehci->regs->segment);
+ ehci_writel(ehci, pdata->pm_frame_list, &ehci->regs->frame_list);
+ ehci_writel(ehci, pdata->pm_async_next, &ehci->regs->async_next);
+ ehci_writel(ehci, pdata->pm_configured_flag,
+ &ehci->regs->configured_flag);
+ ehci_writel(ehci, pdata->pm_portsc, &ehci->regs->port_status[0]);
+
+ set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
+ ehci->rh_state = EHCI_RH_RUNNING;
+ dev->power.power_state = PMSG_ON;
+
+ tmp = ehci_readl(ehci, &ehci->regs->command);
+ tmp |= CMD_RUN;
+ ehci_writel(ehci, tmp, &ehci->regs->command);
+
+ usb_hcd_resume_root_hub(hcd);
+
+ return 0;
+}
+#else
+static inline int ehci_fsl_mpc512x_drv_suspend(struct device *dev)
+{
+ return 0;
+}
+
+static inline int ehci_fsl_mpc512x_drv_resume(struct device *dev)
+{
+ return 0;
+}
+#endif /* CONFIG_PPC_MPC512x */
+
+static struct ehci_fsl *hcd_to_ehci_fsl(struct usb_hcd *hcd)
+{
+ struct ehci_hcd *ehci = hcd_to_ehci(hcd);
+
+ return container_of(ehci, struct ehci_fsl, ehci);
+}
+
+static int ehci_fsl_drv_suspend(struct device *dev)
+{
+ struct usb_hcd *hcd = dev_get_drvdata(dev);
+ struct ehci_fsl *ehci_fsl = hcd_to_ehci_fsl(hcd);
+ void __iomem *non_ehci = hcd->regs;
+
+ if (of_device_is_compatible(dev->parent->of_node,
+ "fsl,mpc5121-usb2-dr")) {
+ return ehci_fsl_mpc512x_drv_suspend(dev);
+ }
+
+ ehci_prepare_ports_for_controller_suspend(hcd_to_ehci(hcd),
+ device_may_wakeup(dev));
+ if (!fsl_deep_sleep())
+ return 0;
+
+ ehci_fsl->usb_ctrl = in_be32(non_ehci + FSL_SOC_USB_CTRL);
+ return 0;
+}
+
+static int ehci_fsl_drv_resume(struct device *dev)
+{
+ struct usb_hcd *hcd = dev_get_drvdata(dev);
+ struct ehci_fsl *ehci_fsl = hcd_to_ehci_fsl(hcd);
+ struct ehci_hcd *ehci = hcd_to_ehci(hcd);
+ void __iomem *non_ehci = hcd->regs;
+
+ if (of_device_is_compatible(dev->parent->of_node,
+ "fsl,mpc5121-usb2-dr")) {
+ return ehci_fsl_mpc512x_drv_resume(dev);
+ }
+
+ ehci_prepare_ports_for_controller_resume(ehci);
+ if (!fsl_deep_sleep())
+ return 0;
+
+ usb_root_hub_lost_power(hcd->self.root_hub);
+
+ /* Restore USB PHY settings and enable the controller. */
+ out_be32(non_ehci + FSL_SOC_USB_CTRL, ehci_fsl->usb_ctrl);
+
+ ehci_reset(ehci);
+ ehci_fsl_reinit(ehci);
+
+ return 0;
+}
+
+static int ehci_fsl_drv_restore(struct device *dev)
+{
+ struct usb_hcd *hcd = dev_get_drvdata(dev);
+
+ usb_root_hub_lost_power(hcd->self.root_hub);
+ return 0;
+}
+
+static struct dev_pm_ops ehci_fsl_pm_ops = {
+ .suspend = ehci_fsl_drv_suspend,
+ .resume = ehci_fsl_drv_resume,
+ .restore = ehci_fsl_drv_restore,
+};
+
+#define EHCI_FSL_PM_OPS (&ehci_fsl_pm_ops)
+#else
+#define EHCI_FSL_PM_OPS NULL
+#endif /* CONFIG_PM */
+
+#ifdef CONFIG_USB_OTG
+static int ehci_start_port_reset(struct usb_hcd *hcd, unsigned port)
+{
+ struct ehci_hcd *ehci = hcd_to_ehci(hcd);
+ u32 status;
+
+ if (!port)
+ return -EINVAL;
+
+ port--;
+
+ /* start port reset before HNP protocol time out */
+ status = readl(&ehci->regs->port_status[port]);
+ if (!(status & PORT_CONNECT))
+ return -ENODEV;
+
+ /* hub_wq will finish the reset later */
+ if (ehci_is_TDI(ehci)) {
+ writel(PORT_RESET |
+ (status & ~(PORT_CSC | PORT_PEC | PORT_OCC)),
+ &ehci->regs->port_status[port]);
+ } else {
+ writel(PORT_RESET, &ehci->regs->port_status[port]);
+ }
+
+ return 0;
+}
+#else
+#define ehci_start_port_reset NULL
+#endif /* CONFIG_USB_OTG */
+
+
+static const struct hc_driver ehci_fsl_hc_driver = {
+ .description = hcd_name,
+ .product_desc = "Freescale On-Chip EHCI Host Controller",
+ .hcd_priv_size = sizeof(struct ehci_fsl),
+
+ /*
+ * generic hardware linkage
+ */
+ .irq = ehci_irq,
+ .flags = HCD_USB2 | HCD_MEMORY | HCD_BH,
+
+ /*
+ * basic lifecycle operations
+ */
+ .reset = ehci_fsl_setup,
+ .start = ehci_run,
+ .stop = ehci_stop,
+ .shutdown = ehci_shutdown,
+
+ /*
+ * managing i/o requests and associated device resources
+ */
+ .urb_enqueue = ehci_urb_enqueue,
+ .urb_dequeue = ehci_urb_dequeue,
+ .endpoint_disable = ehci_endpoint_disable,
+ .endpoint_reset = ehci_endpoint_reset,
+
+ /*
+ * scheduling support
+ */
+ .get_frame_number = ehci_get_frame,
+
+ /*
+ * root hub support
+ */
+ .hub_status_data = ehci_hub_status_data,
+ .hub_control = ehci_hub_control,
+ .bus_suspend = ehci_bus_suspend,
+ .bus_resume = ehci_bus_resume,
+ .start_port_reset = ehci_start_port_reset,
+ .relinquish_port = ehci_relinquish_port,
+ .port_handed_over = ehci_port_handed_over,
+
+ .clear_tt_buffer_complete = ehci_clear_tt_buffer_complete,
+};
+
+static int ehci_fsl_drv_probe(struct platform_device *pdev)
+{
+ if (usb_disabled())
+ return -ENODEV;
+
+ /* FIXME we only want one one probe() not two */
+ return usb_hcd_fsl_probe(&ehci_fsl_hc_driver, pdev);
+}
+
+static int ehci_fsl_drv_remove(struct platform_device *pdev)
+{
+ struct usb_hcd *hcd = platform_get_drvdata(pdev);
+
+ /* FIXME we only want one one remove() not two */
+ usb_hcd_fsl_remove(hcd, pdev);
+ return 0;
+}
+
+MODULE_ALIAS("platform:fsl-ehci");
+
+static struct platform_driver ehci_fsl_driver = {
+ .probe = ehci_fsl_drv_probe,
+ .remove = ehci_fsl_drv_remove,
+ .shutdown = usb_hcd_platform_shutdown,
+ .driver = {
+ .name = "fsl-ehci",
+ .pm = EHCI_FSL_PM_OPS,
+ },
+};