diff options
Diffstat (limited to 'drivers/usb/host/ehci-fsl.c')
| -rw-r--r-- | drivers/usb/host/ehci-fsl.c | 53 |
1 files changed, 37 insertions, 16 deletions
diff --git a/drivers/usb/host/ehci-fsl.c b/drivers/usb/host/ehci-fsl.c index 5352e74b9..3b6eb219d 100644 --- a/drivers/usb/host/ehci-fsl.c +++ b/drivers/usb/host/ehci-fsl.c @@ -127,7 +127,18 @@ static int fsl_ehci_drv_probe(struct platform_device *pdev) /* Enable USB controller, 83xx or 8536 */ if (pdata->have_sysif_regs && pdata->controller_ver < FSL_USB_VER_1_6) - setbits32(hcd->regs + FSL_SOC_USB_CTRL, 0x4); + clrsetbits_be32(hcd->regs + FSL_SOC_USB_CTRL, + CONTROL_REGISTER_W1C_MASK, 0x4); + + /* + * Enable UTMI phy and program PTS field in UTMI mode before asserting + * controller reset for USB Controller version 2.5 + */ + if (pdata->has_fsl_erratum_a007792) { + clrsetbits_be32(hcd->regs + FSL_SOC_USB_CTRL, + CONTROL_REGISTER_W1C_MASK, CTRL_UTMI_PHY_EN); + writel(PORT_PTS_UTMI, hcd->regs + FSL_SOC_USB_PORTSC1); + } /* Don't need to set host mode here. It will be done by tdi_reset() */ @@ -191,9 +202,11 @@ static int ehci_fsl_setup_phy(struct usb_hcd *hcd, case FSL_USB2_PHY_ULPI: if (pdata->have_sysif_regs && pdata->controller_ver) { /* controller version 1.6 or above */ - clrbits32(non_ehci + FSL_SOC_USB_CTRL, UTMI_PHY_EN); - setbits32(non_ehci + FSL_SOC_USB_CTRL, - ULPI_PHY_CLK_SEL | USB_CTRL_USB_EN); + clrbits32(non_ehci + FSL_SOC_USB_CTRL, + CONTROL_REGISTER_W1C_MASK | UTMI_PHY_EN); + clrsetbits_be32(non_ehci + FSL_SOC_USB_CTRL, + CONTROL_REGISTER_W1C_MASK, + ULPI_PHY_CLK_SEL | USB_CTRL_USB_EN); } portsc |= PORT_PTS_ULPI; break; @@ -204,30 +217,33 @@ static int ehci_fsl_setup_phy(struct usb_hcd *hcd, portsc |= PORT_PTS_PTW; /* fall through */ case FSL_USB2_PHY_UTMI: + case FSL_USB2_PHY_UTMI_DUAL: if (pdata->have_sysif_regs && pdata->controller_ver) { /* controller version 1.6 or above */ - setbits32(non_ehci + FSL_SOC_USB_CTRL, UTMI_PHY_EN); + clrsetbits_be32(non_ehci + FSL_SOC_USB_CTRL, + CONTROL_REGISTER_W1C_MASK, UTMI_PHY_EN); mdelay(FSL_UTMI_PHY_DLY); /* Delay for UTMI PHY CLK to become stable - 10ms*/ } /* enable UTMI PHY */ if (pdata->have_sysif_regs) - setbits32(non_ehci + FSL_SOC_USB_CTRL, - CTRL_UTMI_PHY_EN); + clrsetbits_be32(non_ehci + FSL_SOC_USB_CTRL, + CONTROL_REGISTER_W1C_MASK, + CTRL_UTMI_PHY_EN); portsc |= PORT_PTS_UTMI; break; case FSL_USB2_PHY_NONE: break; } - if (pdata->have_sysif_regs && - pdata->controller_ver > FSL_USB_VER_1_6 && - (phy_mode == FSL_USB2_PHY_ULPI)) { - /* check PHY_CLK_VALID to get phy clk valid */ - if (!(spin_event_timeout(in_be32(non_ehci + FSL_SOC_USB_CTRL) & - PHY_CLK_VALID, FSL_USB_PHY_CLK_TIMEOUT, 0) || - in_be32(non_ehci + FSL_SOC_USB_PRICTRL))) { - dev_warn(hcd->self.controller, "USB PHY clock invalid\n"); + /* + * check PHY_CLK_VALID to determine phy clock presence before writing + * to portsc + */ + if (pdata->check_phy_clk_valid) { + if (!(in_be32(non_ehci + FSL_SOC_USB_CTRL) & PHY_CLK_VALID)) { + dev_warn(hcd->self.controller, + "USB PHY clock invalid\n"); return -EINVAL; } } @@ -235,7 +251,8 @@ static int ehci_fsl_setup_phy(struct usb_hcd *hcd, ehci_writel(ehci, portsc, &ehci->regs->port_status[port_offset]); if (phy_mode != FSL_USB2_PHY_ULPI && pdata->have_sysif_regs) - setbits32(non_ehci + FSL_SOC_USB_CTRL, USB_CTRL_USB_EN); + clrsetbits_be32(non_ehci + FSL_SOC_USB_CTRL, + CONTROL_REGISTER_W1C_MASK, USB_CTRL_USB_EN); return 0; } @@ -261,6 +278,10 @@ static int ehci_fsl_usb_setup(struct ehci_hcd *ehci) out_be32(non_ehci + FSL_SOC_USB_SNOOP2, 0x80000000 | SNOOP_SIZE_2GB); } + /* Deal with USB erratum A-005275 */ + if (pdata->has_fsl_erratum_a005275 == 1) + ehci->has_fsl_hs_errata = 1; + if ((pdata->operating_mode == FSL_USB2_DR_HOST) || (pdata->operating_mode == FSL_USB2_DR_OTG)) if (ehci_fsl_setup_phy(hcd, pdata->phy_mode, 0)) |