summaryrefslogtreecommitdiff
path: root/drivers/usb/host/ehci-hcd.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/usb/host/ehci-hcd.c')
-rw-r--r--drivers/usb/host/ehci-hcd.c1400
1 files changed, 1400 insertions, 0 deletions
diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c
new file mode 100644
index 000000000..f4d88dfb2
--- /dev/null
+++ b/drivers/usb/host/ehci-hcd.c
@@ -0,0 +1,1400 @@
+/*
+ * Enhanced Host Controller Interface (EHCI) driver for USB.
+ *
+ * Maintainer: Alan Stern <stern@rowland.harvard.edu>
+ *
+ * Copyright (c) 2000-2004 by David Brownell
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+ * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software Foundation,
+ * Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/dmapool.h>
+#include <linux/kernel.h>
+#include <linux/delay.h>
+#include <linux/ioport.h>
+#include <linux/sched.h>
+#include <linux/vmalloc.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/hrtimer.h>
+#include <linux/list.h>
+#include <linux/interrupt.h>
+#include <linux/usb.h>
+#include <linux/usb/hcd.h>
+#include <linux/moduleparam.h>
+#include <linux/dma-mapping.h>
+#include <linux/debugfs.h>
+#include <linux/slab.h>
+
+#include <asm/byteorder.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/unaligned.h>
+
+#if defined(CONFIG_PPC_PS3)
+#include <asm/firmware.h>
+#endif
+
+/*-------------------------------------------------------------------------*/
+
+/*
+ * EHCI hc_driver implementation ... experimental, incomplete.
+ * Based on the final 1.0 register interface specification.
+ *
+ * USB 2.0 shows up in upcoming www.pcmcia.org technology.
+ * First was PCMCIA, like ISA; then CardBus, which is PCI.
+ * Next comes "CardBay", using USB 2.0 signals.
+ *
+ * Contains additional contributions by Brad Hards, Rory Bolt, and others.
+ * Special thanks to Intel and VIA for providing host controllers to
+ * test this driver on, and Cypress (including In-System Design) for
+ * providing early devices for those host controllers to talk to!
+ */
+
+#define DRIVER_AUTHOR "David Brownell"
+#define DRIVER_DESC "USB 2.0 'Enhanced' Host Controller (EHCI) Driver"
+
+static const char hcd_name [] = "ehci_hcd";
+
+
+#undef EHCI_URB_TRACE
+
+/* magic numbers that can affect system performance */
+#define EHCI_TUNE_CERR 3 /* 0-3 qtd retries; 0 == don't stop */
+#define EHCI_TUNE_RL_HS 4 /* nak throttle; see 4.9 */
+#define EHCI_TUNE_RL_TT 0
+#define EHCI_TUNE_MULT_HS 1 /* 1-3 transactions/uframe; 4.10.3 */
+#define EHCI_TUNE_MULT_TT 1
+/*
+ * Some drivers think it's safe to schedule isochronous transfers more than
+ * 256 ms into the future (partly as a result of an old bug in the scheduling
+ * code). In an attempt to avoid trouble, we will use a minimum scheduling
+ * length of 512 frames instead of 256.
+ */
+#define EHCI_TUNE_FLS 1 /* (medium) 512-frame schedule */
+
+/* Initial IRQ latency: faster than hw default */
+static int log2_irq_thresh = 0; // 0 to 6
+module_param (log2_irq_thresh, int, S_IRUGO);
+MODULE_PARM_DESC (log2_irq_thresh, "log2 IRQ latency, 1-64 microframes");
+
+/* initial park setting: slower than hw default */
+static unsigned park = 0;
+module_param (park, uint, S_IRUGO);
+MODULE_PARM_DESC (park, "park setting; 1-3 back-to-back async packets");
+
+/* for flakey hardware, ignore overcurrent indicators */
+static bool ignore_oc = 0;
+module_param (ignore_oc, bool, S_IRUGO);
+MODULE_PARM_DESC (ignore_oc, "ignore bogus hardware overcurrent indications");
+
+#define INTR_MASK (STS_IAA | STS_FATAL | STS_PCD | STS_ERR | STS_INT)
+
+/*-------------------------------------------------------------------------*/
+
+#include "ehci.h"
+#include "pci-quirks.h"
+
+static void compute_tt_budget(u8 budget_table[EHCI_BANDWIDTH_SIZE],
+ struct ehci_tt *tt);
+
+/*
+ * The MosChip MCS9990 controller updates its microframe counter
+ * a little before the frame counter, and occasionally we will read
+ * the invalid intermediate value. Avoid problems by checking the
+ * microframe number (the low-order 3 bits); if they are 0 then
+ * re-read the register to get the correct value.
+ */
+static unsigned ehci_moschip_read_frame_index(struct ehci_hcd *ehci)
+{
+ unsigned uf;
+
+ uf = ehci_readl(ehci, &ehci->regs->frame_index);
+ if (unlikely((uf & 7) == 0))
+ uf = ehci_readl(ehci, &ehci->regs->frame_index);
+ return uf;
+}
+
+static inline unsigned ehci_read_frame_index(struct ehci_hcd *ehci)
+{
+ if (ehci->frame_index_bug)
+ return ehci_moschip_read_frame_index(ehci);
+ return ehci_readl(ehci, &ehci->regs->frame_index);
+}
+
+#include "ehci-dbg.c"
+
+/*-------------------------------------------------------------------------*/
+
+/*
+ * ehci_handshake - spin reading hc until handshake completes or fails
+ * @ptr: address of hc register to be read
+ * @mask: bits to look at in result of read
+ * @done: value of those bits when handshake succeeds
+ * @usec: timeout in microseconds
+ *
+ * Returns negative errno, or zero on success
+ *
+ * Success happens when the "mask" bits have the specified value (hardware
+ * handshake done). There are two failure modes: "usec" have passed (major
+ * hardware flakeout), or the register reads as all-ones (hardware removed).
+ *
+ * That last failure should_only happen in cases like physical cardbus eject
+ * before driver shutdown. But it also seems to be caused by bugs in cardbus
+ * bridge shutdown: shutting down the bridge before the devices using it.
+ */
+int ehci_handshake(struct ehci_hcd *ehci, void __iomem *ptr,
+ u32 mask, u32 done, int usec)
+{
+ u32 result;
+
+ do {
+ result = ehci_readl(ehci, ptr);
+ if (result == ~(u32)0) /* card removed */
+ return -ENODEV;
+ result &= mask;
+ if (result == done)
+ return 0;
+ udelay (1);
+ usec--;
+ } while (usec > 0);
+ return -ETIMEDOUT;
+}
+EXPORT_SYMBOL_GPL(ehci_handshake);
+
+/* check TDI/ARC silicon is in host mode */
+static int tdi_in_host_mode (struct ehci_hcd *ehci)
+{
+ u32 tmp;
+
+ tmp = ehci_readl(ehci, &ehci->regs->usbmode);
+ return (tmp & 3) == USBMODE_CM_HC;
+}
+
+/*
+ * Force HC to halt state from unknown (EHCI spec section 2.3).
+ * Must be called with interrupts enabled and the lock not held.
+ */
+static int ehci_halt (struct ehci_hcd *ehci)
+{
+ u32 temp;
+
+ spin_lock_irq(&ehci->lock);
+
+ /* disable any irqs left enabled by previous code */
+ ehci_writel(ehci, 0, &ehci->regs->intr_enable);
+
+ if (ehci_is_TDI(ehci) && !tdi_in_host_mode(ehci)) {
+ spin_unlock_irq(&ehci->lock);
+ return 0;
+ }
+
+ /*
+ * This routine gets called during probe before ehci->command
+ * has been initialized, so we can't rely on its value.
+ */
+ ehci->command &= ~CMD_RUN;
+ temp = ehci_readl(ehci, &ehci->regs->command);
+ temp &= ~(CMD_RUN | CMD_IAAD);
+ ehci_writel(ehci, temp, &ehci->regs->command);
+
+ spin_unlock_irq(&ehci->lock);
+ synchronize_irq(ehci_to_hcd(ehci)->irq);
+
+ return ehci_handshake(ehci, &ehci->regs->status,
+ STS_HALT, STS_HALT, 16 * 125);
+}
+
+/* put TDI/ARC silicon into EHCI mode */
+static void tdi_reset (struct ehci_hcd *ehci)
+{
+ u32 tmp;
+
+ tmp = ehci_readl(ehci, &ehci->regs->usbmode);
+ tmp |= USBMODE_CM_HC;
+ /* The default byte access to MMR space is LE after
+ * controller reset. Set the required endian mode
+ * for transfer buffers to match the host microprocessor
+ */
+ if (ehci_big_endian_mmio(ehci))
+ tmp |= USBMODE_BE;
+ ehci_writel(ehci, tmp, &ehci->regs->usbmode);
+}
+
+/*
+ * Reset a non-running (STS_HALT == 1) controller.
+ * Must be called with interrupts enabled and the lock not held.
+ */
+static int ehci_reset (struct ehci_hcd *ehci)
+{
+ int retval;
+ u32 command = ehci_readl(ehci, &ehci->regs->command);
+
+ /* If the EHCI debug controller is active, special care must be
+ * taken before and after a host controller reset */
+ if (ehci->debug && !dbgp_reset_prep(ehci_to_hcd(ehci)))
+ ehci->debug = NULL;
+
+ command |= CMD_RESET;
+ dbg_cmd (ehci, "reset", command);
+ ehci_writel(ehci, command, &ehci->regs->command);
+ ehci->rh_state = EHCI_RH_HALTED;
+ ehci->next_statechange = jiffies;
+ retval = ehci_handshake(ehci, &ehci->regs->command,
+ CMD_RESET, 0, 250 * 1000);
+
+ if (ehci->has_hostpc) {
+ ehci_writel(ehci, USBMODE_EX_HC | USBMODE_EX_VBPS,
+ &ehci->regs->usbmode_ex);
+ ehci_writel(ehci, TXFIFO_DEFAULT, &ehci->regs->txfill_tuning);
+ }
+ if (retval)
+ return retval;
+
+ if (ehci_is_TDI(ehci))
+ tdi_reset (ehci);
+
+ if (ehci->debug)
+ dbgp_external_startup(ehci_to_hcd(ehci));
+
+ ehci->port_c_suspend = ehci->suspended_ports =
+ ehci->resuming_ports = 0;
+ return retval;
+}
+
+/*
+ * Idle the controller (turn off the schedules).
+ * Must be called with interrupts enabled and the lock not held.
+ */
+static void ehci_quiesce (struct ehci_hcd *ehci)
+{
+ u32 temp;
+
+ if (ehci->rh_state != EHCI_RH_RUNNING)
+ return;
+
+ /* wait for any schedule enables/disables to take effect */
+ temp = (ehci->command << 10) & (STS_ASS | STS_PSS);
+ ehci_handshake(ehci, &ehci->regs->status, STS_ASS | STS_PSS, temp,
+ 16 * 125);
+
+ /* then disable anything that's still active */
+ spin_lock_irq(&ehci->lock);
+ ehci->command &= ~(CMD_ASE | CMD_PSE);
+ ehci_writel(ehci, ehci->command, &ehci->regs->command);
+ spin_unlock_irq(&ehci->lock);
+
+ /* hardware can take 16 microframes to turn off ... */
+ ehci_handshake(ehci, &ehci->regs->status, STS_ASS | STS_PSS, 0,
+ 16 * 125);
+}
+
+/*-------------------------------------------------------------------------*/
+
+static void end_unlink_async(struct ehci_hcd *ehci);
+static void unlink_empty_async(struct ehci_hcd *ehci);
+static void unlink_empty_async_suspended(struct ehci_hcd *ehci);
+static void ehci_work(struct ehci_hcd *ehci);
+static void start_unlink_intr(struct ehci_hcd *ehci, struct ehci_qh *qh);
+static void end_unlink_intr(struct ehci_hcd *ehci, struct ehci_qh *qh);
+static int ehci_port_power(struct ehci_hcd *ehci, int portnum, bool enable);
+
+#include "ehci-timer.c"
+#include "ehci-hub.c"
+#include "ehci-mem.c"
+#include "ehci-q.c"
+#include "ehci-sched.c"
+#include "ehci-sysfs.c"
+
+/*-------------------------------------------------------------------------*/
+
+/* On some systems, leaving remote wakeup enabled prevents system shutdown.
+ * The firmware seems to think that powering off is a wakeup event!
+ * This routine turns off remote wakeup and everything else, on all ports.
+ */
+static void ehci_turn_off_all_ports(struct ehci_hcd *ehci)
+{
+ int port = HCS_N_PORTS(ehci->hcs_params);
+
+ while (port--) {
+ ehci_writel(ehci, PORT_RWC_BITS,
+ &ehci->regs->port_status[port]);
+ spin_unlock_irq(&ehci->lock);
+ ehci_port_power(ehci, port, false);
+ spin_lock_irq(&ehci->lock);
+ }
+}
+
+/*
+ * Halt HC, turn off all ports, and let the BIOS use the companion controllers.
+ * Must be called with interrupts enabled and the lock not held.
+ */
+static void ehci_silence_controller(struct ehci_hcd *ehci)
+{
+ ehci_halt(ehci);
+
+ spin_lock_irq(&ehci->lock);
+ ehci->rh_state = EHCI_RH_HALTED;
+ ehci_turn_off_all_ports(ehci);
+
+ /* make BIOS/etc use companion controller during reboot */
+ ehci_writel(ehci, 0, &ehci->regs->configured_flag);
+
+ /* unblock posted writes */
+ ehci_readl(ehci, &ehci->regs->configured_flag);
+ spin_unlock_irq(&ehci->lock);
+}
+
+/* ehci_shutdown kick in for silicon on any bus (not just pci, etc).
+ * This forcibly disables dma and IRQs, helping kexec and other cases
+ * where the next system software may expect clean state.
+ */
+static void ehci_shutdown(struct usb_hcd *hcd)
+{
+ struct ehci_hcd *ehci = hcd_to_ehci(hcd);
+
+ spin_lock_irq(&ehci->lock);
+ ehci->shutdown = true;
+ ehci->rh_state = EHCI_RH_STOPPING;
+ ehci->enabled_hrtimer_events = 0;
+ spin_unlock_irq(&ehci->lock);
+
+ ehci_silence_controller(ehci);
+
+ hrtimer_cancel(&ehci->hrtimer);
+}
+
+/*-------------------------------------------------------------------------*/
+
+/*
+ * ehci_work is called from some interrupts, timers, and so on.
+ * it calls driver completion functions, after dropping ehci->lock.
+ */
+static void ehci_work (struct ehci_hcd *ehci)
+{
+ /* another CPU may drop ehci->lock during a schedule scan while
+ * it reports urb completions. this flag guards against bogus
+ * attempts at re-entrant schedule scanning.
+ */
+ if (ehci->scanning) {
+ ehci->need_rescan = true;
+ return;
+ }
+ ehci->scanning = true;
+
+ rescan:
+ ehci->need_rescan = false;
+ if (ehci->async_count)
+ scan_async(ehci);
+ if (ehci->intr_count > 0)
+ scan_intr(ehci);
+ if (ehci->isoc_count > 0)
+ scan_isoc(ehci);
+ if (ehci->need_rescan)
+ goto rescan;
+ ehci->scanning = false;
+
+ /* the IO watchdog guards against hardware or driver bugs that
+ * misplace IRQs, and should let us run completely without IRQs.
+ * such lossage has been observed on both VT6202 and VT8235.
+ */
+ turn_on_io_watchdog(ehci);
+}
+
+/*
+ * Called when the ehci_hcd module is removed.
+ */
+static void ehci_stop (struct usb_hcd *hcd)
+{
+ struct ehci_hcd *ehci = hcd_to_ehci (hcd);
+
+ ehci_dbg (ehci, "stop\n");
+
+ /* no more interrupts ... */
+
+ spin_lock_irq(&ehci->lock);
+ ehci->enabled_hrtimer_events = 0;
+ spin_unlock_irq(&ehci->lock);
+
+ ehci_quiesce(ehci);
+ ehci_silence_controller(ehci);
+ ehci_reset (ehci);
+
+ hrtimer_cancel(&ehci->hrtimer);
+ remove_sysfs_files(ehci);
+ remove_debug_files (ehci);
+
+ /* root hub is shut down separately (first, when possible) */
+ spin_lock_irq (&ehci->lock);
+ end_free_itds(ehci);
+ spin_unlock_irq (&ehci->lock);
+ ehci_mem_cleanup (ehci);
+
+ if (ehci->amd_pll_fix == 1)
+ usb_amd_dev_put();
+
+ dbg_status (ehci, "ehci_stop completed",
+ ehci_readl(ehci, &ehci->regs->status));
+}
+
+/* one-time init, only for memory state */
+static int ehci_init(struct usb_hcd *hcd)
+{
+ struct ehci_hcd *ehci = hcd_to_ehci(hcd);
+ u32 temp;
+ int retval;
+ u32 hcc_params;
+ struct ehci_qh_hw *hw;
+
+ spin_lock_init(&ehci->lock);
+
+ /*
+ * keep io watchdog by default, those good HCDs could turn off it later
+ */
+ ehci->need_io_watchdog = 1;
+
+ hrtimer_init(&ehci->hrtimer, CLOCK_MONOTONIC, HRTIMER_MODE_ABS);
+ ehci->hrtimer.function = ehci_hrtimer_func;
+ ehci->next_hrtimer_event = EHCI_HRTIMER_NO_EVENT;
+
+ hcc_params = ehci_readl(ehci, &ehci->caps->hcc_params);
+
+ /*
+ * by default set standard 80% (== 100 usec/uframe) max periodic
+ * bandwidth as required by USB 2.0
+ */
+ ehci->uframe_periodic_max = 100;
+
+ /*
+ * hw default: 1K periodic list heads, one per frame.
+ * periodic_size can shrink by USBCMD update if hcc_params allows.
+ */
+ ehci->periodic_size = DEFAULT_I_TDPS;
+ INIT_LIST_HEAD(&ehci->async_unlink);
+ INIT_LIST_HEAD(&ehci->async_idle);
+ INIT_LIST_HEAD(&ehci->intr_unlink_wait);
+ INIT_LIST_HEAD(&ehci->intr_unlink);
+ INIT_LIST_HEAD(&ehci->intr_qh_list);
+ INIT_LIST_HEAD(&ehci->cached_itd_list);
+ INIT_LIST_HEAD(&ehci->cached_sitd_list);
+ INIT_LIST_HEAD(&ehci->tt_list);
+
+ if (HCC_PGM_FRAMELISTLEN(hcc_params)) {
+ /* periodic schedule size can be smaller than default */
+ switch (EHCI_TUNE_FLS) {
+ case 0: ehci->periodic_size = 1024; break;
+ case 1: ehci->periodic_size = 512; break;
+ case 2: ehci->periodic_size = 256; break;
+ default: BUG();
+ }
+ }
+ if ((retval = ehci_mem_init(ehci, GFP_KERNEL)) < 0)
+ return retval;
+
+ /* controllers may cache some of the periodic schedule ... */
+ if (HCC_ISOC_CACHE(hcc_params)) // full frame cache
+ ehci->i_thresh = 0;
+ else // N microframes cached
+ ehci->i_thresh = 2 + HCC_ISOC_THRES(hcc_params);
+
+ /*
+ * dedicate a qh for the async ring head, since we couldn't unlink
+ * a 'real' qh without stopping the async schedule [4.8]. use it
+ * as the 'reclamation list head' too.
+ * its dummy is used in hw_alt_next of many tds, to prevent the qh
+ * from automatically advancing to the next td after short reads.
+ */
+ ehci->async->qh_next.qh = NULL;
+ hw = ehci->async->hw;
+ hw->hw_next = QH_NEXT(ehci, ehci->async->qh_dma);
+ hw->hw_info1 = cpu_to_hc32(ehci, QH_HEAD);
+#if defined(CONFIG_PPC_PS3)
+ hw->hw_info1 |= cpu_to_hc32(ehci, QH_INACTIVATE);
+#endif
+ hw->hw_token = cpu_to_hc32(ehci, QTD_STS_HALT);
+ hw->hw_qtd_next = EHCI_LIST_END(ehci);
+ ehci->async->qh_state = QH_STATE_LINKED;
+ hw->hw_alt_next = QTD_NEXT(ehci, ehci->async->dummy->qtd_dma);
+
+ /* clear interrupt enables, set irq latency */
+ if (log2_irq_thresh < 0 || log2_irq_thresh > 6)
+ log2_irq_thresh = 0;
+ temp = 1 << (16 + log2_irq_thresh);
+ if (HCC_PER_PORT_CHANGE_EVENT(hcc_params)) {
+ ehci->has_ppcd = 1;
+ ehci_dbg(ehci, "enable per-port change event\n");
+ temp |= CMD_PPCEE;
+ }
+ if (HCC_CANPARK(hcc_params)) {
+ /* HW default park == 3, on hardware that supports it (like
+ * NVidia and ALI silicon), maximizes throughput on the async
+ * schedule by avoiding QH fetches between transfers.
+ *
+ * With fast usb storage devices and NForce2, "park" seems to
+ * make problems: throughput reduction (!), data errors...
+ */
+ if (park) {
+ park = min(park, (unsigned) 3);
+ temp |= CMD_PARK;
+ temp |= park << 8;
+ }
+ ehci_dbg(ehci, "park %d\n", park);
+ }
+ if (HCC_PGM_FRAMELISTLEN(hcc_params)) {
+ /* periodic schedule size can be smaller than default */
+ temp &= ~(3 << 2);
+ temp |= (EHCI_TUNE_FLS << 2);
+ }
+ ehci->command = temp;
+
+ /* Accept arbitrarily long scatter-gather lists */
+ if (!(hcd->driver->flags & HCD_LOCAL_MEM))
+ hcd->self.sg_tablesize = ~0;
+ return 0;
+}
+
+/* start HC running; it's halted, ehci_init() has been run (once) */
+static int ehci_run (struct usb_hcd *hcd)
+{
+ struct ehci_hcd *ehci = hcd_to_ehci (hcd);
+ u32 temp;
+ u32 hcc_params;
+
+ hcd->uses_new_polling = 1;
+
+ /* EHCI spec section 4.1 */
+
+ ehci_writel(ehci, ehci->periodic_dma, &ehci->regs->frame_list);
+ ehci_writel(ehci, (u32)ehci->async->qh_dma, &ehci->regs->async_next);
+
+ /*
+ * hcc_params controls whether ehci->regs->segment must (!!!)
+ * be used; it constrains QH/ITD/SITD and QTD locations.
+ * pci_pool consistent memory always uses segment zero.
+ * streaming mappings for I/O buffers, like pci_map_single(),
+ * can return segments above 4GB, if the device allows.
+ *
+ * NOTE: the dma mask is visible through dma_supported(), so
+ * drivers can pass this info along ... like NETIF_F_HIGHDMA,
+ * Scsi_Host.highmem_io, and so forth. It's readonly to all
+ * host side drivers though.
+ */
+ hcc_params = ehci_readl(ehci, &ehci->caps->hcc_params);
+ if (HCC_64BIT_ADDR(hcc_params)) {
+ ehci_writel(ehci, 0, &ehci->regs->segment);
+#if 0
+// this is deeply broken on almost all architectures
+ if (!dma_set_mask(hcd->self.controller, DMA_BIT_MASK(64)))
+ ehci_info(ehci, "enabled 64bit DMA\n");
+#endif
+ }
+
+
+ // Philips, Intel, and maybe others need CMD_RUN before the
+ // root hub will detect new devices (why?); NEC doesn't
+ ehci->command &= ~(CMD_LRESET|CMD_IAAD|CMD_PSE|CMD_ASE|CMD_RESET);
+ ehci->command |= CMD_RUN;
+ ehci_writel(ehci, ehci->command, &ehci->regs->command);
+ dbg_cmd (ehci, "init", ehci->command);
+
+ /*
+ * Start, enabling full USB 2.0 functionality ... usb 1.1 devices
+ * are explicitly handed to companion controller(s), so no TT is
+ * involved with the root hub. (Except where one is integrated,
+ * and there's no companion controller unless maybe for USB OTG.)
+ *
+ * Turning on the CF flag will transfer ownership of all ports
+ * from the companions to the EHCI controller. If any of the
+ * companions are in the middle of a port reset at the time, it
+ * could cause trouble. Write-locking ehci_cf_port_reset_rwsem
+ * guarantees that no resets are in progress. After we set CF,
+ * a short delay lets the hardware catch up; new resets shouldn't
+ * be started before the port switching actions could complete.
+ */
+ down_write(&ehci_cf_port_reset_rwsem);
+ ehci->rh_state = EHCI_RH_RUNNING;
+ ehci_writel(ehci, FLAG_CF, &ehci->regs->configured_flag);
+ ehci_readl(ehci, &ehci->regs->command); /* unblock posted writes */
+ msleep(5);
+ up_write(&ehci_cf_port_reset_rwsem);
+ ehci->last_periodic_enable = ktime_get_real();
+
+ temp = HC_VERSION(ehci, ehci_readl(ehci, &ehci->caps->hc_capbase));
+ ehci_info (ehci,
+ "USB %x.%x started, EHCI %x.%02x%s\n",
+ ((ehci->sbrn & 0xf0)>>4), (ehci->sbrn & 0x0f),
+ temp >> 8, temp & 0xff,
+ ignore_oc ? ", overcurrent ignored" : "");
+
+ ehci_writel(ehci, INTR_MASK,
+ &ehci->regs->intr_enable); /* Turn On Interrupts */
+
+ /* GRR this is run-once init(), being done every time the HC starts.
+ * So long as they're part of class devices, we can't do it init()
+ * since the class device isn't created that early.
+ */
+ create_debug_files(ehci);
+ create_sysfs_files(ehci);
+
+ return 0;
+}
+
+int ehci_setup(struct usb_hcd *hcd)
+{
+ struct ehci_hcd *ehci = hcd_to_ehci(hcd);
+ int retval;
+
+ ehci->regs = (void __iomem *)ehci->caps +
+ HC_LENGTH(ehci, ehci_readl(ehci, &ehci->caps->hc_capbase));
+ dbg_hcs_params(ehci, "reset");
+ dbg_hcc_params(ehci, "reset");
+
+ /* cache this readonly data; minimize chip reads */
+ ehci->hcs_params = ehci_readl(ehci, &ehci->caps->hcs_params);
+
+ ehci->sbrn = HCD_USB2;
+
+ /* data structure init */
+ retval = ehci_init(hcd);
+ if (retval)
+ return retval;
+
+ retval = ehci_halt(ehci);
+ if (retval)
+ return retval;
+
+ ehci_reset(ehci);
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(ehci_setup);
+
+/*-------------------------------------------------------------------------*/
+
+static irqreturn_t ehci_irq (struct usb_hcd *hcd)
+{
+ struct ehci_hcd *ehci = hcd_to_ehci (hcd);
+ u32 status, masked_status, pcd_status = 0, cmd;
+ int bh;
+ unsigned long flags;
+
+ /*
+ * For threadirqs option we use spin_lock_irqsave() variant to prevent
+ * deadlock with ehci hrtimer callback, because hrtimer callbacks run
+ * in interrupt context even when threadirqs is specified. We can go
+ * back to spin_lock() variant when hrtimer callbacks become threaded.
+ */
+ spin_lock_irqsave(&ehci->lock, flags);
+
+ status = ehci_readl(ehci, &ehci->regs->status);
+
+ /* e.g. cardbus physical eject */
+ if (status == ~(u32) 0) {
+ ehci_dbg (ehci, "device removed\n");
+ goto dead;
+ }
+
+ /*
+ * We don't use STS_FLR, but some controllers don't like it to
+ * remain on, so mask it out along with the other status bits.
+ */
+ masked_status = status & (INTR_MASK | STS_FLR);
+
+ /* Shared IRQ? */
+ if (!masked_status || unlikely(ehci->rh_state == EHCI_RH_HALTED)) {
+ spin_unlock_irqrestore(&ehci->lock, flags);
+ return IRQ_NONE;
+ }
+
+ /* clear (just) interrupts */
+ ehci_writel(ehci, masked_status, &ehci->regs->status);
+ cmd = ehci_readl(ehci, &ehci->regs->command);
+ bh = 0;
+
+ /* normal [4.15.1.2] or error [4.15.1.1] completion */
+ if (likely ((status & (STS_INT|STS_ERR)) != 0)) {
+ if (likely ((status & STS_ERR) == 0))
+ COUNT (ehci->stats.normal);
+ else
+ COUNT (ehci->stats.error);
+ bh = 1;
+ }
+
+ /* complete the unlinking of some qh [4.15.2.3] */
+ if (status & STS_IAA) {
+
+ /* Turn off the IAA watchdog */
+ ehci->enabled_hrtimer_events &= ~BIT(EHCI_HRTIMER_IAA_WATCHDOG);
+
+ /*
+ * Mild optimization: Allow another IAAD to reset the
+ * hrtimer, if one occurs before the next expiration.
+ * In theory we could always cancel the hrtimer, but
+ * tests show that about half the time it will be reset
+ * for some other event anyway.
+ */
+ if (ehci->next_hrtimer_event == EHCI_HRTIMER_IAA_WATCHDOG)
+ ++ehci->next_hrtimer_event;
+
+ /* guard against (alleged) silicon errata */
+ if (cmd & CMD_IAAD)
+ ehci_dbg(ehci, "IAA with IAAD still set?\n");
+ if (ehci->iaa_in_progress)
+ COUNT(ehci->stats.iaa);
+ end_unlink_async(ehci);
+ }
+
+ /* remote wakeup [4.3.1] */
+ if (status & STS_PCD) {
+ unsigned i = HCS_N_PORTS (ehci->hcs_params);
+ u32 ppcd = ~0;
+
+ /* kick root hub later */
+ pcd_status = status;
+
+ /* resume root hub? */
+ if (ehci->rh_state == EHCI_RH_SUSPENDED)
+ usb_hcd_resume_root_hub(hcd);
+
+ /* get per-port change detect bits */
+ if (ehci->has_ppcd)
+ ppcd = status >> 16;
+
+ while (i--) {
+ int pstatus;
+
+ /* leverage per-port change bits feature */
+ if (!(ppcd & (1 << i)))
+ continue;
+ pstatus = ehci_readl(ehci,
+ &ehci->regs->port_status[i]);
+
+ if (pstatus & PORT_OWNER)
+ continue;
+ if (!(test_bit(i, &ehci->suspended_ports) &&
+ ((pstatus & PORT_RESUME) ||
+ !(pstatus & PORT_SUSPEND)) &&
+ (pstatus & PORT_PE) &&
+ ehci->reset_done[i] == 0))
+ continue;
+
+ /* start USB_RESUME_TIMEOUT msec resume signaling from
+ * this port, and make hub_wq collect
+ * PORT_STAT_C_SUSPEND to stop that signaling.
+ */
+ ehci->reset_done[i] = jiffies +
+ msecs_to_jiffies(USB_RESUME_TIMEOUT);
+ set_bit(i, &ehci->resuming_ports);
+ ehci_dbg (ehci, "port %d remote wakeup\n", i + 1);
+ usb_hcd_start_port_resume(&hcd->self, i);
+ mod_timer(&hcd->rh_timer, ehci->reset_done[i]);
+ }
+ }
+
+ /* PCI errors [4.15.2.4] */
+ if (unlikely ((status & STS_FATAL) != 0)) {
+ ehci_err(ehci, "fatal error\n");
+ dbg_cmd(ehci, "fatal", cmd);
+ dbg_status(ehci, "fatal", status);
+dead:
+ usb_hc_died(hcd);
+
+ /* Don't let the controller do anything more */
+ ehci->shutdown = true;
+ ehci->rh_state = EHCI_RH_STOPPING;
+ ehci->command &= ~(CMD_RUN | CMD_ASE | CMD_PSE);
+ ehci_writel(ehci, ehci->command, &ehci->regs->command);
+ ehci_writel(ehci, 0, &ehci->regs->intr_enable);
+ ehci_handle_controller_death(ehci);
+
+ /* Handle completions when the controller stops */
+ bh = 0;
+ }
+
+ if (bh)
+ ehci_work (ehci);
+ spin_unlock_irqrestore(&ehci->lock, flags);
+ if (pcd_status)
+ usb_hcd_poll_rh_status(hcd);
+ return IRQ_HANDLED;
+}
+
+/*-------------------------------------------------------------------------*/
+
+/*
+ * non-error returns are a promise to giveback() the urb later
+ * we drop ownership so next owner (or urb unlink) can get it
+ *
+ * urb + dev is in hcd.self.controller.urb_list
+ * we're queueing TDs onto software and hardware lists
+ *
+ * hcd-specific init for hcpriv hasn't been done yet
+ *
+ * NOTE: control, bulk, and interrupt share the same code to append TDs
+ * to a (possibly active) QH, and the same QH scanning code.
+ */
+static int ehci_urb_enqueue (
+ struct usb_hcd *hcd,
+ struct urb *urb,
+ gfp_t mem_flags
+) {
+ struct ehci_hcd *ehci = hcd_to_ehci (hcd);
+ struct list_head qtd_list;
+
+ INIT_LIST_HEAD (&qtd_list);
+
+ switch (usb_pipetype (urb->pipe)) {
+ case PIPE_CONTROL:
+ /* qh_completions() code doesn't handle all the fault cases
+ * in multi-TD control transfers. Even 1KB is rare anyway.
+ */
+ if (urb->transfer_buffer_length > (16 * 1024))
+ return -EMSGSIZE;
+ /* FALLTHROUGH */
+ /* case PIPE_BULK: */
+ default:
+ if (!qh_urb_transaction (ehci, urb, &qtd_list, mem_flags))
+ return -ENOMEM;
+ return submit_async(ehci, urb, &qtd_list, mem_flags);
+
+ case PIPE_INTERRUPT:
+ if (!qh_urb_transaction (ehci, urb, &qtd_list, mem_flags))
+ return -ENOMEM;
+ return intr_submit(ehci, urb, &qtd_list, mem_flags);
+
+ case PIPE_ISOCHRONOUS:
+ if (urb->dev->speed == USB_SPEED_HIGH)
+ return itd_submit (ehci, urb, mem_flags);
+ else
+ return sitd_submit (ehci, urb, mem_flags);
+ }
+}
+
+/* remove from hardware lists
+ * completions normally happen asynchronously
+ */
+
+static int ehci_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status)
+{
+ struct ehci_hcd *ehci = hcd_to_ehci (hcd);
+ struct ehci_qh *qh;
+ unsigned long flags;
+ int rc;
+
+ spin_lock_irqsave (&ehci->lock, flags);
+ rc = usb_hcd_check_unlink_urb(hcd, urb, status);
+ if (rc)
+ goto done;
+
+ if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS) {
+ /*
+ * We don't expedite dequeue for isochronous URBs.
+ * Just wait until they complete normally or their
+ * time slot expires.
+ */
+ } else {
+ qh = (struct ehci_qh *) urb->hcpriv;
+ qh->exception = 1;
+ switch (qh->qh_state) {
+ case QH_STATE_LINKED:
+ if (usb_pipetype(urb->pipe) == PIPE_INTERRUPT)
+ start_unlink_intr(ehci, qh);
+ else
+ start_unlink_async(ehci, qh);
+ break;
+ case QH_STATE_COMPLETING:
+ qh->dequeue_during_giveback = 1;
+ break;
+ case QH_STATE_UNLINK:
+ case QH_STATE_UNLINK_WAIT:
+ /* already started */
+ break;
+ case QH_STATE_IDLE:
+ /* QH might be waiting for a Clear-TT-Buffer */
+ qh_completions(ehci, qh);
+ break;
+ }
+ }
+done:
+ spin_unlock_irqrestore (&ehci->lock, flags);
+ return rc;
+}
+
+/*-------------------------------------------------------------------------*/
+
+// bulk qh holds the data toggle
+
+static void
+ehci_endpoint_disable (struct usb_hcd *hcd, struct usb_host_endpoint *ep)
+{
+ struct ehci_hcd *ehci = hcd_to_ehci (hcd);
+ unsigned long flags;
+ struct ehci_qh *qh;
+
+ /* ASSERT: any requests/urbs are being unlinked */
+ /* ASSERT: nobody can be submitting urbs for this any more */
+
+rescan:
+ spin_lock_irqsave (&ehci->lock, flags);
+ qh = ep->hcpriv;
+ if (!qh)
+ goto done;
+
+ /* endpoints can be iso streams. for now, we don't
+ * accelerate iso completions ... so spin a while.
+ */
+ if (qh->hw == NULL) {
+ struct ehci_iso_stream *stream = ep->hcpriv;
+
+ if (!list_empty(&stream->td_list))
+ goto idle_timeout;
+
+ /* BUG_ON(!list_empty(&stream->free_list)); */
+ reserve_release_iso_bandwidth(ehci, stream, -1);
+ kfree(stream);
+ goto done;
+ }
+
+ qh->exception = 1;
+ switch (qh->qh_state) {
+ case QH_STATE_LINKED:
+ WARN_ON(!list_empty(&qh->qtd_list));
+ if (usb_endpoint_type(&ep->desc) != USB_ENDPOINT_XFER_INT)
+ start_unlink_async(ehci, qh);
+ else
+ start_unlink_intr(ehci, qh);
+ /* FALL THROUGH */
+ case QH_STATE_COMPLETING: /* already in unlinking */
+ case QH_STATE_UNLINK: /* wait for hw to finish? */
+ case QH_STATE_UNLINK_WAIT:
+idle_timeout:
+ spin_unlock_irqrestore (&ehci->lock, flags);
+ schedule_timeout_uninterruptible(1);
+ goto rescan;
+ case QH_STATE_IDLE: /* fully unlinked */
+ if (qh->clearing_tt)
+ goto idle_timeout;
+ if (list_empty (&qh->qtd_list)) {
+ if (qh->ps.bw_uperiod)
+ reserve_release_intr_bandwidth(ehci, qh, -1);
+ qh_destroy(ehci, qh);
+ break;
+ }
+ /* else FALL THROUGH */
+ default:
+ /* caller was supposed to have unlinked any requests;
+ * that's not our job. just leak this memory.
+ */
+ ehci_err (ehci, "qh %p (#%02x) state %d%s\n",
+ qh, ep->desc.bEndpointAddress, qh->qh_state,
+ list_empty (&qh->qtd_list) ? "" : "(has tds)");
+ break;
+ }
+ done:
+ ep->hcpriv = NULL;
+ spin_unlock_irqrestore (&ehci->lock, flags);
+}
+
+static void
+ehci_endpoint_reset(struct usb_hcd *hcd, struct usb_host_endpoint *ep)
+{
+ struct ehci_hcd *ehci = hcd_to_ehci(hcd);
+ struct ehci_qh *qh;
+ int eptype = usb_endpoint_type(&ep->desc);
+ int epnum = usb_endpoint_num(&ep->desc);
+ int is_out = usb_endpoint_dir_out(&ep->desc);
+ unsigned long flags;
+
+ if (eptype != USB_ENDPOINT_XFER_BULK && eptype != USB_ENDPOINT_XFER_INT)
+ return;
+
+ spin_lock_irqsave(&ehci->lock, flags);
+ qh = ep->hcpriv;
+
+ /* For Bulk and Interrupt endpoints we maintain the toggle state
+ * in the hardware; the toggle bits in udev aren't used at all.
+ * When an endpoint is reset by usb_clear_halt() we must reset
+ * the toggle bit in the QH.
+ */
+ if (qh) {
+ if (!list_empty(&qh->qtd_list)) {
+ WARN_ONCE(1, "clear_halt for a busy endpoint\n");
+ } else {
+ /* The toggle value in the QH can't be updated
+ * while the QH is active. Unlink it now;
+ * re-linking will call qh_refresh().
+ */
+ usb_settoggle(qh->ps.udev, epnum, is_out, 0);
+ qh->exception = 1;
+ if (eptype == USB_ENDPOINT_XFER_BULK)
+ start_unlink_async(ehci, qh);
+ else
+ start_unlink_intr(ehci, qh);
+ }
+ }
+ spin_unlock_irqrestore(&ehci->lock, flags);
+}
+
+static int ehci_get_frame (struct usb_hcd *hcd)
+{
+ struct ehci_hcd *ehci = hcd_to_ehci (hcd);
+ return (ehci_read_frame_index(ehci) >> 3) % ehci->periodic_size;
+}
+
+/*-------------------------------------------------------------------------*/
+
+/* Device addition and removal */
+
+static void ehci_remove_device(struct usb_hcd *hcd, struct usb_device *udev)
+{
+ struct ehci_hcd *ehci = hcd_to_ehci(hcd);
+
+ spin_lock_irq(&ehci->lock);
+ drop_tt(udev);
+ spin_unlock_irq(&ehci->lock);
+}
+
+/*-------------------------------------------------------------------------*/
+
+#ifdef CONFIG_PM
+
+/* suspend/resume, section 4.3 */
+
+/* These routines handle the generic parts of controller suspend/resume */
+
+int ehci_suspend(struct usb_hcd *hcd, bool do_wakeup)
+{
+ struct ehci_hcd *ehci = hcd_to_ehci(hcd);
+
+ if (time_before(jiffies, ehci->next_statechange))
+ msleep(10);
+
+ /*
+ * Root hub was already suspended. Disable IRQ emission and
+ * mark HW unaccessible. The PM and USB cores make sure that
+ * the root hub is either suspended or stopped.
+ */
+ ehci_prepare_ports_for_controller_suspend(ehci, do_wakeup);
+
+ spin_lock_irq(&ehci->lock);
+ ehci_writel(ehci, 0, &ehci->regs->intr_enable);
+ (void) ehci_readl(ehci, &ehci->regs->intr_enable);
+
+ clear_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
+ spin_unlock_irq(&ehci->lock);
+
+ synchronize_irq(hcd->irq);
+
+ /* Check for race with a wakeup request */
+ if (do_wakeup && HCD_WAKEUP_PENDING(hcd)) {
+ ehci_resume(hcd, false);
+ return -EBUSY;
+ }
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(ehci_suspend);
+
+/* Returns 0 if power was preserved, 1 if power was lost */
+int ehci_resume(struct usb_hcd *hcd, bool force_reset)
+{
+ struct ehci_hcd *ehci = hcd_to_ehci(hcd);
+
+ if (time_before(jiffies, ehci->next_statechange))
+ msleep(100);
+
+ /* Mark hardware accessible again as we are back to full power by now */
+ set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
+
+ if (ehci->shutdown)
+ return 0; /* Controller is dead */
+
+ /*
+ * If CF is still set and reset isn't forced
+ * then we maintained suspend power.
+ * Just undo the effect of ehci_suspend().
+ */
+ if (ehci_readl(ehci, &ehci->regs->configured_flag) == FLAG_CF &&
+ !force_reset) {
+ int mask = INTR_MASK;
+
+ ehci_prepare_ports_for_controller_resume(ehci);
+
+ spin_lock_irq(&ehci->lock);
+ if (ehci->shutdown)
+ goto skip;
+
+ if (!hcd->self.root_hub->do_remote_wakeup)
+ mask &= ~STS_PCD;
+ ehci_writel(ehci, mask, &ehci->regs->intr_enable);
+ ehci_readl(ehci, &ehci->regs->intr_enable);
+ skip:
+ spin_unlock_irq(&ehci->lock);
+ return 0;
+ }
+
+ /*
+ * Else reset, to cope with power loss or resume from hibernation
+ * having let the firmware kick in during reboot.
+ */
+ usb_root_hub_lost_power(hcd->self.root_hub);
+ (void) ehci_halt(ehci);
+ (void) ehci_reset(ehci);
+
+ spin_lock_irq(&ehci->lock);
+ if (ehci->shutdown)
+ goto skip;
+
+ ehci_writel(ehci, ehci->command, &ehci->regs->command);
+ ehci_writel(ehci, FLAG_CF, &ehci->regs->configured_flag);
+ ehci_readl(ehci, &ehci->regs->command); /* unblock posted writes */
+
+ ehci->rh_state = EHCI_RH_SUSPENDED;
+ spin_unlock_irq(&ehci->lock);
+
+ return 1;
+}
+EXPORT_SYMBOL_GPL(ehci_resume);
+
+#endif
+
+/*-------------------------------------------------------------------------*/
+
+/*
+ * Generic structure: This gets copied for platform drivers so that
+ * individual entries can be overridden as needed.
+ */
+
+static const struct hc_driver ehci_hc_driver = {
+ .description = hcd_name,
+ .product_desc = "EHCI Host Controller",
+ .hcd_priv_size = sizeof(struct ehci_hcd),
+
+ /*
+ * generic hardware linkage
+ */
+ .irq = ehci_irq,
+ .flags = HCD_MEMORY | HCD_USB2 | HCD_BH,
+
+ /*
+ * basic lifecycle operations
+ */
+ .reset = ehci_setup,
+ .start = ehci_run,
+ .stop = ehci_stop,
+ .shutdown = ehci_shutdown,
+
+ /*
+ * managing i/o requests and associated device resources
+ */
+ .urb_enqueue = ehci_urb_enqueue,
+ .urb_dequeue = ehci_urb_dequeue,
+ .endpoint_disable = ehci_endpoint_disable,
+ .endpoint_reset = ehci_endpoint_reset,
+ .clear_tt_buffer_complete = ehci_clear_tt_buffer_complete,
+
+ /*
+ * scheduling support
+ */
+ .get_frame_number = ehci_get_frame,
+
+ /*
+ * root hub support
+ */
+ .hub_status_data = ehci_hub_status_data,
+ .hub_control = ehci_hub_control,
+ .bus_suspend = ehci_bus_suspend,
+ .bus_resume = ehci_bus_resume,
+ .relinquish_port = ehci_relinquish_port,
+ .port_handed_over = ehci_port_handed_over,
+
+ /*
+ * device support
+ */
+ .free_dev = ehci_remove_device,
+};
+
+void ehci_init_driver(struct hc_driver *drv,
+ const struct ehci_driver_overrides *over)
+{
+ /* Copy the generic table to drv and then apply the overrides */
+ *drv = ehci_hc_driver;
+
+ if (over) {
+ drv->hcd_priv_size += over->extra_priv_size;
+ if (over->reset)
+ drv->reset = over->reset;
+ if (over->port_power)
+ drv->port_power = over->port_power;
+ }
+}
+EXPORT_SYMBOL_GPL(ehci_init_driver);
+
+/*-------------------------------------------------------------------------*/
+
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_AUTHOR (DRIVER_AUTHOR);
+MODULE_LICENSE ("GPL");
+
+#ifdef CONFIG_USB_EHCI_FSL
+#include "ehci-fsl.c"
+#define PLATFORM_DRIVER ehci_fsl_driver
+#endif
+
+#ifdef CONFIG_USB_EHCI_SH
+#include "ehci-sh.c"
+#define PLATFORM_DRIVER ehci_hcd_sh_driver
+#endif
+
+#ifdef CONFIG_PPC_PS3
+#include "ehci-ps3.c"
+#define PS3_SYSTEM_BUS_DRIVER ps3_ehci_driver
+#endif
+
+#ifdef CONFIG_USB_EHCI_HCD_PPC_OF
+#include "ehci-ppc-of.c"
+#define OF_PLATFORM_DRIVER ehci_hcd_ppc_of_driver
+#endif
+
+#ifdef CONFIG_XPS_USB_HCD_XILINX
+#include "ehci-xilinx-of.c"
+#define XILINX_OF_PLATFORM_DRIVER ehci_hcd_xilinx_of_driver
+#endif
+
+#ifdef CONFIG_TILE_USB
+#include "ehci-tilegx.c"
+#define PLATFORM_DRIVER ehci_hcd_tilegx_driver
+#endif
+
+#ifdef CONFIG_USB_EHCI_HCD_PMC_MSP
+#include "ehci-pmcmsp.c"
+#define PLATFORM_DRIVER ehci_hcd_msp_driver
+#endif
+
+#ifdef CONFIG_SPARC_LEON
+#include "ehci-grlib.c"
+#define PLATFORM_DRIVER ehci_grlib_driver
+#endif
+
+#ifdef CONFIG_USB_EHCI_MV
+#include "ehci-mv.c"
+#define PLATFORM_DRIVER ehci_mv_driver
+#endif
+
+#ifdef CONFIG_MIPS_SEAD3
+#include "ehci-sead3.c"
+#define PLATFORM_DRIVER ehci_hcd_sead3_driver
+#endif
+
+static int __init ehci_hcd_init(void)
+{
+ int retval = 0;
+
+ if (usb_disabled())
+ return -ENODEV;
+
+ printk(KERN_INFO "%s: " DRIVER_DESC "\n", hcd_name);
+ set_bit(USB_EHCI_LOADED, &usb_hcds_loaded);
+ if (test_bit(USB_UHCI_LOADED, &usb_hcds_loaded) ||
+ test_bit(USB_OHCI_LOADED, &usb_hcds_loaded))
+ printk(KERN_WARNING "Warning! ehci_hcd should always be loaded"
+ " before uhci_hcd and ohci_hcd, not after\n");
+
+ pr_debug("%s: block sizes: qh %Zd qtd %Zd itd %Zd sitd %Zd\n",
+ hcd_name,
+ sizeof(struct ehci_qh), sizeof(struct ehci_qtd),
+ sizeof(struct ehci_itd), sizeof(struct ehci_sitd));
+
+#ifdef CONFIG_DYNAMIC_DEBUG
+ ehci_debug_root = debugfs_create_dir("ehci", usb_debug_root);
+ if (!ehci_debug_root) {
+ retval = -ENOENT;
+ goto err_debug;
+ }
+#endif
+
+#ifdef PLATFORM_DRIVER
+ retval = platform_driver_register(&PLATFORM_DRIVER);
+ if (retval < 0)
+ goto clean0;
+#endif
+
+#ifdef PS3_SYSTEM_BUS_DRIVER
+ retval = ps3_ehci_driver_register(&PS3_SYSTEM_BUS_DRIVER);
+ if (retval < 0)
+ goto clean2;
+#endif
+
+#ifdef OF_PLATFORM_DRIVER
+ retval = platform_driver_register(&OF_PLATFORM_DRIVER);
+ if (retval < 0)
+ goto clean3;
+#endif
+
+#ifdef XILINX_OF_PLATFORM_DRIVER
+ retval = platform_driver_register(&XILINX_OF_PLATFORM_DRIVER);
+ if (retval < 0)
+ goto clean4;
+#endif
+ return retval;
+
+#ifdef XILINX_OF_PLATFORM_DRIVER
+ /* platform_driver_unregister(&XILINX_OF_PLATFORM_DRIVER); */
+clean4:
+#endif
+#ifdef OF_PLATFORM_DRIVER
+ platform_driver_unregister(&OF_PLATFORM_DRIVER);
+clean3:
+#endif
+#ifdef PS3_SYSTEM_BUS_DRIVER
+ ps3_ehci_driver_unregister(&PS3_SYSTEM_BUS_DRIVER);
+clean2:
+#endif
+#ifdef PLATFORM_DRIVER
+ platform_driver_unregister(&PLATFORM_DRIVER);
+clean0:
+#endif
+#ifdef CONFIG_DYNAMIC_DEBUG
+ debugfs_remove(ehci_debug_root);
+ ehci_debug_root = NULL;
+err_debug:
+#endif
+ clear_bit(USB_EHCI_LOADED, &usb_hcds_loaded);
+ return retval;
+}
+module_init(ehci_hcd_init);
+
+static void __exit ehci_hcd_cleanup(void)
+{
+#ifdef XILINX_OF_PLATFORM_DRIVER
+ platform_driver_unregister(&XILINX_OF_PLATFORM_DRIVER);
+#endif
+#ifdef OF_PLATFORM_DRIVER
+ platform_driver_unregister(&OF_PLATFORM_DRIVER);
+#endif
+#ifdef PLATFORM_DRIVER
+ platform_driver_unregister(&PLATFORM_DRIVER);
+#endif
+#ifdef PS3_SYSTEM_BUS_DRIVER
+ ps3_ehci_driver_unregister(&PS3_SYSTEM_BUS_DRIVER);
+#endif
+#ifdef CONFIG_DYNAMIC_DEBUG
+ debugfs_remove(ehci_debug_root);
+#endif
+ clear_bit(USB_EHCI_LOADED, &usb_hcds_loaded);
+}
+module_exit(ehci_hcd_cleanup);