diff options
Diffstat (limited to 'drivers/usb/host/sl811.h')
| -rw-r--r-- | drivers/usb/host/sl811.h | 249 |
1 files changed, 249 insertions, 0 deletions
diff --git a/drivers/usb/host/sl811.h b/drivers/usb/host/sl811.h new file mode 100644 index 000000000..1e23ef49b --- /dev/null +++ b/drivers/usb/host/sl811.h @@ -0,0 +1,249 @@ +/* + * SL811HS register declarations and HCD data structures + * + * Copyright (C) 2004 Psion Teklogix + * Copyright (C) 2004 David Brownell + * Copyright (C) 2001 Cypress Semiconductor Inc. + */ + +/* + * SL811HS has transfer registers, and control registers. In host/master + * mode one set of registers is used; in peripheral/slave mode, another. + * - SL11H only has some "A" transfer registers from 0x00-0x04 + * - SL811HS also has "B" registers from 0x08-0x0c + * - SL811S (or HS in slave mode) has four A+B sets, at 00, 10, 20, 30 + */ + +#define SL811_EP_A(base) ((base) + 0) +#define SL811_EP_B(base) ((base) + 8) + +#define SL811_HOST_BUF 0x00 +#define SL811_PERIPH_EP0 0x00 +#define SL811_PERIPH_EP1 0x10 +#define SL811_PERIPH_EP2 0x20 +#define SL811_PERIPH_EP3 0x30 + + +/* TRANSFER REGISTERS: host and peripheral sides are similar + * except for the control models (master vs slave). + */ +#define SL11H_HOSTCTLREG 0 +# define SL11H_HCTLMASK_ARM 0x01 +# define SL11H_HCTLMASK_ENABLE 0x02 +# define SL11H_HCTLMASK_IN 0x00 +# define SL11H_HCTLMASK_OUT 0x04 +# define SL11H_HCTLMASK_ISOCH 0x10 +# define SL11H_HCTLMASK_AFTERSOF 0x20 +# define SL11H_HCTLMASK_TOGGLE 0x40 +# define SL11H_HCTLMASK_PREAMBLE 0x80 +#define SL11H_BUFADDRREG 1 +#define SL11H_BUFLNTHREG 2 +#define SL11H_PKTSTATREG 3 /* read */ +# define SL11H_STATMASK_ACK 0x01 +# define SL11H_STATMASK_ERROR 0x02 +# define SL11H_STATMASK_TMOUT 0x04 +# define SL11H_STATMASK_SEQ 0x08 +# define SL11H_STATMASK_SETUP 0x10 +# define SL11H_STATMASK_OVF 0x20 +# define SL11H_STATMASK_NAK 0x40 +# define SL11H_STATMASK_STALL 0x80 +#define SL11H_PIDEPREG 3 /* write */ +# define SL_SETUP 0xd0 +# define SL_IN 0x90 +# define SL_OUT 0x10 +# define SL_SOF 0x50 +# define SL_PREAMBLE 0xc0 +# define SL_NAK 0xa0 +# define SL_STALL 0xe0 +# define SL_DATA0 0x30 +# define SL_DATA1 0xb0 +#define SL11H_XFERCNTREG 4 /* read */ +#define SL11H_DEVADDRREG 4 /* write */ + + +/* CONTROL REGISTERS: host and peripheral are very different. + */ +#define SL11H_CTLREG1 5 +# define SL11H_CTL1MASK_SOF_ENA 0x01 +# define SL11H_CTL1MASK_FORCE 0x18 +# define SL11H_CTL1MASK_NORMAL 0x00 +# define SL11H_CTL1MASK_SE0 0x08 /* reset */ +# define SL11H_CTL1MASK_J 0x10 +# define SL11H_CTL1MASK_K 0x18 /* resume */ +# define SL11H_CTL1MASK_LSPD 0x20 +# define SL11H_CTL1MASK_SUSPEND 0x40 +#define SL11H_IRQ_ENABLE 6 +# define SL11H_INTMASK_DONE_A 0x01 +# define SL11H_INTMASK_DONE_B 0x02 +# define SL11H_INTMASK_SOFINTR 0x10 +# define SL11H_INTMASK_INSRMV 0x20 /* to/from SE0 */ +# define SL11H_INTMASK_RD 0x40 +# define SL11H_INTMASK_DP 0x80 /* only in INTSTATREG */ +#define SL11S_ADDRESS 7 + +/* 0x08-0x0c are for the B buffer (not in SL11) */ + +#define SL11H_IRQ_STATUS 0x0D /* write to ack */ +#define SL11H_HWREVREG 0x0E /* read */ +# define SL11H_HWRMASK_HWREV 0xF0 +#define SL11H_SOFLOWREG 0x0E /* write */ +#define SL11H_SOFTMRREG 0x0F /* read */ + +/* a write to this register enables SL811HS features. + * HOST flag presumably overrides the chip input signal? + */ +#define SL811HS_CTLREG2 0x0F +# define SL811HS_CTL2MASK_SOF_MASK 0x3F +# define SL811HS_CTL2MASK_DSWAP 0x40 +# define SL811HS_CTL2MASK_HOST 0x80 + +#define SL811HS_CTL2_INIT (SL811HS_CTL2MASK_HOST | 0x2e) + + +/* DATA BUFFERS: registers from 0x10..0xff are for data buffers; + * that's 240 bytes, which we'll split evenly between A and B sides. + * Only ISO can use more than 64 bytes per packet. + * (The SL11S has 0x40..0xff for buffers.) + */ +#define H_MAXPACKET 120 /* bytes in A or B fifos */ + +#define SL11H_DATA_START 0x10 +#define SL811HS_PACKET_BUF(is_a) ((is_a) \ + ? SL11H_DATA_START \ + : (SL11H_DATA_START + H_MAXPACKET)) + +/*-------------------------------------------------------------------------*/ + +#define LOG2_PERIODIC_SIZE 5 /* arbitrary; this matches OHCI */ +#define PERIODIC_SIZE (1 << LOG2_PERIODIC_SIZE) + +struct sl811 { + spinlock_t lock; + void __iomem *addr_reg; + void __iomem *data_reg; + struct sl811_platform_data *board; + struct dentry *debug_file; + + unsigned long stat_insrmv; + unsigned long stat_wake; + unsigned long stat_sof; + unsigned long stat_a; + unsigned long stat_b; + unsigned long stat_lost; + unsigned long stat_overrun; + + /* sw model */ + struct timer_list timer; + struct sl811h_ep *next_periodic; + struct sl811h_ep *next_async; + + struct sl811h_ep *active_a; + unsigned long jiffies_a; + struct sl811h_ep *active_b; + unsigned long jiffies_b; + + u32 port1; + u8 ctrl1, ctrl2, irq_enable; + u16 frame; + + /* async schedule: control, bulk */ + struct list_head async; + + /* periodic schedule: interrupt, iso */ + u16 load[PERIODIC_SIZE]; + struct sl811h_ep *periodic[PERIODIC_SIZE]; + unsigned periodic_count; +}; + +static inline struct sl811 *hcd_to_sl811(struct usb_hcd *hcd) +{ + return (struct sl811 *) (hcd->hcd_priv); +} + +static inline struct usb_hcd *sl811_to_hcd(struct sl811 *sl811) +{ + return container_of((void *) sl811, struct usb_hcd, hcd_priv); +} + +struct sl811h_ep { + struct usb_host_endpoint *hep; + struct usb_device *udev; + + u8 defctrl; + u8 maxpacket; + u8 epnum; + u8 nextpid; + + u16 error_count; + u16 nak_count; + u16 length; /* of current packet */ + + /* periodic schedule */ + u16 period; + u16 branch; + u16 load; + struct sl811h_ep *next; + + /* async schedule */ + struct list_head schedule; +}; + +/*-------------------------------------------------------------------------*/ + +/* These register utilities should work for the SL811S register API too + * NOTE: caller must hold sl811->lock. + */ + +static inline u8 sl811_read(struct sl811 *sl811, int reg) +{ + writeb(reg, sl811->addr_reg); + return readb(sl811->data_reg); +} + +static inline void sl811_write(struct sl811 *sl811, int reg, u8 val) +{ + writeb(reg, sl811->addr_reg); + writeb(val, sl811->data_reg); +} + +static inline void +sl811_write_buf(struct sl811 *sl811, int addr, const void *buf, size_t count) +{ + const u8 *data; + void __iomem *data_reg; + + if (!count) + return; + writeb(addr, sl811->addr_reg); + + data = buf; + data_reg = sl811->data_reg; + do { + writeb(*data++, data_reg); + } while (--count); +} + +static inline void +sl811_read_buf(struct sl811 *sl811, int addr, void *buf, size_t count) +{ + u8 *data; + void __iomem *data_reg; + + if (!count) + return; + writeb(addr, sl811->addr_reg); + + data = buf; + data_reg = sl811->data_reg; + do { + *data++ = readb(data_reg); + } while (--count); +} + +/*-------------------------------------------------------------------------*/ + +#ifdef PACKET_TRACE +# define PACKET pr_debug("sl811: "stuff) +#else +# define PACKET(stuff...) do{}while(0) +#endif |