diff options
Diffstat (limited to 'drivers/usb/misc/Kconfig')
| -rw-r--r-- | drivers/usb/misc/Kconfig | 270 |
1 files changed, 270 insertions, 0 deletions
diff --git a/drivers/usb/misc/Kconfig b/drivers/usb/misc/Kconfig new file mode 100644 index 000000000..f7a7fc21b --- /dev/null +++ b/drivers/usb/misc/Kconfig @@ -0,0 +1,270 @@ +# +# USB Miscellaneous driver configuration +# +comment "USB Miscellaneous drivers" + +config USB_EMI62 + tristate "EMI 6|2m USB Audio interface support" + ---help--- + This driver loads firmware to Emagic EMI 6|2m low latency USB + Audio and Midi interface. + + After firmware load the device is handled with standard linux + USB Audio driver. + + This code is also available as a module ( = code which can be + inserted in and removed from the running kernel whenever you want). + The module will be called audio. If you want to compile it as a + module, say M here and read <file:Documentation/kbuild/modules.txt>. + +config USB_EMI26 + tristate "EMI 2|6 USB Audio interface support" + ---help--- + This driver loads firmware to Emagic EMI 2|6 low latency USB + Audio interface. + + After firmware load the device is handled with standard linux + USB Audio driver. + + To compile this driver as a module, choose M here: the + module will be called emi26. + +config USB_ADUTUX + tristate "ADU devices from Ontrak Control Systems" + help + Say Y if you want to use an ADU device from Ontrak Control + Systems. + + To compile this driver as a module, choose M here. The module + will be called adutux. + +config USB_SEVSEG + tristate "USB 7-Segment LED Display" + help + Say Y here if you have a USB 7-Segment Display by Delcom + + To compile this driver as a module, choose M here: the + module will be called usbsevseg. + +config USB_RIO500 + tristate "USB Diamond Rio500 support" + help + Say Y here if you want to connect a USB Rio500 mp3 player to your + computer's USB port. Please read <file:Documentation/usb/rio.txt> + for more information. + + To compile this driver as a module, choose M here: the + module will be called rio500. + +config USB_LEGOTOWER + tristate "USB Lego Infrared Tower support" + help + Say Y here if you want to connect a USB Lego Infrared Tower to your + computer's USB port. + + This code is also available as a module ( = code which can be + inserted in and removed from the running kernel whenever you want). + The module will be called legousbtower. If you want to compile it as + a module, say M here and read + <file:Documentation/kbuild/modules.txt>. + +config USB_LCD + tristate "USB LCD driver support" + help + Say Y here if you want to connect an USBLCD to your computer's + USB port. The USBLCD is a small USB interface board for + alphanumeric LCD modules. See <http://www.usblcd.de/> for more + information. + + To compile this driver as a module, choose M here: the + module will be called usblcd. + +config USB_LED + tristate "USB LED driver support" + help + Say Y here if you want to connect an USBLED device to your + computer's USB port. + + To compile this driver as a module, choose M here: the + module will be called usbled. + +config USB_CYPRESS_CY7C63 + tristate "Cypress CY7C63xxx USB driver support" + help + Say Y here if you want to connect a Cypress CY7C63xxx + micro controller to your computer's USB port. Currently this + driver supports the pre-programmed devices (incl. firmware) + by AK Modul-Bus Computer GmbH. + + Please see: http://www.ak-modul-bus.de/stat/mikrocontroller.html + + To compile this driver as a module, choose M here: the + module will be called cypress_cy7c63. + +config USB_CYTHERM + tristate "Cypress USB thermometer driver support" + help + Say Y here if you want to connect a Cypress USB thermometer + device to your computer's USB port. This device is also known + as the Cypress USB Starter kit or demo board. The Elektor + magazine published a modified version of this device in issue + #291. + + To compile this driver as a module, choose M here: the + module will be called cytherm. + +config USB_IDMOUSE + tristate "Siemens ID USB Mouse Fingerprint sensor support" + help + Say Y here if you want to use the fingerprint sensor on + the Siemens ID Mouse. There is also a Siemens ID Mouse + _Professional_, which has not been tested with this driver, + but uses the same sensor and may therefore work. + + This driver creates an entry "/dev/idmouseX" or "/dev/usb/idmouseX", + which can be used by, e.g.,"cat /dev/idmouse0 > fingerprint.pnm". + + See also <http://www.fs.tum.de/~echtler/idmouse/>. + +config USB_FTDI_ELAN + tristate "Elan PCMCIA CardBus Adapter USB Client" + help + ELAN's Uxxx series of adapters are USB to PCMCIA CardBus adapters. + Currently only the U132 adapter is available. + + The U132 is specifically designed for CardBus PC cards that contain + an OHCI host controller. Typical PC cards are the Orange Mobile 3G + Option GlobeTrotter Fusion card. The U132 adapter will *NOT* work + with PC cards that do not contain an OHCI controller. To use a U132 + adapter you will need this "ftdi-elan" module as well as the "u132-hcd" + module which is a USB host controller driver that talks to the OHCI + controller within CardBus card that are inserted in the U132 adapter. + + This driver has been tested with a CardBus OHCI USB adapter, and + worked with a USB PEN Drive inserted into the first USB port of + the PCCARD. A rather pointless thing to do, but useful for testing. + + See also the USB_U132_HCD entry "Elan U132 Adapter Host Controller" + + It is safe to say M here. + +config USB_APPLEDISPLAY + tristate "Apple Cinema Display support" + select BACKLIGHT_LCD_SUPPORT + select BACKLIGHT_CLASS_DEVICE + help + Say Y here if you want to control the backlight of Apple Cinema + Displays over USB. This driver provides a sysfs interface. + +source "drivers/usb/misc/sisusbvga/Kconfig" + +config USB_LD + tristate "USB LD driver" + help + This driver is for generic USB devices that use interrupt transfers, + like LD Didactic's USB devices. + + To compile this driver as a module, choose M here: the + module will be called ldusb. + +config USB_TRANCEVIBRATOR + tristate "PlayStation 2 Trance Vibrator driver support" + help + Say Y here if you want to connect a PlayStation 2 Trance Vibrator + device to your computer's USB port. + + To compile this driver as a module, choose M here: the + module will be called trancevibrator. + +config USB_IOWARRIOR + tristate "IO Warrior driver support" + help + Say Y here if you want to support the IO Warrior devices from Code + Mercenaries. This includes support for the following devices: + IO Warrior 40 + IO Warrior 24 + IO Warrior 56 + IO Warrior 24 Power Vampire + + To compile this driver as a module, choose M here: the + module will be called iowarrior. + +config USB_TEST + tristate "USB testing driver" + help + This driver is for testing host controller software. It is used + with specialized device firmware for regression and stress testing, + to help prevent problems from cropping up with "real" drivers. + + See <http://www.linux-usb.org/usbtest/> for more information, + including sample test device firmware and "how to use it". + +config USB_EHSET_TEST_FIXTURE + tristate "USB EHSET Test Fixture driver" + help + Say Y here if you want to support the special test fixture device + used for the USB-IF Embedded Host High-Speed Electrical Test procedure. + + When the test fixture is connected, it can enumerate as one of several + VID/PID pairs. This driver then initiates a corresponding test mode on + the downstream port to which the test fixture is attached. + + See <http://www.usb.org/developers/onthego/EHSET_v1.01.pdf> for more + information. + +config USB_ISIGHTFW + tristate "iSight firmware loading support" + select FW_LOADER + help + This driver loads firmware for USB Apple iSight cameras, allowing + them to be driven by the USB video class driver available at + http://linux-uvc.berlios.de + + The firmware for this driver must be extracted from the MacOS + driver beforehand. Tools for doing so are available at + http://bersace03.free.fr + +config USB_YUREX + tristate "USB YUREX driver support" + help + Say Y here if you want to connect a YUREX to your computer's + USB port. The YUREX is a leg-shakes sensor. See + <http://bbu.kayac.com/en/> for further information. + This driver supports read/write of leg-shakes counter and + fasync for the counter update via a device file /dev/yurex*. + + To compile this driver as a module, choose M here: the + module will be called yurex. + +config USB_EZUSB_FX2 + tristate "Functions for loading firmware on EZUSB chips" + help + Say Y here if you need EZUSB device support. + (Cypress FX/FX2/FX2LP microcontrollers) + +config USB_HSIC_USB3503 + tristate "USB3503 HSIC to USB20 Driver" + depends on I2C + select REGMAP_I2C + help + This option enables support for SMSC USB3503 HSIC to USB 2.0 Driver. + +config USB_LINK_LAYER_TEST + tristate "USB Link Layer Test driver" + help + This driver is for generating specific traffic for Super Speed Link + Layer Test Device. Say Y only when you want to conduct USB Super Speed + Link Layer Test for host controllers. + +config USB_CHAOSKEY + tristate "ChaosKey random number generator driver support" + depends on HW_RANDOM + help + Say Y here if you want to connect an AltusMetrum ChaosKey to + your computer's USB port. The ChaosKey is a hardware random + number generator which hooks into the kernel entropy pool to + ensure a large supply of entropy for /dev/random and + /dev/urandom and also provides direct access via /dev/chaoskeyX + + To compile this driver as a module, choose M here: the + module will be called chaoskey. |