diff options
Diffstat (limited to 'drivers/usb/misc/usbtest.c')
| -rw-r--r-- | drivers/usb/misc/usbtest.c | 233 |
1 files changed, 149 insertions, 84 deletions
diff --git a/drivers/usb/misc/usbtest.c b/drivers/usb/misc/usbtest.c index 637f3f7cf..92fdb6e9f 100644 --- a/drivers/usb/misc/usbtest.c +++ b/drivers/usb/misc/usbtest.c @@ -22,18 +22,42 @@ static void complicated_callback(struct urb *urb); /*-------------------------------------------------------------------------*/ /* FIXME make these public somewhere; usbdevfs.h? */ -struct usbtest_param { + +/* Parameter for usbtest driver. */ +struct usbtest_param_32 { /* inputs */ - unsigned test_num; /* 0..(TEST_CASES-1) */ - unsigned iterations; - unsigned length; - unsigned vary; - unsigned sglen; + __u32 test_num; /* 0..(TEST_CASES-1) */ + __u32 iterations; + __u32 length; + __u32 vary; + __u32 sglen; /* outputs */ - struct timeval duration; + __s32 duration_sec; + __s32 duration_usec; }; -#define USBTEST_REQUEST _IOWR('U', 100, struct usbtest_param) + +/* + * Compat parameter to the usbtest driver. + * This supports older user space binaries compiled with 64 bit compiler. + */ +struct usbtest_param_64 { + /* inputs */ + __u32 test_num; /* 0..(TEST_CASES-1) */ + __u32 iterations; + __u32 length; + __u32 vary; + __u32 sglen; + + /* outputs */ + __s64 duration_sec; + __s64 duration_usec; +}; + +/* IOCTL interface to the driver. */ +#define USBTEST_REQUEST_32 _IOWR('U', 100, struct usbtest_param_32) +/* COMPAT IOCTL interface to the driver. */ +#define USBTEST_REQUEST_64 _IOWR('U', 100, struct usbtest_param_64) /*-------------------------------------------------------------------------*/ @@ -1030,7 +1054,7 @@ struct ctrl_ctx { unsigned pending; int status; struct urb **urb; - struct usbtest_param *param; + struct usbtest_param_32 *param; int last; }; @@ -1155,7 +1179,7 @@ error: } static int -test_ctrl_queue(struct usbtest_dev *dev, struct usbtest_param *param) +test_ctrl_queue(struct usbtest_dev *dev, struct usbtest_param_32 *param) { struct usb_device *udev = testdev_to_usbdev(dev); struct urb **urb; @@ -1849,7 +1873,7 @@ static void complicated_callback(struct urb *urb) goto done; default: dev_err(&ctx->dev->intf->dev, - "iso resubmit err %d\n", + "resubmit err %d\n", status); /* FALLTHROUGH */ case -ENODEV: /* disconnected */ @@ -1863,7 +1887,7 @@ static void complicated_callback(struct urb *urb) if (ctx->pending == 0) { if (ctx->errors) dev_err(&ctx->dev->intf->dev, - "iso test, %lu errors out of %lu\n", + "during the test, %lu errors out of %lu\n", ctx->errors, ctx->packet_count); complete(&ctx->done); } @@ -1930,7 +1954,7 @@ static struct urb *iso_alloc_urb( } static int -test_queue(struct usbtest_dev *dev, struct usbtest_param *param, +test_queue(struct usbtest_dev *dev, struct usbtest_param_32 *param, int pipe, struct usb_endpoint_descriptor *desc, unsigned offset) { struct transfer_context context; @@ -2049,81 +2073,20 @@ static int test_unaligned_bulk( return retval; } -/*-------------------------------------------------------------------------*/ - -/* We only have this one interface to user space, through usbfs. - * User mode code can scan usbfs to find N different devices (maybe on - * different busses) to use when testing, and allocate one thread per - * test. So discovery is simplified, and we have no device naming issues. - * - * Don't use these only as stress/load tests. Use them along with with - * other USB bus activity: plugging, unplugging, mousing, mp3 playback, - * video capture, and so on. Run different tests at different times, in - * different sequences. Nothing here should interact with other devices, - * except indirectly by consuming USB bandwidth and CPU resources for test - * threads and request completion. But the only way to know that for sure - * is to test when HC queues are in use by many devices. - * - * WARNING: Because usbfs grabs udev->dev.sem before calling this ioctl(), - * it locks out usbcore in certain code paths. Notably, if you disconnect - * the device-under-test, hub_wq will wait block forever waiting for the - * ioctl to complete ... so that usb_disconnect() can abort the pending - * urbs and then call usbtest_disconnect(). To abort a test, you're best - * off just killing the userspace task and waiting for it to exit. - */ - +/* Run tests. */ static int -usbtest_ioctl(struct usb_interface *intf, unsigned int code, void *buf) +usbtest_do_ioctl(struct usb_interface *intf, struct usbtest_param_32 *param) { struct usbtest_dev *dev = usb_get_intfdata(intf); struct usb_device *udev = testdev_to_usbdev(dev); - struct usbtest_param *param = buf; - int retval = -EOPNOTSUPP; struct urb *urb; struct scatterlist *sg; struct usb_sg_request req; - struct timeval start; unsigned i; - - /* FIXME USBDEVFS_CONNECTINFO doesn't say how fast the device is. */ - - pattern = mod_pattern; - - if (code != USBTEST_REQUEST) - return -EOPNOTSUPP; + int retval = -EOPNOTSUPP; if (param->iterations <= 0) return -EINVAL; - - if (param->sglen > MAX_SGLEN) - return -EINVAL; - - if (mutex_lock_interruptible(&dev->lock)) - return -ERESTARTSYS; - - /* FIXME: What if a system sleep starts while a test is running? */ - - /* some devices, like ez-usb default devices, need a non-default - * altsetting to have any active endpoints. some tests change - * altsettings; force a default so most tests don't need to check. - */ - if (dev->info->alt >= 0) { - int res; - - if (intf->altsetting->desc.bInterfaceNumber) { - mutex_unlock(&dev->lock); - return -ENODEV; - } - res = set_altsetting(dev, dev->info->alt); - if (res) { - dev_err(&intf->dev, - "set altsetting to %d failed, %d\n", - dev->info->alt, res); - mutex_unlock(&dev->lock); - return res; - } - } - /* * Just a bunch of test cases that every HCD is expected to handle. * @@ -2133,7 +2096,6 @@ usbtest_ioctl(struct usb_interface *intf, unsigned int code, void *buf) * FIXME add more tests! cancel requests, verify the data, control * queueing, concurrent read+write threads, and so on. */ - do_gettimeofday(&start); switch (param->test_num) { case 0: @@ -2548,13 +2510,116 @@ usbtest_ioctl(struct usb_interface *intf, unsigned int code, void *buf) dev->in_pipe, NULL, 0); break; } - do_gettimeofday(¶m->duration); - param->duration.tv_sec -= start.tv_sec; - param->duration.tv_usec -= start.tv_usec; - if (param->duration.tv_usec < 0) { - param->duration.tv_usec += 1000 * 1000; - param->duration.tv_sec -= 1; + return retval; +} + +/*-------------------------------------------------------------------------*/ + +/* We only have this one interface to user space, through usbfs. + * User mode code can scan usbfs to find N different devices (maybe on + * different busses) to use when testing, and allocate one thread per + * test. So discovery is simplified, and we have no device naming issues. + * + * Don't use these only as stress/load tests. Use them along with with + * other USB bus activity: plugging, unplugging, mousing, mp3 playback, + * video capture, and so on. Run different tests at different times, in + * different sequences. Nothing here should interact with other devices, + * except indirectly by consuming USB bandwidth and CPU resources for test + * threads and request completion. But the only way to know that for sure + * is to test when HC queues are in use by many devices. + * + * WARNING: Because usbfs grabs udev->dev.sem before calling this ioctl(), + * it locks out usbcore in certain code paths. Notably, if you disconnect + * the device-under-test, hub_wq will wait block forever waiting for the + * ioctl to complete ... so that usb_disconnect() can abort the pending + * urbs and then call usbtest_disconnect(). To abort a test, you're best + * off just killing the userspace task and waiting for it to exit. + */ + +static int +usbtest_ioctl(struct usb_interface *intf, unsigned int code, void *buf) +{ + + struct usbtest_dev *dev = usb_get_intfdata(intf); + struct usbtest_param_64 *param_64 = buf; + struct usbtest_param_32 temp; + struct usbtest_param_32 *param_32 = buf; + struct timespec64 start; + struct timespec64 end; + struct timespec64 duration; + int retval = -EOPNOTSUPP; + + /* FIXME USBDEVFS_CONNECTINFO doesn't say how fast the device is. */ + + pattern = mod_pattern; + + if (mutex_lock_interruptible(&dev->lock)) + return -ERESTARTSYS; + + /* FIXME: What if a system sleep starts while a test is running? */ + + /* some devices, like ez-usb default devices, need a non-default + * altsetting to have any active endpoints. some tests change + * altsettings; force a default so most tests don't need to check. + */ + if (dev->info->alt >= 0) { + if (intf->altsetting->desc.bInterfaceNumber) { + retval = -ENODEV; + goto free_mutex; + } + retval = set_altsetting(dev, dev->info->alt); + if (retval) { + dev_err(&intf->dev, + "set altsetting to %d failed, %d\n", + dev->info->alt, retval); + goto free_mutex; + } + } + + switch (code) { + case USBTEST_REQUEST_64: + temp.test_num = param_64->test_num; + temp.iterations = param_64->iterations; + temp.length = param_64->length; + temp.sglen = param_64->sglen; + temp.vary = param_64->vary; + param_32 = &temp; + break; + + case USBTEST_REQUEST_32: + break; + + default: + retval = -EOPNOTSUPP; + goto free_mutex; + } + + ktime_get_ts64(&start); + + retval = usbtest_do_ioctl(intf, param_32); + if (retval) + goto free_mutex; + + ktime_get_ts64(&end); + + duration = timespec64_sub(end, start); + + temp.duration_sec = duration.tv_sec; + temp.duration_usec = duration.tv_nsec/NSEC_PER_USEC; + + switch (code) { + case USBTEST_REQUEST_32: + param_32->duration_sec = temp.duration_sec; + param_32->duration_usec = temp.duration_usec; + break; + + case USBTEST_REQUEST_64: + param_64->duration_sec = temp.duration_sec; + param_64->duration_usec = temp.duration_usec; + break; } + +free_mutex: mutex_unlock(&dev->lock); return retval; } |