diff options
Diffstat (limited to 'drivers/usb/musb/musbhsdma.c')
| -rw-r--r-- | drivers/usb/musb/musbhsdma.c | 409 |
1 files changed, 409 insertions, 0 deletions
diff --git a/drivers/usb/musb/musbhsdma.c b/drivers/usb/musb/musbhsdma.c new file mode 100644 index 000000000..ab7ec09a8 --- /dev/null +++ b/drivers/usb/musb/musbhsdma.c @@ -0,0 +1,409 @@ +/* + * MUSB OTG driver - support for Mentor's DMA controller + * + * Copyright 2005 Mentor Graphics Corporation + * Copyright (C) 2005-2007 by Texas Instruments + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + * + * THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHORS BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + */ +#include <linux/device.h> +#include <linux/interrupt.h> +#include <linux/platform_device.h> +#include <linux/slab.h> +#include "musb_core.h" +#include "musbhsdma.h" + +static void dma_channel_release(struct dma_channel *channel); + +static void dma_controller_stop(struct musb_dma_controller *controller) +{ + struct musb *musb = controller->private_data; + struct dma_channel *channel; + u8 bit; + + if (controller->used_channels != 0) { + dev_err(musb->controller, + "Stopping DMA controller while channel active\n"); + + for (bit = 0; bit < MUSB_HSDMA_CHANNELS; bit++) { + if (controller->used_channels & (1 << bit)) { + channel = &controller->channel[bit].channel; + dma_channel_release(channel); + + if (!controller->used_channels) + break; + } + } + } +} + +static struct dma_channel *dma_channel_allocate(struct dma_controller *c, + struct musb_hw_ep *hw_ep, u8 transmit) +{ + struct musb_dma_controller *controller = container_of(c, + struct musb_dma_controller, controller); + struct musb_dma_channel *musb_channel = NULL; + struct dma_channel *channel = NULL; + u8 bit; + + for (bit = 0; bit < MUSB_HSDMA_CHANNELS; bit++) { + if (!(controller->used_channels & (1 << bit))) { + controller->used_channels |= (1 << bit); + musb_channel = &(controller->channel[bit]); + musb_channel->controller = controller; + musb_channel->idx = bit; + musb_channel->epnum = hw_ep->epnum; + musb_channel->transmit = transmit; + channel = &(musb_channel->channel); + channel->private_data = musb_channel; + channel->status = MUSB_DMA_STATUS_FREE; + channel->max_len = 0x100000; + /* Tx => mode 1; Rx => mode 0 */ + channel->desired_mode = transmit; + channel->actual_len = 0; + break; + } + } + + return channel; +} + +static void dma_channel_release(struct dma_channel *channel) +{ + struct musb_dma_channel *musb_channel = channel->private_data; + + channel->actual_len = 0; + musb_channel->start_addr = 0; + musb_channel->len = 0; + + musb_channel->controller->used_channels &= + ~(1 << musb_channel->idx); + + channel->status = MUSB_DMA_STATUS_UNKNOWN; +} + +static void configure_channel(struct dma_channel *channel, + u16 packet_sz, u8 mode, + dma_addr_t dma_addr, u32 len) +{ + struct musb_dma_channel *musb_channel = channel->private_data; + struct musb_dma_controller *controller = musb_channel->controller; + struct musb *musb = controller->private_data; + void __iomem *mbase = controller->base; + u8 bchannel = musb_channel->idx; + u16 csr = 0; + + dev_dbg(musb->controller, "%p, pkt_sz %d, addr 0x%x, len %d, mode %d\n", + channel, packet_sz, dma_addr, len, mode); + + if (mode) { + csr |= 1 << MUSB_HSDMA_MODE1_SHIFT; + BUG_ON(len < packet_sz); + } + csr |= MUSB_HSDMA_BURSTMODE_INCR16 + << MUSB_HSDMA_BURSTMODE_SHIFT; + + csr |= (musb_channel->epnum << MUSB_HSDMA_ENDPOINT_SHIFT) + | (1 << MUSB_HSDMA_ENABLE_SHIFT) + | (1 << MUSB_HSDMA_IRQENABLE_SHIFT) + | (musb_channel->transmit + ? (1 << MUSB_HSDMA_TRANSMIT_SHIFT) + : 0); + + /* address/count */ + musb_write_hsdma_addr(mbase, bchannel, dma_addr); + musb_write_hsdma_count(mbase, bchannel, len); + + /* control (this should start things) */ + musb_writew(mbase, + MUSB_HSDMA_CHANNEL_OFFSET(bchannel, MUSB_HSDMA_CONTROL), + csr); +} + +static int dma_channel_program(struct dma_channel *channel, + u16 packet_sz, u8 mode, + dma_addr_t dma_addr, u32 len) +{ + struct musb_dma_channel *musb_channel = channel->private_data; + struct musb_dma_controller *controller = musb_channel->controller; + struct musb *musb = controller->private_data; + + dev_dbg(musb->controller, "ep%d-%s pkt_sz %d, dma_addr 0x%x length %d, mode %d\n", + musb_channel->epnum, + musb_channel->transmit ? "Tx" : "Rx", + packet_sz, dma_addr, len, mode); + + BUG_ON(channel->status == MUSB_DMA_STATUS_UNKNOWN || + channel->status == MUSB_DMA_STATUS_BUSY); + + /* Let targets check/tweak the arguments */ + if (musb->ops->adjust_channel_params) { + int ret = musb->ops->adjust_channel_params(channel, + packet_sz, &mode, &dma_addr, &len); + if (ret) + return ret; + } + + /* + * The DMA engine in RTL1.8 and above cannot handle + * DMA addresses that are not aligned to a 4 byte boundary. + * It ends up masking the last two bits of the address + * programmed in DMA_ADDR. + * + * Fail such DMA transfers, so that the backup PIO mode + * can carry out the transfer + */ + if ((musb->hwvers >= MUSB_HWVERS_1800) && (dma_addr % 4)) + return false; + + channel->actual_len = 0; + musb_channel->start_addr = dma_addr; + musb_channel->len = len; + musb_channel->max_packet_sz = packet_sz; + channel->status = MUSB_DMA_STATUS_BUSY; + + configure_channel(channel, packet_sz, mode, dma_addr, len); + + return true; +} + +static int dma_channel_abort(struct dma_channel *channel) +{ + struct musb_dma_channel *musb_channel = channel->private_data; + void __iomem *mbase = musb_channel->controller->base; + struct musb *musb = musb_channel->controller->private_data; + + u8 bchannel = musb_channel->idx; + int offset; + u16 csr; + + if (channel->status == MUSB_DMA_STATUS_BUSY) { + if (musb_channel->transmit) { + offset = musb->io.ep_offset(musb_channel->epnum, + MUSB_TXCSR); + + /* + * The programming guide says that we must clear + * the DMAENAB bit before the DMAMODE bit... + */ + csr = musb_readw(mbase, offset); + csr &= ~(MUSB_TXCSR_AUTOSET | MUSB_TXCSR_DMAENAB); + musb_writew(mbase, offset, csr); + csr &= ~MUSB_TXCSR_DMAMODE; + musb_writew(mbase, offset, csr); + } else { + offset = musb->io.ep_offset(musb_channel->epnum, + MUSB_RXCSR); + + csr = musb_readw(mbase, offset); + csr &= ~(MUSB_RXCSR_AUTOCLEAR | + MUSB_RXCSR_DMAENAB | + MUSB_RXCSR_DMAMODE); + musb_writew(mbase, offset, csr); + } + + musb_writew(mbase, + MUSB_HSDMA_CHANNEL_OFFSET(bchannel, MUSB_HSDMA_CONTROL), + 0); + musb_write_hsdma_addr(mbase, bchannel, 0); + musb_write_hsdma_count(mbase, bchannel, 0); + channel->status = MUSB_DMA_STATUS_FREE; + } + + return 0; +} + +static irqreturn_t dma_controller_irq(int irq, void *private_data) +{ + struct musb_dma_controller *controller = private_data; + struct musb *musb = controller->private_data; + struct musb_dma_channel *musb_channel; + struct dma_channel *channel; + + void __iomem *mbase = controller->base; + + irqreturn_t retval = IRQ_NONE; + + unsigned long flags; + + u8 bchannel; + u8 int_hsdma; + + u32 addr, count; + u16 csr; + + spin_lock_irqsave(&musb->lock, flags); + + int_hsdma = musb_readb(mbase, MUSB_HSDMA_INTR); + +#ifdef CONFIG_BLACKFIN + /* Clear DMA interrupt flags */ + musb_writeb(mbase, MUSB_HSDMA_INTR, int_hsdma); +#endif + + if (!int_hsdma) { + dev_dbg(musb->controller, "spurious DMA irq\n"); + + for (bchannel = 0; bchannel < MUSB_HSDMA_CHANNELS; bchannel++) { + musb_channel = (struct musb_dma_channel *) + &(controller->channel[bchannel]); + channel = &musb_channel->channel; + if (channel->status == MUSB_DMA_STATUS_BUSY) { + count = musb_read_hsdma_count(mbase, bchannel); + + if (count == 0) + int_hsdma |= (1 << bchannel); + } + } + + dev_dbg(musb->controller, "int_hsdma = 0x%x\n", int_hsdma); + + if (!int_hsdma) + goto done; + } + + for (bchannel = 0; bchannel < MUSB_HSDMA_CHANNELS; bchannel++) { + if (int_hsdma & (1 << bchannel)) { + musb_channel = (struct musb_dma_channel *) + &(controller->channel[bchannel]); + channel = &musb_channel->channel; + + csr = musb_readw(mbase, + MUSB_HSDMA_CHANNEL_OFFSET(bchannel, + MUSB_HSDMA_CONTROL)); + + if (csr & (1 << MUSB_HSDMA_BUSERROR_SHIFT)) { + musb_channel->channel.status = + MUSB_DMA_STATUS_BUS_ABORT; + } else { + u8 devctl; + + addr = musb_read_hsdma_addr(mbase, + bchannel); + channel->actual_len = addr + - musb_channel->start_addr; + + dev_dbg(musb->controller, "ch %p, 0x%x -> 0x%x (%zu / %d) %s\n", + channel, musb_channel->start_addr, + addr, channel->actual_len, + musb_channel->len, + (channel->actual_len + < musb_channel->len) ? + "=> reconfig 0" : "=> complete"); + + devctl = musb_readb(mbase, MUSB_DEVCTL); + + channel->status = MUSB_DMA_STATUS_FREE; + + /* completed */ + if ((devctl & MUSB_DEVCTL_HM) + && (musb_channel->transmit) + && ((channel->desired_mode == 0) + || (channel->actual_len & + (musb_channel->max_packet_sz - 1))) + ) { + u8 epnum = musb_channel->epnum; + int offset = musb->io.ep_offset(epnum, + MUSB_TXCSR); + u16 txcsr; + + /* + * The programming guide says that we + * must clear DMAENAB before DMAMODE. + */ + musb_ep_select(mbase, epnum); + txcsr = musb_readw(mbase, offset); + txcsr &= ~(MUSB_TXCSR_DMAENAB + | MUSB_TXCSR_AUTOSET); + musb_writew(mbase, offset, txcsr); + /* Send out the packet */ + txcsr &= ~MUSB_TXCSR_DMAMODE; + txcsr |= MUSB_TXCSR_TXPKTRDY; + musb_writew(mbase, offset, txcsr); + } + musb_dma_completion(musb, musb_channel->epnum, + musb_channel->transmit); + } + } + } + + retval = IRQ_HANDLED; +done: + spin_unlock_irqrestore(&musb->lock, flags); + return retval; +} + +void dma_controller_destroy(struct dma_controller *c) +{ + struct musb_dma_controller *controller = container_of(c, + struct musb_dma_controller, controller); + + dma_controller_stop(controller); + + if (controller->irq) + free_irq(controller->irq, c); + + kfree(controller); +} + +struct dma_controller *dma_controller_create(struct musb *musb, void __iomem *base) +{ + struct musb_dma_controller *controller; + struct device *dev = musb->controller; + struct platform_device *pdev = to_platform_device(dev); + int irq = platform_get_irq_byname(pdev, "dma"); + + if (irq <= 0) { + dev_err(dev, "No DMA interrupt line!\n"); + return NULL; + } + + controller = kzalloc(sizeof(*controller), GFP_KERNEL); + if (!controller) + return NULL; + + controller->channel_count = MUSB_HSDMA_CHANNELS; + controller->private_data = musb; + controller->base = base; + + controller->controller.channel_alloc = dma_channel_allocate; + controller->controller.channel_release = dma_channel_release; + controller->controller.channel_program = dma_channel_program; + controller->controller.channel_abort = dma_channel_abort; + + if (request_irq(irq, dma_controller_irq, 0, + dev_name(musb->controller), &controller->controller)) { + dev_err(dev, "request_irq %d failed!\n", irq); + dma_controller_destroy(&controller->controller); + + return NULL; + } + + controller->irq = irq; + + return &controller->controller; +} |