summaryrefslogtreecommitdiff
path: root/drivers/usb/musb/omap2430.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/usb/musb/omap2430.c')
-rw-r--r--drivers/usb/musb/omap2430.c257
1 files changed, 89 insertions, 168 deletions
diff --git a/drivers/usb/musb/omap2430.c b/drivers/usb/musb/omap2430.c
index c84e0322c..0b4cec940 100644
--- a/drivers/usb/musb/omap2430.c
+++ b/drivers/usb/musb/omap2430.c
@@ -49,97 +49,14 @@ struct omap2430_glue {
enum musb_vbus_id_status status;
struct work_struct omap_musb_mailbox_work;
struct device *control_otghs;
+ bool cable_connected;
+ bool enabled;
+ bool powered;
};
#define glue_to_musb(g) platform_get_drvdata(g->musb)
static struct omap2430_glue *_glue;
-static struct timer_list musb_idle_timer;
-
-static void musb_do_idle(unsigned long _musb)
-{
- struct musb *musb = (void *)_musb;
- unsigned long flags;
- u8 power;
- u8 devctl;
-
- spin_lock_irqsave(&musb->lock, flags);
-
- switch (musb->xceiv->otg->state) {
- case OTG_STATE_A_WAIT_BCON:
-
- devctl = musb_readb(musb->mregs, MUSB_DEVCTL);
- if (devctl & MUSB_DEVCTL_BDEVICE) {
- musb->xceiv->otg->state = OTG_STATE_B_IDLE;
- MUSB_DEV_MODE(musb);
- } else {
- musb->xceiv->otg->state = OTG_STATE_A_IDLE;
- MUSB_HST_MODE(musb);
- }
- break;
- case OTG_STATE_A_SUSPEND:
- /* finish RESUME signaling? */
- if (musb->port1_status & MUSB_PORT_STAT_RESUME) {
- power = musb_readb(musb->mregs, MUSB_POWER);
- power &= ~MUSB_POWER_RESUME;
- dev_dbg(musb->controller, "root port resume stopped, power %02x\n", power);
- musb_writeb(musb->mregs, MUSB_POWER, power);
- musb->is_active = 1;
- musb->port1_status &= ~(USB_PORT_STAT_SUSPEND
- | MUSB_PORT_STAT_RESUME);
- musb->port1_status |= USB_PORT_STAT_C_SUSPEND << 16;
- usb_hcd_poll_rh_status(musb->hcd);
- /* NOTE: it might really be A_WAIT_BCON ... */
- musb->xceiv->otg->state = OTG_STATE_A_HOST;
- }
- break;
- case OTG_STATE_A_HOST:
- devctl = musb_readb(musb->mregs, MUSB_DEVCTL);
- if (devctl & MUSB_DEVCTL_BDEVICE)
- musb->xceiv->otg->state = OTG_STATE_B_IDLE;
- else
- musb->xceiv->otg->state = OTG_STATE_A_WAIT_BCON;
- default:
- break;
- }
- spin_unlock_irqrestore(&musb->lock, flags);
-}
-
-
-static void omap2430_musb_try_idle(struct musb *musb, unsigned long timeout)
-{
- unsigned long default_timeout = jiffies + msecs_to_jiffies(3);
- static unsigned long last_timer;
-
- if (timeout == 0)
- timeout = default_timeout;
-
- /* Never idle if active, or when VBUS timeout is not set as host */
- if (musb->is_active || ((musb->a_wait_bcon == 0)
- && (musb->xceiv->otg->state == OTG_STATE_A_WAIT_BCON))) {
- dev_dbg(musb->controller, "%s active, deleting timer\n",
- usb_otg_state_string(musb->xceiv->otg->state));
- del_timer(&musb_idle_timer);
- last_timer = jiffies;
- return;
- }
-
- if (time_after(last_timer, timeout)) {
- if (!timer_pending(&musb_idle_timer))
- last_timer = timeout;
- else {
- dev_dbg(musb->controller, "Longer idle timer already pending, ignoring\n");
- return;
- }
- }
- last_timer = timeout;
-
- dev_dbg(musb->controller, "%s inactive, for idle timer for %lu ms\n",
- usb_otg_state_string(musb->xceiv->otg->state),
- (unsigned long)jiffies_to_msecs(timeout - jiffies));
- mod_timer(&musb_idle_timer, timeout);
-}
-
static void omap2430_musb_set_vbus(struct musb *musb, int is_on)
{
struct usb_otg *otg = musb->xceiv->otg;
@@ -205,16 +122,6 @@ static void omap2430_musb_set_vbus(struct musb *musb, int is_on)
musb_readb(musb->mregs, MUSB_DEVCTL));
}
-static int omap2430_musb_set_mode(struct musb *musb, u8 musb_mode)
-{
- u8 devctl = musb_readb(musb->mregs, MUSB_DEVCTL);
-
- devctl |= MUSB_DEVCTL_SESSION;
- musb_writeb(musb->mregs, MUSB_DEVCTL, devctl);
-
- return 0;
-}
-
static inline void omap2430_low_level_exit(struct musb *musb)
{
u32 l;
@@ -234,22 +141,63 @@ static inline void omap2430_low_level_init(struct musb *musb)
musb_writel(musb->mregs, OTG_FORCESTDBY, l);
}
-static void omap2430_musb_mailbox(enum musb_vbus_id_status status)
+/*
+ * We can get multiple cable events so we need to keep track
+ * of the power state. Only keep power enabled if USB cable is
+ * connected and a gadget is started.
+ */
+static void omap2430_set_power(struct musb *musb, bool enabled, bool cable)
+{
+ struct device *dev = musb->controller;
+ struct omap2430_glue *glue = dev_get_drvdata(dev->parent);
+ bool power_up;
+ int res;
+
+ if (glue->enabled != enabled)
+ glue->enabled = enabled;
+
+ if (glue->cable_connected != cable)
+ glue->cable_connected = cable;
+
+ power_up = glue->enabled && glue->cable_connected;
+ if (power_up == glue->powered) {
+ dev_warn(musb->controller, "power state already %i\n",
+ power_up);
+ return;
+ }
+
+ glue->powered = power_up;
+
+ if (power_up) {
+ res = pm_runtime_get_sync(musb->controller);
+ if (res < 0) {
+ dev_err(musb->controller, "could not enable: %i", res);
+ glue->powered = false;
+ }
+ } else {
+ pm_runtime_mark_last_busy(musb->controller);
+ pm_runtime_put_autosuspend(musb->controller);
+ }
+}
+
+static int omap2430_musb_mailbox(enum musb_vbus_id_status status)
{
struct omap2430_glue *glue = _glue;
if (!glue) {
pr_err("%s: musb core is not yet initialized\n", __func__);
- return;
+ return -EPROBE_DEFER;
}
glue->status = status;
if (!glue_to_musb(glue)) {
pr_err("%s: musb core is not yet ready\n", __func__);
- return;
+ return -EPROBE_DEFER;
}
schedule_work(&glue->omap_musb_mailbox_work);
+
+ return 0;
}
static void omap_musb_set_mailbox(struct omap2430_glue *glue)
@@ -259,6 +207,13 @@ static void omap_musb_set_mailbox(struct omap2430_glue *glue)
struct musb_hdrc_platform_data *pdata = dev_get_platdata(dev);
struct omap_musb_board_data *data = pdata->board_data;
struct usb_otg *otg = musb->xceiv->otg;
+ bool cable_connected;
+
+ cable_connected = ((glue->status == MUSB_ID_GROUND) ||
+ (glue->status == MUSB_VBUS_VALID));
+
+ if (cable_connected)
+ omap2430_set_power(musb, glue->enabled, cable_connected);
switch (glue->status) {
case MUSB_ID_GROUND:
@@ -268,7 +223,6 @@ static void omap_musb_set_mailbox(struct omap2430_glue *glue)
musb->xceiv->otg->state = OTG_STATE_A_IDLE;
musb->xceiv->last_event = USB_EVENT_ID;
if (musb->gadget_driver) {
- pm_runtime_get_sync(dev);
omap_control_usb_set_mode(glue->control_otghs,
USB_MODE_HOST);
omap2430_musb_set_vbus(musb, 1);
@@ -281,8 +235,6 @@ static void omap_musb_set_mailbox(struct omap2430_glue *glue)
otg->default_a = false;
musb->xceiv->otg->state = OTG_STATE_B_IDLE;
musb->xceiv->last_event = USB_EVENT_VBUS;
- if (musb->gadget_driver)
- pm_runtime_get_sync(dev);
omap_control_usb_set_mode(glue->control_otghs, USB_MODE_DEVICE);
break;
@@ -291,11 +243,8 @@ static void omap_musb_set_mailbox(struct omap2430_glue *glue)
dev_dbg(dev, "VBUS Disconnect\n");
musb->xceiv->last_event = USB_EVENT_NONE;
- if (musb->gadget_driver) {
+ if (musb->gadget_driver)
omap2430_musb_set_vbus(musb, 0);
- pm_runtime_mark_last_busy(dev);
- pm_runtime_put_autosuspend(dev);
- }
if (data->interface_type == MUSB_INTERFACE_UTMI)
otg_set_vbus(musb->xceiv->otg, 0);
@@ -307,6 +256,9 @@ static void omap_musb_set_mailbox(struct omap2430_glue *glue)
dev_dbg(dev, "ID float\n");
}
+ if (!cable_connected)
+ omap2430_set_power(musb, glue->enabled, cable_connected);
+
atomic_notifier_call_chain(&musb->xceiv->notifier,
musb->xceiv->last_event, NULL);
}
@@ -316,13 +268,8 @@ static void omap_musb_mailbox_work(struct work_struct *mailbox_work)
{
struct omap2430_glue *glue = container_of(mailbox_work,
struct omap2430_glue, omap_musb_mailbox_work);
- struct musb *musb = glue_to_musb(glue);
- struct device *dev = musb->controller;
- pm_runtime_get_sync(dev);
omap_musb_set_mailbox(glue);
- pm_runtime_mark_last_busy(dev);
- pm_runtime_put_autosuspend(dev);
}
static irqreturn_t omap2430_musb_interrupt(int irq, void *__hci)
@@ -389,23 +336,7 @@ static int omap2430_musb_init(struct musb *musb)
return PTR_ERR(musb->phy);
}
musb->isr = omap2430_musb_interrupt;
-
- /*
- * Enable runtime PM for musb parent (this driver). We can't
- * do it earlier as struct musb is not yet allocated and we
- * need to touch the musb registers for runtime PM.
- */
- pm_runtime_enable(glue->dev);
- status = pm_runtime_get_sync(glue->dev);
- if (status < 0)
- goto err1;
-
- status = pm_runtime_get_sync(dev);
- if (status < 0) {
- dev_err(dev, "pm_runtime_get_sync FAILED %d\n", status);
- pm_runtime_put_sync(glue->dev);
- goto err1;
- }
+ phy_init(musb->phy);
l = musb_readl(musb->mregs, OTG_INTERFSEL);
@@ -427,20 +358,10 @@ static int omap2430_musb_init(struct musb *musb)
musb_readl(musb->mregs, OTG_INTERFSEL),
musb_readl(musb->mregs, OTG_SIMENABLE));
- setup_timer(&musb_idle_timer, musb_do_idle, (unsigned long) musb);
-
if (glue->status != MUSB_UNKNOWN)
omap_musb_set_mailbox(glue);
- phy_init(musb->phy);
- phy_power_on(musb->phy);
-
- pm_runtime_put_noidle(musb->controller);
- pm_runtime_put_noidle(glue->dev);
return 0;
-
-err1:
- return status;
}
static void omap2430_musb_enable(struct musb *musb)
@@ -452,6 +373,11 @@ static void omap2430_musb_enable(struct musb *musb)
struct musb_hdrc_platform_data *pdata = dev_get_platdata(dev);
struct omap_musb_board_data *data = pdata->board_data;
+ if (!WARN_ON(!musb->phy))
+ phy_power_on(musb->phy);
+
+ omap2430_set_power(musb, true, glue->cable_connected);
+
switch (glue->status) {
case MUSB_ID_GROUND:
@@ -487,18 +413,25 @@ static void omap2430_musb_disable(struct musb *musb)
struct device *dev = musb->controller;
struct omap2430_glue *glue = dev_get_drvdata(dev->parent);
+ if (!WARN_ON(!musb->phy))
+ phy_power_off(musb->phy);
+
if (glue->status != MUSB_UNKNOWN)
omap_control_usb_set_mode(glue->control_otghs,
USB_MODE_DISCONNECT);
+
+ omap2430_set_power(musb, false, glue->cable_connected);
}
static int omap2430_musb_exit(struct musb *musb)
{
- del_timer_sync(&musb_idle_timer);
+ struct device *dev = musb->controller;
+ struct omap2430_glue *glue = dev_get_drvdata(dev->parent);
omap2430_low_level_exit(musb);
- phy_power_off(musb->phy);
phy_exit(musb->phy);
+ musb->phy = NULL;
+ cancel_work_sync(&glue->omap_musb_mailbox_work);
return 0;
}
@@ -512,9 +445,6 @@ static const struct musb_platform_ops omap2430_ops = {
.init = omap2430_musb_init,
.exit = omap2430_musb_exit,
- .set_mode = omap2430_musb_set_mode,
- .try_idle = omap2430_musb_try_idle,
-
.set_vbus = omap2430_musb_set_vbus,
.enable = omap2430_musb_enable,
@@ -639,11 +569,9 @@ static int omap2430_probe(struct platform_device *pdev)
goto err2;
}
- /*
- * Note that we cannot enable PM runtime yet for this
- * driver as we need struct musb initialized first.
- * See omap2430_musb_init above.
- */
+ pm_runtime_enable(glue->dev);
+ pm_runtime_use_autosuspend(glue->dev);
+ pm_runtime_set_autosuspend_delay(glue->dev, 500);
ret = platform_device_add(musb);
if (ret) {
@@ -662,12 +590,14 @@ err0:
static int omap2430_remove(struct platform_device *pdev)
{
- struct omap2430_glue *glue = platform_get_drvdata(pdev);
+ struct omap2430_glue *glue = platform_get_drvdata(pdev);
+ struct musb *musb = glue_to_musb(glue);
pm_runtime_get_sync(glue->dev);
- cancel_work_sync(&glue->omap_musb_mailbox_work);
platform_device_unregister(glue->musb);
+ omap2430_set_power(musb, false, false);
pm_runtime_put_sync(glue->dev);
+ pm_runtime_dont_use_autosuspend(glue->dev);
pm_runtime_disable(glue->dev);
return 0;
@@ -680,12 +610,13 @@ static int omap2430_runtime_suspend(struct device *dev)
struct omap2430_glue *glue = dev_get_drvdata(dev);
struct musb *musb = glue_to_musb(glue);
- if (musb) {
- musb->context.otg_interfsel = musb_readl(musb->mregs,
- OTG_INTERFSEL);
+ if (!musb)
+ return 0;
- omap2430_low_level_exit(musb);
- }
+ musb->context.otg_interfsel = musb_readl(musb->mregs,
+ OTG_INTERFSEL);
+
+ omap2430_low_level_exit(musb);
return 0;
}
@@ -696,7 +627,7 @@ static int omap2430_runtime_resume(struct device *dev)
struct musb *musb = glue_to_musb(glue);
if (!musb)
- return -EPROBE_DEFER;
+ return 0;
omap2430_low_level_init(musb);
musb_writel(musb->mregs, OTG_INTERFSEL,
@@ -738,18 +669,8 @@ static struct platform_driver omap2430_driver = {
},
};
+module_platform_driver(omap2430_driver);
+
MODULE_DESCRIPTION("OMAP2PLUS MUSB Glue Layer");
MODULE_AUTHOR("Felipe Balbi <balbi@ti.com>");
MODULE_LICENSE("GPL v2");
-
-static int __init omap2430_init(void)
-{
- return platform_driver_register(&omap2430_driver);
-}
-subsys_initcall(omap2430_init);
-
-static void __exit omap2430_exit(void)
-{
- platform_driver_unregister(&omap2430_driver);
-}
-module_exit(omap2430_exit);