summaryrefslogtreecommitdiff
path: root/drivers/usb/musb
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/usb/musb')
-rw-r--r--drivers/usb/musb/Kconfig2
-rw-r--r--drivers/usb/musb/musb_core.c39
-rw-r--r--drivers/usb/musb/musb_core.h2
-rw-r--r--drivers/usb/musb/musb_dsps.c15
-rw-r--r--drivers/usb/musb/musb_host.c22
-rw-r--r--drivers/usb/musb/sunxi.c14
6 files changed, 73 insertions, 21 deletions
diff --git a/drivers/usb/musb/Kconfig b/drivers/usb/musb/Kconfig
index 1f2037bbe..45c83baf6 100644
--- a/drivers/usb/musb/Kconfig
+++ b/drivers/usb/musb/Kconfig
@@ -159,7 +159,7 @@ config USB_TI_CPPI_DMA
config USB_TI_CPPI41_DMA
bool 'TI CPPI 4.1 (AM335x)'
- depends on ARCH_OMAP
+ depends on ARCH_OMAP && DMADEVICES
select TI_CPPI41
config USB_TUSB_OMAP_DMA
diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c
index 2c624a107..ee9ff7028 100644
--- a/drivers/usb/musb/musb_core.c
+++ b/drivers/usb/musb/musb_core.c
@@ -1028,18 +1028,22 @@ void musb_start(struct musb *musb)
{
void __iomem *regs = musb->mregs;
u8 devctl = musb_readb(regs, MUSB_DEVCTL);
+ u8 power;
dev_dbg(musb->controller, "<== devctl %02x\n", devctl);
musb_enable_interrupts(musb);
musb_writeb(regs, MUSB_TESTMODE, 0);
- /* put into basic highspeed mode and start session */
- musb_writeb(regs, MUSB_POWER, MUSB_POWER_ISOUPDATE
- | MUSB_POWER_HSENAB
- /* ENSUSPEND wedges tusb */
- /* | MUSB_POWER_ENSUSPEND */
- );
+ power = MUSB_POWER_ISOUPDATE;
+ /*
+ * treating UNKNOWN as unspecified maximum speed, in which case
+ * we will default to high-speed.
+ */
+ if (musb->config->maximum_speed == USB_SPEED_HIGH ||
+ musb->config->maximum_speed == USB_SPEED_UNKNOWN)
+ power |= MUSB_POWER_HSENAB;
+ musb_writeb(regs, MUSB_POWER, power);
musb->is_active = 0;
devctl = musb_readb(regs, MUSB_DEVCTL);
@@ -1664,7 +1668,7 @@ EXPORT_SYMBOL_GPL(musb_interrupt);
static bool use_dma = 1;
/* "modprobe ... use_dma=0" etc */
-module_param(use_dma, bool, 0);
+module_param(use_dma, bool, 0644);
MODULE_PARM_DESC(use_dma, "enable/disable use of DMA");
void musb_dma_completion(struct musb *musb, u8 epnum, u8 transmit)
@@ -1771,13 +1775,20 @@ musb_vbus_show(struct device *dev, struct device_attribute *attr, char *buf)
unsigned long flags;
unsigned long val;
int vbus;
+ u8 devctl;
spin_lock_irqsave(&musb->lock, flags);
val = musb->a_wait_bcon;
- /* FIXME get_vbus_status() is normally #defined as false...
- * and is effectively TUSB-specific.
- */
vbus = musb_platform_get_vbus_status(musb);
+ if (vbus < 0) {
+ /* Use default MUSB method by means of DEVCTL register */
+ devctl = musb_readb(musb->mregs, MUSB_DEVCTL);
+ if ((devctl & MUSB_DEVCTL_VBUS)
+ == (3 << MUSB_DEVCTL_VBUS_SHIFT))
+ vbus = 1;
+ else
+ vbus = 0;
+ }
spin_unlock_irqrestore(&musb->lock, flags);
return sprintf(buf, "Vbus %s, timeout %lu msec\n",
@@ -2006,7 +2017,6 @@ musb_init_controller(struct device *dev, int nIrq, void __iomem *ctrl)
/* We need musb_read/write functions initialized for PM */
pm_runtime_use_autosuspend(musb->controller);
pm_runtime_set_autosuspend_delay(musb->controller, 200);
- pm_runtime_irq_safe(musb->controller);
pm_runtime_enable(musb->controller);
/* The musb_platform_init() call:
@@ -2084,6 +2094,7 @@ musb_init_controller(struct device *dev, int nIrq, void __iomem *ctrl)
#ifndef CONFIG_MUSB_PIO_ONLY
if (!musb->ops->dma_init || !musb->ops->dma_exit) {
dev_err(dev, "DMA controller not set\n");
+ status = -ENODEV;
goto fail2;
}
musb_dma_controller_create = musb->ops->dma_init;
@@ -2207,6 +2218,12 @@ musb_init_controller(struct device *dev, int nIrq, void __iomem *ctrl)
pm_runtime_put(musb->controller);
+ /*
+ * For why this is currently needed, see commit 3e43a0725637
+ * ("usb: musb: core: add pm_runtime_irq_safe()")
+ */
+ pm_runtime_irq_safe(musb->controller);
+
return 0;
fail5:
diff --git a/drivers/usb/musb/musb_core.h b/drivers/usb/musb/musb_core.h
index 4b886d0f6..2337d7a7d 100644
--- a/drivers/usb/musb/musb_core.h
+++ b/drivers/usb/musb/musb_core.h
@@ -579,7 +579,7 @@ static inline int musb_platform_recover(struct musb *musb)
static inline int musb_platform_get_vbus_status(struct musb *musb)
{
if (!musb->ops->vbus_status)
- return 0;
+ return -EINVAL;
return musb->ops->vbus_status(musb);
}
diff --git a/drivers/usb/musb/musb_dsps.c b/drivers/usb/musb/musb_dsps.c
index 84512d1d5..eeb7d9ecf 100644
--- a/drivers/usb/musb/musb_dsps.c
+++ b/drivers/usb/musb/musb_dsps.c
@@ -666,7 +666,7 @@ static int get_musb_port_mode(struct device *dev)
{
enum usb_dr_mode mode;
- mode = of_usb_get_dr_mode(dev->of_node);
+ mode = usb_get_dr_mode(dev);
switch (mode) {
case USB_DR_MODE_HOST:
return MUSB_PORT_MODE_HOST;
@@ -747,6 +747,19 @@ static int dsps_create_musb_pdev(struct dsps_glue *glue,
if (!ret && val)
config->multipoint = true;
+ config->maximum_speed = usb_get_maximum_speed(&parent->dev);
+ switch (config->maximum_speed) {
+ case USB_SPEED_LOW:
+ case USB_SPEED_FULL:
+ break;
+ case USB_SPEED_SUPER:
+ dev_warn(dev, "ignore incorrect maximum_speed "
+ "(super-speed) setting in dts");
+ /* fall through */
+ default:
+ config->maximum_speed = USB_SPEED_HIGH;
+ }
+
ret = platform_device_add_data(musb, &pdata, sizeof(pdata));
if (ret) {
dev_err(dev, "failed to add platform_data\n");
diff --git a/drivers/usb/musb/musb_host.c b/drivers/usb/musb/musb_host.c
index 26c65e66c..795a45b1b 100644
--- a/drivers/usb/musb/musb_host.c
+++ b/drivers/usb/musb/musb_host.c
@@ -112,22 +112,32 @@ static void musb_h_tx_flush_fifo(struct musb_hw_ep *ep)
struct musb *musb = ep->musb;
void __iomem *epio = ep->regs;
u16 csr;
- u16 lastcsr = 0;
int retries = 1000;
csr = musb_readw(epio, MUSB_TXCSR);
while (csr & MUSB_TXCSR_FIFONOTEMPTY) {
- if (csr != lastcsr)
- dev_dbg(musb->controller, "Host TX FIFONOTEMPTY csr: %02x\n", csr);
- lastcsr = csr;
csr |= MUSB_TXCSR_FLUSHFIFO | MUSB_TXCSR_TXPKTRDY;
musb_writew(epio, MUSB_TXCSR, csr);
csr = musb_readw(epio, MUSB_TXCSR);
- if (WARN(retries-- < 1,
+
+ /*
+ * FIXME: sometimes the tx fifo flush failed, it has been
+ * observed during device disconnect on AM335x.
+ *
+ * To reproduce the issue, ensure tx urb(s) are queued when
+ * unplug the usb device which is connected to AM335x usb
+ * host port.
+ *
+ * I found using a usb-ethernet device and running iperf
+ * (client on AM335x) has very high chance to trigger it.
+ *
+ * Better to turn on dev_dbg() in musb_cleanup_urb() with
+ * CPPI enabled to see the issue when aborting the tx channel.
+ */
+ if (dev_WARN_ONCE(musb->controller, retries-- < 1,
"Could not flush host TX%d fifo: csr: %04x\n",
ep->epnum, csr))
return;
- mdelay(1);
}
}
diff --git a/drivers/usb/musb/sunxi.c b/drivers/usb/musb/sunxi.c
index f9f6304ad..d9b0dc461 100644
--- a/drivers/usb/musb/sunxi.c
+++ b/drivers/usb/musb/sunxi.c
@@ -341,6 +341,16 @@ static void sunxi_musb_disable(struct musb *musb)
clear_bit(SUNXI_MUSB_FL_ENABLED, &glue->flags);
}
+struct dma_controller *sunxi_musb_dma_controller_create(struct musb *musb,
+ void __iomem *base)
+{
+ return NULL;
+}
+
+void sunxi_musb_dma_controller_destroy(struct dma_controller *c)
+{
+}
+
/*
* sunxi musb register layout
* 0x00 - 0x17 fifo regs, 1 long per fifo
@@ -566,6 +576,8 @@ static const struct musb_platform_ops sunxi_musb_ops = {
.writeb = sunxi_musb_writeb,
.readw = sunxi_musb_readw,
.writew = sunxi_musb_writew,
+ .dma_init = sunxi_musb_dma_controller_create,
+ .dma_exit = sunxi_musb_dma_controller_destroy,
.set_vbus = sunxi_musb_set_vbus,
.pre_root_reset_end = sunxi_musb_pre_root_reset_end,
.post_root_reset_end = sunxi_musb_post_root_reset_end,
@@ -617,7 +629,7 @@ static int sunxi_musb_probe(struct platform_device *pdev)
return -ENOMEM;
memset(&pdata, 0, sizeof(pdata));
- switch (of_usb_get_dr_mode(np)) {
+ switch (usb_get_dr_mode(&pdev->dev)) {
#if defined CONFIG_USB_MUSB_DUAL_ROLE || defined CONFIG_USB_MUSB_HOST
case USB_DR_MODE_HOST:
pdata.mode = MUSB_PORT_MODE_HOST;
generated by cgit v1.2.3-54-g00ecf (git 2.45.2) at 2024-11-08 02:04:17 +0000