summaryrefslogtreecommitdiff
path: root/drivers/usb/serial/cp210x.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/usb/serial/cp210x.c')
-rw-r--r--drivers/usb/serial/cp210x.c894
1 files changed, 894 insertions, 0 deletions
diff --git a/drivers/usb/serial/cp210x.c b/drivers/usb/serial/cp210x.c
new file mode 100644
index 000000000..eac7ccaa3
--- /dev/null
+++ b/drivers/usb/serial/cp210x.c
@@ -0,0 +1,894 @@
+/*
+ * Silicon Laboratories CP210x USB to RS232 serial adaptor driver
+ *
+ * Copyright (C) 2005 Craig Shelley (craig@microtron.org.uk)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation.
+ *
+ * Support to set flow control line levels using TIOCMGET and TIOCMSET
+ * thanks to Karl Hiramoto karl@hiramoto.org. RTSCTS hardware flow
+ * control thanks to Munir Nassar nassarmu@real-time.com
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/slab.h>
+#include <linux/tty.h>
+#include <linux/tty_flip.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/usb.h>
+#include <linux/uaccess.h>
+#include <linux/usb/serial.h>
+
+#define DRIVER_DESC "Silicon Labs CP210x RS232 serial adaptor driver"
+
+/*
+ * Function Prototypes
+ */
+static int cp210x_open(struct tty_struct *tty, struct usb_serial_port *);
+static void cp210x_close(struct usb_serial_port *);
+static void cp210x_get_termios(struct tty_struct *, struct usb_serial_port *);
+static void cp210x_get_termios_port(struct usb_serial_port *port,
+ unsigned int *cflagp, unsigned int *baudp);
+static void cp210x_change_speed(struct tty_struct *, struct usb_serial_port *,
+ struct ktermios *);
+static void cp210x_set_termios(struct tty_struct *, struct usb_serial_port *,
+ struct ktermios*);
+static int cp210x_tiocmget(struct tty_struct *);
+static int cp210x_tiocmset(struct tty_struct *, unsigned int, unsigned int);
+static int cp210x_tiocmset_port(struct usb_serial_port *port,
+ unsigned int, unsigned int);
+static void cp210x_break_ctl(struct tty_struct *, int);
+static int cp210x_startup(struct usb_serial *);
+static void cp210x_release(struct usb_serial *);
+static void cp210x_dtr_rts(struct usb_serial_port *p, int on);
+
+static const struct usb_device_id id_table[] = {
+ { USB_DEVICE(0x045B, 0x0053) }, /* Renesas RX610 RX-Stick */
+ { USB_DEVICE(0x0471, 0x066A) }, /* AKTAKOM ACE-1001 cable */
+ { USB_DEVICE(0x0489, 0xE000) }, /* Pirelli Broadband S.p.A, DP-L10 SIP/GSM Mobile */
+ { USB_DEVICE(0x0489, 0xE003) }, /* Pirelli Broadband S.p.A, DP-L10 SIP/GSM Mobile */
+ { USB_DEVICE(0x0745, 0x1000) }, /* CipherLab USB CCD Barcode Scanner 1000 */
+ { USB_DEVICE(0x0846, 0x1100) }, /* NetGear Managed Switch M4100 series, M5300 series, M7100 series */
+ { USB_DEVICE(0x08e6, 0x5501) }, /* Gemalto Prox-PU/CU contactless smartcard reader */
+ { USB_DEVICE(0x08FD, 0x000A) }, /* Digianswer A/S , ZigBee/802.15.4 MAC Device */
+ { USB_DEVICE(0x0908, 0x01FF) }, /* Siemens RUGGEDCOM USB Serial Console */
+ { USB_DEVICE(0x0BED, 0x1100) }, /* MEI (TM) Cashflow-SC Bill/Voucher Acceptor */
+ { USB_DEVICE(0x0BED, 0x1101) }, /* MEI series 2000 Combo Acceptor */
+ { USB_DEVICE(0x0FCF, 0x1003) }, /* Dynastream ANT development board */
+ { USB_DEVICE(0x0FCF, 0x1004) }, /* Dynastream ANT2USB */
+ { USB_DEVICE(0x0FCF, 0x1006) }, /* Dynastream ANT development board */
+ { USB_DEVICE(0x0FDE, 0xCA05) }, /* OWL Wireless Electricity Monitor CM-160 */
+ { USB_DEVICE(0x10A6, 0xAA26) }, /* Knock-off DCU-11 cable */
+ { USB_DEVICE(0x10AB, 0x10C5) }, /* Siemens MC60 Cable */
+ { USB_DEVICE(0x10B5, 0xAC70) }, /* Nokia CA-42 USB */
+ { USB_DEVICE(0x10C4, 0x0F91) }, /* Vstabi */
+ { USB_DEVICE(0x10C4, 0x1101) }, /* Arkham Technology DS101 Bus Monitor */
+ { USB_DEVICE(0x10C4, 0x1601) }, /* Arkham Technology DS101 Adapter */
+ { USB_DEVICE(0x10C4, 0x800A) }, /* SPORTident BSM7-D-USB main station */
+ { USB_DEVICE(0x10C4, 0x803B) }, /* Pololu USB-serial converter */
+ { USB_DEVICE(0x10C4, 0x8044) }, /* Cygnal Debug Adapter */
+ { USB_DEVICE(0x10C4, 0x804E) }, /* Software Bisque Paramount ME build-in converter */
+ { USB_DEVICE(0x10C4, 0x8053) }, /* Enfora EDG1228 */
+ { USB_DEVICE(0x10C4, 0x8054) }, /* Enfora GSM2228 */
+ { USB_DEVICE(0x10C4, 0x8066) }, /* Argussoft In-System Programmer */
+ { USB_DEVICE(0x10C4, 0x806F) }, /* IMS USB to RS422 Converter Cable */
+ { USB_DEVICE(0x10C4, 0x807A) }, /* Crumb128 board */
+ { USB_DEVICE(0x10C4, 0x80C4) }, /* Cygnal Integrated Products, Inc., Optris infrared thermometer */
+ { USB_DEVICE(0x10C4, 0x80CA) }, /* Degree Controls Inc */
+ { USB_DEVICE(0x10C4, 0x80DD) }, /* Tracient RFID */
+ { USB_DEVICE(0x10C4, 0x80F6) }, /* Suunto sports instrument */
+ { USB_DEVICE(0x10C4, 0x8115) }, /* Arygon NFC/Mifare Reader */
+ { USB_DEVICE(0x10C4, 0x813D) }, /* Burnside Telecom Deskmobile */
+ { USB_DEVICE(0x10C4, 0x813F) }, /* Tams Master Easy Control */
+ { USB_DEVICE(0x10C4, 0x814A) }, /* West Mountain Radio RIGblaster P&P */
+ { USB_DEVICE(0x10C4, 0x814B) }, /* West Mountain Radio RIGtalk */
+ { USB_DEVICE(0x2405, 0x0003) }, /* West Mountain Radio RIGblaster Advantage */
+ { USB_DEVICE(0x10C4, 0x8156) }, /* B&G H3000 link cable */
+ { USB_DEVICE(0x10C4, 0x815E) }, /* Helicomm IP-Link 1220-DVM */
+ { USB_DEVICE(0x10C4, 0x815F) }, /* Timewave HamLinkUSB */
+ { USB_DEVICE(0x10C4, 0x818B) }, /* AVIT Research USB to TTL */
+ { USB_DEVICE(0x10C4, 0x819F) }, /* MJS USB Toslink Switcher */
+ { USB_DEVICE(0x10C4, 0x81A6) }, /* ThinkOptics WavIt */
+ { USB_DEVICE(0x10C4, 0x81A9) }, /* Multiplex RC Interface */
+ { USB_DEVICE(0x10C4, 0x81AC) }, /* MSD Dash Hawk */
+ { USB_DEVICE(0x10C4, 0x81AD) }, /* INSYS USB Modem */
+ { USB_DEVICE(0x10C4, 0x81C8) }, /* Lipowsky Industrie Elektronik GmbH, Baby-JTAG */
+ { USB_DEVICE(0x10C4, 0x81E2) }, /* Lipowsky Industrie Elektronik GmbH, Baby-LIN */
+ { USB_DEVICE(0x10C4, 0x81E7) }, /* Aerocomm Radio */
+ { USB_DEVICE(0x10C4, 0x81E8) }, /* Zephyr Bioharness */
+ { USB_DEVICE(0x10C4, 0x81F2) }, /* C1007 HF band RFID controller */
+ { USB_DEVICE(0x10C4, 0x8218) }, /* Lipowsky Industrie Elektronik GmbH, HARP-1 */
+ { USB_DEVICE(0x10C4, 0x822B) }, /* Modem EDGE(GSM) Comander 2 */
+ { USB_DEVICE(0x10C4, 0x826B) }, /* Cygnal Integrated Products, Inc., Fasttrax GPS demonstration module */
+ { USB_DEVICE(0x10C4, 0x8281) }, /* Nanotec Plug & Drive */
+ { USB_DEVICE(0x10C4, 0x8293) }, /* Telegesis ETRX2USB */
+ { USB_DEVICE(0x10C4, 0x82F9) }, /* Procyon AVS */
+ { USB_DEVICE(0x10C4, 0x8341) }, /* Siemens MC35PU GPRS Modem */
+ { USB_DEVICE(0x10C4, 0x8382) }, /* Cygnal Integrated Products, Inc. */
+ { USB_DEVICE(0x10C4, 0x83A8) }, /* Amber Wireless AMB2560 */
+ { USB_DEVICE(0x10C4, 0x83D8) }, /* DekTec DTA Plus VHF/UHF Booster/Attenuator */
+ { USB_DEVICE(0x10C4, 0x8411) }, /* Kyocera GPS Module */
+ { USB_DEVICE(0x10C4, 0x8418) }, /* IRZ Automation Teleport SG-10 GSM/GPRS Modem */
+ { USB_DEVICE(0x10C4, 0x846E) }, /* BEI USB Sensor Interface (VCP) */
+ { USB_DEVICE(0x10C4, 0x8477) }, /* Balluff RFID */
+ { USB_DEVICE(0x10C4, 0x85EA) }, /* AC-Services IBUS-IF */
+ { USB_DEVICE(0x10C4, 0x85EB) }, /* AC-Services CIS-IBUS */
+ { USB_DEVICE(0x10C4, 0x85F8) }, /* Virtenio Preon32 */
+ { USB_DEVICE(0x10C4, 0x8664) }, /* AC-Services CAN-IF */
+ { USB_DEVICE(0x10C4, 0x8665) }, /* AC-Services OBD-IF */
+ { USB_DEVICE(0x10C4, 0x8856) }, /* CEL EM357 ZigBee USB Stick - LR */
+ { USB_DEVICE(0x10C4, 0x8857) }, /* CEL EM357 ZigBee USB Stick */
+ { USB_DEVICE(0x10C4, 0x88A4) }, /* MMB Networks ZigBee USB Device */
+ { USB_DEVICE(0x10C4, 0x88A5) }, /* Planet Innovation Ingeni ZigBee USB Device */
+ { USB_DEVICE(0x10C4, 0x8946) }, /* Ketra N1 Wireless Interface */
+ { USB_DEVICE(0x10C4, 0x8977) }, /* CEL MeshWorks DevKit Device */
+ { USB_DEVICE(0x10C4, 0x8998) }, /* KCF Technologies PRN */
+ { USB_DEVICE(0x10C4, 0x8A2A) }, /* HubZ dual ZigBee and Z-Wave dongle */
+ { USB_DEVICE(0x10C4, 0xEA60) }, /* Silicon Labs factory default */
+ { USB_DEVICE(0x10C4, 0xEA61) }, /* Silicon Labs factory default */
+ { USB_DEVICE(0x10C4, 0xEA70) }, /* Silicon Labs factory default */
+ { USB_DEVICE(0x10C4, 0xEA80) }, /* Silicon Labs factory default */
+ { USB_DEVICE(0x10C4, 0xEA71) }, /* Infinity GPS-MIC-1 Radio Monophone */
+ { USB_DEVICE(0x10C4, 0xF001) }, /* Elan Digital Systems USBscope50 */
+ { USB_DEVICE(0x10C4, 0xF002) }, /* Elan Digital Systems USBwave12 */
+ { USB_DEVICE(0x10C4, 0xF003) }, /* Elan Digital Systems USBpulse100 */
+ { USB_DEVICE(0x10C4, 0xF004) }, /* Elan Digital Systems USBcount50 */
+ { USB_DEVICE(0x10C5, 0xEA61) }, /* Silicon Labs MobiData GPRS USB Modem */
+ { USB_DEVICE(0x10CE, 0xEA6A) }, /* Silicon Labs MobiData GPRS USB Modem 100EU */
+ { USB_DEVICE(0x13AD, 0x9999) }, /* Baltech card reader */
+ { USB_DEVICE(0x1555, 0x0004) }, /* Owen AC4 USB-RS485 Converter */
+ { USB_DEVICE(0x166A, 0x0201) }, /* Clipsal 5500PACA C-Bus Pascal Automation Controller */
+ { USB_DEVICE(0x166A, 0x0301) }, /* Clipsal 5800PC C-Bus Wireless PC Interface */
+ { USB_DEVICE(0x166A, 0x0303) }, /* Clipsal 5500PCU C-Bus USB interface */
+ { USB_DEVICE(0x166A, 0x0304) }, /* Clipsal 5000CT2 C-Bus Black and White Touchscreen */
+ { USB_DEVICE(0x166A, 0x0305) }, /* Clipsal C-5000CT2 C-Bus Spectrum Colour Touchscreen */
+ { USB_DEVICE(0x166A, 0x0401) }, /* Clipsal L51xx C-Bus Architectural Dimmer */
+ { USB_DEVICE(0x166A, 0x0101) }, /* Clipsal 5560884 C-Bus Multi-room Audio Matrix Switcher */
+ { USB_DEVICE(0x16C0, 0x09B0) }, /* Lunatico Seletek */
+ { USB_DEVICE(0x16C0, 0x09B1) }, /* Lunatico Seletek */
+ { USB_DEVICE(0x16D6, 0x0001) }, /* Jablotron serial interface */
+ { USB_DEVICE(0x16DC, 0x0010) }, /* W-IE-NE-R Plein & Baus GmbH PL512 Power Supply */
+ { USB_DEVICE(0x16DC, 0x0011) }, /* W-IE-NE-R Plein & Baus GmbH RCM Remote Control for MARATON Power Supply */
+ { USB_DEVICE(0x16DC, 0x0012) }, /* W-IE-NE-R Plein & Baus GmbH MPOD Multi Channel Power Supply */
+ { USB_DEVICE(0x16DC, 0x0015) }, /* W-IE-NE-R Plein & Baus GmbH CML Control, Monitoring and Data Logger */
+ { USB_DEVICE(0x17A8, 0x0001) }, /* Kamstrup Optical Eye/3-wire */
+ { USB_DEVICE(0x17A8, 0x0005) }, /* Kamstrup M-Bus Master MultiPort 250D */
+ { USB_DEVICE(0x17F4, 0xAAAA) }, /* Wavesense Jazz blood glucose meter */
+ { USB_DEVICE(0x1843, 0x0200) }, /* Vaisala USB Instrument Cable */
+ { USB_DEVICE(0x18EF, 0xE00F) }, /* ELV USB-I2C-Interface */
+ { USB_DEVICE(0x1ADB, 0x0001) }, /* Schweitzer Engineering C662 Cable */
+ { USB_DEVICE(0x1B1C, 0x1C00) }, /* Corsair USB Dongle */
+ { USB_DEVICE(0x1BA4, 0x0002) }, /* Silicon Labs 358x factory default */
+ { USB_DEVICE(0x1BE3, 0x07A6) }, /* WAGO 750-923 USB Service Cable */
+ { USB_DEVICE(0x1D6F, 0x0010) }, /* Seluxit ApS RF Dongle */
+ { USB_DEVICE(0x1E29, 0x0102) }, /* Festo CPX-USB */
+ { USB_DEVICE(0x1E29, 0x0501) }, /* Festo CMSP */
+ { USB_DEVICE(0x1FB9, 0x0100) }, /* Lake Shore Model 121 Current Source */
+ { USB_DEVICE(0x1FB9, 0x0200) }, /* Lake Shore Model 218A Temperature Monitor */
+ { USB_DEVICE(0x1FB9, 0x0201) }, /* Lake Shore Model 219 Temperature Monitor */
+ { USB_DEVICE(0x1FB9, 0x0202) }, /* Lake Shore Model 233 Temperature Transmitter */
+ { USB_DEVICE(0x1FB9, 0x0203) }, /* Lake Shore Model 235 Temperature Transmitter */
+ { USB_DEVICE(0x1FB9, 0x0300) }, /* Lake Shore Model 335 Temperature Controller */
+ { USB_DEVICE(0x1FB9, 0x0301) }, /* Lake Shore Model 336 Temperature Controller */
+ { USB_DEVICE(0x1FB9, 0x0302) }, /* Lake Shore Model 350 Temperature Controller */
+ { USB_DEVICE(0x1FB9, 0x0303) }, /* Lake Shore Model 371 AC Bridge */
+ { USB_DEVICE(0x1FB9, 0x0400) }, /* Lake Shore Model 411 Handheld Gaussmeter */
+ { USB_DEVICE(0x1FB9, 0x0401) }, /* Lake Shore Model 425 Gaussmeter */
+ { USB_DEVICE(0x1FB9, 0x0402) }, /* Lake Shore Model 455A Gaussmeter */
+ { USB_DEVICE(0x1FB9, 0x0403) }, /* Lake Shore Model 475A Gaussmeter */
+ { USB_DEVICE(0x1FB9, 0x0404) }, /* Lake Shore Model 465 Three Axis Gaussmeter */
+ { USB_DEVICE(0x1FB9, 0x0600) }, /* Lake Shore Model 625A Superconducting MPS */
+ { USB_DEVICE(0x1FB9, 0x0601) }, /* Lake Shore Model 642A Magnet Power Supply */
+ { USB_DEVICE(0x1FB9, 0x0602) }, /* Lake Shore Model 648 Magnet Power Supply */
+ { USB_DEVICE(0x1FB9, 0x0700) }, /* Lake Shore Model 737 VSM Controller */
+ { USB_DEVICE(0x1FB9, 0x0701) }, /* Lake Shore Model 776 Hall Matrix */
+ { USB_DEVICE(0x2626, 0xEA60) }, /* Aruba Networks 7xxx USB Serial Console */
+ { USB_DEVICE(0x3195, 0xF190) }, /* Link Instruments MSO-19 */
+ { USB_DEVICE(0x3195, 0xF280) }, /* Link Instruments MSO-28 */
+ { USB_DEVICE(0x3195, 0xF281) }, /* Link Instruments MSO-28 */
+ { USB_DEVICE(0x413C, 0x9500) }, /* DW700 GPS USB interface */
+ { } /* Terminating Entry */
+};
+
+MODULE_DEVICE_TABLE(usb, id_table);
+
+struct cp210x_serial_private {
+ __u8 bInterfaceNumber;
+};
+
+static struct usb_serial_driver cp210x_device = {
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = "cp210x",
+ },
+ .id_table = id_table,
+ .num_ports = 1,
+ .bulk_in_size = 256,
+ .bulk_out_size = 256,
+ .open = cp210x_open,
+ .close = cp210x_close,
+ .break_ctl = cp210x_break_ctl,
+ .set_termios = cp210x_set_termios,
+ .tiocmget = cp210x_tiocmget,
+ .tiocmset = cp210x_tiocmset,
+ .attach = cp210x_startup,
+ .release = cp210x_release,
+ .dtr_rts = cp210x_dtr_rts
+};
+
+static struct usb_serial_driver * const serial_drivers[] = {
+ &cp210x_device, NULL
+};
+
+/* Config request types */
+#define REQTYPE_HOST_TO_INTERFACE 0x41
+#define REQTYPE_INTERFACE_TO_HOST 0xc1
+#define REQTYPE_HOST_TO_DEVICE 0x40
+#define REQTYPE_DEVICE_TO_HOST 0xc0
+
+/* Config request codes */
+#define CP210X_IFC_ENABLE 0x00
+#define CP210X_SET_BAUDDIV 0x01
+#define CP210X_GET_BAUDDIV 0x02
+#define CP210X_SET_LINE_CTL 0x03
+#define CP210X_GET_LINE_CTL 0x04
+#define CP210X_SET_BREAK 0x05
+#define CP210X_IMM_CHAR 0x06
+#define CP210X_SET_MHS 0x07
+#define CP210X_GET_MDMSTS 0x08
+#define CP210X_SET_XON 0x09
+#define CP210X_SET_XOFF 0x0A
+#define CP210X_SET_EVENTMASK 0x0B
+#define CP210X_GET_EVENTMASK 0x0C
+#define CP210X_SET_CHAR 0x0D
+#define CP210X_GET_CHARS 0x0E
+#define CP210X_GET_PROPS 0x0F
+#define CP210X_GET_COMM_STATUS 0x10
+#define CP210X_RESET 0x11
+#define CP210X_PURGE 0x12
+#define CP210X_SET_FLOW 0x13
+#define CP210X_GET_FLOW 0x14
+#define CP210X_EMBED_EVENTS 0x15
+#define CP210X_GET_EVENTSTATE 0x16
+#define CP210X_SET_CHARS 0x19
+#define CP210X_GET_BAUDRATE 0x1D
+#define CP210X_SET_BAUDRATE 0x1E
+
+/* CP210X_IFC_ENABLE */
+#define UART_ENABLE 0x0001
+#define UART_DISABLE 0x0000
+
+/* CP210X_(SET|GET)_BAUDDIV */
+#define BAUD_RATE_GEN_FREQ 0x384000
+
+/* CP210X_(SET|GET)_LINE_CTL */
+#define BITS_DATA_MASK 0X0f00
+#define BITS_DATA_5 0X0500
+#define BITS_DATA_6 0X0600
+#define BITS_DATA_7 0X0700
+#define BITS_DATA_8 0X0800
+#define BITS_DATA_9 0X0900
+
+#define BITS_PARITY_MASK 0x00f0
+#define BITS_PARITY_NONE 0x0000
+#define BITS_PARITY_ODD 0x0010
+#define BITS_PARITY_EVEN 0x0020
+#define BITS_PARITY_MARK 0x0030
+#define BITS_PARITY_SPACE 0x0040
+
+#define BITS_STOP_MASK 0x000f
+#define BITS_STOP_1 0x0000
+#define BITS_STOP_1_5 0x0001
+#define BITS_STOP_2 0x0002
+
+/* CP210X_SET_BREAK */
+#define BREAK_ON 0x0001
+#define BREAK_OFF 0x0000
+
+/* CP210X_(SET_MHS|GET_MDMSTS) */
+#define CONTROL_DTR 0x0001
+#define CONTROL_RTS 0x0002
+#define CONTROL_CTS 0x0010
+#define CONTROL_DSR 0x0020
+#define CONTROL_RING 0x0040
+#define CONTROL_DCD 0x0080
+#define CONTROL_WRITE_DTR 0x0100
+#define CONTROL_WRITE_RTS 0x0200
+
+/*
+ * cp210x_get_config
+ * Reads from the CP210x configuration registers
+ * 'size' is specified in bytes.
+ * 'data' is a pointer to a pre-allocated array of integers large
+ * enough to hold 'size' bytes (with 4 bytes to each integer)
+ */
+static int cp210x_get_config(struct usb_serial_port *port, u8 request,
+ unsigned int *data, int size)
+{
+ struct usb_serial *serial = port->serial;
+ struct cp210x_serial_private *spriv = usb_get_serial_data(serial);
+ __le32 *buf;
+ int result, i, length;
+
+ /* Number of integers required to contain the array */
+ length = (((size - 1) | 3) + 1) / 4;
+
+ buf = kcalloc(length, sizeof(__le32), GFP_KERNEL);
+ if (!buf)
+ return -ENOMEM;
+
+ /* Issue the request, attempting to read 'size' bytes */
+ result = usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0),
+ request, REQTYPE_INTERFACE_TO_HOST, 0x0000,
+ spriv->bInterfaceNumber, buf, size,
+ USB_CTRL_GET_TIMEOUT);
+
+ /* Convert data into an array of integers */
+ for (i = 0; i < length; i++)
+ data[i] = le32_to_cpu(buf[i]);
+
+ kfree(buf);
+
+ if (result != size) {
+ dev_dbg(&port->dev, "%s - Unable to send config request, request=0x%x size=%d result=%d\n",
+ __func__, request, size, result);
+ if (result > 0)
+ result = -EPROTO;
+
+ return result;
+ }
+
+ return 0;
+}
+
+/*
+ * cp210x_set_config
+ * Writes to the CP210x configuration registers
+ * Values less than 16 bits wide are sent directly
+ * 'size' is specified in bytes.
+ */
+static int cp210x_set_config(struct usb_serial_port *port, u8 request,
+ unsigned int *data, int size)
+{
+ struct usb_serial *serial = port->serial;
+ struct cp210x_serial_private *spriv = usb_get_serial_data(serial);
+ __le32 *buf;
+ int result, i, length;
+
+ /* Number of integers required to contain the array */
+ length = (((size - 1) | 3) + 1) / 4;
+
+ buf = kmalloc(length * sizeof(__le32), GFP_KERNEL);
+ if (!buf)
+ return -ENOMEM;
+
+ /* Array of integers into bytes */
+ for (i = 0; i < length; i++)
+ buf[i] = cpu_to_le32(data[i]);
+
+ if (size > 2) {
+ result = usb_control_msg(serial->dev,
+ usb_sndctrlpipe(serial->dev, 0),
+ request, REQTYPE_HOST_TO_INTERFACE, 0x0000,
+ spriv->bInterfaceNumber, buf, size,
+ USB_CTRL_SET_TIMEOUT);
+ } else {
+ result = usb_control_msg(serial->dev,
+ usb_sndctrlpipe(serial->dev, 0),
+ request, REQTYPE_HOST_TO_INTERFACE, data[0],
+ spriv->bInterfaceNumber, NULL, 0,
+ USB_CTRL_SET_TIMEOUT);
+ }
+
+ kfree(buf);
+
+ if ((size > 2 && result != size) || result < 0) {
+ dev_dbg(&port->dev, "%s - Unable to send request, request=0x%x size=%d result=%d\n",
+ __func__, request, size, result);
+ if (result > 0)
+ result = -EPROTO;
+
+ return result;
+ }
+
+ return 0;
+}
+
+/*
+ * cp210x_set_config_single
+ * Convenience function for calling cp210x_set_config on single data values
+ * without requiring an integer pointer
+ */
+static inline int cp210x_set_config_single(struct usb_serial_port *port,
+ u8 request, unsigned int data)
+{
+ return cp210x_set_config(port, request, &data, 2);
+}
+
+/*
+ * cp210x_quantise_baudrate
+ * Quantises the baud rate as per AN205 Table 1
+ */
+static unsigned int cp210x_quantise_baudrate(unsigned int baud)
+{
+ if (baud <= 300)
+ baud = 300;
+ else if (baud <= 600) baud = 600;
+ else if (baud <= 1200) baud = 1200;
+ else if (baud <= 1800) baud = 1800;
+ else if (baud <= 2400) baud = 2400;
+ else if (baud <= 4000) baud = 4000;
+ else if (baud <= 4803) baud = 4800;
+ else if (baud <= 7207) baud = 7200;
+ else if (baud <= 9612) baud = 9600;
+ else if (baud <= 14428) baud = 14400;
+ else if (baud <= 16062) baud = 16000;
+ else if (baud <= 19250) baud = 19200;
+ else if (baud <= 28912) baud = 28800;
+ else if (baud <= 38601) baud = 38400;
+ else if (baud <= 51558) baud = 51200;
+ else if (baud <= 56280) baud = 56000;
+ else if (baud <= 58053) baud = 57600;
+ else if (baud <= 64111) baud = 64000;
+ else if (baud <= 77608) baud = 76800;
+ else if (baud <= 117028) baud = 115200;
+ else if (baud <= 129347) baud = 128000;
+ else if (baud <= 156868) baud = 153600;
+ else if (baud <= 237832) baud = 230400;
+ else if (baud <= 254234) baud = 250000;
+ else if (baud <= 273066) baud = 256000;
+ else if (baud <= 491520) baud = 460800;
+ else if (baud <= 567138) baud = 500000;
+ else if (baud <= 670254) baud = 576000;
+ else if (baud < 1000000)
+ baud = 921600;
+ else if (baud > 2000000)
+ baud = 2000000;
+ return baud;
+}
+
+static int cp210x_open(struct tty_struct *tty, struct usb_serial_port *port)
+{
+ int result;
+
+ result = cp210x_set_config_single(port, CP210X_IFC_ENABLE,
+ UART_ENABLE);
+ if (result) {
+ dev_err(&port->dev, "%s - Unable to enable UART\n", __func__);
+ return result;
+ }
+
+ /* Configure the termios structure */
+ cp210x_get_termios(tty, port);
+
+ /* The baud rate must be initialised on cp2104 */
+ if (tty)
+ cp210x_change_speed(tty, port, NULL);
+
+ return usb_serial_generic_open(tty, port);
+}
+
+static void cp210x_close(struct usb_serial_port *port)
+{
+ usb_serial_generic_close(port);
+ cp210x_set_config_single(port, CP210X_IFC_ENABLE, UART_DISABLE);
+}
+
+/*
+ * cp210x_get_termios
+ * Reads the baud rate, data bits, parity, stop bits and flow control mode
+ * from the device, corrects any unsupported values, and configures the
+ * termios structure to reflect the state of the device
+ */
+static void cp210x_get_termios(struct tty_struct *tty,
+ struct usb_serial_port *port)
+{
+ unsigned int baud;
+
+ if (tty) {
+ cp210x_get_termios_port(tty->driver_data,
+ &tty->termios.c_cflag, &baud);
+ tty_encode_baud_rate(tty, baud, baud);
+ } else {
+ unsigned int cflag;
+ cflag = 0;
+ cp210x_get_termios_port(port, &cflag, &baud);
+ }
+}
+
+/*
+ * cp210x_get_termios_port
+ * This is the heart of cp210x_get_termios which always uses a &usb_serial_port.
+ */
+static void cp210x_get_termios_port(struct usb_serial_port *port,
+ unsigned int *cflagp, unsigned int *baudp)
+{
+ struct device *dev = &port->dev;
+ unsigned int cflag, modem_ctl[4];
+ unsigned int baud;
+ unsigned int bits;
+
+ cp210x_get_config(port, CP210X_GET_BAUDRATE, &baud, 4);
+
+ dev_dbg(dev, "%s - baud rate = %d\n", __func__, baud);
+ *baudp = baud;
+
+ cflag = *cflagp;
+
+ cp210x_get_config(port, CP210X_GET_LINE_CTL, &bits, 2);
+ cflag &= ~CSIZE;
+ switch (bits & BITS_DATA_MASK) {
+ case BITS_DATA_5:
+ dev_dbg(dev, "%s - data bits = 5\n", __func__);
+ cflag |= CS5;
+ break;
+ case BITS_DATA_6:
+ dev_dbg(dev, "%s - data bits = 6\n", __func__);
+ cflag |= CS6;
+ break;
+ case BITS_DATA_7:
+ dev_dbg(dev, "%s - data bits = 7\n", __func__);
+ cflag |= CS7;
+ break;
+ case BITS_DATA_8:
+ dev_dbg(dev, "%s - data bits = 8\n", __func__);
+ cflag |= CS8;
+ break;
+ case BITS_DATA_9:
+ dev_dbg(dev, "%s - data bits = 9 (not supported, using 8 data bits)\n", __func__);
+ cflag |= CS8;
+ bits &= ~BITS_DATA_MASK;
+ bits |= BITS_DATA_8;
+ cp210x_set_config(port, CP210X_SET_LINE_CTL, &bits, 2);
+ break;
+ default:
+ dev_dbg(dev, "%s - Unknown number of data bits, using 8\n", __func__);
+ cflag |= CS8;
+ bits &= ~BITS_DATA_MASK;
+ bits |= BITS_DATA_8;
+ cp210x_set_config(port, CP210X_SET_LINE_CTL, &bits, 2);
+ break;
+ }
+
+ switch (bits & BITS_PARITY_MASK) {
+ case BITS_PARITY_NONE:
+ dev_dbg(dev, "%s - parity = NONE\n", __func__);
+ cflag &= ~PARENB;
+ break;
+ case BITS_PARITY_ODD:
+ dev_dbg(dev, "%s - parity = ODD\n", __func__);
+ cflag |= (PARENB|PARODD);
+ break;
+ case BITS_PARITY_EVEN:
+ dev_dbg(dev, "%s - parity = EVEN\n", __func__);
+ cflag &= ~PARODD;
+ cflag |= PARENB;
+ break;
+ case BITS_PARITY_MARK:
+ dev_dbg(dev, "%s - parity = MARK\n", __func__);
+ cflag |= (PARENB|PARODD|CMSPAR);
+ break;
+ case BITS_PARITY_SPACE:
+ dev_dbg(dev, "%s - parity = SPACE\n", __func__);
+ cflag &= ~PARODD;
+ cflag |= (PARENB|CMSPAR);
+ break;
+ default:
+ dev_dbg(dev, "%s - Unknown parity mode, disabling parity\n", __func__);
+ cflag &= ~PARENB;
+ bits &= ~BITS_PARITY_MASK;
+ cp210x_set_config(port, CP210X_SET_LINE_CTL, &bits, 2);
+ break;
+ }
+
+ cflag &= ~CSTOPB;
+ switch (bits & BITS_STOP_MASK) {
+ case BITS_STOP_1:
+ dev_dbg(dev, "%s - stop bits = 1\n", __func__);
+ break;
+ case BITS_STOP_1_5:
+ dev_dbg(dev, "%s - stop bits = 1.5 (not supported, using 1 stop bit)\n", __func__);
+ bits &= ~BITS_STOP_MASK;
+ cp210x_set_config(port, CP210X_SET_LINE_CTL, &bits, 2);
+ break;
+ case BITS_STOP_2:
+ dev_dbg(dev, "%s - stop bits = 2\n", __func__);
+ cflag |= CSTOPB;
+ break;
+ default:
+ dev_dbg(dev, "%s - Unknown number of stop bits, using 1 stop bit\n", __func__);
+ bits &= ~BITS_STOP_MASK;
+ cp210x_set_config(port, CP210X_SET_LINE_CTL, &bits, 2);
+ break;
+ }
+
+ cp210x_get_config(port, CP210X_GET_FLOW, modem_ctl, 16);
+ if (modem_ctl[0] & 0x0008) {
+ dev_dbg(dev, "%s - flow control = CRTSCTS\n", __func__);
+ cflag |= CRTSCTS;
+ } else {
+ dev_dbg(dev, "%s - flow control = NONE\n", __func__);
+ cflag &= ~CRTSCTS;
+ }
+
+ *cflagp = cflag;
+}
+
+/*
+ * CP2101 supports the following baud rates:
+ *
+ * 300, 600, 1200, 1800, 2400, 4800, 7200, 9600, 14400, 19200, 28800,
+ * 38400, 56000, 57600, 115200, 128000, 230400, 460800, 921600
+ *
+ * CP2102 and CP2103 support the following additional rates:
+ *
+ * 4000, 16000, 51200, 64000, 76800, 153600, 250000, 256000, 500000,
+ * 576000
+ *
+ * The device will map a requested rate to a supported one, but the result
+ * of requests for rates greater than 1053257 is undefined (see AN205).
+ *
+ * CP2104, CP2105 and CP2110 support most rates up to 2M, 921k and 1M baud,
+ * respectively, with an error less than 1%. The actual rates are determined
+ * by
+ *
+ * div = round(freq / (2 x prescale x request))
+ * actual = freq / (2 x prescale x div)
+ *
+ * For CP2104 and CP2105 freq is 48Mhz and prescale is 4 for request <= 365bps
+ * or 1 otherwise.
+ * For CP2110 freq is 24Mhz and prescale is 4 for request <= 300bps or 1
+ * otherwise.
+ */
+static void cp210x_change_speed(struct tty_struct *tty,
+ struct usb_serial_port *port, struct ktermios *old_termios)
+{
+ u32 baud;
+
+ baud = tty->termios.c_ospeed;
+
+ /* This maps the requested rate to a rate valid on cp2102 or cp2103,
+ * or to an arbitrary rate in [1M,2M].
+ *
+ * NOTE: B0 is not implemented.
+ */
+ baud = cp210x_quantise_baudrate(baud);
+
+ dev_dbg(&port->dev, "%s - setting baud rate to %u\n", __func__, baud);
+ if (cp210x_set_config(port, CP210X_SET_BAUDRATE, &baud,
+ sizeof(baud))) {
+ dev_warn(&port->dev, "failed to set baud rate to %u\n", baud);
+ if (old_termios)
+ baud = old_termios->c_ospeed;
+ else
+ baud = 9600;
+ }
+
+ tty_encode_baud_rate(tty, baud, baud);
+}
+
+static void cp210x_set_termios(struct tty_struct *tty,
+ struct usb_serial_port *port, struct ktermios *old_termios)
+{
+ struct device *dev = &port->dev;
+ unsigned int cflag, old_cflag;
+ unsigned int bits;
+ unsigned int modem_ctl[4];
+
+ cflag = tty->termios.c_cflag;
+ old_cflag = old_termios->c_cflag;
+
+ if (tty->termios.c_ospeed != old_termios->c_ospeed)
+ cp210x_change_speed(tty, port, old_termios);
+
+ /* If the number of data bits is to be updated */
+ if ((cflag & CSIZE) != (old_cflag & CSIZE)) {
+ cp210x_get_config(port, CP210X_GET_LINE_CTL, &bits, 2);
+ bits &= ~BITS_DATA_MASK;
+ switch (cflag & CSIZE) {
+ case CS5:
+ bits |= BITS_DATA_5;
+ dev_dbg(dev, "%s - data bits = 5\n", __func__);
+ break;
+ case CS6:
+ bits |= BITS_DATA_6;
+ dev_dbg(dev, "%s - data bits = 6\n", __func__);
+ break;
+ case CS7:
+ bits |= BITS_DATA_7;
+ dev_dbg(dev, "%s - data bits = 7\n", __func__);
+ break;
+ case CS8:
+ bits |= BITS_DATA_8;
+ dev_dbg(dev, "%s - data bits = 8\n", __func__);
+ break;
+ /*case CS9:
+ bits |= BITS_DATA_9;
+ dev_dbg(dev, "%s - data bits = 9\n", __func__);
+ break;*/
+ default:
+ dev_dbg(dev, "cp210x driver does not support the number of bits requested, using 8 bit mode\n");
+ bits |= BITS_DATA_8;
+ break;
+ }
+ if (cp210x_set_config(port, CP210X_SET_LINE_CTL, &bits, 2))
+ dev_dbg(dev, "Number of data bits requested not supported by device\n");
+ }
+
+ if ((cflag & (PARENB|PARODD|CMSPAR)) !=
+ (old_cflag & (PARENB|PARODD|CMSPAR))) {
+ cp210x_get_config(port, CP210X_GET_LINE_CTL, &bits, 2);
+ bits &= ~BITS_PARITY_MASK;
+ if (cflag & PARENB) {
+ if (cflag & CMSPAR) {
+ if (cflag & PARODD) {
+ bits |= BITS_PARITY_MARK;
+ dev_dbg(dev, "%s - parity = MARK\n", __func__);
+ } else {
+ bits |= BITS_PARITY_SPACE;
+ dev_dbg(dev, "%s - parity = SPACE\n", __func__);
+ }
+ } else {
+ if (cflag & PARODD) {
+ bits |= BITS_PARITY_ODD;
+ dev_dbg(dev, "%s - parity = ODD\n", __func__);
+ } else {
+ bits |= BITS_PARITY_EVEN;
+ dev_dbg(dev, "%s - parity = EVEN\n", __func__);
+ }
+ }
+ }
+ if (cp210x_set_config(port, CP210X_SET_LINE_CTL, &bits, 2))
+ dev_dbg(dev, "Parity mode not supported by device\n");
+ }
+
+ if ((cflag & CSTOPB) != (old_cflag & CSTOPB)) {
+ cp210x_get_config(port, CP210X_GET_LINE_CTL, &bits, 2);
+ bits &= ~BITS_STOP_MASK;
+ if (cflag & CSTOPB) {
+ bits |= BITS_STOP_2;
+ dev_dbg(dev, "%s - stop bits = 2\n", __func__);
+ } else {
+ bits |= BITS_STOP_1;
+ dev_dbg(dev, "%s - stop bits = 1\n", __func__);
+ }
+ if (cp210x_set_config(port, CP210X_SET_LINE_CTL, &bits, 2))
+ dev_dbg(dev, "Number of stop bits requested not supported by device\n");
+ }
+
+ if ((cflag & CRTSCTS) != (old_cflag & CRTSCTS)) {
+ cp210x_get_config(port, CP210X_GET_FLOW, modem_ctl, 16);
+ dev_dbg(dev, "%s - read modem controls = 0x%.4x 0x%.4x 0x%.4x 0x%.4x\n",
+ __func__, modem_ctl[0], modem_ctl[1],
+ modem_ctl[2], modem_ctl[3]);
+
+ if (cflag & CRTSCTS) {
+ modem_ctl[0] &= ~0x7B;
+ modem_ctl[0] |= 0x09;
+ modem_ctl[1] = 0x80;
+ dev_dbg(dev, "%s - flow control = CRTSCTS\n", __func__);
+ } else {
+ modem_ctl[0] &= ~0x7B;
+ modem_ctl[0] |= 0x01;
+ modem_ctl[1] |= 0x40;
+ dev_dbg(dev, "%s - flow control = NONE\n", __func__);
+ }
+
+ dev_dbg(dev, "%s - write modem controls = 0x%.4x 0x%.4x 0x%.4x 0x%.4x\n",
+ __func__, modem_ctl[0], modem_ctl[1],
+ modem_ctl[2], modem_ctl[3]);
+ cp210x_set_config(port, CP210X_SET_FLOW, modem_ctl, 16);
+ }
+
+}
+
+static int cp210x_tiocmset(struct tty_struct *tty,
+ unsigned int set, unsigned int clear)
+{
+ struct usb_serial_port *port = tty->driver_data;
+ return cp210x_tiocmset_port(port, set, clear);
+}
+
+static int cp210x_tiocmset_port(struct usb_serial_port *port,
+ unsigned int set, unsigned int clear)
+{
+ unsigned int control = 0;
+
+ if (set & TIOCM_RTS) {
+ control |= CONTROL_RTS;
+ control |= CONTROL_WRITE_RTS;
+ }
+ if (set & TIOCM_DTR) {
+ control |= CONTROL_DTR;
+ control |= CONTROL_WRITE_DTR;
+ }
+ if (clear & TIOCM_RTS) {
+ control &= ~CONTROL_RTS;
+ control |= CONTROL_WRITE_RTS;
+ }
+ if (clear & TIOCM_DTR) {
+ control &= ~CONTROL_DTR;
+ control |= CONTROL_WRITE_DTR;
+ }
+
+ dev_dbg(&port->dev, "%s - control = 0x%.4x\n", __func__, control);
+
+ return cp210x_set_config(port, CP210X_SET_MHS, &control, 2);
+}
+
+static void cp210x_dtr_rts(struct usb_serial_port *p, int on)
+{
+ if (on)
+ cp210x_tiocmset_port(p, TIOCM_DTR|TIOCM_RTS, 0);
+ else
+ cp210x_tiocmset_port(p, 0, TIOCM_DTR|TIOCM_RTS);
+}
+
+static int cp210x_tiocmget(struct tty_struct *tty)
+{
+ struct usb_serial_port *port = tty->driver_data;
+ unsigned int control;
+ int result;
+
+ cp210x_get_config(port, CP210X_GET_MDMSTS, &control, 1);
+
+ result = ((control & CONTROL_DTR) ? TIOCM_DTR : 0)
+ |((control & CONTROL_RTS) ? TIOCM_RTS : 0)
+ |((control & CONTROL_CTS) ? TIOCM_CTS : 0)
+ |((control & CONTROL_DSR) ? TIOCM_DSR : 0)
+ |((control & CONTROL_RING)? TIOCM_RI : 0)
+ |((control & CONTROL_DCD) ? TIOCM_CD : 0);
+
+ dev_dbg(&port->dev, "%s - control = 0x%.2x\n", __func__, control);
+
+ return result;
+}
+
+static void cp210x_break_ctl(struct tty_struct *tty, int break_state)
+{
+ struct usb_serial_port *port = tty->driver_data;
+ unsigned int state;
+
+ if (break_state == 0)
+ state = BREAK_OFF;
+ else
+ state = BREAK_ON;
+ dev_dbg(&port->dev, "%s - turning break %s\n", __func__,
+ state == BREAK_OFF ? "off" : "on");
+ cp210x_set_config(port, CP210X_SET_BREAK, &state, 2);
+}
+
+static int cp210x_startup(struct usb_serial *serial)
+{
+ struct usb_host_interface *cur_altsetting;
+ struct cp210x_serial_private *spriv;
+
+ spriv = kzalloc(sizeof(*spriv), GFP_KERNEL);
+ if (!spriv)
+ return -ENOMEM;
+
+ cur_altsetting = serial->interface->cur_altsetting;
+ spriv->bInterfaceNumber = cur_altsetting->desc.bInterfaceNumber;
+
+ usb_set_serial_data(serial, spriv);
+
+ return 0;
+}
+
+static void cp210x_release(struct usb_serial *serial)
+{
+ struct cp210x_serial_private *spriv;
+
+ spriv = usb_get_serial_data(serial);
+ kfree(spriv);
+}
+
+module_usb_serial_driver(serial_drivers, id_table);
+
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_LICENSE("GPL");