summaryrefslogtreecommitdiff
path: root/drivers/usb/serial/keyspan_usa90msg.h
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/usb/serial/keyspan_usa90msg.h')
-rw-r--r--drivers/usb/serial/keyspan_usa90msg.h198
1 files changed, 198 insertions, 0 deletions
diff --git a/drivers/usb/serial/keyspan_usa90msg.h b/drivers/usb/serial/keyspan_usa90msg.h
new file mode 100644
index 000000000..86708ecd8
--- /dev/null
+++ b/drivers/usb/serial/keyspan_usa90msg.h
@@ -0,0 +1,198 @@
+/*
+ usa90msg.h
+
+ Copyright (c) 1998-2003 InnoSys Incorporated. All Rights Reserved
+ This file is available under a BSD-style copyright
+
+ Keyspan USB Async Message Formats for the USA19HS
+
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are
+ met:
+
+ 1. Redistributions of source code must retain this licence text
+ without modification, this list of conditions, and the following
+ disclaimer. The following copyright notice must appear immediately at
+ the beginning of all source files:
+
+ Copyright (c) 1998-2003 InnoSys Incorporated. All Rights Reserved
+
+ This file is available under a BSD-style copyright
+
+ 2. The name of InnoSys Incorporated may not be used to endorse or promote
+ products derived from this software without specific prior written
+ permission.
+
+ THIS SOFTWARE IS PROVIDED BY INNOSYS CORP. ``AS IS'' AND ANY EXPRESS OR
+ IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
+ OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT,
+ INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ SUCH DAMAGE.
+
+ Revisions:
+
+ 2003feb14 add setTxMode/txMode and cancelRxXoff to portControl
+ 2003mar21 change name of PARITY_0/1 to add MARK/SPACE
+*/
+
+#ifndef __USA90MSG__
+#define __USA90MSG__
+
+struct keyspan_usa90_portControlMessage
+{
+ /*
+ there are three types of "commands" sent in the control message:
+
+ 1. configuration changes which must be requested by setting
+ the corresponding "set" flag (and should only be requested
+ when necessary, to reduce overhead on the device):
+ */
+
+ u8 setClocking, // host requests baud rate be set
+ baudLo, // host does baud divisor calculation
+ baudHi, // host does baud divisor calculation
+
+ setLcr, // host requests lcr be set
+ lcr, // use PARITY, STOPBITS, DATABITS below
+
+ setRxMode, // set receive mode
+ rxMode, // RXMODE_DMA or RXMODE_BYHAND
+
+ setTxMode, // set transmit mode
+ txMode, // TXMODE_DMA or TXMODE_BYHAND
+
+ setTxFlowControl, // host requests tx flow control be set
+ txFlowControl , // use TX_FLOW... bits below
+ setRxFlowControl, // host requests rx flow control be set
+ rxFlowControl, // use RX_FLOW... bits below
+ sendXoff, // host requests XOFF transmitted immediately
+ sendXon, // host requests XON char transmitted
+ xonChar, // specified in current character format
+ xoffChar, // specified in current character format
+
+ sendChar, // host requests char transmitted immediately
+ txChar, // character to send
+
+ setRts, // host requests RTS output be set
+ rts, // 1=on, 0=off
+ setDtr, // host requests DTR output be set
+ dtr; // 1=on, 0=off
+
+
+ /*
+ 2. configuration data which is simply used as is
+ and must be specified correctly in every host message.
+ */
+
+ u8 rxForwardingLength, // forward when this number of chars available
+ rxForwardingTimeout, // (1-31 in ms)
+ txAckSetting; // 0=don't ack, 1=normal, 2-255 TBD...
+ /*
+ 3. Firmware states which cause actions if they change
+ and must be specified correctly in every host message.
+ */
+
+ u8 portEnabled, // 0=disabled, 1=enabled
+ txFlush, // 0=normal, 1=toss outbound data
+ txBreak, // 0=break off, 1=break on
+ loopbackMode; // 0=no loopback, 1=loopback enabled
+
+ /*
+ 4. commands which are flags only; these are processed in order
+ (so that, e.g., if rxFlush and rxForward flags are set, the
+ port will have no data to forward); any non-zero value
+ is respected
+ */
+
+ u8 rxFlush, // toss inbound data
+ rxForward, // forward all inbound data, NOW (as if fwdLen==1)
+ cancelRxXoff, // cancel any receive XOFF state (_txXoff)
+ returnStatus; // return current status NOW
+};
+
+// defines for bits in lcr
+#define USA_DATABITS_5 0x00
+#define USA_DATABITS_6 0x01
+#define USA_DATABITS_7 0x02
+#define USA_DATABITS_8 0x03
+#define STOPBITS_5678_1 0x00 // 1 stop bit for all byte sizes
+#define STOPBITS_5_1p5 0x04 // 1.5 stop bits for 5-bit byte
+#define STOPBITS_678_2 0x04 // 2 stop bits for 6-8 bit byte
+#define USA_PARITY_NONE 0x00
+#define USA_PARITY_ODD 0x08
+#define USA_PARITY_EVEN 0x18
+#define PARITY_MARK_1 0x28 // force parity MARK
+#define PARITY_SPACE_0 0x38 // force parity SPACE
+
+#define TXFLOW_CTS 0x04
+#define TXFLOW_DSR 0x08
+#define TXFLOW_XOFF 0x01
+#define TXFLOW_XOFF_ANY 0x02
+#define TXFLOW_XOFF_BITS (TXFLOW_XOFF | TXFLOW_XOFF_ANY)
+
+#define RXFLOW_XOFF 0x10
+#define RXFLOW_RTS 0x20
+#define RXFLOW_DTR 0x40
+#define RXFLOW_DSR_SENSITIVITY 0x80
+
+#define RXMODE_BYHAND 0x00
+#define RXMODE_DMA 0x02
+
+#define TXMODE_BYHAND 0x00
+#define TXMODE_DMA 0x02
+
+
+// all things called "StatusMessage" are sent on the status endpoint
+
+struct keyspan_usa90_portStatusMessage
+{
+ u8 msr, // reports the actual MSR register
+ cts, // reports CTS pin
+ dcd, // reports DCD pin
+ dsr, // reports DSR pin
+ ri, // reports RI pin
+ _txXoff, // port is in XOFF state (we received XOFF)
+ rxBreak, // reports break state
+ rxOverrun, // count of overrun errors (since last reported)
+ rxParity, // count of parity errors (since last reported)
+ rxFrame, // count of frame errors (since last reported)
+ portState, // PORTSTATE_xxx bits (useful for debugging)
+ messageAck, // message acknowledgement
+ charAck, // character acknowledgement
+ controlResponse; // (value = returnStatus) a control message has been processed
+};
+
+// bits in RX data message when STAT byte is included
+
+#define RXERROR_OVERRUN 0x02
+#define RXERROR_PARITY 0x04
+#define RXERROR_FRAMING 0x08
+#define RXERROR_BREAK 0x10
+
+#define PORTSTATE_ENABLED 0x80
+#define PORTSTATE_TXFLUSH 0x01
+#define PORTSTATE_TXBREAK 0x02
+#define PORTSTATE_LOOPBACK 0x04
+
+// MSR bits
+
+#define USA_MSR_dCTS 0x01 // CTS has changed since last report
+#define USA_MSR_dDSR 0x02
+#define USA_MSR_dRI 0x04
+#define USA_MSR_dDCD 0x08
+
+#define USA_MSR_CTS 0x10 // current state of CTS
+#define USA_MSR_DSR 0x20
+#define USA_USA_MSR_RI 0x40
+#define MSR_DCD 0x80
+
+// ie: the maximum length of an endpoint buffer
+#define MAX_DATA_LEN 64
+
+#endif