summaryrefslogtreecommitdiff
path: root/drivers/usb/serial/pl2303.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/usb/serial/pl2303.c')
-rw-r--r--drivers/usb/serial/pl2303.c948
1 files changed, 948 insertions, 0 deletions
diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c
new file mode 100644
index 000000000..f5257af33
--- /dev/null
+++ b/drivers/usb/serial/pl2303.c
@@ -0,0 +1,948 @@
+/*
+ * Prolific PL2303 USB to serial adaptor driver
+ *
+ * Copyright (C) 2001-2007 Greg Kroah-Hartman (greg@kroah.com)
+ * Copyright (C) 2003 IBM Corp.
+ *
+ * Original driver for 2.2.x by anonymous
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation.
+ *
+ * See Documentation/usb/usb-serial.txt for more information on using this
+ * driver
+ */
+
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/slab.h>
+#include <linux/tty.h>
+#include <linux/tty_driver.h>
+#include <linux/tty_flip.h>
+#include <linux/serial.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/spinlock.h>
+#include <linux/uaccess.h>
+#include <linux/usb.h>
+#include <linux/usb/serial.h>
+#include <asm/unaligned.h>
+#include "pl2303.h"
+
+
+#define PL2303_QUIRK_UART_STATE_IDX0 BIT(0)
+#define PL2303_QUIRK_LEGACY BIT(1)
+
+static const struct usb_device_id id_table[] = {
+ { USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID) },
+ { USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_RSAQ2) },
+ { USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_DCU11) },
+ { USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_RSAQ3) },
+ { USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_PHAROS) },
+ { USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_ALDIGA) },
+ { USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_MMX) },
+ { USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_GPRS) },
+ { USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_HCR331) },
+ { USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_MOTOROLA) },
+ { USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_ZTEK) },
+ { USB_DEVICE(IODATA_VENDOR_ID, IODATA_PRODUCT_ID) },
+ { USB_DEVICE(IODATA_VENDOR_ID, IODATA_PRODUCT_ID_RSAQ5) },
+ { USB_DEVICE(ATEN_VENDOR_ID, ATEN_PRODUCT_ID) },
+ { USB_DEVICE(ATEN_VENDOR_ID2, ATEN_PRODUCT_ID) },
+ { USB_DEVICE(ELCOM_VENDOR_ID, ELCOM_PRODUCT_ID) },
+ { USB_DEVICE(ELCOM_VENDOR_ID, ELCOM_PRODUCT_ID_UCSGT) },
+ { USB_DEVICE(ITEGNO_VENDOR_ID, ITEGNO_PRODUCT_ID) },
+ { USB_DEVICE(ITEGNO_VENDOR_ID, ITEGNO_PRODUCT_ID_2080) },
+ { USB_DEVICE(MA620_VENDOR_ID, MA620_PRODUCT_ID) },
+ { USB_DEVICE(RATOC_VENDOR_ID, RATOC_PRODUCT_ID) },
+ { USB_DEVICE(TRIPP_VENDOR_ID, TRIPP_PRODUCT_ID) },
+ { USB_DEVICE(RADIOSHACK_VENDOR_ID, RADIOSHACK_PRODUCT_ID) },
+ { USB_DEVICE(DCU10_VENDOR_ID, DCU10_PRODUCT_ID) },
+ { USB_DEVICE(SITECOM_VENDOR_ID, SITECOM_PRODUCT_ID) },
+ { USB_DEVICE(ALCATEL_VENDOR_ID, ALCATEL_PRODUCT_ID) },
+ { USB_DEVICE(SIEMENS_VENDOR_ID, SIEMENS_PRODUCT_ID_SX1),
+ .driver_info = PL2303_QUIRK_UART_STATE_IDX0 },
+ { USB_DEVICE(SIEMENS_VENDOR_ID, SIEMENS_PRODUCT_ID_X65),
+ .driver_info = PL2303_QUIRK_UART_STATE_IDX0 },
+ { USB_DEVICE(SIEMENS_VENDOR_ID, SIEMENS_PRODUCT_ID_X75),
+ .driver_info = PL2303_QUIRK_UART_STATE_IDX0 },
+ { USB_DEVICE(SIEMENS_VENDOR_ID, SIEMENS_PRODUCT_ID_EF81) },
+ { USB_DEVICE(BENQ_VENDOR_ID, BENQ_PRODUCT_ID_S81) }, /* Benq/Siemens S81 */
+ { USB_DEVICE(SYNTECH_VENDOR_ID, SYNTECH_PRODUCT_ID) },
+ { USB_DEVICE(NOKIA_CA42_VENDOR_ID, NOKIA_CA42_PRODUCT_ID) },
+ { USB_DEVICE(CA_42_CA42_VENDOR_ID, CA_42_CA42_PRODUCT_ID) },
+ { USB_DEVICE(SAGEM_VENDOR_ID, SAGEM_PRODUCT_ID) },
+ { USB_DEVICE(LEADTEK_VENDOR_ID, LEADTEK_9531_PRODUCT_ID) },
+ { USB_DEVICE(SPEEDDRAGON_VENDOR_ID, SPEEDDRAGON_PRODUCT_ID) },
+ { USB_DEVICE(DATAPILOT_U2_VENDOR_ID, DATAPILOT_U2_PRODUCT_ID) },
+ { USB_DEVICE(BELKIN_VENDOR_ID, BELKIN_PRODUCT_ID) },
+ { USB_DEVICE(ALCOR_VENDOR_ID, ALCOR_PRODUCT_ID) },
+ { USB_DEVICE(WS002IN_VENDOR_ID, WS002IN_PRODUCT_ID) },
+ { USB_DEVICE(COREGA_VENDOR_ID, COREGA_PRODUCT_ID) },
+ { USB_DEVICE(YCCABLE_VENDOR_ID, YCCABLE_PRODUCT_ID) },
+ { USB_DEVICE(SUPERIAL_VENDOR_ID, SUPERIAL_PRODUCT_ID) },
+ { USB_DEVICE(HP_VENDOR_ID, HP_LD220_PRODUCT_ID) },
+ { USB_DEVICE(HP_VENDOR_ID, HP_LD960_PRODUCT_ID) },
+ { USB_DEVICE(HP_VENDOR_ID, HP_LCM220_PRODUCT_ID) },
+ { USB_DEVICE(HP_VENDOR_ID, HP_LCM960_PRODUCT_ID) },
+ { USB_DEVICE(CRESSI_VENDOR_ID, CRESSI_EDY_PRODUCT_ID) },
+ { USB_DEVICE(ZEAGLE_VENDOR_ID, ZEAGLE_N2ITION3_PRODUCT_ID) },
+ { USB_DEVICE(SONY_VENDOR_ID, SONY_QN3USB_PRODUCT_ID) },
+ { USB_DEVICE(SANWA_VENDOR_ID, SANWA_PRODUCT_ID) },
+ { USB_DEVICE(ADLINK_VENDOR_ID, ADLINK_ND6530_PRODUCT_ID) },
+ { USB_DEVICE(SMART_VENDOR_ID, SMART_PRODUCT_ID) },
+ { } /* Terminating entry */
+};
+
+MODULE_DEVICE_TABLE(usb, id_table);
+
+#define SET_LINE_REQUEST_TYPE 0x21
+#define SET_LINE_REQUEST 0x20
+
+#define SET_CONTROL_REQUEST_TYPE 0x21
+#define SET_CONTROL_REQUEST 0x22
+#define CONTROL_DTR 0x01
+#define CONTROL_RTS 0x02
+
+#define BREAK_REQUEST_TYPE 0x21
+#define BREAK_REQUEST 0x23
+#define BREAK_ON 0xffff
+#define BREAK_OFF 0x0000
+
+#define GET_LINE_REQUEST_TYPE 0xa1
+#define GET_LINE_REQUEST 0x21
+
+#define VENDOR_WRITE_REQUEST_TYPE 0x40
+#define VENDOR_WRITE_REQUEST 0x01
+
+#define VENDOR_READ_REQUEST_TYPE 0xc0
+#define VENDOR_READ_REQUEST 0x01
+
+#define UART_STATE_INDEX 8
+#define UART_STATE_MSR_MASK 0x8b
+#define UART_STATE_TRANSIENT_MASK 0x74
+#define UART_DCD 0x01
+#define UART_DSR 0x02
+#define UART_BREAK_ERROR 0x04
+#define UART_RING 0x08
+#define UART_FRAME_ERROR 0x10
+#define UART_PARITY_ERROR 0x20
+#define UART_OVERRUN_ERROR 0x40
+#define UART_CTS 0x80
+
+static void pl2303_set_break(struct usb_serial_port *port, bool enable);
+
+enum pl2303_type {
+ TYPE_01, /* Type 0 and 1 (difference unknown) */
+ TYPE_HX, /* HX version of the pl2303 chip */
+ TYPE_COUNT
+};
+
+struct pl2303_type_data {
+ speed_t max_baud_rate;
+ unsigned long quirks;
+};
+
+struct pl2303_serial_private {
+ const struct pl2303_type_data *type;
+ unsigned long quirks;
+};
+
+struct pl2303_private {
+ spinlock_t lock;
+ u8 line_control;
+ u8 line_status;
+
+ u8 line_settings[7];
+};
+
+static const struct pl2303_type_data pl2303_type_data[TYPE_COUNT] = {
+ [TYPE_01] = {
+ .max_baud_rate = 1228800,
+ .quirks = PL2303_QUIRK_LEGACY,
+ },
+ [TYPE_HX] = {
+ .max_baud_rate = 12000000,
+ },
+};
+
+static int pl2303_vendor_read(struct usb_serial *serial, u16 value,
+ unsigned char buf[1])
+{
+ struct device *dev = &serial->interface->dev;
+ int res;
+
+ res = usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0),
+ VENDOR_READ_REQUEST, VENDOR_READ_REQUEST_TYPE,
+ value, 0, buf, 1, 100);
+ if (res != 1) {
+ dev_err(dev, "%s - failed to read [%04x]: %d\n", __func__,
+ value, res);
+ if (res >= 0)
+ res = -EIO;
+
+ return res;
+ }
+
+ dev_dbg(dev, "%s - [%04x] = %02x\n", __func__, value, buf[0]);
+
+ return 0;
+}
+
+static int pl2303_vendor_write(struct usb_serial *serial, u16 value, u16 index)
+{
+ struct device *dev = &serial->interface->dev;
+ int res;
+
+ dev_dbg(dev, "%s - [%04x] = %02x\n", __func__, value, index);
+
+ res = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
+ VENDOR_WRITE_REQUEST, VENDOR_WRITE_REQUEST_TYPE,
+ value, index, NULL, 0, 100);
+ if (res) {
+ dev_err(dev, "%s - failed to write [%04x]: %d\n", __func__,
+ value, res);
+ return res;
+ }
+
+ return 0;
+}
+
+static int pl2303_probe(struct usb_serial *serial,
+ const struct usb_device_id *id)
+{
+ usb_set_serial_data(serial, (void *)id->driver_info);
+
+ return 0;
+}
+
+static int pl2303_startup(struct usb_serial *serial)
+{
+ struct pl2303_serial_private *spriv;
+ enum pl2303_type type = TYPE_01;
+ unsigned char *buf;
+
+ spriv = kzalloc(sizeof(*spriv), GFP_KERNEL);
+ if (!spriv)
+ return -ENOMEM;
+
+ buf = kmalloc(1, GFP_KERNEL);
+ if (!buf) {
+ kfree(spriv);
+ return -ENOMEM;
+ }
+
+ if (serial->dev->descriptor.bDeviceClass == 0x02)
+ type = TYPE_01; /* type 0 */
+ else if (serial->dev->descriptor.bMaxPacketSize0 == 0x40)
+ type = TYPE_HX;
+ else if (serial->dev->descriptor.bDeviceClass == 0x00)
+ type = TYPE_01; /* type 1 */
+ else if (serial->dev->descriptor.bDeviceClass == 0xFF)
+ type = TYPE_01; /* type 1 */
+ dev_dbg(&serial->interface->dev, "device type: %d\n", type);
+
+ spriv->type = &pl2303_type_data[type];
+ spriv->quirks = (unsigned long)usb_get_serial_data(serial);
+ spriv->quirks |= spriv->type->quirks;
+
+ usb_set_serial_data(serial, spriv);
+
+ pl2303_vendor_read(serial, 0x8484, buf);
+ pl2303_vendor_write(serial, 0x0404, 0);
+ pl2303_vendor_read(serial, 0x8484, buf);
+ pl2303_vendor_read(serial, 0x8383, buf);
+ pl2303_vendor_read(serial, 0x8484, buf);
+ pl2303_vendor_write(serial, 0x0404, 1);
+ pl2303_vendor_read(serial, 0x8484, buf);
+ pl2303_vendor_read(serial, 0x8383, buf);
+ pl2303_vendor_write(serial, 0, 1);
+ pl2303_vendor_write(serial, 1, 0);
+ if (spriv->quirks & PL2303_QUIRK_LEGACY)
+ pl2303_vendor_write(serial, 2, 0x24);
+ else
+ pl2303_vendor_write(serial, 2, 0x44);
+
+ kfree(buf);
+
+ return 0;
+}
+
+static void pl2303_release(struct usb_serial *serial)
+{
+ struct pl2303_serial_private *spriv = usb_get_serial_data(serial);
+
+ kfree(spriv);
+}
+
+static int pl2303_port_probe(struct usb_serial_port *port)
+{
+ struct pl2303_private *priv;
+
+ priv = kzalloc(sizeof(*priv), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+
+ spin_lock_init(&priv->lock);
+
+ usb_set_serial_port_data(port, priv);
+
+ port->port.drain_delay = 256;
+
+ return 0;
+}
+
+static int pl2303_port_remove(struct usb_serial_port *port)
+{
+ struct pl2303_private *priv = usb_get_serial_port_data(port);
+
+ kfree(priv);
+
+ return 0;
+}
+
+static int pl2303_set_control_lines(struct usb_serial_port *port, u8 value)
+{
+ struct usb_device *dev = port->serial->dev;
+ int retval;
+
+ dev_dbg(&port->dev, "%s - %02x\n", __func__, value);
+
+ retval = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
+ SET_CONTROL_REQUEST, SET_CONTROL_REQUEST_TYPE,
+ value, 0, NULL, 0, 100);
+ if (retval)
+ dev_err(&port->dev, "%s - failed: %d\n", __func__, retval);
+
+ return retval;
+}
+
+/*
+ * Returns the nearest supported baud rate that can be set directly without
+ * using divisors.
+ */
+static speed_t pl2303_get_supported_baud_rate(speed_t baud)
+{
+ static const speed_t baud_sup[] = {
+ 75, 150, 300, 600, 1200, 1800, 2400, 3600, 4800, 7200, 9600,
+ 14400, 19200, 28800, 38400, 57600, 115200, 230400, 460800,
+ 614400, 921600, 1228800, 2457600, 3000000, 6000000
+ };
+
+ unsigned i;
+
+ for (i = 0; i < ARRAY_SIZE(baud_sup); ++i) {
+ if (baud_sup[i] > baud)
+ break;
+ }
+
+ if (i == ARRAY_SIZE(baud_sup))
+ baud = baud_sup[i - 1];
+ else if (i > 0 && (baud_sup[i] - baud) > (baud - baud_sup[i - 1]))
+ baud = baud_sup[i - 1];
+ else
+ baud = baud_sup[i];
+
+ return baud;
+}
+
+/*
+ * NOTE: If unsupported baud rates are set directly, the PL2303 seems to
+ * use 9600 baud.
+ */
+static speed_t pl2303_encode_baud_rate_direct(unsigned char buf[4],
+ speed_t baud)
+{
+ put_unaligned_le32(baud, buf);
+
+ return baud;
+}
+
+static speed_t pl2303_encode_baud_rate_divisor(unsigned char buf[4],
+ speed_t baud)
+{
+ unsigned int tmp;
+
+ /*
+ * Apparently the formula is:
+ * baudrate = 12M * 32 / (2^buf[1]) / buf[0]
+ */
+ tmp = 12000000 * 32 / baud;
+ buf[3] = 0x80;
+ buf[2] = 0;
+ buf[1] = (tmp >= 256);
+ while (tmp >= 256) {
+ tmp >>= 2;
+ buf[1] <<= 1;
+ }
+ buf[0] = tmp;
+
+ return baud;
+}
+
+static void pl2303_encode_baud_rate(struct tty_struct *tty,
+ struct usb_serial_port *port,
+ u8 buf[4])
+{
+ struct usb_serial *serial = port->serial;
+ struct pl2303_serial_private *spriv = usb_get_serial_data(serial);
+ speed_t baud_sup;
+ speed_t baud;
+
+ baud = tty_get_baud_rate(tty);
+ dev_dbg(&port->dev, "baud requested = %u\n", baud);
+ if (!baud)
+ return;
+
+ if (spriv->type->max_baud_rate)
+ baud = min_t(speed_t, baud, spriv->type->max_baud_rate);
+ /*
+ * Use direct method for supported baud rates, otherwise use divisors.
+ */
+ baud_sup = pl2303_get_supported_baud_rate(baud);
+
+ if (baud == baud_sup)
+ baud = pl2303_encode_baud_rate_direct(buf, baud);
+ else
+ baud = pl2303_encode_baud_rate_divisor(buf, baud);
+
+ /* Save resulting baud rate */
+ tty_encode_baud_rate(tty, baud, baud);
+ dev_dbg(&port->dev, "baud set = %u\n", baud);
+}
+
+static int pl2303_get_line_request(struct usb_serial_port *port,
+ unsigned char buf[7])
+{
+ struct usb_device *udev = port->serial->dev;
+ int ret;
+
+ ret = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0),
+ GET_LINE_REQUEST, GET_LINE_REQUEST_TYPE,
+ 0, 0, buf, 7, 100);
+ if (ret != 7) {
+ dev_err(&port->dev, "%s - failed: %d\n", __func__, ret);
+
+ if (ret > 0)
+ ret = -EIO;
+
+ return ret;
+ }
+
+ dev_dbg(&port->dev, "%s - %7ph\n", __func__, buf);
+
+ return 0;
+}
+
+static int pl2303_set_line_request(struct usb_serial_port *port,
+ unsigned char buf[7])
+{
+ struct usb_device *udev = port->serial->dev;
+ int ret;
+
+ ret = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
+ SET_LINE_REQUEST, SET_LINE_REQUEST_TYPE,
+ 0, 0, buf, 7, 100);
+ if (ret != 7) {
+ dev_err(&port->dev, "%s - failed: %d\n", __func__, ret);
+
+ if (ret > 0)
+ ret = -EIO;
+
+ return ret;
+ }
+
+ dev_dbg(&port->dev, "%s - %7ph\n", __func__, buf);
+
+ return 0;
+}
+
+static void pl2303_set_termios(struct tty_struct *tty,
+ struct usb_serial_port *port, struct ktermios *old_termios)
+{
+ struct usb_serial *serial = port->serial;
+ struct pl2303_serial_private *spriv = usb_get_serial_data(serial);
+ struct pl2303_private *priv = usb_get_serial_port_data(port);
+ unsigned long flags;
+ unsigned char *buf;
+ int ret;
+ u8 control;
+
+ if (old_termios && !tty_termios_hw_change(&tty->termios, old_termios))
+ return;
+
+ buf = kzalloc(7, GFP_KERNEL);
+ if (!buf) {
+ /* Report back no change occurred */
+ if (old_termios)
+ tty->termios = *old_termios;
+ return;
+ }
+
+ pl2303_get_line_request(port, buf);
+
+ switch (C_CSIZE(tty)) {
+ case CS5:
+ buf[6] = 5;
+ break;
+ case CS6:
+ buf[6] = 6;
+ break;
+ case CS7:
+ buf[6] = 7;
+ break;
+ default:
+ case CS8:
+ buf[6] = 8;
+ }
+ dev_dbg(&port->dev, "data bits = %d\n", buf[6]);
+
+ /* For reference buf[0]:buf[3] baud rate value */
+ pl2303_encode_baud_rate(tty, port, &buf[0]);
+
+ /* For reference buf[4]=0 is 1 stop bits */
+ /* For reference buf[4]=1 is 1.5 stop bits */
+ /* For reference buf[4]=2 is 2 stop bits */
+ if (C_CSTOPB(tty)) {
+ /*
+ * NOTE: Comply with "real" UARTs / RS232:
+ * use 1.5 instead of 2 stop bits with 5 data bits
+ */
+ if (C_CSIZE(tty) == CS5) {
+ buf[4] = 1;
+ dev_dbg(&port->dev, "stop bits = 1.5\n");
+ } else {
+ buf[4] = 2;
+ dev_dbg(&port->dev, "stop bits = 2\n");
+ }
+ } else {
+ buf[4] = 0;
+ dev_dbg(&port->dev, "stop bits = 1\n");
+ }
+
+ if (C_PARENB(tty)) {
+ /* For reference buf[5]=0 is none parity */
+ /* For reference buf[5]=1 is odd parity */
+ /* For reference buf[5]=2 is even parity */
+ /* For reference buf[5]=3 is mark parity */
+ /* For reference buf[5]=4 is space parity */
+ if (C_PARODD(tty)) {
+ if (C_CMSPAR(tty)) {
+ buf[5] = 3;
+ dev_dbg(&port->dev, "parity = mark\n");
+ } else {
+ buf[5] = 1;
+ dev_dbg(&port->dev, "parity = odd\n");
+ }
+ } else {
+ if (C_CMSPAR(tty)) {
+ buf[5] = 4;
+ dev_dbg(&port->dev, "parity = space\n");
+ } else {
+ buf[5] = 2;
+ dev_dbg(&port->dev, "parity = even\n");
+ }
+ }
+ } else {
+ buf[5] = 0;
+ dev_dbg(&port->dev, "parity = none\n");
+ }
+
+ /*
+ * Some PL2303 are known to lose bytes if you change serial settings
+ * even to the same values as before. Thus we actually need to filter
+ * in this specific case.
+ *
+ * Note that the tty_termios_hw_change check above is not sufficient
+ * as a previously requested baud rate may differ from the one
+ * actually used (and stored in old_termios).
+ *
+ * NOTE: No additional locking needed for line_settings as it is
+ * only used in set_termios, which is serialised against itself.
+ */
+ if (!old_termios || memcmp(buf, priv->line_settings, 7)) {
+ ret = pl2303_set_line_request(port, buf);
+ if (!ret)
+ memcpy(priv->line_settings, buf, 7);
+ }
+
+ /* change control lines if we are switching to or from B0 */
+ spin_lock_irqsave(&priv->lock, flags);
+ control = priv->line_control;
+ if (C_BAUD(tty) == B0)
+ priv->line_control &= ~(CONTROL_DTR | CONTROL_RTS);
+ else if (old_termios && (old_termios->c_cflag & CBAUD) == B0)
+ priv->line_control |= (CONTROL_DTR | CONTROL_RTS);
+ if (control != priv->line_control) {
+ control = priv->line_control;
+ spin_unlock_irqrestore(&priv->lock, flags);
+ pl2303_set_control_lines(port, control);
+ } else {
+ spin_unlock_irqrestore(&priv->lock, flags);
+ }
+
+ if (C_CRTSCTS(tty)) {
+ if (spriv->quirks & PL2303_QUIRK_LEGACY)
+ pl2303_vendor_write(serial, 0x0, 0x41);
+ else
+ pl2303_vendor_write(serial, 0x0, 0x61);
+ } else {
+ pl2303_vendor_write(serial, 0x0, 0x0);
+ }
+
+ kfree(buf);
+}
+
+static void pl2303_dtr_rts(struct usb_serial_port *port, int on)
+{
+ struct pl2303_private *priv = usb_get_serial_port_data(port);
+ unsigned long flags;
+ u8 control;
+
+ spin_lock_irqsave(&priv->lock, flags);
+ if (on)
+ priv->line_control |= (CONTROL_DTR | CONTROL_RTS);
+ else
+ priv->line_control &= ~(CONTROL_DTR | CONTROL_RTS);
+ control = priv->line_control;
+ spin_unlock_irqrestore(&priv->lock, flags);
+
+ pl2303_set_control_lines(port, control);
+}
+
+static void pl2303_close(struct usb_serial_port *port)
+{
+ usb_serial_generic_close(port);
+ usb_kill_urb(port->interrupt_in_urb);
+ pl2303_set_break(port, false);
+}
+
+static int pl2303_open(struct tty_struct *tty, struct usb_serial_port *port)
+{
+ struct usb_serial *serial = port->serial;
+ struct pl2303_serial_private *spriv = usb_get_serial_data(serial);
+ int result;
+
+ if (spriv->quirks & PL2303_QUIRK_LEGACY) {
+ usb_clear_halt(serial->dev, port->write_urb->pipe);
+ usb_clear_halt(serial->dev, port->read_urb->pipe);
+ } else {
+ /* reset upstream data pipes */
+ pl2303_vendor_write(serial, 8, 0);
+ pl2303_vendor_write(serial, 9, 0);
+ }
+
+ /* Setup termios */
+ if (tty)
+ pl2303_set_termios(tty, port, NULL);
+
+ result = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL);
+ if (result) {
+ dev_err(&port->dev, "failed to submit interrupt urb: %d\n",
+ result);
+ return result;
+ }
+
+ result = usb_serial_generic_open(tty, port);
+ if (result) {
+ usb_kill_urb(port->interrupt_in_urb);
+ return result;
+ }
+
+ return 0;
+}
+
+static int pl2303_tiocmset(struct tty_struct *tty,
+ unsigned int set, unsigned int clear)
+{
+ struct usb_serial_port *port = tty->driver_data;
+ struct pl2303_private *priv = usb_get_serial_port_data(port);
+ unsigned long flags;
+ u8 control;
+ int ret;
+
+ spin_lock_irqsave(&priv->lock, flags);
+ if (set & TIOCM_RTS)
+ priv->line_control |= CONTROL_RTS;
+ if (set & TIOCM_DTR)
+ priv->line_control |= CONTROL_DTR;
+ if (clear & TIOCM_RTS)
+ priv->line_control &= ~CONTROL_RTS;
+ if (clear & TIOCM_DTR)
+ priv->line_control &= ~CONTROL_DTR;
+ control = priv->line_control;
+ spin_unlock_irqrestore(&priv->lock, flags);
+
+ ret = pl2303_set_control_lines(port, control);
+ if (ret)
+ return usb_translate_errors(ret);
+
+ return 0;
+}
+
+static int pl2303_tiocmget(struct tty_struct *tty)
+{
+ struct usb_serial_port *port = tty->driver_data;
+ struct pl2303_private *priv = usb_get_serial_port_data(port);
+ unsigned long flags;
+ unsigned int mcr;
+ unsigned int status;
+ unsigned int result;
+
+ spin_lock_irqsave(&priv->lock, flags);
+ mcr = priv->line_control;
+ status = priv->line_status;
+ spin_unlock_irqrestore(&priv->lock, flags);
+
+ result = ((mcr & CONTROL_DTR) ? TIOCM_DTR : 0)
+ | ((mcr & CONTROL_RTS) ? TIOCM_RTS : 0)
+ | ((status & UART_CTS) ? TIOCM_CTS : 0)
+ | ((status & UART_DSR) ? TIOCM_DSR : 0)
+ | ((status & UART_RING) ? TIOCM_RI : 0)
+ | ((status & UART_DCD) ? TIOCM_CD : 0);
+
+ dev_dbg(&port->dev, "%s - result = %x\n", __func__, result);
+
+ return result;
+}
+
+static int pl2303_carrier_raised(struct usb_serial_port *port)
+{
+ struct pl2303_private *priv = usb_get_serial_port_data(port);
+
+ if (priv->line_status & UART_DCD)
+ return 1;
+
+ return 0;
+}
+
+static int pl2303_ioctl(struct tty_struct *tty,
+ unsigned int cmd, unsigned long arg)
+{
+ struct serial_struct ser;
+ struct usb_serial_port *port = tty->driver_data;
+
+ switch (cmd) {
+ case TIOCGSERIAL:
+ memset(&ser, 0, sizeof ser);
+ ser.type = PORT_16654;
+ ser.line = port->minor;
+ ser.port = port->port_number;
+ ser.baud_base = 460800;
+
+ if (copy_to_user((void __user *)arg, &ser, sizeof ser))
+ return -EFAULT;
+
+ return 0;
+ default:
+ break;
+ }
+
+ return -ENOIOCTLCMD;
+}
+
+static void pl2303_set_break(struct usb_serial_port *port, bool enable)
+{
+ struct usb_serial *serial = port->serial;
+ u16 state;
+ int result;
+
+ if (enable)
+ state = BREAK_ON;
+ else
+ state = BREAK_OFF;
+
+ dev_dbg(&port->dev, "%s - turning break %s\n", __func__,
+ state == BREAK_OFF ? "off" : "on");
+
+ result = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
+ BREAK_REQUEST, BREAK_REQUEST_TYPE, state,
+ 0, NULL, 0, 100);
+ if (result)
+ dev_err(&port->dev, "error sending break = %d\n", result);
+}
+
+static void pl2303_break_ctl(struct tty_struct *tty, int state)
+{
+ struct usb_serial_port *port = tty->driver_data;
+
+ pl2303_set_break(port, state);
+}
+
+static void pl2303_update_line_status(struct usb_serial_port *port,
+ unsigned char *data,
+ unsigned int actual_length)
+{
+ struct usb_serial *serial = port->serial;
+ struct pl2303_serial_private *spriv = usb_get_serial_data(serial);
+ struct pl2303_private *priv = usb_get_serial_port_data(port);
+ struct tty_struct *tty;
+ unsigned long flags;
+ unsigned int status_idx = UART_STATE_INDEX;
+ u8 status;
+ u8 delta;
+
+ if (spriv->quirks & PL2303_QUIRK_UART_STATE_IDX0)
+ status_idx = 0;
+
+ if (actual_length < status_idx + 1)
+ return;
+
+ status = data[status_idx];
+
+ /* Save off the uart status for others to look at */
+ spin_lock_irqsave(&priv->lock, flags);
+ delta = priv->line_status ^ status;
+ priv->line_status = status;
+ spin_unlock_irqrestore(&priv->lock, flags);
+
+ if (status & UART_BREAK_ERROR)
+ usb_serial_handle_break(port);
+
+ if (delta & UART_STATE_MSR_MASK) {
+ if (delta & UART_CTS)
+ port->icount.cts++;
+ if (delta & UART_DSR)
+ port->icount.dsr++;
+ if (delta & UART_RING)
+ port->icount.rng++;
+ if (delta & UART_DCD) {
+ port->icount.dcd++;
+ tty = tty_port_tty_get(&port->port);
+ if (tty) {
+ usb_serial_handle_dcd_change(port, tty,
+ status & UART_DCD);
+ tty_kref_put(tty);
+ }
+ }
+
+ wake_up_interruptible(&port->port.delta_msr_wait);
+ }
+}
+
+static void pl2303_read_int_callback(struct urb *urb)
+{
+ struct usb_serial_port *port = urb->context;
+ unsigned char *data = urb->transfer_buffer;
+ unsigned int actual_length = urb->actual_length;
+ int status = urb->status;
+ int retval;
+
+ switch (status) {
+ case 0:
+ /* success */
+ break;
+ case -ECONNRESET:
+ case -ENOENT:
+ case -ESHUTDOWN:
+ /* this urb is terminated, clean up */
+ dev_dbg(&port->dev, "%s - urb shutting down with status: %d\n",
+ __func__, status);
+ return;
+ default:
+ dev_dbg(&port->dev, "%s - nonzero urb status received: %d\n",
+ __func__, status);
+ goto exit;
+ }
+
+ usb_serial_debug_data(&port->dev, __func__,
+ urb->actual_length, urb->transfer_buffer);
+
+ pl2303_update_line_status(port, data, actual_length);
+
+exit:
+ retval = usb_submit_urb(urb, GFP_ATOMIC);
+ if (retval) {
+ dev_err(&port->dev,
+ "%s - usb_submit_urb failed with result %d\n",
+ __func__, retval);
+ }
+}
+
+static void pl2303_process_read_urb(struct urb *urb)
+{
+ struct usb_serial_port *port = urb->context;
+ struct pl2303_private *priv = usb_get_serial_port_data(port);
+ unsigned char *data = urb->transfer_buffer;
+ char tty_flag = TTY_NORMAL;
+ unsigned long flags;
+ u8 line_status;
+ int i;
+
+ /* update line status */
+ spin_lock_irqsave(&priv->lock, flags);
+ line_status = priv->line_status;
+ priv->line_status &= ~UART_STATE_TRANSIENT_MASK;
+ spin_unlock_irqrestore(&priv->lock, flags);
+
+ if (!urb->actual_length)
+ return;
+
+ /*
+ * Break takes precedence over parity, which takes precedence over
+ * framing errors.
+ */
+ if (line_status & UART_BREAK_ERROR)
+ tty_flag = TTY_BREAK;
+ else if (line_status & UART_PARITY_ERROR)
+ tty_flag = TTY_PARITY;
+ else if (line_status & UART_FRAME_ERROR)
+ tty_flag = TTY_FRAME;
+
+ if (tty_flag != TTY_NORMAL)
+ dev_dbg(&port->dev, "%s - tty_flag = %d\n", __func__,
+ tty_flag);
+ /* overrun is special, not associated with a char */
+ if (line_status & UART_OVERRUN_ERROR)
+ tty_insert_flip_char(&port->port, 0, TTY_OVERRUN);
+
+ if (port->port.console && port->sysrq) {
+ for (i = 0; i < urb->actual_length; ++i)
+ if (!usb_serial_handle_sysrq_char(port, data[i]))
+ tty_insert_flip_char(&port->port, data[i],
+ tty_flag);
+ } else {
+ tty_insert_flip_string_fixed_flag(&port->port, data, tty_flag,
+ urb->actual_length);
+ }
+
+ tty_flip_buffer_push(&port->port);
+}
+
+static struct usb_serial_driver pl2303_device = {
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = "pl2303",
+ },
+ .id_table = id_table,
+ .num_ports = 1,
+ .bulk_in_size = 256,
+ .bulk_out_size = 256,
+ .open = pl2303_open,
+ .close = pl2303_close,
+ .dtr_rts = pl2303_dtr_rts,
+ .carrier_raised = pl2303_carrier_raised,
+ .ioctl = pl2303_ioctl,
+ .break_ctl = pl2303_break_ctl,
+ .set_termios = pl2303_set_termios,
+ .tiocmget = pl2303_tiocmget,
+ .tiocmset = pl2303_tiocmset,
+ .tiocmiwait = usb_serial_generic_tiocmiwait,
+ .process_read_urb = pl2303_process_read_urb,
+ .read_int_callback = pl2303_read_int_callback,
+ .probe = pl2303_probe,
+ .attach = pl2303_startup,
+ .release = pl2303_release,
+ .port_probe = pl2303_port_probe,
+ .port_remove = pl2303_port_remove,
+};
+
+static struct usb_serial_driver * const serial_drivers[] = {
+ &pl2303_device, NULL
+};
+
+module_usb_serial_driver(serial_drivers, id_table);
+
+MODULE_DESCRIPTION("Prolific PL2303 USB to serial adaptor driver");
+MODULE_LICENSE("GPL");