1 files changed, 207 insertions, 0 deletions
diff --git a/drivers/usb/storage/usb.h b/drivers/usb/storage/usb.h
new file mode 100644
index 000000000..307e339a9
--- /dev/null
+++ b/drivers/usb/storage/usb.h
@@ -0,0 +1,207 @@
+/* Driver for USB Mass Storage compliant devices
+ * Main Header File
+ *
+ * Current development and maintenance by:
+ *   (c) 1999-2002 Matthew Dharm (mdharm-usb@one-eyed-alien.net)
+ *
+ * Initial work by:
+ *   (c) 1999 Michael Gee (michael@linuxspecific.com)
+ *
+ * This driver is based on the 'USB Mass Storage Class' document. This
+ * describes in detail the protocol used to communicate with such
+ * devices.  Clearly, the designers had SCSI and ATAPI commands in
+ * mind when they created this document.  The commands are all very
+ * similar to commands in the SCSI-II and ATAPI specifications.
+ *
+ * It is important to note that in a number of cases this class
+ * exhibits class-specific exemptions from the USB specification.
+ * Notably the usage of NAK, STALL and ACK differs from the norm, in
+ * that they are used to communicate wait, failed and OK on commands.
+ *
+ * Also, for certain devices, the interrupt endpoint is used to convey
+ * status of a command.
+ *
+ * Please see http://www.one-eyed-alien.net/~mdharm/linux-usb for more
+ * information about this driver.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2, or (at your option) any
+ * later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef _USB_H_
+#define _USB_H_
+
+#include <linux/usb.h>
+#include <linux/usb_usual.h>
+#include <linux/blkdev.h>
+#include <linux/completion.h>
+#include <linux/mutex.h>
+#include <linux/workqueue.h>
+#include <scsi/scsi_host.h>
+
+struct us_data;
+struct scsi_cmnd;
+
+/*
+ * Unusual device list definitions 
+ */
+
+struct us_unusual_dev {
+	const char* vendorName;
+	const char* productName;
+	__u8  useProtocol;
+	__u8  useTransport;
+	int (*initFunction)(struct us_data *);
+};
+
+
+/* Dynamic bitflag definitions (us->dflags): used in set_bit() etc. */
+#define US_FLIDX_URB_ACTIVE	0	/* current_urb is in use    */
+#define US_FLIDX_SG_ACTIVE	1	/* current_sg is in use     */
+#define US_FLIDX_ABORTING	2	/* abort is in progress     */
+#define US_FLIDX_DISCONNECTING	3	/* disconnect in progress   */
+#define US_FLIDX_RESETTING	4	/* device reset in progress */
+#define US_FLIDX_TIMED_OUT	5	/* SCSI midlayer timed out  */
+#define US_FLIDX_SCAN_PENDING	6	/* scanning not yet done    */
+#define US_FLIDX_REDO_READ10	7	/* redo READ(10) command    */
+#define US_FLIDX_READ10_WORKED	8	/* previous READ(10) succeeded */
+
+#define USB_STOR_STRING_LEN 32
+
+/*
+ * We provide a DMA-mapped I/O buffer for use with small USB transfers.
+ * It turns out that CB[I] needs a 12-byte buffer and Bulk-only needs a
+ * 31-byte buffer.  But Freecom needs a 64-byte buffer, so that's the
+ * size we'll allocate.
+ */
+
+#define US_IOBUF_SIZE		64	/* Size of the DMA-mapped I/O buffer */
+#define US_SENSE_SIZE		18	/* Size of the autosense data buffer */
+
+typedef int (*trans_cmnd)(struct scsi_cmnd *, struct us_data*);
+typedef int (*trans_reset)(struct us_data*);
+typedef void (*proto_cmnd)(struct scsi_cmnd*, struct us_data*);
+typedef void (*extra_data_destructor)(void *);	/* extra data destructor */
+typedef void (*pm_hook)(struct us_data *, int);	/* power management hook */
+
+#define US_SUSPEND	0
+#define US_RESUME	1
+
+/* we allocate one of these for every device that we remember */
+struct us_data {
+	/* The device we're working with
+	 * It's important to note:
+	 *    (o) you must hold dev_mutex to change pusb_dev
+	 */
+	struct mutex		dev_mutex;	 /* protect pusb_dev */
+	struct usb_device	*pusb_dev;	 /* this usb_device */
+	struct usb_interface	*pusb_intf;	 /* this interface */
+	struct us_unusual_dev   *unusual_dev;	 /* device-filter entry     */
+	unsigned long		fflags;		 /* fixed flags from filter */
+	unsigned long		dflags;		 /* dynamic atomic bitflags */
+	unsigned int		send_bulk_pipe;	 /* cached pipe values */
+	unsigned int		recv_bulk_pipe;
+	unsigned int		send_ctrl_pipe;
+	unsigned int		recv_ctrl_pipe;
+	unsigned int		recv_intr_pipe;
+
+	/* information about the device */
+	char			*transport_name;
+	char			*protocol_name;
+	__le32			bcs_signature;
+	u8			subclass;
+	u8			protocol;
+	u8			max_lun;
+
+	u8			ifnum;		 /* interface number   */
+	u8			ep_bInterval;	 /* interrupt interval */ 
+
+	/* function pointers for this device */
+	trans_cmnd		transport;	 /* transport function	   */
+	trans_reset		transport_reset; /* transport device reset */
+	proto_cmnd		proto_handler;	 /* protocol handler	   */
+
+	/* SCSI interfaces */
+	struct scsi_cmnd	*srb;		 /* current srb		*/
+	unsigned int		tag;		 /* current dCBWTag	*/
+	char			scsi_name[32];	 /* scsi_host name	*/
+
+	/* control and bulk communications data */
+	struct urb		*current_urb;	 /* USB requests	 */
+	struct usb_ctrlrequest	*cr;		 /* control requests	 */
+	struct usb_sg_request	current_sg;	 /* scatter-gather req.  */
+	unsigned char		*iobuf;		 /* I/O buffer		 */
+	dma_addr_t		iobuf_dma;	 /* buffer DMA addresses */
+	struct task_struct	*ctl_thread;	 /* the control thread   */
+
+	/* mutual exclusion and synchronization structures */
+	struct completion	cmnd_ready;	 /* to sleep thread on	    */
+	struct completion	notify;		 /* thread begin/end	    */
+	wait_queue_head_t	delay_wait;	 /* wait during reset	    */
+	struct delayed_work	scan_dwork;	 /* for async scanning      */
+
+	/* subdriver information */
+	void			*extra;		 /* Any extra data          */
+	extra_data_destructor	extra_destructor;/* extra data destructor   */
+#ifdef CONFIG_PM
+	pm_hook			suspend_resume_hook;
+#endif
+
+	/* hacks for READ CAPACITY bug handling */
+	int			use_last_sector_hacks;
+	int			last_sector_retries;
+};
+
+/* Convert between us_data and the corresponding Scsi_Host */
+static inline struct Scsi_Host *us_to_host(struct us_data *us) {
+	return container_of((void *) us, struct Scsi_Host, hostdata);
+}
+static inline struct us_data *host_to_us(struct Scsi_Host *host) {
+	return (struct us_data *) host->hostdata;
+}
+
+/* Function to fill an inquiry response. See usb.c for details */
+extern void fill_inquiry_response(struct us_data *us,
+	unsigned char *data, unsigned int data_len);
+
+/* The scsi_lock() and scsi_unlock() macros protect the sm_state and the
+ * single queue element srb for write access */
+#define scsi_unlock(host)	spin_unlock_irq(host->host_lock)
+#define scsi_lock(host)		spin_lock_irq(host->host_lock)
+
+/* General routines provided by the usb-storage standard core */
+#ifdef CONFIG_PM
+extern int usb_stor_suspend(struct usb_interface *iface, pm_message_t message);
+extern int usb_stor_resume(struct usb_interface *iface);
+extern int usb_stor_reset_resume(struct usb_interface *iface);
+#else
+#define usb_stor_suspend	NULL
+#define usb_stor_resume		NULL
+#define usb_stor_reset_resume	NULL
+#endif
+
+extern int usb_stor_pre_reset(struct usb_interface *iface);
+extern int usb_stor_post_reset(struct usb_interface *iface);
+
+extern int usb_stor_probe1(struct us_data **pus,
+		struct usb_interface *intf,
+		const struct usb_device_id *id,
+		struct us_unusual_dev *unusual_dev);
+extern int usb_stor_probe2(struct us_data *us);
+extern void usb_stor_disconnect(struct usb_interface *intf);
+
+extern void usb_stor_adjust_quirks(struct usb_device *dev,
+		unsigned long *fflags);
+
+#endif