diff options
Diffstat (limited to 'drivers/usb')
| -rw-r--r-- | drivers/usb/chipidea/ci_hdrc_imx.c | 2 | ||||
| -rw-r--r-- | drivers/usb/chipidea/udc.c | 84 | ||||
| -rw-r--r-- | drivers/usb/core/config.c | 5 | ||||
| -rw-r--r-- | drivers/usb/core/quirks.c | 13 | ||||
| -rw-r--r-- | drivers/usb/host/xhci-mem.c | 17 | ||||
| -rw-r--r-- | drivers/usb/host/xhci-pci.c | 90 | ||||
| -rw-r--r-- | drivers/usb/host/xhci-ring.c | 79 | ||||
| -rw-r--r-- | drivers/usb/host/xhci.c | 29 | ||||
| -rw-r--r-- | drivers/usb/misc/chaoskey.c | 2 | ||||
| -rw-r--r-- | drivers/usb/musb/musb_cppi41.c | 6 | ||||
| -rw-r--r-- | drivers/usb/musb/musb_dsps.c | 7 | ||||
| -rw-r--r-- | drivers/usb/phy/phy-generic.c | 3 | ||||
| -rw-r--r-- | drivers/usb/serial/option.c | 24 | ||||
| -rw-r--r-- | drivers/usb/serial/whiteheat.c | 31 |
14 files changed, 259 insertions, 133 deletions
diff --git a/drivers/usb/chipidea/ci_hdrc_imx.c b/drivers/usb/chipidea/ci_hdrc_imx.c index 389f0e034..fa774323e 100644 --- a/drivers/usb/chipidea/ci_hdrc_imx.c +++ b/drivers/usb/chipidea/ci_hdrc_imx.c @@ -56,7 +56,7 @@ static const struct of_device_id ci_hdrc_imx_dt_ids[] = { { .compatible = "fsl,imx27-usb", .data = &imx27_usb_data}, { .compatible = "fsl,imx6q-usb", .data = &imx6q_usb_data}, { .compatible = "fsl,imx6sl-usb", .data = &imx6sl_usb_data}, - { .compatible = "fsl,imx6sx-usb", .data = &imx6sl_usb_data}, + { .compatible = "fsl,imx6sx-usb", .data = &imx6sx_usb_data}, { /* sentinel */ } }; MODULE_DEVICE_TABLE(of, ci_hdrc_imx_dt_ids); diff --git a/drivers/usb/chipidea/udc.c b/drivers/usb/chipidea/udc.c index 764f668d4..6e53c24fa 100644 --- a/drivers/usb/chipidea/udc.c +++ b/drivers/usb/chipidea/udc.c @@ -656,6 +656,44 @@ __acquires(hwep->lock) return 0; } +static int _ep_set_halt(struct usb_ep *ep, int value, bool check_transfer) +{ + struct ci_hw_ep *hwep = container_of(ep, struct ci_hw_ep, ep); + int direction, retval = 0; + unsigned long flags; + + if (ep == NULL || hwep->ep.desc == NULL) + return -EINVAL; + + if (usb_endpoint_xfer_isoc(hwep->ep.desc)) + return -EOPNOTSUPP; + + spin_lock_irqsave(hwep->lock, flags); + + if (value && hwep->dir == TX && check_transfer && + !list_empty(&hwep->qh.queue) && + !usb_endpoint_xfer_control(hwep->ep.desc)) { + spin_unlock_irqrestore(hwep->lock, flags); + return -EAGAIN; + } + + direction = hwep->dir; + do { + retval |= hw_ep_set_halt(hwep->ci, hwep->num, hwep->dir, value); + + if (!value) + hwep->wedge = 0; + + if (hwep->type == USB_ENDPOINT_XFER_CONTROL) + hwep->dir = (hwep->dir == TX) ? RX : TX; + + } while (hwep->dir != direction); + + spin_unlock_irqrestore(hwep->lock, flags); + return retval; +} + + /** * _gadget_stop_activity: stops all USB activity, flushes & disables all endpts * @gadget: gadget @@ -1051,7 +1089,7 @@ __acquires(ci->lock) num += ci->hw_ep_max / 2; spin_unlock(&ci->lock); - err = usb_ep_set_halt(&ci->ci_hw_ep[num].ep); + err = _ep_set_halt(&ci->ci_hw_ep[num].ep, 1, false); spin_lock(&ci->lock); if (!err) isr_setup_status_phase(ci); @@ -1110,8 +1148,8 @@ delegate: if (err < 0) { spin_unlock(&ci->lock); - if (usb_ep_set_halt(&hwep->ep)) - dev_err(ci->dev, "error: ep_set_halt\n"); + if (_ep_set_halt(&hwep->ep, 1, false)) + dev_err(ci->dev, "error: _ep_set_halt\n"); spin_lock(&ci->lock); } } @@ -1142,9 +1180,9 @@ __acquires(ci->lock) err = isr_setup_status_phase(ci); if (err < 0) { spin_unlock(&ci->lock); - if (usb_ep_set_halt(&hwep->ep)) + if (_ep_set_halt(&hwep->ep, 1, false)) dev_err(ci->dev, - "error: ep_set_halt\n"); + "error: _ep_set_halt\n"); spin_lock(&ci->lock); } } @@ -1390,41 +1428,7 @@ static int ep_dequeue(struct usb_ep *ep, struct usb_request *req) */ static int ep_set_halt(struct usb_ep *ep, int value) { - struct ci_hw_ep *hwep = container_of(ep, struct ci_hw_ep, ep); - int direction, retval = 0; - unsigned long flags; - - if (ep == NULL || hwep->ep.desc == NULL) - return -EINVAL; - - if (usb_endpoint_xfer_isoc(hwep->ep.desc)) - return -EOPNOTSUPP; - - spin_lock_irqsave(hwep->lock, flags); - -#ifndef STALL_IN - /* g_file_storage MS compliant but g_zero fails chapter 9 compliance */ - if (value && hwep->type == USB_ENDPOINT_XFER_BULK && hwep->dir == TX && - !list_empty(&hwep->qh.queue)) { - spin_unlock_irqrestore(hwep->lock, flags); - return -EAGAIN; - } -#endif - - direction = hwep->dir; - do { - retval |= hw_ep_set_halt(hwep->ci, hwep->num, hwep->dir, value); - - if (!value) - hwep->wedge = 0; - - if (hwep->type == USB_ENDPOINT_XFER_CONTROL) - hwep->dir = (hwep->dir == TX) ? RX : TX; - - } while (hwep->dir != direction); - - spin_unlock_irqrestore(hwep->lock, flags); - return retval; + return _ep_set_halt(ep, value, true); } /** diff --git a/drivers/usb/core/config.c b/drivers/usb/core/config.c index b2a540b43..b9ddf0c1f 100644 --- a/drivers/usb/core/config.c +++ b/drivers/usb/core/config.c @@ -112,7 +112,7 @@ static void usb_parse_ss_endpoint_companion(struct device *ddev, int cfgno, cfgno, inum, asnum, ep->desc.bEndpointAddress); ep->ss_ep_comp.bmAttributes = 16; } else if (usb_endpoint_xfer_isoc(&ep->desc) && - desc->bmAttributes > 2) { + USB_SS_MULT(desc->bmAttributes) > 3) { dev_warn(ddev, "Isoc endpoint has Mult of %d in " "config %d interface %d altsetting %d ep %d: " "setting to 3\n", desc->bmAttributes + 1, @@ -121,7 +121,8 @@ static void usb_parse_ss_endpoint_companion(struct device *ddev, int cfgno, } if (usb_endpoint_xfer_isoc(&ep->desc)) - max_tx = (desc->bMaxBurst + 1) * (desc->bmAttributes + 1) * + max_tx = (desc->bMaxBurst + 1) * + (USB_SS_MULT(desc->bmAttributes)) * usb_endpoint_maxp(&ep->desc); else if (usb_endpoint_xfer_int(&ep->desc)) max_tx = usb_endpoint_maxp(&ep->desc) * diff --git a/drivers/usb/core/quirks.c b/drivers/usb/core/quirks.c index d85abfed8..f5a381945 100644 --- a/drivers/usb/core/quirks.c +++ b/drivers/usb/core/quirks.c @@ -54,6 +54,13 @@ static const struct usb_device_id usb_quirk_list[] = { { USB_DEVICE(0x046d, 0x082d), .driver_info = USB_QUIRK_DELAY_INIT }, { USB_DEVICE(0x046d, 0x0843), .driver_info = USB_QUIRK_DELAY_INIT }, + /* Logitech ConferenceCam CC3000e */ + { USB_DEVICE(0x046d, 0x0847), .driver_info = USB_QUIRK_DELAY_INIT }, + { USB_DEVICE(0x046d, 0x0848), .driver_info = USB_QUIRK_DELAY_INIT }, + + /* Logitech PTZ Pro Camera */ + { USB_DEVICE(0x046d, 0x0853), .driver_info = USB_QUIRK_DELAY_INIT }, + /* Logitech Quickcam Fusion */ { USB_DEVICE(0x046d, 0x08c1), .driver_info = USB_QUIRK_RESET_RESUME }, @@ -78,6 +85,12 @@ static const struct usb_device_id usb_quirk_list[] = { /* Philips PSC805 audio device */ { USB_DEVICE(0x0471, 0x0155), .driver_info = USB_QUIRK_RESET_RESUME }, + /* Plantronic Audio 655 DSP */ + { USB_DEVICE(0x047f, 0xc008), .driver_info = USB_QUIRK_RESET_RESUME }, + + /* Plantronic Audio 648 USB */ + { USB_DEVICE(0x047f, 0xc013), .driver_info = USB_QUIRK_RESET_RESUME }, + /* Artisman Watchdog Dongle */ { USB_DEVICE(0x04b4, 0x0526), .driver_info = USB_QUIRK_CONFIG_INTF_STRINGS }, diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c index 9a8c936cd..41f841fa6 100644 --- a/drivers/usb/host/xhci-mem.c +++ b/drivers/usb/host/xhci-mem.c @@ -1498,10 +1498,10 @@ int xhci_endpoint_init(struct xhci_hcd *xhci, * use Event Data TRBs, and we don't chain in a link TRB on short * transfers, we're basically dividing by 1. * - * xHCI 1.0 specification indicates that the Average TRB Length should - * be set to 8 for control endpoints. + * xHCI 1.0 and 1.1 specification indicates that the Average TRB Length + * should be set to 8 for control endpoints. */ - if (usb_endpoint_xfer_control(&ep->desc) && xhci->hci_version == 0x100) + if (usb_endpoint_xfer_control(&ep->desc) && xhci->hci_version >= 0x100) ep_ctx->tx_info |= cpu_to_le32(AVG_TRB_LENGTH_FOR_EP(8)); else ep_ctx->tx_info |= @@ -1792,8 +1792,7 @@ void xhci_mem_cleanup(struct xhci_hcd *xhci) int size; int i, j, num_ports; - if (timer_pending(&xhci->cmd_timer)) - del_timer_sync(&xhci->cmd_timer); + del_timer_sync(&xhci->cmd_timer); /* Free the Event Ring Segment Table and the actual Event Ring */ size = sizeof(struct xhci_erst_entry)*(xhci->erst.num_entries); @@ -2321,6 +2320,10 @@ int xhci_mem_init(struct xhci_hcd *xhci, gfp_t flags) INIT_LIST_HEAD(&xhci->cmd_list); + /* init command timeout timer */ + setup_timer(&xhci->cmd_timer, xhci_handle_command_timeout, + (unsigned long)xhci); + page_size = readl(&xhci->op_regs->page_size); xhci_dbg_trace(xhci, trace_xhci_dbg_init, "Supported page size register = 0x%x", page_size); @@ -2505,10 +2508,6 @@ int xhci_mem_init(struct xhci_hcd *xhci, gfp_t flags) "Wrote ERST address to ir_set 0."); xhci_print_ir_set(xhci, 0); - /* init command timeout timer */ - setup_timer(&xhci->cmd_timer, xhci_handle_command_timeout, - (unsigned long)xhci); - /* * XXX: Might need to set the Interrupter Moderation Register to * something other than the default (~1ms minimum between interrupts). diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c index 5590eac2b..c79d33676 100644 --- a/drivers/usb/host/xhci-pci.c +++ b/drivers/usb/host/xhci-pci.c @@ -180,51 +180,6 @@ static void xhci_pci_quirks(struct device *dev, struct xhci_hcd *xhci) "QUIRK: Resetting on resume"); } -/* - * In some Intel xHCI controllers, in order to get D3 working, - * through a vendor specific SSIC CONFIG register at offset 0x883c, - * SSIC PORT need to be marked as "unused" before putting xHCI - * into D3. After D3 exit, the SSIC port need to be marked as "used". - * Without this change, xHCI might not enter D3 state. - * Make sure PME works on some Intel xHCI controllers by writing 1 to clear - * the Internal PME flag bit in vendor specific PMCTRL register at offset 0x80a4 - */ -static void xhci_pme_quirk(struct usb_hcd *hcd, bool suspend) -{ - struct xhci_hcd *xhci = hcd_to_xhci(hcd); - struct pci_dev *pdev = to_pci_dev(hcd->self.controller); - u32 val; - void __iomem *reg; - - if (pdev->vendor == PCI_VENDOR_ID_INTEL && - pdev->device == PCI_DEVICE_ID_INTEL_CHERRYVIEW_XHCI) { - - reg = (void __iomem *) xhci->cap_regs + PORT2_SSIC_CONFIG_REG2; - - /* Notify SSIC that SSIC profile programming is not done */ - val = readl(reg) & ~PROG_DONE; - writel(val, reg); - - /* Mark SSIC port as unused(suspend) or used(resume) */ - val = readl(reg); - if (suspend) - val |= SSIC_PORT_UNUSED; - else - val &= ~SSIC_PORT_UNUSED; - writel(val, reg); - - /* Notify SSIC that SSIC profile programming is done */ - val = readl(reg) | PROG_DONE; - writel(val, reg); - readl(reg); - } - - reg = (void __iomem *) xhci->cap_regs + 0x80a4; - val = readl(reg); - writel(val | BIT(28), reg); - readl(reg); -} - #ifdef CONFIG_ACPI static void xhci_pme_acpi_rtd3_enable(struct pci_dev *dev) { @@ -345,6 +300,51 @@ static void xhci_pci_remove(struct pci_dev *dev) } #ifdef CONFIG_PM +/* + * In some Intel xHCI controllers, in order to get D3 working, + * through a vendor specific SSIC CONFIG register at offset 0x883c, + * SSIC PORT need to be marked as "unused" before putting xHCI + * into D3. After D3 exit, the SSIC port need to be marked as "used". + * Without this change, xHCI might not enter D3 state. + * Make sure PME works on some Intel xHCI controllers by writing 1 to clear + * the Internal PME flag bit in vendor specific PMCTRL register at offset 0x80a4 + */ +static void xhci_pme_quirk(struct usb_hcd *hcd, bool suspend) +{ + struct xhci_hcd *xhci = hcd_to_xhci(hcd); + struct pci_dev *pdev = to_pci_dev(hcd->self.controller); + u32 val; + void __iomem *reg; + + if (pdev->vendor == PCI_VENDOR_ID_INTEL && + pdev->device == PCI_DEVICE_ID_INTEL_CHERRYVIEW_XHCI) { + + reg = (void __iomem *) xhci->cap_regs + PORT2_SSIC_CONFIG_REG2; + + /* Notify SSIC that SSIC profile programming is not done */ + val = readl(reg) & ~PROG_DONE; + writel(val, reg); + + /* Mark SSIC port as unused(suspend) or used(resume) */ + val = readl(reg); + if (suspend) + val |= SSIC_PORT_UNUSED; + else + val &= ~SSIC_PORT_UNUSED; + writel(val, reg); + + /* Notify SSIC that SSIC profile programming is done */ + val = readl(reg) | PROG_DONE; + writel(val, reg); + readl(reg); + } + + reg = (void __iomem *) xhci->cap_regs + 0x80a4; + val = readl(reg); + writel(val | BIT(28), reg); + readl(reg); +} + static int xhci_pci_suspend(struct usb_hcd *hcd, bool do_wakeup) { struct xhci_hcd *xhci = hcd_to_xhci(hcd); diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c index 32f4d5644..8aadf3def 100644 --- a/drivers/usb/host/xhci-ring.c +++ b/drivers/usb/host/xhci-ring.c @@ -302,6 +302,15 @@ static int xhci_abort_cmd_ring(struct xhci_hcd *xhci) ret = xhci_handshake(&xhci->op_regs->cmd_ring, CMD_RING_RUNNING, 0, 5 * 1000 * 1000); if (ret < 0) { + /* we are about to kill xhci, give it one more chance */ + xhci_write_64(xhci, temp_64 | CMD_RING_ABORT, + &xhci->op_regs->cmd_ring); + udelay(1000); + ret = xhci_handshake(&xhci->op_regs->cmd_ring, + CMD_RING_RUNNING, 0, 3 * 1000 * 1000); + if (ret == 0) + return 0; + xhci_err(xhci, "Stopped the command ring failed, " "maybe the host is dead\n"); xhci->xhc_state |= XHCI_STATE_DYING; @@ -3041,9 +3050,11 @@ static int queue_bulk_sg_tx(struct xhci_hcd *xhci, gfp_t mem_flags, struct xhci_td *td; struct scatterlist *sg; int num_sgs; - int trb_buff_len, this_sg_len, running_total; + int trb_buff_len, this_sg_len, running_total, ret; unsigned int total_packet_count; + bool zero_length_needed; bool first_trb; + int last_trb_num; u64 addr; bool more_trbs_coming; @@ -3059,13 +3070,27 @@ static int queue_bulk_sg_tx(struct xhci_hcd *xhci, gfp_t mem_flags, total_packet_count = DIV_ROUND_UP(urb->transfer_buffer_length, usb_endpoint_maxp(&urb->ep->desc)); - trb_buff_len = prepare_transfer(xhci, xhci->devs[slot_id], + ret = prepare_transfer(xhci, xhci->devs[slot_id], ep_index, urb->stream_id, num_trbs, urb, 0, mem_flags); - if (trb_buff_len < 0) - return trb_buff_len; + if (ret < 0) + return ret; urb_priv = urb->hcpriv; + + /* Deal with URB_ZERO_PACKET - need one more td/trb */ + zero_length_needed = urb->transfer_flags & URB_ZERO_PACKET && + urb_priv->length == 2; + if (zero_length_needed) { + num_trbs++; + xhci_dbg(xhci, "Creating zero length td.\n"); + ret = prepare_transfer(xhci, xhci->devs[slot_id], + ep_index, urb->stream_id, + 1, urb, 1, mem_flags); + if (ret < 0) + return ret; + } + td = urb_priv->td[0]; /* @@ -3095,6 +3120,7 @@ static int queue_bulk_sg_tx(struct xhci_hcd *xhci, gfp_t mem_flags, trb_buff_len = urb->transfer_buffer_length; first_trb = true; + last_trb_num = zero_length_needed ? 2 : 1; /* Queue the first TRB, even if it's zero-length */ do { u32 field = 0; @@ -3112,12 +3138,15 @@ static int queue_bulk_sg_tx(struct xhci_hcd *xhci, gfp_t mem_flags, /* Chain all the TRBs together; clear the chain bit in the last * TRB to indicate it's the last TRB in the chain. */ - if (num_trbs > 1) { + if (num_trbs > last_trb_num) { field |= TRB_CHAIN; - } else { - /* FIXME - add check for ZERO_PACKET flag before this */ + } else if (num_trbs == last_trb_num) { td->last_trb = ep_ring->enqueue; field |= TRB_IOC; + } else if (zero_length_needed && num_trbs == 1) { + trb_buff_len = 0; + urb_priv->td[1]->last_trb = ep_ring->enqueue; + field |= TRB_IOC; } /* Only set interrupt on short packet for IN endpoints */ @@ -3179,7 +3208,7 @@ static int queue_bulk_sg_tx(struct xhci_hcd *xhci, gfp_t mem_flags, if (running_total + trb_buff_len > urb->transfer_buffer_length) trb_buff_len = urb->transfer_buffer_length - running_total; - } while (running_total < urb->transfer_buffer_length); + } while (num_trbs > 0); check_trb_math(urb, num_trbs, running_total); giveback_first_trb(xhci, slot_id, ep_index, urb->stream_id, @@ -3197,7 +3226,9 @@ int xhci_queue_bulk_tx(struct xhci_hcd *xhci, gfp_t mem_flags, int num_trbs; struct xhci_generic_trb *start_trb; bool first_trb; + int last_trb_num; bool more_trbs_coming; + bool zero_length_needed; int start_cycle; u32 field, length_field; @@ -3228,7 +3259,6 @@ int xhci_queue_bulk_tx(struct xhci_hcd *xhci, gfp_t mem_flags, num_trbs++; running_total += TRB_MAX_BUFF_SIZE; } - /* FIXME: this doesn't deal with URB_ZERO_PACKET - need one more */ ret = prepare_transfer(xhci, xhci->devs[slot_id], ep_index, urb->stream_id, @@ -3237,6 +3267,20 @@ int xhci_queue_bulk_tx(struct xhci_hcd *xhci, gfp_t mem_flags, return ret; urb_priv = urb->hcpriv; + + /* Deal with URB_ZERO_PACKET - need one more td/trb */ + zero_length_needed = urb->transfer_flags & URB_ZERO_PACKET && + urb_priv->length == 2; + if (zero_length_needed) { + num_trbs++; + xhci_dbg(xhci, "Creating zero length td.\n"); + ret = prepare_transfer(xhci, xhci->devs[slot_id], + ep_index, urb->stream_id, + 1, urb, 1, mem_flags); + if (ret < 0) + return ret; + } + td = urb_priv->td[0]; /* @@ -3258,7 +3302,7 @@ int xhci_queue_bulk_tx(struct xhci_hcd *xhci, gfp_t mem_flags, trb_buff_len = urb->transfer_buffer_length; first_trb = true; - + last_trb_num = zero_length_needed ? 2 : 1; /* Queue the first TRB, even if it's zero-length */ do { u32 remainder = 0; @@ -3275,12 +3319,15 @@ int xhci_queue_bulk_tx(struct xhci_hcd *xhci, gfp_t mem_flags, /* Chain all the TRBs together; clear the chain bit in the last * TRB to indicate it's the last TRB in the chain. */ - if (num_trbs > 1) { + if (num_trbs > last_trb_num) { field |= TRB_CHAIN; - } else { - /* FIXME - add check for ZERO_PACKET flag before this */ + } else if (num_trbs == last_trb_num) { td->last_trb = ep_ring->enqueue; field |= TRB_IOC; + } else if (zero_length_needed && num_trbs == 1) { + trb_buff_len = 0; + urb_priv->td[1]->last_trb = ep_ring->enqueue; + field |= TRB_IOC; } /* Only set interrupt on short packet for IN endpoints */ @@ -3318,7 +3365,7 @@ int xhci_queue_bulk_tx(struct xhci_hcd *xhci, gfp_t mem_flags, trb_buff_len = urb->transfer_buffer_length - running_total; if (trb_buff_len > TRB_MAX_BUFF_SIZE) trb_buff_len = TRB_MAX_BUFF_SIZE; - } while (running_total < urb->transfer_buffer_length); + } while (num_trbs > 0); check_trb_math(urb, num_trbs, running_total); giveback_first_trb(xhci, slot_id, ep_index, urb->stream_id, @@ -3385,8 +3432,8 @@ int xhci_queue_ctrl_tx(struct xhci_hcd *xhci, gfp_t mem_flags, if (start_cycle == 0) field |= 0x1; - /* xHCI 1.0 6.4.1.2.1: Transfer Type field */ - if (xhci->hci_version == 0x100) { + /* xHCI 1.0/1.1 6.4.1.2.1: Transfer Type field */ + if (xhci->hci_version >= 0x100) { if (urb->transfer_buffer_length > 0) { if (setup->bRequestType & USB_DIR_IN) field |= TRB_TX_TYPE(TRB_DATA_IN); diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c index 526ebc0c7..d7b9f484d 100644 --- a/drivers/usb/host/xhci.c +++ b/drivers/usb/host/xhci.c @@ -146,7 +146,8 @@ static int xhci_start(struct xhci_hcd *xhci) "waited %u microseconds.\n", XHCI_MAX_HALT_USEC); if (!ret) - xhci->xhc_state &= ~XHCI_STATE_HALTED; + xhci->xhc_state &= ~(XHCI_STATE_HALTED | XHCI_STATE_DYING); + return ret; } @@ -654,15 +655,6 @@ int xhci_run(struct usb_hcd *hcd) } EXPORT_SYMBOL_GPL(xhci_run); -static void xhci_only_stop_hcd(struct usb_hcd *hcd) -{ - struct xhci_hcd *xhci = hcd_to_xhci(hcd); - - spin_lock_irq(&xhci->lock); - xhci_halt(xhci); - spin_unlock_irq(&xhci->lock); -} - /* * Stop xHCI driver. * @@ -677,12 +669,14 @@ void xhci_stop(struct usb_hcd *hcd) u32 temp; struct xhci_hcd *xhci = hcd_to_xhci(hcd); - if (!usb_hcd_is_primary_hcd(hcd)) { - xhci_only_stop_hcd(xhci->shared_hcd); + if (xhci->xhc_state & XHCI_STATE_HALTED) return; - } + mutex_lock(&xhci->mutex); spin_lock_irq(&xhci->lock); + xhci->xhc_state |= XHCI_STATE_HALTED; + xhci->cmd_ring_state = CMD_RING_STATE_STOPPED; + /* Make sure the xHC is halted for a USB3 roothub * (xhci_stop() could be called as part of failed init). */ @@ -717,6 +711,7 @@ void xhci_stop(struct usb_hcd *hcd) xhci_dbg_trace(xhci, trace_xhci_dbg_init, "xhci_stop completed - status = %x", readl(&xhci->op_regs->status)); + mutex_unlock(&xhci->mutex); } /* @@ -1340,6 +1335,11 @@ int xhci_urb_enqueue(struct usb_hcd *hcd, struct urb *urb, gfp_t mem_flags) if (usb_endpoint_xfer_isoc(&urb->ep->desc)) size = urb->number_of_packets; + else if (usb_endpoint_is_bulk_out(&urb->ep->desc) && + urb->transfer_buffer_length > 0 && + urb->transfer_flags & URB_ZERO_PACKET && + !(urb->transfer_buffer_length % usb_endpoint_maxp(&urb->ep->desc))) + size = 2; else size = 1; @@ -3788,6 +3788,9 @@ static int xhci_setup_device(struct usb_hcd *hcd, struct usb_device *udev, mutex_lock(&xhci->mutex); + if (xhci->xhc_state) /* dying or halted */ + goto out; + if (!udev->slot_id) { xhci_dbg_trace(xhci, trace_xhci_dbg_address, "Bad Slot ID %d", udev->slot_id); diff --git a/drivers/usb/misc/chaoskey.c b/drivers/usb/misc/chaoskey.c index 3ad5d19e4..23c794813 100644 --- a/drivers/usb/misc/chaoskey.c +++ b/drivers/usb/misc/chaoskey.c @@ -472,7 +472,7 @@ static int chaoskey_rng_read(struct hwrng *rng, void *data, if (this_time > max) this_time = max; - memcpy(data, dev->buf, this_time); + memcpy(data, dev->buf + dev->used, this_time); dev->used += this_time; diff --git a/drivers/usb/musb/musb_cppi41.c b/drivers/usb/musb/musb_cppi41.c index 4d1b44c23..d07cafb7d 100644 --- a/drivers/usb/musb/musb_cppi41.c +++ b/drivers/usb/musb/musb_cppi41.c @@ -614,7 +614,7 @@ static int cppi41_dma_controller_start(struct cppi41_dma_controller *controller) { struct musb *musb = controller->musb; struct device *dev = musb->controller; - struct device_node *np = dev->of_node; + struct device_node *np = dev->parent->of_node; struct cppi41_dma_channel *cppi41_channel; int count; int i; @@ -664,7 +664,7 @@ static int cppi41_dma_controller_start(struct cppi41_dma_controller *controller) musb_dma->status = MUSB_DMA_STATUS_FREE; musb_dma->max_len = SZ_4M; - dc = dma_request_slave_channel(dev, str); + dc = dma_request_slave_channel(dev->parent, str); if (!dc) { dev_err(dev, "Failed to request %s.\n", str); ret = -EPROBE_DEFER; @@ -695,7 +695,7 @@ cppi41_dma_controller_create(struct musb *musb, void __iomem *base) struct cppi41_dma_controller *controller; int ret = 0; - if (!musb->controller->of_node) { + if (!musb->controller->parent->of_node) { dev_err(musb->controller, "Need DT for the DMA engine.\n"); return NULL; } diff --git a/drivers/usb/musb/musb_dsps.c b/drivers/usb/musb/musb_dsps.c index 1334a3de3..67325ec94 100644 --- a/drivers/usb/musb/musb_dsps.c +++ b/drivers/usb/musb/musb_dsps.c @@ -225,8 +225,11 @@ static void dsps_musb_enable(struct musb *musb) dsps_writel(reg_base, wrp->epintr_set, epmask); dsps_writel(reg_base, wrp->coreintr_set, coremask); - /* start polling for ID change. */ - mod_timer(&glue->timer, jiffies + msecs_to_jiffies(wrp->poll_timeout)); + /* start polling for ID change in dual-role idle mode */ + if (musb->xceiv->otg->state == OTG_STATE_B_IDLE && + musb->port_mode == MUSB_PORT_MODE_DUAL_ROLE) + mod_timer(&glue->timer, jiffies + + msecs_to_jiffies(wrp->poll_timeout)); dsps_musb_try_idle(musb, 0); } diff --git a/drivers/usb/phy/phy-generic.c b/drivers/usb/phy/phy-generic.c index deee68eaf..0cd85f2cc 100644 --- a/drivers/usb/phy/phy-generic.c +++ b/drivers/usb/phy/phy-generic.c @@ -230,7 +230,8 @@ int usb_phy_gen_create_phy(struct device *dev, struct usb_phy_generic *nop, clk_rate = pdata->clk_rate; needs_vcc = pdata->needs_vcc; if (gpio_is_valid(pdata->gpio_reset)) { - err = devm_gpio_request_one(dev, pdata->gpio_reset, 0, + err = devm_gpio_request_one(dev, pdata->gpio_reset, + GPIOF_ACTIVE_LOW, dev_name(dev)); if (!err) nop->gpiod_reset = diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index 876423b88..7c8eb4c4c 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -278,6 +278,10 @@ static void option_instat_callback(struct urb *urb); #define ZTE_PRODUCT_MF622 0x0001 #define ZTE_PRODUCT_MF628 0x0015 #define ZTE_PRODUCT_MF626 0x0031 +#define ZTE_PRODUCT_ZM8620_X 0x0396 +#define ZTE_PRODUCT_ME3620_MBIM 0x0426 +#define ZTE_PRODUCT_ME3620_X 0x1432 +#define ZTE_PRODUCT_ME3620_L 0x1433 #define ZTE_PRODUCT_AC2726 0xfff1 #define ZTE_PRODUCT_MG880 0xfffd #define ZTE_PRODUCT_CDMA_TECH 0xfffe @@ -544,6 +548,18 @@ static const struct option_blacklist_info zte_mc2716_z_blacklist = { .sendsetup = BIT(1) | BIT(2) | BIT(3), }; +static const struct option_blacklist_info zte_me3620_mbim_blacklist = { + .reserved = BIT(2) | BIT(3) | BIT(4), +}; + +static const struct option_blacklist_info zte_me3620_xl_blacklist = { + .reserved = BIT(3) | BIT(4) | BIT(5), +}; + +static const struct option_blacklist_info zte_zm8620_x_blacklist = { + .reserved = BIT(3) | BIT(4) | BIT(5), +}; + static const struct option_blacklist_info huawei_cdc12_blacklist = { .reserved = BIT(1) | BIT(2), }; @@ -1591,6 +1607,14 @@ static const struct usb_device_id option_ids[] = { .driver_info = (kernel_ulong_t)&zte_ad3812_z_blacklist }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_MC2716, 0xff, 0xff, 0xff), .driver_info = (kernel_ulong_t)&zte_mc2716_z_blacklist }, + { USB_DEVICE(ZTE_VENDOR_ID, ZTE_PRODUCT_ME3620_L), + .driver_info = (kernel_ulong_t)&zte_me3620_xl_blacklist }, + { USB_DEVICE(ZTE_VENDOR_ID, ZTE_PRODUCT_ME3620_MBIM), + .driver_info = (kernel_ulong_t)&zte_me3620_mbim_blacklist }, + { USB_DEVICE(ZTE_VENDOR_ID, ZTE_PRODUCT_ME3620_X), + .driver_info = (kernel_ulong_t)&zte_me3620_xl_blacklist }, + { USB_DEVICE(ZTE_VENDOR_ID, ZTE_PRODUCT_ZM8620_X), + .driver_info = (kernel_ulong_t)&zte_zm8620_x_blacklist }, { USB_VENDOR_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff, 0x02, 0x01) }, { USB_VENDOR_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff, 0x02, 0x05) }, { USB_VENDOR_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff, 0x86, 0x10) }, diff --git a/drivers/usb/serial/whiteheat.c b/drivers/usb/serial/whiteheat.c index b93131d8c..59cb91b2e 100644 --- a/drivers/usb/serial/whiteheat.c +++ b/drivers/usb/serial/whiteheat.c @@ -80,6 +80,8 @@ static int whiteheat_firmware_download(struct usb_serial *serial, static int whiteheat_firmware_attach(struct usb_serial *serial); /* function prototypes for the Connect Tech WhiteHEAT serial converter */ +static int whiteheat_probe(struct usb_serial *serial, + const struct usb_device_id *id); static int whiteheat_attach(struct usb_serial *serial); static void whiteheat_release(struct usb_serial *serial); static int whiteheat_port_probe(struct usb_serial_port *port); @@ -116,6 +118,7 @@ static struct usb_serial_driver whiteheat_device = { .description = "Connect Tech - WhiteHEAT", .id_table = id_table_std, .num_ports = 4, + .probe = whiteheat_probe, .attach = whiteheat_attach, .release = whiteheat_release, .port_probe = whiteheat_port_probe, @@ -217,6 +220,34 @@ static int whiteheat_firmware_attach(struct usb_serial *serial) /***************************************************************************** * Connect Tech's White Heat serial driver functions *****************************************************************************/ + +static int whiteheat_probe(struct usb_serial *serial, + const struct usb_device_id *id) +{ + struct usb_host_interface *iface_desc; + struct usb_endpoint_descriptor *endpoint; + size_t num_bulk_in = 0; + size_t num_bulk_out = 0; + size_t min_num_bulk; + unsigned int i; + + iface_desc = serial->interface->cur_altsetting; + + for (i = 0; i < iface_desc->desc.bNumEndpoints; i++) { + endpoint = &iface_desc->endpoint[i].desc; + if (usb_endpoint_is_bulk_in(endpoint)) + ++num_bulk_in; + if (usb_endpoint_is_bulk_out(endpoint)) + ++num_bulk_out; + } + + min_num_bulk = COMMAND_PORT + 1; + if (num_bulk_in < min_num_bulk || num_bulk_out < min_num_bulk) + return -ENODEV; + + return 0; +} + static int whiteheat_attach(struct usb_serial *serial) { struct usb_serial_port *command_port; |