summaryrefslogtreecommitdiff
path: root/drivers/uwb
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/uwb')
-rw-r--r--drivers/uwb/Kconfig70
-rw-r--r--drivers/uwb/Makefile31
-rw-r--r--drivers/uwb/address.c372
-rw-r--r--drivers/uwb/allocator.c385
-rw-r--r--drivers/uwb/beacon.c609
-rw-r--r--drivers/uwb/driver.c156
-rw-r--r--drivers/uwb/drp-avail.c290
-rw-r--r--drivers/uwb/drp-ie.c318
-rw-r--r--drivers/uwb/drp.c855
-rw-r--r--drivers/uwb/est.c464
-rw-r--r--drivers/uwb/hwa-rc.c942
-rw-r--r--drivers/uwb/i1480/Makefile1
-rw-r--r--drivers/uwb/i1480/dfu/Makefile9
-rw-r--r--drivers/uwb/i1480/dfu/dfu.c212
-rw-r--r--drivers/uwb/i1480/dfu/i1480-dfu.h260
-rw-r--r--drivers/uwb/i1480/dfu/mac.c510
-rw-r--r--drivers/uwb/i1480/dfu/phy.c203
-rw-r--r--drivers/uwb/i1480/dfu/usb.c456
-rw-r--r--drivers/uwb/i1480/i1480-est.c99
-rw-r--r--drivers/uwb/ie-rcv.c53
-rw-r--r--drivers/uwb/ie.c380
-rw-r--r--drivers/uwb/lc-dev.c471
-rw-r--r--drivers/uwb/lc-rc.c573
-rw-r--r--drivers/uwb/neh.c622
-rw-r--r--drivers/uwb/pal.c137
-rw-r--r--drivers/uwb/radio.c207
-rw-r--r--drivers/uwb/reset.c393
-rw-r--r--drivers/uwb/rsv.c1015
-rw-r--r--drivers/uwb/scan.c135
-rw-r--r--drivers/uwb/umc-bus.c212
-rw-r--r--drivers/uwb/umc-dev.c95
-rw-r--r--drivers/uwb/umc-drv.c32
-rw-r--r--drivers/uwb/uwb-debug.c393
-rw-r--r--drivers/uwb/uwb-internal.h379
-rw-r--r--drivers/uwb/uwbd.c367
-rw-r--r--drivers/uwb/whc-rc.c481
-rw-r--r--drivers/uwb/whci.c258
37 files changed, 12445 insertions, 0 deletions
diff --git a/drivers/uwb/Kconfig b/drivers/uwb/Kconfig
new file mode 100644
index 000000000..c204094e1
--- /dev/null
+++ b/drivers/uwb/Kconfig
@@ -0,0 +1,70 @@
+#
+# UWB device configuration
+#
+
+menuconfig UWB
+ tristate "Ultra Wideband devices"
+ default n
+ help
+ UWB is a high-bandwidth, low-power, point-to-point radio
+ technology using a wide spectrum (3.1-10.6GHz). It is
+ optimized for in-room use (480Mbps at 2 meters, 110Mbps at
+ 10m). It serves as the transport layer for other protocols,
+ such as Wireless USB (WUSB).
+
+ The topology is peer to peer; however, higher level
+ protocols (such as WUSB) might impose a master/slave
+ relationship.
+
+ Say Y here if your computer has UWB radio controllers (USB or PCI)
+ based. You will need to enable the radio controllers
+ below. It is ok to select all of them, no harm done.
+
+ For more help check the UWB and WUSB related files in
+ <file:Documentation/usb/>.
+
+ To compile the UWB stack as a module, choose M here.
+
+if UWB
+
+config UWB_HWA
+ tristate "UWB Radio Control driver for WUSB-compliant USB dongles (HWA)"
+ depends on USB
+ help
+ This driver enables the radio controller for HWA USB
+ devices. HWA stands for Host Wire Adapter, and it is a UWB
+ Radio Controller connected to your system via USB. Most of
+ them come with a Wireless USB host controller also.
+
+ To compile this driver select Y (built in) or M (module). It
+ is safe to select any even if you do not have the hardware.
+
+config UWB_WHCI
+ tristate "UWB Radio Control driver for WHCI-compliant cards"
+ depends on PCI
+ help
+ This driver enables the radio controller for WHCI cards.
+
+ WHCI is a specification developed by Intel
+ (http://www.intel.com/technology/comms/wusb/whci.htm) much
+ in the spirit of USB's EHCI, but for UWB and Wireless USB
+ radio/host controllers connected via memory mapping (eg:
+ PCI). Most of these cards come also with a Wireless USB host
+ controller.
+
+ To compile this driver select Y (built in) or M (module). It
+ is safe to select any even if you do not have the hardware.
+
+config UWB_I1480U
+ tristate "Support for Intel Wireless UWB Link 1480 HWA"
+ depends on UWB_HWA
+ select FW_LOADER
+ help
+ This driver enables support for the i1480 when connected via
+ USB. It consists of a firmware uploader that will enable it
+ to behave as an HWA device.
+
+ To compile this driver select Y (built in) or M (module). It
+ is safe to select any even if you do not have the hardware.
+
+endif # UWB
diff --git a/drivers/uwb/Makefile b/drivers/uwb/Makefile
new file mode 100644
index 000000000..d47dd6e29
--- /dev/null
+++ b/drivers/uwb/Makefile
@@ -0,0 +1,31 @@
+obj-$(CONFIG_UWB) += uwb.o
+obj-$(CONFIG_UWB_WHCI) += umc.o whci.o whc-rc.o
+obj-$(CONFIG_UWB_HWA) += hwa-rc.o
+obj-$(CONFIG_UWB_I1480U) += i1480/
+
+uwb-objs := \
+ address.o \
+ allocator.o \
+ beacon.o \
+ driver.o \
+ drp.o \
+ drp-avail.o \
+ drp-ie.o \
+ est.o \
+ ie.o \
+ ie-rcv.o \
+ lc-dev.o \
+ lc-rc.o \
+ neh.o \
+ pal.o \
+ radio.o \
+ reset.o \
+ rsv.o \
+ scan.o \
+ uwb-debug.o \
+ uwbd.o
+
+umc-objs := \
+ umc-bus.o \
+ umc-dev.o \
+ umc-drv.o
diff --git a/drivers/uwb/address.c b/drivers/uwb/address.c
new file mode 100644
index 000000000..8739c4f4d
--- /dev/null
+++ b/drivers/uwb/address.c
@@ -0,0 +1,372 @@
+/*
+ * Ultra Wide Band
+ * Address management
+ *
+ * Copyright (C) 2005-2006 Intel Corporation
+ * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ *
+ *
+ * FIXME: docs
+ */
+
+#include <linux/slab.h>
+#include <linux/errno.h>
+#include <linux/module.h>
+#include <linux/device.h>
+#include <linux/random.h>
+#include <linux/etherdevice.h>
+
+#include "uwb-internal.h"
+
+
+/** Device Address Management command */
+struct uwb_rc_cmd_dev_addr_mgmt {
+ struct uwb_rccb rccb;
+ u8 bmOperationType;
+ u8 baAddr[6];
+} __attribute__((packed));
+
+
+/**
+ * Low level command for setting/getting UWB radio's addresses
+ *
+ * @hwarc: HWA Radio Control interface instance
+ * @bmOperationType:
+ * Set/get, MAC/DEV (see WUSB1.0[8.6.2.2])
+ * @baAddr: address buffer--assumed to have enough data to hold
+ * the address type requested.
+ * @reply: Pointer to reply buffer (can be stack allocated)
+ * @returns: 0 if ok, < 0 errno code on error.
+ *
+ * @cmd has to be allocated because USB cannot grok USB or vmalloc
+ * buffers depending on your combination of host architecture.
+ */
+static
+int uwb_rc_dev_addr_mgmt(struct uwb_rc *rc,
+ u8 bmOperationType, const u8 *baAddr,
+ struct uwb_rc_evt_dev_addr_mgmt *reply)
+{
+ int result;
+ struct uwb_rc_cmd_dev_addr_mgmt *cmd;
+
+ result = -ENOMEM;
+ cmd = kzalloc(sizeof(*cmd), GFP_KERNEL);
+ if (cmd == NULL)
+ goto error_kzalloc;
+ cmd->rccb.bCommandType = UWB_RC_CET_GENERAL;
+ cmd->rccb.wCommand = cpu_to_le16(UWB_RC_CMD_DEV_ADDR_MGMT);
+ cmd->bmOperationType = bmOperationType;
+ if (baAddr) {
+ size_t size = 0;
+ switch (bmOperationType >> 1) {
+ case 0: size = 2; break;
+ case 1: size = 6; break;
+ default: BUG();
+ }
+ memcpy(cmd->baAddr, baAddr, size);
+ }
+ reply->rceb.bEventType = UWB_RC_CET_GENERAL;
+ reply->rceb.wEvent = UWB_RC_CMD_DEV_ADDR_MGMT;
+ result = uwb_rc_cmd(rc, "DEV-ADDR-MGMT",
+ &cmd->rccb, sizeof(*cmd),
+ &reply->rceb, sizeof(*reply));
+ if (result < 0)
+ goto error_cmd;
+ if (result < sizeof(*reply)) {
+ dev_err(&rc->uwb_dev.dev,
+ "DEV-ADDR-MGMT: not enough data replied: "
+ "%d vs %zu bytes needed\n", result, sizeof(*reply));
+ result = -ENOMSG;
+ } else if (reply->bResultCode != UWB_RC_RES_SUCCESS) {
+ dev_err(&rc->uwb_dev.dev,
+ "DEV-ADDR-MGMT: command execution failed: %s (%d)\n",
+ uwb_rc_strerror(reply->bResultCode),
+ reply->bResultCode);
+ result = -EIO;
+ } else
+ result = 0;
+error_cmd:
+ kfree(cmd);
+error_kzalloc:
+ return result;
+}
+
+
+/**
+ * Set the UWB RC MAC or device address.
+ *
+ * @rc: UWB Radio Controller
+ * @_addr: Pointer to address to write [assumed to be either a
+ * 'struct uwb_mac_addr *' or a 'struct uwb_dev_addr *'].
+ * @type: Type of address to set (UWB_ADDR_DEV or UWB_ADDR_MAC).
+ * @returns: 0 if ok, < 0 errno code on error.
+ *
+ * Some anal retentivity here: even if both 'struct
+ * uwb_{dev,mac}_addr' have the actual byte array in the same offset
+ * and I could just pass _addr to hwarc_cmd_dev_addr_mgmt(), I prefer
+ * to use some syntatic sugar in case someday we decide to change the
+ * format of the structs. The compiler will optimize it out anyway.
+ */
+static int uwb_rc_addr_set(struct uwb_rc *rc,
+ const void *_addr, enum uwb_addr_type type)
+{
+ int result;
+ u8 bmOperationType = 0x1; /* Set address */
+ const struct uwb_dev_addr *dev_addr = _addr;
+ const struct uwb_mac_addr *mac_addr = _addr;
+ struct uwb_rc_evt_dev_addr_mgmt reply;
+ const u8 *baAddr;
+
+ result = -EINVAL;
+ switch (type) {
+ case UWB_ADDR_DEV:
+ baAddr = dev_addr->data;
+ break;
+ case UWB_ADDR_MAC:
+ baAddr = mac_addr->data;
+ bmOperationType |= 0x2;
+ break;
+ default:
+ return result;
+ }
+ return uwb_rc_dev_addr_mgmt(rc, bmOperationType, baAddr, &reply);
+}
+
+
+/**
+ * Get the UWB radio's MAC or device address.
+ *
+ * @rc: UWB Radio Controller
+ * @_addr: Where to write the address data [assumed to be either a
+ * 'struct uwb_mac_addr *' or a 'struct uwb_dev_addr *'].
+ * @type: Type of address to get (UWB_ADDR_DEV or UWB_ADDR_MAC).
+ * @returns: 0 if ok (and *_addr set), < 0 errno code on error.
+ *
+ * See comment in uwb_rc_addr_set() about anal retentivity in the
+ * type handling of the address variables.
+ */
+static int uwb_rc_addr_get(struct uwb_rc *rc,
+ void *_addr, enum uwb_addr_type type)
+{
+ int result;
+ u8 bmOperationType = 0x0; /* Get address */
+ struct uwb_rc_evt_dev_addr_mgmt evt;
+ struct uwb_dev_addr *dev_addr = _addr;
+ struct uwb_mac_addr *mac_addr = _addr;
+ u8 *baAddr;
+
+ result = -EINVAL;
+ switch (type) {
+ case UWB_ADDR_DEV:
+ baAddr = dev_addr->data;
+ break;
+ case UWB_ADDR_MAC:
+ bmOperationType |= 0x2;
+ baAddr = mac_addr->data;
+ break;
+ default:
+ return result;
+ }
+ result = uwb_rc_dev_addr_mgmt(rc, bmOperationType, baAddr, &evt);
+ if (result == 0)
+ switch (type) {
+ case UWB_ADDR_DEV:
+ memcpy(&dev_addr->data, evt.baAddr,
+ sizeof(dev_addr->data));
+ break;
+ case UWB_ADDR_MAC:
+ memcpy(&mac_addr->data, evt.baAddr,
+ sizeof(mac_addr->data));
+ break;
+ default: /* shut gcc up */
+ BUG();
+ }
+ return result;
+}
+
+
+/** Get @rc's MAC address to @addr */
+int uwb_rc_mac_addr_get(struct uwb_rc *rc,
+ struct uwb_mac_addr *addr) {
+ return uwb_rc_addr_get(rc, addr, UWB_ADDR_MAC);
+}
+EXPORT_SYMBOL_GPL(uwb_rc_mac_addr_get);
+
+
+/** Get @rc's device address to @addr */
+int uwb_rc_dev_addr_get(struct uwb_rc *rc,
+ struct uwb_dev_addr *addr) {
+ return uwb_rc_addr_get(rc, addr, UWB_ADDR_DEV);
+}
+EXPORT_SYMBOL_GPL(uwb_rc_dev_addr_get);
+
+
+/** Set @rc's address to @addr */
+int uwb_rc_mac_addr_set(struct uwb_rc *rc,
+ const struct uwb_mac_addr *addr)
+{
+ int result = -EINVAL;
+ mutex_lock(&rc->uwb_dev.mutex);
+ result = uwb_rc_addr_set(rc, addr, UWB_ADDR_MAC);
+ mutex_unlock(&rc->uwb_dev.mutex);
+ return result;
+}
+
+
+/** Set @rc's address to @addr */
+int uwb_rc_dev_addr_set(struct uwb_rc *rc,
+ const struct uwb_dev_addr *addr)
+{
+ int result = -EINVAL;
+ mutex_lock(&rc->uwb_dev.mutex);
+ result = uwb_rc_addr_set(rc, addr, UWB_ADDR_DEV);
+ rc->uwb_dev.dev_addr = *addr;
+ mutex_unlock(&rc->uwb_dev.mutex);
+ return result;
+}
+
+/* Returns !0 if given address is already assigned to device. */
+int __uwb_mac_addr_assigned_check(struct device *dev, void *_addr)
+{
+ struct uwb_dev *uwb_dev = to_uwb_dev(dev);
+ struct uwb_mac_addr *addr = _addr;
+
+ if (!uwb_mac_addr_cmp(addr, &uwb_dev->mac_addr))
+ return !0;
+ return 0;
+}
+
+/* Returns !0 if given address is already assigned to device. */
+int __uwb_dev_addr_assigned_check(struct device *dev, void *_addr)
+{
+ struct uwb_dev *uwb_dev = to_uwb_dev(dev);
+ struct uwb_dev_addr *addr = _addr;
+ if (!uwb_dev_addr_cmp(addr, &uwb_dev->dev_addr))
+ return !0;
+ return 0;
+}
+
+/**
+ * uwb_dev_addr_assign - assigned a generated DevAddr to a radio controller
+ * @rc: the (local) radio controller device requiring a new DevAddr
+ *
+ * A new DevAddr is required when:
+ * - first setting up a radio controller
+ * - if the hardware reports a DevAddr conflict
+ *
+ * The DevAddr is randomly generated in the generated DevAddr range
+ * [0x100, 0xfeff]. The number of devices in a beacon group is limited
+ * by mMaxBPLength (96) so this address space will never be exhausted.
+ *
+ * [ECMA-368] 17.1.1, 17.16.
+ */
+int uwb_rc_dev_addr_assign(struct uwb_rc *rc)
+{
+ struct uwb_dev_addr new_addr;
+
+ do {
+ get_random_bytes(new_addr.data, sizeof(new_addr.data));
+ } while (new_addr.data[0] == 0x00 || new_addr.data[0] == 0xff
+ || __uwb_dev_addr_assigned(rc, &new_addr));
+
+ return uwb_rc_dev_addr_set(rc, &new_addr);
+}
+
+/**
+ * uwbd_evt_handle_rc_dev_addr_conflict - handle a DEV_ADDR_CONFLICT event
+ * @evt: the DEV_ADDR_CONFLICT notification from the radio controller
+ *
+ * A new (non-conflicting) DevAddr is assigned to the radio controller.
+ *
+ * [ECMA-368] 17.1.1.1.
+ */
+int uwbd_evt_handle_rc_dev_addr_conflict(struct uwb_event *evt)
+{
+ struct uwb_rc *rc = evt->rc;
+
+ return uwb_rc_dev_addr_assign(rc);
+}
+
+/*
+ * Print the 48-bit EUI MAC address of the radio controller when
+ * reading /sys/class/uwb_rc/XX/mac_address
+ */
+static ssize_t uwb_rc_mac_addr_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct uwb_dev *uwb_dev = to_uwb_dev(dev);
+ struct uwb_rc *rc = uwb_dev->rc;
+ struct uwb_mac_addr addr;
+ ssize_t result;
+
+ mutex_lock(&rc->uwb_dev.mutex);
+ result = uwb_rc_addr_get(rc, &addr, UWB_ADDR_MAC);
+ mutex_unlock(&rc->uwb_dev.mutex);
+ if (result >= 0) {
+ result = uwb_mac_addr_print(buf, UWB_ADDR_STRSIZE, &addr);
+ buf[result++] = '\n';
+ }
+ return result;
+}
+
+/*
+ * Parse a 48 bit address written to /sys/class/uwb_rc/XX/mac_address
+ * and if correct, set it.
+ */
+static ssize_t uwb_rc_mac_addr_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t size)
+{
+ struct uwb_dev *uwb_dev = to_uwb_dev(dev);
+ struct uwb_rc *rc = uwb_dev->rc;
+ struct uwb_mac_addr addr;
+ ssize_t result;
+
+ result = sscanf(buf, "%hhx:%hhx:%hhx:%hhx:%hhx:%hhx\n",
+ &addr.data[0], &addr.data[1], &addr.data[2],
+ &addr.data[3], &addr.data[4], &addr.data[5]);
+ if (result != 6) {
+ result = -EINVAL;
+ goto out;
+ }
+ if (is_multicast_ether_addr(addr.data)) {
+ dev_err(&rc->uwb_dev.dev, "refusing to set multicast "
+ "MAC address %s\n", buf);
+ result = -EINVAL;
+ goto out;
+ }
+ result = uwb_rc_mac_addr_set(rc, &addr);
+ if (result == 0)
+ rc->uwb_dev.mac_addr = addr;
+out:
+ return result < 0 ? result : size;
+}
+DEVICE_ATTR(mac_address, S_IRUGO | S_IWUSR, uwb_rc_mac_addr_show, uwb_rc_mac_addr_store);
+
+/** Print @addr to @buf, @return bytes written */
+size_t __uwb_addr_print(char *buf, size_t buf_size, const unsigned char *addr,
+ int type)
+{
+ size_t result;
+ if (type)
+ result = scnprintf(buf, buf_size, "%pM", addr);
+ else
+ result = scnprintf(buf, buf_size, "%02x:%02x",
+ addr[1], addr[0]);
+ return result;
+}
+EXPORT_SYMBOL_GPL(__uwb_addr_print);
diff --git a/drivers/uwb/allocator.c b/drivers/uwb/allocator.c
new file mode 100644
index 000000000..6e3e713f0
--- /dev/null
+++ b/drivers/uwb/allocator.c
@@ -0,0 +1,385 @@
+/*
+ * UWB reservation management.
+ *
+ * Copyright (C) 2008 Cambridge Silicon Radio Ltd.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/uwb.h>
+
+#include "uwb-internal.h"
+
+static void uwb_rsv_fill_column_alloc(struct uwb_rsv_alloc_info *ai)
+{
+ int col, mas, safe_mas, unsafe_mas;
+ unsigned char *bm = ai->bm;
+ struct uwb_rsv_col_info *ci = ai->ci;
+ unsigned char c;
+
+ for (col = ci->csi.start_col; col < UWB_NUM_ZONES; col += ci->csi.interval) {
+
+ safe_mas = ci->csi.safe_mas_per_col;
+ unsafe_mas = ci->csi.unsafe_mas_per_col;
+
+ for (mas = 0; mas < UWB_MAS_PER_ZONE; mas++ ) {
+ if (bm[col * UWB_MAS_PER_ZONE + mas] == 0) {
+
+ if (safe_mas > 0) {
+ safe_mas--;
+ c = UWB_RSV_MAS_SAFE;
+ } else if (unsafe_mas > 0) {
+ unsafe_mas--;
+ c = UWB_RSV_MAS_UNSAFE;
+ } else {
+ break;
+ }
+ bm[col * UWB_MAS_PER_ZONE + mas] = c;
+ }
+ }
+ }
+}
+
+static void uwb_rsv_fill_row_alloc(struct uwb_rsv_alloc_info *ai)
+{
+ int mas, col, rows;
+ unsigned char *bm = ai->bm;
+ struct uwb_rsv_row_info *ri = &ai->ri;
+ unsigned char c;
+
+ rows = 1;
+ c = UWB_RSV_MAS_SAFE;
+ for (mas = UWB_MAS_PER_ZONE - 1; mas >= 0; mas--) {
+ if (ri->avail[mas] == 1) {
+
+ if (rows > ri->used_rows) {
+ break;
+ } else if (rows > 7) {
+ c = UWB_RSV_MAS_UNSAFE;
+ }
+
+ for (col = 0; col < UWB_NUM_ZONES; col++) {
+ if (bm[col * UWB_NUM_ZONES + mas] != UWB_RSV_MAS_NOT_AVAIL) {
+ bm[col * UWB_NUM_ZONES + mas] = c;
+ if(c == UWB_RSV_MAS_SAFE)
+ ai->safe_allocated_mases++;
+ else
+ ai->unsafe_allocated_mases++;
+ }
+ }
+ rows++;
+ }
+ }
+ ai->total_allocated_mases = ai->safe_allocated_mases + ai->unsafe_allocated_mases;
+}
+
+/*
+ * Find the best column set for a given availability, interval, num safe mas and
+ * num unsafe mas.
+ *
+ * The different sets are tried in order as shown below, depending on the interval.
+ *
+ * interval = 16
+ * deep = 0
+ * set 1 -> { 8 }
+ * deep = 1
+ * set 1 -> { 4 }
+ * set 2 -> { 12 }
+ * deep = 2
+ * set 1 -> { 2 }
+ * set 2 -> { 6 }
+ * set 3 -> { 10 }
+ * set 4 -> { 14 }
+ * deep = 3
+ * set 1 -> { 1 }
+ * set 2 -> { 3 }
+ * set 3 -> { 5 }
+ * set 4 -> { 7 }
+ * set 5 -> { 9 }
+ * set 6 -> { 11 }
+ * set 7 -> { 13 }
+ * set 8 -> { 15 }
+ *
+ * interval = 8
+ * deep = 0
+ * set 1 -> { 4 12 }
+ * deep = 1
+ * set 1 -> { 2 10 }
+ * set 2 -> { 6 14 }
+ * deep = 2
+ * set 1 -> { 1 9 }
+ * set 2 -> { 3 11 }
+ * set 3 -> { 5 13 }
+ * set 4 -> { 7 15 }
+ *
+ * interval = 4
+ * deep = 0
+ * set 1 -> { 2 6 10 14 }
+ * deep = 1
+ * set 1 -> { 1 5 9 13 }
+ * set 2 -> { 3 7 11 15 }
+ *
+ * interval = 2
+ * deep = 0
+ * set 1 -> { 1 3 5 7 9 11 13 15 }
+ */
+static int uwb_rsv_find_best_column_set(struct uwb_rsv_alloc_info *ai, int interval,
+ int num_safe_mas, int num_unsafe_mas)
+{
+ struct uwb_rsv_col_info *ci = ai->ci;
+ struct uwb_rsv_col_set_info *csi = &ci->csi;
+ struct uwb_rsv_col_set_info tmp_csi;
+ int deep, set, col, start_col_deep, col_start_set;
+ int start_col, max_mas_in_set, lowest_max_mas_in_deep;
+ int n_mas;
+ int found = UWB_RSV_ALLOC_NOT_FOUND;
+
+ tmp_csi.start_col = 0;
+ start_col_deep = interval;
+ n_mas = num_unsafe_mas + num_safe_mas;
+
+ for (deep = 0; ((interval >> deep) & 0x1) == 0; deep++) {
+ start_col_deep /= 2;
+ col_start_set = 0;
+ lowest_max_mas_in_deep = UWB_MAS_PER_ZONE;
+
+ for (set = 1; set <= (1 << deep); set++) {
+ max_mas_in_set = 0;
+ start_col = start_col_deep + col_start_set;
+ for (col = start_col; col < UWB_NUM_ZONES; col += interval) {
+
+ if (ci[col].max_avail_safe >= num_safe_mas &&
+ ci[col].max_avail_unsafe >= n_mas) {
+ if (ci[col].highest_mas[n_mas] > max_mas_in_set)
+ max_mas_in_set = ci[col].highest_mas[n_mas];
+ } else {
+ max_mas_in_set = 0;
+ break;
+ }
+ }
+ if ((lowest_max_mas_in_deep > max_mas_in_set) && max_mas_in_set) {
+ lowest_max_mas_in_deep = max_mas_in_set;
+
+ tmp_csi.start_col = start_col;
+ }
+ col_start_set += (interval >> deep);
+ }
+
+ if (lowest_max_mas_in_deep < 8) {
+ csi->start_col = tmp_csi.start_col;
+ found = UWB_RSV_ALLOC_FOUND;
+ break;
+ } else if ((lowest_max_mas_in_deep > 8) &&
+ (lowest_max_mas_in_deep != UWB_MAS_PER_ZONE) &&
+ (found == UWB_RSV_ALLOC_NOT_FOUND)) {
+ csi->start_col = tmp_csi.start_col;
+ found = UWB_RSV_ALLOC_FOUND;
+ }
+ }
+
+ if (found == UWB_RSV_ALLOC_FOUND) {
+ csi->interval = interval;
+ csi->safe_mas_per_col = num_safe_mas;
+ csi->unsafe_mas_per_col = num_unsafe_mas;
+
+ ai->safe_allocated_mases = (UWB_NUM_ZONES / interval) * num_safe_mas;
+ ai->unsafe_allocated_mases = (UWB_NUM_ZONES / interval) * num_unsafe_mas;
+ ai->total_allocated_mases = ai->safe_allocated_mases + ai->unsafe_allocated_mases;
+ ai->interval = interval;
+ }
+ return found;
+}
+
+static void get_row_descriptors(struct uwb_rsv_alloc_info *ai)
+{
+ unsigned char *bm = ai->bm;
+ struct uwb_rsv_row_info *ri = &ai->ri;
+ int col, mas;
+
+ ri->free_rows = 16;
+ for (mas = 0; mas < UWB_MAS_PER_ZONE; mas ++) {
+ ri->avail[mas] = 1;
+ for (col = 1; col < UWB_NUM_ZONES; col++) {
+ if (bm[col * UWB_NUM_ZONES + mas] == UWB_RSV_MAS_NOT_AVAIL) {
+ ri->free_rows--;
+ ri->avail[mas]=0;
+ break;
+ }
+ }
+ }
+}
+
+static void uwb_rsv_fill_column_info(unsigned char *bm, int column, struct uwb_rsv_col_info *rci)
+{
+ int mas;
+ int block_count = 0, start_block = 0;
+ int previous_avail = 0;
+ int available = 0;
+ int safe_mas_in_row[UWB_MAS_PER_ZONE] = {
+ 8, 7, 6, 5, 4, 4, 4, 4, 4, 4, 4, 4, 4, 3, 2, 1,
+ };
+
+ rci->max_avail_safe = 0;
+
+ for (mas = 0; mas < UWB_MAS_PER_ZONE; mas ++) {
+ if (!bm[column * UWB_NUM_ZONES + mas]) {
+ available++;
+ rci->max_avail_unsafe = available;
+
+ rci->highest_mas[available] = mas;
+
+ if (previous_avail) {
+ block_count++;
+ if ((block_count > safe_mas_in_row[start_block]) &&
+ (!rci->max_avail_safe))
+ rci->max_avail_safe = available - 1;
+ } else {
+ previous_avail = 1;
+ start_block = mas;
+ block_count = 1;
+ }
+ } else {
+ previous_avail = 0;
+ }
+ }
+ if (!rci->max_avail_safe)
+ rci->max_avail_safe = rci->max_avail_unsafe;
+}
+
+static void get_column_descriptors(struct uwb_rsv_alloc_info *ai)
+{
+ unsigned char *bm = ai->bm;
+ struct uwb_rsv_col_info *ci = ai->ci;
+ int col;
+
+ for (col = 1; col < UWB_NUM_ZONES; col++) {
+ uwb_rsv_fill_column_info(bm, col, &ci[col]);
+ }
+}
+
+static int uwb_rsv_find_best_row_alloc(struct uwb_rsv_alloc_info *ai)
+{
+ int n_rows;
+ int max_rows = ai->max_mas / UWB_USABLE_MAS_PER_ROW;
+ int min_rows = ai->min_mas / UWB_USABLE_MAS_PER_ROW;
+ if (ai->min_mas % UWB_USABLE_MAS_PER_ROW)
+ min_rows++;
+ for (n_rows = max_rows; n_rows >= min_rows; n_rows--) {
+ if (n_rows <= ai->ri.free_rows) {
+ ai->ri.used_rows = n_rows;
+ ai->interval = 1; /* row reservation */
+ uwb_rsv_fill_row_alloc(ai);
+ return UWB_RSV_ALLOC_FOUND;
+ }
+ }
+ return UWB_RSV_ALLOC_NOT_FOUND;
+}
+
+static int uwb_rsv_find_best_col_alloc(struct uwb_rsv_alloc_info *ai, int interval)
+{
+ int n_safe, n_unsafe, n_mas;
+ int n_column = UWB_NUM_ZONES / interval;
+ int max_per_zone = ai->max_mas / n_column;
+ int min_per_zone = ai->min_mas / n_column;
+
+ if (ai->min_mas % n_column)
+ min_per_zone++;
+
+ if (min_per_zone > UWB_MAS_PER_ZONE) {
+ return UWB_RSV_ALLOC_NOT_FOUND;
+ }
+
+ if (max_per_zone > UWB_MAS_PER_ZONE) {
+ max_per_zone = UWB_MAS_PER_ZONE;
+ }
+
+ for (n_mas = max_per_zone; n_mas >= min_per_zone; n_mas--) {
+ if (uwb_rsv_find_best_column_set(ai, interval, 0, n_mas) == UWB_RSV_ALLOC_NOT_FOUND)
+ continue;
+ for (n_safe = n_mas; n_safe >= 0; n_safe--) {
+ n_unsafe = n_mas - n_safe;
+ if (uwb_rsv_find_best_column_set(ai, interval, n_safe, n_unsafe) == UWB_RSV_ALLOC_FOUND) {
+ uwb_rsv_fill_column_alloc(ai);
+ return UWB_RSV_ALLOC_FOUND;
+ }
+ }
+ }
+ return UWB_RSV_ALLOC_NOT_FOUND;
+}
+
+int uwb_rsv_find_best_allocation(struct uwb_rsv *rsv, struct uwb_mas_bm *available,
+ struct uwb_mas_bm *result)
+{
+ struct uwb_rsv_alloc_info *ai;
+ int interval;
+ int bit_index;
+
+ ai = kzalloc(sizeof(struct uwb_rsv_alloc_info), GFP_KERNEL);
+ if (!ai)
+ return UWB_RSV_ALLOC_NOT_FOUND;
+ ai->min_mas = rsv->min_mas;
+ ai->max_mas = rsv->max_mas;
+ ai->max_interval = rsv->max_interval;
+
+
+ /* fill the not available vector from the available bm */
+ for_each_clear_bit(bit_index, available->bm, UWB_NUM_MAS)
+ ai->bm[bit_index] = UWB_RSV_MAS_NOT_AVAIL;
+
+ if (ai->max_interval == 1) {
+ get_row_descriptors(ai);
+ if (uwb_rsv_find_best_row_alloc(ai) == UWB_RSV_ALLOC_FOUND)
+ goto alloc_found;
+ else
+ goto alloc_not_found;
+ }
+
+ get_column_descriptors(ai);
+
+ for (interval = 16; interval >= 2; interval>>=1) {
+ if (interval > ai->max_interval)
+ continue;
+ if (uwb_rsv_find_best_col_alloc(ai, interval) == UWB_RSV_ALLOC_FOUND)
+ goto alloc_found;
+ }
+
+ /* try row reservation if no column is found */
+ get_row_descriptors(ai);
+ if (uwb_rsv_find_best_row_alloc(ai) == UWB_RSV_ALLOC_FOUND)
+ goto alloc_found;
+ else
+ goto alloc_not_found;
+
+ alloc_found:
+ bitmap_zero(result->bm, UWB_NUM_MAS);
+ bitmap_zero(result->unsafe_bm, UWB_NUM_MAS);
+ /* fill the safe and unsafe bitmaps */
+ for (bit_index = 0; bit_index < UWB_NUM_MAS; bit_index++) {
+ if (ai->bm[bit_index] == UWB_RSV_MAS_SAFE)
+ set_bit(bit_index, result->bm);
+ else if (ai->bm[bit_index] == UWB_RSV_MAS_UNSAFE)
+ set_bit(bit_index, result->unsafe_bm);
+ }
+ bitmap_or(result->bm, result->bm, result->unsafe_bm, UWB_NUM_MAS);
+
+ result->safe = ai->safe_allocated_mases;
+ result->unsafe = ai->unsafe_allocated_mases;
+
+ kfree(ai);
+ return UWB_RSV_ALLOC_FOUND;
+
+ alloc_not_found:
+ kfree(ai);
+ return UWB_RSV_ALLOC_NOT_FOUND;
+}
diff --git a/drivers/uwb/beacon.c b/drivers/uwb/beacon.c
new file mode 100644
index 000000000..f40745fcb
--- /dev/null
+++ b/drivers/uwb/beacon.c
@@ -0,0 +1,609 @@
+/*
+ * Ultra Wide Band
+ * Beacon management
+ *
+ * Copyright (C) 2005-2006 Intel Corporation
+ * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ *
+ *
+ * FIXME: docs
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/device.h>
+#include <linux/err.h>
+#include <linux/kdev_t.h>
+#include <linux/slab.h>
+
+#include "uwb-internal.h"
+
+/* Start Beaconing command structure */
+struct uwb_rc_cmd_start_beacon {
+ struct uwb_rccb rccb;
+ __le16 wBPSTOffset;
+ u8 bChannelNumber;
+} __attribute__((packed));
+
+
+static int uwb_rc_start_beacon(struct uwb_rc *rc, u16 bpst_offset, u8 channel)
+{
+ int result;
+ struct uwb_rc_cmd_start_beacon *cmd;
+ struct uwb_rc_evt_confirm reply;
+
+ cmd = kzalloc(sizeof(*cmd), GFP_KERNEL);
+ if (cmd == NULL)
+ return -ENOMEM;
+ cmd->rccb.bCommandType = UWB_RC_CET_GENERAL;
+ cmd->rccb.wCommand = cpu_to_le16(UWB_RC_CMD_START_BEACON);
+ cmd->wBPSTOffset = cpu_to_le16(bpst_offset);
+ cmd->bChannelNumber = channel;
+ reply.rceb.bEventType = UWB_RC_CET_GENERAL;
+ reply.rceb.wEvent = UWB_RC_CMD_START_BEACON;
+ result = uwb_rc_cmd(rc, "START-BEACON", &cmd->rccb, sizeof(*cmd),
+ &reply.rceb, sizeof(reply));
+ if (result < 0)
+ goto error_cmd;
+ if (reply.bResultCode != UWB_RC_RES_SUCCESS) {
+ dev_err(&rc->uwb_dev.dev,
+ "START-BEACON: command execution failed: %s (%d)\n",
+ uwb_rc_strerror(reply.bResultCode), reply.bResultCode);
+ result = -EIO;
+ }
+error_cmd:
+ kfree(cmd);
+ return result;
+}
+
+static int uwb_rc_stop_beacon(struct uwb_rc *rc)
+{
+ int result;
+ struct uwb_rccb *cmd;
+ struct uwb_rc_evt_confirm reply;
+
+ cmd = kzalloc(sizeof(*cmd), GFP_KERNEL);
+ if (cmd == NULL)
+ return -ENOMEM;
+ cmd->bCommandType = UWB_RC_CET_GENERAL;
+ cmd->wCommand = cpu_to_le16(UWB_RC_CMD_STOP_BEACON);
+ reply.rceb.bEventType = UWB_RC_CET_GENERAL;
+ reply.rceb.wEvent = UWB_RC_CMD_STOP_BEACON;
+ result = uwb_rc_cmd(rc, "STOP-BEACON", cmd, sizeof(*cmd),
+ &reply.rceb, sizeof(reply));
+ if (result < 0)
+ goto error_cmd;
+ if (reply.bResultCode != UWB_RC_RES_SUCCESS) {
+ dev_err(&rc->uwb_dev.dev,
+ "STOP-BEACON: command execution failed: %s (%d)\n",
+ uwb_rc_strerror(reply.bResultCode), reply.bResultCode);
+ result = -EIO;
+ }
+error_cmd:
+ kfree(cmd);
+ return result;
+}
+
+/*
+ * Start/stop beacons
+ *
+ * @rc: UWB Radio Controller to operate on
+ * @channel: UWB channel on which to beacon (WUSB[table
+ * 5-12]). If -1, stop beaconing.
+ * @bpst_offset: Beacon Period Start Time offset; FIXME-do zero
+ *
+ * According to WHCI 0.95 [4.13.6] the driver will only receive the RCEB
+ * of a SET IE command after the device sent the first beacon that includes
+ * the IEs specified in the SET IE command. So, after we start beaconing we
+ * check if there is anything in the IE cache and call the SET IE command
+ * if needed.
+ */
+int uwb_rc_beacon(struct uwb_rc *rc, int channel, unsigned bpst_offset)
+{
+ int result;
+ struct device *dev = &rc->uwb_dev.dev;
+
+ dev_dbg(dev, "%s: channel = %d\n", __func__, channel);
+ if (channel < 0)
+ channel = -1;
+ if (channel == -1)
+ result = uwb_rc_stop_beacon(rc);
+ else {
+ /* channel >= 0...dah */
+ result = uwb_rc_start_beacon(rc, bpst_offset, channel);
+ if (result < 0) {
+ dev_err(dev, "Cannot start beaconing: %d\n", result);
+ return result;
+ }
+ if (le16_to_cpu(rc->ies->wIELength) > 0) {
+ result = uwb_rc_set_ie(rc, rc->ies);
+ if (result < 0) {
+ dev_err(dev, "Cannot set new IE on device: "
+ "%d\n", result);
+ result = uwb_rc_stop_beacon(rc);
+ channel = -1;
+ bpst_offset = 0;
+ }
+ }
+ }
+
+ if (result >= 0)
+ rc->beaconing = channel;
+ return result;
+}
+
+/*
+ * Beacon cache
+ *
+ * The purpose of this is to speed up the lookup of becon information
+ * when a new beacon arrives. The UWB Daemon uses it also to keep a
+ * tab of which devices are in radio distance and which not. When a
+ * device's beacon stays present for more than a certain amount of
+ * time, it is considered a new, usable device. When a beacon ceases
+ * to be received for a certain amount of time, it is considered that
+ * the device is gone.
+ *
+ * FIXME: use an allocator for the entries
+ * FIXME: use something faster for search than a list
+ */
+
+void uwb_bce_kfree(struct kref *_bce)
+{
+ struct uwb_beca_e *bce = container_of(_bce, struct uwb_beca_e, refcnt);
+
+ kfree(bce->be);
+ kfree(bce);
+}
+
+
+/* Find a beacon by dev addr in the cache */
+static
+struct uwb_beca_e *__uwb_beca_find_bydev(struct uwb_rc *rc,
+ const struct uwb_dev_addr *dev_addr)
+{
+ struct uwb_beca_e *bce, *next;
+ list_for_each_entry_safe(bce, next, &rc->uwb_beca.list, node) {
+ if (!memcmp(&bce->dev_addr, dev_addr, sizeof(bce->dev_addr)))
+ goto out;
+ }
+ bce = NULL;
+out:
+ return bce;
+}
+
+/* Find a beacon by dev addr in the cache */
+static
+struct uwb_beca_e *__uwb_beca_find_bymac(struct uwb_rc *rc,
+ const struct uwb_mac_addr *mac_addr)
+{
+ struct uwb_beca_e *bce, *next;
+ list_for_each_entry_safe(bce, next, &rc->uwb_beca.list, node) {
+ if (!memcmp(bce->mac_addr, mac_addr->data,
+ sizeof(struct uwb_mac_addr)))
+ goto out;
+ }
+ bce = NULL;
+out:
+ return bce;
+}
+
+/**
+ * uwb_dev_get_by_devaddr - get a UWB device with a specific DevAddr
+ * @rc: the radio controller that saw the device
+ * @devaddr: DevAddr of the UWB device to find
+ *
+ * There may be more than one matching device (in the case of a
+ * DevAddr conflict), but only the first one is returned.
+ */
+struct uwb_dev *uwb_dev_get_by_devaddr(struct uwb_rc *rc,
+ const struct uwb_dev_addr *devaddr)
+{
+ struct uwb_dev *found = NULL;
+ struct uwb_beca_e *bce;
+
+ mutex_lock(&rc->uwb_beca.mutex);
+ bce = __uwb_beca_find_bydev(rc, devaddr);
+ if (bce)
+ found = uwb_dev_try_get(rc, bce->uwb_dev);
+ mutex_unlock(&rc->uwb_beca.mutex);
+
+ return found;
+}
+
+/**
+ * uwb_dev_get_by_macaddr - get a UWB device with a specific EUI-48
+ * @rc: the radio controller that saw the device
+ * @devaddr: EUI-48 of the UWB device to find
+ */
+struct uwb_dev *uwb_dev_get_by_macaddr(struct uwb_rc *rc,
+ const struct uwb_mac_addr *macaddr)
+{
+ struct uwb_dev *found = NULL;
+ struct uwb_beca_e *bce;
+
+ mutex_lock(&rc->uwb_beca.mutex);
+ bce = __uwb_beca_find_bymac(rc, macaddr);
+ if (bce)
+ found = uwb_dev_try_get(rc, bce->uwb_dev);
+ mutex_unlock(&rc->uwb_beca.mutex);
+
+ return found;
+}
+
+/* Initialize a beacon cache entry */
+static void uwb_beca_e_init(struct uwb_beca_e *bce)
+{
+ mutex_init(&bce->mutex);
+ kref_init(&bce->refcnt);
+ stats_init(&bce->lqe_stats);
+ stats_init(&bce->rssi_stats);
+}
+
+/*
+ * Add a beacon to the cache
+ *
+ * @be: Beacon event information
+ * @bf: Beacon frame (part of b, really)
+ * @ts_jiffies: Timestamp (in jiffies) when the beacon was received
+ */
+static
+struct uwb_beca_e *__uwb_beca_add(struct uwb_rc *rc,
+ struct uwb_rc_evt_beacon *be,
+ struct uwb_beacon_frame *bf,
+ unsigned long ts_jiffies)
+{
+ struct uwb_beca_e *bce;
+
+ bce = kzalloc(sizeof(*bce), GFP_KERNEL);
+ if (bce == NULL)
+ return NULL;
+ uwb_beca_e_init(bce);
+ bce->ts_jiffies = ts_jiffies;
+ bce->uwb_dev = NULL;
+ list_add(&bce->node, &rc->uwb_beca.list);
+ return bce;
+}
+
+/*
+ * Wipe out beacon entries that became stale
+ *
+ * Remove associated devicest too.
+ */
+void uwb_beca_purge(struct uwb_rc *rc)
+{
+ struct uwb_beca_e *bce, *next;
+ unsigned long expires;
+
+ mutex_lock(&rc->uwb_beca.mutex);
+ list_for_each_entry_safe(bce, next, &rc->uwb_beca.list, node) {
+ expires = bce->ts_jiffies + msecs_to_jiffies(beacon_timeout_ms);
+ if (time_after(jiffies, expires)) {
+ uwbd_dev_offair(bce);
+ }
+ }
+ mutex_unlock(&rc->uwb_beca.mutex);
+}
+
+/* Clean up the whole beacon cache. Called on shutdown */
+void uwb_beca_release(struct uwb_rc *rc)
+{
+ struct uwb_beca_e *bce, *next;
+
+ mutex_lock(&rc->uwb_beca.mutex);
+ list_for_each_entry_safe(bce, next, &rc->uwb_beca.list, node) {
+ list_del(&bce->node);
+ uwb_bce_put(bce);
+ }
+ mutex_unlock(&rc->uwb_beca.mutex);
+}
+
+static void uwb_beacon_print(struct uwb_rc *rc, struct uwb_rc_evt_beacon *be,
+ struct uwb_beacon_frame *bf)
+{
+ char macbuf[UWB_ADDR_STRSIZE];
+ char devbuf[UWB_ADDR_STRSIZE];
+ char dstbuf[UWB_ADDR_STRSIZE];
+
+ uwb_mac_addr_print(macbuf, sizeof(macbuf), &bf->Device_Identifier);
+ uwb_dev_addr_print(devbuf, sizeof(devbuf), &bf->hdr.SrcAddr);
+ uwb_dev_addr_print(dstbuf, sizeof(dstbuf), &bf->hdr.DestAddr);
+ dev_info(&rc->uwb_dev.dev,
+ "BEACON from %s to %s (ch%u offset %u slot %u MAC %s)\n",
+ devbuf, dstbuf, be->bChannelNumber, be->wBPSTOffset,
+ bf->Beacon_Slot_Number, macbuf);
+}
+
+/*
+ * @bce: beacon cache entry, referenced
+ */
+ssize_t uwb_bce_print_IEs(struct uwb_dev *uwb_dev, struct uwb_beca_e *bce,
+ char *buf, size_t size)
+{
+ ssize_t result = 0;
+ struct uwb_rc_evt_beacon *be;
+ struct uwb_beacon_frame *bf;
+ int ies_len;
+ struct uwb_ie_hdr *ies;
+
+ mutex_lock(&bce->mutex);
+
+ be = bce->be;
+ if (be) {
+ bf = (struct uwb_beacon_frame *)bce->be->BeaconInfo;
+ ies_len = be->wBeaconInfoLength - sizeof(struct uwb_beacon_frame);
+ ies = (struct uwb_ie_hdr *)bf->IEData;
+
+ result = uwb_ie_dump_hex(ies, ies_len, buf, size);
+ }
+
+ mutex_unlock(&bce->mutex);
+
+ return result;
+}
+
+/*
+ * Verify that the beacon event, frame and IEs are ok
+ */
+static int uwb_verify_beacon(struct uwb_rc *rc, struct uwb_event *evt,
+ struct uwb_rc_evt_beacon *be)
+{
+ int result = -EINVAL;
+ struct uwb_beacon_frame *bf;
+ struct device *dev = &rc->uwb_dev.dev;
+
+ /* Is there enough data to decode a beacon frame? */
+ if (evt->notif.size < sizeof(*be) + sizeof(*bf)) {
+ dev_err(dev, "BEACON event: Not enough data to decode "
+ "(%zu vs %zu bytes needed)\n", evt->notif.size,
+ sizeof(*be) + sizeof(*bf));
+ goto error;
+ }
+ /* FIXME: make sure beacon frame IEs are fine and that the whole thing
+ * is consistent */
+ result = 0;
+error:
+ return result;
+}
+
+/*
+ * Handle UWB_RC_EVT_BEACON events
+ *
+ * We check the beacon cache to see how the received beacon fares. If
+ * is there already we refresh the timestamp. If not we create a new
+ * entry.
+ *
+ * According to the WHCI and WUSB specs, only one beacon frame is
+ * allowed per notification block, so we don't bother about scanning
+ * for more.
+ */
+int uwbd_evt_handle_rc_beacon(struct uwb_event *evt)
+{
+ int result = -EINVAL;
+ struct uwb_rc *rc;
+ struct uwb_rc_evt_beacon *be;
+ struct uwb_beacon_frame *bf;
+ struct uwb_beca_e *bce;
+
+ rc = evt->rc;
+ be = container_of(evt->notif.rceb, struct uwb_rc_evt_beacon, rceb);
+ result = uwb_verify_beacon(rc, evt, be);
+ if (result < 0)
+ return result;
+
+ /* FIXME: handle alien beacons. */
+ if (be->bBeaconType == UWB_RC_BEACON_TYPE_OL_ALIEN ||
+ be->bBeaconType == UWB_RC_BEACON_TYPE_NOL_ALIEN) {
+ return -ENOSYS;
+ }
+
+ bf = (struct uwb_beacon_frame *) be->BeaconInfo;
+
+ /*
+ * Drop beacons from devices with a NULL EUI-48 -- they cannot
+ * be uniquely identified.
+ *
+ * It's expected that these will all be WUSB devices and they
+ * have a WUSB specific connection method so ignoring them
+ * here shouldn't be a problem.
+ */
+ if (uwb_mac_addr_bcast(&bf->Device_Identifier))
+ return 0;
+
+ mutex_lock(&rc->uwb_beca.mutex);
+ bce = __uwb_beca_find_bymac(rc, &bf->Device_Identifier);
+ if (bce == NULL) {
+ /* Not in there, a new device is pinging */
+ uwb_beacon_print(evt->rc, be, bf);
+ bce = __uwb_beca_add(rc, be, bf, evt->ts_jiffies);
+ if (bce == NULL) {
+ mutex_unlock(&rc->uwb_beca.mutex);
+ return -ENOMEM;
+ }
+ }
+ mutex_unlock(&rc->uwb_beca.mutex);
+
+ mutex_lock(&bce->mutex);
+ /* purge old beacon data */
+ kfree(bce->be);
+
+ /* Update commonly used fields */
+ bce->ts_jiffies = evt->ts_jiffies;
+ bce->be = be;
+ bce->dev_addr = bf->hdr.SrcAddr;
+ bce->mac_addr = &bf->Device_Identifier;
+ be->wBPSTOffset = le16_to_cpu(be->wBPSTOffset);
+ be->wBeaconInfoLength = le16_to_cpu(be->wBeaconInfoLength);
+ stats_add_sample(&bce->lqe_stats, be->bLQI - 7);
+ stats_add_sample(&bce->rssi_stats, be->bRSSI + 18);
+
+ /*
+ * This might be a beacon from a new device.
+ */
+ if (bce->uwb_dev == NULL)
+ uwbd_dev_onair(evt->rc, bce);
+
+ mutex_unlock(&bce->mutex);
+
+ return 1; /* we keep the event data */
+}
+
+/*
+ * Handle UWB_RC_EVT_BEACON_SIZE events
+ *
+ * XXXXX
+ */
+int uwbd_evt_handle_rc_beacon_size(struct uwb_event *evt)
+{
+ int result = -EINVAL;
+ struct device *dev = &evt->rc->uwb_dev.dev;
+ struct uwb_rc_evt_beacon_size *bs;
+
+ /* Is there enough data to decode the event? */
+ if (evt->notif.size < sizeof(*bs)) {
+ dev_err(dev, "BEACON SIZE notification: Not enough data to "
+ "decode (%zu vs %zu bytes needed)\n",
+ evt->notif.size, sizeof(*bs));
+ goto error;
+ }
+ bs = container_of(evt->notif.rceb, struct uwb_rc_evt_beacon_size, rceb);
+ if (0)
+ dev_info(dev, "Beacon size changed to %u bytes "
+ "(FIXME: action?)\n", le16_to_cpu(bs->wNewBeaconSize));
+ else {
+ /* temporary hack until we do something with this message... */
+ static unsigned count;
+ if (++count % 1000 == 0)
+ dev_info(dev, "Beacon size changed %u times "
+ "(FIXME: action?)\n", count);
+ }
+ result = 0;
+error:
+ return result;
+}
+
+/**
+ * uwbd_evt_handle_rc_bp_slot_change - handle a BP_SLOT_CHANGE event
+ * @evt: the BP_SLOT_CHANGE notification from the radio controller
+ *
+ * If the event indicates that no beacon period slots were available
+ * then radio controller has transitioned to a non-beaconing state.
+ * Otherwise, simply save the current beacon slot.
+ */
+int uwbd_evt_handle_rc_bp_slot_change(struct uwb_event *evt)
+{
+ struct uwb_rc *rc = evt->rc;
+ struct device *dev = &rc->uwb_dev.dev;
+ struct uwb_rc_evt_bp_slot_change *bpsc;
+
+ if (evt->notif.size < sizeof(*bpsc)) {
+ dev_err(dev, "BP SLOT CHANGE event: Not enough data\n");
+ return -EINVAL;
+ }
+ bpsc = container_of(evt->notif.rceb, struct uwb_rc_evt_bp_slot_change, rceb);
+
+ if (uwb_rc_evt_bp_slot_change_no_slot(bpsc)) {
+ dev_err(dev, "stopped beaconing: No free slots in BP\n");
+ mutex_lock(&rc->uwb_dev.mutex);
+ rc->beaconing = -1;
+ mutex_unlock(&rc->uwb_dev.mutex);
+ } else
+ rc->uwb_dev.beacon_slot = uwb_rc_evt_bp_slot_change_slot_num(bpsc);
+
+ return 0;
+}
+
+/**
+ * Handle UWB_RC_EVT_BPOIE_CHANGE events
+ *
+ * XXXXX
+ */
+struct uwb_ie_bpo {
+ struct uwb_ie_hdr hdr;
+ u8 bp_length;
+ u8 data[];
+} __attribute__((packed));
+
+int uwbd_evt_handle_rc_bpoie_change(struct uwb_event *evt)
+{
+ int result = -EINVAL;
+ struct device *dev = &evt->rc->uwb_dev.dev;
+ struct uwb_rc_evt_bpoie_change *bpoiec;
+ struct uwb_ie_bpo *bpoie;
+ static unsigned count; /* FIXME: this is a temp hack */
+ size_t iesize;
+
+ /* Is there enough data to decode it? */
+ if (evt->notif.size < sizeof(*bpoiec)) {
+ dev_err(dev, "BPOIEC notification: Not enough data to "
+ "decode (%zu vs %zu bytes needed)\n",
+ evt->notif.size, sizeof(*bpoiec));
+ goto error;
+ }
+ bpoiec = container_of(evt->notif.rceb, struct uwb_rc_evt_bpoie_change, rceb);
+ iesize = le16_to_cpu(bpoiec->wBPOIELength);
+ if (iesize < sizeof(*bpoie)) {
+ dev_err(dev, "BPOIEC notification: Not enough IE data to "
+ "decode (%zu vs %zu bytes needed)\n",
+ iesize, sizeof(*bpoie));
+ goto error;
+ }
+ if (++count % 1000 == 0) /* Lame placeholder */
+ dev_info(dev, "BPOIE: %u changes received\n", count);
+ /*
+ * FIXME: At this point we should go over all the IEs in the
+ * bpoiec->BPOIE array and act on each.
+ */
+ result = 0;
+error:
+ return result;
+}
+
+/*
+ * Print beaconing state.
+ */
+static ssize_t uwb_rc_beacon_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct uwb_dev *uwb_dev = to_uwb_dev(dev);
+ struct uwb_rc *rc = uwb_dev->rc;
+ ssize_t result;
+
+ mutex_lock(&rc->uwb_dev.mutex);
+ result = sprintf(buf, "%d\n", rc->beaconing);
+ mutex_unlock(&rc->uwb_dev.mutex);
+ return result;
+}
+
+/*
+ * Start beaconing on the specified channel, or stop beaconing.
+ */
+static ssize_t uwb_rc_beacon_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t size)
+{
+ struct uwb_dev *uwb_dev = to_uwb_dev(dev);
+ struct uwb_rc *rc = uwb_dev->rc;
+ int channel;
+ ssize_t result = -EINVAL;
+
+ result = sscanf(buf, "%d", &channel);
+ if (result >= 1)
+ result = uwb_radio_force_channel(rc, channel);
+
+ return result < 0 ? result : size;
+}
+DEVICE_ATTR(beacon, S_IRUGO | S_IWUSR, uwb_rc_beacon_show, uwb_rc_beacon_store);
diff --git a/drivers/uwb/driver.c b/drivers/uwb/driver.c
new file mode 100644
index 000000000..776bcb3c2
--- /dev/null
+++ b/drivers/uwb/driver.c
@@ -0,0 +1,156 @@
+/*
+ * Ultra Wide Band
+ * Driver initialization, etc
+ *
+ * Copyright (C) 2005-2006 Intel Corporation
+ * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ *
+ *
+ * FIXME: docs
+ *
+ * Life cycle: FIXME: explain
+ *
+ * UWB radio controller:
+ *
+ * 1. alloc a uwb_rc, zero it
+ * 2. call uwb_rc_init() on it to set it up + ops (won't do any
+ * kind of allocation)
+ * 3. register (now it is owned by the UWB stack--deregister before
+ * freeing/destroying).
+ * 4. It lives on it's own now (UWB stack handles)--when it
+ * disconnects, call unregister()
+ * 5. free it.
+ *
+ * Make sure you have a reference to the uwb_rc before calling
+ * any of the UWB API functions.
+ *
+ * TODO:
+ *
+ * 1. Locking and life cycle management is crappy still. All entry
+ * points to the UWB HCD API assume you have a reference on the
+ * uwb_rc structure and that it won't go away. They mutex lock it
+ * before doing anything.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/device.h>
+#include <linux/err.h>
+#include <linux/kdev_t.h>
+#include <linux/random.h>
+
+#include "uwb-internal.h"
+
+
+/* UWB stack attributes (or 'global' constants) */
+
+
+/**
+ * If a beacon disappears for longer than this, then we consider the
+ * device who was represented by that beacon to be gone.
+ *
+ * ECMA-368[17.2.3, last para] establishes that a device must not
+ * consider a device to be its neighbour if he doesn't receive a beacon
+ * for more than mMaxLostBeacons. mMaxLostBeacons is defined in
+ * ECMA-368[17.16] as 3; because we can get only one beacon per
+ * superframe, that'd be 3 * 65ms = 195 ~ 200 ms. Let's give it time
+ * for jitter and stuff and make it 500 ms.
+ */
+unsigned long beacon_timeout_ms = 500;
+
+static
+ssize_t beacon_timeout_ms_show(struct class *class,
+ struct class_attribute *attr,
+ char *buf)
+{
+ return scnprintf(buf, PAGE_SIZE, "%lu\n", beacon_timeout_ms);
+}
+
+static
+ssize_t beacon_timeout_ms_store(struct class *class,
+ struct class_attribute *attr,
+ const char *buf, size_t size)
+{
+ unsigned long bt;
+ ssize_t result;
+ result = sscanf(buf, "%lu", &bt);
+ if (result != 1)
+ return -EINVAL;
+ beacon_timeout_ms = bt;
+ return size;
+}
+
+static struct class_attribute uwb_class_attrs[] = {
+ __ATTR(beacon_timeout_ms, S_IWUSR | S_IRUGO,
+ beacon_timeout_ms_show, beacon_timeout_ms_store),
+ __ATTR_NULL,
+};
+
+/** Device model classes */
+struct class uwb_rc_class = {
+ .name = "uwb_rc",
+ .class_attrs = uwb_class_attrs,
+};
+
+
+static int __init uwb_subsys_init(void)
+{
+ int result = 0;
+
+ result = uwb_est_create();
+ if (result < 0) {
+ printk(KERN_ERR "uwb: Can't initialize EST subsystem\n");
+ goto error_est_init;
+ }
+
+ result = class_register(&uwb_rc_class);
+ if (result < 0)
+ goto error_uwb_rc_class_register;
+
+ /* Register the UWB bus */
+ result = bus_register(&uwb_bus_type);
+ if (result) {
+ pr_err("%s - registering bus driver failed\n", __func__);
+ goto exit_bus;
+ }
+
+ uwb_dbg_init();
+ return 0;
+
+exit_bus:
+ class_unregister(&uwb_rc_class);
+error_uwb_rc_class_register:
+ uwb_est_destroy();
+error_est_init:
+ return result;
+}
+module_init(uwb_subsys_init);
+
+static void __exit uwb_subsys_exit(void)
+{
+ uwb_dbg_exit();
+ bus_unregister(&uwb_bus_type);
+ class_unregister(&uwb_rc_class);
+ uwb_est_destroy();
+ return;
+}
+module_exit(uwb_subsys_exit);
+
+MODULE_AUTHOR("Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>");
+MODULE_DESCRIPTION("Ultra Wide Band core");
+MODULE_LICENSE("GPL");
diff --git a/drivers/uwb/drp-avail.c b/drivers/uwb/drp-avail.c
new file mode 100644
index 000000000..40a540a5a
--- /dev/null
+++ b/drivers/uwb/drp-avail.c
@@ -0,0 +1,290 @@
+/*
+ * Ultra Wide Band
+ * DRP availability management
+ *
+ * Copyright (C) 2005-2006 Intel Corporation
+ * Reinette Chatre <reinette.chatre@intel.com>
+ * Copyright (C) 2008 Cambridge Silicon Radio Ltd.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ *
+ *
+ * Manage DRP Availability (the MAS available for DRP
+ * reservations). Thus:
+ *
+ * - Handle DRP Availability Change notifications
+ *
+ * - Allow the reservation manager to indicate MAS reserved/released
+ * by local (owned by/targeted at the radio controller)
+ * reservations.
+ *
+ * - Based on the two sources above, generate a DRP Availability IE to
+ * be included in the beacon.
+ *
+ * See also the documentation for struct uwb_drp_avail.
+ */
+
+#include <linux/errno.h>
+#include <linux/module.h>
+#include <linux/device.h>
+#include <linux/bitmap.h>
+#include "uwb-internal.h"
+
+/**
+ * uwb_drp_avail_init - initialize an RC's MAS availability
+ *
+ * All MAS are available initially. The RC will inform use which
+ * slots are used for the BP (it may change in size).
+ */
+void uwb_drp_avail_init(struct uwb_rc *rc)
+{
+ bitmap_fill(rc->drp_avail.global, UWB_NUM_MAS);
+ bitmap_fill(rc->drp_avail.local, UWB_NUM_MAS);
+ bitmap_fill(rc->drp_avail.pending, UWB_NUM_MAS);
+}
+
+/*
+ * Determine MAS available for new local reservations.
+ *
+ * avail = global & local & pending
+ */
+void uwb_drp_available(struct uwb_rc *rc, struct uwb_mas_bm *avail)
+{
+ bitmap_and(avail->bm, rc->drp_avail.global, rc->drp_avail.local, UWB_NUM_MAS);
+ bitmap_and(avail->bm, avail->bm, rc->drp_avail.pending, UWB_NUM_MAS);
+}
+
+/**
+ * uwb_drp_avail_reserve_pending - reserve MAS for a new reservation
+ * @rc: the radio controller
+ * @mas: the MAS to reserve
+ *
+ * Returns 0 on success, or -EBUSY if the MAS requested aren't available.
+ */
+int uwb_drp_avail_reserve_pending(struct uwb_rc *rc, struct uwb_mas_bm *mas)
+{
+ struct uwb_mas_bm avail;
+
+ uwb_drp_available(rc, &avail);
+ if (!bitmap_subset(mas->bm, avail.bm, UWB_NUM_MAS))
+ return -EBUSY;
+
+ bitmap_andnot(rc->drp_avail.pending, rc->drp_avail.pending, mas->bm, UWB_NUM_MAS);
+ return 0;
+}
+
+/**
+ * uwb_drp_avail_reserve - reserve MAS for an established reservation
+ * @rc: the radio controller
+ * @mas: the MAS to reserve
+ */
+void uwb_drp_avail_reserve(struct uwb_rc *rc, struct uwb_mas_bm *mas)
+{
+ bitmap_or(rc->drp_avail.pending, rc->drp_avail.pending, mas->bm, UWB_NUM_MAS);
+ bitmap_andnot(rc->drp_avail.local, rc->drp_avail.local, mas->bm, UWB_NUM_MAS);
+ rc->drp_avail.ie_valid = false;
+}
+
+/**
+ * uwb_drp_avail_release - release MAS from a pending or established reservation
+ * @rc: the radio controller
+ * @mas: the MAS to release
+ */
+void uwb_drp_avail_release(struct uwb_rc *rc, struct uwb_mas_bm *mas)
+{
+ bitmap_or(rc->drp_avail.local, rc->drp_avail.local, mas->bm, UWB_NUM_MAS);
+ bitmap_or(rc->drp_avail.pending, rc->drp_avail.pending, mas->bm, UWB_NUM_MAS);
+ rc->drp_avail.ie_valid = false;
+ uwb_rsv_handle_drp_avail_change(rc);
+}
+
+/**
+ * uwb_drp_avail_ie_update - update the DRP Availability IE
+ * @rc: the radio controller
+ *
+ * avail = global & local
+ */
+void uwb_drp_avail_ie_update(struct uwb_rc *rc)
+{
+ struct uwb_mas_bm avail;
+
+ bitmap_and(avail.bm, rc->drp_avail.global, rc->drp_avail.local, UWB_NUM_MAS);
+
+ rc->drp_avail.ie.hdr.element_id = UWB_IE_DRP_AVAILABILITY;
+ rc->drp_avail.ie.hdr.length = UWB_NUM_MAS / 8;
+ uwb_mas_bm_copy_le(rc->drp_avail.ie.bmp, &avail);
+ rc->drp_avail.ie_valid = true;
+}
+
+/**
+ * Create an unsigned long from a buffer containing a byte stream.
+ *
+ * @array: pointer to buffer
+ * @itr: index of buffer from where we start
+ * @len: the buffer's remaining size may not be exact multiple of
+ * sizeof(unsigned long), @len is the length of buffer that needs
+ * to be converted. This will be sizeof(unsigned long) or smaller
+ * (BUG if not). If it is smaller then we will pad the remaining
+ * space of the result with zeroes.
+ */
+static
+unsigned long get_val(u8 *array, size_t itr, size_t len)
+{
+ unsigned long val = 0;
+ size_t top = itr + len;
+
+ BUG_ON(len > sizeof(val));
+
+ while (itr < top) {
+ val <<= 8;
+ val |= array[top - 1];
+ top--;
+ }
+ val <<= 8 * (sizeof(val) - len); /* padding */
+ return val;
+}
+
+/**
+ * Initialize bitmap from data buffer.
+ *
+ * The bitmap to be converted could come from a IE, for example a
+ * DRP Availability IE.
+ * From ECMA-368 1.0 [16.8.7]: "
+ * octets: 1 1 N * (0 to 32)
+ * Element ID Length (=N) DRP Availability Bitmap
+ *
+ * The DRP Availability Bitmap field is up to 256 bits long, one
+ * bit for each MAS in the superframe, where the least-significant
+ * bit of the field corresponds to the first MAS in the superframe
+ * and successive bits correspond to successive MASs."
+ *
+ * The DRP Availability bitmap is in octets from 0 to 32, so octet
+ * 32 contains bits for MAS 1-8, etc. If the bitmap is smaller than 32
+ * octets, the bits in octets not included at the end of the bitmap are
+ * treated as zero. In this case (when the bitmap is smaller than 32
+ * octets) the MAS represented range from MAS 1 to MAS (size of bitmap)
+ * with the last octet still containing bits for MAS 1-8, etc.
+ *
+ * For example:
+ * F00F0102 03040506 0708090A 0B0C0D0E 0F010203
+ * ^^^^
+ * ||||
+ * ||||
+ * |||\LSB of byte is MAS 9
+ * ||\MSB of byte is MAS 16
+ * |\LSB of first byte is MAS 1
+ * \ MSB of byte is MAS 8
+ *
+ * An example of this encoding can be found in ECMA-368 Annex-D [Table D.11]
+ *
+ * The resulting bitmap will have the following mapping:
+ * bit position 0 == MAS 1
+ * bit position 1 == MAS 2
+ * ...
+ * bit position (UWB_NUM_MAS - 1) == MAS UWB_NUM_MAS
+ *
+ * @bmp_itr: pointer to bitmap (can be declared with DECLARE_BITMAP)
+ * @buffer: pointer to buffer containing bitmap data in big endian
+ * format (MSB first)
+ * @buffer_size:number of bytes with which bitmap should be initialized
+ */
+static
+void buffer_to_bmp(unsigned long *bmp_itr, void *_buffer,
+ size_t buffer_size)
+{
+ u8 *buffer = _buffer;
+ size_t itr, len;
+ unsigned long val;
+
+ itr = 0;
+ while (itr < buffer_size) {
+ len = buffer_size - itr >= sizeof(val) ?
+ sizeof(val) : buffer_size - itr;
+ val = get_val(buffer, itr, len);
+ bmp_itr[itr / sizeof(val)] = val;
+ itr += sizeof(val);
+ }
+}
+
+
+/**
+ * Extract DRP Availability bitmap from the notification.
+ *
+ * The notification that comes in contains a bitmap of (UWB_NUM_MAS / 8) bytes
+ * We convert that to our internal representation.
+ */
+static
+int uwbd_evt_get_drp_avail(struct uwb_event *evt, unsigned long *bmp)
+{
+ struct device *dev = &evt->rc->uwb_dev.dev;
+ struct uwb_rc_evt_drp_avail *drp_evt;
+ int result = -EINVAL;
+
+ /* Is there enough data to decode the event? */
+ if (evt->notif.size < sizeof(*drp_evt)) {
+ dev_err(dev, "DRP Availability Change: Not enough "
+ "data to decode event [%zu bytes, %zu "
+ "needed]\n", evt->notif.size, sizeof(*drp_evt));
+ goto error;
+ }
+ drp_evt = container_of(evt->notif.rceb, struct uwb_rc_evt_drp_avail, rceb);
+ buffer_to_bmp(bmp, drp_evt->bmp, UWB_NUM_MAS/8);
+ result = 0;
+error:
+ return result;
+}
+
+
+/**
+ * Process an incoming DRP Availability notification.
+ *
+ * @evt: Event information (packs the actual event data, which
+ * radio controller it came to, etc).
+ *
+ * @returns: 0 on success (so uwbd() frees the event buffer), < 0
+ * on error.
+ *
+ * According to ECMA-368 1.0 [16.8.7], bits set to ONE indicate that
+ * the MAS slot is available, bits set to ZERO indicate that the slot
+ * is busy.
+ *
+ * So we clear available slots, we set used slots :)
+ *
+ * The notification only marks non-availability based on the BP and
+ * received DRP IEs that are not for this radio controller. A copy of
+ * this bitmap is needed to generate the real availability (which
+ * includes local and pending reservations).
+ *
+ * The DRP Availability IE that this radio controller emits will need
+ * to be updated.
+ */
+int uwbd_evt_handle_rc_drp_avail(struct uwb_event *evt)
+{
+ int result;
+ struct uwb_rc *rc = evt->rc;
+ DECLARE_BITMAP(bmp, UWB_NUM_MAS);
+
+ result = uwbd_evt_get_drp_avail(evt, bmp);
+ if (result < 0)
+ return result;
+
+ mutex_lock(&rc->rsvs_mutex);
+ bitmap_copy(rc->drp_avail.global, bmp, UWB_NUM_MAS);
+ rc->drp_avail.ie_valid = false;
+ uwb_rsv_handle_drp_avail_change(rc);
+ mutex_unlock(&rc->rsvs_mutex);
+
+ uwb_rsv_sched_update(rc);
+
+ return 0;
+}
diff --git a/drivers/uwb/drp-ie.c b/drivers/uwb/drp-ie.c
new file mode 100644
index 000000000..b7d4f6b75
--- /dev/null
+++ b/drivers/uwb/drp-ie.c
@@ -0,0 +1,318 @@
+/*
+ * UWB DRP IE management.
+ *
+ * Copyright (C) 2005-2006 Intel Corporation
+ * Copyright (C) 2008 Cambridge Silicon Radio Ltd.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+#include <linux/kernel.h>
+#include <linux/random.h>
+#include <linux/slab.h>
+#include <linux/uwb.h>
+
+#include "uwb-internal.h"
+
+
+/*
+ * Return the reason code for a reservations's DRP IE.
+ */
+static int uwb_rsv_reason_code(struct uwb_rsv *rsv)
+{
+ static const int reason_codes[] = {
+ [UWB_RSV_STATE_O_INITIATED] = UWB_DRP_REASON_ACCEPTED,
+ [UWB_RSV_STATE_O_PENDING] = UWB_DRP_REASON_ACCEPTED,
+ [UWB_RSV_STATE_O_MODIFIED] = UWB_DRP_REASON_MODIFIED,
+ [UWB_RSV_STATE_O_ESTABLISHED] = UWB_DRP_REASON_ACCEPTED,
+ [UWB_RSV_STATE_O_TO_BE_MOVED] = UWB_DRP_REASON_ACCEPTED,
+ [UWB_RSV_STATE_O_MOVE_COMBINING] = UWB_DRP_REASON_MODIFIED,
+ [UWB_RSV_STATE_O_MOVE_REDUCING] = UWB_DRP_REASON_MODIFIED,
+ [UWB_RSV_STATE_O_MOVE_EXPANDING] = UWB_DRP_REASON_ACCEPTED,
+ [UWB_RSV_STATE_T_ACCEPTED] = UWB_DRP_REASON_ACCEPTED,
+ [UWB_RSV_STATE_T_CONFLICT] = UWB_DRP_REASON_CONFLICT,
+ [UWB_RSV_STATE_T_PENDING] = UWB_DRP_REASON_PENDING,
+ [UWB_RSV_STATE_T_DENIED] = UWB_DRP_REASON_DENIED,
+ [UWB_RSV_STATE_T_RESIZED] = UWB_DRP_REASON_ACCEPTED,
+ [UWB_RSV_STATE_T_EXPANDING_ACCEPTED] = UWB_DRP_REASON_ACCEPTED,
+ [UWB_RSV_STATE_T_EXPANDING_CONFLICT] = UWB_DRP_REASON_CONFLICT,
+ [UWB_RSV_STATE_T_EXPANDING_PENDING] = UWB_DRP_REASON_PENDING,
+ [UWB_RSV_STATE_T_EXPANDING_DENIED] = UWB_DRP_REASON_DENIED,
+ };
+
+ return reason_codes[rsv->state];
+}
+
+/*
+ * Return the reason code for a reservations's companion DRP IE .
+ */
+static int uwb_rsv_companion_reason_code(struct uwb_rsv *rsv)
+{
+ static const int companion_reason_codes[] = {
+ [UWB_RSV_STATE_O_MOVE_EXPANDING] = UWB_DRP_REASON_ACCEPTED,
+ [UWB_RSV_STATE_T_EXPANDING_ACCEPTED] = UWB_DRP_REASON_ACCEPTED,
+ [UWB_RSV_STATE_T_EXPANDING_CONFLICT] = UWB_DRP_REASON_CONFLICT,
+ [UWB_RSV_STATE_T_EXPANDING_PENDING] = UWB_DRP_REASON_PENDING,
+ [UWB_RSV_STATE_T_EXPANDING_DENIED] = UWB_DRP_REASON_DENIED,
+ };
+
+ return companion_reason_codes[rsv->state];
+}
+
+/*
+ * Return the status bit for a reservations's DRP IE.
+ */
+int uwb_rsv_status(struct uwb_rsv *rsv)
+{
+ static const int statuses[] = {
+ [UWB_RSV_STATE_O_INITIATED] = 0,
+ [UWB_RSV_STATE_O_PENDING] = 0,
+ [UWB_RSV_STATE_O_MODIFIED] = 1,
+ [UWB_RSV_STATE_O_ESTABLISHED] = 1,
+ [UWB_RSV_STATE_O_TO_BE_MOVED] = 0,
+ [UWB_RSV_STATE_O_MOVE_COMBINING] = 1,
+ [UWB_RSV_STATE_O_MOVE_REDUCING] = 1,
+ [UWB_RSV_STATE_O_MOVE_EXPANDING] = 1,
+ [UWB_RSV_STATE_T_ACCEPTED] = 1,
+ [UWB_RSV_STATE_T_CONFLICT] = 0,
+ [UWB_RSV_STATE_T_PENDING] = 0,
+ [UWB_RSV_STATE_T_DENIED] = 0,
+ [UWB_RSV_STATE_T_RESIZED] = 1,
+ [UWB_RSV_STATE_T_EXPANDING_ACCEPTED] = 1,
+ [UWB_RSV_STATE_T_EXPANDING_CONFLICT] = 1,
+ [UWB_RSV_STATE_T_EXPANDING_PENDING] = 1,
+ [UWB_RSV_STATE_T_EXPANDING_DENIED] = 1,
+
+ };
+
+ return statuses[rsv->state];
+}
+
+/*
+ * Return the status bit for a reservations's companion DRP IE .
+ */
+int uwb_rsv_companion_status(struct uwb_rsv *rsv)
+{
+ static const int companion_statuses[] = {
+ [UWB_RSV_STATE_O_MOVE_EXPANDING] = 0,
+ [UWB_RSV_STATE_T_EXPANDING_ACCEPTED] = 1,
+ [UWB_RSV_STATE_T_EXPANDING_CONFLICT] = 0,
+ [UWB_RSV_STATE_T_EXPANDING_PENDING] = 0,
+ [UWB_RSV_STATE_T_EXPANDING_DENIED] = 0,
+ };
+
+ return companion_statuses[rsv->state];
+}
+
+/*
+ * Allocate a DRP IE.
+ *
+ * To save having to free/allocate a DRP IE when its MAS changes,
+ * enough memory is allocated for the maxiumum number of DRP
+ * allocation fields. This gives an overhead per reservation of up to
+ * (UWB_NUM_ZONES - 1) * 4 = 60 octets.
+ */
+static struct uwb_ie_drp *uwb_drp_ie_alloc(void)
+{
+ struct uwb_ie_drp *drp_ie;
+
+ drp_ie = kzalloc(sizeof(struct uwb_ie_drp) +
+ UWB_NUM_ZONES * sizeof(struct uwb_drp_alloc),
+ GFP_KERNEL);
+ if (drp_ie) {
+ drp_ie->hdr.element_id = UWB_IE_DRP;
+ }
+ return drp_ie;
+}
+
+
+/*
+ * Fill a DRP IE's allocation fields from a MAS bitmap.
+ */
+static void uwb_drp_ie_from_bm(struct uwb_ie_drp *drp_ie,
+ struct uwb_mas_bm *mas)
+{
+ int z, i, num_fields = 0, next = 0;
+ struct uwb_drp_alloc *zones;
+ __le16 current_bmp;
+ DECLARE_BITMAP(tmp_bmp, UWB_NUM_MAS);
+ DECLARE_BITMAP(tmp_mas_bm, UWB_MAS_PER_ZONE);
+
+ zones = drp_ie->allocs;
+
+ bitmap_copy(tmp_bmp, mas->bm, UWB_NUM_MAS);
+
+ /* Determine unique MAS bitmaps in zones from bitmap. */
+ for (z = 0; z < UWB_NUM_ZONES; z++) {
+ bitmap_copy(tmp_mas_bm, tmp_bmp, UWB_MAS_PER_ZONE);
+ if (bitmap_weight(tmp_mas_bm, UWB_MAS_PER_ZONE) > 0) {
+ bool found = false;
+ current_bmp = (__le16) *tmp_mas_bm;
+ for (i = 0; i < next; i++) {
+ if (current_bmp == zones[i].mas_bm) {
+ zones[i].zone_bm |= 1 << z;
+ found = true;
+ break;
+ }
+ }
+ if (!found) {
+ num_fields++;
+ zones[next].zone_bm = 1 << z;
+ zones[next].mas_bm = current_bmp;
+ next++;
+ }
+ }
+ bitmap_shift_right(tmp_bmp, tmp_bmp, UWB_MAS_PER_ZONE, UWB_NUM_MAS);
+ }
+
+ /* Store in format ready for transmission (le16). */
+ for (i = 0; i < num_fields; i++) {
+ drp_ie->allocs[i].zone_bm = cpu_to_le16(zones[i].zone_bm);
+ drp_ie->allocs[i].mas_bm = cpu_to_le16(zones[i].mas_bm);
+ }
+
+ drp_ie->hdr.length = sizeof(struct uwb_ie_drp) - sizeof(struct uwb_ie_hdr)
+ + num_fields * sizeof(struct uwb_drp_alloc);
+}
+
+/**
+ * uwb_drp_ie_update - update a reservation's DRP IE
+ * @rsv: the reservation
+ */
+int uwb_drp_ie_update(struct uwb_rsv *rsv)
+{
+ struct uwb_ie_drp *drp_ie;
+ struct uwb_rsv_move *mv;
+ int unsafe;
+
+ if (rsv->state == UWB_RSV_STATE_NONE) {
+ kfree(rsv->drp_ie);
+ rsv->drp_ie = NULL;
+ return 0;
+ }
+
+ unsafe = rsv->mas.unsafe ? 1 : 0;
+
+ if (rsv->drp_ie == NULL) {
+ rsv->drp_ie = uwb_drp_ie_alloc();
+ if (rsv->drp_ie == NULL)
+ return -ENOMEM;
+ }
+ drp_ie = rsv->drp_ie;
+
+ uwb_ie_drp_set_unsafe(drp_ie, unsafe);
+ uwb_ie_drp_set_tiebreaker(drp_ie, rsv->tiebreaker);
+ uwb_ie_drp_set_owner(drp_ie, uwb_rsv_is_owner(rsv));
+ uwb_ie_drp_set_status(drp_ie, uwb_rsv_status(rsv));
+ uwb_ie_drp_set_reason_code(drp_ie, uwb_rsv_reason_code(rsv));
+ uwb_ie_drp_set_stream_index(drp_ie, rsv->stream);
+ uwb_ie_drp_set_type(drp_ie, rsv->type);
+
+ if (uwb_rsv_is_owner(rsv)) {
+ switch (rsv->target.type) {
+ case UWB_RSV_TARGET_DEV:
+ drp_ie->dev_addr = rsv->target.dev->dev_addr;
+ break;
+ case UWB_RSV_TARGET_DEVADDR:
+ drp_ie->dev_addr = rsv->target.devaddr;
+ break;
+ }
+ } else
+ drp_ie->dev_addr = rsv->owner->dev_addr;
+
+ uwb_drp_ie_from_bm(drp_ie, &rsv->mas);
+
+ if (uwb_rsv_has_two_drp_ies(rsv)) {
+ mv = &rsv->mv;
+ if (mv->companion_drp_ie == NULL) {
+ mv->companion_drp_ie = uwb_drp_ie_alloc();
+ if (mv->companion_drp_ie == NULL)
+ return -ENOMEM;
+ }
+ drp_ie = mv->companion_drp_ie;
+
+ /* keep all the same configuration of the main drp_ie */
+ memcpy(drp_ie, rsv->drp_ie, sizeof(struct uwb_ie_drp));
+
+
+ /* FIXME: handle properly the unsafe bit */
+ uwb_ie_drp_set_unsafe(drp_ie, 1);
+ uwb_ie_drp_set_status(drp_ie, uwb_rsv_companion_status(rsv));
+ uwb_ie_drp_set_reason_code(drp_ie, uwb_rsv_companion_reason_code(rsv));
+
+ uwb_drp_ie_from_bm(drp_ie, &mv->companion_mas);
+ }
+
+ rsv->ie_valid = true;
+ return 0;
+}
+
+/*
+ * Set MAS bits from given MAS bitmap in a single zone of large bitmap.
+ *
+ * We are given a zone id and the MAS bitmap of bits that need to be set in
+ * this zone. Note that this zone may already have bits set and this only
+ * adds settings - we cannot simply assign the MAS bitmap contents to the
+ * zone contents. We iterate over the the bits (MAS) in the zone and set the
+ * bits that are set in the given MAS bitmap.
+ */
+static
+void uwb_drp_ie_single_zone_to_bm(struct uwb_mas_bm *bm, u8 zone, u16 mas_bm)
+{
+ int mas;
+ u16 mas_mask;
+
+ for (mas = 0; mas < UWB_MAS_PER_ZONE; mas++) {
+ mas_mask = 1 << mas;
+ if (mas_bm & mas_mask)
+ set_bit(zone * UWB_NUM_ZONES + mas, bm->bm);
+ }
+}
+
+/**
+ * uwb_drp_ie_zones_to_bm - convert DRP allocation fields to a bitmap
+ * @mas: MAS bitmap that will be populated to correspond to the
+ * allocation fields in the DRP IE
+ * @drp_ie: the DRP IE that contains the allocation fields.
+ *
+ * The input format is an array of MAS allocation fields (16 bit Zone
+ * bitmap, 16 bit MAS bitmap) as described in [ECMA-368] section
+ * 16.8.6. The output is a full 256 bit MAS bitmap.
+ *
+ * We go over all the allocation fields, for each allocation field we
+ * know which zones are impacted. We iterate over all the zones
+ * impacted and call a function that will set the correct MAS bits in
+ * each zone.
+ */
+void uwb_drp_ie_to_bm(struct uwb_mas_bm *bm, const struct uwb_ie_drp *drp_ie)
+{
+ int numallocs = (drp_ie->hdr.length - 4) / 4;
+ const struct uwb_drp_alloc *alloc;
+ int cnt;
+ u16 zone_bm, mas_bm;
+ u8 zone;
+ u16 zone_mask;
+
+ bitmap_zero(bm->bm, UWB_NUM_MAS);
+
+ for (cnt = 0; cnt < numallocs; cnt++) {
+ alloc = &drp_ie->allocs[cnt];
+ zone_bm = le16_to_cpu(alloc->zone_bm);
+ mas_bm = le16_to_cpu(alloc->mas_bm);
+ for (zone = 0; zone < UWB_NUM_ZONES; zone++) {
+ zone_mask = 1 << zone;
+ if (zone_bm & zone_mask)
+ uwb_drp_ie_single_zone_to_bm(bm, zone, mas_bm);
+ }
+ }
+}
+
diff --git a/drivers/uwb/drp.c b/drivers/uwb/drp.c
new file mode 100644
index 000000000..8fc1b787d
--- /dev/null
+++ b/drivers/uwb/drp.c
@@ -0,0 +1,855 @@
+/*
+ * Ultra Wide Band
+ * Dynamic Reservation Protocol handling
+ *
+ * Copyright (C) 2005-2006 Intel Corporation
+ * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
+ * Copyright (C) 2008 Cambridge Silicon Radio Ltd.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+#include <linux/kthread.h>
+#include <linux/freezer.h>
+#include <linux/slab.h>
+#include <linux/delay.h>
+#include "uwb-internal.h"
+
+
+/* DRP Conflict Actions ([ECMA-368 2nd Edition] 17.4.6) */
+enum uwb_drp_conflict_action {
+ /* Reservation is maintained, no action needed */
+ UWB_DRP_CONFLICT_MANTAIN = 0,
+
+ /* the device shall not transmit frames in conflicting MASs in
+ * the following superframe. If the device is the reservation
+ * target, it shall also set the Reason Code in its DRP IE to
+ * Conflict in its beacon in the following superframe.
+ */
+ UWB_DRP_CONFLICT_ACT1,
+
+ /* the device shall not set the Reservation Status bit to ONE
+ * and shall not transmit frames in conflicting MASs. If the
+ * device is the reservation target, it shall also set the
+ * Reason Code in its DRP IE to Conflict.
+ */
+ UWB_DRP_CONFLICT_ACT2,
+
+ /* the device shall not transmit frames in conflicting MASs in
+ * the following superframe. It shall remove the conflicting
+ * MASs from the reservation or set the Reservation Status to
+ * ZERO in its beacon in the following superframe. If the
+ * device is the reservation target, it shall also set the
+ * Reason Code in its DRP IE to Conflict.
+ */
+ UWB_DRP_CONFLICT_ACT3,
+};
+
+
+static void uwb_rc_set_drp_cmd_done(struct uwb_rc *rc, void *arg,
+ struct uwb_rceb *reply, ssize_t reply_size)
+{
+ struct uwb_rc_evt_set_drp_ie *r = (struct uwb_rc_evt_set_drp_ie *)reply;
+ unsigned long flags;
+
+ if (r != NULL) {
+ if (r->bResultCode != UWB_RC_RES_SUCCESS)
+ dev_err(&rc->uwb_dev.dev, "SET-DRP-IE failed: %s (%d)\n",
+ uwb_rc_strerror(r->bResultCode), r->bResultCode);
+ } else
+ dev_err(&rc->uwb_dev.dev, "SET-DRP-IE: timeout\n");
+
+ spin_lock_irqsave(&rc->rsvs_lock, flags);
+ if (rc->set_drp_ie_pending > 1) {
+ rc->set_drp_ie_pending = 0;
+ uwb_rsv_queue_update(rc);
+ } else {
+ rc->set_drp_ie_pending = 0;
+ }
+ spin_unlock_irqrestore(&rc->rsvs_lock, flags);
+}
+
+/**
+ * Construct and send the SET DRP IE
+ *
+ * @rc: UWB Host controller
+ * @returns: >= 0 number of bytes still available in the beacon
+ * < 0 errno code on error.
+ *
+ * See WUSB[8.6.2.7]: The host must set all the DRP IEs that it wants the
+ * device to include in its beacon at the same time. We thus have to
+ * traverse all reservations and include the DRP IEs of all PENDING
+ * and NEGOTIATED reservations in a SET DRP command for transmission.
+ *
+ * A DRP Availability IE is appended.
+ *
+ * rc->rsvs_mutex is held
+ *
+ * FIXME We currently ignore the returned value indicating the remaining space
+ * in beacon. This could be used to deny reservation requests earlier if
+ * determined that they would cause the beacon space to be exceeded.
+ */
+int uwb_rc_send_all_drp_ie(struct uwb_rc *rc)
+{
+ int result;
+ struct uwb_rc_cmd_set_drp_ie *cmd;
+ struct uwb_rsv *rsv;
+ struct uwb_rsv_move *mv;
+ int num_bytes = 0;
+ u8 *IEDataptr;
+
+ result = -ENOMEM;
+ /* First traverse all reservations to determine memory needed. */
+ list_for_each_entry(rsv, &rc->reservations, rc_node) {
+ if (rsv->drp_ie != NULL) {
+ num_bytes += rsv->drp_ie->hdr.length + 2;
+ if (uwb_rsv_has_two_drp_ies(rsv) &&
+ (rsv->mv.companion_drp_ie != NULL)) {
+ mv = &rsv->mv;
+ num_bytes +=
+ mv->companion_drp_ie->hdr.length + 2;
+ }
+ }
+ }
+ num_bytes += sizeof(rc->drp_avail.ie);
+ cmd = kzalloc(sizeof(*cmd) + num_bytes, GFP_KERNEL);
+ if (cmd == NULL)
+ goto error;
+ cmd->rccb.bCommandType = UWB_RC_CET_GENERAL;
+ cmd->rccb.wCommand = cpu_to_le16(UWB_RC_CMD_SET_DRP_IE);
+ cmd->wIELength = num_bytes;
+ IEDataptr = (u8 *)&cmd->IEData[0];
+
+ /* FIXME: DRV avail IE is not always needed */
+ /* put DRP avail IE first */
+ memcpy(IEDataptr, &rc->drp_avail.ie, sizeof(rc->drp_avail.ie));
+ IEDataptr += sizeof(struct uwb_ie_drp_avail);
+
+ /* Next traverse all reservations to place IEs in allocated memory. */
+ list_for_each_entry(rsv, &rc->reservations, rc_node) {
+ if (rsv->drp_ie != NULL) {
+ memcpy(IEDataptr, rsv->drp_ie,
+ rsv->drp_ie->hdr.length + 2);
+ IEDataptr += rsv->drp_ie->hdr.length + 2;
+
+ if (uwb_rsv_has_two_drp_ies(rsv) &&
+ (rsv->mv.companion_drp_ie != NULL)) {
+ mv = &rsv->mv;
+ memcpy(IEDataptr, mv->companion_drp_ie,
+ mv->companion_drp_ie->hdr.length + 2);
+ IEDataptr +=
+ mv->companion_drp_ie->hdr.length + 2;
+ }
+ }
+ }
+
+ result = uwb_rc_cmd_async(rc, "SET-DRP-IE",
+ &cmd->rccb, sizeof(*cmd) + num_bytes,
+ UWB_RC_CET_GENERAL, UWB_RC_CMD_SET_DRP_IE,
+ uwb_rc_set_drp_cmd_done, NULL);
+
+ rc->set_drp_ie_pending = 1;
+
+ kfree(cmd);
+error:
+ return result;
+}
+
+/*
+ * Evaluate the action to perform using conflict resolution rules
+ *
+ * Return a uwb_drp_conflict_action.
+ */
+static int evaluate_conflict_action(struct uwb_ie_drp *ext_drp_ie, int ext_beacon_slot,
+ struct uwb_rsv *rsv, int our_status)
+{
+ int our_tie_breaker = rsv->tiebreaker;
+ int our_type = rsv->type;
+ int our_beacon_slot = rsv->rc->uwb_dev.beacon_slot;
+
+ int ext_tie_breaker = uwb_ie_drp_tiebreaker(ext_drp_ie);
+ int ext_status = uwb_ie_drp_status(ext_drp_ie);
+ int ext_type = uwb_ie_drp_type(ext_drp_ie);
+
+
+ /* [ECMA-368 2nd Edition] 17.4.6 */
+ if (ext_type == UWB_DRP_TYPE_PCA && our_type == UWB_DRP_TYPE_PCA) {
+ return UWB_DRP_CONFLICT_MANTAIN;
+ }
+
+ /* [ECMA-368 2nd Edition] 17.4.6-1 */
+ if (our_type == UWB_DRP_TYPE_ALIEN_BP) {
+ return UWB_DRP_CONFLICT_MANTAIN;
+ }
+
+ /* [ECMA-368 2nd Edition] 17.4.6-2 */
+ if (ext_type == UWB_DRP_TYPE_ALIEN_BP) {
+ /* here we know our_type != UWB_DRP_TYPE_ALIEN_BP */
+ return UWB_DRP_CONFLICT_ACT1;
+ }
+
+ /* [ECMA-368 2nd Edition] 17.4.6-3 */
+ if (our_status == 0 && ext_status == 1) {
+ return UWB_DRP_CONFLICT_ACT2;
+ }
+
+ /* [ECMA-368 2nd Edition] 17.4.6-4 */
+ if (our_status == 1 && ext_status == 0) {
+ return UWB_DRP_CONFLICT_MANTAIN;
+ }
+
+ /* [ECMA-368 2nd Edition] 17.4.6-5a */
+ if (our_tie_breaker == ext_tie_breaker &&
+ our_beacon_slot < ext_beacon_slot) {
+ return UWB_DRP_CONFLICT_MANTAIN;
+ }
+
+ /* [ECMA-368 2nd Edition] 17.4.6-5b */
+ if (our_tie_breaker != ext_tie_breaker &&
+ our_beacon_slot > ext_beacon_slot) {
+ return UWB_DRP_CONFLICT_MANTAIN;
+ }
+
+ if (our_status == 0) {
+ if (our_tie_breaker == ext_tie_breaker) {
+ /* [ECMA-368 2nd Edition] 17.4.6-6a */
+ if (our_beacon_slot > ext_beacon_slot) {
+ return UWB_DRP_CONFLICT_ACT2;
+ }
+ } else {
+ /* [ECMA-368 2nd Edition] 17.4.6-6b */
+ if (our_beacon_slot < ext_beacon_slot) {
+ return UWB_DRP_CONFLICT_ACT2;
+ }
+ }
+ } else {
+ if (our_tie_breaker == ext_tie_breaker) {
+ /* [ECMA-368 2nd Edition] 17.4.6-7a */
+ if (our_beacon_slot > ext_beacon_slot) {
+ return UWB_DRP_CONFLICT_ACT3;
+ }
+ } else {
+ /* [ECMA-368 2nd Edition] 17.4.6-7b */
+ if (our_beacon_slot < ext_beacon_slot) {
+ return UWB_DRP_CONFLICT_ACT3;
+ }
+ }
+ }
+ return UWB_DRP_CONFLICT_MANTAIN;
+}
+
+static void handle_conflict_normal(struct uwb_ie_drp *drp_ie,
+ int ext_beacon_slot,
+ struct uwb_rsv *rsv,
+ struct uwb_mas_bm *conflicting_mas)
+{
+ struct uwb_rc *rc = rsv->rc;
+ struct uwb_rsv_move *mv = &rsv->mv;
+ struct uwb_drp_backoff_win *bow = &rc->bow;
+ int action;
+
+ action = evaluate_conflict_action(drp_ie, ext_beacon_slot, rsv, uwb_rsv_status(rsv));
+
+ if (uwb_rsv_is_owner(rsv)) {
+ switch(action) {
+ case UWB_DRP_CONFLICT_ACT2:
+ /* try move */
+ uwb_rsv_set_state(rsv, UWB_RSV_STATE_O_TO_BE_MOVED);
+ if (bow->can_reserve_extra_mases == false)
+ uwb_rsv_backoff_win_increment(rc);
+
+ break;
+ case UWB_DRP_CONFLICT_ACT3:
+ uwb_rsv_backoff_win_increment(rc);
+ /* drop some mases with reason modified */
+ /* put in the companion the mases to be dropped */
+ bitmap_and(mv->companion_mas.bm, rsv->mas.bm, conflicting_mas->bm, UWB_NUM_MAS);
+ uwb_rsv_set_state(rsv, UWB_RSV_STATE_O_MODIFIED);
+ default:
+ break;
+ }
+ } else {
+ switch(action) {
+ case UWB_DRP_CONFLICT_ACT2:
+ case UWB_DRP_CONFLICT_ACT3:
+ uwb_rsv_set_state(rsv, UWB_RSV_STATE_T_CONFLICT);
+ default:
+ break;
+ }
+
+ }
+
+}
+
+static void handle_conflict_expanding(struct uwb_ie_drp *drp_ie, int ext_beacon_slot,
+ struct uwb_rsv *rsv, bool companion_only,
+ struct uwb_mas_bm *conflicting_mas)
+{
+ struct uwb_rc *rc = rsv->rc;
+ struct uwb_drp_backoff_win *bow = &rc->bow;
+ struct uwb_rsv_move *mv = &rsv->mv;
+ int action;
+
+ if (companion_only) {
+ /* status of companion is 0 at this point */
+ action = evaluate_conflict_action(drp_ie, ext_beacon_slot, rsv, 0);
+ if (uwb_rsv_is_owner(rsv)) {
+ switch(action) {
+ case UWB_DRP_CONFLICT_ACT2:
+ case UWB_DRP_CONFLICT_ACT3:
+ uwb_rsv_set_state(rsv,
+ UWB_RSV_STATE_O_ESTABLISHED);
+ rsv->needs_release_companion_mas = false;
+ if (bow->can_reserve_extra_mases == false)
+ uwb_rsv_backoff_win_increment(rc);
+ uwb_drp_avail_release(rsv->rc,
+ &rsv->mv.companion_mas);
+ }
+ } else { /* rsv is target */
+ switch(action) {
+ case UWB_DRP_CONFLICT_ACT2:
+ case UWB_DRP_CONFLICT_ACT3:
+ uwb_rsv_set_state(rsv,
+ UWB_RSV_STATE_T_EXPANDING_CONFLICT);
+ /* send_drp_avail_ie = true; */
+ }
+ }
+ } else { /* also base part of the reservation is conflicting */
+ if (uwb_rsv_is_owner(rsv)) {
+ uwb_rsv_backoff_win_increment(rc);
+ /* remove companion part */
+ uwb_drp_avail_release(rsv->rc, &rsv->mv.companion_mas);
+
+ /* drop some mases with reason modified */
+
+ /* put in the companion the mases to be dropped */
+ bitmap_andnot(mv->companion_mas.bm, rsv->mas.bm,
+ conflicting_mas->bm, UWB_NUM_MAS);
+ uwb_rsv_set_state(rsv, UWB_RSV_STATE_O_MODIFIED);
+ } else { /* it is a target rsv */
+ uwb_rsv_set_state(rsv, UWB_RSV_STATE_T_CONFLICT);
+ /* send_drp_avail_ie = true; */
+ }
+ }
+}
+
+static void uwb_drp_handle_conflict_rsv(struct uwb_rc *rc, struct uwb_rsv *rsv,
+ struct uwb_rc_evt_drp *drp_evt,
+ struct uwb_ie_drp *drp_ie,
+ struct uwb_mas_bm *conflicting_mas)
+{
+ struct uwb_rsv_move *mv;
+
+ /* check if the conflicting reservation has two drp_ies */
+ if (uwb_rsv_has_two_drp_ies(rsv)) {
+ mv = &rsv->mv;
+ if (bitmap_intersects(rsv->mas.bm, conflicting_mas->bm,
+ UWB_NUM_MAS)) {
+ handle_conflict_expanding(drp_ie,
+ drp_evt->beacon_slot_number,
+ rsv, false, conflicting_mas);
+ } else {
+ if (bitmap_intersects(mv->companion_mas.bm,
+ conflicting_mas->bm, UWB_NUM_MAS)) {
+ handle_conflict_expanding(
+ drp_ie, drp_evt->beacon_slot_number,
+ rsv, true, conflicting_mas);
+ }
+ }
+ } else if (bitmap_intersects(rsv->mas.bm, conflicting_mas->bm,
+ UWB_NUM_MAS)) {
+ handle_conflict_normal(drp_ie, drp_evt->beacon_slot_number,
+ rsv, conflicting_mas);
+ }
+}
+
+static void uwb_drp_handle_all_conflict_rsv(struct uwb_rc *rc,
+ struct uwb_rc_evt_drp *drp_evt,
+ struct uwb_ie_drp *drp_ie,
+ struct uwb_mas_bm *conflicting_mas)
+{
+ struct uwb_rsv *rsv;
+
+ list_for_each_entry(rsv, &rc->reservations, rc_node) {
+ uwb_drp_handle_conflict_rsv(rc, rsv, drp_evt, drp_ie,
+ conflicting_mas);
+ }
+}
+
+static void uwb_drp_process_target_accepted(struct uwb_rc *rc,
+ struct uwb_rsv *rsv, struct uwb_rc_evt_drp *drp_evt,
+ struct uwb_ie_drp *drp_ie, struct uwb_mas_bm *mas)
+{
+ struct uwb_rsv_move *mv = &rsv->mv;
+ int status;
+
+ status = uwb_ie_drp_status(drp_ie);
+
+ if (rsv->state == UWB_RSV_STATE_T_CONFLICT) {
+ uwb_rsv_set_state(rsv, UWB_RSV_STATE_T_CONFLICT);
+ return;
+ }
+
+ if (rsv->state == UWB_RSV_STATE_T_EXPANDING_ACCEPTED) {
+ /* drp_ie is companion */
+ if (!bitmap_equal(rsv->mas.bm, mas->bm, UWB_NUM_MAS)) {
+ /* stroke companion */
+ uwb_rsv_set_state(rsv,
+ UWB_RSV_STATE_T_EXPANDING_ACCEPTED);
+ }
+ } else {
+ if (!bitmap_equal(rsv->mas.bm, mas->bm, UWB_NUM_MAS)) {
+ if (uwb_drp_avail_reserve_pending(rc, mas) == -EBUSY) {
+ /* FIXME: there is a conflict, find
+ * the conflicting reservations and
+ * take a sensible action. Consider
+ * that in drp_ie there is the
+ * "neighbour" */
+ uwb_drp_handle_all_conflict_rsv(rc, drp_evt,
+ drp_ie, mas);
+ } else {
+ /* accept the extra reservation */
+ bitmap_copy(mv->companion_mas.bm, mas->bm,
+ UWB_NUM_MAS);
+ uwb_rsv_set_state(rsv,
+ UWB_RSV_STATE_T_EXPANDING_ACCEPTED);
+ }
+ } else {
+ if (status) {
+ uwb_rsv_set_state(rsv,
+ UWB_RSV_STATE_T_ACCEPTED);
+ }
+ }
+
+ }
+}
+
+/*
+ * Based on the DRP IE, transition a target reservation to a new
+ * state.
+ */
+static void uwb_drp_process_target(struct uwb_rc *rc, struct uwb_rsv *rsv,
+ struct uwb_ie_drp *drp_ie, struct uwb_rc_evt_drp *drp_evt)
+{
+ struct device *dev = &rc->uwb_dev.dev;
+ struct uwb_rsv_move *mv = &rsv->mv;
+ int status;
+ enum uwb_drp_reason reason_code;
+ struct uwb_mas_bm mas;
+
+ status = uwb_ie_drp_status(drp_ie);
+ reason_code = uwb_ie_drp_reason_code(drp_ie);
+ uwb_drp_ie_to_bm(&mas, drp_ie);
+
+ switch (reason_code) {
+ case UWB_DRP_REASON_ACCEPTED:
+ uwb_drp_process_target_accepted(rc, rsv, drp_evt, drp_ie, &mas);
+ break;
+
+ case UWB_DRP_REASON_MODIFIED:
+ /* check to see if we have already modified the reservation */
+ if (bitmap_equal(rsv->mas.bm, mas.bm, UWB_NUM_MAS)) {
+ uwb_rsv_set_state(rsv, UWB_RSV_STATE_T_ACCEPTED);
+ break;
+ }
+
+ /* find if the owner wants to expand or reduce */
+ if (bitmap_subset(mas.bm, rsv->mas.bm, UWB_NUM_MAS)) {
+ /* owner is reducing */
+ bitmap_andnot(mv->companion_mas.bm, rsv->mas.bm, mas.bm,
+ UWB_NUM_MAS);
+ uwb_drp_avail_release(rsv->rc, &mv->companion_mas);
+ }
+
+ bitmap_copy(rsv->mas.bm, mas.bm, UWB_NUM_MAS);
+ uwb_rsv_set_state(rsv, UWB_RSV_STATE_T_RESIZED);
+ break;
+ default:
+ dev_warn(dev, "ignoring invalid DRP IE state (%d/%d)\n",
+ reason_code, status);
+ }
+}
+
+static void uwb_drp_process_owner_accepted(struct uwb_rsv *rsv,
+ struct uwb_mas_bm *mas)
+{
+ struct uwb_rsv_move *mv = &rsv->mv;
+
+ switch (rsv->state) {
+ case UWB_RSV_STATE_O_PENDING:
+ case UWB_RSV_STATE_O_INITIATED:
+ case UWB_RSV_STATE_O_ESTABLISHED:
+ uwb_rsv_set_state(rsv, UWB_RSV_STATE_O_ESTABLISHED);
+ break;
+ case UWB_RSV_STATE_O_MODIFIED:
+ if (bitmap_equal(mas->bm, rsv->mas.bm, UWB_NUM_MAS))
+ uwb_rsv_set_state(rsv, UWB_RSV_STATE_O_ESTABLISHED);
+ else
+ uwb_rsv_set_state(rsv, UWB_RSV_STATE_O_MODIFIED);
+ break;
+
+ case UWB_RSV_STATE_O_MOVE_REDUCING: /* shouldn' t be a problem */
+ if (bitmap_equal(mas->bm, rsv->mas.bm, UWB_NUM_MAS))
+ uwb_rsv_set_state(rsv, UWB_RSV_STATE_O_ESTABLISHED);
+ else
+ uwb_rsv_set_state(rsv, UWB_RSV_STATE_O_MOVE_REDUCING);
+ break;
+ case UWB_RSV_STATE_O_MOVE_EXPANDING:
+ if (bitmap_equal(mas->bm, mv->companion_mas.bm, UWB_NUM_MAS)) {
+ /* Companion reservation accepted */
+ uwb_rsv_set_state(rsv, UWB_RSV_STATE_O_MOVE_COMBINING);
+ } else {
+ uwb_rsv_set_state(rsv, UWB_RSV_STATE_O_MOVE_EXPANDING);
+ }
+ break;
+ case UWB_RSV_STATE_O_MOVE_COMBINING:
+ if (bitmap_equal(mas->bm, rsv->mas.bm, UWB_NUM_MAS))
+ uwb_rsv_set_state(rsv, UWB_RSV_STATE_O_MOVE_REDUCING);
+ else
+ uwb_rsv_set_state(rsv, UWB_RSV_STATE_O_MOVE_COMBINING);
+ break;
+ default:
+ break;
+ }
+}
+/*
+ * Based on the DRP IE, transition an owner reservation to a new
+ * state.
+ */
+static void uwb_drp_process_owner(struct uwb_rc *rc, struct uwb_rsv *rsv,
+ struct uwb_dev *src, struct uwb_ie_drp *drp_ie,
+ struct uwb_rc_evt_drp *drp_evt)
+{
+ struct device *dev = &rc->uwb_dev.dev;
+ int status;
+ enum uwb_drp_reason reason_code;
+ struct uwb_mas_bm mas;
+
+ status = uwb_ie_drp_status(drp_ie);
+ reason_code = uwb_ie_drp_reason_code(drp_ie);
+ uwb_drp_ie_to_bm(&mas, drp_ie);
+
+ if (status) {
+ switch (reason_code) {
+ case UWB_DRP_REASON_ACCEPTED:
+ uwb_drp_process_owner_accepted(rsv, &mas);
+ break;
+ default:
+ dev_warn(dev, "ignoring invalid DRP IE state (%d/%d)\n",
+ reason_code, status);
+ }
+ } else {
+ switch (reason_code) {
+ case UWB_DRP_REASON_PENDING:
+ uwb_rsv_set_state(rsv, UWB_RSV_STATE_O_PENDING);
+ break;
+ case UWB_DRP_REASON_DENIED:
+ uwb_rsv_set_state(rsv, UWB_RSV_STATE_NONE);
+ break;
+ case UWB_DRP_REASON_CONFLICT:
+ /* resolve the conflict */
+ bitmap_complement(mas.bm, src->last_availability_bm,
+ UWB_NUM_MAS);
+ uwb_drp_handle_conflict_rsv(rc, rsv, drp_evt, drp_ie, &mas);
+ break;
+ default:
+ dev_warn(dev, "ignoring invalid DRP IE state (%d/%d)\n",
+ reason_code, status);
+ }
+ }
+}
+
+static void uwb_cnflt_alien_stroke_timer(struct uwb_cnflt_alien *cnflt)
+{
+ unsigned timeout_us = UWB_MAX_LOST_BEACONS * UWB_SUPERFRAME_LENGTH_US;
+ mod_timer(&cnflt->timer, jiffies + usecs_to_jiffies(timeout_us));
+}
+
+static void uwb_cnflt_update_work(struct work_struct *work)
+{
+ struct uwb_cnflt_alien *cnflt = container_of(work,
+ struct uwb_cnflt_alien,
+ cnflt_update_work);
+ struct uwb_cnflt_alien *c;
+ struct uwb_rc *rc = cnflt->rc;
+
+ unsigned long delay_us = UWB_MAS_LENGTH_US * UWB_MAS_PER_ZONE;
+
+ mutex_lock(&rc->rsvs_mutex);
+
+ list_del(&cnflt->rc_node);
+
+ /* update rc global conflicting alien bitmap */
+ bitmap_zero(rc->cnflt_alien_bitmap.bm, UWB_NUM_MAS);
+
+ list_for_each_entry(c, &rc->cnflt_alien_list, rc_node) {
+ bitmap_or(rc->cnflt_alien_bitmap.bm, rc->cnflt_alien_bitmap.bm,
+ c->mas.bm, UWB_NUM_MAS);
+ }
+
+ queue_delayed_work(rc->rsv_workq, &rc->rsv_alien_bp_work,
+ usecs_to_jiffies(delay_us));
+
+ kfree(cnflt);
+ mutex_unlock(&rc->rsvs_mutex);
+}
+
+static void uwb_cnflt_timer(unsigned long arg)
+{
+ struct uwb_cnflt_alien *cnflt = (struct uwb_cnflt_alien *)arg;
+
+ queue_work(cnflt->rc->rsv_workq, &cnflt->cnflt_update_work);
+}
+
+/*
+ * We have received an DRP_IE of type Alien BP and we need to make
+ * sure we do not transmit in conflicting MASs.
+ */
+static void uwb_drp_handle_alien_drp(struct uwb_rc *rc, struct uwb_ie_drp *drp_ie)
+{
+ struct device *dev = &rc->uwb_dev.dev;
+ struct uwb_mas_bm mas;
+ struct uwb_cnflt_alien *cnflt;
+ unsigned long delay_us = UWB_MAS_LENGTH_US * UWB_MAS_PER_ZONE;
+
+ uwb_drp_ie_to_bm(&mas, drp_ie);
+
+ list_for_each_entry(cnflt, &rc->cnflt_alien_list, rc_node) {
+ if (bitmap_equal(cnflt->mas.bm, mas.bm, UWB_NUM_MAS)) {
+ /* Existing alien BP reservation conflicting
+ * bitmap, just reset the timer */
+ uwb_cnflt_alien_stroke_timer(cnflt);
+ return;
+ }
+ }
+
+ /* New alien BP reservation conflicting bitmap */
+
+ /* alloc and initialize new uwb_cnflt_alien */
+ cnflt = kzalloc(sizeof(struct uwb_cnflt_alien), GFP_KERNEL);
+ if (!cnflt) {
+ dev_err(dev, "failed to alloc uwb_cnflt_alien struct\n");
+ return;
+ }
+
+ INIT_LIST_HEAD(&cnflt->rc_node);
+ init_timer(&cnflt->timer);
+ cnflt->timer.function = uwb_cnflt_timer;
+ cnflt->timer.data = (unsigned long)cnflt;
+
+ cnflt->rc = rc;
+ INIT_WORK(&cnflt->cnflt_update_work, uwb_cnflt_update_work);
+
+ bitmap_copy(cnflt->mas.bm, mas.bm, UWB_NUM_MAS);
+
+ list_add_tail(&cnflt->rc_node, &rc->cnflt_alien_list);
+
+ /* update rc global conflicting alien bitmap */
+ bitmap_or(rc->cnflt_alien_bitmap.bm, rc->cnflt_alien_bitmap.bm, mas.bm, UWB_NUM_MAS);
+
+ queue_delayed_work(rc->rsv_workq, &rc->rsv_alien_bp_work, usecs_to_jiffies(delay_us));
+
+ /* start the timer */
+ uwb_cnflt_alien_stroke_timer(cnflt);
+}
+
+static void uwb_drp_process_not_involved(struct uwb_rc *rc,
+ struct uwb_rc_evt_drp *drp_evt,
+ struct uwb_ie_drp *drp_ie)
+{
+ struct uwb_mas_bm mas;
+
+ uwb_drp_ie_to_bm(&mas, drp_ie);
+ uwb_drp_handle_all_conflict_rsv(rc, drp_evt, drp_ie, &mas);
+}
+
+static void uwb_drp_process_involved(struct uwb_rc *rc, struct uwb_dev *src,
+ struct uwb_rc_evt_drp *drp_evt,
+ struct uwb_ie_drp *drp_ie)
+{
+ struct uwb_rsv *rsv;
+
+ rsv = uwb_rsv_find(rc, src, drp_ie);
+ if (!rsv) {
+ /*
+ * No reservation? It's either for a recently
+ * terminated reservation; or the DRP IE couldn't be
+ * processed (e.g., an invalid IE or out of memory).
+ */
+ return;
+ }
+
+ /*
+ * Do nothing with DRP IEs for reservations that have been
+ * terminated.
+ */
+ if (rsv->state == UWB_RSV_STATE_NONE) {
+ uwb_rsv_set_state(rsv, UWB_RSV_STATE_NONE);
+ return;
+ }
+
+ if (uwb_ie_drp_owner(drp_ie))
+ uwb_drp_process_target(rc, rsv, drp_ie, drp_evt);
+ else
+ uwb_drp_process_owner(rc, rsv, src, drp_ie, drp_evt);
+
+}
+
+
+static bool uwb_drp_involves_us(struct uwb_rc *rc, struct uwb_ie_drp *drp_ie)
+{
+ return uwb_dev_addr_cmp(&rc->uwb_dev.dev_addr, &drp_ie->dev_addr) == 0;
+}
+
+/*
+ * Process a received DRP IE.
+ */
+static void uwb_drp_process(struct uwb_rc *rc, struct uwb_rc_evt_drp *drp_evt,
+ struct uwb_dev *src, struct uwb_ie_drp *drp_ie)
+{
+ if (uwb_ie_drp_type(drp_ie) == UWB_DRP_TYPE_ALIEN_BP)
+ uwb_drp_handle_alien_drp(rc, drp_ie);
+ else if (uwb_drp_involves_us(rc, drp_ie))
+ uwb_drp_process_involved(rc, src, drp_evt, drp_ie);
+ else
+ uwb_drp_process_not_involved(rc, drp_evt, drp_ie);
+}
+
+/*
+ * Process a received DRP Availability IE
+ */
+static void uwb_drp_availability_process(struct uwb_rc *rc, struct uwb_dev *src,
+ struct uwb_ie_drp_avail *drp_availability_ie)
+{
+ bitmap_copy(src->last_availability_bm,
+ drp_availability_ie->bmp, UWB_NUM_MAS);
+}
+
+/*
+ * Process all the DRP IEs (both DRP IEs and the DRP Availability IE)
+ * from a device.
+ */
+static
+void uwb_drp_process_all(struct uwb_rc *rc, struct uwb_rc_evt_drp *drp_evt,
+ size_t ielen, struct uwb_dev *src_dev)
+{
+ struct device *dev = &rc->uwb_dev.dev;
+ struct uwb_ie_hdr *ie_hdr;
+ void *ptr;
+
+ ptr = drp_evt->ie_data;
+ for (;;) {
+ ie_hdr = uwb_ie_next(&ptr, &ielen);
+ if (!ie_hdr)
+ break;
+
+ switch (ie_hdr->element_id) {
+ case UWB_IE_DRP_AVAILABILITY:
+ uwb_drp_availability_process(rc, src_dev, (struct uwb_ie_drp_avail *)ie_hdr);
+ break;
+ case UWB_IE_DRP:
+ uwb_drp_process(rc, drp_evt, src_dev, (struct uwb_ie_drp *)ie_hdr);
+ break;
+ default:
+ dev_warn(dev, "unexpected IE in DRP notification\n");
+ break;
+ }
+ }
+
+ if (ielen > 0)
+ dev_warn(dev, "%d octets remaining in DRP notification\n",
+ (int)ielen);
+}
+
+/**
+ * uwbd_evt_handle_rc_drp - handle a DRP_IE event
+ * @evt: the DRP_IE event from the radio controller
+ *
+ * This processes DRP notifications from the radio controller, either
+ * initiating a new reservation or transitioning an existing
+ * reservation into a different state.
+ *
+ * DRP notifications can occur for three different reasons:
+ *
+ * - UWB_DRP_NOTIF_DRP_IE_RECVD: one or more DRP IEs with the RC as
+ * the target or source have been received.
+ *
+ * These DRP IEs could be new or for an existing reservation.
+ *
+ * If the DRP IE for an existing reservation ceases to be to
+ * received for at least mMaxLostBeacons, the reservation should be
+ * considered to be terminated. Note that the TERMINATE reason (see
+ * below) may not always be signalled (e.g., the remote device has
+ * two or more reservations established with the RC).
+ *
+ * - UWB_DRP_NOTIF_CONFLICT: DRP IEs from any device in the beacon
+ * group conflict with the RC's reservations.
+ *
+ * - UWB_DRP_NOTIF_TERMINATE: DRP IEs are no longer being received
+ * from a device (i.e., it's terminated all reservations).
+ *
+ * Only the software state of the reservations is changed; the setting
+ * of the radio controller's DRP IEs is done after all the events in
+ * an event buffer are processed. This saves waiting multiple times
+ * for the SET_DRP_IE command to complete.
+ */
+int uwbd_evt_handle_rc_drp(struct uwb_event *evt)
+{
+ struct device *dev = &evt->rc->uwb_dev.dev;
+ struct uwb_rc *rc = evt->rc;
+ struct uwb_rc_evt_drp *drp_evt;
+ size_t ielength, bytes_left;
+ struct uwb_dev_addr src_addr;
+ struct uwb_dev *src_dev;
+
+ /* Is there enough data to decode the event (and any IEs in
+ its payload)? */
+ if (evt->notif.size < sizeof(*drp_evt)) {
+ dev_err(dev, "DRP event: Not enough data to decode event "
+ "[%zu bytes left, %zu needed]\n",
+ evt->notif.size, sizeof(*drp_evt));
+ return 0;
+ }
+ bytes_left = evt->notif.size - sizeof(*drp_evt);
+ drp_evt = container_of(evt->notif.rceb, struct uwb_rc_evt_drp, rceb);
+ ielength = le16_to_cpu(drp_evt->ie_length);
+ if (bytes_left != ielength) {
+ dev_err(dev, "DRP event: Not enough data in payload [%zu"
+ "bytes left, %zu declared in the event]\n",
+ bytes_left, ielength);
+ return 0;
+ }
+
+ memcpy(src_addr.data, &drp_evt->src_addr, sizeof(src_addr));
+ src_dev = uwb_dev_get_by_devaddr(rc, &src_addr);
+ if (!src_dev) {
+ /*
+ * A DRP notification from an unrecognized device.
+ *
+ * This is probably from a WUSB device that doesn't
+ * have an EUI-48 and therefore doesn't show up in the
+ * UWB device database. It's safe to simply ignore
+ * these.
+ */
+ return 0;
+ }
+
+ mutex_lock(&rc->rsvs_mutex);
+
+ /* We do not distinguish from the reason */
+ uwb_drp_process_all(rc, drp_evt, ielength, src_dev);
+
+ mutex_unlock(&rc->rsvs_mutex);
+
+ uwb_dev_put(src_dev);
+ return 0;
+}
diff --git a/drivers/uwb/est.c b/drivers/uwb/est.c
new file mode 100644
index 000000000..f3e232584
--- /dev/null
+++ b/drivers/uwb/est.c
@@ -0,0 +1,464 @@
+/*
+ * Ultra Wide Band Radio Control
+ * Event Size Tables management
+ *
+ * Copyright (C) 2005-2006 Intel Corporation
+ * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ *
+ *
+ * FIXME: docs
+ *
+ * Infrastructure, code and data tables for guessing the size of
+ * events received on the notification endpoints of UWB radio
+ * controllers.
+ *
+ * You define a table of events and for each, its size and how to get
+ * the extra size.
+ *
+ * ENTRY POINTS:
+ *
+ * uwb_est_{init/destroy}(): To initialize/release the EST subsystem.
+ *
+ * uwb_est_[u]register(): To un/register event size tables
+ * uwb_est_grow()
+ *
+ * uwb_est_find_size(): Get the size of an event
+ * uwb_est_get_size()
+ */
+#include <linux/spinlock.h>
+#include <linux/slab.h>
+#include <linux/export.h>
+
+#include "uwb-internal.h"
+
+struct uwb_est {
+ u16 type_event_high;
+ u16 vendor, product;
+ u8 entries;
+ const struct uwb_est_entry *entry;
+};
+
+static struct uwb_est *uwb_est;
+static u8 uwb_est_size;
+static u8 uwb_est_used;
+static DEFINE_RWLOCK(uwb_est_lock);
+
+/**
+ * WUSB Standard Event Size Table, HWA-RC interface
+ *
+ * Sizes for events and notifications type 0 (general), high nibble 0.
+ */
+static
+struct uwb_est_entry uwb_est_00_00xx[] = {
+ [UWB_RC_EVT_IE_RCV] = {
+ .size = sizeof(struct uwb_rc_evt_ie_rcv),
+ .offset = 1 + offsetof(struct uwb_rc_evt_ie_rcv, wIELength),
+ },
+ [UWB_RC_EVT_BEACON] = {
+ .size = sizeof(struct uwb_rc_evt_beacon),
+ .offset = 1 + offsetof(struct uwb_rc_evt_beacon, wBeaconInfoLength),
+ },
+ [UWB_RC_EVT_BEACON_SIZE] = {
+ .size = sizeof(struct uwb_rc_evt_beacon_size),
+ },
+ [UWB_RC_EVT_BPOIE_CHANGE] = {
+ .size = sizeof(struct uwb_rc_evt_bpoie_change),
+ .offset = 1 + offsetof(struct uwb_rc_evt_bpoie_change,
+ wBPOIELength),
+ },
+ [UWB_RC_EVT_BP_SLOT_CHANGE] = {
+ .size = sizeof(struct uwb_rc_evt_bp_slot_change),
+ },
+ [UWB_RC_EVT_BP_SWITCH_IE_RCV] = {
+ .size = sizeof(struct uwb_rc_evt_bp_switch_ie_rcv),
+ .offset = 1 + offsetof(struct uwb_rc_evt_bp_switch_ie_rcv, wIELength),
+ },
+ [UWB_RC_EVT_DEV_ADDR_CONFLICT] = {
+ .size = sizeof(struct uwb_rc_evt_dev_addr_conflict),
+ },
+ [UWB_RC_EVT_DRP_AVAIL] = {
+ .size = sizeof(struct uwb_rc_evt_drp_avail)
+ },
+ [UWB_RC_EVT_DRP] = {
+ .size = sizeof(struct uwb_rc_evt_drp),
+ .offset = 1 + offsetof(struct uwb_rc_evt_drp, ie_length),
+ },
+ [UWB_RC_EVT_BP_SWITCH_STATUS] = {
+ .size = sizeof(struct uwb_rc_evt_bp_switch_status),
+ },
+ [UWB_RC_EVT_CMD_FRAME_RCV] = {
+ .size = sizeof(struct uwb_rc_evt_cmd_frame_rcv),
+ .offset = 1 + offsetof(struct uwb_rc_evt_cmd_frame_rcv, dataLength),
+ },
+ [UWB_RC_EVT_CHANNEL_CHANGE_IE_RCV] = {
+ .size = sizeof(struct uwb_rc_evt_channel_change_ie_rcv),
+ .offset = 1 + offsetof(struct uwb_rc_evt_channel_change_ie_rcv, wIELength),
+ },
+ [UWB_RC_CMD_CHANNEL_CHANGE] = {
+ .size = sizeof(struct uwb_rc_evt_confirm),
+ },
+ [UWB_RC_CMD_DEV_ADDR_MGMT] = {
+ .size = sizeof(struct uwb_rc_evt_dev_addr_mgmt) },
+ [UWB_RC_CMD_GET_IE] = {
+ .size = sizeof(struct uwb_rc_evt_get_ie),
+ .offset = 1 + offsetof(struct uwb_rc_evt_get_ie, wIELength),
+ },
+ [UWB_RC_CMD_RESET] = {
+ .size = sizeof(struct uwb_rc_evt_confirm),
+ },
+ [UWB_RC_CMD_SCAN] = {
+ .size = sizeof(struct uwb_rc_evt_confirm),
+ },
+ [UWB_RC_CMD_SET_BEACON_FILTER] = {
+ .size = sizeof(struct uwb_rc_evt_confirm),
+ },
+ [UWB_RC_CMD_SET_DRP_IE] = {
+ .size = sizeof(struct uwb_rc_evt_set_drp_ie),
+ },
+ [UWB_RC_CMD_SET_IE] = {
+ .size = sizeof(struct uwb_rc_evt_set_ie),
+ },
+ [UWB_RC_CMD_SET_NOTIFICATION_FILTER] = {
+ .size = sizeof(struct uwb_rc_evt_confirm),
+ },
+ [UWB_RC_CMD_SET_TX_POWER] = {
+ .size = sizeof(struct uwb_rc_evt_confirm),
+ },
+ [UWB_RC_CMD_SLEEP] = {
+ .size = sizeof(struct uwb_rc_evt_confirm),
+ },
+ [UWB_RC_CMD_START_BEACON] = {
+ .size = sizeof(struct uwb_rc_evt_confirm),
+ },
+ [UWB_RC_CMD_STOP_BEACON] = {
+ .size = sizeof(struct uwb_rc_evt_confirm),
+ },
+ [UWB_RC_CMD_BP_MERGE] = {
+ .size = sizeof(struct uwb_rc_evt_confirm),
+ },
+ [UWB_RC_CMD_SEND_COMMAND_FRAME] = {
+ .size = sizeof(struct uwb_rc_evt_confirm),
+ },
+ [UWB_RC_CMD_SET_ASIE_NOTIF] = {
+ .size = sizeof(struct uwb_rc_evt_confirm),
+ },
+};
+
+static
+struct uwb_est_entry uwb_est_01_00xx[] = {
+ [UWB_RC_DAA_ENERGY_DETECTED] = {
+ .size = sizeof(struct uwb_rc_evt_daa_energy_detected),
+ },
+ [UWB_RC_SET_DAA_ENERGY_MASK] = {
+ .size = sizeof(struct uwb_rc_evt_set_daa_energy_mask),
+ },
+ [UWB_RC_SET_NOTIFICATION_FILTER_EX] = {
+ .size = sizeof(struct uwb_rc_evt_set_notification_filter_ex),
+ },
+};
+
+/**
+ * Initialize the EST subsystem
+ *
+ * Register the standard tables also.
+ *
+ * FIXME: tag init
+ */
+int uwb_est_create(void)
+{
+ int result;
+
+ uwb_est_size = 2;
+ uwb_est_used = 0;
+ uwb_est = kcalloc(uwb_est_size, sizeof(uwb_est[0]), GFP_KERNEL);
+ if (uwb_est == NULL)
+ return -ENOMEM;
+
+ result = uwb_est_register(UWB_RC_CET_GENERAL, 0, 0xffff, 0xffff,
+ uwb_est_00_00xx, ARRAY_SIZE(uwb_est_00_00xx));
+ if (result < 0)
+ goto out;
+ result = uwb_est_register(UWB_RC_CET_EX_TYPE_1, 0, 0xffff, 0xffff,
+ uwb_est_01_00xx, ARRAY_SIZE(uwb_est_01_00xx));
+out:
+ return result;
+}
+
+
+/** Clean it up */
+void uwb_est_destroy(void)
+{
+ kfree(uwb_est);
+ uwb_est = NULL;
+ uwb_est_size = uwb_est_used = 0;
+}
+
+
+/**
+ * Double the capacity of the EST table
+ *
+ * @returns 0 if ok, < 0 errno no error.
+ */
+static
+int uwb_est_grow(void)
+{
+ size_t actual_size = uwb_est_size * sizeof(uwb_est[0]);
+ void *new = kmalloc(2 * actual_size, GFP_ATOMIC);
+ if (new == NULL)
+ return -ENOMEM;
+ memcpy(new, uwb_est, actual_size);
+ memset(new + actual_size, 0, actual_size);
+ kfree(uwb_est);
+ uwb_est = new;
+ uwb_est_size *= 2;
+ return 0;
+}
+
+
+/**
+ * Register an event size table
+ *
+ * Makes room for it if the table is full, and then inserts it in the
+ * right position (entries are sorted by type, event_high, vendor and
+ * then product).
+ *
+ * @vendor: vendor code for matching against the device (0x0000 and
+ * 0xffff mean any); use 0x0000 to force all to match without
+ * checking possible vendor specific ones, 0xfffff to match
+ * after checking vendor specific ones.
+ *
+ * @product: product code from that vendor; same matching rules, use
+ * 0x0000 for not allowing vendor specific matches, 0xffff
+ * for allowing.
+ *
+ * This arragement just makes the tables sort differenty. Because the
+ * table is sorted by growing type-event_high-vendor-product, a zero
+ * vendor will match before than a 0x456a vendor, that will match
+ * before a 0xfffff vendor.
+ *
+ * @returns 0 if ok, < 0 errno on error (-ENOENT if not found).
+ */
+/* FIXME: add bus type to vendor/product code */
+int uwb_est_register(u8 type, u8 event_high, u16 vendor, u16 product,
+ const struct uwb_est_entry *entry, size_t entries)
+{
+ unsigned long flags;
+ unsigned itr;
+ int result = 0;
+
+ write_lock_irqsave(&uwb_est_lock, flags);
+ if (uwb_est_used == uwb_est_size) {
+ result = uwb_est_grow();
+ if (result < 0)
+ goto out;
+ }
+ /* Find the right spot to insert it in */
+ for (itr = 0; itr < uwb_est_used; itr++)
+ if (uwb_est[itr].type_event_high < type
+ && uwb_est[itr].vendor < vendor
+ && uwb_est[itr].product < product)
+ break;
+
+ /* Shift others to make room for the new one? */
+ if (itr < uwb_est_used)
+ memmove(&uwb_est[itr+1], &uwb_est[itr], uwb_est_used - itr);
+ uwb_est[itr].type_event_high = type << 8 | event_high;
+ uwb_est[itr].vendor = vendor;
+ uwb_est[itr].product = product;
+ uwb_est[itr].entry = entry;
+ uwb_est[itr].entries = entries;
+ uwb_est_used++;
+out:
+ write_unlock_irqrestore(&uwb_est_lock, flags);
+ return result;
+}
+EXPORT_SYMBOL_GPL(uwb_est_register);
+
+
+/**
+ * Unregister an event size table
+ *
+ * This just removes the specified entry and moves the ones after it
+ * to fill in the gap. This is needed to keep the list sorted; no
+ * reallocation is done to reduce the size of the table.
+ *
+ * We unregister by all the data we used to register instead of by
+ * pointer to the @entry array because we might have used the same
+ * table for a bunch of IDs (for example).
+ *
+ * @returns 0 if ok, < 0 errno on error (-ENOENT if not found).
+ */
+int uwb_est_unregister(u8 type, u8 event_high, u16 vendor, u16 product,
+ const struct uwb_est_entry *entry, size_t entries)
+{
+ unsigned long flags;
+ unsigned itr;
+ struct uwb_est est_cmp = {
+ .type_event_high = type << 8 | event_high,
+ .vendor = vendor,
+ .product = product,
+ .entry = entry,
+ .entries = entries
+ };
+ write_lock_irqsave(&uwb_est_lock, flags);
+ for (itr = 0; itr < uwb_est_used; itr++)
+ if (!memcmp(&uwb_est[itr], &est_cmp, sizeof(est_cmp)))
+ goto found;
+ write_unlock_irqrestore(&uwb_est_lock, flags);
+ return -ENOENT;
+
+found:
+ if (itr < uwb_est_used - 1) /* Not last one? move ones above */
+ memmove(&uwb_est[itr], &uwb_est[itr+1], uwb_est_used - itr - 1);
+ uwb_est_used--;
+ write_unlock_irqrestore(&uwb_est_lock, flags);
+ return 0;
+}
+EXPORT_SYMBOL_GPL(uwb_est_unregister);
+
+
+/**
+ * Get the size of an event from a table
+ *
+ * @rceb: pointer to the buffer with the event
+ * @rceb_size: size of the area pointed to by @rceb in bytes.
+ * @returns: > 0 Size of the event
+ * -ENOSPC An area big enough was not provided to look
+ * ahead into the event's guts and guess the size.
+ * -EINVAL Unknown event code (wEvent).
+ *
+ * This will look at the received RCEB and guess what is the total
+ * size. For variable sized events, it will look further ahead into
+ * their length field to see how much data should be read.
+ *
+ * Note this size is *not* final--the neh (Notification/Event Handle)
+ * might specificy an extra size to add.
+ */
+static
+ssize_t uwb_est_get_size(struct uwb_rc *uwb_rc, struct uwb_est *est,
+ u8 event_low, const struct uwb_rceb *rceb,
+ size_t rceb_size)
+{
+ unsigned offset;
+ ssize_t size;
+ struct device *dev = &uwb_rc->uwb_dev.dev;
+ const struct uwb_est_entry *entry;
+
+ size = -ENOENT;
+ if (event_low >= est->entries) { /* in range? */
+ dev_err(dev, "EST %p 0x%04x/%04x/%04x[%u]: event %u out of range\n",
+ est, est->type_event_high, est->vendor, est->product,
+ est->entries, event_low);
+ goto out;
+ }
+ size = -ENOENT;
+ entry = &est->entry[event_low];
+ if (entry->size == 0 && entry->offset == 0) { /* unknown? */
+ dev_err(dev, "EST %p 0x%04x/%04x/%04x[%u]: event %u unknown\n",
+ est, est->type_event_high, est->vendor, est->product,
+ est->entries, event_low);
+ goto out;
+ }
+ offset = entry->offset; /* extra fries with that? */
+ if (offset == 0)
+ size = entry->size;
+ else {
+ /* Ops, got an extra size field at 'offset'--read it */
+ const void *ptr = rceb;
+ size_t type_size = 0;
+ offset--;
+ size = -ENOSPC; /* enough data for more? */
+ switch (entry->type) {
+ case UWB_EST_16: type_size = sizeof(__le16); break;
+ case UWB_EST_8: type_size = sizeof(u8); break;
+ default: BUG();
+ }
+ if (offset + type_size > rceb_size) {
+ dev_err(dev, "EST %p 0x%04x/%04x/%04x[%u]: "
+ "not enough data to read extra size\n",
+ est, est->type_event_high, est->vendor,
+ est->product, est->entries);
+ goto out;
+ }
+ size = entry->size;
+ ptr += offset;
+ switch (entry->type) {
+ case UWB_EST_16: size += le16_to_cpu(*(__le16 *)ptr); break;
+ case UWB_EST_8: size += *(u8 *)ptr; break;
+ default: BUG();
+ }
+ }
+out:
+ return size;
+}
+
+
+/**
+ * Guesses the size of a WA event
+ *
+ * @rceb: pointer to the buffer with the event
+ * @rceb_size: size of the area pointed to by @rceb in bytes.
+ * @returns: > 0 Size of the event
+ * -ENOSPC An area big enough was not provided to look
+ * ahead into the event's guts and guess the size.
+ * -EINVAL Unknown event code (wEvent).
+ *
+ * This will look at the received RCEB and guess what is the total
+ * size by checking all the tables registered with
+ * uwb_est_register(). For variable sized events, it will look further
+ * ahead into their length field to see how much data should be read.
+ *
+ * Note this size is *not* final--the neh (Notification/Event Handle)
+ * might specificy an extra size to add or replace.
+ */
+ssize_t uwb_est_find_size(struct uwb_rc *rc, const struct uwb_rceb *rceb,
+ size_t rceb_size)
+{
+ /* FIXME: add vendor/product data */
+ ssize_t size;
+ struct device *dev = &rc->uwb_dev.dev;
+ unsigned long flags;
+ unsigned itr;
+ u16 type_event_high, event;
+
+ read_lock_irqsave(&uwb_est_lock, flags);
+ size = -ENOSPC;
+ if (rceb_size < sizeof(*rceb))
+ goto out;
+ event = le16_to_cpu(rceb->wEvent);
+ type_event_high = rceb->bEventType << 8 | (event & 0xff00) >> 8;
+ for (itr = 0; itr < uwb_est_used; itr++) {
+ if (uwb_est[itr].type_event_high != type_event_high)
+ continue;
+ size = uwb_est_get_size(rc, &uwb_est[itr],
+ event & 0x00ff, rceb, rceb_size);
+ /* try more tables that might handle the same type */
+ if (size != -ENOENT)
+ goto out;
+ }
+ dev_dbg(dev,
+ "event 0x%02x/%04x/%02x: no handlers available; RCEB %4ph\n",
+ (unsigned) rceb->bEventType,
+ (unsigned) le16_to_cpu(rceb->wEvent),
+ (unsigned) rceb->bEventContext,
+ rceb);
+ size = -ENOENT;
+out:
+ read_unlock_irqrestore(&uwb_est_lock, flags);
+ return size;
+}
+EXPORT_SYMBOL_GPL(uwb_est_find_size);
diff --git a/drivers/uwb/hwa-rc.c b/drivers/uwb/hwa-rc.c
new file mode 100644
index 000000000..0257f35cf
--- /dev/null
+++ b/drivers/uwb/hwa-rc.c
@@ -0,0 +1,942 @@
+/*
+ * WUSB Host Wire Adapter: Radio Control Interface (WUSB[8.6])
+ * Radio Control command/event transport
+ *
+ * Copyright (C) 2005-2006 Intel Corporation
+ * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ *
+ *
+ * Initialize the Radio Control interface Driver.
+ *
+ * For each device probed, creates an 'struct hwarc' which contains
+ * just the representation of the UWB Radio Controller, and the logic
+ * for reading notifications and passing them to the UWB Core.
+ *
+ * So we initialize all of those, register the UWB Radio Controller
+ * and setup the notification/event handle to pipe the notifications
+ * to the UWB management Daemon.
+ *
+ * Command and event filtering.
+ *
+ * This is the driver for the Radio Control Interface described in WUSB
+ * 1.0. The core UWB module assumes that all drivers are compliant to the
+ * WHCI 0.95 specification. We thus create a filter that parses all
+ * incoming messages from the (WUSB 1.0) device and manipulate them to
+ * conform to the WHCI 0.95 specification. Similarly, outgoing messages
+ * are parsed and manipulated to conform to the WUSB 1.0 compliant messages
+ * that the device expects. Only a few messages are affected:
+ * Affected events:
+ * UWB_RC_EVT_BEACON
+ * UWB_RC_EVT_BP_SLOT_CHANGE
+ * UWB_RC_EVT_DRP_AVAIL
+ * UWB_RC_EVT_DRP
+ * Affected commands:
+ * UWB_RC_CMD_SCAN
+ * UWB_RC_CMD_SET_DRP_IE
+ *
+ *
+ *
+ */
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/usb.h>
+#include <linux/usb/wusb.h>
+#include <linux/usb/wusb-wa.h>
+#include <linux/uwb.h>
+
+#include "uwb-internal.h"
+
+/* The device uses commands and events from the WHCI specification, although
+ * reporting itself as WUSB compliant. */
+#define WUSB_QUIRK_WHCI_CMD_EVT 0x01
+
+/**
+ * Descriptor for an instance of the UWB Radio Control Driver that
+ * attaches to the RCI interface of the Host Wired Adapter.
+ *
+ * Unless there is a lock specific to the 'data members', all access
+ * is protected by uwb_rc->mutex.
+ *
+ * The NEEP (Notification/Event EndPoint) URB (@neep_urb) writes to
+ * @rd_buffer. Note there is no locking because it is perfectly (heh!)
+ * serialized--probe() submits an URB, callback is called, processes
+ * the data (synchronously), submits another URB, and so on. There is
+ * no concurrent access to the buffer.
+ */
+struct hwarc {
+ struct usb_device *usb_dev;
+ struct usb_interface *usb_iface;
+ struct uwb_rc *uwb_rc; /* UWB host controller */
+ struct urb *neep_urb; /* Notification endpoint handling */
+ struct edc neep_edc;
+ void *rd_buffer; /* NEEP read buffer */
+};
+
+
+/* Beacon received notification (WUSB 1.0 [8.6.3.2]) */
+struct uwb_rc_evt_beacon_WUSB_0100 {
+ struct uwb_rceb rceb;
+ u8 bChannelNumber;
+ __le16 wBPSTOffset;
+ u8 bLQI;
+ u8 bRSSI;
+ __le16 wBeaconInfoLength;
+ u8 BeaconInfo[];
+} __attribute__((packed));
+
+/**
+ * Filter WUSB 1.0 BEACON RCV notification to be WHCI 0.95
+ *
+ * @header: the incoming event
+ * @buf_size: size of buffer containing incoming event
+ * @new_size: size of event after filtering completed
+ *
+ * The WHCI 0.95 spec has a "Beacon Type" field. This value is unknown at
+ * the time we receive the beacon from WUSB so we just set it to
+ * UWB_RC_BEACON_TYPE_NEIGHBOR as a default.
+ * The solution below allocates memory upon receipt of every beacon from a
+ * WUSB device. This will deteriorate performance. What is the right way to
+ * do this?
+ */
+static
+int hwarc_filter_evt_beacon_WUSB_0100(struct uwb_rc *rc,
+ struct uwb_rceb **header,
+ const size_t buf_size,
+ size_t *new_size)
+{
+ struct uwb_rc_evt_beacon_WUSB_0100 *be;
+ struct uwb_rc_evt_beacon *newbe;
+ size_t bytes_left, ielength;
+ struct device *dev = &rc->uwb_dev.dev;
+
+ be = container_of(*header, struct uwb_rc_evt_beacon_WUSB_0100, rceb);
+ bytes_left = buf_size;
+ if (bytes_left < sizeof(*be)) {
+ dev_err(dev, "Beacon Received Notification: Not enough data "
+ "to decode for filtering (%zu vs %zu bytes needed)\n",
+ bytes_left, sizeof(*be));
+ return -EINVAL;
+ }
+ bytes_left -= sizeof(*be);
+ ielength = le16_to_cpu(be->wBeaconInfoLength);
+ if (bytes_left < ielength) {
+ dev_err(dev, "Beacon Received Notification: Not enough data "
+ "to decode IEs (%zu vs %zu bytes needed)\n",
+ bytes_left, ielength);
+ return -EINVAL;
+ }
+ newbe = kzalloc(sizeof(*newbe) + ielength, GFP_ATOMIC);
+ if (newbe == NULL)
+ return -ENOMEM;
+ newbe->rceb = be->rceb;
+ newbe->bChannelNumber = be->bChannelNumber;
+ newbe->bBeaconType = UWB_RC_BEACON_TYPE_NEIGHBOR;
+ newbe->wBPSTOffset = be->wBPSTOffset;
+ newbe->bLQI = be->bLQI;
+ newbe->bRSSI = be->bRSSI;
+ newbe->wBeaconInfoLength = be->wBeaconInfoLength;
+ memcpy(newbe->BeaconInfo, be->BeaconInfo, ielength);
+ *header = &newbe->rceb;
+ *new_size = sizeof(*newbe) + ielength;
+ return 1; /* calling function will free memory */
+}
+
+
+/* DRP Availability change notification (WUSB 1.0 [8.6.3.8]) */
+struct uwb_rc_evt_drp_avail_WUSB_0100 {
+ struct uwb_rceb rceb;
+ __le16 wIELength;
+ u8 IEData[];
+} __attribute__((packed));
+
+/**
+ * Filter WUSB 1.0 DRP AVAILABILITY CHANGE notification to be WHCI 0.95
+ *
+ * @header: the incoming event
+ * @buf_size: size of buffer containing incoming event
+ * @new_size: size of event after filtering completed
+ */
+static
+int hwarc_filter_evt_drp_avail_WUSB_0100(struct uwb_rc *rc,
+ struct uwb_rceb **header,
+ const size_t buf_size,
+ size_t *new_size)
+{
+ struct uwb_rc_evt_drp_avail_WUSB_0100 *da;
+ struct uwb_rc_evt_drp_avail *newda;
+ struct uwb_ie_hdr *ie_hdr;
+ size_t bytes_left, ielength;
+ struct device *dev = &rc->uwb_dev.dev;
+
+
+ da = container_of(*header, struct uwb_rc_evt_drp_avail_WUSB_0100, rceb);
+ bytes_left = buf_size;
+ if (bytes_left < sizeof(*da)) {
+ dev_err(dev, "Not enough data to decode DRP Avail "
+ "Notification for filtering. Expected %zu, "
+ "received %zu.\n", (size_t)sizeof(*da), bytes_left);
+ return -EINVAL;
+ }
+ bytes_left -= sizeof(*da);
+ ielength = le16_to_cpu(da->wIELength);
+ if (bytes_left < ielength) {
+ dev_err(dev, "DRP Avail Notification filter: IE length "
+ "[%zu bytes] does not match actual length "
+ "[%zu bytes].\n", ielength, bytes_left);
+ return -EINVAL;
+ }
+ if (ielength < sizeof(*ie_hdr)) {
+ dev_err(dev, "DRP Avail Notification filter: Not enough "
+ "data to decode IE [%zu bytes, %zu needed]\n",
+ ielength, sizeof(*ie_hdr));
+ return -EINVAL;
+ }
+ ie_hdr = (void *) da->IEData;
+ if (ie_hdr->length > 32) {
+ dev_err(dev, "DRP Availability Change event has unexpected "
+ "length for filtering. Expected < 32 bytes, "
+ "got %zu bytes.\n", (size_t)ie_hdr->length);
+ return -EINVAL;
+ }
+ newda = kzalloc(sizeof(*newda), GFP_ATOMIC);
+ if (newda == NULL)
+ return -ENOMEM;
+ newda->rceb = da->rceb;
+ memcpy(newda->bmp, (u8 *) ie_hdr + sizeof(*ie_hdr), ie_hdr->length);
+ *header = &newda->rceb;
+ *new_size = sizeof(*newda);
+ return 1; /* calling function will free memory */
+}
+
+
+/* DRP notification (WUSB 1.0 [8.6.3.9]) */
+struct uwb_rc_evt_drp_WUSB_0100 {
+ struct uwb_rceb rceb;
+ struct uwb_dev_addr wSrcAddr;
+ u8 bExplicit;
+ __le16 wIELength;
+ u8 IEData[];
+} __attribute__((packed));
+
+/**
+ * Filter WUSB 1.0 DRP Notification to be WHCI 0.95
+ *
+ * @header: the incoming event
+ * @buf_size: size of buffer containing incoming event
+ * @new_size: size of event after filtering completed
+ *
+ * It is hard to manage DRP reservations without having a Reason code.
+ * Unfortunately there is none in the WUSB spec. We just set the default to
+ * DRP IE RECEIVED.
+ * We do not currently use the bBeaconSlotNumber value, so we set this to
+ * zero for now.
+ */
+static
+int hwarc_filter_evt_drp_WUSB_0100(struct uwb_rc *rc,
+ struct uwb_rceb **header,
+ const size_t buf_size,
+ size_t *new_size)
+{
+ struct uwb_rc_evt_drp_WUSB_0100 *drpev;
+ struct uwb_rc_evt_drp *newdrpev;
+ size_t bytes_left, ielength;
+ struct device *dev = &rc->uwb_dev.dev;
+
+ drpev = container_of(*header, struct uwb_rc_evt_drp_WUSB_0100, rceb);
+ bytes_left = buf_size;
+ if (bytes_left < sizeof(*drpev)) {
+ dev_err(dev, "Not enough data to decode DRP Notification "
+ "for filtering. Expected %zu, received %zu.\n",
+ (size_t)sizeof(*drpev), bytes_left);
+ return -EINVAL;
+ }
+ ielength = le16_to_cpu(drpev->wIELength);
+ bytes_left -= sizeof(*drpev);
+ if (bytes_left < ielength) {
+ dev_err(dev, "DRP Notification filter: header length [%zu "
+ "bytes] does not match actual length [%zu "
+ "bytes].\n", ielength, bytes_left);
+ return -EINVAL;
+ }
+ newdrpev = kzalloc(sizeof(*newdrpev) + ielength, GFP_ATOMIC);
+ if (newdrpev == NULL)
+ return -ENOMEM;
+ newdrpev->rceb = drpev->rceb;
+ newdrpev->src_addr = drpev->wSrcAddr;
+ newdrpev->reason = UWB_DRP_NOTIF_DRP_IE_RCVD;
+ newdrpev->beacon_slot_number = 0;
+ newdrpev->ie_length = drpev->wIELength;
+ memcpy(newdrpev->ie_data, drpev->IEData, ielength);
+ *header = &newdrpev->rceb;
+ *new_size = sizeof(*newdrpev) + ielength;
+ return 1; /* calling function will free memory */
+}
+
+
+/* Scan Command (WUSB 1.0 [8.6.2.5]) */
+struct uwb_rc_cmd_scan_WUSB_0100 {
+ struct uwb_rccb rccb;
+ u8 bChannelNumber;
+ u8 bScanState;
+} __attribute__((packed));
+
+/**
+ * Filter WHCI 0.95 SCAN command to be WUSB 1.0 SCAN command
+ *
+ * @header: command sent to device (compliant to WHCI 0.95)
+ * @size: size of command sent to device
+ *
+ * We only reduce the size by two bytes because the WUSB 1.0 scan command
+ * does not have the last field (wStarttime). Also, make sure we don't send
+ * the device an unexpected scan type.
+ */
+static
+int hwarc_filter_cmd_scan_WUSB_0100(struct uwb_rc *rc,
+ struct uwb_rccb **header,
+ size_t *size)
+{
+ struct uwb_rc_cmd_scan *sc;
+
+ sc = container_of(*header, struct uwb_rc_cmd_scan, rccb);
+
+ if (sc->bScanState == UWB_SCAN_ONLY_STARTTIME)
+ sc->bScanState = UWB_SCAN_ONLY;
+ /* Don't send the last two bytes. */
+ *size -= 2;
+ return 0;
+}
+
+
+/* SET DRP IE command (WUSB 1.0 [8.6.2.7]) */
+struct uwb_rc_cmd_set_drp_ie_WUSB_0100 {
+ struct uwb_rccb rccb;
+ u8 bExplicit;
+ __le16 wIELength;
+ struct uwb_ie_drp IEData[];
+} __attribute__((packed));
+
+/**
+ * Filter WHCI 0.95 SET DRP IE command to be WUSB 1.0 SET DRP IE command
+ *
+ * @header: command sent to device (compliant to WHCI 0.95)
+ * @size: size of command sent to device
+ *
+ * WUSB has an extra bExplicit field - we assume always explicit
+ * negotiation so this field is set. The command expected by the device is
+ * thus larger than the one prepared by the driver so we need to
+ * reallocate memory to accommodate this.
+ * We trust the driver to send us the correct data so no checking is done
+ * on incoming data - evn though it is variable length.
+ */
+static
+int hwarc_filter_cmd_set_drp_ie_WUSB_0100(struct uwb_rc *rc,
+ struct uwb_rccb **header,
+ size_t *size)
+{
+ struct uwb_rc_cmd_set_drp_ie *orgcmd;
+ struct uwb_rc_cmd_set_drp_ie_WUSB_0100 *cmd;
+ size_t ielength;
+
+ orgcmd = container_of(*header, struct uwb_rc_cmd_set_drp_ie, rccb);
+ ielength = le16_to_cpu(orgcmd->wIELength);
+ cmd = kzalloc(sizeof(*cmd) + ielength, GFP_KERNEL);
+ if (cmd == NULL)
+ return -ENOMEM;
+ cmd->rccb = orgcmd->rccb;
+ cmd->bExplicit = 0;
+ cmd->wIELength = orgcmd->wIELength;
+ memcpy(cmd->IEData, orgcmd->IEData, ielength);
+ *header = &cmd->rccb;
+ *size = sizeof(*cmd) + ielength;
+ return 1; /* calling function will free memory */
+}
+
+
+/**
+ * Filter data from WHCI driver to WUSB device
+ *
+ * @header: WHCI 0.95 compliant command from driver
+ * @size: length of command
+ *
+ * The routine managing commands to the device (uwb_rc_cmd()) will call the
+ * filtering function pointer (if it exists) before it passes any data to
+ * the device. At this time the command has been formatted according to
+ * WHCI 0.95 and is ready to be sent to the device.
+ *
+ * The filter function will be provided with the current command and its
+ * length. The function will manipulate the command if necessary and
+ * potentially reallocate memory for a command that needed more memory that
+ * the given command. If new memory was created the function will return 1
+ * to indicate to the calling function that the memory need to be freed
+ * when not needed any more. The size will contain the new length of the
+ * command.
+ * If memory has not been allocated we rely on the original mechanisms to
+ * free the memory of the command - even when we reduce the value of size.
+ */
+static
+int hwarc_filter_cmd_WUSB_0100(struct uwb_rc *rc, struct uwb_rccb **header,
+ size_t *size)
+{
+ int result;
+ struct uwb_rccb *rccb = *header;
+ int cmd = le16_to_cpu(rccb->wCommand);
+ switch (cmd) {
+ case UWB_RC_CMD_SCAN:
+ result = hwarc_filter_cmd_scan_WUSB_0100(rc, header, size);
+ break;
+ case UWB_RC_CMD_SET_DRP_IE:
+ result = hwarc_filter_cmd_set_drp_ie_WUSB_0100(rc, header, size);
+ break;
+ default:
+ result = -ENOANO;
+ break;
+ }
+ return result;
+}
+
+
+/**
+ * Filter data from WHCI driver to WUSB device
+ *
+ * @header: WHCI 0.95 compliant command from driver
+ * @size: length of command
+ *
+ * Filter commands based on which protocol the device supports. The WUSB
+ * errata should be the same as WHCI 0.95 so we do not filter that here -
+ * only WUSB 1.0.
+ */
+static
+int hwarc_filter_cmd(struct uwb_rc *rc, struct uwb_rccb **header,
+ size_t *size)
+{
+ int result = -ENOANO;
+ if (rc->version == 0x0100)
+ result = hwarc_filter_cmd_WUSB_0100(rc, header, size);
+ return result;
+}
+
+
+/**
+ * Compute return value as sum of incoming value and value at given offset
+ *
+ * @rceb: event for which we compute the size, it contains a variable
+ * length field.
+ * @core_size: size of the "non variable" part of the event
+ * @offset: place in event where the length of the variable part is stored
+ * @buf_size: total length of buffer in which event arrived - we need to make
+ * sure we read the offset in memory that is still part of the event
+ */
+static
+ssize_t hwarc_get_event_size(struct uwb_rc *rc, const struct uwb_rceb *rceb,
+ size_t core_size, size_t offset,
+ const size_t buf_size)
+{
+ ssize_t size = -ENOSPC;
+ const void *ptr = rceb;
+ size_t type_size = sizeof(__le16);
+ struct device *dev = &rc->uwb_dev.dev;
+
+ if (offset + type_size >= buf_size) {
+ dev_err(dev, "Not enough data to read extra size of event "
+ "0x%02x/%04x/%02x, only got %zu bytes.\n",
+ rceb->bEventType, le16_to_cpu(rceb->wEvent),
+ rceb->bEventContext, buf_size);
+ goto out;
+ }
+ ptr += offset;
+ size = core_size + le16_to_cpu(*(__le16 *)ptr);
+out:
+ return size;
+}
+
+
+/* Beacon slot change notification (WUSB 1.0 [8.6.3.5]) */
+struct uwb_rc_evt_bp_slot_change_WUSB_0100 {
+ struct uwb_rceb rceb;
+ u8 bSlotNumber;
+} __attribute__((packed));
+
+
+/**
+ * Filter data from WUSB device to WHCI driver
+ *
+ * @header: incoming event
+ * @buf_size: size of buffer in which event arrived
+ * @_event_size: actual size of event in the buffer
+ * @new_size: size of event after filtered
+ *
+ * We don't know how the buffer is constructed - there may be more than one
+ * event in it so buffer length does not determine event length. We first
+ * determine the expected size of the incoming event. This value is passed
+ * back only if the actual filtering succeeded (so we know the computed
+ * expected size is correct). This value will be zero if
+ * the event did not need any filtering.
+ *
+ * WHCI interprets the BP Slot Change event's data differently than
+ * WUSB. The event sizes are exactly the same. The data field
+ * indicates the new beacon slot in which a RC is transmitting its
+ * beacon. The maximum value of this is 96 (wMacBPLength ECMA-368
+ * 17.16 (Table 117)). We thus know that the WUSB value will not set
+ * the bit bNoSlot, so we don't really do anything (placeholder).
+ */
+static
+int hwarc_filter_event_WUSB_0100(struct uwb_rc *rc, struct uwb_rceb **header,
+ const size_t buf_size, size_t *_real_size,
+ size_t *_new_size)
+{
+ int result = -ENOANO;
+ struct uwb_rceb *rceb = *header;
+ int event = le16_to_cpu(rceb->wEvent);
+ ssize_t event_size;
+ size_t core_size, offset;
+
+ if (rceb->bEventType != UWB_RC_CET_GENERAL)
+ goto out;
+ switch (event) {
+ case UWB_RC_EVT_BEACON:
+ core_size = sizeof(struct uwb_rc_evt_beacon_WUSB_0100);
+ offset = offsetof(struct uwb_rc_evt_beacon_WUSB_0100,
+ wBeaconInfoLength);
+ event_size = hwarc_get_event_size(rc, rceb, core_size,
+ offset, buf_size);
+ if (event_size < 0)
+ goto out;
+ *_real_size = event_size;
+ result = hwarc_filter_evt_beacon_WUSB_0100(rc, header,
+ buf_size, _new_size);
+ break;
+ case UWB_RC_EVT_BP_SLOT_CHANGE:
+ *_new_size = *_real_size =
+ sizeof(struct uwb_rc_evt_bp_slot_change_WUSB_0100);
+ result = 0;
+ break;
+
+ case UWB_RC_EVT_DRP_AVAIL:
+ core_size = sizeof(struct uwb_rc_evt_drp_avail_WUSB_0100);
+ offset = offsetof(struct uwb_rc_evt_drp_avail_WUSB_0100,
+ wIELength);
+ event_size = hwarc_get_event_size(rc, rceb, core_size,
+ offset, buf_size);
+ if (event_size < 0)
+ goto out;
+ *_real_size = event_size;
+ result = hwarc_filter_evt_drp_avail_WUSB_0100(
+ rc, header, buf_size, _new_size);
+ break;
+
+ case UWB_RC_EVT_DRP:
+ core_size = sizeof(struct uwb_rc_evt_drp_WUSB_0100);
+ offset = offsetof(struct uwb_rc_evt_drp_WUSB_0100, wIELength);
+ event_size = hwarc_get_event_size(rc, rceb, core_size,
+ offset, buf_size);
+ if (event_size < 0)
+ goto out;
+ *_real_size = event_size;
+ result = hwarc_filter_evt_drp_WUSB_0100(rc, header,
+ buf_size, _new_size);
+ break;
+
+ default:
+ break;
+ }
+out:
+ return result;
+}
+
+/**
+ * Filter data from WUSB device to WHCI driver
+ *
+ * @header: incoming event
+ * @buf_size: size of buffer in which event arrived
+ * @_event_size: actual size of event in the buffer
+ * @_new_size: size of event after filtered
+ *
+ * Filter events based on which protocol the device supports. The WUSB
+ * errata should be the same as WHCI 0.95 so we do not filter that here -
+ * only WUSB 1.0.
+ *
+ * If we don't handle it, we return -ENOANO (why the weird error code?
+ * well, so if I get it, I can pinpoint in the code that raised
+ * it...after all, not too many places use the higher error codes).
+ */
+static
+int hwarc_filter_event(struct uwb_rc *rc, struct uwb_rceb **header,
+ const size_t buf_size, size_t *_real_size,
+ size_t *_new_size)
+{
+ int result = -ENOANO;
+ if (rc->version == 0x0100)
+ result = hwarc_filter_event_WUSB_0100(
+ rc, header, buf_size, _real_size, _new_size);
+ return result;
+}
+
+
+/**
+ * Execute an UWB RC command on HWA
+ *
+ * @rc: Instance of a Radio Controller that is a HWA
+ * @cmd: Buffer containing the RCCB and payload to execute
+ * @cmd_size: Size of the command buffer.
+ *
+ * NOTE: rc's mutex has to be locked
+ */
+static
+int hwarc_cmd(struct uwb_rc *uwb_rc, const struct uwb_rccb *cmd, size_t cmd_size)
+{
+ struct hwarc *hwarc = uwb_rc->priv;
+ return usb_control_msg(
+ hwarc->usb_dev, usb_sndctrlpipe(hwarc->usb_dev, 0),
+ WA_EXEC_RC_CMD, USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE,
+ 0, hwarc->usb_iface->cur_altsetting->desc.bInterfaceNumber,
+ (void *) cmd, cmd_size, 100 /* FIXME: this is totally arbitrary */);
+}
+
+static
+int hwarc_reset(struct uwb_rc *uwb_rc)
+{
+ struct hwarc *hwarc = uwb_rc->priv;
+ int result;
+
+ /* device lock must be held when calling usb_reset_device. */
+ result = usb_lock_device_for_reset(hwarc->usb_dev, NULL);
+ if (result >= 0) {
+ result = usb_reset_device(hwarc->usb_dev);
+ usb_unlock_device(hwarc->usb_dev);
+ }
+
+ return result;
+}
+
+/**
+ * Callback for the notification and event endpoint
+ *
+ * Check's that everything is fine and then passes the read data to
+ * the notification/event handling mechanism (neh).
+ */
+static
+void hwarc_neep_cb(struct urb *urb)
+{
+ struct hwarc *hwarc = urb->context;
+ struct usb_interface *usb_iface = hwarc->usb_iface;
+ struct device *dev = &usb_iface->dev;
+ int result;
+
+ switch (result = urb->status) {
+ case 0:
+ uwb_rc_neh_grok(hwarc->uwb_rc, urb->transfer_buffer,
+ urb->actual_length);
+ break;
+ case -ECONNRESET: /* Not an error, but a controlled situation; */
+ case -ENOENT: /* (we killed the URB)...so, no broadcast */
+ goto out;
+ case -ESHUTDOWN: /* going away! */
+ goto out;
+ default: /* On general errors, retry unless it gets ugly */
+ if (edc_inc(&hwarc->neep_edc, EDC_MAX_ERRORS,
+ EDC_ERROR_TIMEFRAME))
+ goto error_exceeded;
+ dev_err(dev, "NEEP: URB error %d\n", urb->status);
+ }
+ result = usb_submit_urb(urb, GFP_ATOMIC);
+ if (result < 0 && result != -ENODEV && result != -EPERM) {
+ /* ignoring unrecoverable errors */
+ dev_err(dev, "NEEP: Can't resubmit URB (%d) resetting device\n",
+ result);
+ goto error;
+ }
+out:
+ return;
+
+error_exceeded:
+ dev_err(dev, "NEEP: URB max acceptable errors "
+ "exceeded, resetting device\n");
+error:
+ uwb_rc_neh_error(hwarc->uwb_rc, result);
+ uwb_rc_reset_all(hwarc->uwb_rc);
+ return;
+}
+
+static void hwarc_init(struct hwarc *hwarc)
+{
+ edc_init(&hwarc->neep_edc);
+}
+
+/**
+ * Initialize the notification/event endpoint stuff
+ *
+ * Note this is effectively a parallel thread; it knows that
+ * hwarc->uwb_rc always exists because the existence of a 'hwarc'
+ * means that there is a reverence on the hwarc->uwb_rc (see
+ * _probe()), and thus _neep_cb() can execute safely.
+ */
+static int hwarc_neep_init(struct uwb_rc *rc)
+{
+ struct hwarc *hwarc = rc->priv;
+ struct usb_interface *iface = hwarc->usb_iface;
+ struct usb_device *usb_dev = interface_to_usbdev(iface);
+ struct device *dev = &iface->dev;
+ int result;
+ struct usb_endpoint_descriptor *epd;
+
+ epd = &iface->cur_altsetting->endpoint[0].desc;
+ hwarc->rd_buffer = (void *) __get_free_page(GFP_KERNEL);
+ if (hwarc->rd_buffer == NULL) {
+ dev_err(dev, "Unable to allocate notification's read buffer\n");
+ goto error_rd_buffer;
+ }
+ hwarc->neep_urb = usb_alloc_urb(0, GFP_KERNEL);
+ if (hwarc->neep_urb == NULL) {
+ dev_err(dev, "Unable to allocate notification URB\n");
+ goto error_urb_alloc;
+ }
+ usb_fill_int_urb(hwarc->neep_urb, usb_dev,
+ usb_rcvintpipe(usb_dev, epd->bEndpointAddress),
+ hwarc->rd_buffer, PAGE_SIZE,
+ hwarc_neep_cb, hwarc, epd->bInterval);
+ result = usb_submit_urb(hwarc->neep_urb, GFP_ATOMIC);
+ if (result < 0) {
+ dev_err(dev, "Cannot submit notification URB: %d\n", result);
+ goto error_neep_submit;
+ }
+ return 0;
+
+error_neep_submit:
+ usb_free_urb(hwarc->neep_urb);
+ hwarc->neep_urb = NULL;
+error_urb_alloc:
+ free_page((unsigned long)hwarc->rd_buffer);
+ hwarc->rd_buffer = NULL;
+error_rd_buffer:
+ return -ENOMEM;
+}
+
+
+/** Clean up all the notification endpoint resources */
+static void hwarc_neep_release(struct uwb_rc *rc)
+{
+ struct hwarc *hwarc = rc->priv;
+
+ usb_kill_urb(hwarc->neep_urb);
+ usb_free_urb(hwarc->neep_urb);
+ hwarc->neep_urb = NULL;
+
+ free_page((unsigned long)hwarc->rd_buffer);
+ hwarc->rd_buffer = NULL;
+}
+
+/**
+ * Get the version from class-specific descriptor
+ *
+ * NOTE: this descriptor comes with the big bundled configuration
+ * descriptor that includes the interfaces' and endpoints', so
+ * we just look for it in the cached copy kept by the USB stack.
+ *
+ * NOTE2: We convert LE fields to CPU order.
+ */
+static int hwarc_get_version(struct uwb_rc *rc)
+{
+ int result;
+
+ struct hwarc *hwarc = rc->priv;
+ struct uwb_rc_control_intf_class_desc *descr;
+ struct device *dev = &rc->uwb_dev.dev;
+ struct usb_device *usb_dev = hwarc->usb_dev;
+ char *itr;
+ struct usb_descriptor_header *hdr;
+ size_t itr_size, actconfig_idx;
+ u16 version;
+
+ actconfig_idx = (usb_dev->actconfig - usb_dev->config) /
+ sizeof(usb_dev->config[0]);
+ itr = usb_dev->rawdescriptors[actconfig_idx];
+ itr_size = le16_to_cpu(usb_dev->actconfig->desc.wTotalLength);
+ while (itr_size >= sizeof(*hdr)) {
+ hdr = (struct usb_descriptor_header *) itr;
+ dev_dbg(dev, "Extra device descriptor: "
+ "type %02x/%u bytes @ %zu (%zu left)\n",
+ hdr->bDescriptorType, hdr->bLength,
+ (itr - usb_dev->rawdescriptors[actconfig_idx]),
+ itr_size);
+ if (hdr->bDescriptorType == USB_DT_CS_RADIO_CONTROL)
+ goto found;
+ itr += hdr->bLength;
+ itr_size -= hdr->bLength;
+ }
+ dev_err(dev, "cannot find Radio Control Interface Class descriptor\n");
+ return -ENODEV;
+
+found:
+ result = -EINVAL;
+ if (hdr->bLength > itr_size) { /* is it available? */
+ dev_err(dev, "incomplete Radio Control Interface Class "
+ "descriptor (%zu bytes left, %u needed)\n",
+ itr_size, hdr->bLength);
+ goto error;
+ }
+ if (hdr->bLength < sizeof(*descr)) {
+ dev_err(dev, "short Radio Control Interface Class "
+ "descriptor\n");
+ goto error;
+ }
+ descr = (struct uwb_rc_control_intf_class_desc *) hdr;
+ /* Make LE fields CPU order */
+ version = __le16_to_cpu(descr->bcdRCIVersion);
+ if (version != 0x0100) {
+ dev_err(dev, "Device reports protocol version 0x%04x. We "
+ "do not support that. \n", version);
+ result = -EINVAL;
+ goto error;
+ }
+ rc->version = version;
+ dev_dbg(dev, "Device supports WUSB protocol version 0x%04x \n", rc->version);
+ result = 0;
+error:
+ return result;
+}
+
+/*
+ * By creating a 'uwb_rc', we have a reference on it -- that reference
+ * is the one we drop when we disconnect.
+ *
+ * No need to switch altsettings; according to WUSB1.0[8.6.1.1], there
+ * is only one altsetting allowed.
+ */
+static int hwarc_probe(struct usb_interface *iface,
+ const struct usb_device_id *id)
+{
+ int result;
+ struct uwb_rc *uwb_rc;
+ struct hwarc *hwarc;
+ struct device *dev = &iface->dev;
+
+ result = -ENOMEM;
+ uwb_rc = uwb_rc_alloc();
+ if (uwb_rc == NULL) {
+ dev_err(dev, "unable to allocate RC instance\n");
+ goto error_rc_alloc;
+ }
+ hwarc = kzalloc(sizeof(*hwarc), GFP_KERNEL);
+ if (hwarc == NULL) {
+ dev_err(dev, "unable to allocate HWA RC instance\n");
+ goto error_alloc;
+ }
+ hwarc_init(hwarc);
+ hwarc->usb_dev = usb_get_dev(interface_to_usbdev(iface));
+ hwarc->usb_iface = usb_get_intf(iface);
+ hwarc->uwb_rc = uwb_rc;
+
+ uwb_rc->owner = THIS_MODULE;
+ uwb_rc->start = hwarc_neep_init;
+ uwb_rc->stop = hwarc_neep_release;
+ uwb_rc->cmd = hwarc_cmd;
+ uwb_rc->reset = hwarc_reset;
+ if (id->driver_info & WUSB_QUIRK_WHCI_CMD_EVT) {
+ uwb_rc->filter_cmd = NULL;
+ uwb_rc->filter_event = NULL;
+ } else {
+ uwb_rc->filter_cmd = hwarc_filter_cmd;
+ uwb_rc->filter_event = hwarc_filter_event;
+ }
+
+ result = uwb_rc_add(uwb_rc, dev, hwarc);
+ if (result < 0)
+ goto error_rc_add;
+ result = hwarc_get_version(uwb_rc);
+ if (result < 0) {
+ dev_err(dev, "cannot retrieve version of RC \n");
+ goto error_get_version;
+ }
+ usb_set_intfdata(iface, hwarc);
+ return 0;
+
+error_get_version:
+ uwb_rc_rm(uwb_rc);
+error_rc_add:
+ usb_put_intf(iface);
+ usb_put_dev(hwarc->usb_dev);
+error_alloc:
+ uwb_rc_put(uwb_rc);
+error_rc_alloc:
+ return result;
+}
+
+static void hwarc_disconnect(struct usb_interface *iface)
+{
+ struct hwarc *hwarc = usb_get_intfdata(iface);
+ struct uwb_rc *uwb_rc = hwarc->uwb_rc;
+
+ usb_set_intfdata(hwarc->usb_iface, NULL);
+ uwb_rc_rm(uwb_rc);
+ usb_put_intf(hwarc->usb_iface);
+ usb_put_dev(hwarc->usb_dev);
+ kfree(hwarc);
+ uwb_rc_put(uwb_rc); /* when creating the device, refcount = 1 */
+}
+
+static int hwarc_pre_reset(struct usb_interface *iface)
+{
+ struct hwarc *hwarc = usb_get_intfdata(iface);
+ struct uwb_rc *uwb_rc = hwarc->uwb_rc;
+
+ uwb_rc_pre_reset(uwb_rc);
+ return 0;
+}
+
+static int hwarc_post_reset(struct usb_interface *iface)
+{
+ struct hwarc *hwarc = usb_get_intfdata(iface);
+ struct uwb_rc *uwb_rc = hwarc->uwb_rc;
+
+ return uwb_rc_post_reset(uwb_rc);
+}
+
+/** USB device ID's that we handle */
+static const struct usb_device_id hwarc_id_table[] = {
+ /* D-Link DUB-1210 */
+ { USB_DEVICE_AND_INTERFACE_INFO(0x07d1, 0x3d02, 0xe0, 0x01, 0x02),
+ .driver_info = WUSB_QUIRK_WHCI_CMD_EVT },
+ /* Intel i1480 (using firmware 1.3PA2-20070828) */
+ { USB_DEVICE_AND_INTERFACE_INFO(0x8086, 0x0c3b, 0xe0, 0x01, 0x02),
+ .driver_info = WUSB_QUIRK_WHCI_CMD_EVT },
+ /* Alereon 5310 */
+ { USB_DEVICE_AND_INTERFACE_INFO(0x13dc, 0x5310, 0xe0, 0x01, 0x02),
+ .driver_info = WUSB_QUIRK_WHCI_CMD_EVT },
+ /* Alereon 5611 */
+ { USB_DEVICE_AND_INTERFACE_INFO(0x13dc, 0x5611, 0xe0, 0x01, 0x02),
+ .driver_info = WUSB_QUIRK_WHCI_CMD_EVT },
+ /* Generic match for the Radio Control interface */
+ { USB_INTERFACE_INFO(0xe0, 0x01, 0x02), },
+ { },
+};
+MODULE_DEVICE_TABLE(usb, hwarc_id_table);
+
+static struct usb_driver hwarc_driver = {
+ .name = "hwa-rc",
+ .id_table = hwarc_id_table,
+ .probe = hwarc_probe,
+ .disconnect = hwarc_disconnect,
+ .pre_reset = hwarc_pre_reset,
+ .post_reset = hwarc_post_reset,
+};
+
+module_usb_driver(hwarc_driver);
+
+MODULE_AUTHOR("Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>");
+MODULE_DESCRIPTION("Host Wireless Adapter Radio Control Driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/uwb/i1480/Makefile b/drivers/uwb/i1480/Makefile
new file mode 100644
index 000000000..d69da1684
--- /dev/null
+++ b/drivers/uwb/i1480/Makefile
@@ -0,0 +1 @@
+obj-$(CONFIG_UWB_I1480U) += dfu/ i1480-est.o
diff --git a/drivers/uwb/i1480/dfu/Makefile b/drivers/uwb/i1480/dfu/Makefile
new file mode 100644
index 000000000..bd1b9f254
--- /dev/null
+++ b/drivers/uwb/i1480/dfu/Makefile
@@ -0,0 +1,9 @@
+obj-$(CONFIG_UWB_I1480U) += i1480-dfu-usb.o
+
+i1480-dfu-usb-objs := \
+ dfu.o \
+ mac.o \
+ phy.o \
+ usb.o
+
+
diff --git a/drivers/uwb/i1480/dfu/dfu.c b/drivers/uwb/i1480/dfu/dfu.c
new file mode 100644
index 000000000..b08d1c2ee
--- /dev/null
+++ b/drivers/uwb/i1480/dfu/dfu.c
@@ -0,0 +1,212 @@
+/*
+ * Intel Wireless UWB Link 1480
+ * Main driver
+ *
+ * Copyright (C) 2005-2006 Intel Corporation
+ * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ *
+ *
+ * Common code for firmware upload used by the USB and PCI version;
+ * i1480_fw_upload() takes a device descriptor and uses the function
+ * pointers it provides to upload firmware and prepare the PHY.
+ *
+ * As well, provides common functions used by the rest of the code.
+ */
+#include "i1480-dfu.h"
+#include <linux/errno.h>
+#include <linux/delay.h>
+#include <linux/pci.h>
+#include <linux/device.h>
+#include <linux/uwb.h>
+#include <linux/random.h>
+#include <linux/export.h>
+
+/*
+ * i1480_rceb_check - Check RCEB for expected field values
+ * @i1480: pointer to device for which RCEB is being checked
+ * @rceb: RCEB being checked
+ * @cmd: which command the RCEB is related to
+ * @context: expected context
+ * @expected_type: expected event type
+ * @expected_event: expected event
+ *
+ * If @cmd is NULL, do not print error messages, but still return an error
+ * code.
+ *
+ * Return 0 if @rceb matches the expected values, -EINVAL otherwise.
+ */
+int i1480_rceb_check(const struct i1480 *i1480, const struct uwb_rceb *rceb,
+ const char *cmd, u8 context, u8 expected_type,
+ unsigned expected_event)
+{
+ int result = 0;
+ struct device *dev = i1480->dev;
+ if (rceb->bEventContext != context) {
+ if (cmd)
+ dev_err(dev, "%s: unexpected context id 0x%02x "
+ "(expected 0x%02x)\n", cmd,
+ rceb->bEventContext, context);
+ result = -EINVAL;
+ }
+ if (rceb->bEventType != expected_type) {
+ if (cmd)
+ dev_err(dev, "%s: unexpected event type 0x%02x "
+ "(expected 0x%02x)\n", cmd,
+ rceb->bEventType, expected_type);
+ result = -EINVAL;
+ }
+ if (le16_to_cpu(rceb->wEvent) != expected_event) {
+ if (cmd)
+ dev_err(dev, "%s: unexpected event 0x%04x "
+ "(expected 0x%04x)\n", cmd,
+ le16_to_cpu(rceb->wEvent), expected_event);
+ result = -EINVAL;
+ }
+ return result;
+}
+EXPORT_SYMBOL_GPL(i1480_rceb_check);
+
+
+/*
+ * Execute a Radio Control Command
+ *
+ * Command data has to be in i1480->cmd_buf.
+ *
+ * @returns size of the reply data filled in i1480->evt_buf or < 0 errno
+ * code on error.
+ */
+ssize_t i1480_cmd(struct i1480 *i1480, const char *cmd_name, size_t cmd_size,
+ size_t reply_size)
+{
+ ssize_t result;
+ struct uwb_rceb *reply = i1480->evt_buf;
+ struct uwb_rccb *cmd = i1480->cmd_buf;
+ u16 expected_event = reply->wEvent;
+ u8 expected_type = reply->bEventType;
+ u8 context;
+
+ init_completion(&i1480->evt_complete);
+ i1480->evt_result = -EINPROGRESS;
+ do {
+ get_random_bytes(&context, 1);
+ } while (context == 0x00 || context == 0xff);
+ cmd->bCommandContext = context;
+ result = i1480->cmd(i1480, cmd_name, cmd_size);
+ if (result < 0)
+ goto error;
+ /* wait for the callback to report a event was received */
+ result = wait_for_completion_interruptible_timeout(
+ &i1480->evt_complete, HZ);
+ if (result == 0) {
+ result = -ETIMEDOUT;
+ goto error;
+ }
+ if (result < 0)
+ goto error;
+ result = i1480->evt_result;
+ if (result < 0) {
+ dev_err(i1480->dev, "%s: command reply reception failed: %zd\n",
+ cmd_name, result);
+ goto error;
+ }
+ /*
+ * Firmware versions >= 1.4.12224 for IOGear GUWA100U generate a
+ * spurious notification after firmware is downloaded. So check whether
+ * the receibed RCEB is such notification before assuming that the
+ * command has failed.
+ */
+ if (i1480_rceb_check(i1480, i1480->evt_buf, NULL,
+ 0, 0xfd, 0x0022) == 0) {
+ /* Now wait for the actual RCEB for this command. */
+ result = i1480->wait_init_done(i1480);
+ if (result < 0)
+ goto error;
+ result = i1480->evt_result;
+ }
+ if (result != reply_size) {
+ dev_err(i1480->dev, "%s returned only %zu bytes, %zu expected\n",
+ cmd_name, result, reply_size);
+ result = -EINVAL;
+ goto error;
+ }
+ /* Verify we got the right event in response */
+ result = i1480_rceb_check(i1480, i1480->evt_buf, cmd_name, context,
+ expected_type, expected_event);
+error:
+ return result;
+}
+EXPORT_SYMBOL_GPL(i1480_cmd);
+
+
+static
+int i1480_print_state(struct i1480 *i1480)
+{
+ int result;
+ u32 *buf = (u32 *) i1480->cmd_buf;
+
+ result = i1480->read(i1480, 0x80080000, 2 * sizeof(*buf));
+ if (result < 0) {
+ dev_err(i1480->dev, "cannot read U & L states: %d\n", result);
+ goto error;
+ }
+ dev_info(i1480->dev, "state U 0x%08x, L 0x%08x\n", buf[0], buf[1]);
+error:
+ return result;
+}
+
+
+/*
+ * PCI probe, firmware uploader
+ *
+ * _mac_fw_upload() will call rc_setup(), which needs an rc_release().
+ */
+int i1480_fw_upload(struct i1480 *i1480)
+{
+ int result;
+
+ result = i1480_pre_fw_upload(i1480); /* PHY pre fw */
+ if (result < 0 && result != -ENOENT) {
+ i1480_print_state(i1480);
+ goto error;
+ }
+ result = i1480_mac_fw_upload(i1480); /* MAC fw */
+ if (result < 0) {
+ if (result == -ENOENT)
+ dev_err(i1480->dev, "Cannot locate MAC FW file '%s'\n",
+ i1480->mac_fw_name);
+ else
+ i1480_print_state(i1480);
+ goto error;
+ }
+ result = i1480_phy_fw_upload(i1480); /* PHY fw */
+ if (result < 0 && result != -ENOENT) {
+ i1480_print_state(i1480);
+ goto error_rc_release;
+ }
+ /*
+ * FIXME: find some reliable way to check whether firmware is running
+ * properly. Maybe use some standard request that has no side effects?
+ */
+ dev_info(i1480->dev, "firmware uploaded successfully\n");
+error_rc_release:
+ if (i1480->rc_release)
+ i1480->rc_release(i1480);
+ result = 0;
+error:
+ return result;
+}
+EXPORT_SYMBOL_GPL(i1480_fw_upload);
diff --git a/drivers/uwb/i1480/dfu/i1480-dfu.h b/drivers/uwb/i1480/dfu/i1480-dfu.h
new file mode 100644
index 000000000..3dc6b0922
--- /dev/null
+++ b/drivers/uwb/i1480/dfu/i1480-dfu.h
@@ -0,0 +1,260 @@
+/*
+ * i1480 Device Firmware Upload
+ *
+ * Copyright (C) 2005-2006 Intel Corporation
+ * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ *
+ *
+ * This driver is the firmware uploader for the Intel Wireless UWB
+ * Link 1480 device (both in the USB and PCI incarnations).
+ *
+ * The process is quite simple: we stop the device, write the firmware
+ * to its memory and then restart it. Wait for the device to let us
+ * know it is done booting firmware. Ready.
+ *
+ * We might have to upload before or after a phy firmware (which might
+ * be done in two methods, using a normal firmware image or through
+ * the MPI port).
+ *
+ * Because USB and PCI use common methods, we just make ops out of the
+ * common operations (read, write, wait_init_done and cmd) and
+ * implement them in usb.c and pci.c.
+ *
+ * The flow is (some parts omitted):
+ *
+ * i1480_{usb,pci}_probe() On enumerate/discovery
+ * i1480_fw_upload()
+ * i1480_pre_fw_upload()
+ * __mac_fw_upload()
+ * fw_hdrs_load()
+ * mac_fw_hdrs_push()
+ * i1480->write() [i1480_{usb,pci}_write()]
+ * i1480_fw_cmp()
+ * i1480->read() [i1480_{usb,pci}_read()]
+ * i1480_mac_fw_upload()
+ * __mac_fw_upload()
+ * i1480->setup(()
+ * i1480->wait_init_done()
+ * i1480_cmd_reset()
+ * i1480->cmd() [i1480_{usb,pci}_cmd()]
+ * ...
+ * i1480_phy_fw_upload()
+ * reject_firmware()
+ * i1480_mpi_write()
+ * i1480->cmd() [i1480_{usb,pci}_cmd()]
+ *
+ * Once the probe function enumerates the device and uploads the
+ * firmware, we just exit with -ENODEV, as we don't really want to
+ * attach to the device.
+ */
+#ifndef __i1480_DFU_H__
+#define __i1480_DFU_H__
+
+#include <linux/uwb/spec.h>
+#include <linux/types.h>
+#include <linux/completion.h>
+
+#define i1480_FW_UPLOAD_MODE_MASK (cpu_to_le32(0x00000018))
+
+#if i1480_FW > 0x00000302
+#define i1480_RCEB_EXTENDED
+#endif
+
+struct uwb_rccb;
+struct uwb_rceb;
+
+/*
+ * Common firmware upload handlers
+ *
+ * Normally you embed this struct in another one specific to your hw.
+ *
+ * @write Write to device's memory from buffer.
+ * @read Read from device's memory to i1480->evt_buf.
+ * @setup Setup device after basic firmware is uploaded
+ * @wait_init_done
+ * Wait for the device to send a notification saying init
+ * is done.
+ * @cmd FOP for issuing the command to the hardware. The
+ * command data is contained in i1480->cmd_buf and the size
+ * is supplied as an argument. The command replied is put
+ * in i1480->evt_buf and the size in i1480->evt_result (or if
+ * an error, a < 0 errno code).
+ *
+ * @cmd_buf Memory buffer used to send commands to the device.
+ * Allocated by the upper layers i1480_fw_upload().
+ * Size has to be @buf_size.
+ * @evt_buf Memory buffer used to place the async notifications
+ * received by the hw. Allocated by the upper layers
+ * i1480_fw_upload().
+ * Size has to be @buf_size.
+ * @cmd_complete
+ * Low level driver uses this to notify code waiting afor
+ * an event that the event has arrived and data is in
+ * i1480->evt_buf (and size/result in i1480->evt_result).
+ * @hw_rev
+ * Use this value to activate dfu code to support new revisions
+ * of hardware. i1480_init() sets this to a default value.
+ * It should be updated by the USB and PCI code.
+ */
+struct i1480 {
+ struct device *dev;
+
+ int (*write)(struct i1480 *, u32 addr, const void *, size_t);
+ int (*read)(struct i1480 *, u32 addr, size_t);
+ int (*rc_setup)(struct i1480 *);
+ void (*rc_release)(struct i1480 *);
+ int (*wait_init_done)(struct i1480 *);
+ int (*cmd)(struct i1480 *, const char *cmd_name, size_t cmd_size);
+ const char *pre_fw_name;
+ const char *mac_fw_name;
+ const char *mac_fw_name_deprecate; /* FIXME: Will go away */
+ const char *phy_fw_name;
+ u8 hw_rev;
+
+ size_t buf_size; /* size of both evt_buf and cmd_buf */
+ void *evt_buf, *cmd_buf;
+ ssize_t evt_result;
+ struct completion evt_complete;
+};
+
+static inline
+void i1480_init(struct i1480 *i1480)
+{
+ i1480->hw_rev = 1;
+ init_completion(&i1480->evt_complete);
+}
+
+extern int i1480_fw_upload(struct i1480 *);
+extern int i1480_pre_fw_upload(struct i1480 *);
+extern int i1480_mac_fw_upload(struct i1480 *);
+extern int i1480_phy_fw_upload(struct i1480 *);
+extern ssize_t i1480_cmd(struct i1480 *, const char *, size_t, size_t);
+extern int i1480_rceb_check(const struct i1480 *,
+ const struct uwb_rceb *, const char *, u8,
+ u8, unsigned);
+
+enum {
+ /* Vendor specific command type */
+ i1480_CET_VS1 = 0xfd,
+ /* i1480 commands */
+ i1480_CMD_SET_IP_MAS = 0x000e,
+ i1480_CMD_GET_MAC_PHY_INFO = 0x0003,
+ i1480_CMD_MPI_WRITE = 0x000f,
+ i1480_CMD_MPI_READ = 0x0010,
+ /* i1480 events */
+#if i1480_FW > 0x00000302
+ i1480_EVT_CONFIRM = 0x0002,
+ i1480_EVT_RM_INIT_DONE = 0x0101,
+ i1480_EVT_DEV_ADD = 0x0103,
+ i1480_EVT_DEV_RM = 0x0104,
+ i1480_EVT_DEV_ID_CHANGE = 0x0105,
+ i1480_EVT_GET_MAC_PHY_INFO = i1480_CMD_GET_MAC_PHY_INFO,
+#else
+ i1480_EVT_CONFIRM = 0x0002,
+ i1480_EVT_RM_INIT_DONE = 0x0101,
+ i1480_EVT_DEV_ADD = 0x0103,
+ i1480_EVT_DEV_RM = 0x0104,
+ i1480_EVT_DEV_ID_CHANGE = 0x0105,
+ i1480_EVT_GET_MAC_PHY_INFO = i1480_EVT_CONFIRM,
+#endif
+};
+
+
+struct i1480_evt_confirm {
+ struct uwb_rceb rceb;
+#ifdef i1480_RCEB_EXTENDED
+ __le16 wParamLength;
+#endif
+ u8 bResultCode;
+} __attribute__((packed));
+
+
+struct i1480_rceb {
+ struct uwb_rceb rceb;
+#ifdef i1480_RCEB_EXTENDED
+ __le16 wParamLength;
+#endif
+} __attribute__((packed));
+
+
+/**
+ * Get MAC & PHY Information confirm event structure
+ *
+ * Confirm event returned by the command.
+ */
+struct i1480_evt_confirm_GMPI {
+#if i1480_FW > 0x00000302
+ struct uwb_rceb rceb;
+ __le16 wParamLength;
+ __le16 status;
+ u8 mac_addr[6]; /* EUI-64 bit IEEE address [still 8 bytes?] */
+ u8 dev_addr[2];
+ __le16 mac_fw_rev; /* major = v >> 8; minor = v & 0xff */
+ u8 hw_rev;
+ u8 phy_vendor;
+ u8 phy_rev; /* major v = >> 8; minor = v & 0xff */
+ __le16 mac_caps;
+ u8 phy_caps[3];
+ u8 key_stores;
+ __le16 mcast_addr_stores;
+ u8 sec_mode_supported;
+#else
+ struct uwb_rceb rceb;
+ u8 status;
+ u8 mac_addr[8]; /* EUI-64 bit IEEE address [still 8 bytes?] */
+ u8 dev_addr[2];
+ __le16 mac_fw_rev; /* major = v >> 8; minor = v & 0xff */
+ __le16 phy_fw_rev; /* major v = >> 8; minor = v & 0xff */
+ __le16 mac_caps;
+ u8 phy_caps;
+ u8 key_stores;
+ __le16 mcast_addr_stores;
+ u8 sec_mode_supported;
+#endif
+} __attribute__((packed));
+
+
+struct i1480_cmd_mpi_write {
+ struct uwb_rccb rccb;
+ __le16 size;
+ u8 data[];
+};
+
+
+struct i1480_cmd_mpi_read {
+ struct uwb_rccb rccb;
+ __le16 size;
+ struct {
+ u8 page, offset;
+ } __attribute__((packed)) data[];
+} __attribute__((packed));
+
+
+struct i1480_evt_mpi_read {
+ struct uwb_rceb rceb;
+#ifdef i1480_RCEB_EXTENDED
+ __le16 wParamLength;
+#endif
+ u8 bResultCode;
+ __le16 size;
+ struct {
+ u8 page, offset, value;
+ } __attribute__((packed)) data[];
+} __attribute__((packed));
+
+
+#endif /* #ifndef __i1480_DFU_H__ */
diff --git a/drivers/uwb/i1480/dfu/mac.c b/drivers/uwb/i1480/dfu/mac.c
new file mode 100644
index 000000000..92028eec5
--- /dev/null
+++ b/drivers/uwb/i1480/dfu/mac.c
@@ -0,0 +1,510 @@
+/*
+ * Intel Wireless UWB Link 1480
+ * MAC Firmware upload implementation
+ *
+ * Copyright (C) 2005-2006 Intel Corporation
+ * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ *
+ *
+ * Implementation of the code for parsing the firmware file (extract
+ * the headers and binary code chunks) in the fw_*() functions. The
+ * code to upload pre and mac firmwares is the same, so it uses a
+ * common entry point in __mac_fw_upload(), which uses the i1480
+ * function pointers to push the firmware to the device.
+ */
+#include <linux/delay.h>
+#include <linux/firmware.h>
+#include <linux/slab.h>
+#include <linux/uwb.h>
+#include "i1480-dfu.h"
+
+/*
+ * Descriptor for a continuous segment of MAC fw data
+ */
+struct fw_hdr {
+ unsigned long address;
+ size_t length;
+ const u32 *bin;
+ struct fw_hdr *next;
+};
+
+
+/* Free a chain of firmware headers */
+static
+void fw_hdrs_free(struct fw_hdr *hdr)
+{
+ struct fw_hdr *next;
+
+ while (hdr) {
+ next = hdr->next;
+ kfree(hdr);
+ hdr = next;
+ }
+}
+
+
+/* Fill a firmware header descriptor from a memory buffer */
+static
+int fw_hdr_load(struct i1480 *i1480, struct fw_hdr *hdr, unsigned hdr_cnt,
+ const char *_data, const u32 *data_itr, const u32 *data_top)
+{
+ size_t hdr_offset = (const char *) data_itr - _data;
+ size_t remaining_size = (void *) data_top - (void *) data_itr;
+ if (data_itr + 2 > data_top) {
+ dev_err(i1480->dev, "fw hdr #%u/%zu: EOF reached in header at "
+ "offset %zu, limit %zu\n",
+ hdr_cnt, hdr_offset,
+ (const char *) data_itr + 2 - _data,
+ (const char *) data_top - _data);
+ return -EINVAL;
+ }
+ hdr->next = NULL;
+ hdr->address = le32_to_cpu(*data_itr++);
+ hdr->length = le32_to_cpu(*data_itr++);
+ hdr->bin = data_itr;
+ if (hdr->length > remaining_size) {
+ dev_err(i1480->dev, "fw hdr #%u/%zu: EOF reached in data; "
+ "chunk too long (%zu bytes), only %zu left\n",
+ hdr_cnt, hdr_offset, hdr->length, remaining_size);
+ return -EINVAL;
+ }
+ return 0;
+}
+
+
+/**
+ * Get a buffer where the firmware is supposed to be and create a
+ * chain of headers linking them together.
+ *
+ * @phdr: where to place the pointer to the first header (headers link
+ * to the next via the @hdr->next ptr); need to free the whole
+ * chain when done.
+ *
+ * @_data: Pointer to the data buffer.
+ *
+ * @_data_size: Size of the data buffer (bytes); data size has to be a
+ * multiple of 4. Function will fail if not.
+ *
+ * Goes over the whole binary blob; reads the first chunk and creates
+ * a fw hdr from it (which points to where the data is in @_data and
+ * the length of the chunk); then goes on to the next chunk until
+ * done. Each header is linked to the next.
+ */
+static
+int fw_hdrs_load(struct i1480 *i1480, struct fw_hdr **phdr,
+ const char *_data, size_t data_size)
+{
+ int result;
+ unsigned hdr_cnt = 0;
+ u32 *data = (u32 *) _data, *data_itr, *data_top;
+ struct fw_hdr *hdr, **prev_hdr = phdr;
+
+ result = -EINVAL;
+ /* Check size is ok and pointer is aligned */
+ if (data_size % sizeof(u32) != 0)
+ goto error;
+ if ((unsigned long) _data % sizeof(u16) != 0)
+ goto error;
+ *phdr = NULL;
+ data_itr = data;
+ data_top = (u32 *) (_data + data_size);
+ while (data_itr < data_top) {
+ result = -ENOMEM;
+ hdr = kmalloc(sizeof(*hdr), GFP_KERNEL);
+ if (hdr == NULL) {
+ dev_err(i1480->dev, "Cannot allocate fw header "
+ "for chunk #%u\n", hdr_cnt);
+ goto error_alloc;
+ }
+ result = fw_hdr_load(i1480, hdr, hdr_cnt,
+ _data, data_itr, data_top);
+ if (result < 0)
+ goto error_load;
+ data_itr += 2 + hdr->length;
+ *prev_hdr = hdr;
+ prev_hdr = &hdr->next;
+ hdr_cnt++;
+ };
+ *prev_hdr = NULL;
+ return 0;
+
+error_load:
+ kfree(hdr);
+error_alloc:
+ fw_hdrs_free(*phdr);
+error:
+ return result;
+}
+
+
+/**
+ * Compares a chunk of fw with one in the devices's memory
+ *
+ * @i1480: Device instance
+ * @hdr: Pointer to the firmware chunk
+ * @returns: 0 if equal, < 0 errno on error. If > 0, it is the offset
+ * where the difference was found (plus one).
+ *
+ * Kind of dirty and simplistic, but does the trick in both the PCI
+ * and USB version. We do a quick[er] memcmp(), and if it fails, we do
+ * a byte-by-byte to find the offset.
+ */
+static
+ssize_t i1480_fw_cmp(struct i1480 *i1480, struct fw_hdr *hdr)
+{
+ ssize_t result = 0;
+ u32 src_itr = 0, cnt;
+ size_t size = hdr->length*sizeof(hdr->bin[0]);
+ size_t chunk_size;
+ u8 *bin = (u8 *) hdr->bin;
+
+ while (size > 0) {
+ chunk_size = size < i1480->buf_size ? size : i1480->buf_size;
+ result = i1480->read(i1480, hdr->address + src_itr, chunk_size);
+ if (result < 0) {
+ dev_err(i1480->dev, "error reading for verification: "
+ "%zd\n", result);
+ goto error;
+ }
+ if (memcmp(i1480->cmd_buf, bin + src_itr, result)) {
+ u8 *buf = i1480->cmd_buf;
+ for (cnt = 0; cnt < result; cnt++)
+ if (bin[src_itr + cnt] != buf[cnt]) {
+ dev_err(i1480->dev, "byte failed at "
+ "src_itr %u cnt %u [0x%02x "
+ "vs 0x%02x]\n", src_itr, cnt,
+ bin[src_itr + cnt], buf[cnt]);
+ result = src_itr + cnt + 1;
+ goto cmp_failed;
+ }
+ }
+ src_itr += result;
+ size -= result;
+ }
+ result = 0;
+error:
+cmp_failed:
+ return result;
+}
+
+
+/**
+ * Writes firmware headers to the device.
+ *
+ * @prd: PRD instance
+ * @hdr: Processed firmware
+ * @returns: 0 if ok, < 0 errno on error.
+ */
+static
+int mac_fw_hdrs_push(struct i1480 *i1480, struct fw_hdr *hdr,
+ const char *fw_name, const char *fw_tag)
+{
+ struct device *dev = i1480->dev;
+ ssize_t result = 0;
+ struct fw_hdr *hdr_itr;
+ int verif_retry_count;
+
+ /* Now, header by header, push them to the hw */
+ for (hdr_itr = hdr; hdr_itr != NULL; hdr_itr = hdr_itr->next) {
+ verif_retry_count = 0;
+retry:
+ dev_dbg(dev, "fw chunk (%zu @ 0x%08lx)\n",
+ hdr_itr->length * sizeof(hdr_itr->bin[0]),
+ hdr_itr->address);
+ result = i1480->write(i1480, hdr_itr->address, hdr_itr->bin,
+ hdr_itr->length*sizeof(hdr_itr->bin[0]));
+ if (result < 0) {
+ dev_err(dev, "%s fw '%s': write failed (%zuB @ 0x%lx):"
+ " %zd\n", fw_tag, fw_name,
+ hdr_itr->length * sizeof(hdr_itr->bin[0]),
+ hdr_itr->address, result);
+ break;
+ }
+ result = i1480_fw_cmp(i1480, hdr_itr);
+ if (result < 0) {
+ dev_err(dev, "%s fw '%s': verification read "
+ "failed (%zuB @ 0x%lx): %zd\n",
+ fw_tag, fw_name,
+ hdr_itr->length * sizeof(hdr_itr->bin[0]),
+ hdr_itr->address, result);
+ break;
+ }
+ if (result > 0) { /* Offset where it failed + 1 */
+ result--;
+ dev_err(dev, "%s fw '%s': WARNING: verification "
+ "failed at 0x%lx: retrying\n",
+ fw_tag, fw_name, hdr_itr->address + result);
+ if (++verif_retry_count < 3)
+ goto retry; /* write this block again! */
+ dev_err(dev, "%s fw '%s': verification failed at 0x%lx: "
+ "tried %d times\n", fw_tag, fw_name,
+ hdr_itr->address + result, verif_retry_count);
+ result = -EINVAL;
+ break;
+ }
+ }
+ return result;
+}
+
+
+/** Puts the device in firmware upload mode.*/
+static
+int mac_fw_upload_enable(struct i1480 *i1480)
+{
+ int result;
+ u32 reg = 0x800000c0;
+ u32 *buffer = (u32 *)i1480->cmd_buf;
+
+ if (i1480->hw_rev > 1)
+ reg = 0x8000d0d4;
+ result = i1480->read(i1480, reg, sizeof(u32));
+ if (result < 0)
+ goto error_cmd;
+ *buffer &= ~i1480_FW_UPLOAD_MODE_MASK;
+ result = i1480->write(i1480, reg, buffer, sizeof(u32));
+ if (result < 0)
+ goto error_cmd;
+ return 0;
+error_cmd:
+ dev_err(i1480->dev, "can't enable fw upload mode: %d\n", result);
+ return result;
+}
+
+
+/** Gets the device out of firmware upload mode. */
+static
+int mac_fw_upload_disable(struct i1480 *i1480)
+{
+ int result;
+ u32 reg = 0x800000c0;
+ u32 *buffer = (u32 *)i1480->cmd_buf;
+
+ if (i1480->hw_rev > 1)
+ reg = 0x8000d0d4;
+ result = i1480->read(i1480, reg, sizeof(u32));
+ if (result < 0)
+ goto error_cmd;
+ *buffer |= i1480_FW_UPLOAD_MODE_MASK;
+ result = i1480->write(i1480, reg, buffer, sizeof(u32));
+ if (result < 0)
+ goto error_cmd;
+ return 0;
+error_cmd:
+ dev_err(i1480->dev, "can't disable fw upload mode: %d\n", result);
+ return result;
+}
+
+
+
+/**
+ * Generic function for uploading a MAC firmware.
+ *
+ * @i1480: Device instance
+ * @fw_name: Name of firmware file to upload.
+ * @fw_tag: Name of the firmware type (for messages)
+ * [eg: MAC, PRE]
+ * @do_wait: Wait for device to emit initialization done message (0
+ * for PRE fws, 1 for MAC fws).
+ * @returns: 0 if ok, < 0 errno on error.
+ */
+static
+int __mac_fw_upload(struct i1480 *i1480, const char *fw_name,
+ const char *fw_tag)
+{
+ int result;
+ const struct firmware *fw;
+ struct fw_hdr *fw_hdrs;
+
+ result = reject_firmware(&fw, fw_name, i1480->dev);
+ if (result < 0) /* Up to caller to complain on -ENOENT */
+ goto out;
+ result = fw_hdrs_load(i1480, &fw_hdrs, fw->data, fw->size);
+ if (result < 0) {
+ dev_err(i1480->dev, "%s fw '%s': failed to parse firmware "
+ "file: %d\n", fw_tag, fw_name, result);
+ goto out_release;
+ }
+ result = mac_fw_upload_enable(i1480);
+ if (result < 0)
+ goto out_hdrs_release;
+ result = mac_fw_hdrs_push(i1480, fw_hdrs, fw_name, fw_tag);
+ mac_fw_upload_disable(i1480);
+out_hdrs_release:
+ if (result >= 0)
+ dev_info(i1480->dev, "%s fw '%s': uploaded\n", fw_tag, fw_name);
+ else
+ dev_err(i1480->dev, "%s fw '%s': failed to upload (%d), "
+ "power cycle device\n", fw_tag, fw_name, result);
+ fw_hdrs_free(fw_hdrs);
+out_release:
+ release_firmware(fw);
+out:
+ return result;
+}
+
+
+/**
+ * Upload a pre-PHY firmware
+ *
+ */
+int i1480_pre_fw_upload(struct i1480 *i1480)
+{
+ int result;
+ result = __mac_fw_upload(i1480, i1480->pre_fw_name, "PRE");
+ if (result == 0)
+ msleep(400);
+ return result;
+}
+
+
+/**
+ * Reset a the MAC and PHY
+ *
+ * @i1480: Device's instance
+ * @returns: 0 if ok, < 0 errno code on error
+ *
+ * We put the command on kmalloc'ed memory as some arches cannot do
+ * USB from the stack. The reply event is copied from an stage buffer,
+ * so it can be in the stack. See WUSB1.0[8.6.2.4] for more details.
+ *
+ * We issue the reset to make sure the UWB controller reinits the PHY;
+ * this way we can now if the PHY init went ok.
+ */
+static
+int i1480_cmd_reset(struct i1480 *i1480)
+{
+ int result;
+ struct uwb_rccb *cmd = (void *) i1480->cmd_buf;
+ struct i1480_evt_reset {
+ struct uwb_rceb rceb;
+ u8 bResultCode;
+ } __attribute__((packed)) *reply = (void *) i1480->evt_buf;
+
+ result = -ENOMEM;
+ cmd->bCommandType = UWB_RC_CET_GENERAL;
+ cmd->wCommand = cpu_to_le16(UWB_RC_CMD_RESET);
+ reply->rceb.bEventType = UWB_RC_CET_GENERAL;
+ reply->rceb.wEvent = UWB_RC_CMD_RESET;
+ result = i1480_cmd(i1480, "RESET", sizeof(*cmd), sizeof(*reply));
+ if (result < 0)
+ goto out;
+ if (reply->bResultCode != UWB_RC_RES_SUCCESS) {
+ dev_err(i1480->dev, "RESET: command execution failed: %u\n",
+ reply->bResultCode);
+ result = -EIO;
+ }
+out:
+ return result;
+
+}
+
+
+/* Wait for the MAC FW to start running */
+static
+int i1480_fw_is_running_q(struct i1480 *i1480)
+{
+ int cnt = 0;
+ int result;
+ u32 *val = (u32 *) i1480->cmd_buf;
+
+ for (cnt = 0; cnt < 10; cnt++) {
+ msleep(100);
+ result = i1480->read(i1480, 0x80080000, 4);
+ if (result < 0) {
+ dev_err(i1480->dev, "Can't read 0x8008000: %d\n", result);
+ goto out;
+ }
+ if (*val == 0x55555555UL) /* fw running? cool */
+ goto out;
+ }
+ dev_err(i1480->dev, "Timed out waiting for fw to start\n");
+ result = -ETIMEDOUT;
+out:
+ return result;
+
+}
+
+
+/**
+ * Upload MAC firmware, wait for it to start
+ *
+ * @i1480: Device instance
+ * @fw_name: Name of the file that contains the firmware
+ *
+ * This has to be called after the pre fw has been uploaded (if
+ * there is any).
+ */
+int i1480_mac_fw_upload(struct i1480 *i1480)
+{
+ int result = 0, deprecated_name = 0;
+ struct i1480_rceb *rcebe = (void *) i1480->evt_buf;
+
+ result = __mac_fw_upload(i1480, i1480->mac_fw_name, "MAC");
+ if (result == -ENOENT) {
+ result = __mac_fw_upload(i1480, i1480->mac_fw_name_deprecate,
+ "MAC");
+ deprecated_name = 1;
+ }
+ if (result < 0)
+ return result;
+ if (deprecated_name == 1)
+ dev_warn(i1480->dev,
+ "WARNING: firmware file name %s is deprecated, "
+ "please rename to %s\n",
+ i1480->mac_fw_name_deprecate, i1480->mac_fw_name);
+ result = i1480_fw_is_running_q(i1480);
+ if (result < 0)
+ goto error_fw_not_running;
+ result = i1480->rc_setup ? i1480->rc_setup(i1480) : 0;
+ if (result < 0) {
+ dev_err(i1480->dev, "Cannot setup after MAC fw upload: %d\n",
+ result);
+ goto error_setup;
+ }
+ result = i1480->wait_init_done(i1480); /* wait init'on */
+ if (result < 0) {
+ dev_err(i1480->dev, "MAC fw '%s': Initialization timed out "
+ "(%d)\n", i1480->mac_fw_name, result);
+ goto error_init_timeout;
+ }
+ /* verify we got the right initialization done event */
+ if (i1480->evt_result != sizeof(*rcebe)) {
+ dev_err(i1480->dev, "MAC fw '%s': initialization event returns "
+ "wrong size (%zu bytes vs %zu needed)\n",
+ i1480->mac_fw_name, i1480->evt_result, sizeof(*rcebe));
+ goto error_size;
+ }
+ result = -EIO;
+ if (i1480_rceb_check(i1480, &rcebe->rceb, NULL, 0, i1480_CET_VS1,
+ i1480_EVT_RM_INIT_DONE) < 0) {
+ dev_err(i1480->dev, "wrong initialization event 0x%02x/%04x/%02x "
+ "received; expected 0x%02x/%04x/00\n",
+ rcebe->rceb.bEventType, le16_to_cpu(rcebe->rceb.wEvent),
+ rcebe->rceb.bEventContext, i1480_CET_VS1,
+ i1480_EVT_RM_INIT_DONE);
+ goto error_init_timeout;
+ }
+ result = i1480_cmd_reset(i1480);
+ if (result < 0)
+ dev_err(i1480->dev, "MAC fw '%s': MBOA reset failed (%d)\n",
+ i1480->mac_fw_name, result);
+error_fw_not_running:
+error_init_timeout:
+error_size:
+error_setup:
+ return result;
+}
diff --git a/drivers/uwb/i1480/dfu/phy.c b/drivers/uwb/i1480/dfu/phy.c
new file mode 100644
index 000000000..265a5b9a5
--- /dev/null
+++ b/drivers/uwb/i1480/dfu/phy.c
@@ -0,0 +1,203 @@
+/*
+ * Intel Wireless UWB Link 1480
+ * PHY parameters upload
+ *
+ * Copyright (C) 2005-2006 Intel Corporation
+ * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ *
+ *
+ * Code for uploading the PHY parameters to the PHY through the UWB
+ * Radio Control interface.
+ *
+ * We just send the data through the MPI interface using HWA-like
+ * commands and then reset the PHY to make sure it is ok.
+ */
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/firmware.h>
+#include <linux/usb/wusb.h>
+#include "i1480-dfu.h"
+
+
+/**
+ * Write a value array to an address of the MPI interface
+ *
+ * @i1480: Device descriptor
+ * @data: Data array to write
+ * @size: Size of the data array
+ * @returns: 0 if ok, < 0 errno code on error.
+ *
+ * The data array is organized into pairs:
+ *
+ * ADDRESS VALUE
+ *
+ * ADDRESS is BE 16 bit unsigned, VALUE 8 bit unsigned. Size thus has
+ * to be a multiple of three.
+ */
+static
+int i1480_mpi_write(struct i1480 *i1480, const void *data, size_t size)
+{
+ int result;
+ struct i1480_cmd_mpi_write *cmd = i1480->cmd_buf;
+ struct i1480_evt_confirm *reply = i1480->evt_buf;
+
+ BUG_ON(size > 480);
+ result = -ENOMEM;
+ cmd->rccb.bCommandType = i1480_CET_VS1;
+ cmd->rccb.wCommand = cpu_to_le16(i1480_CMD_MPI_WRITE);
+ cmd->size = cpu_to_le16(size);
+ memcpy(cmd->data, data, size);
+ reply->rceb.bEventType = i1480_CET_VS1;
+ reply->rceb.wEvent = i1480_CMD_MPI_WRITE;
+ result = i1480_cmd(i1480, "MPI-WRITE", sizeof(*cmd) + size, sizeof(*reply));
+ if (result < 0)
+ goto out;
+ if (reply->bResultCode != UWB_RC_RES_SUCCESS) {
+ dev_err(i1480->dev, "MPI-WRITE: command execution failed: %d\n",
+ reply->bResultCode);
+ result = -EIO;
+ }
+out:
+ return result;
+}
+
+
+/**
+ * Read a value array to from an address of the MPI interface
+ *
+ * @i1480: Device descriptor
+ * @data: where to place the read array
+ * @srcaddr: Where to read from
+ * @size: Size of the data read array
+ * @returns: 0 if ok, < 0 errno code on error.
+ *
+ * The command data array is organized into pairs ADDR0 ADDR1..., and
+ * the returned data in ADDR0 VALUE0 ADDR1 VALUE1...
+ *
+ * We generate the command array to be a sequential read and then
+ * rearrange the result.
+ *
+ * We use the i1480->cmd_buf for the command, i1480->evt_buf for the reply.
+ *
+ * As the reply has to fit in 512 bytes (i1480->evt_buffer), the max amount
+ * of values we can read is (512 - sizeof(*reply)) / 3
+ */
+static
+int i1480_mpi_read(struct i1480 *i1480, u8 *data, u16 srcaddr, size_t size)
+{
+ int result;
+ struct i1480_cmd_mpi_read *cmd = i1480->cmd_buf;
+ struct i1480_evt_mpi_read *reply = i1480->evt_buf;
+ unsigned cnt;
+
+ memset(i1480->cmd_buf, 0x69, 512);
+ memset(i1480->evt_buf, 0x69, 512);
+
+ BUG_ON(size > (i1480->buf_size - sizeof(*reply)) / 3);
+ result = -ENOMEM;
+ cmd->rccb.bCommandType = i1480_CET_VS1;
+ cmd->rccb.wCommand = cpu_to_le16(i1480_CMD_MPI_READ);
+ cmd->size = cpu_to_le16(3*size);
+ for (cnt = 0; cnt < size; cnt++) {
+ cmd->data[cnt].page = (srcaddr + cnt) >> 8;
+ cmd->data[cnt].offset = (srcaddr + cnt) & 0xff;
+ }
+ reply->rceb.bEventType = i1480_CET_VS1;
+ reply->rceb.wEvent = i1480_CMD_MPI_READ;
+ result = i1480_cmd(i1480, "MPI-READ", sizeof(*cmd) + 2*size,
+ sizeof(*reply) + 3*size);
+ if (result < 0)
+ goto out;
+ if (reply->bResultCode != UWB_RC_RES_SUCCESS) {
+ dev_err(i1480->dev, "MPI-READ: command execution failed: %d\n",
+ reply->bResultCode);
+ result = -EIO;
+ }
+ for (cnt = 0; cnt < size; cnt++) {
+ if (reply->data[cnt].page != (srcaddr + cnt) >> 8)
+ dev_err(i1480->dev, "MPI-READ: page inconsistency at "
+ "index %u: expected 0x%02x, got 0x%02x\n", cnt,
+ (srcaddr + cnt) >> 8, reply->data[cnt].page);
+ if (reply->data[cnt].offset != ((srcaddr + cnt) & 0x00ff))
+ dev_err(i1480->dev, "MPI-READ: offset inconsistency at "
+ "index %u: expected 0x%02x, got 0x%02x\n", cnt,
+ (srcaddr + cnt) & 0x00ff,
+ reply->data[cnt].offset);
+ data[cnt] = reply->data[cnt].value;
+ }
+ result = 0;
+out:
+ return result;
+}
+
+
+/**
+ * Upload a PHY firmware, wait for it to start
+ *
+ * @i1480: Device instance
+ * @fw_name: Name of the file that contains the firmware
+ *
+ * We assume the MAC fw is up and running. This means we can use the
+ * MPI interface to write the PHY firmware. Once done, we issue an
+ * MBOA Reset, which will force the MAC to reset and reinitialize the
+ * PHY. If that works, we are ready to go.
+ *
+ * Max packet size for the MPI write is 512, so the max buffer is 480
+ * (which gives us 160 byte triads of MSB, LSB and VAL for the data).
+ */
+int i1480_phy_fw_upload(struct i1480 *i1480)
+{
+ int result;
+ const struct firmware *fw;
+ const char *data_itr, *data_top;
+ const size_t MAX_BLK_SIZE = 480; /* 160 triads */
+ size_t data_size;
+ u8 phy_stat;
+
+ result = reject_firmware(&fw, i1480->phy_fw_name, i1480->dev);
+ if (result < 0)
+ goto out;
+ /* Loop writing data in chunks as big as possible until done. */
+ for (data_itr = fw->data, data_top = data_itr + fw->size;
+ data_itr < data_top; data_itr += MAX_BLK_SIZE) {
+ data_size = min(MAX_BLK_SIZE, (size_t) (data_top - data_itr));
+ result = i1480_mpi_write(i1480, data_itr, data_size);
+ if (result < 0)
+ goto error_mpi_write;
+ }
+ /* Read MPI page 0, offset 6; if 0, PHY was initialized correctly. */
+ result = i1480_mpi_read(i1480, &phy_stat, 0x0006, 1);
+ if (result < 0) {
+ dev_err(i1480->dev, "PHY: can't get status: %d\n", result);
+ goto error_mpi_status;
+ }
+ if (phy_stat != 0) {
+ result = -ENODEV;
+ dev_info(i1480->dev, "error, PHY not ready: %u\n", phy_stat);
+ goto error_phy_status;
+ }
+ dev_info(i1480->dev, "PHY fw '%s': uploaded\n", i1480->phy_fw_name);
+error_phy_status:
+error_mpi_status:
+error_mpi_write:
+ release_firmware(fw);
+ if (result < 0)
+ dev_err(i1480->dev, "PHY fw '%s': failed to upload (%d), "
+ "power cycle device\n", i1480->phy_fw_name, result);
+out:
+ return result;
+}
diff --git a/drivers/uwb/i1480/dfu/usb.c b/drivers/uwb/i1480/dfu/usb.c
new file mode 100644
index 000000000..c311f5f6c
--- /dev/null
+++ b/drivers/uwb/i1480/dfu/usb.c
@@ -0,0 +1,456 @@
+/*
+ * Intel Wireless UWB Link 1480
+ * USB SKU firmware upload implementation
+ *
+ * Copyright (C) 2005-2006 Intel Corporation
+ * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ *
+ *
+ * This driver will prepare the i1480 device to behave as a real
+ * Wireless USB HWA adaptor by uploading the firmware.
+ *
+ * When the device is connected or driver is loaded, i1480_usb_probe()
+ * is called--this will allocate and initialize the device structure,
+ * fill in the pointers to the common functions (read, write,
+ * wait_init_done and cmd for HWA command execution) and once that is
+ * done, call the common firmware uploading routine. Then clean up and
+ * return -ENODEV, as we don't attach to the device.
+ *
+ * The rest are the basic ops we implement that the fw upload code
+ * uses to do its job. All the ops in the common code are i1480->NAME,
+ * the functions are i1480_usb_NAME().
+ */
+#include <linux/module.h>
+#include <linux/usb.h>
+#include <linux/interrupt.h>
+#include <linux/slab.h>
+#include <linux/delay.h>
+#include <linux/uwb.h>
+#include <linux/usb/wusb.h>
+#include <linux/usb/wusb-wa.h>
+#include "i1480-dfu.h"
+
+struct i1480_usb {
+ struct i1480 i1480;
+ struct usb_device *usb_dev;
+ struct usb_interface *usb_iface;
+ struct urb *neep_urb; /* URB for reading from EP1 */
+};
+
+
+static
+void i1480_usb_init(struct i1480_usb *i1480_usb)
+{
+ i1480_init(&i1480_usb->i1480);
+}
+
+
+static
+int i1480_usb_create(struct i1480_usb *i1480_usb, struct usb_interface *iface)
+{
+ struct usb_device *usb_dev = interface_to_usbdev(iface);
+ int result = -ENOMEM;
+
+ i1480_usb->usb_dev = usb_get_dev(usb_dev); /* bind the USB device */
+ i1480_usb->usb_iface = usb_get_intf(iface);
+ usb_set_intfdata(iface, i1480_usb); /* Bind the driver to iface0 */
+ i1480_usb->neep_urb = usb_alloc_urb(0, GFP_KERNEL);
+ if (i1480_usb->neep_urb == NULL)
+ goto error;
+ return 0;
+
+error:
+ usb_set_intfdata(iface, NULL);
+ usb_put_intf(iface);
+ usb_put_dev(usb_dev);
+ return result;
+}
+
+
+static
+void i1480_usb_destroy(struct i1480_usb *i1480_usb)
+{
+ usb_kill_urb(i1480_usb->neep_urb);
+ usb_free_urb(i1480_usb->neep_urb);
+ usb_set_intfdata(i1480_usb->usb_iface, NULL);
+ usb_put_intf(i1480_usb->usb_iface);
+ usb_put_dev(i1480_usb->usb_dev);
+}
+
+
+/**
+ * Write a buffer to a memory address in the i1480 device
+ *
+ * @i1480: i1480 instance
+ * @memory_address:
+ * Address where to write the data buffer to.
+ * @buffer: Buffer to the data
+ * @size: Size of the buffer [has to be < 512].
+ * @returns: 0 if ok, < 0 errno code on error.
+ *
+ * Data buffers to USB cannot be on the stack or in vmalloc'ed areas,
+ * so we copy it to the local i1480 buffer before proceeding. In any
+ * case, we have a max size we can send.
+ */
+static
+int i1480_usb_write(struct i1480 *i1480, u32 memory_address,
+ const void *buffer, size_t size)
+{
+ int result = 0;
+ struct i1480_usb *i1480_usb = container_of(i1480, struct i1480_usb, i1480);
+ size_t buffer_size, itr = 0;
+
+ BUG_ON(size & 0x3); /* Needs to be a multiple of 4 */
+ while (size > 0) {
+ buffer_size = size < i1480->buf_size ? size : i1480->buf_size;
+ memcpy(i1480->cmd_buf, buffer + itr, buffer_size);
+ result = usb_control_msg(
+ i1480_usb->usb_dev, usb_sndctrlpipe(i1480_usb->usb_dev, 0),
+ 0xf0, USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
+ memory_address, (memory_address >> 16),
+ i1480->cmd_buf, buffer_size, 100 /* FIXME: arbitrary */);
+ if (result < 0)
+ break;
+ itr += result;
+ memory_address += result;
+ size -= result;
+ }
+ return result;
+}
+
+
+/**
+ * Read a block [max size 512] of the device's memory to @i1480's buffer.
+ *
+ * @i1480: i1480 instance
+ * @memory_address:
+ * Address where to read from.
+ * @size: Size to read. Smaller than or equal to 512.
+ * @returns: >= 0 number of bytes written if ok, < 0 errno code on error.
+ *
+ * NOTE: if the memory address or block is incorrect, you might get a
+ * stall or a different memory read. Caller has to verify the
+ * memory address and size passed back in the @neh structure.
+ */
+static
+int i1480_usb_read(struct i1480 *i1480, u32 addr, size_t size)
+{
+ ssize_t result = 0, bytes = 0;
+ size_t itr, read_size = i1480->buf_size;
+ struct i1480_usb *i1480_usb = container_of(i1480, struct i1480_usb, i1480);
+
+ BUG_ON(size > i1480->buf_size);
+ BUG_ON(size & 0x3); /* Needs to be a multiple of 4 */
+ BUG_ON(read_size > 512);
+
+ if (addr >= 0x8000d200 && addr < 0x8000d400) /* Yeah, HW quirk */
+ read_size = 4;
+
+ for (itr = 0; itr < size; itr += read_size) {
+ size_t itr_addr = addr + itr;
+ size_t itr_size = min(read_size, size - itr);
+ result = usb_control_msg(
+ i1480_usb->usb_dev, usb_rcvctrlpipe(i1480_usb->usb_dev, 0),
+ 0xf0, USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
+ itr_addr, (itr_addr >> 16),
+ i1480->cmd_buf + itr, itr_size,
+ 100 /* FIXME: arbitrary */);
+ if (result < 0) {
+ dev_err(i1480->dev, "%s: USB read error: %zd\n",
+ __func__, result);
+ goto out;
+ }
+ if (result != itr_size) {
+ result = -EIO;
+ dev_err(i1480->dev,
+ "%s: partial read got only %zu bytes vs %zu expected\n",
+ __func__, result, itr_size);
+ goto out;
+ }
+ bytes += result;
+ }
+ result = bytes;
+out:
+ return result;
+}
+
+
+/**
+ * Callback for reads on the notification/event endpoint
+ *
+ * Just enables the completion read handler.
+ */
+static
+void i1480_usb_neep_cb(struct urb *urb)
+{
+ struct i1480 *i1480 = urb->context;
+ struct device *dev = i1480->dev;
+
+ switch (urb->status) {
+ case 0:
+ break;
+ case -ECONNRESET: /* Not an error, but a controlled situation; */
+ case -ENOENT: /* (we killed the URB)...so, no broadcast */
+ dev_dbg(dev, "NEEP: reset/noent %d\n", urb->status);
+ break;
+ case -ESHUTDOWN: /* going away! */
+ dev_dbg(dev, "NEEP: down %d\n", urb->status);
+ break;
+ default:
+ dev_err(dev, "NEEP: unknown status %d\n", urb->status);
+ break;
+ }
+ i1480->evt_result = urb->actual_length;
+ complete(&i1480->evt_complete);
+ return;
+}
+
+
+/**
+ * Wait for the MAC FW to initialize
+ *
+ * MAC FW sends a 0xfd/0101/00 notification to EP1 when done
+ * initializing. Get that notification into i1480->evt_buf; upper layer
+ * will verify it.
+ *
+ * Set i1480->evt_result with the result of getting the event or its
+ * size (if successful).
+ *
+ * Delivers the data directly to i1480->evt_buf
+ */
+static
+int i1480_usb_wait_init_done(struct i1480 *i1480)
+{
+ int result;
+ struct device *dev = i1480->dev;
+ struct i1480_usb *i1480_usb = container_of(i1480, struct i1480_usb, i1480);
+ struct usb_endpoint_descriptor *epd;
+
+ init_completion(&i1480->evt_complete);
+ i1480->evt_result = -EINPROGRESS;
+ epd = &i1480_usb->usb_iface->cur_altsetting->endpoint[0].desc;
+ usb_fill_int_urb(i1480_usb->neep_urb, i1480_usb->usb_dev,
+ usb_rcvintpipe(i1480_usb->usb_dev, epd->bEndpointAddress),
+ i1480->evt_buf, i1480->buf_size,
+ i1480_usb_neep_cb, i1480, epd->bInterval);
+ result = usb_submit_urb(i1480_usb->neep_urb, GFP_KERNEL);
+ if (result < 0) {
+ dev_err(dev, "init done: cannot submit NEEP read: %d\n",
+ result);
+ goto error_submit;
+ }
+ /* Wait for the USB callback to get the data */
+ result = wait_for_completion_interruptible_timeout(
+ &i1480->evt_complete, HZ);
+ if (result <= 0) {
+ result = result == 0 ? -ETIMEDOUT : result;
+ goto error_wait;
+ }
+ usb_kill_urb(i1480_usb->neep_urb);
+ return 0;
+
+error_wait:
+ usb_kill_urb(i1480_usb->neep_urb);
+error_submit:
+ i1480->evt_result = result;
+ return result;
+}
+
+
+/**
+ * Generic function for issuing commands to the i1480
+ *
+ * @i1480: i1480 instance
+ * @cmd_name: Name of the command (for error messages)
+ * @cmd: Pointer to command buffer
+ * @cmd_size: Size of the command buffer
+ * @reply: Buffer for the reply event
+ * @reply_size: Expected size back (including RCEB); the reply buffer
+ * is assumed to be as big as this.
+ * @returns: >= 0 size of the returned event data if ok,
+ * < 0 errno code on error.
+ *
+ * Arms the NE handle, issues the command to the device and checks the
+ * basics of the reply event.
+ */
+static
+int i1480_usb_cmd(struct i1480 *i1480, const char *cmd_name, size_t cmd_size)
+{
+ int result;
+ struct device *dev = i1480->dev;
+ struct i1480_usb *i1480_usb = container_of(i1480, struct i1480_usb, i1480);
+ struct usb_endpoint_descriptor *epd;
+ struct uwb_rccb *cmd = i1480->cmd_buf;
+ u8 iface_no;
+
+ /* Post a read on the notification & event endpoint */
+ iface_no = i1480_usb->usb_iface->cur_altsetting->desc.bInterfaceNumber;
+ epd = &i1480_usb->usb_iface->cur_altsetting->endpoint[0].desc;
+ usb_fill_int_urb(
+ i1480_usb->neep_urb, i1480_usb->usb_dev,
+ usb_rcvintpipe(i1480_usb->usb_dev, epd->bEndpointAddress),
+ i1480->evt_buf, i1480->buf_size,
+ i1480_usb_neep_cb, i1480, epd->bInterval);
+ result = usb_submit_urb(i1480_usb->neep_urb, GFP_KERNEL);
+ if (result < 0) {
+ dev_err(dev, "%s: cannot submit NEEP read: %d\n",
+ cmd_name, result);
+ goto error_submit_ep1;
+ }
+ /* Now post the command on EP0 */
+ result = usb_control_msg(
+ i1480_usb->usb_dev, usb_sndctrlpipe(i1480_usb->usb_dev, 0),
+ WA_EXEC_RC_CMD,
+ USB_DIR_OUT | USB_RECIP_INTERFACE | USB_TYPE_CLASS,
+ 0, iface_no,
+ cmd, cmd_size,
+ 100 /* FIXME: this is totally arbitrary */);
+ if (result < 0) {
+ dev_err(dev, "%s: control request failed: %d\n",
+ cmd_name, result);
+ goto error_submit_ep0;
+ }
+ return result;
+
+error_submit_ep0:
+ usb_kill_urb(i1480_usb->neep_urb);
+error_submit_ep1:
+ return result;
+}
+
+
+/*
+ * Probe a i1480 device for uploading firmware.
+ *
+ * We attach only to interface #0, which is the radio control interface.
+ */
+static
+int i1480_usb_probe(struct usb_interface *iface, const struct usb_device_id *id)
+{
+ struct i1480_usb *i1480_usb;
+ struct i1480 *i1480;
+ struct device *dev = &iface->dev;
+ int result;
+
+ result = -ENODEV;
+ if (iface->cur_altsetting->desc.bInterfaceNumber != 0) {
+ dev_dbg(dev, "not attaching to iface %d\n",
+ iface->cur_altsetting->desc.bInterfaceNumber);
+ goto error;
+ }
+ if (iface->num_altsetting > 1
+ && interface_to_usbdev(iface)->descriptor.idProduct == 0xbabe) {
+ /* Need altsetting #1 [HW QUIRK] or EP1 won't work */
+ result = usb_set_interface(interface_to_usbdev(iface), 0, 1);
+ if (result < 0)
+ dev_warn(dev,
+ "can't set altsetting 1 on iface 0: %d\n",
+ result);
+ }
+
+ result = -ENOMEM;
+ i1480_usb = kzalloc(sizeof(*i1480_usb), GFP_KERNEL);
+ if (i1480_usb == NULL) {
+ dev_err(dev, "Unable to allocate instance\n");
+ goto error;
+ }
+ i1480_usb_init(i1480_usb);
+
+ i1480 = &i1480_usb->i1480;
+ i1480->buf_size = 512;
+ i1480->cmd_buf = kmalloc(2 * i1480->buf_size, GFP_KERNEL);
+ if (i1480->cmd_buf == NULL) {
+ dev_err(dev, "Cannot allocate transfer buffers\n");
+ result = -ENOMEM;
+ goto error_buf_alloc;
+ }
+ i1480->evt_buf = i1480->cmd_buf + i1480->buf_size;
+
+ result = i1480_usb_create(i1480_usb, iface);
+ if (result < 0) {
+ dev_err(dev, "Cannot create instance: %d\n", result);
+ goto error_create;
+ }
+
+ /* setup the fops and upload the firmware */
+ i1480->pre_fw_name = "/*(DEBLOBBED)*/";
+ i1480->mac_fw_name = "/*(DEBLOBBED)*/";
+ i1480->mac_fw_name_deprecate = "/*(DEBLOBBED)*/";
+ i1480->phy_fw_name = "/*(DEBLOBBED)*/";
+ i1480->dev = &iface->dev;
+ i1480->write = i1480_usb_write;
+ i1480->read = i1480_usb_read;
+ i1480->rc_setup = NULL;
+ i1480->wait_init_done = i1480_usb_wait_init_done;
+ i1480->cmd = i1480_usb_cmd;
+
+ result = i1480_fw_upload(&i1480_usb->i1480); /* the real thing */
+ if (result >= 0) {
+ usb_reset_device(i1480_usb->usb_dev);
+ result = -ENODEV; /* we don't want to bind to the iface */
+ }
+ i1480_usb_destroy(i1480_usb);
+error_create:
+ kfree(i1480->cmd_buf);
+error_buf_alloc:
+ kfree(i1480_usb);
+error:
+ return result;
+}
+
+/*(DEBLOBBED)*/
+
+#define i1480_USB_DEV(v, p) \
+{ \
+ .match_flags = USB_DEVICE_ID_MATCH_DEVICE \
+ | USB_DEVICE_ID_MATCH_DEV_INFO \
+ | USB_DEVICE_ID_MATCH_INT_INFO, \
+ .idVendor = (v), \
+ .idProduct = (p), \
+ .bDeviceClass = 0xff, \
+ .bDeviceSubClass = 0xff, \
+ .bDeviceProtocol = 0xff, \
+ .bInterfaceClass = 0xff, \
+ .bInterfaceSubClass = 0xff, \
+ .bInterfaceProtocol = 0xff, \
+}
+
+
+/** USB device ID's that we handle */
+static const struct usb_device_id i1480_usb_id_table[] = {
+ i1480_USB_DEV(0x8086, 0xdf3b),
+ i1480_USB_DEV(0x15a9, 0x0005),
+ i1480_USB_DEV(0x07d1, 0x3802),
+ i1480_USB_DEV(0x050d, 0x305a),
+ i1480_USB_DEV(0x3495, 0x3007),
+ {},
+};
+MODULE_DEVICE_TABLE(usb, i1480_usb_id_table);
+
+
+static struct usb_driver i1480_dfu_driver = {
+ .name = "i1480-dfu-usb",
+ .id_table = i1480_usb_id_table,
+ .probe = i1480_usb_probe,
+ .disconnect = NULL,
+};
+
+module_usb_driver(i1480_dfu_driver);
+
+MODULE_AUTHOR("Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>");
+MODULE_DESCRIPTION("Intel Wireless UWB Link 1480 firmware uploader for USB");
+MODULE_LICENSE("GPL");
diff --git a/drivers/uwb/i1480/i1480-est.c b/drivers/uwb/i1480/i1480-est.c
new file mode 100644
index 000000000..d5de5e131
--- /dev/null
+++ b/drivers/uwb/i1480/i1480-est.c
@@ -0,0 +1,99 @@
+/*
+ * Intel Wireless UWB Link 1480
+ * Event Size tables for Wired Adaptors
+ *
+ * Copyright (C) 2005-2006 Intel Corporation
+ * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ *
+ *
+ * FIXME: docs
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/usb.h>
+#include <linux/uwb.h>
+#include "dfu/i1480-dfu.h"
+
+
+/** Event size table for wEvents 0x00XX */
+static struct uwb_est_entry i1480_est_fd00[] = {
+ /* Anybody expecting this response has to use
+ * neh->extra_size to specify the real size that will
+ * come back. */
+ [i1480_EVT_CONFIRM] = { .size = sizeof(struct i1480_evt_confirm) },
+ [i1480_CMD_SET_IP_MAS] = { .size = sizeof(struct i1480_evt_confirm) },
+#ifdef i1480_RCEB_EXTENDED
+ [0x09] = {
+ .size = sizeof(struct i1480_rceb),
+ .offset = 1 + offsetof(struct i1480_rceb, wParamLength),
+ },
+#endif
+};
+
+/** Event size table for wEvents 0x01XX */
+static struct uwb_est_entry i1480_est_fd01[] = {
+ [0xff & i1480_EVT_RM_INIT_DONE] = { .size = sizeof(struct i1480_rceb) },
+ [0xff & i1480_EVT_DEV_ADD] = { .size = sizeof(struct i1480_rceb) + 9 },
+ [0xff & i1480_EVT_DEV_RM] = { .size = sizeof(struct i1480_rceb) + 9 },
+ [0xff & i1480_EVT_DEV_ID_CHANGE] = {
+ .size = sizeof(struct i1480_rceb) + 2 },
+};
+
+static int __init i1480_est_init(void)
+{
+ int result = uwb_est_register(i1480_CET_VS1, 0x00, 0x8086, 0x0c3b,
+ i1480_est_fd00,
+ ARRAY_SIZE(i1480_est_fd00));
+ if (result < 0) {
+ printk(KERN_ERR "Can't register EST table fd00: %d\n", result);
+ return result;
+ }
+ result = uwb_est_register(i1480_CET_VS1, 0x01, 0x8086, 0x0c3b,
+ i1480_est_fd01, ARRAY_SIZE(i1480_est_fd01));
+ if (result < 0) {
+ printk(KERN_ERR "Can't register EST table fd01: %d\n", result);
+ return result;
+ }
+ return 0;
+}
+module_init(i1480_est_init);
+
+static void __exit i1480_est_exit(void)
+{
+ uwb_est_unregister(i1480_CET_VS1, 0x00, 0x8086, 0x0c3b,
+ i1480_est_fd00, ARRAY_SIZE(i1480_est_fd00));
+ uwb_est_unregister(i1480_CET_VS1, 0x01, 0x8086, 0x0c3b,
+ i1480_est_fd01, ARRAY_SIZE(i1480_est_fd01));
+}
+module_exit(i1480_est_exit);
+
+MODULE_AUTHOR("Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>");
+MODULE_DESCRIPTION("i1480's Vendor Specific Event Size Tables");
+MODULE_LICENSE("GPL");
+
+/**
+ * USB device ID's that we handle
+ *
+ * [so we are loaded when this kind device is connected]
+ */
+static struct usb_device_id __used i1480_est_id_table[] = {
+ { USB_DEVICE(0x8086, 0xdf3b), },
+ { USB_DEVICE(0x8086, 0x0c3b), },
+ { },
+};
+MODULE_DEVICE_TABLE(usb, i1480_est_id_table);
diff --git a/drivers/uwb/ie-rcv.c b/drivers/uwb/ie-rcv.c
new file mode 100644
index 000000000..5fac5744a
--- /dev/null
+++ b/drivers/uwb/ie-rcv.c
@@ -0,0 +1,53 @@
+/*
+ * Ultra Wide Band
+ * IE Received notification handling.
+ *
+ * Copyright (C) 2008 Cambridge Silicon Radio Ltd.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/errno.h>
+#include <linux/module.h>
+#include <linux/device.h>
+#include <linux/bitmap.h>
+#include "uwb-internal.h"
+
+/*
+ * Process an incoming IE Received notification.
+ */
+int uwbd_evt_handle_rc_ie_rcv(struct uwb_event *evt)
+{
+ int result = -EINVAL;
+ struct device *dev = &evt->rc->uwb_dev.dev;
+ struct uwb_rc_evt_ie_rcv *iercv;
+
+ /* Is there enough data to decode it? */
+ if (evt->notif.size < sizeof(*iercv)) {
+ dev_err(dev, "IE Received notification: Not enough data to "
+ "decode (%zu vs %zu bytes needed)\n",
+ evt->notif.size, sizeof(*iercv));
+ goto error;
+ }
+ iercv = container_of(evt->notif.rceb, struct uwb_rc_evt_ie_rcv, rceb);
+
+ dev_dbg(dev, "IE received, element ID=%d\n", iercv->IEData[0]);
+
+ if (iercv->IEData[0] == UWB_RELINQUISH_REQUEST_IE) {
+ dev_warn(dev, "unhandled Relinquish Request IE\n");
+ }
+
+ return 0;
+error:
+ return result;
+}
diff --git a/drivers/uwb/ie.c b/drivers/uwb/ie.c
new file mode 100644
index 000000000..902b0f2f9
--- /dev/null
+++ b/drivers/uwb/ie.c
@@ -0,0 +1,380 @@
+/*
+ * Ultra Wide Band
+ * Information Element Handling
+ *
+ * Copyright (C) 2005-2006 Intel Corporation
+ * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
+ * Reinette Chatre <reinette.chatre@intel.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ *
+ *
+ * FIXME: docs
+ */
+
+#include <linux/slab.h>
+#include <linux/export.h>
+#include "uwb-internal.h"
+
+/**
+ * uwb_ie_next - get the next IE in a buffer
+ * @ptr: start of the buffer containing the IE data
+ * @len: length of the buffer
+ *
+ * Both @ptr and @len are updated so subsequent calls to uwb_ie_next()
+ * will get the next IE.
+ *
+ * NULL is returned (and @ptr and @len will not be updated) if there
+ * are no more IEs in the buffer or the buffer is too short.
+ */
+struct uwb_ie_hdr *uwb_ie_next(void **ptr, size_t *len)
+{
+ struct uwb_ie_hdr *hdr;
+ size_t ie_len;
+
+ if (*len < sizeof(struct uwb_ie_hdr))
+ return NULL;
+
+ hdr = *ptr;
+ ie_len = sizeof(struct uwb_ie_hdr) + hdr->length;
+
+ if (*len < ie_len)
+ return NULL;
+
+ *ptr += ie_len;
+ *len -= ie_len;
+
+ return hdr;
+}
+EXPORT_SYMBOL_GPL(uwb_ie_next);
+
+/**
+ * uwb_ie_dump_hex - print IEs to a character buffer
+ * @ies: the IEs to print.
+ * @len: length of all the IEs.
+ * @buf: the destination buffer.
+ * @size: size of @buf.
+ *
+ * Returns the number of characters written.
+ */
+int uwb_ie_dump_hex(const struct uwb_ie_hdr *ies, size_t len,
+ char *buf, size_t size)
+{
+ void *ptr;
+ const struct uwb_ie_hdr *ie;
+ int r = 0;
+ u8 *d;
+
+ ptr = (void *)ies;
+ for (;;) {
+ ie = uwb_ie_next(&ptr, &len);
+ if (!ie)
+ break;
+
+ r += scnprintf(buf + r, size - r, "%02x %02x",
+ (unsigned)ie->element_id,
+ (unsigned)ie->length);
+ d = (uint8_t *)ie + sizeof(struct uwb_ie_hdr);
+ while (d != ptr && r < size)
+ r += scnprintf(buf + r, size - r, " %02x", (unsigned)*d++);
+ if (r < size)
+ buf[r++] = '\n';
+ };
+
+ return r;
+}
+
+/**
+ * Get the IEs that a radio controller is sending in its beacon
+ *
+ * @uwb_rc: UWB Radio Controller
+ * @returns: Size read from the system
+ *
+ * We don't need to lock the uwb_rc's mutex because we don't modify
+ * anything. Once done with the iedata buffer, call
+ * uwb_rc_ie_release(iedata). Don't call kfree on it.
+ */
+static
+ssize_t uwb_rc_get_ie(struct uwb_rc *uwb_rc, struct uwb_rc_evt_get_ie **pget_ie)
+{
+ ssize_t result;
+ struct device *dev = &uwb_rc->uwb_dev.dev;
+ struct uwb_rccb *cmd = NULL;
+ struct uwb_rceb *reply = NULL;
+ struct uwb_rc_evt_get_ie *get_ie;
+
+ cmd = kzalloc(sizeof(*cmd), GFP_KERNEL);
+ if (cmd == NULL)
+ return -ENOMEM;
+
+ cmd->bCommandType = UWB_RC_CET_GENERAL;
+ cmd->wCommand = cpu_to_le16(UWB_RC_CMD_GET_IE);
+ result = uwb_rc_vcmd(uwb_rc, "GET_IE", cmd, sizeof(*cmd),
+ UWB_RC_CET_GENERAL, UWB_RC_CMD_GET_IE,
+ &reply);
+ kfree(cmd);
+ if (result < 0)
+ return result;
+
+ get_ie = container_of(reply, struct uwb_rc_evt_get_ie, rceb);
+ if (result < sizeof(*get_ie)) {
+ dev_err(dev, "not enough data returned for decoding GET IE "
+ "(%zu bytes received vs %zu needed)\n",
+ result, sizeof(*get_ie));
+ return -EINVAL;
+ } else if (result < sizeof(*get_ie) + le16_to_cpu(get_ie->wIELength)) {
+ dev_err(dev, "not enough data returned for decoding GET IE "
+ "payload (%zu bytes received vs %zu needed)\n", result,
+ sizeof(*get_ie) + le16_to_cpu(get_ie->wIELength));
+ return -EINVAL;
+ }
+
+ *pget_ie = get_ie;
+ return result;
+}
+
+
+/**
+ * Replace all IEs currently being transmitted by a device
+ *
+ * @cmd: pointer to the SET-IE command with the IEs to set
+ * @size: size of @buf
+ */
+int uwb_rc_set_ie(struct uwb_rc *rc, struct uwb_rc_cmd_set_ie *cmd)
+{
+ int result;
+ struct device *dev = &rc->uwb_dev.dev;
+ struct uwb_rc_evt_set_ie reply;
+
+ reply.rceb.bEventType = UWB_RC_CET_GENERAL;
+ reply.rceb.wEvent = UWB_RC_CMD_SET_IE;
+ result = uwb_rc_cmd(rc, "SET-IE", &cmd->rccb,
+ sizeof(*cmd) + le16_to_cpu(cmd->wIELength),
+ &reply.rceb, sizeof(reply));
+ if (result < 0)
+ goto error_cmd;
+ else if (result != sizeof(reply)) {
+ dev_err(dev, "SET-IE: not enough data to decode reply "
+ "(%d bytes received vs %zu needed)\n",
+ result, sizeof(reply));
+ result = -EIO;
+ } else if (reply.bResultCode != UWB_RC_RES_SUCCESS) {
+ dev_err(dev, "SET-IE: command execution failed: %s (%d)\n",
+ uwb_rc_strerror(reply.bResultCode), reply.bResultCode);
+ result = -EIO;
+ } else
+ result = 0;
+error_cmd:
+ return result;
+}
+
+/* Cleanup the whole IE management subsystem */
+void uwb_rc_ie_init(struct uwb_rc *uwb_rc)
+{
+ mutex_init(&uwb_rc->ies_mutex);
+}
+
+
+/**
+ * uwb_rc_ie_setup - setup a radio controller's IE manager
+ * @uwb_rc: the radio controller.
+ *
+ * The current set of IEs are obtained from the hardware with a GET-IE
+ * command (since the radio controller is not yet beaconing this will
+ * be just the hardware's MAC and PHY Capability IEs).
+ *
+ * Returns 0 on success; -ve on an error.
+ */
+int uwb_rc_ie_setup(struct uwb_rc *uwb_rc)
+{
+ struct uwb_rc_evt_get_ie *ie_info = NULL;
+ int capacity;
+
+ capacity = uwb_rc_get_ie(uwb_rc, &ie_info);
+ if (capacity < 0)
+ return capacity;
+
+ mutex_lock(&uwb_rc->ies_mutex);
+
+ uwb_rc->ies = (struct uwb_rc_cmd_set_ie *)ie_info;
+ uwb_rc->ies->rccb.bCommandType = UWB_RC_CET_GENERAL;
+ uwb_rc->ies->rccb.wCommand = cpu_to_le16(UWB_RC_CMD_SET_IE);
+ uwb_rc->ies_capacity = capacity;
+
+ mutex_unlock(&uwb_rc->ies_mutex);
+
+ return 0;
+}
+
+
+/* Cleanup the whole IE management subsystem */
+void uwb_rc_ie_release(struct uwb_rc *uwb_rc)
+{
+ kfree(uwb_rc->ies);
+ uwb_rc->ies = NULL;
+ uwb_rc->ies_capacity = 0;
+}
+
+
+static int uwb_rc_ie_add_one(struct uwb_rc *rc, const struct uwb_ie_hdr *new_ie)
+{
+ struct uwb_rc_cmd_set_ie *new_ies;
+ void *ptr, *prev_ie;
+ struct uwb_ie_hdr *ie;
+ size_t length, new_ie_len, new_capacity, size, prev_size;
+
+ length = le16_to_cpu(rc->ies->wIELength);
+ new_ie_len = sizeof(struct uwb_ie_hdr) + new_ie->length;
+ new_capacity = sizeof(struct uwb_rc_cmd_set_ie) + length + new_ie_len;
+
+ if (new_capacity > rc->ies_capacity) {
+ new_ies = krealloc(rc->ies, new_capacity, GFP_KERNEL);
+ if (!new_ies)
+ return -ENOMEM;
+ rc->ies = new_ies;
+ }
+
+ ptr = rc->ies->IEData;
+ size = length;
+ for (;;) {
+ prev_ie = ptr;
+ prev_size = size;
+ ie = uwb_ie_next(&ptr, &size);
+ if (!ie || ie->element_id > new_ie->element_id)
+ break;
+ }
+
+ memmove(prev_ie + new_ie_len, prev_ie, prev_size);
+ memcpy(prev_ie, new_ie, new_ie_len);
+ rc->ies->wIELength = cpu_to_le16(length + new_ie_len);
+
+ return 0;
+}
+
+/**
+ * uwb_rc_ie_add - add new IEs to the radio controller's beacon
+ * @uwb_rc: the radio controller.
+ * @ies: the buffer containing the new IE or IEs to be added to
+ * the device's beacon.
+ * @size: length of all the IEs.
+ *
+ * According to WHCI 0.95 [4.13.6] the driver will only receive the RCEB
+ * after the device sent the first beacon that includes the IEs specified
+ * in the SET IE command. We thus cannot send this command if the device is
+ * not beaconing. Instead, a SET IE command will be sent later right after
+ * we start beaconing.
+ *
+ * Setting an IE on the device will overwrite all current IEs in device. So
+ * we take the current IEs being transmitted by the device, insert the
+ * new one, and call SET IE with all the IEs needed.
+ *
+ * Returns 0 on success; or -ENOMEM.
+ */
+int uwb_rc_ie_add(struct uwb_rc *uwb_rc,
+ const struct uwb_ie_hdr *ies, size_t size)
+{
+ int result = 0;
+ void *ptr;
+ const struct uwb_ie_hdr *ie;
+
+ mutex_lock(&uwb_rc->ies_mutex);
+
+ ptr = (void *)ies;
+ for (;;) {
+ ie = uwb_ie_next(&ptr, &size);
+ if (!ie)
+ break;
+
+ result = uwb_rc_ie_add_one(uwb_rc, ie);
+ if (result < 0)
+ break;
+ }
+ if (result >= 0) {
+ if (size == 0) {
+ if (uwb_rc->beaconing != -1)
+ result = uwb_rc_set_ie(uwb_rc, uwb_rc->ies);
+ } else
+ result = -EINVAL;
+ }
+
+ mutex_unlock(&uwb_rc->ies_mutex);
+
+ return result;
+}
+EXPORT_SYMBOL_GPL(uwb_rc_ie_add);
+
+
+/*
+ * Remove an IE from internal cache
+ *
+ * We are dealing with our internal IE cache so no need to verify that the
+ * IEs are valid (it has been done already).
+ *
+ * Should be called with ies_mutex held
+ *
+ * We do not break out once an IE is found in the cache. It is currently
+ * possible to have more than one IE with the same ID included in the
+ * beacon. We don't reallocate, we just mark the size smaller.
+ */
+static
+void uwb_rc_ie_cache_rm(struct uwb_rc *uwb_rc, enum uwb_ie to_remove)
+{
+ struct uwb_ie_hdr *ie;
+ size_t len = le16_to_cpu(uwb_rc->ies->wIELength);
+ void *ptr;
+ size_t size;
+
+ ptr = uwb_rc->ies->IEData;
+ size = len;
+ for (;;) {
+ ie = uwb_ie_next(&ptr, &size);
+ if (!ie)
+ break;
+ if (ie->element_id == to_remove) {
+ len -= sizeof(struct uwb_ie_hdr) + ie->length;
+ memmove(ie, ptr, size);
+ ptr = ie;
+ }
+ }
+ uwb_rc->ies->wIELength = cpu_to_le16(len);
+}
+
+
+/**
+ * uwb_rc_ie_rm - remove an IE from the radio controller's beacon
+ * @uwb_rc: the radio controller.
+ * @element_id: the element ID of the IE to remove.
+ *
+ * Only IEs previously added with uwb_rc_ie_add() may be removed.
+ *
+ * Returns 0 on success; or -ve the SET-IE command to the radio
+ * controller failed.
+ */
+int uwb_rc_ie_rm(struct uwb_rc *uwb_rc, enum uwb_ie element_id)
+{
+ int result = 0;
+
+ mutex_lock(&uwb_rc->ies_mutex);
+
+ uwb_rc_ie_cache_rm(uwb_rc, element_id);
+
+ if (uwb_rc->beaconing != -1)
+ result = uwb_rc_set_ie(uwb_rc, uwb_rc->ies);
+
+ mutex_unlock(&uwb_rc->ies_mutex);
+
+ return result;
+}
+EXPORT_SYMBOL_GPL(uwb_rc_ie_rm);
diff --git a/drivers/uwb/lc-dev.c b/drivers/uwb/lc-dev.c
new file mode 100644
index 000000000..72033589d
--- /dev/null
+++ b/drivers/uwb/lc-dev.c
@@ -0,0 +1,471 @@
+/*
+ * Ultra Wide Band
+ * Life cycle of devices
+ *
+ * Copyright (C) 2005-2006 Intel Corporation
+ * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ *
+ *
+ * FIXME: docs
+ */
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/device.h>
+#include <linux/export.h>
+#include <linux/err.h>
+#include <linux/kdev_t.h>
+#include <linux/random.h>
+#include <linux/stat.h>
+#include "uwb-internal.h"
+
+/* We initialize addresses to 0xff (invalid, as it is bcast) */
+static inline void uwb_dev_addr_init(struct uwb_dev_addr *addr)
+{
+ memset(&addr->data, 0xff, sizeof(addr->data));
+}
+
+static inline void uwb_mac_addr_init(struct uwb_mac_addr *addr)
+{
+ memset(&addr->data, 0xff, sizeof(addr->data));
+}
+
+/*
+ * Add callback @new to be called when an event occurs in @rc.
+ */
+int uwb_notifs_register(struct uwb_rc *rc, struct uwb_notifs_handler *new)
+{
+ if (mutex_lock_interruptible(&rc->notifs_chain.mutex))
+ return -ERESTARTSYS;
+ list_add(&new->list_node, &rc->notifs_chain.list);
+ mutex_unlock(&rc->notifs_chain.mutex);
+ return 0;
+}
+EXPORT_SYMBOL_GPL(uwb_notifs_register);
+
+/*
+ * Remove event handler (callback)
+ */
+int uwb_notifs_deregister(struct uwb_rc *rc, struct uwb_notifs_handler *entry)
+{
+ if (mutex_lock_interruptible(&rc->notifs_chain.mutex))
+ return -ERESTARTSYS;
+ list_del(&entry->list_node);
+ mutex_unlock(&rc->notifs_chain.mutex);
+ return 0;
+}
+EXPORT_SYMBOL_GPL(uwb_notifs_deregister);
+
+/*
+ * Notify all event handlers of a given event on @rc
+ *
+ * We are called with a valid reference to the device, or NULL if the
+ * event is not for a particular event (e.g., a BG join event).
+ */
+void uwb_notify(struct uwb_rc *rc, struct uwb_dev *uwb_dev, enum uwb_notifs event)
+{
+ struct uwb_notifs_handler *handler;
+ if (mutex_lock_interruptible(&rc->notifs_chain.mutex))
+ return;
+ if (!list_empty(&rc->notifs_chain.list)) {
+ list_for_each_entry(handler, &rc->notifs_chain.list, list_node) {
+ handler->cb(handler->data, uwb_dev, event);
+ }
+ }
+ mutex_unlock(&rc->notifs_chain.mutex);
+}
+
+/*
+ * Release the backing device of a uwb_dev that has been dynamically allocated.
+ */
+static void uwb_dev_sys_release(struct device *dev)
+{
+ struct uwb_dev *uwb_dev = to_uwb_dev(dev);
+
+ uwb_bce_put(uwb_dev->bce);
+ memset(uwb_dev, 0x69, sizeof(*uwb_dev));
+ kfree(uwb_dev);
+}
+
+/*
+ * Initialize a UWB device instance
+ *
+ * Alloc, zero and call this function.
+ */
+void uwb_dev_init(struct uwb_dev *uwb_dev)
+{
+ mutex_init(&uwb_dev->mutex);
+ device_initialize(&uwb_dev->dev);
+ uwb_dev->dev.release = uwb_dev_sys_release;
+ uwb_dev_addr_init(&uwb_dev->dev_addr);
+ uwb_mac_addr_init(&uwb_dev->mac_addr);
+ bitmap_fill(uwb_dev->streams, UWB_NUM_GLOBAL_STREAMS);
+}
+
+static ssize_t uwb_dev_EUI_48_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct uwb_dev *uwb_dev = to_uwb_dev(dev);
+ char addr[UWB_ADDR_STRSIZE];
+
+ uwb_mac_addr_print(addr, sizeof(addr), &uwb_dev->mac_addr);
+ return sprintf(buf, "%s\n", addr);
+}
+static DEVICE_ATTR(EUI_48, S_IRUGO, uwb_dev_EUI_48_show, NULL);
+
+static ssize_t uwb_dev_DevAddr_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct uwb_dev *uwb_dev = to_uwb_dev(dev);
+ char addr[UWB_ADDR_STRSIZE];
+
+ uwb_dev_addr_print(addr, sizeof(addr), &uwb_dev->dev_addr);
+ return sprintf(buf, "%s\n", addr);
+}
+static DEVICE_ATTR(DevAddr, S_IRUGO, uwb_dev_DevAddr_show, NULL);
+
+/*
+ * Show the BPST of this device.
+ *
+ * Calculated from the receive time of the device's beacon and it's
+ * slot number.
+ */
+static ssize_t uwb_dev_BPST_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct uwb_dev *uwb_dev = to_uwb_dev(dev);
+ struct uwb_beca_e *bce;
+ struct uwb_beacon_frame *bf;
+ u16 bpst;
+
+ bce = uwb_dev->bce;
+ mutex_lock(&bce->mutex);
+ bf = (struct uwb_beacon_frame *)bce->be->BeaconInfo;
+ bpst = bce->be->wBPSTOffset
+ - (u16)(bf->Beacon_Slot_Number * UWB_BEACON_SLOT_LENGTH_US);
+ mutex_unlock(&bce->mutex);
+
+ return sprintf(buf, "%d\n", bpst);
+}
+static DEVICE_ATTR(BPST, S_IRUGO, uwb_dev_BPST_show, NULL);
+
+/*
+ * Show the IEs a device is beaconing
+ *
+ * We need to access the beacon cache, so we just lock it really
+ * quick, print the IEs and unlock.
+ *
+ * We have a reference on the cache entry, so that should be
+ * quite safe.
+ */
+static ssize_t uwb_dev_IEs_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct uwb_dev *uwb_dev = to_uwb_dev(dev);
+
+ return uwb_bce_print_IEs(uwb_dev, uwb_dev->bce, buf, PAGE_SIZE);
+}
+static DEVICE_ATTR(IEs, S_IRUGO | S_IWUSR, uwb_dev_IEs_show, NULL);
+
+static ssize_t uwb_dev_LQE_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct uwb_dev *uwb_dev = to_uwb_dev(dev);
+ struct uwb_beca_e *bce = uwb_dev->bce;
+ size_t result;
+
+ mutex_lock(&bce->mutex);
+ result = stats_show(&uwb_dev->bce->lqe_stats, buf);
+ mutex_unlock(&bce->mutex);
+ return result;
+}
+
+static ssize_t uwb_dev_LQE_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t size)
+{
+ struct uwb_dev *uwb_dev = to_uwb_dev(dev);
+ struct uwb_beca_e *bce = uwb_dev->bce;
+ ssize_t result;
+
+ mutex_lock(&bce->mutex);
+ result = stats_store(&uwb_dev->bce->lqe_stats, buf, size);
+ mutex_unlock(&bce->mutex);
+ return result;
+}
+static DEVICE_ATTR(LQE, S_IRUGO | S_IWUSR, uwb_dev_LQE_show, uwb_dev_LQE_store);
+
+static ssize_t uwb_dev_RSSI_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct uwb_dev *uwb_dev = to_uwb_dev(dev);
+ struct uwb_beca_e *bce = uwb_dev->bce;
+ size_t result;
+
+ mutex_lock(&bce->mutex);
+ result = stats_show(&uwb_dev->bce->rssi_stats, buf);
+ mutex_unlock(&bce->mutex);
+ return result;
+}
+
+static ssize_t uwb_dev_RSSI_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t size)
+{
+ struct uwb_dev *uwb_dev = to_uwb_dev(dev);
+ struct uwb_beca_e *bce = uwb_dev->bce;
+ ssize_t result;
+
+ mutex_lock(&bce->mutex);
+ result = stats_store(&uwb_dev->bce->rssi_stats, buf, size);
+ mutex_unlock(&bce->mutex);
+ return result;
+}
+static DEVICE_ATTR(RSSI, S_IRUGO | S_IWUSR, uwb_dev_RSSI_show, uwb_dev_RSSI_store);
+
+
+static struct attribute *uwb_dev_attrs[] = {
+ &dev_attr_EUI_48.attr,
+ &dev_attr_DevAddr.attr,
+ &dev_attr_BPST.attr,
+ &dev_attr_IEs.attr,
+ &dev_attr_LQE.attr,
+ &dev_attr_RSSI.attr,
+ NULL,
+};
+ATTRIBUTE_GROUPS(uwb_dev);
+
+/* UWB bus type. */
+struct bus_type uwb_bus_type = {
+ .name = "uwb",
+ .dev_groups = uwb_dev_groups,
+};
+
+/**
+ * Device SYSFS registration
+ */
+static int __uwb_dev_sys_add(struct uwb_dev *uwb_dev, struct device *parent_dev)
+{
+ struct device *dev;
+
+ dev = &uwb_dev->dev;
+ dev->parent = parent_dev;
+ dev_set_drvdata(dev, uwb_dev);
+
+ return device_add(dev);
+}
+
+
+static void __uwb_dev_sys_rm(struct uwb_dev *uwb_dev)
+{
+ dev_set_drvdata(&uwb_dev->dev, NULL);
+ device_del(&uwb_dev->dev);
+}
+
+
+/**
+ * Register and initialize a new UWB device
+ *
+ * Did you call uwb_dev_init() on it?
+ *
+ * @parent_rc: is the parent radio controller who has the link to the
+ * device. When registering the UWB device that is a UWB
+ * Radio Controller, we point back to it.
+ *
+ * If registering the device that is part of a radio, caller has set
+ * rc->uwb_dev->dev. Otherwise it is to be left NULL--a new one will
+ * be allocated.
+ */
+int uwb_dev_add(struct uwb_dev *uwb_dev, struct device *parent_dev,
+ struct uwb_rc *parent_rc)
+{
+ int result;
+ struct device *dev;
+
+ BUG_ON(uwb_dev == NULL);
+ BUG_ON(parent_dev == NULL);
+ BUG_ON(parent_rc == NULL);
+
+ mutex_lock(&uwb_dev->mutex);
+ dev = &uwb_dev->dev;
+ uwb_dev->rc = parent_rc;
+ result = __uwb_dev_sys_add(uwb_dev, parent_dev);
+ if (result < 0)
+ printk(KERN_ERR "UWB: unable to register dev %s with sysfs: %d\n",
+ dev_name(dev), result);
+ mutex_unlock(&uwb_dev->mutex);
+ return result;
+}
+
+
+void uwb_dev_rm(struct uwb_dev *uwb_dev)
+{
+ mutex_lock(&uwb_dev->mutex);
+ __uwb_dev_sys_rm(uwb_dev);
+ mutex_unlock(&uwb_dev->mutex);
+}
+
+
+static
+int __uwb_dev_try_get(struct device *dev, void *__target_uwb_dev)
+{
+ struct uwb_dev *target_uwb_dev = __target_uwb_dev;
+ struct uwb_dev *uwb_dev = to_uwb_dev(dev);
+ if (uwb_dev == target_uwb_dev) {
+ uwb_dev_get(uwb_dev);
+ return 1;
+ } else
+ return 0;
+}
+
+
+/**
+ * Given a UWB device descriptor, validate and refcount it
+ *
+ * @returns NULL if the device does not exist or is quiescing; the ptr to
+ * it otherwise.
+ */
+struct uwb_dev *uwb_dev_try_get(struct uwb_rc *rc, struct uwb_dev *uwb_dev)
+{
+ if (uwb_dev_for_each(rc, __uwb_dev_try_get, uwb_dev))
+ return uwb_dev;
+ else
+ return NULL;
+}
+EXPORT_SYMBOL_GPL(uwb_dev_try_get);
+
+
+/**
+ * Remove a device from the system [grunt for other functions]
+ */
+int __uwb_dev_offair(struct uwb_dev *uwb_dev, struct uwb_rc *rc)
+{
+ struct device *dev = &uwb_dev->dev;
+ char macbuf[UWB_ADDR_STRSIZE], devbuf[UWB_ADDR_STRSIZE];
+
+ uwb_mac_addr_print(macbuf, sizeof(macbuf), &uwb_dev->mac_addr);
+ uwb_dev_addr_print(devbuf, sizeof(devbuf), &uwb_dev->dev_addr);
+ dev_info(dev, "uwb device (mac %s dev %s) disconnected from %s %s\n",
+ macbuf, devbuf,
+ uwb_dev->dev.bus->name,
+ rc ? dev_name(&(rc->uwb_dev.dev)) : "");
+ uwb_dev_rm(uwb_dev);
+ list_del(&uwb_dev->bce->node);
+ uwb_bce_put(uwb_dev->bce);
+ uwb_dev_put(uwb_dev); /* for the creation in _onair() */
+
+ return 0;
+}
+
+
+/**
+ * A device went off the air, clean up after it!
+ *
+ * This is called by the UWB Daemon (through the beacon purge function
+ * uwb_bcn_cache_purge) when it is detected that a device has been in
+ * radio silence for a while.
+ *
+ * If this device is actually a local radio controller we don't need
+ * to go through the offair process, as it is not registered as that.
+ *
+ * NOTE: uwb_bcn_cache.mutex is held!
+ */
+void uwbd_dev_offair(struct uwb_beca_e *bce)
+{
+ struct uwb_dev *uwb_dev;
+
+ uwb_dev = bce->uwb_dev;
+ if (uwb_dev) {
+ uwb_notify(uwb_dev->rc, uwb_dev, UWB_NOTIF_OFFAIR);
+ __uwb_dev_offair(uwb_dev, uwb_dev->rc);
+ }
+}
+
+
+/**
+ * A device went on the air, start it up!
+ *
+ * This is called by the UWB Daemon when it is detected that a device
+ * has popped up in the radio range of the radio controller.
+ *
+ * It will just create the freaking device, register the beacon and
+ * stuff and yatla, done.
+ *
+ *
+ * NOTE: uwb_beca.mutex is held, bce->mutex is held
+ */
+void uwbd_dev_onair(struct uwb_rc *rc, struct uwb_beca_e *bce)
+{
+ int result;
+ struct device *dev = &rc->uwb_dev.dev;
+ struct uwb_dev *uwb_dev;
+ char macbuf[UWB_ADDR_STRSIZE], devbuf[UWB_ADDR_STRSIZE];
+
+ uwb_mac_addr_print(macbuf, sizeof(macbuf), bce->mac_addr);
+ uwb_dev_addr_print(devbuf, sizeof(devbuf), &bce->dev_addr);
+ uwb_dev = kzalloc(sizeof(struct uwb_dev), GFP_KERNEL);
+ if (uwb_dev == NULL) {
+ dev_err(dev, "new device %s: Cannot allocate memory\n",
+ macbuf);
+ return;
+ }
+ uwb_dev_init(uwb_dev); /* This sets refcnt to one, we own it */
+ uwb_dev->dev.bus = &uwb_bus_type;
+ uwb_dev->mac_addr = *bce->mac_addr;
+ uwb_dev->dev_addr = bce->dev_addr;
+ dev_set_name(&uwb_dev->dev, "%s", macbuf);
+
+ /* plug the beacon cache */
+ bce->uwb_dev = uwb_dev;
+ uwb_dev->bce = bce;
+ uwb_bce_get(bce); /* released in uwb_dev_sys_release() */
+
+ result = uwb_dev_add(uwb_dev, &rc->uwb_dev.dev, rc);
+ if (result < 0) {
+ dev_err(dev, "new device %s: cannot instantiate device\n",
+ macbuf);
+ goto error_dev_add;
+ }
+
+ dev_info(dev, "uwb device (mac %s dev %s) connected to %s %s\n",
+ macbuf, devbuf, uwb_dev->dev.bus->name,
+ dev_name(&(rc->uwb_dev.dev)));
+ uwb_notify(rc, uwb_dev, UWB_NOTIF_ONAIR);
+ return;
+
+error_dev_add:
+ bce->uwb_dev = NULL;
+ uwb_bce_put(bce);
+ kfree(uwb_dev);
+ return;
+}
+
+/**
+ * Iterate over the list of UWB devices, calling a @function on each
+ *
+ * See docs for bus_for_each()....
+ *
+ * @rc: radio controller for the devices.
+ * @function: function to call.
+ * @priv: data to pass to @function.
+ * @returns: 0 if no invocation of function() returned a value
+ * different to zero. That value otherwise.
+ */
+int uwb_dev_for_each(struct uwb_rc *rc, uwb_dev_for_each_f function, void *priv)
+{
+ return device_for_each_child(&rc->uwb_dev.dev, priv, function);
+}
+EXPORT_SYMBOL_GPL(uwb_dev_for_each);
diff --git a/drivers/uwb/lc-rc.c b/drivers/uwb/lc-rc.c
new file mode 100644
index 000000000..d059ad4d0
--- /dev/null
+++ b/drivers/uwb/lc-rc.c
@@ -0,0 +1,573 @@
+/*
+ * Ultra Wide Band
+ * Life cycle of radio controllers
+ *
+ * Copyright (C) 2005-2006 Intel Corporation
+ * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ *
+ *
+ * FIXME: docs
+ *
+ * A UWB radio controller is also a UWB device, so it embeds one...
+ *
+ * List of RCs comes from the 'struct class uwb_rc_class'.
+ */
+
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/device.h>
+#include <linux/err.h>
+#include <linux/random.h>
+#include <linux/kdev_t.h>
+#include <linux/etherdevice.h>
+#include <linux/usb.h>
+#include <linux/slab.h>
+#include <linux/export.h>
+
+#include "uwb-internal.h"
+
+static int uwb_rc_index_match(struct device *dev, const void *data)
+{
+ const int *index = data;
+ struct uwb_rc *rc = dev_get_drvdata(dev);
+
+ if (rc->index == *index)
+ return 1;
+ return 0;
+}
+
+static struct uwb_rc *uwb_rc_find_by_index(int index)
+{
+ struct device *dev;
+ struct uwb_rc *rc = NULL;
+
+ dev = class_find_device(&uwb_rc_class, NULL, &index, uwb_rc_index_match);
+ if (dev)
+ rc = dev_get_drvdata(dev);
+ return rc;
+}
+
+static int uwb_rc_new_index(void)
+{
+ int index = 0;
+
+ for (;;) {
+ if (!uwb_rc_find_by_index(index))
+ return index;
+ if (++index < 0)
+ index = 0;
+ }
+}
+
+/**
+ * Release the backing device of a uwb_rc that has been dynamically allocated.
+ */
+static void uwb_rc_sys_release(struct device *dev)
+{
+ struct uwb_dev *uwb_dev = container_of(dev, struct uwb_dev, dev);
+ struct uwb_rc *rc = container_of(uwb_dev, struct uwb_rc, uwb_dev);
+
+ uwb_rc_ie_release(rc);
+ kfree(rc);
+}
+
+
+void uwb_rc_init(struct uwb_rc *rc)
+{
+ struct uwb_dev *uwb_dev = &rc->uwb_dev;
+
+ uwb_dev_init(uwb_dev);
+ rc->uwb_dev.dev.class = &uwb_rc_class;
+ rc->uwb_dev.dev.release = uwb_rc_sys_release;
+ uwb_rc_neh_create(rc);
+ rc->beaconing = -1;
+ rc->scan_type = UWB_SCAN_DISABLED;
+ INIT_LIST_HEAD(&rc->notifs_chain.list);
+ mutex_init(&rc->notifs_chain.mutex);
+ INIT_LIST_HEAD(&rc->uwb_beca.list);
+ mutex_init(&rc->uwb_beca.mutex);
+ uwb_drp_avail_init(rc);
+ uwb_rc_ie_init(rc);
+ uwb_rsv_init(rc);
+ uwb_rc_pal_init(rc);
+}
+EXPORT_SYMBOL_GPL(uwb_rc_init);
+
+
+struct uwb_rc *uwb_rc_alloc(void)
+{
+ struct uwb_rc *rc;
+ rc = kzalloc(sizeof(*rc), GFP_KERNEL);
+ if (rc == NULL)
+ return NULL;
+ uwb_rc_init(rc);
+ return rc;
+}
+EXPORT_SYMBOL_GPL(uwb_rc_alloc);
+
+/*
+ * Show the ASIE that is broadcast in the UWB beacon by this uwb_rc device.
+ */
+static ssize_t ASIE_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct uwb_dev *uwb_dev = to_uwb_dev(dev);
+ struct uwb_rc *rc = uwb_dev->rc;
+ struct uwb_ie_hdr *ie;
+ void *ptr;
+ size_t len;
+ int result = 0;
+
+ /* init empty buffer. */
+ result = scnprintf(buf, PAGE_SIZE, "\n");
+ mutex_lock(&rc->ies_mutex);
+ /* walk IEData looking for an ASIE. */
+ ptr = rc->ies->IEData;
+ len = le16_to_cpu(rc->ies->wIELength);
+ for (;;) {
+ ie = uwb_ie_next(&ptr, &len);
+ if (!ie)
+ break;
+ if (ie->element_id == UWB_APP_SPEC_IE) {
+ result = uwb_ie_dump_hex(ie,
+ ie->length + sizeof(struct uwb_ie_hdr),
+ buf, PAGE_SIZE);
+ break;
+ }
+ }
+ mutex_unlock(&rc->ies_mutex);
+
+ return result;
+}
+
+/*
+ * Update the ASIE that is broadcast in the UWB beacon by this uwb_rc device.
+ */
+static ssize_t ASIE_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t size)
+{
+ struct uwb_dev *uwb_dev = to_uwb_dev(dev);
+ struct uwb_rc *rc = uwb_dev->rc;
+ char ie_buf[255];
+ int result, ie_len = 0;
+ const char *cur_ptr = buf;
+ struct uwb_ie_hdr *ie;
+
+ /* empty string means clear the ASIE. */
+ if (strlen(buf) <= 1) {
+ uwb_rc_ie_rm(rc, UWB_APP_SPEC_IE);
+ return size;
+ }
+
+ /* if non-empty string, convert string of hex chars to binary. */
+ while (ie_len < sizeof(ie_buf)) {
+ int char_count;
+
+ if (sscanf(cur_ptr, " %02hhX %n",
+ &(ie_buf[ie_len]), &char_count) > 0) {
+ ++ie_len;
+ /* skip chars read from cur_ptr. */
+ cur_ptr += char_count;
+ } else {
+ break;
+ }
+ }
+
+ /* validate IE length and type. */
+ if (ie_len < sizeof(struct uwb_ie_hdr)) {
+ dev_err(dev, "%s: Invalid ASIE size %d.\n", __func__, ie_len);
+ return -EINVAL;
+ }
+
+ ie = (struct uwb_ie_hdr *)ie_buf;
+ if (ie->element_id != UWB_APP_SPEC_IE) {
+ dev_err(dev, "%s: Invalid IE element type size = 0x%02X.\n",
+ __func__, ie->element_id);
+ return -EINVAL;
+ }
+
+ /* bounds check length field from user. */
+ if (ie->length > (ie_len - sizeof(struct uwb_ie_hdr)))
+ ie->length = ie_len - sizeof(struct uwb_ie_hdr);
+
+ /*
+ * Valid ASIE received. Remove current ASIE then add the new one using
+ * uwb_rc_ie_add.
+ */
+ uwb_rc_ie_rm(rc, UWB_APP_SPEC_IE);
+
+ result = uwb_rc_ie_add(rc, ie, ie->length + sizeof(struct uwb_ie_hdr));
+
+ return result >= 0 ? size : result;
+}
+static DEVICE_ATTR_RW(ASIE);
+
+static struct attribute *rc_attrs[] = {
+ &dev_attr_mac_address.attr,
+ &dev_attr_scan.attr,
+ &dev_attr_beacon.attr,
+ &dev_attr_ASIE.attr,
+ NULL,
+};
+
+static struct attribute_group rc_attr_group = {
+ .attrs = rc_attrs,
+};
+
+/*
+ * Registration of sysfs specific stuff
+ */
+static int uwb_rc_sys_add(struct uwb_rc *rc)
+{
+ return sysfs_create_group(&rc->uwb_dev.dev.kobj, &rc_attr_group);
+}
+
+
+static void __uwb_rc_sys_rm(struct uwb_rc *rc)
+{
+ sysfs_remove_group(&rc->uwb_dev.dev.kobj, &rc_attr_group);
+}
+
+/**
+ * uwb_rc_mac_addr_setup - get an RC's EUI-48 address or set it
+ * @rc: the radio controller.
+ *
+ * If the EUI-48 address is 00:00:00:00:00:00 or FF:FF:FF:FF:FF:FF
+ * then a random locally administered EUI-48 is generated and set on
+ * the device. The probability of address collisions is sufficiently
+ * unlikely (1/2^40 = 9.1e-13) that they're not checked for.
+ */
+static
+int uwb_rc_mac_addr_setup(struct uwb_rc *rc)
+{
+ int result;
+ struct device *dev = &rc->uwb_dev.dev;
+ struct uwb_dev *uwb_dev = &rc->uwb_dev;
+ char devname[UWB_ADDR_STRSIZE];
+ struct uwb_mac_addr addr;
+
+ result = uwb_rc_mac_addr_get(rc, &addr);
+ if (result < 0) {
+ dev_err(dev, "cannot retrieve UWB EUI-48 address: %d\n", result);
+ return result;
+ }
+
+ if (uwb_mac_addr_unset(&addr) || uwb_mac_addr_bcast(&addr)) {
+ addr.data[0] = 0x02; /* locally administered and unicast */
+ get_random_bytes(&addr.data[1], sizeof(addr.data)-1);
+
+ result = uwb_rc_mac_addr_set(rc, &addr);
+ if (result < 0) {
+ uwb_mac_addr_print(devname, sizeof(devname), &addr);
+ dev_err(dev, "cannot set EUI-48 address %s: %d\n",
+ devname, result);
+ return result;
+ }
+ }
+ uwb_dev->mac_addr = addr;
+ return 0;
+}
+
+
+
+static int uwb_rc_setup(struct uwb_rc *rc)
+{
+ int result;
+ struct device *dev = &rc->uwb_dev.dev;
+
+ result = uwb_radio_setup(rc);
+ if (result < 0) {
+ dev_err(dev, "cannot setup UWB radio: %d\n", result);
+ goto error;
+ }
+ result = uwb_rc_mac_addr_setup(rc);
+ if (result < 0) {
+ dev_err(dev, "cannot setup UWB MAC address: %d\n", result);
+ goto error;
+ }
+ result = uwb_rc_dev_addr_assign(rc);
+ if (result < 0) {
+ dev_err(dev, "cannot assign UWB DevAddr: %d\n", result);
+ goto error;
+ }
+ result = uwb_rc_ie_setup(rc);
+ if (result < 0) {
+ dev_err(dev, "cannot setup IE subsystem: %d\n", result);
+ goto error_ie_setup;
+ }
+ result = uwb_rsv_setup(rc);
+ if (result < 0) {
+ dev_err(dev, "cannot setup reservation subsystem: %d\n", result);
+ goto error_rsv_setup;
+ }
+ uwb_dbg_add_rc(rc);
+ return 0;
+
+error_rsv_setup:
+ uwb_rc_ie_release(rc);
+error_ie_setup:
+error:
+ return result;
+}
+
+
+/**
+ * Register a new UWB radio controller
+ *
+ * Did you call uwb_rc_init() on your rc?
+ *
+ * We assume that this is being called with a > 0 refcount on
+ * it [through ops->{get|put}_device(). We'll take our own, though.
+ *
+ * @parent_dev is our real device, the one that provides the actual UWB device
+ */
+int uwb_rc_add(struct uwb_rc *rc, struct device *parent_dev, void *priv)
+{
+ int result;
+ struct device *dev;
+ char macbuf[UWB_ADDR_STRSIZE], devbuf[UWB_ADDR_STRSIZE];
+
+ rc->index = uwb_rc_new_index();
+
+ dev = &rc->uwb_dev.dev;
+ dev_set_name(dev, "uwb%d", rc->index);
+
+ rc->priv = priv;
+
+ init_waitqueue_head(&rc->uwbd.wq);
+ INIT_LIST_HEAD(&rc->uwbd.event_list);
+ spin_lock_init(&rc->uwbd.event_list_lock);
+
+ uwbd_start(rc);
+
+ result = rc->start(rc);
+ if (result < 0)
+ goto error_rc_start;
+
+ result = uwb_rc_setup(rc);
+ if (result < 0) {
+ dev_err(dev, "cannot setup UWB radio controller: %d\n", result);
+ goto error_rc_setup;
+ }
+
+ result = uwb_dev_add(&rc->uwb_dev, parent_dev, rc);
+ if (result < 0 && result != -EADDRNOTAVAIL)
+ goto error_dev_add;
+
+ result = uwb_rc_sys_add(rc);
+ if (result < 0) {
+ dev_err(parent_dev, "cannot register UWB radio controller "
+ "dev attributes: %d\n", result);
+ goto error_sys_add;
+ }
+
+ uwb_mac_addr_print(macbuf, sizeof(macbuf), &rc->uwb_dev.mac_addr);
+ uwb_dev_addr_print(devbuf, sizeof(devbuf), &rc->uwb_dev.dev_addr);
+ dev_info(dev,
+ "new uwb radio controller (mac %s dev %s) on %s %s\n",
+ macbuf, devbuf, parent_dev->bus->name, dev_name(parent_dev));
+ rc->ready = 1;
+ return 0;
+
+error_sys_add:
+ uwb_dev_rm(&rc->uwb_dev);
+error_dev_add:
+error_rc_setup:
+ rc->stop(rc);
+error_rc_start:
+ uwbd_stop(rc);
+ return result;
+}
+EXPORT_SYMBOL_GPL(uwb_rc_add);
+
+
+static int uwb_dev_offair_helper(struct device *dev, void *priv)
+{
+ struct uwb_dev *uwb_dev = to_uwb_dev(dev);
+
+ return __uwb_dev_offair(uwb_dev, uwb_dev->rc);
+}
+
+/*
+ * Remove a Radio Controller; stop beaconing/scanning, disconnect all children
+ */
+void uwb_rc_rm(struct uwb_rc *rc)
+{
+ rc->ready = 0;
+
+ uwb_dbg_del_rc(rc);
+ uwb_rsv_remove_all(rc);
+ uwb_radio_shutdown(rc);
+
+ rc->stop(rc);
+
+ uwbd_stop(rc);
+ uwb_rc_neh_destroy(rc);
+
+ uwb_dev_lock(&rc->uwb_dev);
+ rc->priv = NULL;
+ rc->cmd = NULL;
+ uwb_dev_unlock(&rc->uwb_dev);
+ mutex_lock(&rc->uwb_beca.mutex);
+ uwb_dev_for_each(rc, uwb_dev_offair_helper, NULL);
+ __uwb_rc_sys_rm(rc);
+ mutex_unlock(&rc->uwb_beca.mutex);
+ uwb_rsv_cleanup(rc);
+ uwb_beca_release(rc);
+ uwb_dev_rm(&rc->uwb_dev);
+}
+EXPORT_SYMBOL_GPL(uwb_rc_rm);
+
+static int find_rc_try_get(struct device *dev, const void *data)
+{
+ const struct uwb_rc *target_rc = data;
+ struct uwb_rc *rc = dev_get_drvdata(dev);
+
+ if (rc == NULL) {
+ WARN_ON(1);
+ return 0;
+ }
+ if (rc == target_rc) {
+ if (rc->ready == 0)
+ return 0;
+ else
+ return 1;
+ }
+ return 0;
+}
+
+/**
+ * Given a radio controller descriptor, validate and refcount it
+ *
+ * @returns NULL if the rc does not exist or is quiescing; the ptr to
+ * it otherwise.
+ */
+struct uwb_rc *__uwb_rc_try_get(struct uwb_rc *target_rc)
+{
+ struct device *dev;
+ struct uwb_rc *rc = NULL;
+
+ dev = class_find_device(&uwb_rc_class, NULL, target_rc,
+ find_rc_try_get);
+ if (dev) {
+ rc = dev_get_drvdata(dev);
+ __uwb_rc_get(rc);
+ }
+ return rc;
+}
+EXPORT_SYMBOL_GPL(__uwb_rc_try_get);
+
+/*
+ * RC get for external refcount acquirers...
+ *
+ * Increments the refcount of the device and it's backend modules
+ */
+static inline struct uwb_rc *uwb_rc_get(struct uwb_rc *rc)
+{
+ if (rc->ready == 0)
+ return NULL;
+ uwb_dev_get(&rc->uwb_dev);
+ return rc;
+}
+
+static int find_rc_grandpa(struct device *dev, const void *data)
+{
+ const struct device *grandpa_dev = data;
+ struct uwb_rc *rc = dev_get_drvdata(dev);
+
+ if (rc->uwb_dev.dev.parent->parent == grandpa_dev) {
+ rc = uwb_rc_get(rc);
+ return 1;
+ }
+ return 0;
+}
+
+/**
+ * Locate and refcount a radio controller given a common grand-parent
+ *
+ * @grandpa_dev Pointer to the 'grandparent' device structure.
+ * @returns NULL If the rc does not exist or is quiescing; the ptr to
+ * it otherwise, properly referenced.
+ *
+ * The Radio Control interface (or the UWB Radio Controller) is always
+ * an interface of a device. The parent is the interface, the
+ * grandparent is the device that encapsulates the interface.
+ *
+ * There is no need to lock around as the "grandpa" would be
+ * refcounted by the target, and to remove the referemes, the
+ * uwb_rc_class->sem would have to be taken--we hold it, ergo we
+ * should be safe.
+ */
+struct uwb_rc *uwb_rc_get_by_grandpa(const struct device *grandpa_dev)
+{
+ struct device *dev;
+ struct uwb_rc *rc = NULL;
+
+ dev = class_find_device(&uwb_rc_class, NULL, grandpa_dev,
+ find_rc_grandpa);
+ if (dev)
+ rc = dev_get_drvdata(dev);
+ return rc;
+}
+EXPORT_SYMBOL_GPL(uwb_rc_get_by_grandpa);
+
+/**
+ * Find a radio controller by device address
+ *
+ * @returns the pointer to the radio controller, properly referenced
+ */
+static int find_rc_dev(struct device *dev, const void *data)
+{
+ const struct uwb_dev_addr *addr = data;
+ struct uwb_rc *rc = dev_get_drvdata(dev);
+
+ if (rc == NULL) {
+ WARN_ON(1);
+ return 0;
+ }
+ if (!uwb_dev_addr_cmp(&rc->uwb_dev.dev_addr, addr)) {
+ rc = uwb_rc_get(rc);
+ return 1;
+ }
+ return 0;
+}
+
+struct uwb_rc *uwb_rc_get_by_dev(const struct uwb_dev_addr *addr)
+{
+ struct device *dev;
+ struct uwb_rc *rc = NULL;
+
+ dev = class_find_device(&uwb_rc_class, NULL, addr, find_rc_dev);
+ if (dev)
+ rc = dev_get_drvdata(dev);
+
+ return rc;
+}
+EXPORT_SYMBOL_GPL(uwb_rc_get_by_dev);
+
+/**
+ * Drop a reference on a radio controller
+ *
+ * This is the version that should be done by entities external to the
+ * UWB Radio Control stack (ie: clients of the API).
+ */
+void uwb_rc_put(struct uwb_rc *rc)
+{
+ __uwb_rc_put(rc);
+}
+EXPORT_SYMBOL_GPL(uwb_rc_put);
diff --git a/drivers/uwb/neh.c b/drivers/uwb/neh.c
new file mode 100644
index 000000000..8cb71bb33
--- /dev/null
+++ b/drivers/uwb/neh.c
@@ -0,0 +1,622 @@
+/*
+ * WUSB Wire Adapter: Radio Control Interface (WUSB[8])
+ * Notification and Event Handling
+ *
+ * Copyright (C) 2005-2006 Intel Corporation
+ * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ *
+ *
+ * The RC interface of the Host Wire Adapter (USB dongle) or WHCI PCI
+ * card delivers a stream of notifications and events to the
+ * notification end event endpoint or area. This code takes care of
+ * getting a buffer with that data, breaking it up in separate
+ * notifications and events and then deliver those.
+ *
+ * Events are answers to commands and they carry a context ID that
+ * associates them to the command. Notifications are that,
+ * notifications, they come out of the blue and have a context ID of
+ * zero. Think of the context ID kind of like a handler. The
+ * uwb_rc_neh_* code deals with managing context IDs.
+ *
+ * This is why you require a handle to operate on a UWB host. When you
+ * open a handle a context ID is assigned to you.
+ *
+ * So, as it is done is:
+ *
+ * 1. Add an event handler [uwb_rc_neh_add()] (assigns a ctx id)
+ * 2. Issue command [rc->cmd(rc, ...)]
+ * 3. Arm the timeout timer [uwb_rc_neh_arm()]
+ * 4, Release the reference to the neh [uwb_rc_neh_put()]
+ * 5. Wait for the callback
+ * 6. Command result (RCEB) is passed to the callback
+ *
+ * If (2) fails, you should remove the handle [uwb_rc_neh_rm()]
+ * instead of arming the timer.
+ *
+ * Handles are for using in *serialized* code, single thread.
+ *
+ * When the notification/event comes, the IRQ handler/endpoint
+ * callback passes the data read to uwb_rc_neh_grok() which will break
+ * it up in a discrete series of events, look up who is listening for
+ * them and execute the pertinent callbacks.
+ *
+ * If the reader detects an error while reading the data stream, call
+ * uwb_rc_neh_error().
+ *
+ * CONSTRAINTS/ASSUMPTIONS:
+ *
+ * - Most notifications/events are small (less thank .5k), copying
+ * around is ok.
+ *
+ * - Notifications/events are ALWAYS smaller than PAGE_SIZE
+ *
+ * - Notifications/events always come in a single piece (ie: a buffer
+ * will always contain entire notifications/events).
+ *
+ * - we cannot know in advance how long each event is (because they
+ * lack a length field in their header--smart move by the standards
+ * body, btw). So we need a facility to get the event size given the
+ * header. This is what the EST code does (notif/Event Size
+ * Tables), check nest.c--as well, you can associate the size to
+ * the handle [w/ neh->extra_size()].
+ *
+ * - Most notifications/events are fixed size; only a few are variable
+ * size (NEST takes care of that).
+ *
+ * - Listeners of events expect them, so they usually provide a
+ * buffer, as they know the size. Listeners to notifications don't,
+ * so we allocate their buffers dynamically.
+ */
+#include <linux/kernel.h>
+#include <linux/timer.h>
+#include <linux/slab.h>
+#include <linux/err.h>
+#include <linux/export.h>
+
+#include "uwb-internal.h"
+
+/*
+ * UWB Radio Controller Notification/Event Handle
+ *
+ * Represents an entity waiting for an event coming from the UWB Radio
+ * Controller with a given context id (context) and type (evt_type and
+ * evt). On reception of the notification/event, the callback (cb) is
+ * called with the event.
+ *
+ * If the timer expires before the event is received, the callback is
+ * called with -ETIMEDOUT as the event size.
+ */
+struct uwb_rc_neh {
+ struct kref kref;
+
+ struct uwb_rc *rc;
+ u8 evt_type;
+ __le16 evt;
+ u8 context;
+ u8 completed;
+ uwb_rc_cmd_cb_f cb;
+ void *arg;
+
+ struct timer_list timer;
+ struct list_head list_node;
+};
+
+static void uwb_rc_neh_timer(unsigned long arg);
+
+static void uwb_rc_neh_release(struct kref *kref)
+{
+ struct uwb_rc_neh *neh = container_of(kref, struct uwb_rc_neh, kref);
+
+ kfree(neh);
+}
+
+static void uwb_rc_neh_get(struct uwb_rc_neh *neh)
+{
+ kref_get(&neh->kref);
+}
+
+/**
+ * uwb_rc_neh_put - release reference to a neh
+ * @neh: the neh
+ */
+void uwb_rc_neh_put(struct uwb_rc_neh *neh)
+{
+ kref_put(&neh->kref, uwb_rc_neh_release);
+}
+
+
+/**
+ * Assigns @neh a context id from @rc's pool
+ *
+ * @rc: UWB Radio Controller descriptor; @rc->neh_lock taken
+ * @neh: Notification/Event Handle
+ * @returns 0 if context id was assigned ok; < 0 errno on error (if
+ * all the context IDs are taken).
+ *
+ * (assumes @wa is locked).
+ *
+ * NOTE: WUSB spec reserves context ids 0x00 for notifications and
+ * 0xff is invalid, so they must not be used. Initialization
+ * fills up those two in the bitmap so they are not allocated.
+ *
+ * We spread the allocation around to reduce the possibility of two
+ * consecutive opened @neh's getting the same context ID assigned (to
+ * avoid surprises with late events that timed out long time ago). So
+ * first we search from where @rc->ctx_roll is, if not found, we
+ * search from zero.
+ */
+static
+int __uwb_rc_ctx_get(struct uwb_rc *rc, struct uwb_rc_neh *neh)
+{
+ int result;
+ result = find_next_zero_bit(rc->ctx_bm, UWB_RC_CTX_MAX,
+ rc->ctx_roll++);
+ if (result < UWB_RC_CTX_MAX)
+ goto found;
+ result = find_first_zero_bit(rc->ctx_bm, UWB_RC_CTX_MAX);
+ if (result < UWB_RC_CTX_MAX)
+ goto found;
+ return -ENFILE;
+found:
+ set_bit(result, rc->ctx_bm);
+ neh->context = result;
+ return 0;
+}
+
+
+/** Releases @neh's context ID back to @rc (@rc->neh_lock is locked). */
+static
+void __uwb_rc_ctx_put(struct uwb_rc *rc, struct uwb_rc_neh *neh)
+{
+ struct device *dev = &rc->uwb_dev.dev;
+ if (neh->context == 0)
+ return;
+ if (test_bit(neh->context, rc->ctx_bm) == 0) {
+ dev_err(dev, "context %u not set in bitmap\n",
+ neh->context);
+ WARN_ON(1);
+ }
+ clear_bit(neh->context, rc->ctx_bm);
+ neh->context = 0;
+}
+
+/**
+ * uwb_rc_neh_add - add a neh for a radio controller command
+ * @rc: the radio controller
+ * @cmd: the radio controller command
+ * @expected_type: the type of the expected response event
+ * @expected_event: the expected event ID
+ * @cb: callback for when the event is received
+ * @arg: argument for the callback
+ *
+ * Creates a neh and adds it to the list of those waiting for an
+ * event. A context ID will be assigned to the command.
+ */
+struct uwb_rc_neh *uwb_rc_neh_add(struct uwb_rc *rc, struct uwb_rccb *cmd,
+ u8 expected_type, u16 expected_event,
+ uwb_rc_cmd_cb_f cb, void *arg)
+{
+ int result;
+ unsigned long flags;
+ struct device *dev = &rc->uwb_dev.dev;
+ struct uwb_rc_neh *neh;
+
+ neh = kzalloc(sizeof(*neh), GFP_KERNEL);
+ if (neh == NULL) {
+ result = -ENOMEM;
+ goto error_kzalloc;
+ }
+
+ kref_init(&neh->kref);
+ INIT_LIST_HEAD(&neh->list_node);
+ init_timer(&neh->timer);
+ neh->timer.function = uwb_rc_neh_timer;
+ neh->timer.data = (unsigned long)neh;
+
+ neh->rc = rc;
+ neh->evt_type = expected_type;
+ neh->evt = cpu_to_le16(expected_event);
+ neh->cb = cb;
+ neh->arg = arg;
+
+ spin_lock_irqsave(&rc->neh_lock, flags);
+ result = __uwb_rc_ctx_get(rc, neh);
+ if (result >= 0) {
+ cmd->bCommandContext = neh->context;
+ list_add_tail(&neh->list_node, &rc->neh_list);
+ uwb_rc_neh_get(neh);
+ }
+ spin_unlock_irqrestore(&rc->neh_lock, flags);
+ if (result < 0)
+ goto error_ctx_get;
+
+ return neh;
+
+error_ctx_get:
+ kfree(neh);
+error_kzalloc:
+ dev_err(dev, "cannot open handle to radio controller: %d\n", result);
+ return ERR_PTR(result);
+}
+
+static void __uwb_rc_neh_rm(struct uwb_rc *rc, struct uwb_rc_neh *neh)
+{
+ __uwb_rc_ctx_put(rc, neh);
+ list_del(&neh->list_node);
+}
+
+/**
+ * uwb_rc_neh_rm - remove a neh.
+ * @rc: the radio controller
+ * @neh: the neh to remove
+ *
+ * Remove an active neh immediately instead of waiting for the event
+ * (or a time out).
+ */
+void uwb_rc_neh_rm(struct uwb_rc *rc, struct uwb_rc_neh *neh)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&rc->neh_lock, flags);
+ __uwb_rc_neh_rm(rc, neh);
+ spin_unlock_irqrestore(&rc->neh_lock, flags);
+
+ del_timer_sync(&neh->timer);
+ uwb_rc_neh_put(neh);
+}
+
+/**
+ * uwb_rc_neh_arm - arm an event handler timeout timer
+ *
+ * @rc: UWB Radio Controller
+ * @neh: Notification/event handler for @rc
+ *
+ * The timer is only armed if the neh is active.
+ */
+void uwb_rc_neh_arm(struct uwb_rc *rc, struct uwb_rc_neh *neh)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&rc->neh_lock, flags);
+ if (neh->context)
+ mod_timer(&neh->timer,
+ jiffies + msecs_to_jiffies(UWB_RC_CMD_TIMEOUT_MS));
+ spin_unlock_irqrestore(&rc->neh_lock, flags);
+}
+
+static void uwb_rc_neh_cb(struct uwb_rc_neh *neh, struct uwb_rceb *rceb, size_t size)
+{
+ (*neh->cb)(neh->rc, neh->arg, rceb, size);
+ uwb_rc_neh_put(neh);
+}
+
+static bool uwb_rc_neh_match(struct uwb_rc_neh *neh, const struct uwb_rceb *rceb)
+{
+ return neh->evt_type == rceb->bEventType
+ && neh->evt == rceb->wEvent
+ && neh->context == rceb->bEventContext;
+}
+
+/**
+ * Find the handle waiting for a RC Radio Control Event
+ *
+ * @rc: UWB Radio Controller
+ * @rceb: Pointer to the RCEB buffer
+ * @event_size: Pointer to the size of the RCEB buffer. Might be
+ * adjusted to take into account the @neh->extra_size
+ * settings.
+ *
+ * If the listener has no buffer (NULL buffer), one is allocated for
+ * the right size (the amount of data received). @neh->ptr will point
+ * to the event payload, which always starts with a 'struct
+ * uwb_rceb'. kfree() it when done.
+ */
+static
+struct uwb_rc_neh *uwb_rc_neh_lookup(struct uwb_rc *rc,
+ const struct uwb_rceb *rceb)
+{
+ struct uwb_rc_neh *neh = NULL, *h;
+ unsigned long flags;
+
+ spin_lock_irqsave(&rc->neh_lock, flags);
+
+ list_for_each_entry(h, &rc->neh_list, list_node) {
+ if (uwb_rc_neh_match(h, rceb)) {
+ neh = h;
+ break;
+ }
+ }
+
+ if (neh)
+ __uwb_rc_neh_rm(rc, neh);
+
+ spin_unlock_irqrestore(&rc->neh_lock, flags);
+
+ return neh;
+}
+
+
+/*
+ * Process notifications coming from the radio control interface
+ *
+ * @rc: UWB Radio Control Interface descriptor
+ * @neh: Notification/Event Handler @neh->ptr points to
+ * @uwb_evt->buffer.
+ *
+ * This function is called by the event/notif handling subsystem when
+ * notifications arrive (hwarc_probe() arms a notification/event handle
+ * that calls back this function for every received notification; this
+ * function then will rearm itself).
+ *
+ * Notification data buffers are dynamically allocated by the NEH
+ * handling code in neh.c [uwb_rc_neh_lookup()]. What is actually
+ * allocated is space to contain the notification data.
+ *
+ * Buffers are prefixed with a Radio Control Event Block (RCEB) as
+ * defined by the WUSB Wired-Adapter Radio Control interface. We
+ * just use it for the notification code.
+ *
+ * On each case statement we just transcode endianess of the different
+ * fields. We declare a pointer to a RCI definition of an event, and
+ * then to a UWB definition of the same event (which are the same,
+ * remember). Event if we use different pointers
+ */
+static
+void uwb_rc_notif(struct uwb_rc *rc, struct uwb_rceb *rceb, ssize_t size)
+{
+ struct device *dev = &rc->uwb_dev.dev;
+ struct uwb_event *uwb_evt;
+
+ if (size == -ESHUTDOWN)
+ return;
+ if (size < 0) {
+ dev_err(dev, "ignoring event with error code %zu\n",
+ size);
+ return;
+ }
+
+ uwb_evt = kzalloc(sizeof(*uwb_evt), GFP_ATOMIC);
+ if (unlikely(uwb_evt == NULL)) {
+ dev_err(dev, "no memory to queue event 0x%02x/%04x/%02x\n",
+ rceb->bEventType, le16_to_cpu(rceb->wEvent),
+ rceb->bEventContext);
+ return;
+ }
+ uwb_evt->rc = __uwb_rc_get(rc); /* will be put by uwbd's uwbd_event_handle() */
+ uwb_evt->ts_jiffies = jiffies;
+ uwb_evt->type = UWB_EVT_TYPE_NOTIF;
+ uwb_evt->notif.size = size;
+ uwb_evt->notif.rceb = rceb;
+
+ uwbd_event_queue(uwb_evt);
+}
+
+static void uwb_rc_neh_grok_event(struct uwb_rc *rc, struct uwb_rceb *rceb, size_t size)
+{
+ struct device *dev = &rc->uwb_dev.dev;
+ struct uwb_rc_neh *neh;
+ struct uwb_rceb *notif;
+ unsigned long flags;
+
+ if (rceb->bEventContext == 0) {
+ notif = kmalloc(size, GFP_ATOMIC);
+ if (notif) {
+ memcpy(notif, rceb, size);
+ uwb_rc_notif(rc, notif, size);
+ } else
+ dev_err(dev, "event 0x%02x/%04x/%02x (%zu bytes): no memory\n",
+ rceb->bEventType, le16_to_cpu(rceb->wEvent),
+ rceb->bEventContext, size);
+ } else {
+ neh = uwb_rc_neh_lookup(rc, rceb);
+ if (neh) {
+ spin_lock_irqsave(&rc->neh_lock, flags);
+ /* to guard against a timeout */
+ neh->completed = 1;
+ del_timer(&neh->timer);
+ spin_unlock_irqrestore(&rc->neh_lock, flags);
+ uwb_rc_neh_cb(neh, rceb, size);
+ } else
+ dev_warn(dev, "event 0x%02x/%04x/%02x (%zu bytes): nobody cared\n",
+ rceb->bEventType, le16_to_cpu(rceb->wEvent),
+ rceb->bEventContext, size);
+ }
+}
+
+/**
+ * Given a buffer with one or more UWB RC events/notifications, break
+ * them up and dispatch them.
+ *
+ * @rc: UWB Radio Controller
+ * @buf: Buffer with the stream of notifications/events
+ * @buf_size: Amount of data in the buffer
+ *
+ * Note each notification/event starts always with a 'struct
+ * uwb_rceb', so the minimum size if 4 bytes.
+ *
+ * The device may pass us events formatted differently than expected.
+ * These are first filtered, potentially creating a new event in a new
+ * memory location. If a new event is created by the filter it is also
+ * freed here.
+ *
+ * For each notif/event, tries to guess the size looking at the EST
+ * tables, then looks for a neh that is waiting for that event and if
+ * found, copies the payload to the neh's buffer and calls it back. If
+ * not, the data is ignored.
+ *
+ * Note that if we can't find a size description in the EST tables, we
+ * still might find a size in the 'neh' handle in uwb_rc_neh_lookup().
+ *
+ * Assumptions:
+ *
+ * @rc->neh_lock is NOT taken
+ *
+ * We keep track of various sizes here:
+ * size: contains the size of the buffer that is processed for the
+ * incoming event. this buffer may contain events that are not
+ * formatted as WHCI.
+ * real_size: the actual space taken by this event in the buffer.
+ * We need to keep track of the real size of an event to be able to
+ * advance the buffer correctly.
+ * event_size: the size of the event as expected by the core layer
+ * [OR] the size of the event after filtering. if the filtering
+ * created a new event in a new memory location then this is
+ * effectively the size of a new event buffer
+ */
+void uwb_rc_neh_grok(struct uwb_rc *rc, void *buf, size_t buf_size)
+{
+ struct device *dev = &rc->uwb_dev.dev;
+ void *itr;
+ struct uwb_rceb *rceb;
+ size_t size, real_size, event_size;
+ int needtofree;
+
+ itr = buf;
+ size = buf_size;
+ while (size > 0) {
+ if (size < sizeof(*rceb)) {
+ dev_err(dev, "not enough data in event buffer to "
+ "process incoming events (%zu left, minimum is "
+ "%zu)\n", size, sizeof(*rceb));
+ break;
+ }
+
+ rceb = itr;
+ if (rc->filter_event) {
+ needtofree = rc->filter_event(rc, &rceb, size,
+ &real_size, &event_size);
+ if (needtofree < 0 && needtofree != -ENOANO) {
+ dev_err(dev, "BUG: Unable to filter event "
+ "(0x%02x/%04x/%02x) from "
+ "device. \n", rceb->bEventType,
+ le16_to_cpu(rceb->wEvent),
+ rceb->bEventContext);
+ break;
+ }
+ } else
+ needtofree = -ENOANO;
+ /* do real processing if there was no filtering or the
+ * filtering didn't act */
+ if (needtofree == -ENOANO) {
+ ssize_t ret = uwb_est_find_size(rc, rceb, size);
+ if (ret < 0)
+ break;
+ if (ret > size) {
+ dev_err(dev, "BUG: hw sent incomplete event "
+ "0x%02x/%04x/%02x (%zd bytes), only got "
+ "%zu bytes. We don't handle that.\n",
+ rceb->bEventType, le16_to_cpu(rceb->wEvent),
+ rceb->bEventContext, ret, size);
+ break;
+ }
+ real_size = event_size = ret;
+ }
+ uwb_rc_neh_grok_event(rc, rceb, event_size);
+
+ if (needtofree == 1)
+ kfree(rceb);
+
+ itr += real_size;
+ size -= real_size;
+ }
+}
+EXPORT_SYMBOL_GPL(uwb_rc_neh_grok);
+
+
+/**
+ * The entity that reads from the device notification/event channel has
+ * detected an error.
+ *
+ * @rc: UWB Radio Controller
+ * @error: Errno error code
+ *
+ */
+void uwb_rc_neh_error(struct uwb_rc *rc, int error)
+{
+ struct uwb_rc_neh *neh;
+ unsigned long flags;
+
+ for (;;) {
+ spin_lock_irqsave(&rc->neh_lock, flags);
+ if (list_empty(&rc->neh_list)) {
+ spin_unlock_irqrestore(&rc->neh_lock, flags);
+ break;
+ }
+ neh = list_first_entry(&rc->neh_list, struct uwb_rc_neh, list_node);
+ __uwb_rc_neh_rm(rc, neh);
+ spin_unlock_irqrestore(&rc->neh_lock, flags);
+
+ del_timer_sync(&neh->timer);
+ uwb_rc_neh_cb(neh, NULL, error);
+ }
+}
+EXPORT_SYMBOL_GPL(uwb_rc_neh_error);
+
+
+static void uwb_rc_neh_timer(unsigned long arg)
+{
+ struct uwb_rc_neh *neh = (struct uwb_rc_neh *)arg;
+ struct uwb_rc *rc = neh->rc;
+ unsigned long flags;
+
+ spin_lock_irqsave(&rc->neh_lock, flags);
+ if (neh->completed) {
+ spin_unlock_irqrestore(&rc->neh_lock, flags);
+ return;
+ }
+ if (neh->context)
+ __uwb_rc_neh_rm(rc, neh);
+ else
+ neh = NULL;
+ spin_unlock_irqrestore(&rc->neh_lock, flags);
+
+ if (neh)
+ uwb_rc_neh_cb(neh, NULL, -ETIMEDOUT);
+}
+
+/** Initializes the @rc's neh subsystem
+ */
+void uwb_rc_neh_create(struct uwb_rc *rc)
+{
+ spin_lock_init(&rc->neh_lock);
+ INIT_LIST_HEAD(&rc->neh_list);
+ set_bit(0, rc->ctx_bm); /* 0 is reserved (see [WUSB] table 8-65) */
+ set_bit(0xff, rc->ctx_bm); /* and 0xff is invalid */
+ rc->ctx_roll = 1;
+}
+
+
+/** Release's the @rc's neh subsystem */
+void uwb_rc_neh_destroy(struct uwb_rc *rc)
+{
+ unsigned long flags;
+ struct uwb_rc_neh *neh;
+
+ for (;;) {
+ spin_lock_irqsave(&rc->neh_lock, flags);
+ if (list_empty(&rc->neh_list)) {
+ spin_unlock_irqrestore(&rc->neh_lock, flags);
+ break;
+ }
+ neh = list_first_entry(&rc->neh_list, struct uwb_rc_neh, list_node);
+ __uwb_rc_neh_rm(rc, neh);
+ spin_unlock_irqrestore(&rc->neh_lock, flags);
+
+ del_timer_sync(&neh->timer);
+ uwb_rc_neh_put(neh);
+ }
+}
diff --git a/drivers/uwb/pal.c b/drivers/uwb/pal.c
new file mode 100644
index 000000000..c1304b8d4
--- /dev/null
+++ b/drivers/uwb/pal.c
@@ -0,0 +1,137 @@
+/*
+ * UWB PAL support.
+ *
+ * Copyright (C) 2008 Cambridge Silicon Radio Ltd.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+#include <linux/kernel.h>
+#include <linux/debugfs.h>
+#include <linux/uwb.h>
+#include <linux/export.h>
+
+#include "uwb-internal.h"
+
+/**
+ * uwb_pal_init - initialize a UWB PAL
+ * @pal: the PAL to initialize
+ */
+void uwb_pal_init(struct uwb_pal *pal)
+{
+ INIT_LIST_HEAD(&pal->node);
+}
+EXPORT_SYMBOL_GPL(uwb_pal_init);
+
+/**
+ * uwb_pal_register - register a UWB PAL
+ * @pal: the PAL
+ *
+ * The PAL must be initialized with uwb_pal_init().
+ */
+int uwb_pal_register(struct uwb_pal *pal)
+{
+ struct uwb_rc *rc = pal->rc;
+ int ret;
+
+ if (pal->device) {
+ /* create a link to the uwb_rc in the PAL device's directory. */
+ ret = sysfs_create_link(&pal->device->kobj,
+ &rc->uwb_dev.dev.kobj, "uwb_rc");
+ if (ret < 0)
+ return ret;
+ /* create a link to the PAL in the UWB device's directory. */
+ ret = sysfs_create_link(&rc->uwb_dev.dev.kobj,
+ &pal->device->kobj, pal->name);
+ if (ret < 0) {
+ sysfs_remove_link(&pal->device->kobj, "uwb_rc");
+ return ret;
+ }
+ }
+
+ pal->debugfs_dir = uwb_dbg_create_pal_dir(pal);
+
+ mutex_lock(&rc->uwb_dev.mutex);
+ list_add(&pal->node, &rc->pals);
+ mutex_unlock(&rc->uwb_dev.mutex);
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(uwb_pal_register);
+
+static int find_rc(struct device *dev, const void *data)
+{
+ const struct uwb_rc *target_rc = data;
+ struct uwb_rc *rc = dev_get_drvdata(dev);
+
+ if (rc == NULL) {
+ WARN_ON(1);
+ return 0;
+ }
+ if (rc == target_rc) {
+ if (rc->ready == 0)
+ return 0;
+ else
+ return 1;
+ }
+ return 0;
+}
+
+/**
+ * Given a radio controller descriptor see if it is registered.
+ *
+ * @returns false if the rc does not exist or is quiescing; true otherwise.
+ */
+static bool uwb_rc_class_device_exists(struct uwb_rc *target_rc)
+{
+ struct device *dev;
+
+ dev = class_find_device(&uwb_rc_class, NULL, target_rc, find_rc);
+
+ return (dev != NULL);
+}
+
+/**
+ * uwb_pal_unregister - unregister a UWB PAL
+ * @pal: the PAL
+ */
+void uwb_pal_unregister(struct uwb_pal *pal)
+{
+ struct uwb_rc *rc = pal->rc;
+
+ uwb_radio_stop(pal);
+
+ mutex_lock(&rc->uwb_dev.mutex);
+ list_del(&pal->node);
+ mutex_unlock(&rc->uwb_dev.mutex);
+
+ debugfs_remove(pal->debugfs_dir);
+
+ if (pal->device) {
+ /* remove link to the PAL in the UWB device's directory. */
+ if (uwb_rc_class_device_exists(rc))
+ sysfs_remove_link(&rc->uwb_dev.dev.kobj, pal->name);
+
+ /* remove link to uwb_rc in the PAL device's directory. */
+ sysfs_remove_link(&pal->device->kobj, "uwb_rc");
+ }
+}
+EXPORT_SYMBOL_GPL(uwb_pal_unregister);
+
+/**
+ * uwb_rc_pal_init - initialize the PAL related parts of a radio controller
+ * @rc: the radio controller
+ */
+void uwb_rc_pal_init(struct uwb_rc *rc)
+{
+ INIT_LIST_HEAD(&rc->pals);
+}
diff --git a/drivers/uwb/radio.c b/drivers/uwb/radio.c
new file mode 100644
index 000000000..2427e9448
--- /dev/null
+++ b/drivers/uwb/radio.c
@@ -0,0 +1,207 @@
+/*
+ * UWB radio (channel) management.
+ *
+ * Copyright (C) 2008 Cambridge Silicon Radio Ltd.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+#include <linux/kernel.h>
+#include <linux/uwb.h>
+#include <linux/export.h>
+
+#include "uwb-internal.h"
+
+
+static int uwb_radio_select_channel(struct uwb_rc *rc)
+{
+ /*
+ * Default to channel 9 (BG1, TFC1) unless the user has
+ * selected a specific channel or there are no active PALs.
+ */
+ if (rc->active_pals == 0)
+ return -1;
+ if (rc->beaconing_forced)
+ return rc->beaconing_forced;
+ return 9;
+}
+
+
+/*
+ * Notify all active PALs that the channel has changed.
+ */
+static void uwb_radio_channel_changed(struct uwb_rc *rc, int channel)
+{
+ struct uwb_pal *pal;
+
+ list_for_each_entry(pal, &rc->pals, node) {
+ if (pal->channel && channel != pal->channel) {
+ pal->channel = channel;
+ if (pal->channel_changed)
+ pal->channel_changed(pal, pal->channel);
+ }
+ }
+}
+
+/*
+ * Change to a new channel and notify any active PALs of the new
+ * channel.
+ *
+ * When stopping the radio, PALs need to be notified first so they can
+ * terminate any active reservations.
+ */
+static int uwb_radio_change_channel(struct uwb_rc *rc, int channel)
+{
+ int ret = 0;
+ struct device *dev = &rc->uwb_dev.dev;
+
+ dev_dbg(dev, "%s: channel = %d, rc->beaconing = %d\n", __func__,
+ channel, rc->beaconing);
+
+ if (channel == -1)
+ uwb_radio_channel_changed(rc, channel);
+
+ if (channel != rc->beaconing) {
+ if (rc->beaconing != -1 && channel != -1) {
+ /*
+ * FIXME: should signal the channel change
+ * with a Channel Change IE.
+ */
+ ret = uwb_radio_change_channel(rc, -1);
+ if (ret < 0)
+ return ret;
+ }
+ ret = uwb_rc_beacon(rc, channel, 0);
+ }
+
+ if (channel != -1)
+ uwb_radio_channel_changed(rc, rc->beaconing);
+
+ return ret;
+}
+
+/**
+ * uwb_radio_start - request that the radio be started
+ * @pal: the PAL making the request.
+ *
+ * If the radio is not already active, a suitable channel is selected
+ * and beacons are started.
+ */
+int uwb_radio_start(struct uwb_pal *pal)
+{
+ struct uwb_rc *rc = pal->rc;
+ int ret = 0;
+
+ mutex_lock(&rc->uwb_dev.mutex);
+
+ if (!pal->channel) {
+ pal->channel = -1;
+ rc->active_pals++;
+ ret = uwb_radio_change_channel(rc, uwb_radio_select_channel(rc));
+ }
+
+ mutex_unlock(&rc->uwb_dev.mutex);
+ return ret;
+}
+EXPORT_SYMBOL_GPL(uwb_radio_start);
+
+/**
+ * uwb_radio_stop - request that the radio be stopped.
+ * @pal: the PAL making the request.
+ *
+ * Stops the radio if no other PAL is making use of it.
+ */
+void uwb_radio_stop(struct uwb_pal *pal)
+{
+ struct uwb_rc *rc = pal->rc;
+
+ mutex_lock(&rc->uwb_dev.mutex);
+
+ if (pal->channel) {
+ rc->active_pals--;
+ uwb_radio_change_channel(rc, uwb_radio_select_channel(rc));
+ pal->channel = 0;
+ }
+
+ mutex_unlock(&rc->uwb_dev.mutex);
+}
+EXPORT_SYMBOL_GPL(uwb_radio_stop);
+
+/*
+ * uwb_radio_force_channel - force a specific channel to be used
+ * @rc: the radio controller.
+ * @channel: the channel to use; -1 to force the radio to stop; 0 to
+ * use the default channel selection algorithm.
+ */
+int uwb_radio_force_channel(struct uwb_rc *rc, int channel)
+{
+ int ret = 0;
+
+ mutex_lock(&rc->uwb_dev.mutex);
+
+ rc->beaconing_forced = channel;
+ ret = uwb_radio_change_channel(rc, uwb_radio_select_channel(rc));
+
+ mutex_unlock(&rc->uwb_dev.mutex);
+ return ret;
+}
+
+/*
+ * uwb_radio_setup - setup the radio manager
+ * @rc: the radio controller.
+ *
+ * The radio controller is reset to ensure it's in a known state
+ * before it's used.
+ */
+int uwb_radio_setup(struct uwb_rc *rc)
+{
+ return uwb_rc_reset(rc);
+}
+
+/*
+ * uwb_radio_reset_state - reset any radio manager state
+ * @rc: the radio controller.
+ *
+ * All internal radio manager state is reset to values corresponding
+ * to a reset radio controller.
+ */
+void uwb_radio_reset_state(struct uwb_rc *rc)
+{
+ struct uwb_pal *pal;
+
+ mutex_lock(&rc->uwb_dev.mutex);
+
+ list_for_each_entry(pal, &rc->pals, node) {
+ if (pal->channel) {
+ pal->channel = -1;
+ if (pal->channel_changed)
+ pal->channel_changed(pal, -1);
+ }
+ }
+
+ rc->beaconing = -1;
+ rc->scanning = -1;
+
+ mutex_unlock(&rc->uwb_dev.mutex);
+}
+
+/*
+ * uwb_radio_shutdown - shutdown the radio manager
+ * @rc: the radio controller.
+ *
+ * The radio controller is reset.
+ */
+void uwb_radio_shutdown(struct uwb_rc *rc)
+{
+ uwb_radio_reset_state(rc);
+ uwb_rc_reset(rc);
+}
diff --git a/drivers/uwb/reset.c b/drivers/uwb/reset.c
new file mode 100644
index 000000000..8b47c9cdd
--- /dev/null
+++ b/drivers/uwb/reset.c
@@ -0,0 +1,393 @@
+/*
+ * Ultra Wide Band
+ * UWB basic command support and radio reset
+ *
+ * Copyright (C) 2005-2006 Intel Corporation
+ * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ *
+ *
+ * FIXME:
+ *
+ * - docs
+ *
+ * - Now we are serializing (using the uwb_dev->mutex) the command
+ * execution; it should be parallelized as much as possible some
+ * day.
+ */
+#include <linux/kernel.h>
+#include <linux/err.h>
+#include <linux/slab.h>
+#include <linux/delay.h>
+#include <linux/export.h>
+
+#include "uwb-internal.h"
+
+/**
+ * Command result codes (WUSB1.0[T8-69])
+ */
+static
+const char *__strerror[] = {
+ "success",
+ "failure",
+ "hardware failure",
+ "no more slots",
+ "beacon is too large",
+ "invalid parameter",
+ "unsupported power level",
+ "time out (wa) or invalid ie data (whci)",
+ "beacon size exceeded",
+ "cancelled",
+ "invalid state",
+ "invalid size",
+ "ack not received",
+ "no more asie notification",
+};
+
+
+/** Return a string matching the given error code */
+const char *uwb_rc_strerror(unsigned code)
+{
+ if (code == 255)
+ return "time out";
+ if (code >= ARRAY_SIZE(__strerror))
+ return "unknown error";
+ return __strerror[code];
+}
+
+int uwb_rc_cmd_async(struct uwb_rc *rc, const char *cmd_name,
+ struct uwb_rccb *cmd, size_t cmd_size,
+ u8 expected_type, u16 expected_event,
+ uwb_rc_cmd_cb_f cb, void *arg)
+{
+ struct device *dev = &rc->uwb_dev.dev;
+ struct uwb_rc_neh *neh;
+ int needtofree = 0;
+ int result;
+
+ uwb_dev_lock(&rc->uwb_dev); /* Protect against rc->priv being removed */
+ if (rc->priv == NULL) {
+ uwb_dev_unlock(&rc->uwb_dev);
+ return -ESHUTDOWN;
+ }
+
+ if (rc->filter_cmd) {
+ needtofree = rc->filter_cmd(rc, &cmd, &cmd_size);
+ if (needtofree < 0 && needtofree != -ENOANO) {
+ dev_err(dev, "%s: filter error: %d\n",
+ cmd_name, needtofree);
+ uwb_dev_unlock(&rc->uwb_dev);
+ return needtofree;
+ }
+ }
+
+ neh = uwb_rc_neh_add(rc, cmd, expected_type, expected_event, cb, arg);
+ if (IS_ERR(neh)) {
+ result = PTR_ERR(neh);
+ uwb_dev_unlock(&rc->uwb_dev);
+ goto out;
+ }
+
+ result = rc->cmd(rc, cmd, cmd_size);
+ uwb_dev_unlock(&rc->uwb_dev);
+ if (result < 0)
+ uwb_rc_neh_rm(rc, neh);
+ else
+ uwb_rc_neh_arm(rc, neh);
+ uwb_rc_neh_put(neh);
+out:
+ if (needtofree == 1)
+ kfree(cmd);
+ return result < 0 ? result : 0;
+}
+EXPORT_SYMBOL_GPL(uwb_rc_cmd_async);
+
+struct uwb_rc_cmd_done_params {
+ struct completion completion;
+ struct uwb_rceb *reply;
+ ssize_t reply_size;
+};
+
+static void uwb_rc_cmd_done(struct uwb_rc *rc, void *arg,
+ struct uwb_rceb *reply, ssize_t reply_size)
+{
+ struct uwb_rc_cmd_done_params *p = (struct uwb_rc_cmd_done_params *)arg;
+
+ if (reply_size > 0) {
+ if (p->reply)
+ reply_size = min(p->reply_size, reply_size);
+ else
+ p->reply = kmalloc(reply_size, GFP_ATOMIC);
+
+ if (p->reply)
+ memcpy(p->reply, reply, reply_size);
+ else
+ reply_size = -ENOMEM;
+ }
+ p->reply_size = reply_size;
+ complete(&p->completion);
+}
+
+
+/**
+ * Generic function for issuing commands to the Radio Control Interface
+ *
+ * @rc: UWB Radio Control descriptor
+ * @cmd_name: Name of the command being issued (for error messages)
+ * @cmd: Pointer to rccb structure containing the command;
+ * normally you embed this structure as the first member of
+ * the full command structure.
+ * @cmd_size: Size of the whole command buffer pointed to by @cmd.
+ * @reply: Pointer to where to store the reply
+ * @reply_size: @reply's size
+ * @expected_type: Expected type in the return event
+ * @expected_event: Expected event code in the return event
+ * @preply: Here a pointer to where the event data is received will
+ * be stored. Once done with the data, free with kfree().
+ *
+ * This function is generic; it works for commands that return a fixed
+ * and known size or for commands that return a variable amount of data.
+ *
+ * If a buffer is provided, that is used, although it could be chopped
+ * to the maximum size of the buffer. If the buffer is NULL, then one
+ * be allocated in *preply with the whole contents of the reply.
+ *
+ * @rc needs to be referenced
+ */
+static
+ssize_t __uwb_rc_cmd(struct uwb_rc *rc, const char *cmd_name,
+ struct uwb_rccb *cmd, size_t cmd_size,
+ struct uwb_rceb *reply, size_t reply_size,
+ u8 expected_type, u16 expected_event,
+ struct uwb_rceb **preply)
+{
+ ssize_t result = 0;
+ struct device *dev = &rc->uwb_dev.dev;
+ struct uwb_rc_cmd_done_params params;
+
+ init_completion(&params.completion);
+ params.reply = reply;
+ params.reply_size = reply_size;
+
+ result = uwb_rc_cmd_async(rc, cmd_name, cmd, cmd_size,
+ expected_type, expected_event,
+ uwb_rc_cmd_done, &params);
+ if (result)
+ return result;
+
+ wait_for_completion(&params.completion);
+
+ if (preply)
+ *preply = params.reply;
+
+ if (params.reply_size < 0)
+ dev_err(dev, "%s: confirmation event 0x%02x/%04x/%02x "
+ "reception failed: %d\n", cmd_name,
+ expected_type, expected_event, cmd->bCommandContext,
+ (int)params.reply_size);
+ return params.reply_size;
+}
+
+
+/**
+ * Generic function for issuing commands to the Radio Control Interface
+ *
+ * @rc: UWB Radio Control descriptor
+ * @cmd_name: Name of the command being issued (for error messages)
+ * @cmd: Pointer to rccb structure containing the command;
+ * normally you embed this structure as the first member of
+ * the full command structure.
+ * @cmd_size: Size of the whole command buffer pointed to by @cmd.
+ * @reply: Pointer to the beginning of the confirmation event
+ * buffer. Normally bigger than an 'struct hwarc_rceb'.
+ * You need to fill out reply->bEventType and reply->wEvent (in
+ * cpu order) as the function will use them to verify the
+ * confirmation event.
+ * @reply_size: Size of the reply buffer
+ *
+ * The function checks that the length returned in the reply is at
+ * least as big as @reply_size; if not, it will be deemed an error and
+ * -EIO returned.
+ *
+ * @rc needs to be referenced
+ */
+ssize_t uwb_rc_cmd(struct uwb_rc *rc, const char *cmd_name,
+ struct uwb_rccb *cmd, size_t cmd_size,
+ struct uwb_rceb *reply, size_t reply_size)
+{
+ struct device *dev = &rc->uwb_dev.dev;
+ ssize_t result;
+
+ result = __uwb_rc_cmd(rc, cmd_name,
+ cmd, cmd_size, reply, reply_size,
+ reply->bEventType, reply->wEvent, NULL);
+
+ if (result > 0 && result < reply_size) {
+ dev_err(dev, "%s: not enough data returned for decoding reply "
+ "(%zu bytes received vs at least %zu needed)\n",
+ cmd_name, result, reply_size);
+ result = -EIO;
+ }
+ return result;
+}
+EXPORT_SYMBOL_GPL(uwb_rc_cmd);
+
+
+/**
+ * Generic function for issuing commands to the Radio Control
+ * Interface that return an unknown amount of data
+ *
+ * @rc: UWB Radio Control descriptor
+ * @cmd_name: Name of the command being issued (for error messages)
+ * @cmd: Pointer to rccb structure containing the command;
+ * normally you embed this structure as the first member of
+ * the full command structure.
+ * @cmd_size: Size of the whole command buffer pointed to by @cmd.
+ * @expected_type: Expected type in the return event
+ * @expected_event: Expected event code in the return event
+ * @preply: Here a pointer to where the event data is received will
+ * be stored. Once done with the data, free with kfree().
+ *
+ * The function checks that the length returned in the reply is at
+ * least as big as a 'struct uwb_rceb *'; if not, it will be deemed an
+ * error and -EIO returned.
+ *
+ * @rc needs to be referenced
+ */
+ssize_t uwb_rc_vcmd(struct uwb_rc *rc, const char *cmd_name,
+ struct uwb_rccb *cmd, size_t cmd_size,
+ u8 expected_type, u16 expected_event,
+ struct uwb_rceb **preply)
+{
+ return __uwb_rc_cmd(rc, cmd_name, cmd, cmd_size, NULL, 0,
+ expected_type, expected_event, preply);
+}
+EXPORT_SYMBOL_GPL(uwb_rc_vcmd);
+
+
+/**
+ * Reset a UWB Host Controller (and all radio settings)
+ *
+ * @rc: Host Controller descriptor
+ * @returns: 0 if ok, < 0 errno code on error
+ *
+ * We put the command on kmalloc'ed memory as some arches cannot do
+ * USB from the stack. The reply event is copied from an stage buffer,
+ * so it can be in the stack. See WUSB1.0[8.6.2.4] for more details.
+ */
+int uwb_rc_reset(struct uwb_rc *rc)
+{
+ int result = -ENOMEM;
+ struct uwb_rc_evt_confirm reply;
+ struct uwb_rccb *cmd;
+ size_t cmd_size = sizeof(*cmd);
+
+ mutex_lock(&rc->uwb_dev.mutex);
+ cmd = kzalloc(sizeof(*cmd), GFP_KERNEL);
+ if (cmd == NULL)
+ goto error_kzalloc;
+ cmd->bCommandType = UWB_RC_CET_GENERAL;
+ cmd->wCommand = cpu_to_le16(UWB_RC_CMD_RESET);
+ reply.rceb.bEventType = UWB_RC_CET_GENERAL;
+ reply.rceb.wEvent = UWB_RC_CMD_RESET;
+ result = uwb_rc_cmd(rc, "RESET", cmd, cmd_size,
+ &reply.rceb, sizeof(reply));
+ if (result < 0)
+ goto error_cmd;
+ if (reply.bResultCode != UWB_RC_RES_SUCCESS) {
+ dev_err(&rc->uwb_dev.dev,
+ "RESET: command execution failed: %s (%d)\n",
+ uwb_rc_strerror(reply.bResultCode), reply.bResultCode);
+ result = -EIO;
+ }
+error_cmd:
+ kfree(cmd);
+error_kzalloc:
+ mutex_unlock(&rc->uwb_dev.mutex);
+ return result;
+}
+
+int uwbd_msg_handle_reset(struct uwb_event *evt)
+{
+ struct uwb_rc *rc = evt->rc;
+ int ret;
+
+ dev_info(&rc->uwb_dev.dev, "resetting radio controller\n");
+ ret = rc->reset(rc);
+ if (ret < 0) {
+ dev_err(&rc->uwb_dev.dev, "failed to reset hardware: %d\n", ret);
+ goto error;
+ }
+ return 0;
+error:
+ /* Nothing can be done except try the reset again. Wait a bit
+ to avoid reset loops during probe() or remove(). */
+ msleep(1000);
+ uwb_rc_reset_all(rc);
+ return ret;
+}
+
+/**
+ * uwb_rc_reset_all - request a reset of the radio controller and PALs
+ * @rc: the radio controller of the hardware device to be reset.
+ *
+ * The full hardware reset of the radio controller and all the PALs
+ * will be scheduled.
+ */
+void uwb_rc_reset_all(struct uwb_rc *rc)
+{
+ struct uwb_event *evt;
+
+ evt = kzalloc(sizeof(struct uwb_event), GFP_ATOMIC);
+ if (unlikely(evt == NULL))
+ return;
+
+ evt->rc = __uwb_rc_get(rc); /* will be put by uwbd's uwbd_event_handle() */
+ evt->ts_jiffies = jiffies;
+ evt->type = UWB_EVT_TYPE_MSG;
+ evt->message = UWB_EVT_MSG_RESET;
+
+ uwbd_event_queue(evt);
+}
+EXPORT_SYMBOL_GPL(uwb_rc_reset_all);
+
+void uwb_rc_pre_reset(struct uwb_rc *rc)
+{
+ rc->stop(rc);
+ uwbd_flush(rc);
+
+ uwb_radio_reset_state(rc);
+ uwb_rsv_remove_all(rc);
+}
+EXPORT_SYMBOL_GPL(uwb_rc_pre_reset);
+
+int uwb_rc_post_reset(struct uwb_rc *rc)
+{
+ int ret;
+
+ ret = rc->start(rc);
+ if (ret)
+ goto out;
+ ret = uwb_rc_mac_addr_set(rc, &rc->uwb_dev.mac_addr);
+ if (ret)
+ goto out;
+ ret = uwb_rc_dev_addr_set(rc, &rc->uwb_dev.dev_addr);
+ if (ret)
+ goto out;
+out:
+ return ret;
+}
+EXPORT_SYMBOL_GPL(uwb_rc_post_reset);
diff --git a/drivers/uwb/rsv.c b/drivers/uwb/rsv.c
new file mode 100644
index 000000000..536ad42b0
--- /dev/null
+++ b/drivers/uwb/rsv.c
@@ -0,0 +1,1015 @@
+/*
+ * UWB reservation management.
+ *
+ * Copyright (C) 2008 Cambridge Silicon Radio Ltd.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+#include <linux/kernel.h>
+#include <linux/uwb.h>
+#include <linux/slab.h>
+#include <linux/random.h>
+#include <linux/export.h>
+
+#include "uwb-internal.h"
+
+static void uwb_rsv_timer(unsigned long arg);
+
+static const char *rsv_states[] = {
+ [UWB_RSV_STATE_NONE] = "none ",
+ [UWB_RSV_STATE_O_INITIATED] = "o initiated ",
+ [UWB_RSV_STATE_O_PENDING] = "o pending ",
+ [UWB_RSV_STATE_O_MODIFIED] = "o modified ",
+ [UWB_RSV_STATE_O_ESTABLISHED] = "o established ",
+ [UWB_RSV_STATE_O_TO_BE_MOVED] = "o to be moved ",
+ [UWB_RSV_STATE_O_MOVE_EXPANDING] = "o move expanding",
+ [UWB_RSV_STATE_O_MOVE_COMBINING] = "o move combining",
+ [UWB_RSV_STATE_O_MOVE_REDUCING] = "o move reducing ",
+ [UWB_RSV_STATE_T_ACCEPTED] = "t accepted ",
+ [UWB_RSV_STATE_T_CONFLICT] = "t conflict ",
+ [UWB_RSV_STATE_T_PENDING] = "t pending ",
+ [UWB_RSV_STATE_T_DENIED] = "t denied ",
+ [UWB_RSV_STATE_T_RESIZED] = "t resized ",
+ [UWB_RSV_STATE_T_EXPANDING_ACCEPTED] = "t expanding acc ",
+ [UWB_RSV_STATE_T_EXPANDING_CONFLICT] = "t expanding conf",
+ [UWB_RSV_STATE_T_EXPANDING_PENDING] = "t expanding pend",
+ [UWB_RSV_STATE_T_EXPANDING_DENIED] = "t expanding den ",
+};
+
+static const char *rsv_types[] = {
+ [UWB_DRP_TYPE_ALIEN_BP] = "alien-bp",
+ [UWB_DRP_TYPE_HARD] = "hard",
+ [UWB_DRP_TYPE_SOFT] = "soft",
+ [UWB_DRP_TYPE_PRIVATE] = "private",
+ [UWB_DRP_TYPE_PCA] = "pca",
+};
+
+bool uwb_rsv_has_two_drp_ies(struct uwb_rsv *rsv)
+{
+ static const bool has_two_drp_ies[] = {
+ [UWB_RSV_STATE_O_INITIATED] = false,
+ [UWB_RSV_STATE_O_PENDING] = false,
+ [UWB_RSV_STATE_O_MODIFIED] = false,
+ [UWB_RSV_STATE_O_ESTABLISHED] = false,
+ [UWB_RSV_STATE_O_TO_BE_MOVED] = false,
+ [UWB_RSV_STATE_O_MOVE_COMBINING] = false,
+ [UWB_RSV_STATE_O_MOVE_REDUCING] = false,
+ [UWB_RSV_STATE_O_MOVE_EXPANDING] = true,
+ [UWB_RSV_STATE_T_ACCEPTED] = false,
+ [UWB_RSV_STATE_T_CONFLICT] = false,
+ [UWB_RSV_STATE_T_PENDING] = false,
+ [UWB_RSV_STATE_T_DENIED] = false,
+ [UWB_RSV_STATE_T_RESIZED] = false,
+ [UWB_RSV_STATE_T_EXPANDING_ACCEPTED] = true,
+ [UWB_RSV_STATE_T_EXPANDING_CONFLICT] = true,
+ [UWB_RSV_STATE_T_EXPANDING_PENDING] = true,
+ [UWB_RSV_STATE_T_EXPANDING_DENIED] = true,
+ };
+
+ return has_two_drp_ies[rsv->state];
+}
+
+/**
+ * uwb_rsv_state_str - return a string for a reservation state
+ * @state: the reservation state.
+ */
+const char *uwb_rsv_state_str(enum uwb_rsv_state state)
+{
+ if (state < UWB_RSV_STATE_NONE || state >= UWB_RSV_STATE_LAST)
+ return "unknown";
+ return rsv_states[state];
+}
+EXPORT_SYMBOL_GPL(uwb_rsv_state_str);
+
+/**
+ * uwb_rsv_type_str - return a string for a reservation type
+ * @type: the reservation type
+ */
+const char *uwb_rsv_type_str(enum uwb_drp_type type)
+{
+ if (type < UWB_DRP_TYPE_ALIEN_BP || type > UWB_DRP_TYPE_PCA)
+ return "invalid";
+ return rsv_types[type];
+}
+EXPORT_SYMBOL_GPL(uwb_rsv_type_str);
+
+void uwb_rsv_dump(char *text, struct uwb_rsv *rsv)
+{
+ struct device *dev = &rsv->rc->uwb_dev.dev;
+ struct uwb_dev_addr devaddr;
+ char owner[UWB_ADDR_STRSIZE], target[UWB_ADDR_STRSIZE];
+
+ uwb_dev_addr_print(owner, sizeof(owner), &rsv->owner->dev_addr);
+ if (rsv->target.type == UWB_RSV_TARGET_DEV)
+ devaddr = rsv->target.dev->dev_addr;
+ else
+ devaddr = rsv->target.devaddr;
+ uwb_dev_addr_print(target, sizeof(target), &devaddr);
+
+ dev_dbg(dev, "rsv %s %s -> %s: %s\n",
+ text, owner, target, uwb_rsv_state_str(rsv->state));
+}
+
+static void uwb_rsv_release(struct kref *kref)
+{
+ struct uwb_rsv *rsv = container_of(kref, struct uwb_rsv, kref);
+
+ kfree(rsv);
+}
+
+void uwb_rsv_get(struct uwb_rsv *rsv)
+{
+ kref_get(&rsv->kref);
+}
+
+void uwb_rsv_put(struct uwb_rsv *rsv)
+{
+ kref_put(&rsv->kref, uwb_rsv_release);
+}
+
+/*
+ * Get a free stream index for a reservation.
+ *
+ * If the target is a DevAddr (e.g., a WUSB cluster reservation) then
+ * the stream is allocated from a pool of per-RC stream indexes,
+ * otherwise a unique stream index for the target is selected.
+ */
+static int uwb_rsv_get_stream(struct uwb_rsv *rsv)
+{
+ struct uwb_rc *rc = rsv->rc;
+ struct device *dev = &rc->uwb_dev.dev;
+ unsigned long *streams_bm;
+ int stream;
+
+ switch (rsv->target.type) {
+ case UWB_RSV_TARGET_DEV:
+ streams_bm = rsv->target.dev->streams;
+ break;
+ case UWB_RSV_TARGET_DEVADDR:
+ streams_bm = rc->uwb_dev.streams;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ stream = find_first_zero_bit(streams_bm, UWB_NUM_STREAMS);
+ if (stream >= UWB_NUM_STREAMS) {
+ dev_err(dev, "%s: no available stream found\n", __func__);
+ return -EBUSY;
+ }
+
+ rsv->stream = stream;
+ set_bit(stream, streams_bm);
+
+ dev_dbg(dev, "get stream %d\n", rsv->stream);
+
+ return 0;
+}
+
+static void uwb_rsv_put_stream(struct uwb_rsv *rsv)
+{
+ struct uwb_rc *rc = rsv->rc;
+ struct device *dev = &rc->uwb_dev.dev;
+ unsigned long *streams_bm;
+
+ switch (rsv->target.type) {
+ case UWB_RSV_TARGET_DEV:
+ streams_bm = rsv->target.dev->streams;
+ break;
+ case UWB_RSV_TARGET_DEVADDR:
+ streams_bm = rc->uwb_dev.streams;
+ break;
+ default:
+ return;
+ }
+
+ clear_bit(rsv->stream, streams_bm);
+
+ dev_dbg(dev, "put stream %d\n", rsv->stream);
+}
+
+void uwb_rsv_backoff_win_timer(unsigned long arg)
+{
+ struct uwb_drp_backoff_win *bow = (struct uwb_drp_backoff_win *)arg;
+ struct uwb_rc *rc = container_of(bow, struct uwb_rc, bow);
+ struct device *dev = &rc->uwb_dev.dev;
+
+ bow->can_reserve_extra_mases = true;
+ if (bow->total_expired <= 4) {
+ bow->total_expired++;
+ } else {
+ /* after 4 backoff window has expired we can exit from
+ * the backoff procedure */
+ bow->total_expired = 0;
+ bow->window = UWB_DRP_BACKOFF_WIN_MIN >> 1;
+ }
+ dev_dbg(dev, "backoff_win_timer total_expired=%d, n=%d\n", bow->total_expired, bow->n);
+
+ /* try to relocate all the "to be moved" relocations */
+ uwb_rsv_handle_drp_avail_change(rc);
+}
+
+void uwb_rsv_backoff_win_increment(struct uwb_rc *rc)
+{
+ struct uwb_drp_backoff_win *bow = &rc->bow;
+ struct device *dev = &rc->uwb_dev.dev;
+ unsigned timeout_us;
+
+ dev_dbg(dev, "backoff_win_increment: window=%d\n", bow->window);
+
+ bow->can_reserve_extra_mases = false;
+
+ if((bow->window << 1) == UWB_DRP_BACKOFF_WIN_MAX)
+ return;
+
+ bow->window <<= 1;
+ bow->n = prandom_u32() & (bow->window - 1);
+ dev_dbg(dev, "new_window=%d, n=%d\n", bow->window, bow->n);
+
+ /* reset the timer associated variables */
+ timeout_us = bow->n * UWB_SUPERFRAME_LENGTH_US;
+ bow->total_expired = 0;
+ mod_timer(&bow->timer, jiffies + usecs_to_jiffies(timeout_us));
+}
+
+static void uwb_rsv_stroke_timer(struct uwb_rsv *rsv)
+{
+ int sframes = UWB_MAX_LOST_BEACONS;
+
+ /*
+ * Multicast reservations can become established within 1
+ * super frame and should not be terminated if no response is
+ * received.
+ */
+ if (rsv->state == UWB_RSV_STATE_NONE) {
+ sframes = 0;
+ } else if (rsv->is_multicast) {
+ if (rsv->state == UWB_RSV_STATE_O_INITIATED
+ || rsv->state == UWB_RSV_STATE_O_MOVE_EXPANDING
+ || rsv->state == UWB_RSV_STATE_O_MOVE_COMBINING
+ || rsv->state == UWB_RSV_STATE_O_MOVE_REDUCING)
+ sframes = 1;
+ if (rsv->state == UWB_RSV_STATE_O_ESTABLISHED)
+ sframes = 0;
+
+ }
+
+ if (sframes > 0) {
+ /*
+ * Add an additional 2 superframes to account for the
+ * time to send the SET DRP IE command.
+ */
+ unsigned timeout_us = (sframes + 2) * UWB_SUPERFRAME_LENGTH_US;
+ mod_timer(&rsv->timer, jiffies + usecs_to_jiffies(timeout_us));
+ } else
+ del_timer(&rsv->timer);
+}
+
+/*
+ * Update a reservations state, and schedule an update of the
+ * transmitted DRP IEs.
+ */
+static void uwb_rsv_state_update(struct uwb_rsv *rsv,
+ enum uwb_rsv_state new_state)
+{
+ rsv->state = new_state;
+ rsv->ie_valid = false;
+
+ uwb_rsv_dump("SU", rsv);
+
+ uwb_rsv_stroke_timer(rsv);
+ uwb_rsv_sched_update(rsv->rc);
+}
+
+static void uwb_rsv_callback(struct uwb_rsv *rsv)
+{
+ if (rsv->callback)
+ rsv->callback(rsv);
+}
+
+void uwb_rsv_set_state(struct uwb_rsv *rsv, enum uwb_rsv_state new_state)
+{
+ struct uwb_rsv_move *mv = &rsv->mv;
+
+ if (rsv->state == new_state) {
+ switch (rsv->state) {
+ case UWB_RSV_STATE_O_ESTABLISHED:
+ case UWB_RSV_STATE_O_MOVE_EXPANDING:
+ case UWB_RSV_STATE_O_MOVE_COMBINING:
+ case UWB_RSV_STATE_O_MOVE_REDUCING:
+ case UWB_RSV_STATE_T_ACCEPTED:
+ case UWB_RSV_STATE_T_EXPANDING_ACCEPTED:
+ case UWB_RSV_STATE_T_RESIZED:
+ case UWB_RSV_STATE_NONE:
+ uwb_rsv_stroke_timer(rsv);
+ break;
+ default:
+ /* Expecting a state transition so leave timer
+ as-is. */
+ break;
+ }
+ return;
+ }
+
+ uwb_rsv_dump("SC", rsv);
+
+ switch (new_state) {
+ case UWB_RSV_STATE_NONE:
+ uwb_rsv_state_update(rsv, UWB_RSV_STATE_NONE);
+ uwb_rsv_remove(rsv);
+ uwb_rsv_callback(rsv);
+ break;
+ case UWB_RSV_STATE_O_INITIATED:
+ uwb_rsv_state_update(rsv, UWB_RSV_STATE_O_INITIATED);
+ break;
+ case UWB_RSV_STATE_O_PENDING:
+ uwb_rsv_state_update(rsv, UWB_RSV_STATE_O_PENDING);
+ break;
+ case UWB_RSV_STATE_O_MODIFIED:
+ /* in the companion there are the MASes to drop */
+ bitmap_andnot(rsv->mas.bm, rsv->mas.bm, mv->companion_mas.bm, UWB_NUM_MAS);
+ uwb_rsv_state_update(rsv, UWB_RSV_STATE_O_MODIFIED);
+ break;
+ case UWB_RSV_STATE_O_ESTABLISHED:
+ if (rsv->state == UWB_RSV_STATE_O_MODIFIED
+ || rsv->state == UWB_RSV_STATE_O_MOVE_REDUCING) {
+ uwb_drp_avail_release(rsv->rc, &mv->companion_mas);
+ rsv->needs_release_companion_mas = false;
+ }
+ uwb_drp_avail_reserve(rsv->rc, &rsv->mas);
+ uwb_rsv_state_update(rsv, UWB_RSV_STATE_O_ESTABLISHED);
+ uwb_rsv_callback(rsv);
+ break;
+ case UWB_RSV_STATE_O_MOVE_EXPANDING:
+ rsv->needs_release_companion_mas = true;
+ uwb_rsv_state_update(rsv, UWB_RSV_STATE_O_MOVE_EXPANDING);
+ break;
+ case UWB_RSV_STATE_O_MOVE_COMBINING:
+ rsv->needs_release_companion_mas = false;
+ uwb_drp_avail_reserve(rsv->rc, &mv->companion_mas);
+ bitmap_or(rsv->mas.bm, rsv->mas.bm, mv->companion_mas.bm, UWB_NUM_MAS);
+ rsv->mas.safe += mv->companion_mas.safe;
+ rsv->mas.unsafe += mv->companion_mas.unsafe;
+ uwb_rsv_state_update(rsv, UWB_RSV_STATE_O_MOVE_COMBINING);
+ break;
+ case UWB_RSV_STATE_O_MOVE_REDUCING:
+ bitmap_andnot(mv->companion_mas.bm, rsv->mas.bm, mv->final_mas.bm, UWB_NUM_MAS);
+ rsv->needs_release_companion_mas = true;
+ rsv->mas.safe = mv->final_mas.safe;
+ rsv->mas.unsafe = mv->final_mas.unsafe;
+ bitmap_copy(rsv->mas.bm, mv->final_mas.bm, UWB_NUM_MAS);
+ bitmap_copy(rsv->mas.unsafe_bm, mv->final_mas.unsafe_bm, UWB_NUM_MAS);
+ uwb_rsv_state_update(rsv, UWB_RSV_STATE_O_MOVE_REDUCING);
+ break;
+ case UWB_RSV_STATE_T_ACCEPTED:
+ case UWB_RSV_STATE_T_RESIZED:
+ rsv->needs_release_companion_mas = false;
+ uwb_drp_avail_reserve(rsv->rc, &rsv->mas);
+ uwb_rsv_state_update(rsv, UWB_RSV_STATE_T_ACCEPTED);
+ uwb_rsv_callback(rsv);
+ break;
+ case UWB_RSV_STATE_T_DENIED:
+ uwb_rsv_state_update(rsv, UWB_RSV_STATE_T_DENIED);
+ break;
+ case UWB_RSV_STATE_T_CONFLICT:
+ uwb_rsv_state_update(rsv, UWB_RSV_STATE_T_CONFLICT);
+ break;
+ case UWB_RSV_STATE_T_PENDING:
+ uwb_rsv_state_update(rsv, UWB_RSV_STATE_T_PENDING);
+ break;
+ case UWB_RSV_STATE_T_EXPANDING_ACCEPTED:
+ rsv->needs_release_companion_mas = true;
+ uwb_drp_avail_reserve(rsv->rc, &mv->companion_mas);
+ uwb_rsv_state_update(rsv, UWB_RSV_STATE_T_EXPANDING_ACCEPTED);
+ break;
+ default:
+ dev_err(&rsv->rc->uwb_dev.dev, "unhandled state: %s (%d)\n",
+ uwb_rsv_state_str(new_state), new_state);
+ }
+}
+
+static void uwb_rsv_handle_timeout_work(struct work_struct *work)
+{
+ struct uwb_rsv *rsv = container_of(work, struct uwb_rsv,
+ handle_timeout_work);
+ struct uwb_rc *rc = rsv->rc;
+
+ mutex_lock(&rc->rsvs_mutex);
+
+ uwb_rsv_dump("TO", rsv);
+
+ switch (rsv->state) {
+ case UWB_RSV_STATE_O_INITIATED:
+ if (rsv->is_multicast) {
+ uwb_rsv_set_state(rsv, UWB_RSV_STATE_O_ESTABLISHED);
+ goto unlock;
+ }
+ break;
+ case UWB_RSV_STATE_O_MOVE_EXPANDING:
+ if (rsv->is_multicast) {
+ uwb_rsv_set_state(rsv, UWB_RSV_STATE_O_MOVE_COMBINING);
+ goto unlock;
+ }
+ break;
+ case UWB_RSV_STATE_O_MOVE_COMBINING:
+ if (rsv->is_multicast) {
+ uwb_rsv_set_state(rsv, UWB_RSV_STATE_O_MOVE_REDUCING);
+ goto unlock;
+ }
+ break;
+ case UWB_RSV_STATE_O_MOVE_REDUCING:
+ if (rsv->is_multicast) {
+ uwb_rsv_set_state(rsv, UWB_RSV_STATE_O_ESTABLISHED);
+ goto unlock;
+ }
+ break;
+ case UWB_RSV_STATE_O_ESTABLISHED:
+ if (rsv->is_multicast)
+ goto unlock;
+ break;
+ case UWB_RSV_STATE_T_EXPANDING_ACCEPTED:
+ /*
+ * The time out could be for the main or of the
+ * companion DRP, assume it's for the companion and
+ * drop that first. A further time out is required to
+ * drop the main.
+ */
+ uwb_rsv_set_state(rsv, UWB_RSV_STATE_T_ACCEPTED);
+ uwb_drp_avail_release(rsv->rc, &rsv->mv.companion_mas);
+ goto unlock;
+ case UWB_RSV_STATE_NONE:
+ goto unlock;
+ default:
+ break;
+ }
+
+ uwb_rsv_remove(rsv);
+
+unlock:
+ mutex_unlock(&rc->rsvs_mutex);
+}
+
+static struct uwb_rsv *uwb_rsv_alloc(struct uwb_rc *rc)
+{
+ struct uwb_rsv *rsv;
+
+ rsv = kzalloc(sizeof(struct uwb_rsv), GFP_KERNEL);
+ if (!rsv)
+ return NULL;
+
+ INIT_LIST_HEAD(&rsv->rc_node);
+ INIT_LIST_HEAD(&rsv->pal_node);
+ kref_init(&rsv->kref);
+ init_timer(&rsv->timer);
+ rsv->timer.function = uwb_rsv_timer;
+ rsv->timer.data = (unsigned long)rsv;
+
+ rsv->rc = rc;
+ INIT_WORK(&rsv->handle_timeout_work, uwb_rsv_handle_timeout_work);
+
+ return rsv;
+}
+
+/**
+ * uwb_rsv_create - allocate and initialize a UWB reservation structure
+ * @rc: the radio controller
+ * @cb: callback to use when the reservation completes or terminates
+ * @pal_priv: data private to the PAL to be passed in the callback
+ *
+ * The callback is called when the state of the reservation changes from:
+ *
+ * - pending to accepted
+ * - pending to denined
+ * - accepted to terminated
+ * - pending to terminated
+ */
+struct uwb_rsv *uwb_rsv_create(struct uwb_rc *rc, uwb_rsv_cb_f cb, void *pal_priv)
+{
+ struct uwb_rsv *rsv;
+
+ rsv = uwb_rsv_alloc(rc);
+ if (!rsv)
+ return NULL;
+
+ rsv->callback = cb;
+ rsv->pal_priv = pal_priv;
+
+ return rsv;
+}
+EXPORT_SYMBOL_GPL(uwb_rsv_create);
+
+void uwb_rsv_remove(struct uwb_rsv *rsv)
+{
+ uwb_rsv_dump("RM", rsv);
+
+ if (rsv->state != UWB_RSV_STATE_NONE)
+ uwb_rsv_set_state(rsv, UWB_RSV_STATE_NONE);
+
+ if (rsv->needs_release_companion_mas)
+ uwb_drp_avail_release(rsv->rc, &rsv->mv.companion_mas);
+ uwb_drp_avail_release(rsv->rc, &rsv->mas);
+
+ if (uwb_rsv_is_owner(rsv))
+ uwb_rsv_put_stream(rsv);
+
+ uwb_dev_put(rsv->owner);
+ if (rsv->target.type == UWB_RSV_TARGET_DEV)
+ uwb_dev_put(rsv->target.dev);
+
+ list_del_init(&rsv->rc_node);
+ uwb_rsv_put(rsv);
+}
+
+/**
+ * uwb_rsv_destroy - free a UWB reservation structure
+ * @rsv: the reservation to free
+ *
+ * The reservation must already be terminated.
+ */
+void uwb_rsv_destroy(struct uwb_rsv *rsv)
+{
+ uwb_rsv_put(rsv);
+}
+EXPORT_SYMBOL_GPL(uwb_rsv_destroy);
+
+/**
+ * usb_rsv_establish - start a reservation establishment
+ * @rsv: the reservation
+ *
+ * The PAL should fill in @rsv's owner, target, type, max_mas,
+ * min_mas, max_interval and is_multicast fields. If the target is a
+ * uwb_dev it must be referenced.
+ *
+ * The reservation's callback will be called when the reservation is
+ * accepted, denied or times out.
+ */
+int uwb_rsv_establish(struct uwb_rsv *rsv)
+{
+ struct uwb_rc *rc = rsv->rc;
+ struct uwb_mas_bm available;
+ struct device *dev = &rc->uwb_dev.dev;
+ int ret;
+
+ mutex_lock(&rc->rsvs_mutex);
+ ret = uwb_rsv_get_stream(rsv);
+ if (ret) {
+ dev_err(dev, "%s: uwb_rsv_get_stream failed: %d\n",
+ __func__, ret);
+ goto out;
+ }
+
+ rsv->tiebreaker = prandom_u32() & 1;
+ /* get available mas bitmap */
+ uwb_drp_available(rc, &available);
+
+ ret = uwb_rsv_find_best_allocation(rsv, &available, &rsv->mas);
+ if (ret == UWB_RSV_ALLOC_NOT_FOUND) {
+ ret = -EBUSY;
+ uwb_rsv_put_stream(rsv);
+ dev_err(dev, "%s: uwb_rsv_find_best_allocation failed: %d\n",
+ __func__, ret);
+ goto out;
+ }
+
+ ret = uwb_drp_avail_reserve_pending(rc, &rsv->mas);
+ if (ret != 0) {
+ uwb_rsv_put_stream(rsv);
+ dev_err(dev, "%s: uwb_drp_avail_reserve_pending failed: %d\n",
+ __func__, ret);
+ goto out;
+ }
+
+ uwb_rsv_get(rsv);
+ list_add_tail(&rsv->rc_node, &rc->reservations);
+ rsv->owner = &rc->uwb_dev;
+ uwb_dev_get(rsv->owner);
+ uwb_rsv_set_state(rsv, UWB_RSV_STATE_O_INITIATED);
+out:
+ mutex_unlock(&rc->rsvs_mutex);
+ return ret;
+}
+EXPORT_SYMBOL_GPL(uwb_rsv_establish);
+
+/**
+ * uwb_rsv_modify - modify an already established reservation
+ * @rsv: the reservation to modify
+ * @max_mas: new maximum MAS to reserve
+ * @min_mas: new minimum MAS to reserve
+ * @max_interval: new max_interval to use
+ *
+ * FIXME: implement this once there are PALs that use it.
+ */
+int uwb_rsv_modify(struct uwb_rsv *rsv, int max_mas, int min_mas, int max_interval)
+{
+ return -ENOSYS;
+}
+EXPORT_SYMBOL_GPL(uwb_rsv_modify);
+
+/*
+ * move an already established reservation (rc->rsvs_mutex must to be
+ * taken when tis function is called)
+ */
+int uwb_rsv_try_move(struct uwb_rsv *rsv, struct uwb_mas_bm *available)
+{
+ struct uwb_rc *rc = rsv->rc;
+ struct uwb_drp_backoff_win *bow = &rc->bow;
+ struct device *dev = &rc->uwb_dev.dev;
+ struct uwb_rsv_move *mv;
+ int ret = 0;
+
+ if (bow->can_reserve_extra_mases == false)
+ return -EBUSY;
+
+ mv = &rsv->mv;
+
+ if (uwb_rsv_find_best_allocation(rsv, available, &mv->final_mas) == UWB_RSV_ALLOC_FOUND) {
+
+ if (!bitmap_equal(rsv->mas.bm, mv->final_mas.bm, UWB_NUM_MAS)) {
+ /* We want to move the reservation */
+ bitmap_andnot(mv->companion_mas.bm, mv->final_mas.bm, rsv->mas.bm, UWB_NUM_MAS);
+ uwb_drp_avail_reserve_pending(rc, &mv->companion_mas);
+ uwb_rsv_set_state(rsv, UWB_RSV_STATE_O_MOVE_EXPANDING);
+ }
+ } else {
+ dev_dbg(dev, "new allocation not found\n");
+ }
+
+ return ret;
+}
+
+/* It will try to move every reservation in state O_ESTABLISHED giving
+ * to the MAS allocator algorithm an availability that is the real one
+ * plus the allocation already established from the reservation. */
+void uwb_rsv_handle_drp_avail_change(struct uwb_rc *rc)
+{
+ struct uwb_drp_backoff_win *bow = &rc->bow;
+ struct uwb_rsv *rsv;
+ struct uwb_mas_bm mas;
+
+ if (bow->can_reserve_extra_mases == false)
+ return;
+
+ list_for_each_entry(rsv, &rc->reservations, rc_node) {
+ if (rsv->state == UWB_RSV_STATE_O_ESTABLISHED ||
+ rsv->state == UWB_RSV_STATE_O_TO_BE_MOVED) {
+ uwb_drp_available(rc, &mas);
+ bitmap_or(mas.bm, mas.bm, rsv->mas.bm, UWB_NUM_MAS);
+ uwb_rsv_try_move(rsv, &mas);
+ }
+ }
+
+}
+
+/**
+ * uwb_rsv_terminate - terminate an established reservation
+ * @rsv: the reservation to terminate
+ *
+ * A reservation is terminated by removing the DRP IE from the beacon,
+ * the other end will consider the reservation to be terminated when
+ * it does not see the DRP IE for at least mMaxLostBeacons.
+ *
+ * If applicable, the reference to the target uwb_dev will be released.
+ */
+void uwb_rsv_terminate(struct uwb_rsv *rsv)
+{
+ struct uwb_rc *rc = rsv->rc;
+
+ mutex_lock(&rc->rsvs_mutex);
+
+ if (rsv->state != UWB_RSV_STATE_NONE)
+ uwb_rsv_set_state(rsv, UWB_RSV_STATE_NONE);
+
+ mutex_unlock(&rc->rsvs_mutex);
+}
+EXPORT_SYMBOL_GPL(uwb_rsv_terminate);
+
+/**
+ * uwb_rsv_accept - accept a new reservation from a peer
+ * @rsv: the reservation
+ * @cb: call back for reservation changes
+ * @pal_priv: data to be passed in the above call back
+ *
+ * Reservation requests from peers are denied unless a PAL accepts it
+ * by calling this function.
+ *
+ * The PAL call uwb_rsv_destroy() for all accepted reservations before
+ * calling uwb_pal_unregister().
+ */
+void uwb_rsv_accept(struct uwb_rsv *rsv, uwb_rsv_cb_f cb, void *pal_priv)
+{
+ uwb_rsv_get(rsv);
+
+ rsv->callback = cb;
+ rsv->pal_priv = pal_priv;
+ rsv->state = UWB_RSV_STATE_T_ACCEPTED;
+}
+EXPORT_SYMBOL_GPL(uwb_rsv_accept);
+
+/*
+ * Is a received DRP IE for this reservation?
+ */
+static bool uwb_rsv_match(struct uwb_rsv *rsv, struct uwb_dev *src,
+ struct uwb_ie_drp *drp_ie)
+{
+ struct uwb_dev_addr *rsv_src;
+ int stream;
+
+ stream = uwb_ie_drp_stream_index(drp_ie);
+
+ if (rsv->stream != stream)
+ return false;
+
+ switch (rsv->target.type) {
+ case UWB_RSV_TARGET_DEVADDR:
+ return rsv->stream == stream;
+ case UWB_RSV_TARGET_DEV:
+ if (uwb_ie_drp_owner(drp_ie))
+ rsv_src = &rsv->owner->dev_addr;
+ else
+ rsv_src = &rsv->target.dev->dev_addr;
+ return uwb_dev_addr_cmp(&src->dev_addr, rsv_src) == 0;
+ }
+ return false;
+}
+
+static struct uwb_rsv *uwb_rsv_new_target(struct uwb_rc *rc,
+ struct uwb_dev *src,
+ struct uwb_ie_drp *drp_ie)
+{
+ struct uwb_rsv *rsv;
+ struct uwb_pal *pal;
+ enum uwb_rsv_state state;
+
+ rsv = uwb_rsv_alloc(rc);
+ if (!rsv)
+ return NULL;
+
+ rsv->rc = rc;
+ rsv->owner = src;
+ uwb_dev_get(rsv->owner);
+ rsv->target.type = UWB_RSV_TARGET_DEV;
+ rsv->target.dev = &rc->uwb_dev;
+ uwb_dev_get(&rc->uwb_dev);
+ rsv->type = uwb_ie_drp_type(drp_ie);
+ rsv->stream = uwb_ie_drp_stream_index(drp_ie);
+ uwb_drp_ie_to_bm(&rsv->mas, drp_ie);
+
+ /*
+ * See if any PALs are interested in this reservation. If not,
+ * deny the request.
+ */
+ rsv->state = UWB_RSV_STATE_T_DENIED;
+ mutex_lock(&rc->uwb_dev.mutex);
+ list_for_each_entry(pal, &rc->pals, node) {
+ if (pal->new_rsv)
+ pal->new_rsv(pal, rsv);
+ if (rsv->state == UWB_RSV_STATE_T_ACCEPTED)
+ break;
+ }
+ mutex_unlock(&rc->uwb_dev.mutex);
+
+ list_add_tail(&rsv->rc_node, &rc->reservations);
+ state = rsv->state;
+ rsv->state = UWB_RSV_STATE_NONE;
+
+ /* FIXME: do something sensible here */
+ if (state == UWB_RSV_STATE_T_ACCEPTED
+ && uwb_drp_avail_reserve_pending(rc, &rsv->mas) == -EBUSY) {
+ /* FIXME: do something sensible here */
+ } else {
+ uwb_rsv_set_state(rsv, state);
+ }
+
+ return rsv;
+}
+
+/**
+ * uwb_rsv_get_usable_mas - get the bitmap of the usable MAS of a reservations
+ * @rsv: the reservation.
+ * @mas: returns the available MAS.
+ *
+ * The usable MAS of a reservation may be less than the negotiated MAS
+ * if alien BPs are present.
+ */
+void uwb_rsv_get_usable_mas(struct uwb_rsv *rsv, struct uwb_mas_bm *mas)
+{
+ bitmap_zero(mas->bm, UWB_NUM_MAS);
+ bitmap_andnot(mas->bm, rsv->mas.bm, rsv->rc->cnflt_alien_bitmap.bm, UWB_NUM_MAS);
+}
+EXPORT_SYMBOL_GPL(uwb_rsv_get_usable_mas);
+
+/**
+ * uwb_rsv_find - find a reservation for a received DRP IE.
+ * @rc: the radio controller
+ * @src: source of the DRP IE
+ * @drp_ie: the DRP IE
+ *
+ * If the reservation cannot be found and the DRP IE is from a peer
+ * attempting to establish a new reservation, create a new reservation
+ * and add it to the list.
+ */
+struct uwb_rsv *uwb_rsv_find(struct uwb_rc *rc, struct uwb_dev *src,
+ struct uwb_ie_drp *drp_ie)
+{
+ struct uwb_rsv *rsv;
+
+ list_for_each_entry(rsv, &rc->reservations, rc_node) {
+ if (uwb_rsv_match(rsv, src, drp_ie))
+ return rsv;
+ }
+
+ if (uwb_ie_drp_owner(drp_ie))
+ return uwb_rsv_new_target(rc, src, drp_ie);
+
+ return NULL;
+}
+
+/*
+ * Go through all the reservations and check for timeouts and (if
+ * necessary) update their DRP IEs.
+ *
+ * FIXME: look at building the SET_DRP_IE command here rather than
+ * having to rescan the list in uwb_rc_send_all_drp_ie().
+ */
+static bool uwb_rsv_update_all(struct uwb_rc *rc)
+{
+ struct uwb_rsv *rsv, *t;
+ bool ie_updated = false;
+
+ list_for_each_entry_safe(rsv, t, &rc->reservations, rc_node) {
+ if (!rsv->ie_valid) {
+ uwb_drp_ie_update(rsv);
+ ie_updated = true;
+ }
+ }
+
+ return ie_updated;
+}
+
+void uwb_rsv_queue_update(struct uwb_rc *rc)
+{
+ unsigned long delay_us = UWB_MAS_LENGTH_US * UWB_MAS_PER_ZONE;
+
+ queue_delayed_work(rc->rsv_workq, &rc->rsv_update_work, usecs_to_jiffies(delay_us));
+}
+
+/**
+ * uwb_rsv_sched_update - schedule an update of the DRP IEs
+ * @rc: the radio controller.
+ *
+ * To improve performance and ensure correctness with [ECMA-368] the
+ * number of SET-DRP-IE commands that are done are limited.
+ *
+ * DRP IEs update come from two sources: DRP events from the hardware
+ * which all occur at the beginning of the superframe ('syncronous'
+ * events) and reservation establishment/termination requests from
+ * PALs or timers ('asynchronous' events).
+ *
+ * A delayed work ensures that all the synchronous events result in
+ * one SET-DRP-IE command.
+ *
+ * Additional logic (the set_drp_ie_pending and rsv_updated_postponed
+ * flags) will prevent an asynchrous event starting a SET-DRP-IE
+ * command if one is currently awaiting a response.
+ *
+ * FIXME: this does leave a window where an asynchrous event can delay
+ * the SET-DRP-IE for a synchronous event by one superframe.
+ */
+void uwb_rsv_sched_update(struct uwb_rc *rc)
+{
+ spin_lock_irq(&rc->rsvs_lock);
+ if (!delayed_work_pending(&rc->rsv_update_work)) {
+ if (rc->set_drp_ie_pending > 0) {
+ rc->set_drp_ie_pending++;
+ goto unlock;
+ }
+ uwb_rsv_queue_update(rc);
+ }
+unlock:
+ spin_unlock_irq(&rc->rsvs_lock);
+}
+
+/*
+ * Update DRP IEs and, if necessary, the DRP Availability IE and send
+ * the updated IEs to the radio controller.
+ */
+static void uwb_rsv_update_work(struct work_struct *work)
+{
+ struct uwb_rc *rc = container_of(work, struct uwb_rc,
+ rsv_update_work.work);
+ bool ie_updated;
+
+ mutex_lock(&rc->rsvs_mutex);
+
+ ie_updated = uwb_rsv_update_all(rc);
+
+ if (!rc->drp_avail.ie_valid) {
+ uwb_drp_avail_ie_update(rc);
+ ie_updated = true;
+ }
+
+ if (ie_updated && (rc->set_drp_ie_pending == 0))
+ uwb_rc_send_all_drp_ie(rc);
+
+ mutex_unlock(&rc->rsvs_mutex);
+}
+
+static void uwb_rsv_alien_bp_work(struct work_struct *work)
+{
+ struct uwb_rc *rc = container_of(work, struct uwb_rc,
+ rsv_alien_bp_work.work);
+ struct uwb_rsv *rsv;
+
+ mutex_lock(&rc->rsvs_mutex);
+
+ list_for_each_entry(rsv, &rc->reservations, rc_node) {
+ if (rsv->type != UWB_DRP_TYPE_ALIEN_BP) {
+ uwb_rsv_callback(rsv);
+ }
+ }
+
+ mutex_unlock(&rc->rsvs_mutex);
+}
+
+static void uwb_rsv_timer(unsigned long arg)
+{
+ struct uwb_rsv *rsv = (struct uwb_rsv *)arg;
+
+ queue_work(rsv->rc->rsv_workq, &rsv->handle_timeout_work);
+}
+
+/**
+ * uwb_rsv_remove_all - remove all reservations
+ * @rc: the radio controller
+ *
+ * A DRP IE update is not done.
+ */
+void uwb_rsv_remove_all(struct uwb_rc *rc)
+{
+ struct uwb_rsv *rsv, *t;
+
+ mutex_lock(&rc->rsvs_mutex);
+ list_for_each_entry_safe(rsv, t, &rc->reservations, rc_node) {
+ if (rsv->state != UWB_RSV_STATE_NONE)
+ uwb_rsv_set_state(rsv, UWB_RSV_STATE_NONE);
+ del_timer_sync(&rsv->timer);
+ }
+ /* Cancel any postponed update. */
+ rc->set_drp_ie_pending = 0;
+ mutex_unlock(&rc->rsvs_mutex);
+
+ cancel_delayed_work_sync(&rc->rsv_update_work);
+ flush_workqueue(rc->rsv_workq);
+
+ mutex_lock(&rc->rsvs_mutex);
+ list_for_each_entry_safe(rsv, t, &rc->reservations, rc_node) {
+ uwb_rsv_remove(rsv);
+ }
+ mutex_unlock(&rc->rsvs_mutex);
+}
+
+void uwb_rsv_init(struct uwb_rc *rc)
+{
+ INIT_LIST_HEAD(&rc->reservations);
+ INIT_LIST_HEAD(&rc->cnflt_alien_list);
+ mutex_init(&rc->rsvs_mutex);
+ spin_lock_init(&rc->rsvs_lock);
+ INIT_DELAYED_WORK(&rc->rsv_update_work, uwb_rsv_update_work);
+ INIT_DELAYED_WORK(&rc->rsv_alien_bp_work, uwb_rsv_alien_bp_work);
+ rc->bow.can_reserve_extra_mases = true;
+ rc->bow.total_expired = 0;
+ rc->bow.window = UWB_DRP_BACKOFF_WIN_MIN >> 1;
+ init_timer(&rc->bow.timer);
+ rc->bow.timer.function = uwb_rsv_backoff_win_timer;
+ rc->bow.timer.data = (unsigned long)&rc->bow;
+
+ bitmap_complement(rc->uwb_dev.streams, rc->uwb_dev.streams, UWB_NUM_STREAMS);
+}
+
+int uwb_rsv_setup(struct uwb_rc *rc)
+{
+ char name[16];
+
+ snprintf(name, sizeof(name), "%s_rsvd", dev_name(&rc->uwb_dev.dev));
+ rc->rsv_workq = create_singlethread_workqueue(name);
+ if (rc->rsv_workq == NULL)
+ return -ENOMEM;
+
+ return 0;
+}
+
+void uwb_rsv_cleanup(struct uwb_rc *rc)
+{
+ uwb_rsv_remove_all(rc);
+ destroy_workqueue(rc->rsv_workq);
+}
diff --git a/drivers/uwb/scan.c b/drivers/uwb/scan.c
new file mode 100644
index 000000000..cbb6a5e70
--- /dev/null
+++ b/drivers/uwb/scan.c
@@ -0,0 +1,135 @@
+/*
+ * Ultra Wide Band
+ * Scanning management
+ *
+ * Copyright (C) 2005-2006 Intel Corporation
+ * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ *
+ *
+ *
+ * FIXME: docs
+ * FIXME: there are issues here on how BEACON and SCAN on USB RCI deal
+ * with each other. Currently seems that START_BEACON while
+ * SCAN_ONLY will cancel the scan, so we need to update the
+ * state here. Clarification request sent by email on
+ * 10/05/2005.
+ * 10/28/2005 No clear answer heard--maybe we'll hack the API
+ * so that when we start beaconing, if the HC is
+ * scanning in a mode not compatible with beaconing
+ * we just fail.
+ */
+
+#include <linux/device.h>
+#include <linux/err.h>
+#include <linux/slab.h>
+#include <linux/stat.h>
+#include "uwb-internal.h"
+
+
+/**
+ * Start/stop scanning in a radio controller
+ *
+ * @rc: UWB Radio Controller
+ * @channel: Channel to scan; encodings in WUSB1.0[Table 5.12]
+ * @type: Type of scanning to do.
+ * @bpst_offset: value at which to start scanning (if type ==
+ * UWB_SCAN_ONLY_STARTTIME)
+ * @returns: 0 if ok, < 0 errno code on error
+ *
+ * We put the command on kmalloc'ed memory as some arches cannot do
+ * USB from the stack. The reply event is copied from an stage buffer,
+ * so it can be in the stack. See WUSB1.0[8.6.2.4] for more details.
+ */
+int uwb_rc_scan(struct uwb_rc *rc,
+ unsigned channel, enum uwb_scan_type type,
+ unsigned bpst_offset)
+{
+ int result;
+ struct uwb_rc_cmd_scan *cmd;
+ struct uwb_rc_evt_confirm reply;
+
+ result = -ENOMEM;
+ cmd = kzalloc(sizeof(*cmd), GFP_KERNEL);
+ if (cmd == NULL)
+ goto error_kzalloc;
+ mutex_lock(&rc->uwb_dev.mutex);
+ cmd->rccb.bCommandType = UWB_RC_CET_GENERAL;
+ cmd->rccb.wCommand = cpu_to_le16(UWB_RC_CMD_SCAN);
+ cmd->bChannelNumber = channel;
+ cmd->bScanState = type;
+ cmd->wStartTime = cpu_to_le16(bpst_offset);
+ reply.rceb.bEventType = UWB_RC_CET_GENERAL;
+ reply.rceb.wEvent = UWB_RC_CMD_SCAN;
+ result = uwb_rc_cmd(rc, "SCAN", &cmd->rccb, sizeof(*cmd),
+ &reply.rceb, sizeof(reply));
+ if (result < 0)
+ goto error_cmd;
+ if (reply.bResultCode != UWB_RC_RES_SUCCESS) {
+ dev_err(&rc->uwb_dev.dev,
+ "SCAN: command execution failed: %s (%d)\n",
+ uwb_rc_strerror(reply.bResultCode), reply.bResultCode);
+ result = -EIO;
+ goto error_cmd;
+ }
+ rc->scanning = channel;
+ rc->scan_type = type;
+error_cmd:
+ mutex_unlock(&rc->uwb_dev.mutex);
+ kfree(cmd);
+error_kzalloc:
+ return result;
+}
+
+/*
+ * Print scanning state
+ */
+static ssize_t uwb_rc_scan_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct uwb_dev *uwb_dev = to_uwb_dev(dev);
+ struct uwb_rc *rc = uwb_dev->rc;
+ ssize_t result;
+
+ mutex_lock(&rc->uwb_dev.mutex);
+ result = sprintf(buf, "%d %d\n", rc->scanning, rc->scan_type);
+ mutex_unlock(&rc->uwb_dev.mutex);
+ return result;
+}
+
+/*
+ *
+ */
+static ssize_t uwb_rc_scan_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t size)
+{
+ struct uwb_dev *uwb_dev = to_uwb_dev(dev);
+ struct uwb_rc *rc = uwb_dev->rc;
+ unsigned channel;
+ unsigned type;
+ unsigned bpst_offset = 0;
+ ssize_t result = -EINVAL;
+
+ result = sscanf(buf, "%u %u %u\n", &channel, &type, &bpst_offset);
+ if (result >= 2 && type < UWB_SCAN_TOP)
+ result = uwb_rc_scan(rc, channel, type, bpst_offset);
+
+ return result < 0 ? result : size;
+}
+
+/** Radio Control sysfs interface (declaration) */
+DEVICE_ATTR(scan, S_IRUGO | S_IWUSR, uwb_rc_scan_show, uwb_rc_scan_store);
diff --git a/drivers/uwb/umc-bus.c b/drivers/uwb/umc-bus.c
new file mode 100644
index 000000000..c85714051
--- /dev/null
+++ b/drivers/uwb/umc-bus.c
@@ -0,0 +1,212 @@
+/*
+ * Bus for UWB Multi-interface Controller capabilities.
+ *
+ * Copyright (C) 2007 Cambridge Silicon Radio Ltd.
+ *
+ * This file is released under the GNU GPL v2.
+ */
+#include <linux/kernel.h>
+#include <linux/sysfs.h>
+#include <linux/workqueue.h>
+#include <linux/module.h>
+#include <linux/uwb/umc.h>
+#include <linux/pci.h>
+
+static int umc_bus_pre_reset_helper(struct device *dev, void *data)
+{
+ int ret = 0;
+
+ if (dev->driver) {
+ struct umc_dev *umc = to_umc_dev(dev);
+ struct umc_driver *umc_drv = to_umc_driver(dev->driver);
+
+ if (umc_drv->pre_reset)
+ ret = umc_drv->pre_reset(umc);
+ else
+ device_release_driver(dev);
+ }
+ return ret;
+}
+
+static int umc_bus_post_reset_helper(struct device *dev, void *data)
+{
+ int ret = 0;
+
+ if (dev->driver) {
+ struct umc_dev *umc = to_umc_dev(dev);
+ struct umc_driver *umc_drv = to_umc_driver(dev->driver);
+
+ if (umc_drv->post_reset)
+ ret = umc_drv->post_reset(umc);
+ } else
+ ret = device_attach(dev);
+
+ return ret;
+}
+
+/**
+ * umc_controller_reset - reset the whole UMC controller
+ * @umc: the UMC device for the radio controller.
+ *
+ * Drivers or all capabilities of the controller will have their
+ * pre_reset methods called or be unbound from their device. Then all
+ * post_reset methods will be called or the drivers will be rebound.
+ *
+ * Radio controllers must provide pre_reset and post_reset methods and
+ * reset the hardware in their start method.
+ *
+ * If this is called while a probe() or remove() is in progress it
+ * will return -EAGAIN and not perform the reset.
+ */
+int umc_controller_reset(struct umc_dev *umc)
+{
+ struct device *parent = umc->dev.parent;
+ int ret = 0;
+
+ if (!device_trylock(parent))
+ return -EAGAIN;
+ ret = device_for_each_child(parent, parent, umc_bus_pre_reset_helper);
+ if (ret >= 0)
+ ret = device_for_each_child(parent, parent, umc_bus_post_reset_helper);
+ device_unlock(parent);
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(umc_controller_reset);
+
+/**
+ * umc_match_pci_id - match a UMC driver to a UMC device's parent PCI device.
+ * @umc_drv: umc driver with match_data pointing to a zero-terminated
+ * table of pci_device_id's.
+ * @umc: umc device whose parent is to be matched.
+ */
+int umc_match_pci_id(struct umc_driver *umc_drv, struct umc_dev *umc)
+{
+ const struct pci_device_id *id_table = umc_drv->match_data;
+ struct pci_dev *pci;
+
+ if (!dev_is_pci(umc->dev.parent))
+ return 0;
+
+ pci = to_pci_dev(umc->dev.parent);
+ return pci_match_id(id_table, pci) != NULL;
+}
+EXPORT_SYMBOL_GPL(umc_match_pci_id);
+
+static int umc_bus_rescan_helper(struct device *dev, void *data)
+{
+ int ret = 0;
+
+ if (!dev->driver)
+ ret = device_attach(dev);
+
+ return ret;
+}
+
+static void umc_bus_rescan(struct device *parent)
+{
+ int err;
+
+ /*
+ * We can't use bus_rescan_devices() here as it deadlocks when
+ * it tries to retake the dev->parent semaphore.
+ */
+ err = device_for_each_child(parent, NULL, umc_bus_rescan_helper);
+ if (err < 0)
+ printk(KERN_WARNING "%s: rescan of bus failed: %d\n",
+ KBUILD_MODNAME, err);
+}
+
+static int umc_bus_match(struct device *dev, struct device_driver *drv)
+{
+ struct umc_dev *umc = to_umc_dev(dev);
+ struct umc_driver *umc_driver = to_umc_driver(drv);
+
+ if (umc->cap_id == umc_driver->cap_id) {
+ if (umc_driver->match)
+ return umc_driver->match(umc_driver, umc);
+ else
+ return 1;
+ }
+ return 0;
+}
+
+static int umc_device_probe(struct device *dev)
+{
+ struct umc_dev *umc;
+ struct umc_driver *umc_driver;
+ int err;
+
+ umc_driver = to_umc_driver(dev->driver);
+ umc = to_umc_dev(dev);
+
+ get_device(dev);
+ err = umc_driver->probe(umc);
+ if (err)
+ put_device(dev);
+ else
+ umc_bus_rescan(dev->parent);
+
+ return err;
+}
+
+static int umc_device_remove(struct device *dev)
+{
+ struct umc_dev *umc;
+ struct umc_driver *umc_driver;
+
+ umc_driver = to_umc_driver(dev->driver);
+ umc = to_umc_dev(dev);
+
+ umc_driver->remove(umc);
+ put_device(dev);
+ return 0;
+}
+
+static ssize_t capability_id_show(struct device *dev, struct device_attribute *attr, char *buf)
+{
+ struct umc_dev *umc = to_umc_dev(dev);
+
+ return sprintf(buf, "0x%02x\n", umc->cap_id);
+}
+static DEVICE_ATTR_RO(capability_id);
+
+static ssize_t version_show(struct device *dev, struct device_attribute *attr, char *buf)
+{
+ struct umc_dev *umc = to_umc_dev(dev);
+
+ return sprintf(buf, "0x%04x\n", umc->version);
+}
+static DEVICE_ATTR_RO(version);
+
+static struct attribute *umc_dev_attrs[] = {
+ &dev_attr_capability_id.attr,
+ &dev_attr_version.attr,
+ NULL,
+};
+ATTRIBUTE_GROUPS(umc_dev);
+
+struct bus_type umc_bus_type = {
+ .name = "umc",
+ .match = umc_bus_match,
+ .probe = umc_device_probe,
+ .remove = umc_device_remove,
+ .dev_groups = umc_dev_groups,
+};
+EXPORT_SYMBOL_GPL(umc_bus_type);
+
+static int __init umc_bus_init(void)
+{
+ return bus_register(&umc_bus_type);
+}
+module_init(umc_bus_init);
+
+static void __exit umc_bus_exit(void)
+{
+ bus_unregister(&umc_bus_type);
+}
+module_exit(umc_bus_exit);
+
+MODULE_DESCRIPTION("UWB Multi-interface Controller capability bus");
+MODULE_AUTHOR("Cambridge Silicon Radio Ltd.");
+MODULE_LICENSE("GPL");
diff --git a/drivers/uwb/umc-dev.c b/drivers/uwb/umc-dev.c
new file mode 100644
index 000000000..7b0b268e0
--- /dev/null
+++ b/drivers/uwb/umc-dev.c
@@ -0,0 +1,95 @@
+/*
+ * UWB Multi-interface Controller device management.
+ *
+ * Copyright (C) 2007 Cambridge Silicon Radio Ltd.
+ *
+ * This file is released under the GNU GPL v2.
+ */
+#include <linux/kernel.h>
+#include <linux/export.h>
+#include <linux/slab.h>
+#include <linux/uwb/umc.h>
+
+static void umc_device_release(struct device *dev)
+{
+ struct umc_dev *umc = to_umc_dev(dev);
+
+ kfree(umc);
+}
+
+/**
+ * umc_device_create - allocate a child UMC device
+ * @parent: parent of the new UMC device.
+ * @n: index of the new device.
+ *
+ * The new UMC device will have a bus ID of the parent with '-n'
+ * appended.
+ */
+struct umc_dev *umc_device_create(struct device *parent, int n)
+{
+ struct umc_dev *umc;
+
+ umc = kzalloc(sizeof(struct umc_dev), GFP_KERNEL);
+ if (umc) {
+ dev_set_name(&umc->dev, "%s-%d", dev_name(parent), n);
+ umc->dev.parent = parent;
+ umc->dev.bus = &umc_bus_type;
+ umc->dev.release = umc_device_release;
+
+ umc->dev.dma_mask = parent->dma_mask;
+ }
+ return umc;
+}
+EXPORT_SYMBOL_GPL(umc_device_create);
+
+/**
+ * umc_device_register - register a UMC device
+ * @umc: pointer to the UMC device
+ *
+ * The memory resource for the UMC device is acquired and the device
+ * registered with the system.
+ */
+int umc_device_register(struct umc_dev *umc)
+{
+ int err;
+
+ err = request_resource(umc->resource.parent, &umc->resource);
+ if (err < 0) {
+ dev_err(&umc->dev, "can't allocate resource range %pR: %d\n",
+ &umc->resource, err);
+ goto error_request_resource;
+ }
+
+ err = device_register(&umc->dev);
+ if (err < 0)
+ goto error_device_register;
+ return 0;
+
+error_device_register:
+ put_device(&umc->dev);
+ release_resource(&umc->resource);
+error_request_resource:
+ return err;
+}
+EXPORT_SYMBOL_GPL(umc_device_register);
+
+/**
+ * umc_device_unregister - unregister a UMC device
+ * @umc: pointer to the UMC device
+ *
+ * First we unregister the device, make sure the driver can do it's
+ * resource release thing and then we try to release any left over
+ * resources. We take a ref to the device, to make sure it doesn't
+ * disappear under our feet.
+ */
+void umc_device_unregister(struct umc_dev *umc)
+{
+ struct device *dev;
+ if (!umc)
+ return;
+ dev = get_device(&umc->dev);
+ device_unregister(&umc->dev);
+ release_resource(&umc->resource);
+ put_device(dev);
+}
+EXPORT_SYMBOL_GPL(umc_device_unregister);
diff --git a/drivers/uwb/umc-drv.c b/drivers/uwb/umc-drv.c
new file mode 100644
index 000000000..26d0ae181
--- /dev/null
+++ b/drivers/uwb/umc-drv.c
@@ -0,0 +1,32 @@
+/*
+ * UWB Multi-interface Controller driver management.
+ *
+ * Copyright (C) 2007 Cambridge Silicon Radio Ltd.
+ *
+ * This file is released under the GNU GPL v2.
+ */
+#include <linux/kernel.h>
+#include <linux/export.h>
+#include <linux/uwb/umc.h>
+
+int __umc_driver_register(struct umc_driver *umc_drv, struct module *module,
+ const char *mod_name)
+{
+ umc_drv->driver.name = umc_drv->name;
+ umc_drv->driver.owner = module;
+ umc_drv->driver.mod_name = mod_name;
+ umc_drv->driver.bus = &umc_bus_type;
+
+ return driver_register(&umc_drv->driver);
+}
+EXPORT_SYMBOL_GPL(__umc_driver_register);
+
+/**
+ * umc_driver_register - unregister a UMC capabiltity driver.
+ * @umc_drv: pointer to the driver.
+ */
+void umc_driver_unregister(struct umc_driver *umc_drv)
+{
+ driver_unregister(&umc_drv->driver);
+}
+EXPORT_SYMBOL_GPL(umc_driver_unregister);
diff --git a/drivers/uwb/uwb-debug.c b/drivers/uwb/uwb-debug.c
new file mode 100644
index 000000000..0b1e5a944
--- /dev/null
+++ b/drivers/uwb/uwb-debug.c
@@ -0,0 +1,393 @@
+/*
+ * Ultra Wide Band
+ * Debug support
+ *
+ * Copyright (C) 2005-2006 Intel Corporation
+ * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
+ * Copyright (C) 2008 Cambridge Silicon Radio Ltd.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ *
+ *
+ * FIXME: doc
+ */
+
+#include <linux/spinlock.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/notifier.h>
+#include <linux/device.h>
+#include <linux/debugfs.h>
+#include <linux/uaccess.h>
+#include <linux/seq_file.h>
+
+#include <linux/uwb/debug-cmd.h>
+
+#include "uwb-internal.h"
+
+/*
+ * Debug interface
+ *
+ * Per radio controller debugfs files (in uwb/uwbN/):
+ *
+ * command: Flexible command interface (see <linux/uwb/debug-cmd.h>).
+ *
+ * reservations: information on reservations.
+ *
+ * accept: Set to true (Y or 1) to accept reservation requests from
+ * peers.
+ *
+ * drp_avail: DRP availability information.
+ */
+
+struct uwb_dbg {
+ struct uwb_pal pal;
+
+ u32 accept;
+ struct list_head rsvs;
+
+ struct dentry *root_d;
+ struct dentry *command_f;
+ struct dentry *reservations_f;
+ struct dentry *accept_f;
+ struct dentry *drp_avail_f;
+ spinlock_t list_lock;
+};
+
+static struct dentry *root_dir;
+
+static void uwb_dbg_rsv_cb(struct uwb_rsv *rsv)
+{
+ struct uwb_dbg *dbg = rsv->pal_priv;
+
+ uwb_rsv_dump("debug", rsv);
+
+ if (rsv->state == UWB_RSV_STATE_NONE) {
+ spin_lock(&dbg->list_lock);
+ list_del(&rsv->pal_node);
+ spin_unlock(&dbg->list_lock);
+ uwb_rsv_destroy(rsv);
+ }
+}
+
+static int cmd_rsv_establish(struct uwb_rc *rc,
+ struct uwb_dbg_cmd_rsv_establish *cmd)
+{
+ struct uwb_mac_addr macaddr;
+ struct uwb_rsv *rsv;
+ struct uwb_dev *target;
+ int ret;
+
+ memcpy(&macaddr, cmd->target, sizeof(macaddr));
+ target = uwb_dev_get_by_macaddr(rc, &macaddr);
+ if (target == NULL)
+ return -ENODEV;
+
+ rsv = uwb_rsv_create(rc, uwb_dbg_rsv_cb, rc->dbg);
+ if (rsv == NULL) {
+ uwb_dev_put(target);
+ return -ENOMEM;
+ }
+
+ rsv->target.type = UWB_RSV_TARGET_DEV;
+ rsv->target.dev = target;
+ rsv->type = cmd->type;
+ rsv->max_mas = cmd->max_mas;
+ rsv->min_mas = cmd->min_mas;
+ rsv->max_interval = cmd->max_interval;
+
+ ret = uwb_rsv_establish(rsv);
+ if (ret)
+ uwb_rsv_destroy(rsv);
+ else {
+ spin_lock(&(rc->dbg)->list_lock);
+ list_add_tail(&rsv->pal_node, &rc->dbg->rsvs);
+ spin_unlock(&(rc->dbg)->list_lock);
+ }
+ return ret;
+}
+
+static int cmd_rsv_terminate(struct uwb_rc *rc,
+ struct uwb_dbg_cmd_rsv_terminate *cmd)
+{
+ struct uwb_rsv *rsv, *found = NULL;
+ int i = 0;
+
+ spin_lock(&(rc->dbg)->list_lock);
+
+ list_for_each_entry(rsv, &rc->dbg->rsvs, pal_node) {
+ if (i == cmd->index) {
+ found = rsv;
+ uwb_rsv_get(found);
+ break;
+ }
+ i++;
+ }
+
+ spin_unlock(&(rc->dbg)->list_lock);
+
+ if (!found)
+ return -EINVAL;
+
+ uwb_rsv_terminate(found);
+ uwb_rsv_put(found);
+
+ return 0;
+}
+
+static int cmd_ie_add(struct uwb_rc *rc, struct uwb_dbg_cmd_ie *ie_to_add)
+{
+ return uwb_rc_ie_add(rc,
+ (const struct uwb_ie_hdr *) ie_to_add->data,
+ ie_to_add->len);
+}
+
+static int cmd_ie_rm(struct uwb_rc *rc, struct uwb_dbg_cmd_ie *ie_to_rm)
+{
+ return uwb_rc_ie_rm(rc, ie_to_rm->data[0]);
+}
+
+static ssize_t command_write(struct file *file, const char __user *buf,
+ size_t len, loff_t *off)
+{
+ struct uwb_rc *rc = file->private_data;
+ struct uwb_dbg_cmd cmd;
+ int ret = 0;
+
+ if (len != sizeof(struct uwb_dbg_cmd))
+ return -EINVAL;
+
+ if (copy_from_user(&cmd, buf, len) != 0)
+ return -EFAULT;
+
+ switch (cmd.type) {
+ case UWB_DBG_CMD_RSV_ESTABLISH:
+ ret = cmd_rsv_establish(rc, &cmd.rsv_establish);
+ break;
+ case UWB_DBG_CMD_RSV_TERMINATE:
+ ret = cmd_rsv_terminate(rc, &cmd.rsv_terminate);
+ break;
+ case UWB_DBG_CMD_IE_ADD:
+ ret = cmd_ie_add(rc, &cmd.ie_add);
+ break;
+ case UWB_DBG_CMD_IE_RM:
+ ret = cmd_ie_rm(rc, &cmd.ie_rm);
+ break;
+ case UWB_DBG_CMD_RADIO_START:
+ ret = uwb_radio_start(&rc->dbg->pal);
+ break;
+ case UWB_DBG_CMD_RADIO_STOP:
+ uwb_radio_stop(&rc->dbg->pal);
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return ret < 0 ? ret : len;
+}
+
+static const struct file_operations command_fops = {
+ .open = simple_open,
+ .write = command_write,
+ .read = NULL,
+ .llseek = no_llseek,
+ .owner = THIS_MODULE,
+};
+
+static int reservations_print(struct seq_file *s, void *p)
+{
+ struct uwb_rc *rc = s->private;
+ struct uwb_rsv *rsv;
+
+ mutex_lock(&rc->rsvs_mutex);
+
+ list_for_each_entry(rsv, &rc->reservations, rc_node) {
+ struct uwb_dev_addr devaddr;
+ char owner[UWB_ADDR_STRSIZE], target[UWB_ADDR_STRSIZE];
+ bool is_owner;
+
+ uwb_dev_addr_print(owner, sizeof(owner), &rsv->owner->dev_addr);
+ if (rsv->target.type == UWB_RSV_TARGET_DEV) {
+ devaddr = rsv->target.dev->dev_addr;
+ is_owner = &rc->uwb_dev == rsv->owner;
+ } else {
+ devaddr = rsv->target.devaddr;
+ is_owner = true;
+ }
+ uwb_dev_addr_print(target, sizeof(target), &devaddr);
+
+ seq_printf(s, "%c %s -> %s: %s\n",
+ is_owner ? 'O' : 'T',
+ owner, target, uwb_rsv_state_str(rsv->state));
+ seq_printf(s, " stream: %d type: %s\n",
+ rsv->stream, uwb_rsv_type_str(rsv->type));
+ seq_printf(s, " %*pb\n", UWB_NUM_MAS, rsv->mas.bm);
+ }
+
+ mutex_unlock(&rc->rsvs_mutex);
+
+ return 0;
+}
+
+static int reservations_open(struct inode *inode, struct file *file)
+{
+ return single_open(file, reservations_print, inode->i_private);
+}
+
+static const struct file_operations reservations_fops = {
+ .open = reservations_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = single_release,
+ .owner = THIS_MODULE,
+};
+
+static int drp_avail_print(struct seq_file *s, void *p)
+{
+ struct uwb_rc *rc = s->private;
+
+ seq_printf(s, "global: %*pb\n", UWB_NUM_MAS, rc->drp_avail.global);
+ seq_printf(s, "local: %*pb\n", UWB_NUM_MAS, rc->drp_avail.local);
+ seq_printf(s, "pending: %*pb\n", UWB_NUM_MAS, rc->drp_avail.pending);
+
+ return 0;
+}
+
+static int drp_avail_open(struct inode *inode, struct file *file)
+{
+ return single_open(file, drp_avail_print, inode->i_private);
+}
+
+static const struct file_operations drp_avail_fops = {
+ .open = drp_avail_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = single_release,
+ .owner = THIS_MODULE,
+};
+
+static void uwb_dbg_channel_changed(struct uwb_pal *pal, int channel)
+{
+ struct device *dev = &pal->rc->uwb_dev.dev;
+
+ if (channel > 0)
+ dev_info(dev, "debug: channel %d started\n", channel);
+ else
+ dev_info(dev, "debug: channel stopped\n");
+}
+
+static void uwb_dbg_new_rsv(struct uwb_pal *pal, struct uwb_rsv *rsv)
+{
+ struct uwb_dbg *dbg = container_of(pal, struct uwb_dbg, pal);
+
+ if (dbg->accept) {
+ spin_lock(&dbg->list_lock);
+ list_add_tail(&rsv->pal_node, &dbg->rsvs);
+ spin_unlock(&dbg->list_lock);
+ uwb_rsv_accept(rsv, uwb_dbg_rsv_cb, dbg);
+ }
+}
+
+/**
+ * uwb_dbg_add_rc - add a debug interface for a radio controller
+ * @rc: the radio controller
+ */
+void uwb_dbg_add_rc(struct uwb_rc *rc)
+{
+ rc->dbg = kzalloc(sizeof(struct uwb_dbg), GFP_KERNEL);
+ if (rc->dbg == NULL)
+ return;
+
+ INIT_LIST_HEAD(&rc->dbg->rsvs);
+ spin_lock_init(&(rc->dbg)->list_lock);
+
+ uwb_pal_init(&rc->dbg->pal);
+ rc->dbg->pal.rc = rc;
+ rc->dbg->pal.channel_changed = uwb_dbg_channel_changed;
+ rc->dbg->pal.new_rsv = uwb_dbg_new_rsv;
+ uwb_pal_register(&rc->dbg->pal);
+
+ if (root_dir) {
+ rc->dbg->root_d = debugfs_create_dir(dev_name(&rc->uwb_dev.dev),
+ root_dir);
+ rc->dbg->command_f = debugfs_create_file("command", 0200,
+ rc->dbg->root_d, rc,
+ &command_fops);
+ rc->dbg->reservations_f = debugfs_create_file("reservations", 0444,
+ rc->dbg->root_d, rc,
+ &reservations_fops);
+ rc->dbg->accept_f = debugfs_create_bool("accept", 0644,
+ rc->dbg->root_d,
+ &rc->dbg->accept);
+ rc->dbg->drp_avail_f = debugfs_create_file("drp_avail", 0444,
+ rc->dbg->root_d, rc,
+ &drp_avail_fops);
+ }
+}
+
+/**
+ * uwb_dbg_del_rc - remove a radio controller's debug interface
+ * @rc: the radio controller
+ */
+void uwb_dbg_del_rc(struct uwb_rc *rc)
+{
+ struct uwb_rsv *rsv, *t;
+
+ if (rc->dbg == NULL)
+ return;
+
+ list_for_each_entry_safe(rsv, t, &rc->dbg->rsvs, pal_node) {
+ uwb_rsv_terminate(rsv);
+ }
+
+ uwb_pal_unregister(&rc->dbg->pal);
+
+ if (root_dir) {
+ debugfs_remove(rc->dbg->drp_avail_f);
+ debugfs_remove(rc->dbg->accept_f);
+ debugfs_remove(rc->dbg->reservations_f);
+ debugfs_remove(rc->dbg->command_f);
+ debugfs_remove(rc->dbg->root_d);
+ }
+}
+
+/**
+ * uwb_dbg_exit - initialize the debug interface sub-module
+ */
+void uwb_dbg_init(void)
+{
+ root_dir = debugfs_create_dir("uwb", NULL);
+}
+
+/**
+ * uwb_dbg_exit - clean-up the debug interface sub-module
+ */
+void uwb_dbg_exit(void)
+{
+ debugfs_remove(root_dir);
+}
+
+/**
+ * uwb_dbg_create_pal_dir - create a debugfs directory for a PAL
+ * @pal: The PAL.
+ */
+struct dentry *uwb_dbg_create_pal_dir(struct uwb_pal *pal)
+{
+ struct uwb_rc *rc = pal->rc;
+
+ if (root_dir && rc->dbg && rc->dbg->root_d && pal->name)
+ return debugfs_create_dir(pal->name, rc->dbg->root_d);
+ return NULL;
+}
diff --git a/drivers/uwb/uwb-internal.h b/drivers/uwb/uwb-internal.h
new file mode 100644
index 000000000..353c0555a
--- /dev/null
+++ b/drivers/uwb/uwb-internal.h
@@ -0,0 +1,379 @@
+/*
+ * Ultra Wide Band
+ * UWB internal API
+ *
+ * Copyright (C) 2005-2006 Intel Corporation
+ * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ *
+ * This contains most of the internal API for UWB. This is stuff used
+ * across the stack that of course, is of no interest to the rest.
+ *
+ * Some parts might end up going public (like uwb_rc_*())...
+ */
+
+#ifndef __UWB_INTERNAL_H__
+#define __UWB_INTERNAL_H__
+
+#include <linux/kernel.h>
+#include <linux/device.h>
+#include <linux/uwb.h>
+#include <linux/mutex.h>
+
+struct uwb_beca_e;
+
+/* General device API */
+extern void uwb_dev_init(struct uwb_dev *uwb_dev);
+extern int __uwb_dev_offair(struct uwb_dev *, struct uwb_rc *);
+extern int uwb_dev_add(struct uwb_dev *uwb_dev, struct device *parent_dev,
+ struct uwb_rc *parent_rc);
+extern void uwb_dev_rm(struct uwb_dev *uwb_dev);
+extern void uwbd_dev_onair(struct uwb_rc *, struct uwb_beca_e *);
+extern void uwbd_dev_offair(struct uwb_beca_e *);
+void uwb_notify(struct uwb_rc *rc, struct uwb_dev *uwb_dev, enum uwb_notifs event);
+
+/* General UWB Radio Controller Internal API */
+extern struct uwb_rc *__uwb_rc_try_get(struct uwb_rc *);
+static inline struct uwb_rc *__uwb_rc_get(struct uwb_rc *rc)
+{
+ uwb_dev_get(&rc->uwb_dev);
+ return rc;
+}
+
+static inline void __uwb_rc_put(struct uwb_rc *rc)
+{
+ if (rc)
+ uwb_dev_put(&rc->uwb_dev);
+}
+
+extern int uwb_rc_reset(struct uwb_rc *rc);
+extern int uwb_rc_beacon(struct uwb_rc *rc,
+ int channel, unsigned bpst_offset);
+extern int uwb_rc_scan(struct uwb_rc *rc,
+ unsigned channel, enum uwb_scan_type type,
+ unsigned bpst_offset);
+extern int uwb_rc_send_all_drp_ie(struct uwb_rc *rc);
+
+void uwb_rc_ie_init(struct uwb_rc *);
+int uwb_rc_ie_setup(struct uwb_rc *);
+void uwb_rc_ie_release(struct uwb_rc *);
+int uwb_ie_dump_hex(const struct uwb_ie_hdr *ies, size_t len,
+ char *buf, size_t size);
+int uwb_rc_set_ie(struct uwb_rc *, struct uwb_rc_cmd_set_ie *);
+
+
+extern const char *uwb_rc_strerror(unsigned code);
+
+/*
+ * Time to wait for a response to an RC command.
+ *
+ * Some commands can take a long time to response. e.g., START_BEACON
+ * may scan for several superframes before joining an existing beacon
+ * group and this can take around 600 ms.
+ */
+#define UWB_RC_CMD_TIMEOUT_MS 1000 /* ms */
+
+/*
+ * Notification/Event Handlers
+ */
+
+struct uwb_rc_neh;
+
+extern int uwb_rc_cmd_async(struct uwb_rc *rc, const char *cmd_name,
+ struct uwb_rccb *cmd, size_t cmd_size,
+ u8 expected_type, u16 expected_event,
+ uwb_rc_cmd_cb_f cb, void *arg);
+
+
+void uwb_rc_neh_create(struct uwb_rc *rc);
+void uwb_rc_neh_destroy(struct uwb_rc *rc);
+
+struct uwb_rc_neh *uwb_rc_neh_add(struct uwb_rc *rc, struct uwb_rccb *cmd,
+ u8 expected_type, u16 expected_event,
+ uwb_rc_cmd_cb_f cb, void *arg);
+void uwb_rc_neh_rm(struct uwb_rc *rc, struct uwb_rc_neh *neh);
+void uwb_rc_neh_arm(struct uwb_rc *rc, struct uwb_rc_neh *neh);
+void uwb_rc_neh_put(struct uwb_rc_neh *neh);
+
+/* Event size tables */
+extern int uwb_est_create(void);
+extern void uwb_est_destroy(void);
+
+/*
+ * UWB conflicting alien reservations
+ */
+struct uwb_cnflt_alien {
+ struct uwb_rc *rc;
+ struct list_head rc_node;
+ struct uwb_mas_bm mas;
+ struct timer_list timer;
+ struct work_struct cnflt_update_work;
+};
+
+enum uwb_uwb_rsv_alloc_result {
+ UWB_RSV_ALLOC_FOUND = 0,
+ UWB_RSV_ALLOC_NOT_FOUND,
+};
+
+enum uwb_rsv_mas_status {
+ UWB_RSV_MAS_NOT_AVAIL = 1,
+ UWB_RSV_MAS_SAFE,
+ UWB_RSV_MAS_UNSAFE,
+};
+
+struct uwb_rsv_col_set_info {
+ unsigned char start_col;
+ unsigned char interval;
+ unsigned char safe_mas_per_col;
+ unsigned char unsafe_mas_per_col;
+};
+
+struct uwb_rsv_col_info {
+ unsigned char max_avail_safe;
+ unsigned char max_avail_unsafe;
+ unsigned char highest_mas[UWB_MAS_PER_ZONE];
+ struct uwb_rsv_col_set_info csi;
+};
+
+struct uwb_rsv_row_info {
+ unsigned char avail[UWB_MAS_PER_ZONE];
+ unsigned char free_rows;
+ unsigned char used_rows;
+};
+
+/*
+ * UWB find allocation
+ */
+struct uwb_rsv_alloc_info {
+ unsigned char bm[UWB_MAS_PER_ZONE * UWB_NUM_ZONES];
+ struct uwb_rsv_col_info ci[UWB_NUM_ZONES];
+ struct uwb_rsv_row_info ri;
+ struct uwb_mas_bm *not_available;
+ struct uwb_mas_bm *result;
+ int min_mas;
+ int max_mas;
+ int max_interval;
+ int total_allocated_mases;
+ int safe_allocated_mases;
+ int unsafe_allocated_mases;
+ int interval;
+};
+
+int uwb_rsv_find_best_allocation(struct uwb_rsv *rsv,
+ struct uwb_mas_bm *available,
+ struct uwb_mas_bm *result);
+void uwb_rsv_handle_drp_avail_change(struct uwb_rc *rc);
+/*
+ * UWB Events & management daemon
+ */
+
+/**
+ * enum uwb_event_type - types of UWB management daemon events
+ *
+ * The UWB management daemon (uwbd) can receive two types of events:
+ * UWB_EVT_TYPE_NOTIF - notification from the radio controller.
+ * UWB_EVT_TYPE_MSG - a simple message.
+ */
+enum uwb_event_type {
+ UWB_EVT_TYPE_NOTIF,
+ UWB_EVT_TYPE_MSG,
+};
+
+/**
+ * struct uwb_event_notif - an event for a radio controller notification
+ * @size: Size of the buffer (ie: Guaranteed to contain at least
+ * a full 'struct uwb_rceb')
+ * @rceb: Pointer to a kmalloced() event payload
+ */
+struct uwb_event_notif {
+ size_t size;
+ struct uwb_rceb *rceb;
+};
+
+/**
+ * enum uwb_event_message - an event for a message for asynchronous processing
+ *
+ * UWB_EVT_MSG_RESET - reset the radio controller and all PAL hardware.
+ */
+enum uwb_event_message {
+ UWB_EVT_MSG_RESET,
+};
+
+/**
+ * UWB Event
+ * @rc: Radio controller that emitted the event (referenced)
+ * @ts_jiffies: Timestamp, when was it received
+ * @type: This event's type.
+ */
+struct uwb_event {
+ struct list_head list_node;
+ struct uwb_rc *rc;
+ unsigned long ts_jiffies;
+ enum uwb_event_type type;
+ union {
+ struct uwb_event_notif notif;
+ enum uwb_event_message message;
+ };
+};
+
+extern void uwbd_start(struct uwb_rc *rc);
+extern void uwbd_stop(struct uwb_rc *rc);
+extern struct uwb_event *uwb_event_alloc(size_t, gfp_t gfp_mask);
+extern void uwbd_event_queue(struct uwb_event *);
+void uwbd_flush(struct uwb_rc *rc);
+
+/* UWB event handlers */
+extern int uwbd_evt_handle_rc_ie_rcv(struct uwb_event *);
+extern int uwbd_evt_handle_rc_beacon(struct uwb_event *);
+extern int uwbd_evt_handle_rc_beacon_size(struct uwb_event *);
+extern int uwbd_evt_handle_rc_bpoie_change(struct uwb_event *);
+extern int uwbd_evt_handle_rc_bp_slot_change(struct uwb_event *);
+extern int uwbd_evt_handle_rc_drp(struct uwb_event *);
+extern int uwbd_evt_handle_rc_drp_avail(struct uwb_event *);
+
+int uwbd_msg_handle_reset(struct uwb_event *evt);
+
+
+/*
+ * Address management
+ */
+int uwb_rc_dev_addr_assign(struct uwb_rc *rc);
+int uwbd_evt_handle_rc_dev_addr_conflict(struct uwb_event *evt);
+
+/*
+ * UWB Beacon Cache
+ *
+ * Each beacon we received is kept in a cache--when we receive that
+ * beacon consistently, that means there is a new device that we have
+ * to add to the system.
+ */
+
+extern unsigned long beacon_timeout_ms;
+
+/**
+ * Beacon cache entry
+ *
+ * @jiffies_refresh: last time a beacon was received that refreshed
+ * this cache entry.
+ * @uwb_dev: device connected to this beacon. This pointer is not
+ * safe, you need to get it with uwb_dev_try_get()
+ *
+ * @hits: how many time we have seen this beacon since last time we
+ * cleared it
+ */
+struct uwb_beca_e {
+ struct mutex mutex;
+ struct kref refcnt;
+ struct list_head node;
+ struct uwb_mac_addr *mac_addr;
+ struct uwb_dev_addr dev_addr;
+ u8 hits;
+ unsigned long ts_jiffies;
+ struct uwb_dev *uwb_dev;
+ struct uwb_rc_evt_beacon *be;
+ struct stats lqe_stats, rssi_stats; /* radio statistics */
+};
+struct uwb_beacon_frame;
+extern ssize_t uwb_bce_print_IEs(struct uwb_dev *, struct uwb_beca_e *,
+ char *, size_t);
+
+extern void uwb_bce_kfree(struct kref *_bce);
+static inline void uwb_bce_get(struct uwb_beca_e *bce)
+{
+ kref_get(&bce->refcnt);
+}
+static inline void uwb_bce_put(struct uwb_beca_e *bce)
+{
+ kref_put(&bce->refcnt, uwb_bce_kfree);
+}
+extern void uwb_beca_purge(struct uwb_rc *rc);
+extern void uwb_beca_release(struct uwb_rc *rc);
+
+struct uwb_dev *uwb_dev_get_by_devaddr(struct uwb_rc *rc,
+ const struct uwb_dev_addr *devaddr);
+struct uwb_dev *uwb_dev_get_by_macaddr(struct uwb_rc *rc,
+ const struct uwb_mac_addr *macaddr);
+
+int uwb_radio_setup(struct uwb_rc *rc);
+void uwb_radio_reset_state(struct uwb_rc *rc);
+void uwb_radio_shutdown(struct uwb_rc *rc);
+int uwb_radio_force_channel(struct uwb_rc *rc, int channel);
+
+/* -- UWB Sysfs representation */
+extern struct class uwb_rc_class;
+extern struct bus_type uwb_bus_type;
+extern struct device_attribute dev_attr_mac_address;
+extern struct device_attribute dev_attr_beacon;
+extern struct device_attribute dev_attr_scan;
+
+/* -- DRP Bandwidth allocator: bandwidth allocations, reservations, DRP */
+void uwb_rsv_init(struct uwb_rc *rc);
+int uwb_rsv_setup(struct uwb_rc *rc);
+void uwb_rsv_cleanup(struct uwb_rc *rc);
+void uwb_rsv_remove_all(struct uwb_rc *rc);
+void uwb_rsv_get(struct uwb_rsv *rsv);
+void uwb_rsv_put(struct uwb_rsv *rsv);
+bool uwb_rsv_has_two_drp_ies(struct uwb_rsv *rsv);
+void uwb_rsv_dump(char *text, struct uwb_rsv *rsv);
+int uwb_rsv_try_move(struct uwb_rsv *rsv, struct uwb_mas_bm *available);
+void uwb_rsv_backoff_win_timer(unsigned long arg);
+void uwb_rsv_backoff_win_increment(struct uwb_rc *rc);
+int uwb_rsv_status(struct uwb_rsv *rsv);
+int uwb_rsv_companion_status(struct uwb_rsv *rsv);
+
+void uwb_rsv_set_state(struct uwb_rsv *rsv, enum uwb_rsv_state new_state);
+void uwb_rsv_remove(struct uwb_rsv *rsv);
+struct uwb_rsv *uwb_rsv_find(struct uwb_rc *rc, struct uwb_dev *src,
+ struct uwb_ie_drp *drp_ie);
+void uwb_rsv_sched_update(struct uwb_rc *rc);
+void uwb_rsv_queue_update(struct uwb_rc *rc);
+
+int uwb_drp_ie_update(struct uwb_rsv *rsv);
+void uwb_drp_ie_to_bm(struct uwb_mas_bm *bm, const struct uwb_ie_drp *drp_ie);
+
+void uwb_drp_avail_init(struct uwb_rc *rc);
+void uwb_drp_available(struct uwb_rc *rc, struct uwb_mas_bm *avail);
+int uwb_drp_avail_reserve_pending(struct uwb_rc *rc, struct uwb_mas_bm *mas);
+void uwb_drp_avail_reserve(struct uwb_rc *rc, struct uwb_mas_bm *mas);
+void uwb_drp_avail_release(struct uwb_rc *rc, struct uwb_mas_bm *mas);
+void uwb_drp_avail_ie_update(struct uwb_rc *rc);
+
+/* -- PAL support */
+void uwb_rc_pal_init(struct uwb_rc *rc);
+
+/* -- Misc */
+
+extern ssize_t uwb_mac_frame_hdr_print(char *, size_t,
+ const struct uwb_mac_frame_hdr *);
+
+/* -- Debug interface */
+void uwb_dbg_init(void);
+void uwb_dbg_exit(void);
+void uwb_dbg_add_rc(struct uwb_rc *rc);
+void uwb_dbg_del_rc(struct uwb_rc *rc);
+struct dentry *uwb_dbg_create_pal_dir(struct uwb_pal *pal);
+
+static inline void uwb_dev_lock(struct uwb_dev *uwb_dev)
+{
+ device_lock(&uwb_dev->dev);
+}
+
+static inline void uwb_dev_unlock(struct uwb_dev *uwb_dev)
+{
+ device_unlock(&uwb_dev->dev);
+}
+
+#endif /* #ifndef __UWB_INTERNAL_H__ */
diff --git a/drivers/uwb/uwbd.c b/drivers/uwb/uwbd.c
new file mode 100644
index 000000000..bdcb13cc1
--- /dev/null
+++ b/drivers/uwb/uwbd.c
@@ -0,0 +1,367 @@
+/*
+ * Ultra Wide Band
+ * Neighborhood Management Daemon
+ *
+ * Copyright (C) 2005-2006 Intel Corporation
+ * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ *
+ *
+ * This daemon takes care of maintaing information that describes the
+ * UWB neighborhood that the radios in this machine can see. It also
+ * keeps a tab of which devices are visible, makes sure each HC sits
+ * on a different channel to avoid interfering, etc.
+ *
+ * Different drivers (radio controller, device, any API in general)
+ * communicate with this daemon through an event queue. Daemon wakes
+ * up, takes a list of events and handles them one by one; handling
+ * function is extracted from a table based on the event's type and
+ * subtype. Events are freed only if the handling function says so.
+ *
+ * . Lock protecting the event list has to be an spinlock and locked
+ * with IRQSAVE because it might be called from an interrupt
+ * context (ie: when events arrive and the notification drops
+ * down from the ISR).
+ *
+ * . UWB radio controller drivers queue events to the daemon using
+ * uwbd_event_queue(). They just get the event, chew it to make it
+ * look like UWBD likes it and pass it in a buffer allocated with
+ * uwb_event_alloc().
+ *
+ * EVENTS
+ *
+ * Events have a type, a subtype, a length, some other stuff and the
+ * data blob, which depends on the event. The header is 'struct
+ * uwb_event'; for payloads, see 'struct uwbd_evt_*'.
+ *
+ * EVENT HANDLER TABLES
+ *
+ * To find a handling function for an event, the type is used to index
+ * a subtype-table in the type-table. The subtype-table is indexed
+ * with the subtype to get the function that handles the event. Start
+ * with the main type-table 'uwbd_evt_type_handler'.
+ *
+ * DEVICES
+ *
+ * Devices are created when a bunch of beacons have been received and
+ * it is stablished that the device has stable radio presence. CREATED
+ * only, not configured. Devices are ONLY configured when an
+ * Application-Specific IE Probe is receieved, in which the device
+ * declares which Protocol ID it groks. Then the device is CONFIGURED
+ * (and the driver->probe() stuff of the device model is invoked).
+ *
+ * Devices are considered disconnected when a certain number of
+ * beacons are not received in an amount of time.
+ *
+ * Handler functions are called normally uwbd_evt_handle_*().
+ */
+#include <linux/kthread.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/freezer.h>
+
+#include "uwb-internal.h"
+
+/*
+ * UWBD Event handler function signature
+ *
+ * Return !0 if the event needs not to be freed (ie the handler
+ * takes/took care of it). 0 means the daemon code will free the
+ * event.
+ *
+ * @evt->rc is already referenced and guaranteed to exist. See
+ * uwb_evt_handle().
+ */
+typedef int (*uwbd_evt_handler_f)(struct uwb_event *);
+
+/**
+ * Properties of a UWBD event
+ *
+ * @handler: the function that will handle this event
+ * @name: text name of event
+ */
+struct uwbd_event {
+ uwbd_evt_handler_f handler;
+ const char *name;
+};
+
+/* Table of handlers for and properties of the UWBD Radio Control Events */
+static struct uwbd_event uwbd_urc_events[] = {
+ [UWB_RC_EVT_IE_RCV] = {
+ .handler = uwbd_evt_handle_rc_ie_rcv,
+ .name = "IE_RECEIVED"
+ },
+ [UWB_RC_EVT_BEACON] = {
+ .handler = uwbd_evt_handle_rc_beacon,
+ .name = "BEACON_RECEIVED"
+ },
+ [UWB_RC_EVT_BEACON_SIZE] = {
+ .handler = uwbd_evt_handle_rc_beacon_size,
+ .name = "BEACON_SIZE_CHANGE"
+ },
+ [UWB_RC_EVT_BPOIE_CHANGE] = {
+ .handler = uwbd_evt_handle_rc_bpoie_change,
+ .name = "BPOIE_CHANGE"
+ },
+ [UWB_RC_EVT_BP_SLOT_CHANGE] = {
+ .handler = uwbd_evt_handle_rc_bp_slot_change,
+ .name = "BP_SLOT_CHANGE"
+ },
+ [UWB_RC_EVT_DRP_AVAIL] = {
+ .handler = uwbd_evt_handle_rc_drp_avail,
+ .name = "DRP_AVAILABILITY_CHANGE"
+ },
+ [UWB_RC_EVT_DRP] = {
+ .handler = uwbd_evt_handle_rc_drp,
+ .name = "DRP"
+ },
+ [UWB_RC_EVT_DEV_ADDR_CONFLICT] = {
+ .handler = uwbd_evt_handle_rc_dev_addr_conflict,
+ .name = "DEV_ADDR_CONFLICT",
+ },
+};
+
+
+
+struct uwbd_evt_type_handler {
+ const char *name;
+ struct uwbd_event *uwbd_events;
+ size_t size;
+};
+
+/* Table of handlers for each UWBD Event type. */
+static struct uwbd_evt_type_handler uwbd_urc_evt_type_handlers[] = {
+ [UWB_RC_CET_GENERAL] = {
+ .name = "URC",
+ .uwbd_events = uwbd_urc_events,
+ .size = ARRAY_SIZE(uwbd_urc_events),
+ },
+};
+
+static const struct uwbd_event uwbd_message_handlers[] = {
+ [UWB_EVT_MSG_RESET] = {
+ .handler = uwbd_msg_handle_reset,
+ .name = "reset",
+ },
+};
+
+/*
+ * Handle an URC event passed to the UWB Daemon
+ *
+ * @evt: the event to handle
+ * @returns: 0 if the event can be kfreed, !0 on the contrary
+ * (somebody else took ownership) [coincidentally, returning
+ * a <0 errno code will free it :)].
+ *
+ * Looks up the two indirection tables (one for the type, one for the
+ * subtype) to decide which function handles it and then calls the
+ * handler.
+ *
+ * The event structure passed to the event handler has the radio
+ * controller in @evt->rc referenced. The reference will be dropped
+ * once the handler returns, so if it needs it for longer (async),
+ * it'll need to take another one.
+ */
+static
+int uwbd_event_handle_urc(struct uwb_event *evt)
+{
+ int result = -EINVAL;
+ struct uwbd_evt_type_handler *type_table;
+ uwbd_evt_handler_f handler;
+ u8 type, context;
+ u16 event;
+
+ type = evt->notif.rceb->bEventType;
+ event = le16_to_cpu(evt->notif.rceb->wEvent);
+ context = evt->notif.rceb->bEventContext;
+
+ if (type >= ARRAY_SIZE(uwbd_urc_evt_type_handlers))
+ goto out;
+ type_table = &uwbd_urc_evt_type_handlers[type];
+ if (type_table->uwbd_events == NULL)
+ goto out;
+ if (event >= type_table->size)
+ goto out;
+ handler = type_table->uwbd_events[event].handler;
+ if (handler == NULL)
+ goto out;
+
+ result = (*handler)(evt);
+out:
+ if (result < 0)
+ dev_err(&evt->rc->uwb_dev.dev,
+ "UWBD: event 0x%02x/%04x/%02x, handling failed: %d\n",
+ type, event, context, result);
+ return result;
+}
+
+static void uwbd_event_handle_message(struct uwb_event *evt)
+{
+ struct uwb_rc *rc;
+ int result;
+
+ rc = evt->rc;
+
+ if (evt->message < 0 || evt->message >= ARRAY_SIZE(uwbd_message_handlers)) {
+ dev_err(&rc->uwb_dev.dev, "UWBD: invalid message type %d\n", evt->message);
+ return;
+ }
+
+ result = uwbd_message_handlers[evt->message].handler(evt);
+ if (result < 0)
+ dev_err(&rc->uwb_dev.dev, "UWBD: '%s' message failed: %d\n",
+ uwbd_message_handlers[evt->message].name, result);
+}
+
+static void uwbd_event_handle(struct uwb_event *evt)
+{
+ struct uwb_rc *rc;
+ int should_keep;
+
+ rc = evt->rc;
+
+ if (rc->ready) {
+ switch (evt->type) {
+ case UWB_EVT_TYPE_NOTIF:
+ should_keep = uwbd_event_handle_urc(evt);
+ if (should_keep <= 0)
+ kfree(evt->notif.rceb);
+ break;
+ case UWB_EVT_TYPE_MSG:
+ uwbd_event_handle_message(evt);
+ break;
+ default:
+ dev_err(&rc->uwb_dev.dev, "UWBD: invalid event type %d\n", evt->type);
+ break;
+ }
+ }
+
+ __uwb_rc_put(rc); /* for the __uwb_rc_get() in uwb_rc_notif_cb() */
+}
+
+/**
+ * UWB Daemon
+ *
+ * Listens to all UWB notifications and takes care to track the state
+ * of the UWB neighbourhood for the kernel. When we do a run, we
+ * spinlock, move the list to a private copy and release the
+ * lock. Hold it as little as possible. Not a conflict: it is
+ * guaranteed we own the events in the private list.
+ *
+ * FIXME: should change so we don't have a 1HZ timer all the time, but
+ * only if there are devices.
+ */
+static int uwbd(void *param)
+{
+ struct uwb_rc *rc = param;
+ unsigned long flags;
+ struct uwb_event *evt;
+ int should_stop = 0;
+
+ while (1) {
+ wait_event_interruptible_timeout(
+ rc->uwbd.wq,
+ !list_empty(&rc->uwbd.event_list)
+ || (should_stop = kthread_should_stop()),
+ HZ);
+ if (should_stop)
+ break;
+ try_to_freeze();
+
+ spin_lock_irqsave(&rc->uwbd.event_list_lock, flags);
+ if (!list_empty(&rc->uwbd.event_list)) {
+ evt = list_first_entry(&rc->uwbd.event_list, struct uwb_event, list_node);
+ list_del(&evt->list_node);
+ } else
+ evt = NULL;
+ spin_unlock_irqrestore(&rc->uwbd.event_list_lock, flags);
+
+ if (evt) {
+ uwbd_event_handle(evt);
+ kfree(evt);
+ }
+
+ uwb_beca_purge(rc); /* Purge devices that left */
+ }
+ return 0;
+}
+
+
+/** Start the UWB daemon */
+void uwbd_start(struct uwb_rc *rc)
+{
+ rc->uwbd.task = kthread_run(uwbd, rc, "uwbd");
+ if (rc->uwbd.task == NULL)
+ printk(KERN_ERR "UWB: Cannot start management daemon; "
+ "UWB won't work\n");
+ else
+ rc->uwbd.pid = rc->uwbd.task->pid;
+}
+
+/* Stop the UWB daemon and free any unprocessed events */
+void uwbd_stop(struct uwb_rc *rc)
+{
+ kthread_stop(rc->uwbd.task);
+ uwbd_flush(rc);
+}
+
+/*
+ * Queue an event for the management daemon
+ *
+ * When some lower layer receives an event, it uses this function to
+ * push it forward to the UWB daemon.
+ *
+ * Once you pass the event, you don't own it any more, but the daemon
+ * does. It will uwb_event_free() it when done, so make sure you
+ * uwb_event_alloc()ed it or bad things will happen.
+ *
+ * If the daemon is not running, we just free the event.
+ */
+void uwbd_event_queue(struct uwb_event *evt)
+{
+ struct uwb_rc *rc = evt->rc;
+ unsigned long flags;
+
+ spin_lock_irqsave(&rc->uwbd.event_list_lock, flags);
+ if (rc->uwbd.pid != 0) {
+ list_add(&evt->list_node, &rc->uwbd.event_list);
+ wake_up_all(&rc->uwbd.wq);
+ } else {
+ __uwb_rc_put(evt->rc);
+ if (evt->type == UWB_EVT_TYPE_NOTIF)
+ kfree(evt->notif.rceb);
+ kfree(evt);
+ }
+ spin_unlock_irqrestore(&rc->uwbd.event_list_lock, flags);
+ return;
+}
+
+void uwbd_flush(struct uwb_rc *rc)
+{
+ struct uwb_event *evt, *nxt;
+
+ spin_lock_irq(&rc->uwbd.event_list_lock);
+ list_for_each_entry_safe(evt, nxt, &rc->uwbd.event_list, list_node) {
+ if (evt->rc == rc) {
+ __uwb_rc_put(rc);
+ list_del(&evt->list_node);
+ if (evt->type == UWB_EVT_TYPE_NOTIF)
+ kfree(evt->notif.rceb);
+ kfree(evt);
+ }
+ }
+ spin_unlock_irq(&rc->uwbd.event_list_lock);
+}
diff --git a/drivers/uwb/whc-rc.c b/drivers/uwb/whc-rc.c
new file mode 100644
index 000000000..3ae3c7025
--- /dev/null
+++ b/drivers/uwb/whc-rc.c
@@ -0,0 +1,481 @@
+/*
+ * Wireless Host Controller: Radio Control Interface (WHCI v0.95[2.3])
+ * Radio Control command/event transport to the UWB stack
+ *
+ * Copyright (C) 2005-2006 Intel Corporation
+ * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ *
+ *
+ * Initialize and hook up the Radio Control interface.
+ *
+ * For each device probed, creates an 'struct whcrc' which contains
+ * just the representation of the UWB Radio Controller, and the logic
+ * for reading notifications and passing them to the UWB Core.
+ *
+ * So we initialize all of those, register the UWB Radio Controller
+ * and setup the notification/event handle to pipe the notifications
+ * to the UWB management Daemon.
+ *
+ * Once uwb_rc_add() is called, the UWB stack takes control, resets
+ * the radio and readies the device to take commands the UWB
+ * API/user-space.
+ *
+ * Note this driver is just a transport driver; the commands are
+ * formed at the UWB stack and given to this driver who will deliver
+ * them to the hw and transfer the replies/notifications back to the
+ * UWB stack through the UWB daemon (UWBD).
+ */
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/sched.h>
+#include <linux/dma-mapping.h>
+#include <linux/interrupt.h>
+#include <linux/slab.h>
+#include <linux/workqueue.h>
+#include <linux/uwb.h>
+#include <linux/uwb/whci.h>
+#include <linux/uwb/umc.h>
+
+#include "uwb-internal.h"
+
+/**
+ * Descriptor for an instance of the UWB Radio Control Driver that
+ * attaches to the URC interface of the WHCI PCI card.
+ *
+ * Unless there is a lock specific to the 'data members', all access
+ * is protected by uwb_rc->mutex.
+ */
+struct whcrc {
+ struct umc_dev *umc_dev;
+ struct uwb_rc *uwb_rc; /* UWB host controller */
+
+ unsigned long area;
+ void __iomem *rc_base;
+ size_t rc_len;
+ spinlock_t irq_lock;
+
+ void *evt_buf, *cmd_buf;
+ dma_addr_t evt_dma_buf, cmd_dma_buf;
+ wait_queue_head_t cmd_wq;
+ struct work_struct event_work;
+};
+
+/**
+ * Execute an UWB RC command on WHCI/RC
+ *
+ * @rc: Instance of a Radio Controller that is a whcrc
+ * @cmd: Buffer containing the RCCB and payload to execute
+ * @cmd_size: Size of the command buffer.
+ *
+ * We copy the command into whcrc->cmd_buf (as it is pretty and
+ * aligned`and physically contiguous) and then press the right keys in
+ * the controller's URCCMD register to get it to read it. We might
+ * have to wait for the cmd_sem to be open to us.
+ *
+ * NOTE: rc's mutex has to be locked
+ */
+static int whcrc_cmd(struct uwb_rc *uwb_rc,
+ const struct uwb_rccb *cmd, size_t cmd_size)
+{
+ int result = 0;
+ struct whcrc *whcrc = uwb_rc->priv;
+ struct device *dev = &whcrc->umc_dev->dev;
+ u32 urccmd;
+
+ if (cmd_size >= 4096)
+ return -EINVAL;
+
+ /*
+ * If the URC is halted, then the hardware has reset itself.
+ * Attempt to recover by restarting the device and then return
+ * an error as it's likely that the current command isn't
+ * valid for a newly started RC.
+ */
+ if (le_readl(whcrc->rc_base + URCSTS) & URCSTS_HALTED) {
+ dev_err(dev, "requesting reset of halted radio controller\n");
+ uwb_rc_reset_all(uwb_rc);
+ return -EIO;
+ }
+
+ result = wait_event_timeout(whcrc->cmd_wq,
+ !(le_readl(whcrc->rc_base + URCCMD) & URCCMD_ACTIVE), HZ/2);
+ if (result == 0) {
+ dev_err(dev, "device is not ready to execute commands\n");
+ return -ETIMEDOUT;
+ }
+
+ memmove(whcrc->cmd_buf, cmd, cmd_size);
+ le_writeq(whcrc->cmd_dma_buf, whcrc->rc_base + URCCMDADDR);
+
+ spin_lock(&whcrc->irq_lock);
+ urccmd = le_readl(whcrc->rc_base + URCCMD);
+ urccmd &= ~(URCCMD_EARV | URCCMD_SIZE_MASK);
+ le_writel(urccmd | URCCMD_ACTIVE | URCCMD_IWR | cmd_size,
+ whcrc->rc_base + URCCMD);
+ spin_unlock(&whcrc->irq_lock);
+
+ return 0;
+}
+
+static int whcrc_reset(struct uwb_rc *rc)
+{
+ struct whcrc *whcrc = rc->priv;
+
+ return umc_controller_reset(whcrc->umc_dev);
+}
+
+/**
+ * Reset event reception mechanism and tell hw we are ready to get more
+ *
+ * We have read all the events in the event buffer, so we are ready to
+ * reset it to the beginning.
+ *
+ * This is only called during initialization or after an event buffer
+ * has been retired. This means we can be sure that event processing
+ * is disabled and it's safe to update the URCEVTADDR register.
+ *
+ * There's no need to wait for the event processing to start as the
+ * URC will not clear URCCMD_ACTIVE until (internal) event buffer
+ * space is available.
+ */
+static
+void whcrc_enable_events(struct whcrc *whcrc)
+{
+ u32 urccmd;
+
+ le_writeq(whcrc->evt_dma_buf, whcrc->rc_base + URCEVTADDR);
+
+ spin_lock(&whcrc->irq_lock);
+ urccmd = le_readl(whcrc->rc_base + URCCMD) & ~URCCMD_ACTIVE;
+ le_writel(urccmd | URCCMD_EARV, whcrc->rc_base + URCCMD);
+ spin_unlock(&whcrc->irq_lock);
+}
+
+static void whcrc_event_work(struct work_struct *work)
+{
+ struct whcrc *whcrc = container_of(work, struct whcrc, event_work);
+ size_t size;
+ u64 urcevtaddr;
+
+ urcevtaddr = le_readq(whcrc->rc_base + URCEVTADDR);
+ size = urcevtaddr & URCEVTADDR_OFFSET_MASK;
+
+ uwb_rc_neh_grok(whcrc->uwb_rc, whcrc->evt_buf, size);
+ whcrc_enable_events(whcrc);
+}
+
+/**
+ * Catch interrupts?
+ *
+ * We ack inmediately (and expect the hw to do the right thing and
+ * raise another IRQ if things have changed :)
+ */
+static
+irqreturn_t whcrc_irq_cb(int irq, void *_whcrc)
+{
+ struct whcrc *whcrc = _whcrc;
+ struct device *dev = &whcrc->umc_dev->dev;
+ u32 urcsts;
+
+ urcsts = le_readl(whcrc->rc_base + URCSTS);
+ if (!(urcsts & URCSTS_INT_MASK))
+ return IRQ_NONE;
+ le_writel(urcsts & URCSTS_INT_MASK, whcrc->rc_base + URCSTS);
+
+ if (urcsts & URCSTS_HSE) {
+ dev_err(dev, "host system error -- hardware halted\n");
+ /* FIXME: do something sensible here */
+ goto out;
+ }
+ if (urcsts & URCSTS_ER)
+ schedule_work(&whcrc->event_work);
+ if (urcsts & URCSTS_RCI)
+ wake_up_all(&whcrc->cmd_wq);
+out:
+ return IRQ_HANDLED;
+}
+
+
+/**
+ * Initialize a UMC RC interface: map regions, get (shared) IRQ
+ */
+static
+int whcrc_setup_rc_umc(struct whcrc *whcrc)
+{
+ int result = 0;
+ struct device *dev = &whcrc->umc_dev->dev;
+ struct umc_dev *umc_dev = whcrc->umc_dev;
+
+ whcrc->area = umc_dev->resource.start;
+ whcrc->rc_len = resource_size(&umc_dev->resource);
+ result = -EBUSY;
+ if (request_mem_region(whcrc->area, whcrc->rc_len, KBUILD_MODNAME) == NULL) {
+ dev_err(dev, "can't request URC region (%zu bytes @ 0x%lx): %d\n",
+ whcrc->rc_len, whcrc->area, result);
+ goto error_request_region;
+ }
+
+ whcrc->rc_base = ioremap_nocache(whcrc->area, whcrc->rc_len);
+ if (whcrc->rc_base == NULL) {
+ dev_err(dev, "can't ioremap registers (%zu bytes @ 0x%lx): %d\n",
+ whcrc->rc_len, whcrc->area, result);
+ goto error_ioremap_nocache;
+ }
+
+ result = request_irq(umc_dev->irq, whcrc_irq_cb, IRQF_SHARED,
+ KBUILD_MODNAME, whcrc);
+ if (result < 0) {
+ dev_err(dev, "can't allocate IRQ %d: %d\n",
+ umc_dev->irq, result);
+ goto error_request_irq;
+ }
+
+ result = -ENOMEM;
+ whcrc->cmd_buf = dma_alloc_coherent(&umc_dev->dev, PAGE_SIZE,
+ &whcrc->cmd_dma_buf, GFP_KERNEL);
+ if (whcrc->cmd_buf == NULL) {
+ dev_err(dev, "Can't allocate cmd transfer buffer\n");
+ goto error_cmd_buffer;
+ }
+
+ whcrc->evt_buf = dma_alloc_coherent(&umc_dev->dev, PAGE_SIZE,
+ &whcrc->evt_dma_buf, GFP_KERNEL);
+ if (whcrc->evt_buf == NULL) {
+ dev_err(dev, "Can't allocate evt transfer buffer\n");
+ goto error_evt_buffer;
+ }
+ return 0;
+
+error_evt_buffer:
+ dma_free_coherent(&umc_dev->dev, PAGE_SIZE, whcrc->cmd_buf,
+ whcrc->cmd_dma_buf);
+error_cmd_buffer:
+ free_irq(umc_dev->irq, whcrc);
+error_request_irq:
+ iounmap(whcrc->rc_base);
+error_ioremap_nocache:
+ release_mem_region(whcrc->area, whcrc->rc_len);
+error_request_region:
+ return result;
+}
+
+
+/**
+ * Release RC's UMC resources
+ */
+static
+void whcrc_release_rc_umc(struct whcrc *whcrc)
+{
+ struct umc_dev *umc_dev = whcrc->umc_dev;
+
+ dma_free_coherent(&umc_dev->dev, PAGE_SIZE, whcrc->evt_buf,
+ whcrc->evt_dma_buf);
+ dma_free_coherent(&umc_dev->dev, PAGE_SIZE, whcrc->cmd_buf,
+ whcrc->cmd_dma_buf);
+ free_irq(umc_dev->irq, whcrc);
+ iounmap(whcrc->rc_base);
+ release_mem_region(whcrc->area, whcrc->rc_len);
+}
+
+
+/**
+ * whcrc_start_rc - start a WHCI radio controller
+ * @whcrc: the radio controller to start
+ *
+ * Reset the UMC device, start the radio controller, enable events and
+ * finally enable interrupts.
+ */
+static int whcrc_start_rc(struct uwb_rc *rc)
+{
+ struct whcrc *whcrc = rc->priv;
+ struct device *dev = &whcrc->umc_dev->dev;
+
+ /* Reset the thing */
+ le_writel(URCCMD_RESET, whcrc->rc_base + URCCMD);
+ if (whci_wait_for(dev, whcrc->rc_base + URCCMD, URCCMD_RESET, 0,
+ 5000, "hardware reset") < 0)
+ return -EBUSY;
+
+ /* Set the event buffer, start the controller (enable IRQs later) */
+ le_writel(0, whcrc->rc_base + URCINTR);
+ le_writel(URCCMD_RS, whcrc->rc_base + URCCMD);
+ if (whci_wait_for(dev, whcrc->rc_base + URCSTS, URCSTS_HALTED, 0,
+ 5000, "radio controller start") < 0)
+ return -ETIMEDOUT;
+ whcrc_enable_events(whcrc);
+ le_writel(URCINTR_EN_ALL, whcrc->rc_base + URCINTR);
+ return 0;
+}
+
+
+/**
+ * whcrc_stop_rc - stop a WHCI radio controller
+ * @whcrc: the radio controller to stop
+ *
+ * Disable interrupts and cancel any pending event processing work
+ * before clearing the Run/Stop bit.
+ */
+static
+void whcrc_stop_rc(struct uwb_rc *rc)
+{
+ struct whcrc *whcrc = rc->priv;
+ struct umc_dev *umc_dev = whcrc->umc_dev;
+
+ le_writel(0, whcrc->rc_base + URCINTR);
+ cancel_work_sync(&whcrc->event_work);
+
+ le_writel(0, whcrc->rc_base + URCCMD);
+ whci_wait_for(&umc_dev->dev, whcrc->rc_base + URCSTS,
+ URCSTS_HALTED, URCSTS_HALTED, 100, "radio controller stop");
+}
+
+static void whcrc_init(struct whcrc *whcrc)
+{
+ spin_lock_init(&whcrc->irq_lock);
+ init_waitqueue_head(&whcrc->cmd_wq);
+ INIT_WORK(&whcrc->event_work, whcrc_event_work);
+}
+
+/**
+ * Initialize the radio controller.
+ *
+ * NOTE: we setup whcrc->uwb_rc before calling uwb_rc_add(); in the
+ * IRQ handler we use that to determine if the hw is ready to
+ * handle events. Looks like a race condition, but it really is
+ * not.
+ */
+static
+int whcrc_probe(struct umc_dev *umc_dev)
+{
+ int result;
+ struct uwb_rc *uwb_rc;
+ struct whcrc *whcrc;
+ struct device *dev = &umc_dev->dev;
+
+ result = -ENOMEM;
+ uwb_rc = uwb_rc_alloc();
+ if (uwb_rc == NULL) {
+ dev_err(dev, "unable to allocate RC instance\n");
+ goto error_rc_alloc;
+ }
+ whcrc = kzalloc(sizeof(*whcrc), GFP_KERNEL);
+ if (whcrc == NULL) {
+ dev_err(dev, "unable to allocate WHC-RC instance\n");
+ goto error_alloc;
+ }
+ whcrc_init(whcrc);
+ whcrc->umc_dev = umc_dev;
+
+ result = whcrc_setup_rc_umc(whcrc);
+ if (result < 0) {
+ dev_err(dev, "Can't setup RC UMC interface: %d\n", result);
+ goto error_setup_rc_umc;
+ }
+ whcrc->uwb_rc = uwb_rc;
+
+ uwb_rc->owner = THIS_MODULE;
+ uwb_rc->cmd = whcrc_cmd;
+ uwb_rc->reset = whcrc_reset;
+ uwb_rc->start = whcrc_start_rc;
+ uwb_rc->stop = whcrc_stop_rc;
+
+ result = uwb_rc_add(uwb_rc, dev, whcrc);
+ if (result < 0)
+ goto error_rc_add;
+ umc_set_drvdata(umc_dev, whcrc);
+ return 0;
+
+error_rc_add:
+ whcrc_release_rc_umc(whcrc);
+error_setup_rc_umc:
+ kfree(whcrc);
+error_alloc:
+ uwb_rc_put(uwb_rc);
+error_rc_alloc:
+ return result;
+}
+
+/**
+ * Clean up the radio control resources
+ *
+ * When we up the command semaphore, everybody possibly held trying to
+ * execute a command should be granted entry and then they'll see the
+ * host is quiescing and up it (so it will chain to the next waiter).
+ * This should not happen (in any case), as we can only remove when
+ * there are no handles open...
+ */
+static void whcrc_remove(struct umc_dev *umc_dev)
+{
+ struct whcrc *whcrc = umc_get_drvdata(umc_dev);
+ struct uwb_rc *uwb_rc = whcrc->uwb_rc;
+
+ umc_set_drvdata(umc_dev, NULL);
+ uwb_rc_rm(uwb_rc);
+ whcrc_release_rc_umc(whcrc);
+ kfree(whcrc);
+ uwb_rc_put(uwb_rc);
+}
+
+static int whcrc_pre_reset(struct umc_dev *umc)
+{
+ struct whcrc *whcrc = umc_get_drvdata(umc);
+ struct uwb_rc *uwb_rc = whcrc->uwb_rc;
+
+ uwb_rc_pre_reset(uwb_rc);
+ return 0;
+}
+
+static int whcrc_post_reset(struct umc_dev *umc)
+{
+ struct whcrc *whcrc = umc_get_drvdata(umc);
+ struct uwb_rc *uwb_rc = whcrc->uwb_rc;
+
+ return uwb_rc_post_reset(uwb_rc);
+}
+
+/* PCI device ID's that we handle [so it gets loaded] */
+static struct pci_device_id __used whcrc_id_table[] = {
+ { PCI_DEVICE_CLASS(PCI_CLASS_WIRELESS_WHCI, ~0) },
+ { /* empty last entry */ }
+};
+MODULE_DEVICE_TABLE(pci, whcrc_id_table);
+
+static struct umc_driver whcrc_driver = {
+ .name = "whc-rc",
+ .cap_id = UMC_CAP_ID_WHCI_RC,
+ .probe = whcrc_probe,
+ .remove = whcrc_remove,
+ .pre_reset = whcrc_pre_reset,
+ .post_reset = whcrc_post_reset,
+};
+
+static int __init whcrc_driver_init(void)
+{
+ return umc_driver_register(&whcrc_driver);
+}
+module_init(whcrc_driver_init);
+
+static void __exit whcrc_driver_exit(void)
+{
+ umc_driver_unregister(&whcrc_driver);
+}
+module_exit(whcrc_driver_exit);
+
+MODULE_AUTHOR("Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>");
+MODULE_DESCRIPTION("Wireless Host Controller Radio Control Driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/uwb/whci.c b/drivers/uwb/whci.c
new file mode 100644
index 000000000..c3ee39a04
--- /dev/null
+++ b/drivers/uwb/whci.c
@@ -0,0 +1,258 @@
+/*
+ * WHCI UWB Multi-interface Controller enumerator.
+ *
+ * Copyright (C) 2007 Cambridge Silicon Radio Ltd.
+ *
+ * This file is released under the GNU GPL v2.
+ */
+#include <linux/delay.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/dma-mapping.h>
+#include <linux/slab.h>
+#include <linux/uwb/whci.h>
+#include <linux/uwb/umc.h>
+
+struct whci_card {
+ struct pci_dev *pci;
+ void __iomem *uwbbase;
+ u8 n_caps;
+ struct umc_dev *devs[0];
+};
+
+
+/* Fix faulty HW :( */
+static
+u64 whci_capdata_quirks(struct whci_card *card, u64 capdata)
+{
+ u64 capdata_orig = capdata;
+ struct pci_dev *pci_dev = card->pci;
+ if (pci_dev->vendor == PCI_VENDOR_ID_INTEL
+ && (pci_dev->device == 0x0c3b || pci_dev->device == 0004)
+ && pci_dev->class == 0x0d1010) {
+ switch (UWBCAPDATA_TO_CAP_ID(capdata)) {
+ /* WLP capability has 0x100 bytes of aperture */
+ case 0x80:
+ capdata |= 0x40 << 8; break;
+ /* WUSB capability has 0x80 bytes of aperture
+ * and ID is 1 */
+ case 0x02:
+ capdata &= ~0xffff;
+ capdata |= 0x2001;
+ break;
+ }
+ }
+ if (capdata_orig != capdata)
+ dev_warn(&pci_dev->dev,
+ "PCI v%04x d%04x c%06x#%02x: "
+ "corrected capdata from %016Lx to %016Lx\n",
+ pci_dev->vendor, pci_dev->device, pci_dev->class,
+ (unsigned)UWBCAPDATA_TO_CAP_ID(capdata),
+ (unsigned long long)capdata_orig,
+ (unsigned long long)capdata);
+ return capdata;
+}
+
+
+/**
+ * whci_wait_for - wait for a WHCI register to be set
+ *
+ * Polls (for at most @max_ms ms) until '*@reg & @mask == @result'.
+ */
+int whci_wait_for(struct device *dev, u32 __iomem *reg, u32 mask, u32 result,
+ unsigned long max_ms, const char *tag)
+{
+ unsigned t = 0;
+ u32 val;
+ for (;;) {
+ val = le_readl(reg);
+ if ((val & mask) == result)
+ break;
+ if (t >= max_ms) {
+ dev_err(dev, "%s timed out\n", tag);
+ return -ETIMEDOUT;
+ }
+ msleep(10);
+ t += 10;
+ }
+ return 0;
+}
+EXPORT_SYMBOL_GPL(whci_wait_for);
+
+
+/*
+ * NOTE: the capinfo and capdata registers are slightly different
+ * (size and cap-id fields). So for cap #0, we need to fill
+ * in. Size comes from the size of the register block
+ * (statically calculated); cap_id comes from nowhere, we use
+ * zero, that is reserved, for the radio controller, because
+ * none was defined at the spec level.
+ */
+static int whci_add_cap(struct whci_card *card, int n)
+{
+ struct umc_dev *umc;
+ u64 capdata;
+ int bar, err;
+
+ umc = umc_device_create(&card->pci->dev, n);
+ if (umc == NULL)
+ return -ENOMEM;
+
+ capdata = le_readq(card->uwbbase + UWBCAPDATA(n));
+
+ bar = UWBCAPDATA_TO_BAR(capdata) << 1;
+
+ capdata = whci_capdata_quirks(card, capdata);
+ /* Capability 0 is the radio controller. It's size is 32
+ * bytes (WHCI0.95[2.3, T2-9]). */
+ umc->version = UWBCAPDATA_TO_VERSION(capdata);
+ umc->cap_id = n == 0 ? 0 : UWBCAPDATA_TO_CAP_ID(capdata);
+ umc->bar = bar;
+ umc->resource.start = pci_resource_start(card->pci, bar)
+ + UWBCAPDATA_TO_OFFSET(capdata);
+ umc->resource.end = umc->resource.start
+ + (n == 0 ? 0x20 : UWBCAPDATA_TO_SIZE(capdata)) - 1;
+ umc->resource.name = dev_name(&umc->dev);
+ umc->resource.flags = card->pci->resource[bar].flags;
+ umc->resource.parent = &card->pci->resource[bar];
+ umc->irq = card->pci->irq;
+
+ err = umc_device_register(umc);
+ if (err < 0)
+ goto error;
+ card->devs[n] = umc;
+ return 0;
+
+error:
+ kfree(umc);
+ return err;
+}
+
+static void whci_del_cap(struct whci_card *card, int n)
+{
+ struct umc_dev *umc = card->devs[n];
+
+ umc_device_unregister(umc);
+}
+
+static int whci_n_caps(struct pci_dev *pci)
+{
+ void __iomem *uwbbase;
+ u64 capinfo;
+
+ uwbbase = pci_iomap(pci, 0, 8);
+ if (!uwbbase)
+ return -ENOMEM;
+ capinfo = le_readq(uwbbase + UWBCAPINFO);
+ pci_iounmap(pci, uwbbase);
+
+ return UWBCAPINFO_TO_N_CAPS(capinfo);
+}
+
+static int whci_probe(struct pci_dev *pci, const struct pci_device_id *id)
+{
+ struct whci_card *card;
+ int err, n_caps, n;
+
+ err = pci_enable_device(pci);
+ if (err < 0)
+ goto error;
+ pci_enable_msi(pci);
+ pci_set_master(pci);
+ err = -ENXIO;
+ if (!pci_set_dma_mask(pci, DMA_BIT_MASK(64)))
+ pci_set_consistent_dma_mask(pci, DMA_BIT_MASK(64));
+ else if (!pci_set_dma_mask(pci, DMA_BIT_MASK(32)))
+ pci_set_consistent_dma_mask(pci, DMA_BIT_MASK(32));
+ else
+ goto error_dma;
+
+ err = n_caps = whci_n_caps(pci);
+ if (n_caps < 0)
+ goto error_ncaps;
+
+ err = -ENOMEM;
+ card = kzalloc(sizeof(struct whci_card)
+ + sizeof(struct umc_dev *) * (n_caps + 1),
+ GFP_KERNEL);
+ if (card == NULL)
+ goto error_kzalloc;
+ card->pci = pci;
+ card->n_caps = n_caps;
+
+ err = -EBUSY;
+ if (!request_mem_region(pci_resource_start(pci, 0),
+ UWBCAPDATA_SIZE(card->n_caps),
+ "whci (capability data)"))
+ goto error_request_memregion;
+ err = -ENOMEM;
+ card->uwbbase = pci_iomap(pci, 0, UWBCAPDATA_SIZE(card->n_caps));
+ if (!card->uwbbase)
+ goto error_iomap;
+
+ /* Add each capability. */
+ for (n = 0; n <= card->n_caps; n++) {
+ err = whci_add_cap(card, n);
+ if (err < 0 && n == 0) {
+ dev_err(&pci->dev, "cannot bind UWB radio controller:"
+ " %d\n", err);
+ goto error_bind;
+ }
+ if (err < 0)
+ dev_warn(&pci->dev, "warning: cannot bind capability "
+ "#%u: %d\n", n, err);
+ }
+ pci_set_drvdata(pci, card);
+ return 0;
+
+error_bind:
+ pci_iounmap(pci, card->uwbbase);
+error_iomap:
+ release_mem_region(pci_resource_start(pci, 0), UWBCAPDATA_SIZE(card->n_caps));
+error_request_memregion:
+ kfree(card);
+error_kzalloc:
+error_ncaps:
+error_dma:
+ pci_disable_msi(pci);
+ pci_disable_device(pci);
+error:
+ return err;
+}
+
+static void whci_remove(struct pci_dev *pci)
+{
+ struct whci_card *card = pci_get_drvdata(pci);
+ int n;
+
+ pci_set_drvdata(pci, NULL);
+ /* Unregister each capability in reverse (so the master device
+ * is unregistered last). */
+ for (n = card->n_caps; n >= 0 ; n--)
+ whci_del_cap(card, n);
+ pci_iounmap(pci, card->uwbbase);
+ release_mem_region(pci_resource_start(pci, 0), UWBCAPDATA_SIZE(card->n_caps));
+ kfree(card);
+ pci_disable_msi(pci);
+ pci_disable_device(pci);
+}
+
+static struct pci_device_id whci_id_table[] = {
+ { PCI_DEVICE_CLASS(PCI_CLASS_WIRELESS_WHCI, ~0) },
+ { 0 },
+};
+MODULE_DEVICE_TABLE(pci, whci_id_table);
+
+
+static struct pci_driver whci_driver = {
+ .name = "whci",
+ .id_table = whci_id_table,
+ .probe = whci_probe,
+ .remove = whci_remove,
+};
+
+module_pci_driver(whci_driver);
+MODULE_DESCRIPTION("WHCI UWB Multi-interface Controller enumerator");
+MODULE_AUTHOR("Cambridge Silicon Radio Ltd.");
+MODULE_LICENSE("GPL");