diff options
Diffstat (limited to 'drivers/vme')
-rw-r--r-- | drivers/vme/bridges/vme_ca91cx42.c | 5 | ||||
-rw-r--r-- | drivers/vme/bridges/vme_tsi148.c | 172 | ||||
-rw-r--r-- | drivers/vme/vme.c | 90 | ||||
-rw-r--r-- | drivers/vme/vme_bridge.h | 25 |
4 files changed, 159 insertions, 133 deletions
diff --git a/drivers/vme/bridges/vme_ca91cx42.c b/drivers/vme/bridges/vme_ca91cx42.c index f692efcf6..b79a74a98 100644 --- a/drivers/vme/bridges/vme_ca91cx42.c +++ b/drivers/vme/bridges/vme_ca91cx42.c @@ -204,8 +204,7 @@ static int ca91cx42_irq_init(struct vme_bridge *ca91cx42_bridge) /* Need pdev */ pdev = container_of(ca91cx42_bridge->parent, struct pci_dev, dev); - /* Initialise list for VME bus errors */ - INIT_LIST_HEAD(&ca91cx42_bridge->vme_errors); + INIT_LIST_HEAD(&ca91cx42_bridge->vme_error_handlers); mutex_init(&ca91cx42_bridge->irq_mtx); @@ -554,7 +553,7 @@ static int ca91cx42_alloc_resource(struct vme_master_resource *image, image->bus_resource.flags = IORESOURCE_MEM; retval = pci_bus_alloc_resource(pdev->bus, - &image->bus_resource, size, size, PCIBIOS_MIN_MEM, + &image->bus_resource, size, 0x10000, PCIBIOS_MIN_MEM, 0, NULL, NULL); if (retval) { dev_err(ca91cx42_bridge->parent, "Failed to allocate mem " diff --git a/drivers/vme/bridges/vme_tsi148.c b/drivers/vme/bridges/vme_tsi148.c index fb1e7ad27..60524834d 100644 --- a/drivers/vme/bridges/vme_tsi148.c +++ b/drivers/vme/bridges/vme_tsi148.c @@ -169,7 +169,7 @@ static u32 tsi148_VERR_irqhandler(struct vme_bridge *tsi148_bridge) unsigned int error_addr_high, error_addr_low; unsigned long long error_addr; u32 error_attrib; - struct vme_bus_error *error = NULL; + int error_am; struct tsi148_driver *bridge; bridge = tsi148_bridge->driver_priv; @@ -177,6 +177,7 @@ static u32 tsi148_VERR_irqhandler(struct vme_bridge *tsi148_bridge) error_addr_high = ioread32be(bridge->base + TSI148_LCSR_VEAU); error_addr_low = ioread32be(bridge->base + TSI148_LCSR_VEAL); error_attrib = ioread32be(bridge->base + TSI148_LCSR_VEAT); + error_am = (error_attrib & TSI148_LCSR_VEAT_AM_M) >> 8; reg_join(error_addr_high, error_addr_low, &error_addr); @@ -186,23 +187,12 @@ static u32 tsi148_VERR_irqhandler(struct vme_bridge *tsi148_bridge) "Occurred\n"); } - if (err_chk) { - error = kmalloc(sizeof(struct vme_bus_error), GFP_ATOMIC); - if (error) { - error->address = error_addr; - error->attributes = error_attrib; - list_add_tail(&error->list, &tsi148_bridge->vme_errors); - } else { - dev_err(tsi148_bridge->parent, - "Unable to alloc memory for VMEbus Error reporting\n"); - } - } - - if (!error) { + if (err_chk) + vme_bus_error_handler(tsi148_bridge, error_addr, error_am); + else dev_err(tsi148_bridge->parent, "VME Bus Error at address: 0x%llx, attributes: %08x\n", error_addr, error_attrib); - } /* Clear Status */ iowrite32be(TSI148_LCSR_VEAT_VESCL, bridge->base + TSI148_LCSR_VEAT); @@ -324,8 +314,7 @@ static int tsi148_irq_init(struct vme_bridge *tsi148_bridge) bridge = tsi148_bridge->driver_priv; - /* Initialise list for VME bus errors */ - INIT_LIST_HEAD(&tsi148_bridge->vme_errors); + INIT_LIST_HEAD(&tsi148_bridge->vme_error_handlers); mutex_init(&tsi148_bridge->irq_mtx); @@ -483,73 +472,6 @@ static int tsi148_irq_generate(struct vme_bridge *tsi148_bridge, int level, } /* - * Find the first error in this address range - */ -static struct vme_bus_error *tsi148_find_error(struct vme_bridge *tsi148_bridge, - u32 aspace, unsigned long long address, size_t count) -{ - struct list_head *err_pos; - struct vme_bus_error *vme_err, *valid = NULL; - unsigned long long bound; - - bound = address + count; - - /* - * XXX We are currently not looking at the address space when parsing - * for errors. This is because parsing the Address Modifier Codes - * is going to be quite resource intensive to do properly. We - * should be OK just looking at the addresses and this is certainly - * much better than what we had before. - */ - err_pos = NULL; - /* Iterate through errors */ - list_for_each(err_pos, &tsi148_bridge->vme_errors) { - vme_err = list_entry(err_pos, struct vme_bus_error, list); - if ((vme_err->address >= address) && - (vme_err->address < bound)) { - - valid = vme_err; - break; - } - } - - return valid; -} - -/* - * Clear errors in the provided address range. - */ -static void tsi148_clear_errors(struct vme_bridge *tsi148_bridge, - u32 aspace, unsigned long long address, size_t count) -{ - struct list_head *err_pos, *temp; - struct vme_bus_error *vme_err; - unsigned long long bound; - - bound = address + count; - - /* - * XXX We are currently not looking at the address space when parsing - * for errors. This is because parsing the Address Modifier Codes - * is going to be quite resource intensive to do properly. We - * should be OK just looking at the addresses and this is certainly - * much better than what we had before. - */ - err_pos = NULL; - /* Iterate through errors */ - list_for_each_safe(err_pos, temp, &tsi148_bridge->vme_errors) { - vme_err = list_entry(err_pos, struct vme_bus_error, list); - - if ((vme_err->address >= address) && - (vme_err->address < bound)) { - - list_del(err_pos); - kfree(vme_err); - } - } -} - -/* * Initialize a slave window with the requested attributes. */ static int tsi148_slave_set(struct vme_slave_resource *image, int enabled, @@ -846,7 +768,7 @@ static int tsi148_alloc_resource(struct vme_master_resource *image, image->bus_resource.flags = IORESOURCE_MEM; retval = pci_bus_alloc_resource(pdev->bus, - &image->bus_resource, size, size, PCIBIOS_MIN_MEM, + &image->bus_resource, size, 0x10000, PCIBIOS_MIN_MEM, 0, NULL, NULL); if (retval) { dev_err(tsi148_bridge->parent, "Failed to allocate mem " @@ -1264,7 +1186,7 @@ static ssize_t tsi148_master_read(struct vme_master_resource *image, void *buf, int retval, enabled; unsigned long long vme_base, size; u32 aspace, cycle, dwidth; - struct vme_bus_error *vme_err = NULL; + struct vme_error_handler *handler = NULL; struct vme_bridge *tsi148_bridge; void __iomem *addr = image->kern_base + offset; unsigned int done = 0; @@ -1274,6 +1196,17 @@ static ssize_t tsi148_master_read(struct vme_master_resource *image, void *buf, spin_lock(&image->lock); + if (err_chk) { + __tsi148_master_get(image, &enabled, &vme_base, &size, &aspace, + &cycle, &dwidth); + handler = vme_register_error_handler(tsi148_bridge, aspace, + vme_base + offset, count); + if (!handler) { + spin_unlock(&image->lock); + return -ENOMEM; + } + } + /* The following code handles VME address alignment. We cannot use * memcpy_xxx here because it may cut data transfers in to 8-bit * cycles when D16 or D32 cycles are required on the VME bus. @@ -1317,24 +1250,16 @@ static ssize_t tsi148_master_read(struct vme_master_resource *image, void *buf, out: retval = count; - if (!err_chk) - goto skip_chk; - - __tsi148_master_get(image, &enabled, &vme_base, &size, &aspace, &cycle, - &dwidth); - - vme_err = tsi148_find_error(tsi148_bridge, aspace, vme_base + offset, - count); - if (vme_err != NULL) { - dev_err(image->parent->parent, "First VME read error detected " - "an at address 0x%llx\n", vme_err->address); - retval = vme_err->address - (vme_base + offset); - /* Clear down save errors in this address range */ - tsi148_clear_errors(tsi148_bridge, aspace, vme_base + offset, - count); + if (err_chk) { + if (handler->num_errors) { + dev_err(image->parent->parent, + "First VME read error detected an at address 0x%llx\n", + handler->first_error); + retval = handler->first_error - (vme_base + offset); + } + vme_unregister_error_handler(handler); } -skip_chk: spin_unlock(&image->lock); return retval; @@ -1351,7 +1276,7 @@ static ssize_t tsi148_master_write(struct vme_master_resource *image, void *buf, unsigned int done = 0; unsigned int count32; - struct vme_bus_error *vme_err = NULL; + struct vme_error_handler *handler = NULL; struct vme_bridge *tsi148_bridge; struct tsi148_driver *bridge; @@ -1361,6 +1286,17 @@ static ssize_t tsi148_master_write(struct vme_master_resource *image, void *buf, spin_lock(&image->lock); + if (err_chk) { + __tsi148_master_get(image, &enabled, &vme_base, &size, &aspace, + &cycle, &dwidth); + handler = vme_register_error_handler(tsi148_bridge, aspace, + vme_base + offset, count); + if (!handler) { + spin_unlock(&image->lock); + return -ENOMEM; + } + } + /* Here we apply for the same strategy we do in master_read * function in order to assure the correct cycles. */ @@ -1410,30 +1346,18 @@ out: * We check for saved errors in the written address range/space. */ - if (!err_chk) - goto skip_chk; - - /* - * Get window info first, to maximise the time that the buffers may - * fluch on their own - */ - __tsi148_master_get(image, &enabled, &vme_base, &size, &aspace, &cycle, - &dwidth); - - ioread16(bridge->flush_image->kern_base + 0x7F000); + if (err_chk) { + ioread16(bridge->flush_image->kern_base + 0x7F000); - vme_err = tsi148_find_error(tsi148_bridge, aspace, vme_base + offset, - count); - if (vme_err != NULL) { - dev_warn(tsi148_bridge->parent, "First VME write error detected" - " an at address 0x%llx\n", vme_err->address); - retval = vme_err->address - (vme_base + offset); - /* Clear down save errors in this address range */ - tsi148_clear_errors(tsi148_bridge, aspace, vme_base + offset, - count); + if (handler->num_errors) { + dev_warn(tsi148_bridge->parent, + "First VME write error detected an at address 0x%llx\n", + handler->first_error); + retval = handler->first_error - (vme_base + offset); + } + vme_unregister_error_handler(handler); } -skip_chk: spin_unlock(&image->lock); return retval; diff --git a/drivers/vme/vme.c b/drivers/vme/vme.c index 56708915e..72924b063 100644 --- a/drivers/vme/vme.c +++ b/drivers/vme/vme.c @@ -223,6 +223,39 @@ int vme_check_window(u32 aspace, unsigned long long vme_base, } EXPORT_SYMBOL(vme_check_window); +static u32 vme_get_aspace(int am) +{ + switch (am) { + case 0x29: + case 0x2D: + return VME_A16; + case 0x38: + case 0x39: + case 0x3A: + case 0x3B: + case 0x3C: + case 0x3D: + case 0x3E: + case 0x3F: + return VME_A24; + case 0x8: + case 0x9: + case 0xA: + case 0xB: + case 0xC: + case 0xD: + case 0xE: + case 0xF: + return VME_A32; + case 0x0: + case 0x1: + case 0x3: + return VME_A64; + } + + return 0; +} + /* * Request a slave image with specific attributes, return some unique * identifier. @@ -990,6 +1023,63 @@ int vme_dma_free(struct vme_resource *resource) } EXPORT_SYMBOL(vme_dma_free); +void vme_bus_error_handler(struct vme_bridge *bridge, + unsigned long long address, int am) +{ + struct list_head *handler_pos = NULL; + struct vme_error_handler *handler; + int handler_triggered = 0; + u32 aspace = vme_get_aspace(am); + + list_for_each(handler_pos, &bridge->vme_error_handlers) { + handler = list_entry(handler_pos, struct vme_error_handler, + list); + if ((aspace == handler->aspace) && + (address >= handler->start) && + (address < handler->end)) { + if (!handler->num_errors) + handler->first_error = address; + if (handler->num_errors != UINT_MAX) + handler->num_errors++; + handler_triggered = 1; + } + } + + if (!handler_triggered) + dev_err(bridge->parent, + "Unhandled VME access error at address 0x%llx\n", + address); +} +EXPORT_SYMBOL(vme_bus_error_handler); + +struct vme_error_handler *vme_register_error_handler( + struct vme_bridge *bridge, u32 aspace, + unsigned long long address, size_t len) +{ + struct vme_error_handler *handler; + + handler = kmalloc(sizeof(*handler), GFP_KERNEL); + if (!handler) + return NULL; + + handler->aspace = aspace; + handler->start = address; + handler->end = address + len; + handler->num_errors = 0; + handler->first_error = 0; + list_add_tail(&handler->list, &bridge->vme_error_handlers); + + return handler; +} +EXPORT_SYMBOL(vme_register_error_handler); + +void vme_unregister_error_handler(struct vme_error_handler *handler) +{ + list_del(&handler->list); + kfree(handler); +} +EXPORT_SYMBOL(vme_unregister_error_handler); + void vme_irq_handler(struct vme_bridge *bridge, int level, int statid) { void (*call)(int, int, void *); diff --git a/drivers/vme/vme_bridge.h b/drivers/vme/vme_bridge.h index 934949abd..b59cbee23 100644 --- a/drivers/vme/vme_bridge.h +++ b/drivers/vme/vme_bridge.h @@ -1,6 +1,8 @@ #ifndef _VME_BRIDGE_H_ #define _VME_BRIDGE_H_ +#include <linux/vme.h> + #define VME_CRCSR_BUF_SIZE (508*1024) /* * Resource structures @@ -75,10 +77,13 @@ struct vme_lm_resource { int monitors; }; -struct vme_bus_error { +struct vme_error_handler { struct list_head list; - unsigned long long address; - u32 attributes; + unsigned long long start; /* Beginning of error window */ + unsigned long long end; /* End of error window */ + unsigned long long first_error; /* Address of the first error */ + u32 aspace; /* Address space of error window*/ + unsigned num_errors; /* Number of errors */ }; struct vme_callback { @@ -88,7 +93,7 @@ struct vme_callback { struct vme_irq { int count; - struct vme_callback callback[255]; + struct vme_callback callback[VME_NUM_STATUSID]; }; /* Allow 16 characters for name (including null character) */ @@ -106,8 +111,10 @@ struct vme_bridge { struct list_head dma_resources; struct list_head lm_resources; - struct list_head vme_errors; /* List for errors generated on VME */ - struct list_head devices; /* List of devices on this bridge */ + /* List for registered errors handlers */ + struct list_head vme_error_handlers; + /* List of devices on this bridge */ + struct list_head devices; /* Bridge Info - XXX Move to private structure? */ struct device *parent; /* Parent device (eg. pdev->dev for PCI) */ @@ -166,9 +173,15 @@ struct vme_bridge { void *vaddr, dma_addr_t dma); }; +void vme_bus_error_handler(struct vme_bridge *bridge, + unsigned long long address, int am); void vme_irq_handler(struct vme_bridge *, int, int); int vme_register_bridge(struct vme_bridge *); void vme_unregister_bridge(struct vme_bridge *); +struct vme_error_handler *vme_register_error_handler( + struct vme_bridge *bridge, u32 aspace, + unsigned long long address, size_t len); +void vme_unregister_error_handler(struct vme_error_handler *handler); #endif /* _VME_BRIDGE_H_ */ |