diff options
Diffstat (limited to 'drivers/watchdog/f71808e_wdt.c')
| -rw-r--r-- | drivers/watchdog/f71808e_wdt.c | 28 |
1 files changed, 26 insertions, 2 deletions
diff --git a/drivers/watchdog/f71808e_wdt.c b/drivers/watchdog/f71808e_wdt.c index d4ba262da..1b7e91690 100644 --- a/drivers/watchdog/f71808e_wdt.c +++ b/drivers/watchdog/f71808e_wdt.c @@ -45,9 +45,11 @@ #define SIO_REG_DEVREV 0x22 /* Device revision */ #define SIO_REG_MANID 0x23 /* Fintek ID (2 bytes) */ #define SIO_REG_ROM_ADDR_SEL 0x27 /* ROM address select */ +#define SIO_F81866_REG_PORT_SEL 0x27 /* F81866 Multi-Function Register */ #define SIO_REG_MFUNCT1 0x29 /* Multi function select 1 */ #define SIO_REG_MFUNCT2 0x2a /* Multi function select 2 */ #define SIO_REG_MFUNCT3 0x2b /* Multi function select 3 */ +#define SIO_F81866_REG_GPIO1 0x2c /* F81866 GPIO1 Enable Register */ #define SIO_REG_ENABLE 0x30 /* Logical device enable */ #define SIO_REG_ADDR 0x60 /* Logical device address (2 bytes) */ @@ -60,6 +62,7 @@ #define SIO_F71882_ID 0x0541 /* Chipset ID */ #define SIO_F71889_ID 0x0723 /* Chipset ID */ #define SIO_F81865_ID 0x0704 /* Chipset ID */ +#define SIO_F81866_ID 0x1010 /* Chipset ID */ #define F71808FG_REG_WDO_CONF 0xf0 #define F71808FG_REG_WDT_CONF 0xf5 @@ -116,7 +119,8 @@ module_param(start_withtimeout, uint, 0); MODULE_PARM_DESC(start_withtimeout, "Start watchdog timer on module load with" " given initial timeout. Zero (default) disables this feature."); -enum chips { f71808fg, f71858fg, f71862fg, f71869, f71882fg, f71889fg, f81865 }; +enum chips { f71808fg, f71858fg, f71862fg, f71869, f71882fg, f71889fg, f81865, + f81866}; static const char *f71808e_names[] = { "f71808fg", @@ -126,6 +130,7 @@ static const char *f71808e_names[] = { "f71882fg", "f71889fg", "f81865", + "f81866", }; /* Super-I/O Function prototypes */ @@ -370,6 +375,22 @@ static int watchdog_start(void) superio_clear_bit(watchdog.sioaddr, SIO_REG_MFUNCT3, 5); break; + case f81866: + /* Set pin 70 to WDTRST# */ + superio_clear_bit(watchdog.sioaddr, SIO_F81866_REG_PORT_SEL, + BIT(3) | BIT(0)); + superio_set_bit(watchdog.sioaddr, SIO_F81866_REG_PORT_SEL, + BIT(2)); + /* + * GPIO1 Control Register when 27h BIT3:2 = 01 & BIT0 = 0. + * The PIN 70(GPIO15/WDTRST) is controlled by 2Ch: + * BIT5: 0 -> WDTRST# + * 1 -> GPIO15 + */ + superio_clear_bit(watchdog.sioaddr, SIO_F81866_REG_GPIO1, + BIT(5)); + break; + default: /* * 'default' label to shut up the compiler and catch @@ -382,7 +403,7 @@ static int watchdog_start(void) superio_select(watchdog.sioaddr, SIO_F71808FG_LD_WDT); superio_set_bit(watchdog.sioaddr, SIO_REG_ENABLE, 0); - if (watchdog.type == f81865) + if (watchdog.type == f81865 || watchdog.type == f81866) superio_set_bit(watchdog.sioaddr, F81865_REG_WDO_CONF, F81865_FLAG_WDOUT_EN); else @@ -788,6 +809,9 @@ static int __init f71808e_find(int sioaddr) case SIO_F81865_ID: watchdog.type = f81865; break; + case SIO_F81866_ID: + watchdog.type = f81866; + break; default: pr_info("Unrecognized Fintek device: %04x\n", (unsigned int)devid); |