diff options
Diffstat (limited to 'include/linux/clk-provider.h')
| -rw-r--r-- | include/linux/clk-provider.h | 698 |
1 files changed, 698 insertions, 0 deletions
diff --git a/include/linux/clk-provider.h b/include/linux/clk-provider.h new file mode 100644 index 000000000..df695313f --- /dev/null +++ b/include/linux/clk-provider.h @@ -0,0 +1,698 @@ +/* + * linux/include/linux/clk-provider.h + * + * Copyright (c) 2010-2011 Jeremy Kerr <jeremy.kerr@canonical.com> + * Copyright (C) 2011-2012 Linaro Ltd <mturquette@linaro.org> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef __LINUX_CLK_PROVIDER_H +#define __LINUX_CLK_PROVIDER_H + +#include <linux/clk.h> +#include <linux/io.h> +#include <linux/of.h> + +#ifdef CONFIG_COMMON_CLK + +/* + * flags used across common struct clk. these flags should only affect the + * top-level framework. custom flags for dealing with hardware specifics + * belong in struct clk_foo + */ +#define CLK_SET_RATE_GATE BIT(0) /* must be gated across rate change */ +#define CLK_SET_PARENT_GATE BIT(1) /* must be gated across re-parent */ +#define CLK_SET_RATE_PARENT BIT(2) /* propagate rate change up one level */ +#define CLK_IGNORE_UNUSED BIT(3) /* do not gate even if unused */ +#define CLK_IS_ROOT BIT(4) /* root clk, has no parent */ +#define CLK_IS_BASIC BIT(5) /* Basic clk, can't do a to_clk_foo() */ +#define CLK_GET_RATE_NOCACHE BIT(6) /* do not use the cached clk rate */ +#define CLK_SET_RATE_NO_REPARENT BIT(7) /* don't re-parent on rate change */ +#define CLK_GET_ACCURACY_NOCACHE BIT(8) /* do not use the cached clk accuracy */ + +struct clk_hw; +struct clk_core; +struct dentry; + +/** + * struct clk_ops - Callback operations for hardware clocks; these are to + * be provided by the clock implementation, and will be called by drivers + * through the clk_* api. + * + * @prepare: Prepare the clock for enabling. This must not return until + * the clock is fully prepared, and it's safe to call clk_enable. + * This callback is intended to allow clock implementations to + * do any initialisation that may sleep. Called with + * prepare_lock held. + * + * @unprepare: Release the clock from its prepared state. This will typically + * undo any work done in the @prepare callback. Called with + * prepare_lock held. + * + * @is_prepared: Queries the hardware to determine if the clock is prepared. + * This function is allowed to sleep. Optional, if this op is not + * set then the prepare count will be used. + * + * @unprepare_unused: Unprepare the clock atomically. Only called from + * clk_disable_unused for prepare clocks with special needs. + * Called with prepare mutex held. This function may sleep. + * + * @enable: Enable the clock atomically. This must not return until the + * clock is generating a valid clock signal, usable by consumer + * devices. Called with enable_lock held. This function must not + * sleep. + * + * @disable: Disable the clock atomically. Called with enable_lock held. + * This function must not sleep. + * + * @is_enabled: Queries the hardware to determine if the clock is enabled. + * This function must not sleep. Optional, if this op is not + * set then the enable count will be used. + * + * @disable_unused: Disable the clock atomically. Only called from + * clk_disable_unused for gate clocks with special needs. + * Called with enable_lock held. This function must not + * sleep. + * + * @recalc_rate Recalculate the rate of this clock, by querying hardware. The + * parent rate is an input parameter. It is up to the caller to + * ensure that the prepare_mutex is held across this call. + * Returns the calculated rate. Optional, but recommended - if + * this op is not set then clock rate will be initialized to 0. + * + * @round_rate: Given a target rate as input, returns the closest rate actually + * supported by the clock. The parent rate is an input/output + * parameter. + * + * @determine_rate: Given a target rate as input, returns the closest rate + * actually supported by the clock, and optionally the parent clock + * that should be used to provide the clock rate. + * + * @set_parent: Change the input source of this clock; for clocks with multiple + * possible parents specify a new parent by passing in the index + * as a u8 corresponding to the parent in either the .parent_names + * or .parents arrays. This function in affect translates an + * array index into the value programmed into the hardware. + * Returns 0 on success, -EERROR otherwise. + * + * @get_parent: Queries the hardware to determine the parent of a clock. The + * return value is a u8 which specifies the index corresponding to + * the parent clock. This index can be applied to either the + * .parent_names or .parents arrays. In short, this function + * translates the parent value read from hardware into an array + * index. Currently only called when the clock is initialized by + * __clk_init. This callback is mandatory for clocks with + * multiple parents. It is optional (and unnecessary) for clocks + * with 0 or 1 parents. + * + * @set_rate: Change the rate of this clock. The requested rate is specified + * by the second argument, which should typically be the return + * of .round_rate call. The third argument gives the parent rate + * which is likely helpful for most .set_rate implementation. + * Returns 0 on success, -EERROR otherwise. + * + * @set_rate_and_parent: Change the rate and the parent of this clock. The + * requested rate is specified by the second argument, which + * should typically be the return of .round_rate call. The + * third argument gives the parent rate which is likely helpful + * for most .set_rate_and_parent implementation. The fourth + * argument gives the parent index. This callback is optional (and + * unnecessary) for clocks with 0 or 1 parents as well as + * for clocks that can tolerate switching the rate and the parent + * separately via calls to .set_parent and .set_rate. + * Returns 0 on success, -EERROR otherwise. + * + * @recalc_accuracy: Recalculate the accuracy of this clock. The clock accuracy + * is expressed in ppb (parts per billion). The parent accuracy is + * an input parameter. + * Returns the calculated accuracy. Optional - if this op is not + * set then clock accuracy will be initialized to parent accuracy + * or 0 (perfect clock) if clock has no parent. + * + * @get_phase: Queries the hardware to get the current phase of a clock. + * Returned values are 0-359 degrees on success, negative + * error codes on failure. + * + * @set_phase: Shift the phase this clock signal in degrees specified + * by the second argument. Valid values for degrees are + * 0-359. Return 0 on success, otherwise -EERROR. + * + * @init: Perform platform-specific initialization magic. + * This is not not used by any of the basic clock types. + * Please consider other ways of solving initialization problems + * before using this callback, as its use is discouraged. + * + * @debug_init: Set up type-specific debugfs entries for this clock. This + * is called once, after the debugfs directory entry for this + * clock has been created. The dentry pointer representing that + * directory is provided as an argument. Called with + * prepare_lock held. Returns 0 on success, -EERROR otherwise. + * + * + * The clk_enable/clk_disable and clk_prepare/clk_unprepare pairs allow + * implementations to split any work between atomic (enable) and sleepable + * (prepare) contexts. If enabling a clock requires code that might sleep, + * this must be done in clk_prepare. Clock enable code that will never be + * called in a sleepable context may be implemented in clk_enable. + * + * Typically, drivers will call clk_prepare when a clock may be needed later + * (eg. when a device is opened), and clk_enable when the clock is actually + * required (eg. from an interrupt). Note that clk_prepare MUST have been + * called before clk_enable. + */ +struct clk_ops { + int (*prepare)(struct clk_hw *hw); + void (*unprepare)(struct clk_hw *hw); + int (*is_prepared)(struct clk_hw *hw); + void (*unprepare_unused)(struct clk_hw *hw); + int (*enable)(struct clk_hw *hw); + void (*disable)(struct clk_hw *hw); + int (*is_enabled)(struct clk_hw *hw); + void (*disable_unused)(struct clk_hw *hw); + unsigned long (*recalc_rate)(struct clk_hw *hw, + unsigned long parent_rate); + long (*round_rate)(struct clk_hw *hw, unsigned long rate, + unsigned long *parent_rate); + long (*determine_rate)(struct clk_hw *hw, + unsigned long rate, + unsigned long min_rate, + unsigned long max_rate, + unsigned long *best_parent_rate, + struct clk_hw **best_parent_hw); + int (*set_parent)(struct clk_hw *hw, u8 index); + u8 (*get_parent)(struct clk_hw *hw); + int (*set_rate)(struct clk_hw *hw, unsigned long rate, + unsigned long parent_rate); + int (*set_rate_and_parent)(struct clk_hw *hw, + unsigned long rate, + unsigned long parent_rate, u8 index); + unsigned long (*recalc_accuracy)(struct clk_hw *hw, + unsigned long parent_accuracy); + int (*get_phase)(struct clk_hw *hw); + int (*set_phase)(struct clk_hw *hw, int degrees); + void (*init)(struct clk_hw *hw); + int (*debug_init)(struct clk_hw *hw, struct dentry *dentry); +}; + +/** + * struct clk_init_data - holds init data that's common to all clocks and is + * shared between the clock provider and the common clock framework. + * + * @name: clock name + * @ops: operations this clock supports + * @parent_names: array of string names for all possible parents + * @num_parents: number of possible parents + * @flags: framework-level hints and quirks + */ +struct clk_init_data { + const char *name; + const struct clk_ops *ops; + const char **parent_names; + u8 num_parents; + unsigned long flags; +}; + +/** + * struct clk_hw - handle for traversing from a struct clk to its corresponding + * hardware-specific structure. struct clk_hw should be declared within struct + * clk_foo and then referenced by the struct clk instance that uses struct + * clk_foo's clk_ops + * + * @core: pointer to the struct clk_core instance that points back to this + * struct clk_hw instance + * + * @clk: pointer to the per-user struct clk instance that can be used to call + * into the clk API + * + * @init: pointer to struct clk_init_data that contains the init data shared + * with the common clock framework. + */ +struct clk_hw { + struct clk_core *core; + struct clk *clk; + const struct clk_init_data *init; +}; + +/* + * DOC: Basic clock implementations common to many platforms + * + * Each basic clock hardware type is comprised of a structure describing the + * clock hardware, implementations of the relevant callbacks in struct clk_ops, + * unique flags for that hardware type, a registration function and an + * alternative macro for static initialization + */ + +/** + * struct clk_fixed_rate - fixed-rate clock + * @hw: handle between common and hardware-specific interfaces + * @fixed_rate: constant frequency of clock + */ +struct clk_fixed_rate { + struct clk_hw hw; + unsigned long fixed_rate; + unsigned long fixed_accuracy; + u8 flags; +}; + +extern const struct clk_ops clk_fixed_rate_ops; +struct clk *clk_register_fixed_rate(struct device *dev, const char *name, + const char *parent_name, unsigned long flags, + unsigned long fixed_rate); +struct clk *clk_register_fixed_rate_with_accuracy(struct device *dev, + const char *name, const char *parent_name, unsigned long flags, + unsigned long fixed_rate, unsigned long fixed_accuracy); + +void of_fixed_clk_setup(struct device_node *np); + +/** + * struct clk_gate - gating clock + * + * @hw: handle between common and hardware-specific interfaces + * @reg: register controlling gate + * @bit_idx: single bit controlling gate + * @flags: hardware-specific flags + * @lock: register lock + * + * Clock which can gate its output. Implements .enable & .disable + * + * Flags: + * CLK_GATE_SET_TO_DISABLE - by default this clock sets the bit at bit_idx to + * enable the clock. Setting this flag does the opposite: setting the bit + * disable the clock and clearing it enables the clock + * CLK_GATE_HIWORD_MASK - The gate settings are only in lower 16-bit + * of this register, and mask of gate bits are in higher 16-bit of this + * register. While setting the gate bits, higher 16-bit should also be + * updated to indicate changing gate bits. + */ +struct clk_gate { + struct clk_hw hw; + void __iomem *reg; + u8 bit_idx; + u8 flags; + spinlock_t *lock; +}; + +#define CLK_GATE_SET_TO_DISABLE BIT(0) +#define CLK_GATE_HIWORD_MASK BIT(1) + +extern const struct clk_ops clk_gate_ops; +struct clk *clk_register_gate(struct device *dev, const char *name, + const char *parent_name, unsigned long flags, + void __iomem *reg, u8 bit_idx, + u8 clk_gate_flags, spinlock_t *lock); +void clk_unregister_gate(struct clk *clk); + +struct clk_div_table { + unsigned int val; + unsigned int div; +}; + +/** + * struct clk_divider - adjustable divider clock + * + * @hw: handle between common and hardware-specific interfaces + * @reg: register containing the divider + * @shift: shift to the divider bit field + * @width: width of the divider bit field + * @table: array of value/divider pairs, last entry should have div = 0 + * @lock: register lock + * + * Clock with an adjustable divider affecting its output frequency. Implements + * .recalc_rate, .set_rate and .round_rate + * + * Flags: + * CLK_DIVIDER_ONE_BASED - by default the divisor is the value read from the + * register plus one. If CLK_DIVIDER_ONE_BASED is set then the divider is + * the raw value read from the register, with the value of zero considered + * invalid, unless CLK_DIVIDER_ALLOW_ZERO is set. + * CLK_DIVIDER_POWER_OF_TWO - clock divisor is 2 raised to the value read from + * the hardware register + * CLK_DIVIDER_ALLOW_ZERO - Allow zero divisors. For dividers which have + * CLK_DIVIDER_ONE_BASED set, it is possible to end up with a zero divisor. + * Some hardware implementations gracefully handle this case and allow a + * zero divisor by not modifying their input clock + * (divide by one / bypass). + * CLK_DIVIDER_HIWORD_MASK - The divider settings are only in lower 16-bit + * of this register, and mask of divider bits are in higher 16-bit of this + * register. While setting the divider bits, higher 16-bit should also be + * updated to indicate changing divider bits. + * CLK_DIVIDER_ROUND_CLOSEST - Makes the best calculated divider to be rounded + * to the closest integer instead of the up one. + * CLK_DIVIDER_READ_ONLY - The divider settings are preconfigured and should + * not be changed by the clock framework. + */ +struct clk_divider { + struct clk_hw hw; + void __iomem *reg; + u8 shift; + u8 width; + u8 flags; + const struct clk_div_table *table; + spinlock_t *lock; +}; + +#define CLK_DIVIDER_ONE_BASED BIT(0) +#define CLK_DIVIDER_POWER_OF_TWO BIT(1) +#define CLK_DIVIDER_ALLOW_ZERO BIT(2) +#define CLK_DIVIDER_HIWORD_MASK BIT(3) +#define CLK_DIVIDER_ROUND_CLOSEST BIT(4) +#define CLK_DIVIDER_READ_ONLY BIT(5) + +extern const struct clk_ops clk_divider_ops; + +unsigned long divider_recalc_rate(struct clk_hw *hw, unsigned long parent_rate, + unsigned int val, const struct clk_div_table *table, + unsigned long flags); +long divider_round_rate(struct clk_hw *hw, unsigned long rate, + unsigned long *prate, const struct clk_div_table *table, + u8 width, unsigned long flags); +int divider_get_val(unsigned long rate, unsigned long parent_rate, + const struct clk_div_table *table, u8 width, + unsigned long flags); + +struct clk *clk_register_divider(struct device *dev, const char *name, + const char *parent_name, unsigned long flags, + void __iomem *reg, u8 shift, u8 width, + u8 clk_divider_flags, spinlock_t *lock); +struct clk *clk_register_divider_table(struct device *dev, const char *name, + const char *parent_name, unsigned long flags, + void __iomem *reg, u8 shift, u8 width, + u8 clk_divider_flags, const struct clk_div_table *table, + spinlock_t *lock); +void clk_unregister_divider(struct clk *clk); + +/** + * struct clk_mux - multiplexer clock + * + * @hw: handle between common and hardware-specific interfaces + * @reg: register controlling multiplexer + * @shift: shift to multiplexer bit field + * @width: width of mutliplexer bit field + * @flags: hardware-specific flags + * @lock: register lock + * + * Clock with multiple selectable parents. Implements .get_parent, .set_parent + * and .recalc_rate + * + * Flags: + * CLK_MUX_INDEX_ONE - register index starts at 1, not 0 + * CLK_MUX_INDEX_BIT - register index is a single bit (power of two) + * CLK_MUX_HIWORD_MASK - The mux settings are only in lower 16-bit of this + * register, and mask of mux bits are in higher 16-bit of this register. + * While setting the mux bits, higher 16-bit should also be updated to + * indicate changing mux bits. + * CLK_MUX_ROUND_CLOSEST - Use the parent rate that is closest to the desired + * frequency. + */ +struct clk_mux { + struct clk_hw hw; + void __iomem *reg; + u32 *table; + u32 mask; + u8 shift; + u8 flags; + spinlock_t *lock; +}; + +#define CLK_MUX_INDEX_ONE BIT(0) +#define CLK_MUX_INDEX_BIT BIT(1) +#define CLK_MUX_HIWORD_MASK BIT(2) +#define CLK_MUX_READ_ONLY BIT(3) /* mux can't be changed */ +#define CLK_MUX_ROUND_CLOSEST BIT(4) + +extern const struct clk_ops clk_mux_ops; +extern const struct clk_ops clk_mux_ro_ops; + +struct clk *clk_register_mux(struct device *dev, const char *name, + const char **parent_names, u8 num_parents, unsigned long flags, + void __iomem *reg, u8 shift, u8 width, + u8 clk_mux_flags, spinlock_t *lock); + +struct clk *clk_register_mux_table(struct device *dev, const char *name, + const char **parent_names, u8 num_parents, unsigned long flags, + void __iomem *reg, u8 shift, u32 mask, + u8 clk_mux_flags, u32 *table, spinlock_t *lock); + +void clk_unregister_mux(struct clk *clk); + +void of_fixed_factor_clk_setup(struct device_node *node); + +/** + * struct clk_fixed_factor - fixed multiplier and divider clock + * + * @hw: handle between common and hardware-specific interfaces + * @mult: multiplier + * @div: divider + * + * Clock with a fixed multiplier and divider. The output frequency is the + * parent clock rate divided by div and multiplied by mult. + * Implements .recalc_rate, .set_rate and .round_rate + */ + +struct clk_fixed_factor { + struct clk_hw hw; + unsigned int mult; + unsigned int div; +}; + +extern struct clk_ops clk_fixed_factor_ops; +struct clk *clk_register_fixed_factor(struct device *dev, const char *name, + const char *parent_name, unsigned long flags, + unsigned int mult, unsigned int div); + +/** + * struct clk_fractional_divider - adjustable fractional divider clock + * + * @hw: handle between common and hardware-specific interfaces + * @reg: register containing the divider + * @mshift: shift to the numerator bit field + * @mwidth: width of the numerator bit field + * @nshift: shift to the denominator bit field + * @nwidth: width of the denominator bit field + * @lock: register lock + * + * Clock with adjustable fractional divider affecting its output frequency. + */ + +struct clk_fractional_divider { + struct clk_hw hw; + void __iomem *reg; + u8 mshift; + u32 mmask; + u8 nshift; + u32 nmask; + u8 flags; + spinlock_t *lock; +}; + +extern const struct clk_ops clk_fractional_divider_ops; +struct clk *clk_register_fractional_divider(struct device *dev, + const char *name, const char *parent_name, unsigned long flags, + void __iomem *reg, u8 mshift, u8 mwidth, u8 nshift, u8 nwidth, + u8 clk_divider_flags, spinlock_t *lock); + +/*** + * struct clk_composite - aggregate clock of mux, divider and gate clocks + * + * @hw: handle between common and hardware-specific interfaces + * @mux_hw: handle between composite and hardware-specific mux clock + * @rate_hw: handle between composite and hardware-specific rate clock + * @gate_hw: handle between composite and hardware-specific gate clock + * @mux_ops: clock ops for mux + * @rate_ops: clock ops for rate + * @gate_ops: clock ops for gate + */ +struct clk_composite { + struct clk_hw hw; + struct clk_ops ops; + + struct clk_hw *mux_hw; + struct clk_hw *rate_hw; + struct clk_hw *gate_hw; + + const struct clk_ops *mux_ops; + const struct clk_ops *rate_ops; + const struct clk_ops *gate_ops; +}; + +struct clk *clk_register_composite(struct device *dev, const char *name, + const char **parent_names, int num_parents, + struct clk_hw *mux_hw, const struct clk_ops *mux_ops, + struct clk_hw *rate_hw, const struct clk_ops *rate_ops, + struct clk_hw *gate_hw, const struct clk_ops *gate_ops, + unsigned long flags); + +/*** + * struct clk_gpio_gate - gpio gated clock + * + * @hw: handle between common and hardware-specific interfaces + * @gpiod: gpio descriptor + * + * Clock with a gpio control for enabling and disabling the parent clock. + * Implements .enable, .disable and .is_enabled + */ + +struct clk_gpio { + struct clk_hw hw; + struct gpio_desc *gpiod; +}; + +extern const struct clk_ops clk_gpio_gate_ops; +struct clk *clk_register_gpio_gate(struct device *dev, const char *name, + const char *parent_name, unsigned gpio, bool active_low, + unsigned long flags); + +void of_gpio_clk_gate_setup(struct device_node *node); + +/** + * clk_register - allocate a new clock, register it and return an opaque cookie + * @dev: device that is registering this clock + * @hw: link to hardware-specific clock data + * + * clk_register is the primary interface for populating the clock tree with new + * clock nodes. It returns a pointer to the newly allocated struct clk which + * cannot be dereferenced by driver code but may be used in conjuction with the + * rest of the clock API. In the event of an error clk_register will return an + * error code; drivers must test for an error code after calling clk_register. + */ +struct clk *clk_register(struct device *dev, struct clk_hw *hw); +struct clk *devm_clk_register(struct device *dev, struct clk_hw *hw); + +void clk_unregister(struct clk *clk); +void devm_clk_unregister(struct device *dev, struct clk *clk); + +/* helper functions */ +const char *__clk_get_name(struct clk *clk); +struct clk_hw *__clk_get_hw(struct clk *clk); +u8 __clk_get_num_parents(struct clk *clk); +struct clk *__clk_get_parent(struct clk *clk); +struct clk *clk_get_parent_by_index(struct clk *clk, u8 index); +unsigned int __clk_get_enable_count(struct clk *clk); +unsigned long __clk_get_rate(struct clk *clk); +unsigned long __clk_get_flags(struct clk *clk); +bool __clk_is_prepared(struct clk *clk); +bool __clk_is_enabled(struct clk *clk); +struct clk *__clk_lookup(const char *name); +long __clk_mux_determine_rate(struct clk_hw *hw, unsigned long rate, + unsigned long min_rate, + unsigned long max_rate, + unsigned long *best_parent_rate, + struct clk_hw **best_parent_p); +unsigned long __clk_determine_rate(struct clk_hw *core, + unsigned long rate, + unsigned long min_rate, + unsigned long max_rate); +long __clk_mux_determine_rate_closest(struct clk_hw *hw, unsigned long rate, + unsigned long min_rate, + unsigned long max_rate, + unsigned long *best_parent_rate, + struct clk_hw **best_parent_p); + +static inline void __clk_hw_set_clk(struct clk_hw *dst, struct clk_hw *src) +{ + dst->clk = src->clk; + dst->core = src->core; +} + +/* + * FIXME clock api without lock protection + */ +unsigned long __clk_round_rate(struct clk *clk, unsigned long rate); + +struct of_device_id; + +typedef void (*of_clk_init_cb_t)(struct device_node *); + +struct clk_onecell_data { + struct clk **clks; + unsigned int clk_num; +}; + +extern struct of_device_id __clk_of_table; + +#define CLK_OF_DECLARE(name, compat, fn) OF_DECLARE_1(clk, name, compat, fn) + +#ifdef CONFIG_OF +int of_clk_add_provider(struct device_node *np, + struct clk *(*clk_src_get)(struct of_phandle_args *args, + void *data), + void *data); +void of_clk_del_provider(struct device_node *np); +struct clk *of_clk_src_simple_get(struct of_phandle_args *clkspec, + void *data); +struct clk *of_clk_src_onecell_get(struct of_phandle_args *clkspec, void *data); +int of_clk_get_parent_count(struct device_node *np); +const char *of_clk_get_parent_name(struct device_node *np, int index); + +void of_clk_init(const struct of_device_id *matches); + +#else /* !CONFIG_OF */ + +static inline int of_clk_add_provider(struct device_node *np, + struct clk *(*clk_src_get)(struct of_phandle_args *args, + void *data), + void *data) +{ + return 0; +} +#define of_clk_del_provider(np) \ + { while (0); } +static inline struct clk *of_clk_src_simple_get( + struct of_phandle_args *clkspec, void *data) +{ + return ERR_PTR(-ENOENT); +} +static inline struct clk *of_clk_src_onecell_get( + struct of_phandle_args *clkspec, void *data) +{ + return ERR_PTR(-ENOENT); +} +static inline const char *of_clk_get_parent_name(struct device_node *np, + int index) +{ + return NULL; +} +#define of_clk_init(matches) \ + { while (0); } +#endif /* CONFIG_OF */ + +/* + * wrap access to peripherals in accessor routines + * for improved portability across platforms + */ + +#if IS_ENABLED(CONFIG_PPC) + +static inline u32 clk_readl(u32 __iomem *reg) +{ + return ioread32be(reg); +} + +static inline void clk_writel(u32 val, u32 __iomem *reg) +{ + iowrite32be(val, reg); +} + +#else /* platform dependent I/O accessors */ + +static inline u32 clk_readl(u32 __iomem *reg) +{ + return readl(reg); +} + +static inline void clk_writel(u32 val, u32 __iomem *reg) +{ + writel(val, reg); +} + +#endif /* platform dependent I/O accessors */ + +#ifdef CONFIG_DEBUG_FS +struct dentry *clk_debugfs_add_file(struct clk_hw *hw, char *name, umode_t mode, + void *data, const struct file_operations *fops); +#endif + +#endif /* CONFIG_COMMON_CLK */ +#endif /* CLK_PROVIDER_H */ |