summaryrefslogtreecommitdiff
path: root/include/linux/com20020.h
diff options
context:
space:
mode:
Diffstat (limited to 'include/linux/com20020.h')
-rw-r--r--include/linux/com20020.h145
1 files changed, 0 insertions, 145 deletions
diff --git a/include/linux/com20020.h b/include/linux/com20020.h
deleted file mode 100644
index 85898995b..000000000
--- a/include/linux/com20020.h
+++ /dev/null
@@ -1,145 +0,0 @@
-/*
- * Linux ARCnet driver - COM20020 chipset support - function declarations
- *
- * Written 1997 by David Woodhouse.
- * Written 1994-1999 by Avery Pennarun.
- * Derived from skeleton.c by Donald Becker.
- *
- * Special thanks to Contemporary Controls, Inc. (www.ccontrols.com)
- * for sponsoring the further development of this driver.
- *
- * **********************
- *
- * The original copyright of skeleton.c was as follows:
- *
- * skeleton.c Written 1993 by Donald Becker.
- * Copyright 1993 United States Government as represented by the
- * Director, National Security Agency. This software may only be used
- * and distributed according to the terms of the GNU General Public License as
- * modified by SRC, incorporated herein by reference.
- *
- * **********************
- *
- * For more details, see drivers/net/arcnet.c
- *
- * **********************
- */
-#ifndef __COM20020_H
-#define __COM20020_H
-
-int com20020_check(struct net_device *dev);
-int com20020_found(struct net_device *dev, int shared);
-extern const struct net_device_ops com20020_netdev_ops;
-
-/* The number of low I/O ports used by the card. */
-#define ARCNET_TOTAL_SIZE 8
-
-/* various register addresses */
-#ifdef CONFIG_SA1100_CT6001
-#define BUS_ALIGN 2 /* 8 bit device on a 16 bit bus - needs padding */
-#else
-#define BUS_ALIGN 1
-#endif
-
-#define PLX_PCI_MAX_CARDS 2
-
-struct com20020_pci_channel_map {
- u32 bar;
- u32 offset;
- u32 size; /* 0x00 - auto, e.g. length of entire bar */
-};
-
-struct com20020_pci_card_info {
- const char *name;
- int devcount;
-
- struct com20020_pci_channel_map chan_map_tbl[PLX_PCI_MAX_CARDS];
-
- unsigned int flags;
-};
-
-struct com20020_priv {
- struct com20020_pci_card_info *ci;
- struct list_head list_dev;
-};
-
-struct com20020_dev {
- struct list_head list;
- struct net_device *dev;
-
- struct com20020_priv *pci_priv;
- int index;
-};
-
-#define _INTMASK (ioaddr+BUS_ALIGN*0) /* writable */
-#define _STATUS (ioaddr+BUS_ALIGN*0) /* readable */
-#define _COMMAND (ioaddr+BUS_ALIGN*1) /* standard arcnet commands */
-#define _DIAGSTAT (ioaddr+BUS_ALIGN*1) /* diagnostic status register */
-#define _ADDR_HI (ioaddr+BUS_ALIGN*2) /* control registers for IO-mapped memory */
-#define _ADDR_LO (ioaddr+BUS_ALIGN*3)
-#define _MEMDATA (ioaddr+BUS_ALIGN*4) /* data port for IO-mapped memory */
-#define _SUBADR (ioaddr+BUS_ALIGN*5) /* the extended port _XREG refers to */
-#define _CONFIG (ioaddr+BUS_ALIGN*6) /* configuration register */
-#define _XREG (ioaddr+BUS_ALIGN*7) /* extra registers (indexed by _CONFIG
- or _SUBADR) */
-
-/* in the ADDR_HI register */
-#define RDDATAflag 0x80 /* next access is a read (not a write) */
-
-/* in the DIAGSTAT register */
-#define NEWNXTIDflag 0x02 /* ID to which token is passed has changed */
-
-/* in the CONFIG register */
-#define RESETcfg 0x80 /* put card in reset state */
-#define TXENcfg 0x20 /* enable TX */
-
-/* in SETUP register */
-#define PROMISCset 0x10 /* enable RCV_ALL */
-#define P1MODE 0x80 /* enable P1-MODE for Backplane */
-#define SLOWARB 0x01 /* enable Slow Arbitration for >=5Mbps */
-
-/* COM2002x */
-#define SUB_TENTATIVE 0 /* tentative node ID */
-#define SUB_NODE 1 /* node ID */
-#define SUB_SETUP1 2 /* various options */
-#define SUB_TEST 3 /* test/diag register */
-
-/* COM20022 only */
-#define SUB_SETUP2 4 /* sundry options */
-#define SUB_BUSCTL 5 /* bus control options */
-#define SUB_DMACOUNT 6 /* DMA count options */
-
-#define SET_SUBADR(x) do { \
- if ((x) < 4) \
- { \
- lp->config = (lp->config & ~0x03) | (x); \
- SETCONF; \
- } \
- else \
- { \
- outb(x, _SUBADR); \
- } \
-} while (0)
-
-#undef ARCRESET
-#undef ASTATUS
-#undef ACOMMAND
-#undef AINTMASK
-
-#define ARCRESET { outb(lp->config | 0x80, _CONFIG); \
- udelay(5); \
- outb(lp->config , _CONFIG); \
- }
-#define ARCRESET0 { outb(0x18 | 0x80, _CONFIG); \
- udelay(5); \
- outb(0x18 , _CONFIG); \
- }
-
-#define ASTATUS() inb(_STATUS)
-#define ADIAGSTATUS() inb(_DIAGSTAT)
-#define ACOMMAND(cmd) outb((cmd),_COMMAND)
-#define AINTMASK(msk) outb((msk),_INTMASK)
-
-#define SETCONF outb(lp->config, _CONFIG)
-
-#endif /* __COM20020_H */