diff options
Diffstat (limited to 'include/linux/extcon.h')
| -rw-r--r-- | include/linux/extcon.h | 134 |
1 files changed, 57 insertions, 77 deletions
diff --git a/include/linux/extcon.h b/include/linux/extcon.h index 36f49c405..b16d929fa 100644 --- a/include/linux/extcon.h +++ b/include/linux/extcon.h @@ -1,6 +1,9 @@ /* * External connector (extcon) class driver * + * Copyright (C) 2015 Samsung Electronics + * Author: Chanwoo Choi <cw00.choi@samsung.com> + * * Copyright (C) 2012 Samsung Electronics * Author: Donggeun Kim <dg77.kim@samsung.com> * Author: MyungJoo Ham <myungjoo.ham@samsung.com> @@ -27,50 +30,35 @@ #include <linux/notifier.h> #include <linux/sysfs.h> -#define SUPPORTED_CABLE_MAX 32 -#define CABLE_NAME_MAX 30 - /* - * The standard cable name is to help support general notifier - * and notifiee device drivers to share the common names. - * Please use standard cable names unless your notifier device has - * a very unique and abnormal cable or - * the cable type is supposed to be used with only one unique - * pair of notifier/notifiee devices. - * - * Please add any other "standard" cables used with extcon dev. - * - * You may add a dot and number to specify version or specification - * of the specific cable if it is required. (e.g., "Fast-charger.18" - * and "Fast-charger.10" for 1.8A and 1.0A chargers) - * However, the notifiee and notifier should be able to handle such - * string and if the notifiee can negotiate the protocol or identify, - * you don't need such convention. This convention is helpful when - * notifier can distinguish but notifiee cannot. + * Define the unique id of supported external connectors */ -enum extcon_cable_name { - EXTCON_USB = 0, - EXTCON_USB_HOST, - EXTCON_TA, /* Travel Adaptor */ - EXTCON_FAST_CHARGER, - EXTCON_SLOW_CHARGER, - EXTCON_CHARGE_DOWNSTREAM, /* Charging an external device */ - EXTCON_HDMI, - EXTCON_MHL, - EXTCON_DVI, - EXTCON_VGA, - EXTCON_DOCK, - EXTCON_LINE_IN, - EXTCON_LINE_OUT, - EXTCON_MIC_IN, - EXTCON_HEADPHONE_OUT, - EXTCON_SPDIF_IN, - EXTCON_SPDIF_OUT, - EXTCON_VIDEO_IN, - EXTCON_VIDEO_OUT, - EXTCON_MECHANICAL, -}; -extern const char extcon_cable_name[][CABLE_NAME_MAX + 1]; +#define EXTCON_NONE 0 + +#define EXTCON_USB 1 /* USB connector */ +#define EXTCON_USB_HOST 2 + +#define EXTCON_TA 3 /* Charger connector */ +#define EXTCON_FAST_CHARGER 4 +#define EXTCON_SLOW_CHARGER 5 +#define EXTCON_CHARGE_DOWNSTREAM 6 + +#define EXTCON_LINE_IN 7 /* Audio/Video connector */ +#define EXTCON_LINE_OUT 8 +#define EXTCON_MICROPHONE 9 +#define EXTCON_HEADPHONE 10 +#define EXTCON_HDMI 11 +#define EXTCON_MHL 12 +#define EXTCON_DVI 13 +#define EXTCON_VGA 14 +#define EXTCON_SPDIF_IN 15 +#define EXTCON_SPDIF_OUT 16 +#define EXTCON_VIDEO_IN 17 +#define EXTCON_VIDEO_OUT 18 + +#define EXTCON_DOCK 19 /* Misc connector */ +#define EXTCON_JIG 20 +#define EXTCON_MECHANICAL 21 struct extcon_cable; @@ -78,7 +66,7 @@ struct extcon_cable; * struct extcon_dev - An extcon device represents one external connector. * @name: The name of this extcon device. Parent device name is * used if NULL. - * @supported_cable: Array of supported cable names ending with NULL. + * @supported_cable: Array of supported cable names ending with EXTCON_NONE. * If supported_cable is NULL, cable name related APIs * are disabled. * @mutually_exclusive: Array of mutually exclusive set of cables that cannot @@ -89,16 +77,14 @@ struct extcon_cable; * be attached simulataneously. {0x7, 0} is equivalent to * {0x3, 0x6, 0x5, 0}. If it is {0xFFFFFFFF, 0}, there * can be no simultaneous connections. - * @print_name: An optional callback to override the method to print the - * name of the extcon device. * @print_state: An optional callback to override the method to print the * status of the extcon device. * @dev: Device of this extcon. * @state: Attach/detach state of this extcon. Do not provide at * register-time. * @nh: Notifier for the state change events from this extcon - * @entry: To support list of extcon devices so that users can search - * for extcon devices based on the extcon name. + * @entry: To support list of extcon devices so that users can + * search for extcon devices based on the extcon name. * @lock: * @max_supported: Internal value to store the number of cables. * @extcon_dev_type: Device_type struct to provide attribute_groups @@ -113,16 +99,15 @@ struct extcon_cable; struct extcon_dev { /* Optional user initializing data */ const char *name; - const char **supported_cable; + const unsigned int *supported_cable; const u32 *mutually_exclusive; /* Optional callbacks to override class functions */ - ssize_t (*print_name)(struct extcon_dev *edev, char *buf); ssize_t (*print_state)(struct extcon_dev *edev, char *buf); /* Internal data. Please do not set. */ struct device dev; - struct raw_notifier_head nh; + struct raw_notifier_head *nh; struct list_head entry; int max_supported; spinlock_t lock; /* could be called by irq handler */ @@ -161,8 +146,6 @@ struct extcon_cable { /** * struct extcon_specific_cable_nb - An internal data for * extcon_register_interest(). - * @internal_nb: A notifier block bridging extcon notifier - * and cable notifier. * @user_nb: user provided notifier block for events from * a specific cable. * @cable_index: the target cable. @@ -170,7 +153,6 @@ struct extcon_cable { * @previous_value: the saved previous event value. */ struct extcon_specific_cable_nb { - struct notifier_block internal_nb; struct notifier_block *user_nb; int cable_index; struct extcon_dev *edev; @@ -194,10 +176,10 @@ extern struct extcon_dev *extcon_get_extcon_dev(const char *extcon_name); /* * Following APIs control the memory of extcon device. */ -extern struct extcon_dev *extcon_dev_allocate(const char **cables); +extern struct extcon_dev *extcon_dev_allocate(const unsigned int *cable); extern void extcon_dev_free(struct extcon_dev *edev); extern struct extcon_dev *devm_extcon_dev_allocate(struct device *dev, - const char **cables); + const unsigned int *cable); extern void devm_extcon_dev_free(struct device *dev, struct extcon_dev *edev); /* @@ -216,13 +198,10 @@ extern int extcon_update_state(struct extcon_dev *edev, u32 mask, u32 state); /* * get/set_cable_state access each bit of the 32b encoded state value. - * They are used to access the status of each cable based on the cable_name - * or cable_index, which is retrieved by extcon_find_cable_index + * They are used to access the status of each cable based on the cable_name. */ -extern int extcon_find_cable_index(struct extcon_dev *sdev, - const char *cable_name); -extern int extcon_get_cable_state_(struct extcon_dev *edev, int cable_index); -extern int extcon_set_cable_state_(struct extcon_dev *edev, int cable_index, +extern int extcon_get_cable_state_(struct extcon_dev *edev, unsigned int id); +extern int extcon_set_cable_state_(struct extcon_dev *edev, unsigned int id, bool cable_state); extern int extcon_get_cable_state(struct extcon_dev *edev, @@ -249,16 +228,21 @@ extern int extcon_unregister_interest(struct extcon_specific_cable_nb *nb); * we do not recommend to use this for normal 'notifiee' device drivers who * want to be notified by a specific external port of the notifier. */ -extern int extcon_register_notifier(struct extcon_dev *edev, +extern int extcon_register_notifier(struct extcon_dev *edev, unsigned int id, + struct notifier_block *nb); +extern int extcon_unregister_notifier(struct extcon_dev *edev, unsigned int id, struct notifier_block *nb); -extern int extcon_unregister_notifier(struct extcon_dev *edev, - struct notifier_block *nb); /* * Following API get the extcon device from devicetree. * This function use phandle of devicetree to get extcon device directly. */ -extern struct extcon_dev *extcon_get_edev_by_phandle(struct device *dev, int index); +extern struct extcon_dev *extcon_get_edev_by_phandle(struct device *dev, + int index); + +/* Following API to get information of extcon device */ +extern const char *extcon_get_edev_name(struct extcon_dev *edev); + #else /* CONFIG_EXTCON */ static inline int extcon_dev_register(struct extcon_dev *edev) { @@ -276,7 +260,7 @@ static inline int devm_extcon_dev_register(struct device *dev, static inline void devm_extcon_dev_unregister(struct device *dev, struct extcon_dev *edev) { } -static inline struct extcon_dev *extcon_dev_allocate(const char **cables) +static inline struct extcon_dev *extcon_dev_allocate(const unsigned int *cable) { return ERR_PTR(-ENOSYS); } @@ -284,7 +268,7 @@ static inline struct extcon_dev *extcon_dev_allocate(const char **cables) static inline void extcon_dev_free(struct extcon_dev *edev) { } static inline struct extcon_dev *devm_extcon_dev_allocate(struct device *dev, - const char **cables) + const unsigned int *cable) { return ERR_PTR(-ENOSYS); } @@ -307,20 +291,14 @@ static inline int extcon_update_state(struct extcon_dev *edev, u32 mask, return 0; } -static inline int extcon_find_cable_index(struct extcon_dev *edev, - const char *cable_name) -{ - return 0; -} - static inline int extcon_get_cable_state_(struct extcon_dev *edev, - int cable_index) + unsigned int id) { return 0; } static inline int extcon_set_cable_state_(struct extcon_dev *edev, - int cable_index, bool cable_state) + unsigned int id, bool cable_state) { return 0; } @@ -343,13 +321,15 @@ static inline struct extcon_dev *extcon_get_extcon_dev(const char *extcon_name) } static inline int extcon_register_notifier(struct extcon_dev *edev, - struct notifier_block *nb) + unsigned int id, + struct notifier_block *nb) { return 0; } static inline int extcon_unregister_notifier(struct extcon_dev *edev, - struct notifier_block *nb) + unsigned int id, + struct notifier_block *nb) { return 0; } |