1 files changed, 313 insertions, 0 deletions
diff --git a/include/linux/hwspinlock.h b/include/linux/hwspinlock.h
new file mode 100644
index 000000000..3343298e4
--- /dev/null
+++ b/include/linux/hwspinlock.h
@@ -0,0 +1,313 @@
+/*
+ * Hardware spinlock public header
+ *
+ * Copyright (C) 2010 Texas Instruments Incorporated - http://www.ti.com
+ *
+ * Contact: Ohad Ben-Cohen <ohad@wizery.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __LINUX_HWSPINLOCK_H
+#define __LINUX_HWSPINLOCK_H
+
+#include <linux/err.h>
+#include <linux/sched.h>
+
+/* hwspinlock mode argument */
+#define HWLOCK_IRQSTATE	0x01	/* Disable interrupts, save state */
+#define HWLOCK_IRQ	0x02	/* Disable interrupts, don't save state */
+
+struct device;
+struct hwspinlock;
+struct hwspinlock_device;
+struct hwspinlock_ops;
+
+/**
+ * struct hwspinlock_pdata - platform data for hwspinlock drivers
+ * @base_id: base id for this hwspinlock device
+ *
+ * hwspinlock devices provide system-wide hardware locks that are used
+ * by remote processors that have no other way to achieve synchronization.
+ *
+ * To achieve that, each physical lock must have a system-wide id number
+ * that is agreed upon, otherwise remote processors can't possibly assume
+ * they're using the same hardware lock.
+ *
+ * Usually boards have a single hwspinlock device, which provides several
+ * hwspinlocks, and in this case, they can be trivially numbered 0 to
+ * (num-of-locks - 1).
+ *
+ * In case boards have several hwspinlocks devices, a different base id
+ * should be used for each hwspinlock device (they can't all use 0 as
+ * a starting id!).
+ *
+ * This platform data structure should be used to provide the base id
+ * for each device (which is trivially 0 when only a single hwspinlock
+ * device exists). It can be shared between different platforms, hence
+ * its location.
+ */
+struct hwspinlock_pdata {
+	int base_id;
+};
+
+#if defined(CONFIG_HWSPINLOCK) || defined(CONFIG_HWSPINLOCK_MODULE)
+
+int hwspin_lock_register(struct hwspinlock_device *bank, struct device *dev,
+		const struct hwspinlock_ops *ops, int base_id, int num_locks);
+int hwspin_lock_unregister(struct hwspinlock_device *bank);
+struct hwspinlock *hwspin_lock_request(void);
+struct hwspinlock *hwspin_lock_request_specific(unsigned int id);
+int hwspin_lock_free(struct hwspinlock *hwlock);
+int hwspin_lock_get_id(struct hwspinlock *hwlock);
+int __hwspin_lock_timeout(struct hwspinlock *, unsigned int, int,
+							unsigned long *);
+int __hwspin_trylock(struct hwspinlock *, int, unsigned long *);
+void __hwspin_unlock(struct hwspinlock *, int, unsigned long *);
+
+#else /* !CONFIG_HWSPINLOCK */
+
+/*
+ * We don't want these functions to fail if CONFIG_HWSPINLOCK is not
+ * enabled. We prefer to silently succeed in this case, and let the
+ * code path get compiled away. This way, if CONFIG_HWSPINLOCK is not
+ * required on a given setup, users will still work.
+ *
+ * The only exception is hwspin_lock_register/hwspin_lock_unregister, with which
+ * we _do_ want users to fail (no point in registering hwspinlock instances if
+ * the framework is not available).
+ *
+ * Note: ERR_PTR(-ENODEV) will still be considered a success for NULL-checking
+ * users. Others, which care, can still check this with IS_ERR.
+ */
+static inline struct hwspinlock *hwspin_lock_request(void)
+{
+	return ERR_PTR(-ENODEV);
+}
+
+static inline struct hwspinlock *hwspin_lock_request_specific(unsigned int id)
+{
+	return ERR_PTR(-ENODEV);
+}
+
+static inline int hwspin_lock_free(struct hwspinlock *hwlock)
+{
+	return 0;
+}
+
+static inline
+int __hwspin_lock_timeout(struct hwspinlock *hwlock, unsigned int to,
+					int mode, unsigned long *flags)
+{
+	return 0;
+}
+
+static inline
+int __hwspin_trylock(struct hwspinlock *hwlock, int mode, unsigned long *flags)
+{
+	return 0;
+}
+
+static inline
+void __hwspin_unlock(struct hwspinlock *hwlock, int mode, unsigned long *flags)
+{
+}
+
+static inline int hwspin_lock_get_id(struct hwspinlock *hwlock)
+{
+	return 0;
+}
+
+#endif /* !CONFIG_HWSPINLOCK */
+
+/**
+ * hwspin_trylock_irqsave() - try to lock an hwspinlock, disable interrupts
+ * @hwlock: an hwspinlock which we want to trylock
+ * @flags: a pointer to where the caller's interrupt state will be saved at
+ *
+ * This function attempts to lock the underlying hwspinlock, and will
+ * immediately fail if the hwspinlock is already locked.
+ *
+ * Upon a successful return from this function, preemption and local
+ * interrupts are disabled (previous interrupts state is saved at @flags),
+ * so the caller must not sleep, and is advised to release the hwspinlock
+ * as soon as possible.
+ *
+ * Returns 0 if we successfully locked the hwspinlock, -EBUSY if
+ * the hwspinlock was already taken, and -EINVAL if @hwlock is invalid.
+ */
+static inline
+int hwspin_trylock_irqsave(struct hwspinlock *hwlock, unsigned long *flags)
+{
+	return __hwspin_trylock(hwlock, HWLOCK_IRQSTATE, flags);
+}
+
+/**
+ * hwspin_trylock_irq() - try to lock an hwspinlock, disable interrupts
+ * @hwlock: an hwspinlock which we want to trylock
+ *
+ * This function attempts to lock the underlying hwspinlock, and will
+ * immediately fail if the hwspinlock is already locked.
+ *
+ * Upon a successful return from this function, preemption and local
+ * interrupts are disabled, so the caller must not sleep, and is advised
+ * to release the hwspinlock as soon as possible.
+ *
+ * Returns 0 if we successfully locked the hwspinlock, -EBUSY if
+ * the hwspinlock was already taken, and -EINVAL if @hwlock is invalid.
+ */
+static inline int hwspin_trylock_irq(struct hwspinlock *hwlock)
+{
+	return __hwspin_trylock(hwlock, HWLOCK_IRQ, NULL);
+}
+
+/**
+ * hwspin_trylock() - attempt to lock a specific hwspinlock
+ * @hwlock: an hwspinlock which we want to trylock
+ *
+ * This function attempts to lock an hwspinlock, and will immediately fail
+ * if the hwspinlock is already taken.
+ *
+ * Upon a successful return from this function, preemption is disabled,
+ * so the caller must not sleep, and is advised to release the hwspinlock
+ * as soon as possible. This is required in order to minimize remote cores
+ * polling on the hardware interconnect.
+ *
+ * Returns 0 if we successfully locked the hwspinlock, -EBUSY if
+ * the hwspinlock was already taken, and -EINVAL if @hwlock is invalid.
+ */
+static inline int hwspin_trylock(struct hwspinlock *hwlock)
+{
+	return __hwspin_trylock(hwlock, 0, NULL);
+}
+
+/**
+ * hwspin_lock_timeout_irqsave() - lock hwspinlock, with timeout, disable irqs
+ * @hwlock: the hwspinlock to be locked
+ * @to: timeout value in msecs
+ * @flags: a pointer to where the caller's interrupt state will be saved at
+ *
+ * This function locks the underlying @hwlock. If the @hwlock
+ * is already taken, the function will busy loop waiting for it to
+ * be released, but give up when @timeout msecs have elapsed.
+ *
+ * Upon a successful return from this function, preemption and local interrupts
+ * are disabled (plus previous interrupt state is saved), so the caller must
+ * not sleep, and is advised to release the hwspinlock as soon as possible.
+ *
+ * Returns 0 when the @hwlock was successfully taken, and an appropriate
+ * error code otherwise (most notably an -ETIMEDOUT if the @hwlock is still
+ * busy after @timeout msecs). The function will never sleep.
+ */
+static inline int hwspin_lock_timeout_irqsave(struct hwspinlock *hwlock,
+				unsigned int to, unsigned long *flags)
+{
+	return __hwspin_lock_timeout(hwlock, to, HWLOCK_IRQSTATE, flags);
+}
+
+/**
+ * hwspin_lock_timeout_irq() - lock hwspinlock, with timeout, disable irqs
+ * @hwlock: the hwspinlock to be locked
+ * @to: timeout value in msecs
+ *
+ * This function locks the underlying @hwlock. If the @hwlock
+ * is already taken, the function will busy loop waiting for it to
+ * be released, but give up when @timeout msecs have elapsed.
+ *
+ * Upon a successful return from this function, preemption and local interrupts
+ * are disabled so the caller must not sleep, and is advised to release the
+ * hwspinlock as soon as possible.
+ *
+ * Returns 0 when the @hwlock was successfully taken, and an appropriate
+ * error code otherwise (most notably an -ETIMEDOUT if the @hwlock is still
+ * busy after @timeout msecs). The function will never sleep.
+ */
+static inline
+int hwspin_lock_timeout_irq(struct hwspinlock *hwlock, unsigned int to)
+{
+	return __hwspin_lock_timeout(hwlock, to, HWLOCK_IRQ, NULL);
+}
+
+/**
+ * hwspin_lock_timeout() - lock an hwspinlock with timeout limit
+ * @hwlock: the hwspinlock to be locked
+ * @to: timeout value in msecs
+ *
+ * This function locks the underlying @hwlock. If the @hwlock
+ * is already taken, the function will busy loop waiting for it to
+ * be released, but give up when @timeout msecs have elapsed.
+ *
+ * Upon a successful return from this function, preemption is disabled
+ * so the caller must not sleep, and is advised to release the hwspinlock
+ * as soon as possible.
+ * This is required in order to minimize remote cores polling on the
+ * hardware interconnect.
+ *
+ * Returns 0 when the @hwlock was successfully taken, and an appropriate
+ * error code otherwise (most notably an -ETIMEDOUT if the @hwlock is still
+ * busy after @timeout msecs). The function will never sleep.
+ */
+static inline
+int hwspin_lock_timeout(struct hwspinlock *hwlock, unsigned int to)
+{
+	return __hwspin_lock_timeout(hwlock, to, 0, NULL);
+}
+
+/**
+ * hwspin_unlock_irqrestore() - unlock hwspinlock, restore irq state
+ * @hwlock: a previously-acquired hwspinlock which we want to unlock
+ * @flags: previous caller's interrupt state to restore
+ *
+ * This function will unlock a specific hwspinlock, enable preemption and
+ * restore the previous state of the local interrupts. It should be used
+ * to undo, e.g., hwspin_trylock_irqsave().
+ *
+ * @hwlock must be already locked before calling this function: it is a bug
+ * to call unlock on a @hwlock that is already unlocked.
+ */
+static inline void hwspin_unlock_irqrestore(struct hwspinlock *hwlock,
+							unsigned long *flags)
+{
+	__hwspin_unlock(hwlock, HWLOCK_IRQSTATE, flags);
+}
+
+/**
+ * hwspin_unlock_irq() - unlock hwspinlock, enable interrupts
+ * @hwlock: a previously-acquired hwspinlock which we want to unlock
+ *
+ * This function will unlock a specific hwspinlock, enable preemption and
+ * enable local interrupts. Should be used to undo hwspin_lock_irq().
+ *
+ * @hwlock must be already locked (e.g. by hwspin_trylock_irq()) before
+ * calling this function: it is a bug to call unlock on a @hwlock that is
+ * already unlocked.
+ */
+static inline void hwspin_unlock_irq(struct hwspinlock *hwlock)
+{
+	__hwspin_unlock(hwlock, HWLOCK_IRQ, NULL);
+}
+
+/**
+ * hwspin_unlock() - unlock hwspinlock
+ * @hwlock: a previously-acquired hwspinlock which we want to unlock
+ *
+ * This function will unlock a specific hwspinlock and enable preemption
+ * back.
+ *
+ * @hwlock must be already locked (e.g. by hwspin_trylock()) before calling
+ * this function: it is a bug to call unlock on a @hwlock that is already
+ * unlocked.
+ */
+static inline void hwspin_unlock(struct hwspinlock *hwlock)
+{
+	__hwspin_unlock(hwlock, 0, NULL);
+}
+
+#endif /* __LINUX_HWSPINLOCK_H */