diff options
Diffstat (limited to 'include/linux/i2c.h')
| -rw-r--r-- | include/linux/i2c.h | 47 |
1 files changed, 46 insertions, 1 deletions
diff --git a/include/linux/i2c.h b/include/linux/i2c.h index 768063baa..200cf13b0 100644 --- a/include/linux/i2c.h +++ b/include/linux/i2c.h @@ -414,6 +414,22 @@ struct i2c_algorithm { }; /** + * struct i2c_timings - I2C timing information + * @bus_freq_hz: the bus frequency in Hz + * @scl_rise_ns: time SCL signal takes to rise in ns; t(r) in the I2C specification + * @scl_fall_ns: time SCL signal takes to fall in ns; t(f) in the I2C specification + * @scl_int_delay_ns: time IP core additionally needs to setup SCL in ns + * @sda_fall_ns: time SDA signal takes to fall in ns; t(f) in the I2C specification + */ +struct i2c_timings { + u32 bus_freq_hz; + u32 scl_rise_ns; + u32 scl_fall_ns; + u32 scl_int_delay_ns; + u32 sda_fall_ns; +}; + +/** * struct i2c_bus_recovery_info - I2C bus recovery information * @recover_bus: Recover routine. Either pass driver's recover_bus() routine, or * i2c_generic_scl_recovery() or i2c_generic_gpio_recovery(). @@ -493,6 +509,8 @@ struct i2c_adapter_quirks { /* convenience macro for typical write-then read case */ #define I2C_AQ_COMB_WRITE_THEN_READ (I2C_AQ_COMB | I2C_AQ_COMB_WRITE_FIRST | \ I2C_AQ_COMB_READ_SECOND | I2C_AQ_COMB_SAME_ADDR) +/* clock stretching is not supported */ +#define I2C_AQ_NO_CLK_STRETCH BIT(4) /* * i2c_adapter is the structure used to identify a physical i2c bus along @@ -602,6 +620,7 @@ extern void i2c_clients_command(struct i2c_adapter *adap, extern struct i2c_adapter *i2c_get_adapter(int nr); extern void i2c_put_adapter(struct i2c_adapter *adap); +void i2c_parse_fw_timings(struct device *dev, struct i2c_timings *t, bool use_defaults); /* Return the functionality mask */ static inline u32 i2c_get_functionality(struct i2c_adapter *adap) @@ -615,6 +634,20 @@ static inline int i2c_check_functionality(struct i2c_adapter *adap, u32 func) return (func & i2c_get_functionality(adap)) == func; } +/** + * i2c_check_quirks() - Function for checking the quirk flags in an i2c adapter + * @adap: i2c adapter + * @quirks: quirk flags + * + * Return: true if the adapter has all the specified quirk flags, false if not + */ +static inline bool i2c_check_quirks(struct i2c_adapter *adap, u64 quirks) +{ + if (!adap->quirks) + return false; + return (adap->quirks->flags & quirks) == quirks; +} + /* Return the adapter number for a specific adapter */ static inline int i2c_adapter_id(struct i2c_adapter *adap) { @@ -622,7 +655,7 @@ static inline int i2c_adapter_id(struct i2c_adapter *adap) } /** - * module_i2c_driver() - Helper macro for registering a I2C driver + * module_i2c_driver() - Helper macro for registering a modular I2C driver * @__i2c_driver: i2c_driver struct * * Helper macro for I2C drivers which do not do anything special in module @@ -633,6 +666,17 @@ static inline int i2c_adapter_id(struct i2c_adapter *adap) module_driver(__i2c_driver, i2c_add_driver, \ i2c_del_driver) +/** + * builtin_i2c_driver() - Helper macro for registering a builtin I2C driver + * @__i2c_driver: i2c_driver struct + * + * Helper macro for I2C drivers which do not do anything special in their + * init. This eliminates a lot of boilerplate. Each driver may only + * use this macro once, and calling it replaces device_initcall(). + */ +#define builtin_i2c_driver(__i2c_driver) \ + builtin_driver(__i2c_driver, i2c_add_driver) + #endif /* I2C */ #if IS_ENABLED(CONFIG_OF) @@ -644,6 +688,7 @@ extern struct i2c_adapter *of_find_i2c_adapter_by_node(struct device_node *node) /* must call i2c_put_adapter() when done with returned i2c_adapter device */ struct i2c_adapter *of_get_i2c_adapter_by_node(struct device_node *node); + #else static inline struct i2c_client *of_find_i2c_device_by_node(struct device_node *node) |