diff options
Diffstat (limited to 'include/linux/iio')
27 files changed, 3038 insertions, 0 deletions
diff --git a/include/linux/iio/accel/kxcjk_1013.h b/include/linux/iio/accel/kxcjk_1013.h new file mode 100644 index 000000000..fd1d540ea --- /dev/null +++ b/include/linux/iio/accel/kxcjk_1013.h @@ -0,0 +1,22 @@ +/* + * KXCJK-1013 3-axis accelerometer Interface + * Copyright (c) 2014, Intel Corporation. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + */ + +#ifndef __IIO_KXCJK_1013_H__ +#define __IIO_KXCJK_1013_H__ + +struct kxcjk_1013_platform_data { + bool active_high_intr; +}; + +#endif diff --git a/include/linux/iio/adc/ad_sigma_delta.h b/include/linux/iio/adc/ad_sigma_delta.h new file mode 100644 index 000000000..e7fdec4db --- /dev/null +++ b/include/linux/iio/adc/ad_sigma_delta.h @@ -0,0 +1,173 @@ +/* + * Support code for Analog Devices Sigma-Delta ADCs + * + * Copyright 2012 Analog Devices Inc. + * Author: Lars-Peter Clausen <lars@metafoo.de> + * + * Licensed under the GPL-2. + */ +#ifndef __AD_SIGMA_DELTA_H__ +#define __AD_SIGMA_DELTA_H__ + +enum ad_sigma_delta_mode { + AD_SD_MODE_CONTINUOUS = 0, + AD_SD_MODE_SINGLE = 1, + AD_SD_MODE_IDLE = 2, + AD_SD_MODE_POWERDOWN = 3, +}; + +/** + * struct ad_sigma_delta_calib_data - Calibration data for Sigma Delta devices + * @mode: Calibration mode. + * @channel: Calibration channel. + */ +struct ad_sd_calib_data { + unsigned int mode; + unsigned int channel; +}; + +struct ad_sigma_delta; +struct iio_dev; + +/** + * struct ad_sigma_delta_info - Sigma Delta driver specific callbacks and options + * @set_channel: Will be called to select the current channel, may be NULL. + * @set_mode: Will be called to select the current mode, may be NULL. + * @postprocess_sample: Is called for each sampled data word, can be used to + * modify or drop the sample data, it, may be NULL. + * @has_registers: true if the device has writable and readable registers, false + * if there is just one read-only sample data shift register. + * @addr_shift: Shift of the register address in the communications register. + * @read_mask: Mask for the communications register having the read bit set. + */ +struct ad_sigma_delta_info { + int (*set_channel)(struct ad_sigma_delta *, unsigned int channel); + int (*set_mode)(struct ad_sigma_delta *, enum ad_sigma_delta_mode mode); + int (*postprocess_sample)(struct ad_sigma_delta *, unsigned int raw_sample); + bool has_registers; + unsigned int addr_shift; + unsigned int read_mask; +}; + +/** + * struct ad_sigma_delta - Sigma Delta device struct + * @spi: The spi device associated with the Sigma Delta device. + * @trig: The IIO trigger associated with the Sigma Delta device. + * + * Most of the fields are private to the sigma delta library code and should not + * be accessed by individual drivers. + */ +struct ad_sigma_delta { + struct spi_device *spi; + struct iio_trigger *trig; + +/* private: */ + struct completion completion; + bool irq_dis; + + bool bus_locked; + + uint8_t comm; + + const struct ad_sigma_delta_info *info; + + /* + * DMA (thus cache coherency maintenance) requires the + * transfer buffers to live in their own cache lines. + */ + uint8_t data[4] ____cacheline_aligned; +}; + +static inline int ad_sigma_delta_set_channel(struct ad_sigma_delta *sd, + unsigned int channel) +{ + if (sd->info->set_channel) + return sd->info->set_channel(sd, channel); + + return 0; +} + +static inline int ad_sigma_delta_set_mode(struct ad_sigma_delta *sd, + unsigned int mode) +{ + if (sd->info->set_mode) + return sd->info->set_mode(sd, mode); + + return 0; +} + +static inline int ad_sigma_delta_postprocess_sample(struct ad_sigma_delta *sd, + unsigned int raw_sample) +{ + if (sd->info->postprocess_sample) + return sd->info->postprocess_sample(sd, raw_sample); + + return 0; +} + +void ad_sd_set_comm(struct ad_sigma_delta *sigma_delta, uint8_t comm); +int ad_sd_write_reg(struct ad_sigma_delta *sigma_delta, unsigned int reg, + unsigned int size, unsigned int val); +int ad_sd_read_reg(struct ad_sigma_delta *sigma_delta, unsigned int reg, + unsigned int size, unsigned int *val); + +int ad_sigma_delta_single_conversion(struct iio_dev *indio_dev, + const struct iio_chan_spec *chan, int *val); +int ad_sd_calibrate_all(struct ad_sigma_delta *sigma_delta, + const struct ad_sd_calib_data *cd, unsigned int n); +int ad_sd_init(struct ad_sigma_delta *sigma_delta, struct iio_dev *indio_dev, + struct spi_device *spi, const struct ad_sigma_delta_info *info); + +int ad_sd_setup_buffer_and_trigger(struct iio_dev *indio_dev); +void ad_sd_cleanup_buffer_and_trigger(struct iio_dev *indio_dev); + +int ad_sd_validate_trigger(struct iio_dev *indio_dev, struct iio_trigger *trig); + +#define __AD_SD_CHANNEL(_si, _channel1, _channel2, _address, _bits, \ + _storagebits, _shift, _extend_name, _type) \ + { \ + .type = (_type), \ + .differential = (_channel2 == -1 ? 0 : 1), \ + .indexed = 1, \ + .channel = (_channel1), \ + .channel2 = (_channel2), \ + .address = (_address), \ + .extend_name = (_extend_name), \ + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | \ + BIT(IIO_CHAN_INFO_OFFSET), \ + .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), \ + .scan_index = (_si), \ + .scan_type = { \ + .sign = 'u', \ + .realbits = (_bits), \ + .storagebits = (_storagebits), \ + .shift = (_shift), \ + .endianness = IIO_BE, \ + }, \ + } + +#define AD_SD_DIFF_CHANNEL(_si, _channel1, _channel2, _address, _bits, \ + _storagebits, _shift) \ + __AD_SD_CHANNEL(_si, _channel1, _channel2, _address, _bits, \ + _storagebits, _shift, NULL, IIO_VOLTAGE) + +#define AD_SD_SHORTED_CHANNEL(_si, _channel, _address, _bits, \ + _storagebits, _shift) \ + __AD_SD_CHANNEL(_si, _channel, _channel, _address, _bits, \ + _storagebits, _shift, "shorted", IIO_VOLTAGE) + +#define AD_SD_CHANNEL(_si, _channel, _address, _bits, \ + _storagebits, _shift) \ + __AD_SD_CHANNEL(_si, _channel, -1, _address, _bits, \ + _storagebits, _shift, NULL, IIO_VOLTAGE) + +#define AD_SD_TEMP_CHANNEL(_si, _address, _bits, _storagebits, _shift) \ + __AD_SD_CHANNEL(_si, 0, -1, _address, _bits, \ + _storagebits, _shift, NULL, IIO_TEMP) + +#define AD_SD_SUPPLY_CHANNEL(_si, _channel, _address, _bits, _storagebits, \ + _shift) \ + __AD_SD_CHANNEL(_si, _channel, -1, _address, _bits, \ + _storagebits, _shift, "supply", IIO_VOLTAGE) + +#endif diff --git a/include/linux/iio/buffer.h b/include/linux/iio/buffer.h new file mode 100644 index 000000000..eb8622b78 --- /dev/null +++ b/include/linux/iio/buffer.h @@ -0,0 +1,180 @@ +/* The industrial I/O core - generic buffer interfaces. + * + * Copyright (c) 2008 Jonathan Cameron + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation. + */ + +#ifndef _IIO_BUFFER_GENERIC_H_ +#define _IIO_BUFFER_GENERIC_H_ +#include <linux/sysfs.h> +#include <linux/iio/iio.h> +#include <linux/kref.h> + +#ifdef CONFIG_IIO_BUFFER + +struct iio_buffer; + +/** + * struct iio_buffer_access_funcs - access functions for buffers. + * @store_to: actually store stuff to the buffer + * @read_first_n: try to get a specified number of bytes (must exist) + * @data_available: indicates how much data is available for reading from + * the buffer. + * @request_update: if a parameter change has been marked, update underlying + * storage. + * @set_bytes_per_datum:set number of bytes per datum + * @set_length: set number of datums in buffer + * @release: called when the last reference to the buffer is dropped, + * should free all resources allocated by the buffer. + * + * The purpose of this structure is to make the buffer element + * modular as event for a given driver, different usecases may require + * different buffer designs (space efficiency vs speed for example). + * + * It is worth noting that a given buffer implementation may only support a + * small proportion of these functions. The core code 'should' cope fine with + * any of them not existing. + **/ +struct iio_buffer_access_funcs { + int (*store_to)(struct iio_buffer *buffer, const void *data); + int (*read_first_n)(struct iio_buffer *buffer, + size_t n, + char __user *buf); + size_t (*data_available)(struct iio_buffer *buffer); + + int (*request_update)(struct iio_buffer *buffer); + + int (*set_bytes_per_datum)(struct iio_buffer *buffer, size_t bpd); + int (*set_length)(struct iio_buffer *buffer, int length); + + void (*release)(struct iio_buffer *buffer); +}; + +/** + * struct iio_buffer - general buffer structure + * @length: [DEVICE] number of datums in buffer + * @bytes_per_datum: [DEVICE] size of individual datum including timestamp + * @scan_el_attrs: [DRIVER] control of scan elements if that scan mode + * control method is used + * @scan_mask: [INTERN] bitmask used in masking scan mode elements + * @scan_timestamp: [INTERN] does the scan mode include a timestamp + * @access: [DRIVER] buffer access functions associated with the + * implementation. + * @scan_el_dev_attr_list:[INTERN] list of scan element related attributes. + * @scan_el_group: [DRIVER] attribute group for those attributes not + * created from the iio_chan_info array. + * @pollq: [INTERN] wait queue to allow for polling on the buffer. + * @stufftoread: [INTERN] flag to indicate new data. + * @demux_list: [INTERN] list of operations required to demux the scan. + * @demux_bounce: [INTERN] buffer for doing gather from incoming scan. + * @buffer_list: [INTERN] entry in the devices list of current buffers. + * @ref: [INTERN] reference count of the buffer. + * @watermark: [INTERN] number of datums to wait for poll/read. + */ +struct iio_buffer { + int length; + int bytes_per_datum; + struct attribute_group *scan_el_attrs; + long *scan_mask; + bool scan_timestamp; + const struct iio_buffer_access_funcs *access; + struct list_head scan_el_dev_attr_list; + struct attribute_group buffer_group; + struct attribute_group scan_el_group; + wait_queue_head_t pollq; + bool stufftoread; + const struct attribute **attrs; + struct list_head demux_list; + void *demux_bounce; + struct list_head buffer_list; + struct kref ref; + unsigned int watermark; +}; + +/** + * iio_update_buffers() - add or remove buffer from active list + * @indio_dev: device to add buffer to + * @insert_buffer: buffer to insert + * @remove_buffer: buffer_to_remove + * + * Note this will tear down the all buffering and build it up again + */ +int iio_update_buffers(struct iio_dev *indio_dev, + struct iio_buffer *insert_buffer, + struct iio_buffer *remove_buffer); + +/** + * iio_buffer_init() - Initialize the buffer structure + * @buffer: buffer to be initialized + **/ +void iio_buffer_init(struct iio_buffer *buffer); + +int iio_scan_mask_query(struct iio_dev *indio_dev, + struct iio_buffer *buffer, int bit); + +/** + * iio_push_to_buffers() - push to a registered buffer. + * @indio_dev: iio_dev structure for device. + * @data: Full scan. + */ +int iio_push_to_buffers(struct iio_dev *indio_dev, const void *data); + +/* + * iio_push_to_buffers_with_timestamp() - push data and timestamp to buffers + * @indio_dev: iio_dev structure for device. + * @data: sample data + * @timestamp: timestamp for the sample data + * + * Pushes data to the IIO device's buffers. If timestamps are enabled for the + * device the function will store the supplied timestamp as the last element in + * the sample data buffer before pushing it to the device buffers. The sample + * data buffer needs to be large enough to hold the additional timestamp + * (usually the buffer should be indio->scan_bytes bytes large). + * + * Returns 0 on success, a negative error code otherwise. + */ +static inline int iio_push_to_buffers_with_timestamp(struct iio_dev *indio_dev, + void *data, int64_t timestamp) +{ + if (indio_dev->scan_timestamp) { + size_t ts_offset = indio_dev->scan_bytes / sizeof(int64_t) - 1; + ((int64_t *)data)[ts_offset] = timestamp; + } + + return iio_push_to_buffers(indio_dev, data); +} + +int iio_update_demux(struct iio_dev *indio_dev); + +bool iio_validate_scan_mask_onehot(struct iio_dev *indio_dev, + const unsigned long *mask); + +struct iio_buffer *iio_buffer_get(struct iio_buffer *buffer); +void iio_buffer_put(struct iio_buffer *buffer); + +/** + * iio_device_attach_buffer - Attach a buffer to a IIO device + * @indio_dev: The device the buffer should be attached to + * @buffer: The buffer to attach to the device + * + * This function attaches a buffer to a IIO device. The buffer stays attached to + * the device until the device is freed. The function should only be called at + * most once per device. + */ +static inline void iio_device_attach_buffer(struct iio_dev *indio_dev, + struct iio_buffer *buffer) +{ + indio_dev->buffer = iio_buffer_get(buffer); +} + +#else /* CONFIG_IIO_BUFFER */ + +static inline void iio_buffer_get(struct iio_buffer *buffer) {} +static inline void iio_buffer_put(struct iio_buffer *buffer) {} + +#endif /* CONFIG_IIO_BUFFER */ + +#endif /* _IIO_BUFFER_GENERIC_H_ */ diff --git a/include/linux/iio/common/ssp_sensors.h b/include/linux/iio/common/ssp_sensors.h new file mode 100644 index 000000000..f4d1b0edb --- /dev/null +++ b/include/linux/iio/common/ssp_sensors.h @@ -0,0 +1,82 @@ +/* + * Copyright (C) 2014, Samsung Electronics Co. Ltd. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ +#ifndef _SSP_SENSORS_H_ +#define _SSP_SENSORS_H_ + +#include <linux/iio/iio.h> + +#define SSP_TIME_SIZE 4 +#define SSP_ACCELEROMETER_SIZE 6 +#define SSP_GYROSCOPE_SIZE 6 +#define SSP_BIO_HRM_RAW_SIZE 8 +#define SSP_BIO_HRM_RAW_FAC_SIZE 36 +#define SSP_BIO_HRM_LIB_SIZE 8 + +/** + * enum ssp_sensor_type - SSP sensor type + */ +enum ssp_sensor_type { + SSP_ACCELEROMETER_SENSOR = 0, + SSP_GYROSCOPE_SENSOR, + SSP_GEOMAGNETIC_UNCALIB_SENSOR, + SSP_GEOMAGNETIC_RAW, + SSP_GEOMAGNETIC_SENSOR, + SSP_PRESSURE_SENSOR, + SSP_GESTURE_SENSOR, + SSP_PROXIMITY_SENSOR, + SSP_TEMPERATURE_HUMIDITY_SENSOR, + SSP_LIGHT_SENSOR, + SSP_PROXIMITY_RAW, + SSP_ORIENTATION_SENSOR, + SSP_STEP_DETECTOR, + SSP_SIG_MOTION_SENSOR, + SSP_GYRO_UNCALIB_SENSOR, + SSP_GAME_ROTATION_VECTOR, + SSP_ROTATION_VECTOR, + SSP_STEP_COUNTER, + SSP_BIO_HRM_RAW, + SSP_BIO_HRM_RAW_FAC, + SSP_BIO_HRM_LIB, + SSP_SENSOR_MAX, +}; + +struct ssp_data; + +/** + * struct ssp_sensor_data - Sensor object + * @process_data: Callback to feed sensor data. + * @type: Used sensor type. + * @buffer: Received data buffer. + */ +struct ssp_sensor_data { + int (*process_data)(struct iio_dev *indio_dev, void *buf, + int64_t timestamp); + enum ssp_sensor_type type; + u8 *buffer; +}; + +void ssp_register_consumer(struct iio_dev *indio_dev, + enum ssp_sensor_type type); + +int ssp_enable_sensor(struct ssp_data *data, enum ssp_sensor_type type, + u32 delay); + +int ssp_disable_sensor(struct ssp_data *data, enum ssp_sensor_type type); + +u32 ssp_get_sensor_delay(struct ssp_data *data, enum ssp_sensor_type); + +int ssp_change_delay(struct ssp_data *data, enum ssp_sensor_type type, + u32 delay); +#endif /* _SSP_SENSORS_H_ */ diff --git a/include/linux/iio/common/st_sensors.h b/include/linux/iio/common/st_sensors.h new file mode 100644 index 000000000..2c476acb8 --- /dev/null +++ b/include/linux/iio/common/st_sensors.h @@ -0,0 +1,290 @@ +/* + * STMicroelectronics sensors library driver + * + * Copyright 2012-2013 STMicroelectronics Inc. + * + * Denis Ciocca <denis.ciocca@st.com> + * + * Licensed under the GPL-2. + */ + +#ifndef ST_SENSORS_H +#define ST_SENSORS_H + +#include <linux/i2c.h> +#include <linux/spi/spi.h> +#include <linux/irqreturn.h> +#include <linux/iio/trigger.h> +#include <linux/bitops.h> +#include <linux/regulator/consumer.h> + +#include <linux/platform_data/st_sensors_pdata.h> + +#define ST_SENSORS_TX_MAX_LENGTH 2 +#define ST_SENSORS_RX_MAX_LENGTH 6 + +#define ST_SENSORS_ODR_LIST_MAX 10 +#define ST_SENSORS_FULLSCALE_AVL_MAX 10 + +#define ST_SENSORS_NUMBER_ALL_CHANNELS 4 +#define ST_SENSORS_ENABLE_ALL_AXIS 0x07 +#define ST_SENSORS_SCAN_X 0 +#define ST_SENSORS_SCAN_Y 1 +#define ST_SENSORS_SCAN_Z 2 +#define ST_SENSORS_DEFAULT_POWER_ON_VALUE 0x01 +#define ST_SENSORS_DEFAULT_POWER_OFF_VALUE 0x00 +#define ST_SENSORS_DEFAULT_WAI_ADDRESS 0x0f +#define ST_SENSORS_DEFAULT_AXIS_ADDR 0x20 +#define ST_SENSORS_DEFAULT_AXIS_MASK 0x07 +#define ST_SENSORS_DEFAULT_AXIS_N_BIT 3 + +#define ST_SENSORS_MAX_NAME 17 +#define ST_SENSORS_MAX_4WAI 7 + +#define ST_SENSORS_LSM_CHANNELS(device_type, mask, index, mod, \ + ch2, s, endian, rbits, sbits, addr) \ +{ \ + .type = device_type, \ + .modified = mod, \ + .info_mask_separate = mask, \ + .info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ), \ + .scan_index = index, \ + .channel2 = ch2, \ + .address = addr, \ + .scan_type = { \ + .sign = s, \ + .realbits = rbits, \ + .shift = sbits - rbits, \ + .storagebits = sbits, \ + .endianness = endian, \ + }, \ +} + +#define ST_SENSORS_DEV_ATTR_SAMP_FREQ_AVAIL() \ + IIO_DEV_ATTR_SAMP_FREQ_AVAIL( \ + st_sensors_sysfs_sampling_frequency_avail) + +#define ST_SENSORS_DEV_ATTR_SCALE_AVAIL(name) \ + IIO_DEVICE_ATTR(name, S_IRUGO, \ + st_sensors_sysfs_scale_avail, NULL , 0); + +struct st_sensor_odr_avl { + unsigned int hz; + u8 value; +}; + +struct st_sensor_odr { + u8 addr; + u8 mask; + struct st_sensor_odr_avl odr_avl[ST_SENSORS_ODR_LIST_MAX]; +}; + +struct st_sensor_power { + u8 addr; + u8 mask; + u8 value_off; + u8 value_on; +}; + +struct st_sensor_axis { + u8 addr; + u8 mask; +}; + +struct st_sensor_fullscale_avl { + unsigned int num; + u8 value; + unsigned int gain; + unsigned int gain2; +}; + +struct st_sensor_fullscale { + u8 addr; + u8 mask; + struct st_sensor_fullscale_avl fs_avl[ST_SENSORS_FULLSCALE_AVL_MAX]; +}; + +/** + * struct st_sensor_bdu - ST sensor device block data update + * @addr: address of the register. + * @mask: mask to write the block data update flag. + */ +struct st_sensor_bdu { + u8 addr; + u8 mask; +}; + +/** + * struct st_sensor_data_ready_irq - ST sensor device data-ready interrupt + * @addr: address of the register. + * @mask_int1: mask to enable/disable IRQ on INT1 pin. + * @mask_int2: mask to enable/disable IRQ on INT2 pin. + * struct ig1 - represents the Interrupt Generator 1 of sensors. + * @en_addr: address of the enable ig1 register. + * @en_mask: mask to write the on/off value for enable. + */ +struct st_sensor_data_ready_irq { + u8 addr; + u8 mask_int1; + u8 mask_int2; + struct { + u8 en_addr; + u8 en_mask; + } ig1; +}; + +/** + * struct st_sensor_transfer_buffer - ST sensor device I/O buffer + * @buf_lock: Mutex to protect rx and tx buffers. + * @tx_buf: Buffer used by SPI transfer function to send data to the sensors. + * This buffer is used to avoid DMA not-aligned issue. + * @rx_buf: Buffer used by SPI transfer to receive data from sensors. + * This buffer is used to avoid DMA not-aligned issue. + */ +struct st_sensor_transfer_buffer { + struct mutex buf_lock; + u8 rx_buf[ST_SENSORS_RX_MAX_LENGTH]; + u8 tx_buf[ST_SENSORS_TX_MAX_LENGTH] ____cacheline_aligned; +}; + +/** + * struct st_sensor_transfer_function - ST sensor device I/O function + * @read_byte: Function used to read one byte. + * @write_byte: Function used to write one byte. + * @read_multiple_byte: Function used to read multiple byte. + */ +struct st_sensor_transfer_function { + int (*read_byte) (struct st_sensor_transfer_buffer *tb, + struct device *dev, u8 reg_addr, u8 *res_byte); + int (*write_byte) (struct st_sensor_transfer_buffer *tb, + struct device *dev, u8 reg_addr, u8 data); + int (*read_multiple_byte) (struct st_sensor_transfer_buffer *tb, + struct device *dev, u8 reg_addr, int len, u8 *data, + bool multiread_bit); +}; + +/** + * struct st_sensor_settings - ST specific sensor settings + * @wai: Contents of WhoAmI register. + * @sensors_supported: List of supported sensors by struct itself. + * @ch: IIO channels for the sensor. + * @odr: Output data rate register and ODR list available. + * @pw: Power register of the sensor. + * @enable_axis: Enable one or more axis of the sensor. + * @fs: Full scale register and full scale list available. + * @bdu: Block data update register. + * @drdy_irq: Data ready register of the sensor. + * @multi_read_bit: Use or not particular bit for [I2C/SPI] multi-read. + * @bootime: samples to discard when sensor passing from power-down to power-up. + */ +struct st_sensor_settings { + u8 wai; + char sensors_supported[ST_SENSORS_MAX_4WAI][ST_SENSORS_MAX_NAME]; + struct iio_chan_spec *ch; + int num_ch; + struct st_sensor_odr odr; + struct st_sensor_power pw; + struct st_sensor_axis enable_axis; + struct st_sensor_fullscale fs; + struct st_sensor_bdu bdu; + struct st_sensor_data_ready_irq drdy_irq; + bool multi_read_bit; + unsigned int bootime; +}; + +/** + * struct st_sensor_data - ST sensor device status + * @dev: Pointer to instance of struct device (I2C or SPI). + * @trig: The trigger in use by the core driver. + * @sensor_settings: Pointer to the specific sensor settings in use. + * @current_fullscale: Maximum range of measure by the sensor. + * @vdd: Pointer to sensor's Vdd power supply + * @vdd_io: Pointer to sensor's Vdd-IO power supply + * @enabled: Status of the sensor (false->off, true->on). + * @multiread_bit: Use or not particular bit for [I2C/SPI] multiread. + * @buffer_data: Data used by buffer part. + * @odr: Output data rate of the sensor [Hz]. + * num_data_channels: Number of data channels used in buffer. + * @drdy_int_pin: Redirect DRDY on pin 1 (1) or pin 2 (2). + * @get_irq_data_ready: Function to get the IRQ used for data ready signal. + * @tf: Transfer function structure used by I/O operations. + * @tb: Transfer buffers and mutex used by I/O operations. + */ +struct st_sensor_data { + struct device *dev; + struct iio_trigger *trig; + struct st_sensor_settings *sensor_settings; + struct st_sensor_fullscale_avl *current_fullscale; + struct regulator *vdd; + struct regulator *vdd_io; + + bool enabled; + bool multiread_bit; + + char *buffer_data; + + unsigned int odr; + unsigned int num_data_channels; + + u8 drdy_int_pin; + + unsigned int (*get_irq_data_ready) (struct iio_dev *indio_dev); + + const struct st_sensor_transfer_function *tf; + struct st_sensor_transfer_buffer tb; +}; + +#ifdef CONFIG_IIO_BUFFER +irqreturn_t st_sensors_trigger_handler(int irq, void *p); + +int st_sensors_get_buffer_element(struct iio_dev *indio_dev, u8 *buf); +#endif + +#ifdef CONFIG_IIO_TRIGGER +int st_sensors_allocate_trigger(struct iio_dev *indio_dev, + const struct iio_trigger_ops *trigger_ops); + +void st_sensors_deallocate_trigger(struct iio_dev *indio_dev); + +#else +static inline int st_sensors_allocate_trigger(struct iio_dev *indio_dev, + const struct iio_trigger_ops *trigger_ops) +{ + return 0; +} +static inline void st_sensors_deallocate_trigger(struct iio_dev *indio_dev) +{ + return; +} +#endif + +int st_sensors_init_sensor(struct iio_dev *indio_dev, + struct st_sensors_platform_data *pdata); + +int st_sensors_set_enable(struct iio_dev *indio_dev, bool enable); + +int st_sensors_set_axis_enable(struct iio_dev *indio_dev, u8 axis_enable); + +void st_sensors_power_enable(struct iio_dev *indio_dev); + +void st_sensors_power_disable(struct iio_dev *indio_dev); + +int st_sensors_set_odr(struct iio_dev *indio_dev, unsigned int odr); + +int st_sensors_set_dataready_irq(struct iio_dev *indio_dev, bool enable); + +int st_sensors_set_fullscale_by_gain(struct iio_dev *indio_dev, int scale); + +int st_sensors_read_info_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *ch, int *val); + +int st_sensors_check_device_support(struct iio_dev *indio_dev, + int num_sensors_list, const struct st_sensor_settings *sensor_settings); + +ssize_t st_sensors_sysfs_sampling_frequency_avail(struct device *dev, + struct device_attribute *attr, char *buf); + +ssize_t st_sensors_sysfs_scale_avail(struct device *dev, + struct device_attribute *attr, char *buf); + +#endif /* ST_SENSORS_H */ diff --git a/include/linux/iio/common/st_sensors_i2c.h b/include/linux/iio/common/st_sensors_i2c.h new file mode 100644 index 000000000..1796af093 --- /dev/null +++ b/include/linux/iio/common/st_sensors_i2c.h @@ -0,0 +1,31 @@ +/* + * STMicroelectronics sensors i2c library driver + * + * Copyright 2012-2013 STMicroelectronics Inc. + * + * Denis Ciocca <denis.ciocca@st.com> + * + * Licensed under the GPL-2. + */ + +#ifndef ST_SENSORS_I2C_H +#define ST_SENSORS_I2C_H + +#include <linux/i2c.h> +#include <linux/iio/common/st_sensors.h> +#include <linux/of.h> + +void st_sensors_i2c_configure(struct iio_dev *indio_dev, + struct i2c_client *client, struct st_sensor_data *sdata); + +#ifdef CONFIG_OF +void st_sensors_of_i2c_probe(struct i2c_client *client, + const struct of_device_id *match); +#else +static inline void st_sensors_of_i2c_probe(struct i2c_client *client, + const struct of_device_id *match) +{ +} +#endif + +#endif /* ST_SENSORS_I2C_H */ diff --git a/include/linux/iio/common/st_sensors_spi.h b/include/linux/iio/common/st_sensors_spi.h new file mode 100644 index 000000000..d964a3563 --- /dev/null +++ b/include/linux/iio/common/st_sensors_spi.h @@ -0,0 +1,20 @@ +/* + * STMicroelectronics sensors spi library driver + * + * Copyright 2012-2013 STMicroelectronics Inc. + * + * Denis Ciocca <denis.ciocca@st.com> + * + * Licensed under the GPL-2. + */ + +#ifndef ST_SENSORS_SPI_H +#define ST_SENSORS_SPI_H + +#include <linux/spi/spi.h> +#include <linux/iio/common/st_sensors.h> + +void st_sensors_spi_configure(struct iio_dev *indio_dev, + struct spi_device *spi, struct st_sensor_data *sdata); + +#endif /* ST_SENSORS_SPI_H */ diff --git a/include/linux/iio/consumer.h b/include/linux/iio/consumer.h new file mode 100644 index 000000000..26fb8f634 --- /dev/null +++ b/include/linux/iio/consumer.h @@ -0,0 +1,209 @@ +/* + * Industrial I/O in kernel consumer interface + * + * Copyright (c) 2011 Jonathan Cameron + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation. + */ +#ifndef _IIO_INKERN_CONSUMER_H_ +#define _IIO_INKERN_CONSUMER_H_ + +#include <linux/types.h> +#include <linux/iio/types.h> + +struct iio_dev; +struct iio_chan_spec; +struct device; + +/** + * struct iio_channel - everything needed for a consumer to use a channel + * @indio_dev: Device on which the channel exists. + * @channel: Full description of the channel. + * @data: Data about the channel used by consumer. + */ +struct iio_channel { + struct iio_dev *indio_dev; + const struct iio_chan_spec *channel; + void *data; +}; + +/** + * iio_channel_get() - get description of all that is needed to access channel. + * @dev: Pointer to consumer device. Device name must match + * the name of the device as provided in the iio_map + * with which the desired provider to consumer mapping + * was registered. + * @consumer_channel: Unique name to identify the channel on the consumer + * side. This typically describes the channels use within + * the consumer. E.g. 'battery_voltage' + */ +struct iio_channel *iio_channel_get(struct device *dev, + const char *consumer_channel); + +/** + * iio_channel_release() - release channels obtained via iio_channel_get + * @chan: The channel to be released. + */ +void iio_channel_release(struct iio_channel *chan); + +/** + * iio_channel_get_all() - get all channels associated with a client + * @dev: Pointer to consumer device. + * + * Returns an array of iio_channel structures terminated with one with + * null iio_dev pointer. + * This function is used by fairly generic consumers to get all the + * channels registered as having this consumer. + */ +struct iio_channel *iio_channel_get_all(struct device *dev); + +/** + * iio_channel_release_all() - reverse iio_channel_get_all + * @chan: Array of channels to be released. + */ +void iio_channel_release_all(struct iio_channel *chan); + +struct iio_cb_buffer; +/** + * iio_channel_get_all_cb() - register callback for triggered capture + * @dev: Pointer to client device. + * @cb: Callback function. + * @private: Private data passed to callback. + * + * NB right now we have no ability to mux data from multiple devices. + * So if the channels requested come from different devices this will + * fail. + */ +struct iio_cb_buffer *iio_channel_get_all_cb(struct device *dev, + int (*cb)(const void *data, + void *private), + void *private); +/** + * iio_channel_release_all_cb() - release and unregister the callback. + * @cb_buffer: The callback buffer that was allocated. + */ +void iio_channel_release_all_cb(struct iio_cb_buffer *cb_buffer); + +/** + * iio_channel_start_all_cb() - start the flow of data through callback. + * @cb_buff: The callback buffer we are starting. + */ +int iio_channel_start_all_cb(struct iio_cb_buffer *cb_buff); + +/** + * iio_channel_stop_all_cb() - stop the flow of data through the callback. + * @cb_buff: The callback buffer we are stopping. + */ +void iio_channel_stop_all_cb(struct iio_cb_buffer *cb_buff); + +/** + * iio_channel_cb_get_channels() - get access to the underlying channels. + * @cb_buff: The callback buffer from whom we want the channel + * information. + * + * This function allows one to obtain information about the channels. + * Whilst this may allow direct reading if all buffers are disabled, the + * primary aim is to allow drivers that are consuming a channel to query + * things like scaling of the channel. + */ +struct iio_channel +*iio_channel_cb_get_channels(const struct iio_cb_buffer *cb_buffer); + +/** + * iio_read_channel_raw() - read from a given channel + * @chan: The channel being queried. + * @val: Value read back. + * + * Note raw reads from iio channels are in adc counts and hence + * scale will need to be applied if standard units required. + */ +int iio_read_channel_raw(struct iio_channel *chan, + int *val); + +/** + * iio_read_channel_average_raw() - read from a given channel + * @chan: The channel being queried. + * @val: Value read back. + * + * Note raw reads from iio channels are in adc counts and hence + * scale will need to be applied if standard units required. + * + * In opposit to the normal iio_read_channel_raw this function + * returns the average of multiple reads. + */ +int iio_read_channel_average_raw(struct iio_channel *chan, int *val); + +/** + * iio_read_channel_processed() - read processed value from a given channel + * @chan: The channel being queried. + * @val: Value read back. + * + * Returns an error code or 0. + * + * This function will read a processed value from a channel. A processed value + * means that this value will have the correct unit and not some device internal + * representation. If the device does not support reporting a processed value + * the function will query the raw value and the channels scale and offset and + * do the appropriate transformation. + */ +int iio_read_channel_processed(struct iio_channel *chan, int *val); + +/** + * iio_write_channel_raw() - write to a given channel + * @chan: The channel being queried. + * @val: Value being written. + * + * Note raw writes to iio channels are in dac counts and hence + * scale will need to be applied if standard units required. + */ +int iio_write_channel_raw(struct iio_channel *chan, int val); + +/** + * iio_get_channel_type() - get the type of a channel + * @channel: The channel being queried. + * @type: The type of the channel. + * + * returns the enum iio_chan_type of the channel + */ +int iio_get_channel_type(struct iio_channel *channel, + enum iio_chan_type *type); + +/** + * iio_read_channel_scale() - read the scale value for a channel + * @chan: The channel being queried. + * @val: First part of value read back. + * @val2: Second part of value read back. + * + * Note returns a description of what is in val and val2, such + * as IIO_VAL_INT_PLUS_MICRO telling us we have a value of val + * + val2/1e6 + */ +int iio_read_channel_scale(struct iio_channel *chan, int *val, + int *val2); + +/** + * iio_convert_raw_to_processed() - Converts a raw value to a processed value + * @chan: The channel being queried + * @raw: The raw IIO to convert + * @processed: The result of the conversion + * @scale: Scale factor to apply during the conversion + * + * Returns an error code or 0. + * + * This function converts a raw value to processed value for a specific channel. + * A raw value is the device internal representation of a sample and the value + * returned by iio_read_channel_raw, so the unit of that value is device + * depended. A processed value on the other hand is value has a normed unit + * according with the IIO specification. + * + * The scale factor allows to increase the precession of the returned value. For + * a scale factor of 1 the function will return the result in the normal IIO + * unit for the channel type. E.g. millivolt for voltage channels, if you want + * nanovolts instead pass 1000000 as the scale factor. + */ +int iio_convert_raw_to_processed(struct iio_channel *chan, int raw, + int *processed, unsigned int scale); + +#endif diff --git a/include/linux/iio/dac/ad5421.h b/include/linux/iio/dac/ad5421.h new file mode 100644 index 000000000..8fd8f057a --- /dev/null +++ b/include/linux/iio/dac/ad5421.h @@ -0,0 +1,28 @@ +#ifndef __IIO_DAC_AD5421_H__ +#define __IIO_DAC_AD5421_H__ + +/** + * enum ad5421_current_range - Current range the AD5421 is configured for. + * @AD5421_CURRENT_RANGE_4mA_20mA: 4 mA to 20 mA (RANGE1,0 pins = 00) + * @AD5421_CURRENT_RANGE_3mA8_21mA: 3.8 mA to 21 mA (RANGE1,0 pins = x1) + * @AD5421_CURRENT_RANGE_3mA2_24mA: 3.2 mA to 24 mA (RANGE1,0 pins = 10) + */ + +enum ad5421_current_range { + AD5421_CURRENT_RANGE_4mA_20mA, + AD5421_CURRENT_RANGE_3mA8_21mA, + AD5421_CURRENT_RANGE_3mA2_24mA, +}; + +/** + * struct ad5421_platform_data - AD5421 DAC driver platform data + * @external_vref: whether an external reference voltage is used or not + * @current_range: Current range the AD5421 is configured for + */ + +struct ad5421_platform_data { + bool external_vref; + enum ad5421_current_range current_range; +}; + +#endif diff --git a/include/linux/iio/dac/ad5504.h b/include/linux/iio/dac/ad5504.h new file mode 100644 index 000000000..43895376a --- /dev/null +++ b/include/linux/iio/dac/ad5504.h @@ -0,0 +1,16 @@ +/* + * AD5504 SPI DAC driver + * + * Copyright 2011 Analog Devices Inc. + * + * Licensed under the GPL-2. + */ + +#ifndef SPI_AD5504_H_ +#define SPI_AD5504_H_ + +struct ad5504_platform_data { + u16 vref_mv; +}; + +#endif /* SPI_AD5504_H_ */ diff --git a/include/linux/iio/dac/ad5791.h b/include/linux/iio/dac/ad5791.h new file mode 100644 index 000000000..45ee281c6 --- /dev/null +++ b/include/linux/iio/dac/ad5791.h @@ -0,0 +1,25 @@ +/* + * AD5791 SPI DAC driver + * + * Copyright 2011 Analog Devices Inc. + * + * Licensed under the GPL-2. + */ + +#ifndef SPI_AD5791_H_ +#define SPI_AD5791_H_ + +/** + * struct ad5791_platform_data - platform specific information + * @vref_pos_mv: Vdd Positive Analog Supply Volatge (mV) + * @vref_neg_mv: Vdd Negative Analog Supply Volatge (mV) + * @use_rbuf_gain2: ext. amplifier connected in gain of two configuration + */ + +struct ad5791_platform_data { + u16 vref_pos_mv; + u16 vref_neg_mv; + bool use_rbuf_gain2; +}; + +#endif /* SPI_AD5791_H_ */ diff --git a/include/linux/iio/dac/max517.h b/include/linux/iio/dac/max517.h new file mode 100644 index 000000000..7668716cd --- /dev/null +++ b/include/linux/iio/dac/max517.h @@ -0,0 +1,15 @@ +/* + * MAX517 DAC driver + * + * Copyright 2011 Roland Stigge <stigge@antcom.de> + * + * Licensed under the GPL-2 or later. + */ +#ifndef IIO_DAC_MAX517_H_ +#define IIO_DAC_MAX517_H_ + +struct max517_platform_data { + u16 vref_mv[8]; +}; + +#endif /* IIO_DAC_MAX517_H_ */ diff --git a/include/linux/iio/dac/mcp4725.h b/include/linux/iio/dac/mcp4725.h new file mode 100644 index 000000000..91530e661 --- /dev/null +++ b/include/linux/iio/dac/mcp4725.h @@ -0,0 +1,16 @@ +/* + * MCP4725 DAC driver + * + * Copyright (C) 2012 Peter Meerwald <pmeerw@pmeerw.net> + * + * Licensed under the GPL-2 or later. + */ + +#ifndef IIO_DAC_MCP4725_H_ +#define IIO_DAC_MCP4725_H_ + +struct mcp4725_platform_data { + u16 vref_mv; +}; + +#endif /* IIO_DAC_MCP4725_H_ */ diff --git a/include/linux/iio/driver.h b/include/linux/iio/driver.h new file mode 100644 index 000000000..7dfb10ee2 --- /dev/null +++ b/include/linux/iio/driver.h @@ -0,0 +1,31 @@ +/* + * Industrial I/O in kernel access map interface. + * + * Copyright (c) 2011 Jonathan Cameron + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation. + */ + +#ifndef _IIO_INKERN_H_ +#define _IIO_INKERN_H_ + +struct iio_map; + +/** + * iio_map_array_register() - tell the core about inkernel consumers + * @indio_dev: provider device + * @map: array of mappings specifying association of channel with client + */ +int iio_map_array_register(struct iio_dev *indio_dev, + struct iio_map *map); + +/** + * iio_map_array_unregister() - tell the core to remove consumer mappings for + * the given provider device + * @indio_dev: provider device + */ +int iio_map_array_unregister(struct iio_dev *indio_dev); + +#endif diff --git a/include/linux/iio/events.h b/include/linux/iio/events.h new file mode 100644 index 000000000..8ad87d1c5 --- /dev/null +++ b/include/linux/iio/events.h @@ -0,0 +1,59 @@ +/* The industrial I/O - event passing to userspace + * + * Copyright (c) 2008-2011 Jonathan Cameron + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation. + */ +#ifndef _IIO_EVENTS_H_ +#define _IIO_EVENTS_H_ + +#include <linux/iio/types.h> +#include <uapi/linux/iio/events.h> + +/** + * IIO_EVENT_CODE() - create event identifier + * @chan_type: Type of the channel. Should be one of enum iio_chan_type. + * @diff: Whether the event is for an differential channel or not. + * @modifier: Modifier for the channel. Should be one of enum iio_modifier. + * @direction: Direction of the event. One of enum iio_event_direction. + * @type: Type of the event. Should be one of enum iio_event_type. + * @chan: Channel number for non-differential channels. + * @chan1: First channel number for differential channels. + * @chan2: Second channel number for differential channels. + */ + +#define IIO_EVENT_CODE(chan_type, diff, modifier, direction, \ + type, chan, chan1, chan2) \ + (((u64)type << 56) | ((u64)diff << 55) | \ + ((u64)direction << 48) | ((u64)modifier << 40) | \ + ((u64)chan_type << 32) | (((u16)chan2) << 16) | ((u16)chan1) | \ + ((u16)chan)) + + +/** + * IIO_MOD_EVENT_CODE() - create event identifier for modified channels + * @chan_type: Type of the channel. Should be one of enum iio_chan_type. + * @number: Channel number. + * @modifier: Modifier for the channel. Should be one of enum iio_modifier. + * @type: Type of the event. Should be one of enum iio_event_type. + * @direction: Direction of the event. One of enum iio_event_direction. + */ + +#define IIO_MOD_EVENT_CODE(chan_type, number, modifier, \ + type, direction) \ + IIO_EVENT_CODE(chan_type, 0, modifier, direction, type, number, 0, 0) + +/** + * IIO_UNMOD_EVENT_CODE() - create event identifier for unmodified channels + * @chan_type: Type of the channel. Should be one of enum iio_chan_type. + * @number: Channel number. + * @type: Type of the event. Should be one of enum iio_event_type. + * @direction: Direction of the event. One of enum iio_event_direction. + */ + +#define IIO_UNMOD_EVENT_CODE(chan_type, number, type, direction) \ + IIO_EVENT_CODE(chan_type, 0, 0, direction, type, number, 0, 0) + +#endif diff --git a/include/linux/iio/frequency/ad9523.h b/include/linux/iio/frequency/ad9523.h new file mode 100644 index 000000000..12ce3ee42 --- /dev/null +++ b/include/linux/iio/frequency/ad9523.h @@ -0,0 +1,195 @@ +/* + * AD9523 SPI Low Jitter Clock Generator + * + * Copyright 2012 Analog Devices Inc. + * + * Licensed under the GPL-2. + */ + +#ifndef IIO_FREQUENCY_AD9523_H_ +#define IIO_FREQUENCY_AD9523_H_ + +enum outp_drv_mode { + TRISTATE, + LVPECL_8mA, + LVDS_4mA, + LVDS_7mA, + HSTL0_16mA, + HSTL1_8mA, + CMOS_CONF1, + CMOS_CONF2, + CMOS_CONF3, + CMOS_CONF4, + CMOS_CONF5, + CMOS_CONF6, + CMOS_CONF7, + CMOS_CONF8, + CMOS_CONF9 +}; + +enum ref_sel_mode { + NONEREVERTIVE_STAY_ON_REFB, + REVERT_TO_REFA, + SELECT_REFA, + SELECT_REFB, + EXT_REF_SEL +}; + +/** + * struct ad9523_channel_spec - Output channel configuration + * + * @channel_num: Output channel number. + * @divider_output_invert_en: Invert the polarity of the output clock. + * @sync_ignore_en: Ignore chip-level SYNC signal. + * @low_power_mode_en: Reduce power used in the differential output modes. + * @use_alt_clock_src: Channel divider uses alternative clk source. + * @output_dis: Disables, powers down the entire channel. + * @driver_mode: Output driver mode (logic level family). + * @divider_phase: Divider initial phase after a SYNC. Range 0..63 + LSB = 1/2 of a period of the divider input clock. + * @channel_divider: 10-bit channel divider. + * @extended_name: Optional descriptive channel name. + */ + +struct ad9523_channel_spec { + unsigned channel_num; + bool divider_output_invert_en; + bool sync_ignore_en; + bool low_power_mode_en; + /* CH0..CH3 VCXO, CH4..CH9 VCO2 */ + bool use_alt_clock_src; + bool output_dis; + enum outp_drv_mode driver_mode; + unsigned char divider_phase; + unsigned short channel_divider; + char extended_name[16]; +}; + +enum pll1_rzero_resistor { + RZERO_883_OHM, + RZERO_677_OHM, + RZERO_341_OHM, + RZERO_135_OHM, + RZERO_10_OHM, + RZERO_USE_EXT_RES = 8, +}; + +enum rpole2_resistor { + RPOLE2_900_OHM, + RPOLE2_450_OHM, + RPOLE2_300_OHM, + RPOLE2_225_OHM, +}; + +enum rzero_resistor { + RZERO_3250_OHM, + RZERO_2750_OHM, + RZERO_2250_OHM, + RZERO_2100_OHM, + RZERO_3000_OHM, + RZERO_2500_OHM, + RZERO_2000_OHM, + RZERO_1850_OHM, +}; + +enum cpole1_capacitor { + CPOLE1_0_PF, + CPOLE1_8_PF, + CPOLE1_16_PF, + CPOLE1_24_PF, + _CPOLE1_24_PF, /* place holder */ + CPOLE1_32_PF, + CPOLE1_40_PF, + CPOLE1_48_PF, +}; + +/** + * struct ad9523_platform_data - platform specific information + * + * @vcxo_freq: External VCXO frequency in Hz + * @refa_diff_rcv_en: REFA differential/single-ended input selection. + * @refb_diff_rcv_en: REFB differential/single-ended input selection. + * @zd_in_diff_en: Zero Delay differential/single-ended input selection. + * @osc_in_diff_en: OSC differential/ single-ended input selection. + * @refa_cmos_neg_inp_en: REFA single-ended neg./pos. input enable. + * @refb_cmos_neg_inp_en: REFB single-ended neg./pos. input enable. + * @zd_in_cmos_neg_inp_en: Zero Delay single-ended neg./pos. input enable. + * @osc_in_cmos_neg_inp_en: OSC single-ended neg./pos. input enable. + * @refa_r_div: PLL1 10-bit REFA R divider. + * @refb_r_div: PLL1 10-bit REFB R divider. + * @pll1_feedback_div: PLL1 10-bit Feedback N divider. + * @pll1_charge_pump_current_nA: Magnitude of PLL1 charge pump current (nA). + * @zero_delay_mode_internal_en: Internal, external Zero Delay mode selection. + * @osc_in_feedback_en: PLL1 feedback path, local feedback from + * the OSC_IN receiver or zero delay mode + * @pll1_loop_filter_rzero: PLL1 Loop Filter Zero Resistor selection. + * @ref_mode: Reference selection mode. + * @pll2_charge_pump_current_nA: Magnitude of PLL2 charge pump current (nA). + * @pll2_ndiv_a_cnt: PLL2 Feedback N-divider, A Counter, range 0..4. + * @pll2_ndiv_b_cnt: PLL2 Feedback N-divider, B Counter, range 0..63. + * @pll2_freq_doubler_en: PLL2 frequency doubler enable. + * @pll2_r2_div: PLL2 R2 divider, range 0..31. + * @pll2_vco_diff_m1: VCO1 divider, range 3..5. + * @pll2_vco_diff_m2: VCO2 divider, range 3..5. + * @rpole2: PLL2 loop filter Rpole resistor value. + * @rzero: PLL2 loop filter Rzero resistor value. + * @cpole1: PLL2 loop filter Cpole capacitor value. + * @rzero_bypass_en: PLL2 loop filter Rzero bypass enable. + * @num_channels: Array size of struct ad9523_channel_spec. + * @channels: Pointer to channel array. + * @name: Optional alternative iio device name. + */ + +struct ad9523_platform_data { + unsigned long vcxo_freq; + + /* Differential/ Single-Ended Input Configuration */ + bool refa_diff_rcv_en; + bool refb_diff_rcv_en; + bool zd_in_diff_en; + bool osc_in_diff_en; + + /* + * Valid if differential input disabled + * if false defaults to pos input + */ + bool refa_cmos_neg_inp_en; + bool refb_cmos_neg_inp_en; + bool zd_in_cmos_neg_inp_en; + bool osc_in_cmos_neg_inp_en; + + /* PLL1 Setting */ + unsigned short refa_r_div; + unsigned short refb_r_div; + unsigned short pll1_feedback_div; + unsigned short pll1_charge_pump_current_nA; + bool zero_delay_mode_internal_en; + bool osc_in_feedback_en; + enum pll1_rzero_resistor pll1_loop_filter_rzero; + + /* Reference */ + enum ref_sel_mode ref_mode; + + /* PLL2 Setting */ + unsigned int pll2_charge_pump_current_nA; + unsigned char pll2_ndiv_a_cnt; + unsigned char pll2_ndiv_b_cnt; + bool pll2_freq_doubler_en; + unsigned char pll2_r2_div; + unsigned char pll2_vco_diff_m1; /* 3..5 */ + unsigned char pll2_vco_diff_m2; /* 3..5 */ + + /* Loop Filter PLL2 */ + enum rpole2_resistor rpole2; + enum rzero_resistor rzero; + enum cpole1_capacitor cpole1; + bool rzero_bypass_en; + + /* Output Channel Configuration */ + int num_channels; + struct ad9523_channel_spec *channels; + + char name[SPI_NAME_SIZE]; +}; + +#endif /* IIO_FREQUENCY_AD9523_H_ */ diff --git a/include/linux/iio/frequency/adf4350.h b/include/linux/iio/frequency/adf4350.h new file mode 100644 index 000000000..ffd8c8f90 --- /dev/null +++ b/include/linux/iio/frequency/adf4350.h @@ -0,0 +1,128 @@ +/* + * ADF4350/ADF4351 SPI PLL driver + * + * Copyright 2012-2013 Analog Devices Inc. + * + * Licensed under the GPL-2. + */ + +#ifndef IIO_PLL_ADF4350_H_ +#define IIO_PLL_ADF4350_H_ + +/* Registers */ +#define ADF4350_REG0 0 +#define ADF4350_REG1 1 +#define ADF4350_REG2 2 +#define ADF4350_REG3 3 +#define ADF4350_REG4 4 +#define ADF4350_REG5 5 + +/* REG0 Bit Definitions */ +#define ADF4350_REG0_FRACT(x) (((x) & 0xFFF) << 3) +#define ADF4350_REG0_INT(x) (((x) & 0xFFFF) << 15) + +/* REG1 Bit Definitions */ +#define ADF4350_REG1_MOD(x) (((x) & 0xFFF) << 3) +#define ADF4350_REG1_PHASE(x) (((x) & 0xFFF) << 15) +#define ADF4350_REG1_PRESCALER (1 << 27) + +/* REG2 Bit Definitions */ +#define ADF4350_REG2_COUNTER_RESET_EN (1 << 3) +#define ADF4350_REG2_CP_THREESTATE_EN (1 << 4) +#define ADF4350_REG2_POWER_DOWN_EN (1 << 5) +#define ADF4350_REG2_PD_POLARITY_POS (1 << 6) +#define ADF4350_REG2_LDP_6ns (1 << 7) +#define ADF4350_REG2_LDP_10ns (0 << 7) +#define ADF4350_REG2_LDF_FRACT_N (0 << 8) +#define ADF4350_REG2_LDF_INT_N (1 << 8) +#define ADF4350_REG2_CHARGE_PUMP_CURR_uA(x) (((((x)-312) / 312) & 0xF) << 9) +#define ADF4350_REG2_DOUBLE_BUFF_EN (1 << 13) +#define ADF4350_REG2_10BIT_R_CNT(x) ((x) << 14) +#define ADF4350_REG2_RDIV2_EN (1 << 24) +#define ADF4350_REG2_RMULT2_EN (1 << 25) +#define ADF4350_REG2_MUXOUT(x) ((x) << 26) +#define ADF4350_REG2_NOISE_MODE(x) (((unsigned)(x)) << 29) +#define ADF4350_MUXOUT_THREESTATE 0 +#define ADF4350_MUXOUT_DVDD 1 +#define ADF4350_MUXOUT_GND 2 +#define ADF4350_MUXOUT_R_DIV_OUT 3 +#define ADF4350_MUXOUT_N_DIV_OUT 4 +#define ADF4350_MUXOUT_ANALOG_LOCK_DETECT 5 +#define ADF4350_MUXOUT_DIGITAL_LOCK_DETECT 6 + +/* REG3 Bit Definitions */ +#define ADF4350_REG3_12BIT_CLKDIV(x) ((x) << 3) +#define ADF4350_REG3_12BIT_CLKDIV_MODE(x) ((x) << 16) +#define ADF4350_REG3_12BIT_CSR_EN (1 << 18) +#define ADF4351_REG3_CHARGE_CANCELLATION_EN (1 << 21) +#define ADF4351_REG3_ANTI_BACKLASH_3ns_EN (1 << 22) +#define ADF4351_REG3_BAND_SEL_CLOCK_MODE_HIGH (1 << 23) + +/* REG4 Bit Definitions */ +#define ADF4350_REG4_OUTPUT_PWR(x) ((x) << 3) +#define ADF4350_REG4_RF_OUT_EN (1 << 5) +#define ADF4350_REG4_AUX_OUTPUT_PWR(x) ((x) << 6) +#define ADF4350_REG4_AUX_OUTPUT_EN (1 << 8) +#define ADF4350_REG4_AUX_OUTPUT_FUND (1 << 9) +#define ADF4350_REG4_AUX_OUTPUT_DIV (0 << 9) +#define ADF4350_REG4_MUTE_TILL_LOCK_EN (1 << 10) +#define ADF4350_REG4_VCO_PWRDOWN_EN (1 << 11) +#define ADF4350_REG4_8BIT_BAND_SEL_CLKDIV(x) ((x) << 12) +#define ADF4350_REG4_RF_DIV_SEL(x) ((x) << 20) +#define ADF4350_REG4_FEEDBACK_DIVIDED (0 << 23) +#define ADF4350_REG4_FEEDBACK_FUND (1 << 23) + +/* REG5 Bit Definitions */ +#define ADF4350_REG5_LD_PIN_MODE_LOW (0 << 22) +#define ADF4350_REG5_LD_PIN_MODE_DIGITAL (1 << 22) +#define ADF4350_REG5_LD_PIN_MODE_HIGH (3 << 22) + +/* Specifications */ +#define ADF4350_MAX_OUT_FREQ 4400000000ULL /* Hz */ +#define ADF4350_MIN_OUT_FREQ 137500000 /* Hz */ +#define ADF4351_MIN_OUT_FREQ 34375000 /* Hz */ +#define ADF4350_MIN_VCO_FREQ 2200000000ULL /* Hz */ +#define ADF4350_MAX_FREQ_45_PRESC 3000000000ULL /* Hz */ +#define ADF4350_MAX_FREQ_PFD 32000000 /* Hz */ +#define ADF4350_MAX_BANDSEL_CLK 125000 /* Hz */ +#define ADF4350_MAX_FREQ_REFIN 250000000 /* Hz */ +#define ADF4350_MAX_MODULUS 4095 +#define ADF4350_MAX_R_CNT 1023 + + +/** + * struct adf4350_platform_data - platform specific information + * @name: Optional device name. + * @clkin: REFin frequency in Hz. + * @channel_spacing: Channel spacing in Hz (influences MODULUS). + * @power_up_frequency: Optional, If set in Hz the PLL tunes to the desired + * frequency on probe. + * @ref_div_factor: Optional, if set the driver skips dynamic calculation + * and uses this default value instead. + * @ref_doubler_en: Enables reference doubler. + * @ref_div2_en: Enables reference divider. + * @r2_user_settings: User defined settings for ADF4350/1 REGISTER_2. + * @r3_user_settings: User defined settings for ADF4350/1 REGISTER_3. + * @r4_user_settings: User defined settings for ADF4350/1 REGISTER_4. + * @gpio_lock_detect: Optional, if set with a valid GPIO number, + * pll lock state is tested upon read. + * If not used - set to -1. + */ + +struct adf4350_platform_data { + char name[32]; + unsigned long clkin; + unsigned long channel_spacing; + unsigned long long power_up_frequency; + + unsigned short ref_div_factor; /* 10-bit R counter */ + bool ref_doubler_en; + bool ref_div2_en; + + unsigned r2_user_settings; + unsigned r3_user_settings; + unsigned r4_user_settings; + int gpio_lock_detect; +}; + +#endif /* IIO_PLL_ADF4350_H_ */ diff --git a/include/linux/iio/gyro/itg3200.h b/include/linux/iio/gyro/itg3200.h new file mode 100644 index 000000000..2a820850f --- /dev/null +++ b/include/linux/iio/gyro/itg3200.h @@ -0,0 +1,154 @@ +/* + * itg3200.h -- support InvenSense ITG3200 + * Digital 3-Axis Gyroscope driver + * + * Copyright (c) 2011 Christian Strobel <christian.strobel@iis.fraunhofer.de> + * Copyright (c) 2011 Manuel Stahl <manuel.stahl@iis.fraunhofer.de> + * Copyright (c) 2012 Thorsten Nowak <thorsten.nowak@iis.fraunhofer.de> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef I2C_ITG3200_H_ +#define I2C_ITG3200_H_ + +#include <linux/iio/iio.h> + +/* Register with I2C address (34h) */ +#define ITG3200_REG_ADDRESS 0x00 + +/* Sample rate divider + * Range: 0 to 255 + * Default value: 0x00 */ +#define ITG3200_REG_SAMPLE_RATE_DIV 0x15 + +/* Digital low pass filter settings */ +#define ITG3200_REG_DLPF 0x16 +/* DLPF full scale range */ +#define ITG3200_DLPF_FS_SEL_2000 0x18 +/* Bandwidth (Hz) and internal sample rate + * (kHz) of DLPF */ +#define ITG3200_DLPF_256_8 0x00 +#define ITG3200_DLPF_188_1 0x01 +#define ITG3200_DLPF_98_1 0x02 +#define ITG3200_DLPF_42_1 0x03 +#define ITG3200_DLPF_20_1 0x04 +#define ITG3200_DLPF_10_1 0x05 +#define ITG3200_DLPF_5_1 0x06 + +#define ITG3200_DLPF_CFG_MASK 0x07 + +/* Configuration for interrupt operations */ +#define ITG3200_REG_IRQ_CONFIG 0x17 +/* Logic level */ +#define ITG3200_IRQ_ACTIVE_LOW 0x80 +#define ITG3200_IRQ_ACTIVE_HIGH 0x00 +/* Drive type */ +#define ITG3200_IRQ_OPEN_DRAIN 0x40 +#define ITG3200_IRQ_PUSH_PULL 0x00 +/* Latch mode */ +#define ITG3200_IRQ_LATCH_UNTIL_CLEARED 0x20 +#define ITG3200_IRQ_LATCH_50US_PULSE 0x00 +/* Latch clear method */ +#define ITG3200_IRQ_LATCH_CLEAR_ANY 0x10 +#define ITG3200_IRQ_LATCH_CLEAR_STATUS 0x00 +/* Enable interrupt when device is ready */ +#define ITG3200_IRQ_DEVICE_RDY_ENABLE 0x04 +/* Enable interrupt when data is available */ +#define ITG3200_IRQ_DATA_RDY_ENABLE 0x01 + +/* Determine the status of ITG-3200 interrupts */ +#define ITG3200_REG_IRQ_STATUS 0x1A +/* Status of 'device is ready'-interrupt */ +#define ITG3200_IRQ_DEVICE_RDY_STATUS 0x04 +/* Status of 'data is available'-interrupt */ +#define ITG3200_IRQ_DATA_RDY_STATUS 0x01 + +/* Sensor registers */ +#define ITG3200_REG_TEMP_OUT_H 0x1B +#define ITG3200_REG_TEMP_OUT_L 0x1C +#define ITG3200_REG_GYRO_XOUT_H 0x1D +#define ITG3200_REG_GYRO_XOUT_L 0x1E +#define ITG3200_REG_GYRO_YOUT_H 0x1F +#define ITG3200_REG_GYRO_YOUT_L 0x20 +#define ITG3200_REG_GYRO_ZOUT_H 0x21 +#define ITG3200_REG_GYRO_ZOUT_L 0x22 + +/* Power management */ +#define ITG3200_REG_POWER_MANAGEMENT 0x3E +/* Reset device and internal registers to the + * power-up-default settings */ +#define ITG3200_RESET 0x80 +/* Enable low power sleep mode */ +#define ITG3200_SLEEP 0x40 +/* Put according gyroscope in standby mode */ +#define ITG3200_STANDBY_GYRO_X 0x20 +#define ITG3200_STANDBY_GYRO_Y 0x10 +#define ITG3200_STANDBY_GYRO_Z 0x08 +/* Determine the device clock source */ +#define ITG3200_CLK_INTERNAL 0x00 +#define ITG3200_CLK_GYRO_X 0x01 +#define ITG3200_CLK_GYRO_Y 0x02 +#define ITG3200_CLK_GYRO_Z 0x03 +#define ITG3200_CLK_EXT_32K 0x04 +#define ITG3200_CLK_EXT_19M 0x05 + + +/** + * struct itg3200 - device instance specific data + * @i2c: actual i2c_client + * @trig: data ready trigger from itg3200 pin + **/ +struct itg3200 { + struct i2c_client *i2c; + struct iio_trigger *trig; +}; + +enum ITG3200_SCAN_INDEX { + ITG3200_SCAN_TEMP, + ITG3200_SCAN_GYRO_X, + ITG3200_SCAN_GYRO_Y, + ITG3200_SCAN_GYRO_Z, + ITG3200_SCAN_ELEMENTS, +}; + +int itg3200_write_reg_8(struct iio_dev *indio_dev, + u8 reg_address, u8 val); + +int itg3200_read_reg_8(struct iio_dev *indio_dev, + u8 reg_address, u8 *val); + + +#ifdef CONFIG_IIO_BUFFER + +void itg3200_remove_trigger(struct iio_dev *indio_dev); +int itg3200_probe_trigger(struct iio_dev *indio_dev); + +int itg3200_buffer_configure(struct iio_dev *indio_dev); +void itg3200_buffer_unconfigure(struct iio_dev *indio_dev); + +#else /* CONFIG_IIO_BUFFER */ + +static inline void itg3200_remove_trigger(struct iio_dev *indio_dev) +{ +} + +static inline int itg3200_probe_trigger(struct iio_dev *indio_dev) +{ + return 0; +} + +static inline int itg3200_buffer_configure(struct iio_dev *indio_dev) +{ + return 0; +} + +static inline void itg3200_buffer_unconfigure(struct iio_dev *indio_dev) +{ +} + +#endif /* CONFIG_IIO_BUFFER */ + +#endif /* ITG3200_H_ */ diff --git a/include/linux/iio/iio.h b/include/linux/iio/iio.h new file mode 100644 index 000000000..d86b753e9 --- /dev/null +++ b/include/linux/iio/iio.h @@ -0,0 +1,652 @@ + +/* The industrial I/O core + * + * Copyright (c) 2008 Jonathan Cameron + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation. + */ +#ifndef _INDUSTRIAL_IO_H_ +#define _INDUSTRIAL_IO_H_ + +#include <linux/device.h> +#include <linux/cdev.h> +#include <linux/iio/types.h> +#include <linux/of.h> +/* IIO TODO LIST */ +/* + * Provide means of adjusting timer accuracy. + * Currently assumes nano seconds. + */ + +enum iio_chan_info_enum { + IIO_CHAN_INFO_RAW = 0, + IIO_CHAN_INFO_PROCESSED, + IIO_CHAN_INFO_SCALE, + IIO_CHAN_INFO_OFFSET, + IIO_CHAN_INFO_CALIBSCALE, + IIO_CHAN_INFO_CALIBBIAS, + IIO_CHAN_INFO_PEAK, + IIO_CHAN_INFO_PEAK_SCALE, + IIO_CHAN_INFO_QUADRATURE_CORRECTION_RAW, + IIO_CHAN_INFO_AVERAGE_RAW, + IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY, + IIO_CHAN_INFO_SAMP_FREQ, + IIO_CHAN_INFO_FREQUENCY, + IIO_CHAN_INFO_PHASE, + IIO_CHAN_INFO_HARDWAREGAIN, + IIO_CHAN_INFO_HYSTERESIS, + IIO_CHAN_INFO_INT_TIME, + IIO_CHAN_INFO_ENABLE, + IIO_CHAN_INFO_CALIBHEIGHT, + IIO_CHAN_INFO_CALIBWEIGHT, + IIO_CHAN_INFO_DEBOUNCE_COUNT, + IIO_CHAN_INFO_DEBOUNCE_TIME, +}; + +enum iio_shared_by { + IIO_SEPARATE, + IIO_SHARED_BY_TYPE, + IIO_SHARED_BY_DIR, + IIO_SHARED_BY_ALL +}; + +enum iio_endian { + IIO_CPU, + IIO_BE, + IIO_LE, +}; + +struct iio_chan_spec; +struct iio_dev; + +/** + * struct iio_chan_spec_ext_info - Extended channel info attribute + * @name: Info attribute name + * @shared: Whether this attribute is shared between all channels. + * @read: Read callback for this info attribute, may be NULL. + * @write: Write callback for this info attribute, may be NULL. + * @private: Data private to the driver. + */ +struct iio_chan_spec_ext_info { + const char *name; + enum iio_shared_by shared; + ssize_t (*read)(struct iio_dev *, uintptr_t private, + struct iio_chan_spec const *, char *buf); + ssize_t (*write)(struct iio_dev *, uintptr_t private, + struct iio_chan_spec const *, const char *buf, + size_t len); + uintptr_t private; +}; + +/** + * struct iio_enum - Enum channel info attribute + * @items: An array of strings. + * @num_items: Length of the item array. + * @set: Set callback function, may be NULL. + * @get: Get callback function, may be NULL. + * + * The iio_enum struct can be used to implement enum style channel attributes. + * Enum style attributes are those which have a set of strings which map to + * unsigned integer values. The IIO enum helper code takes care of mapping + * between value and string as well as generating a "_available" file which + * contains a list of all available items. The set callback will be called when + * the attribute is updated. The last parameter is the index to the newly + * activated item. The get callback will be used to query the currently active + * item and is supposed to return the index for it. + */ +struct iio_enum { + const char * const *items; + unsigned int num_items; + int (*set)(struct iio_dev *, const struct iio_chan_spec *, unsigned int); + int (*get)(struct iio_dev *, const struct iio_chan_spec *); +}; + +ssize_t iio_enum_available_read(struct iio_dev *indio_dev, + uintptr_t priv, const struct iio_chan_spec *chan, char *buf); +ssize_t iio_enum_read(struct iio_dev *indio_dev, + uintptr_t priv, const struct iio_chan_spec *chan, char *buf); +ssize_t iio_enum_write(struct iio_dev *indio_dev, + uintptr_t priv, const struct iio_chan_spec *chan, const char *buf, + size_t len); + +/** + * IIO_ENUM() - Initialize enum extended channel attribute + * @_name: Attribute name + * @_shared: Whether the attribute is shared between all channels + * @_e: Pointer to an iio_enum struct + * + * This should usually be used together with IIO_ENUM_AVAILABLE() + */ +#define IIO_ENUM(_name, _shared, _e) \ +{ \ + .name = (_name), \ + .shared = (_shared), \ + .read = iio_enum_read, \ + .write = iio_enum_write, \ + .private = (uintptr_t)(_e), \ +} + +/** + * IIO_ENUM_AVAILABLE() - Initialize enum available extended channel attribute + * @_name: Attribute name ("_available" will be appended to the name) + * @_e: Pointer to an iio_enum struct + * + * Creates a read only attribute which lists all the available enum items in a + * space separated list. This should usually be used together with IIO_ENUM() + */ +#define IIO_ENUM_AVAILABLE(_name, _e) \ +{ \ + .name = (_name "_available"), \ + .shared = IIO_SHARED_BY_TYPE, \ + .read = iio_enum_available_read, \ + .private = (uintptr_t)(_e), \ +} + +/** + * struct iio_event_spec - specification for a channel event + * @type: Type of the event + * @dir: Direction of the event + * @mask_separate: Bit mask of enum iio_event_info values. Attributes + * set in this mask will be registered per channel. + * @mask_shared_by_type: Bit mask of enum iio_event_info values. Attributes + * set in this mask will be shared by channel type. + * @mask_shared_by_dir: Bit mask of enum iio_event_info values. Attributes + * set in this mask will be shared by channel type and + * direction. + * @mask_shared_by_all: Bit mask of enum iio_event_info values. Attributes + * set in this mask will be shared by all channels. + */ +struct iio_event_spec { + enum iio_event_type type; + enum iio_event_direction dir; + unsigned long mask_separate; + unsigned long mask_shared_by_type; + unsigned long mask_shared_by_dir; + unsigned long mask_shared_by_all; +}; + +/** + * struct iio_chan_spec - specification of a single channel + * @type: What type of measurement is the channel making. + * @channel: What number do we wish to assign the channel. + * @channel2: If there is a second number for a differential + * channel then this is it. If modified is set then the + * value here specifies the modifier. + * @address: Driver specific identifier. + * @scan_index: Monotonic index to give ordering in scans when read + * from a buffer. + * @scan_type: Sign: 's' or 'u' to specify signed or unsigned + * realbits: Number of valid bits of data + * storage_bits: Realbits + padding + * shift: Shift right by this before masking out + * realbits. + * endianness: little or big endian + * repeat: Number of times real/storage bits + * repeats. When the repeat element is + * more than 1, then the type element in + * sysfs will show a repeat value. + * Otherwise, the number of repetitions is + * omitted. + * @info_mask_separate: What information is to be exported that is specific to + * this channel. + * @info_mask_shared_by_type: What information is to be exported that is shared + * by all channels of the same type. + * @info_mask_shared_by_dir: What information is to be exported that is shared + * by all channels of the same direction. + * @info_mask_shared_by_all: What information is to be exported that is shared + * by all channels. + * @event_spec: Array of events which should be registered for this + * channel. + * @num_event_specs: Size of the event_spec array. + * @ext_info: Array of extended info attributes for this channel. + * The array is NULL terminated, the last element should + * have its name field set to NULL. + * @extend_name: Allows labeling of channel attributes with an + * informative name. Note this has no effect codes etc, + * unlike modifiers. + * @datasheet_name: A name used in in-kernel mapping of channels. It should + * correspond to the first name that the channel is referred + * to by in the datasheet (e.g. IND), or the nearest + * possible compound name (e.g. IND-INC). + * @modified: Does a modifier apply to this channel. What these are + * depends on the channel type. Modifier is set in + * channel2. Examples are IIO_MOD_X for axial sensors about + * the 'x' axis. + * @indexed: Specify the channel has a numerical index. If not, + * the channel index number will be suppressed for sysfs + * attributes but not for event codes. + * @output: Channel is output. + * @differential: Channel is differential. + */ +struct iio_chan_spec { + enum iio_chan_type type; + int channel; + int channel2; + unsigned long address; + int scan_index; + struct { + char sign; + u8 realbits; + u8 storagebits; + u8 shift; + u8 repeat; + enum iio_endian endianness; + } scan_type; + long info_mask_separate; + long info_mask_shared_by_type; + long info_mask_shared_by_dir; + long info_mask_shared_by_all; + const struct iio_event_spec *event_spec; + unsigned int num_event_specs; + const struct iio_chan_spec_ext_info *ext_info; + const char *extend_name; + const char *datasheet_name; + unsigned modified:1; + unsigned indexed:1; + unsigned output:1; + unsigned differential:1; +}; + + +/** + * iio_channel_has_info() - Checks whether a channel supports a info attribute + * @chan: The channel to be queried + * @type: Type of the info attribute to be checked + * + * Returns true if the channels supports reporting values for the given info + * attribute type, false otherwise. + */ +static inline bool iio_channel_has_info(const struct iio_chan_spec *chan, + enum iio_chan_info_enum type) +{ + return (chan->info_mask_separate & BIT(type)) | + (chan->info_mask_shared_by_type & BIT(type)) | + (chan->info_mask_shared_by_dir & BIT(type)) | + (chan->info_mask_shared_by_all & BIT(type)); +} + +#define IIO_CHAN_SOFT_TIMESTAMP(_si) { \ + .type = IIO_TIMESTAMP, \ + .channel = -1, \ + .scan_index = _si, \ + .scan_type = { \ + .sign = 's', \ + .realbits = 64, \ + .storagebits = 64, \ + }, \ +} + +/** + * iio_get_time_ns() - utility function to get a time stamp for events etc + **/ +static inline s64 iio_get_time_ns(void) +{ + return ktime_get_real_ns(); +} + +/* Device operating modes */ +#define INDIO_DIRECT_MODE 0x01 +#define INDIO_BUFFER_TRIGGERED 0x02 +#define INDIO_BUFFER_SOFTWARE 0x04 +#define INDIO_BUFFER_HARDWARE 0x08 + +#define INDIO_ALL_BUFFER_MODES \ + (INDIO_BUFFER_TRIGGERED | INDIO_BUFFER_HARDWARE | INDIO_BUFFER_SOFTWARE) + +#define INDIO_MAX_RAW_ELEMENTS 4 + +struct iio_trigger; /* forward declaration */ +struct iio_dev; + +/** + * struct iio_info - constant information about device + * @driver_module: module structure used to ensure correct + * ownership of chrdevs etc + * @event_attrs: event control attributes + * @attrs: general purpose device attributes + * @read_raw: function to request a value from the device. + * mask specifies which value. Note 0 means a reading of + * the channel in question. Return value will specify the + * type of value returned by the device. val and val2 will + * contain the elements making up the returned value. + * @read_raw_multi: function to return values from the device. + * mask specifies which value. Note 0 means a reading of + * the channel in question. Return value will specify the + * type of value returned by the device. vals pointer + * contain the elements making up the returned value. + * max_len specifies maximum number of elements + * vals pointer can contain. val_len is used to return + * length of valid elements in vals. + * @write_raw: function to write a value to the device. + * Parameters are the same as for read_raw. + * @write_raw_get_fmt: callback function to query the expected + * format/precision. If not set by the driver, write_raw + * returns IIO_VAL_INT_PLUS_MICRO. + * @read_event_config: find out if the event is enabled. + * @write_event_config: set if the event is enabled. + * @read_event_value: read a configuration value associated with the event. + * @write_event_value: write a configuration value for the event. + * @validate_trigger: function to validate the trigger when the + * current trigger gets changed. + * @update_scan_mode: function to configure device and scan buffer when + * channels have changed + * @debugfs_reg_access: function to read or write register value of device + * @of_xlate: function pointer to obtain channel specifier index. + * When #iio-cells is greater than '0', the driver could + * provide a custom of_xlate function that reads the + * *args* and returns the appropriate index in registered + * IIO channels array. + * @hwfifo_set_watermark: function pointer to set the current hardware + * fifo watermark level; see hwfifo_* entries in + * Documentation/ABI/testing/sysfs-bus-iio for details on + * how the hardware fifo operates + * @hwfifo_flush_to_buffer: function pointer to flush the samples stored + * in the hardware fifo to the device buffer. The driver + * should not flush more than count samples. The function + * must return the number of samples flushed, 0 if no + * samples were flushed or a negative integer if no samples + * were flushed and there was an error. + **/ +struct iio_info { + struct module *driver_module; + struct attribute_group *event_attrs; + const struct attribute_group *attrs; + + int (*read_raw)(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + int *val, + int *val2, + long mask); + + int (*read_raw_multi)(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + int max_len, + int *vals, + int *val_len, + long mask); + + int (*write_raw)(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + int val, + int val2, + long mask); + + int (*write_raw_get_fmt)(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + long mask); + + int (*read_event_config)(struct iio_dev *indio_dev, + const struct iio_chan_spec *chan, + enum iio_event_type type, + enum iio_event_direction dir); + + int (*write_event_config)(struct iio_dev *indio_dev, + const struct iio_chan_spec *chan, + enum iio_event_type type, + enum iio_event_direction dir, + int state); + + int (*read_event_value)(struct iio_dev *indio_dev, + const struct iio_chan_spec *chan, + enum iio_event_type type, + enum iio_event_direction dir, + enum iio_event_info info, int *val, int *val2); + + int (*write_event_value)(struct iio_dev *indio_dev, + const struct iio_chan_spec *chan, + enum iio_event_type type, + enum iio_event_direction dir, + enum iio_event_info info, int val, int val2); + + int (*validate_trigger)(struct iio_dev *indio_dev, + struct iio_trigger *trig); + int (*update_scan_mode)(struct iio_dev *indio_dev, + const unsigned long *scan_mask); + int (*debugfs_reg_access)(struct iio_dev *indio_dev, + unsigned reg, unsigned writeval, + unsigned *readval); + int (*of_xlate)(struct iio_dev *indio_dev, + const struct of_phandle_args *iiospec); + int (*hwfifo_set_watermark)(struct iio_dev *indio_dev, unsigned val); + int (*hwfifo_flush_to_buffer)(struct iio_dev *indio_dev, + unsigned count); +}; + +/** + * struct iio_buffer_setup_ops - buffer setup related callbacks + * @preenable: [DRIVER] function to run prior to marking buffer enabled + * @postenable: [DRIVER] function to run after marking buffer enabled + * @predisable: [DRIVER] function to run prior to marking buffer + * disabled + * @postdisable: [DRIVER] function to run after marking buffer disabled + * @validate_scan_mask: [DRIVER] function callback to check whether a given + * scan mask is valid for the device. + */ +struct iio_buffer_setup_ops { + int (*preenable)(struct iio_dev *); + int (*postenable)(struct iio_dev *); + int (*predisable)(struct iio_dev *); + int (*postdisable)(struct iio_dev *); + bool (*validate_scan_mask)(struct iio_dev *indio_dev, + const unsigned long *scan_mask); +}; + +/** + * struct iio_dev - industrial I/O device + * @id: [INTERN] used to identify device internally + * @modes: [DRIVER] operating modes supported by device + * @currentmode: [DRIVER] current operating mode + * @dev: [DRIVER] device structure, should be assigned a parent + * and owner + * @event_interface: [INTERN] event chrdevs associated with interrupt lines + * @buffer: [DRIVER] any buffer present + * @buffer_list: [INTERN] list of all buffers currently attached + * @scan_bytes: [INTERN] num bytes captured to be fed to buffer demux + * @mlock: [INTERN] lock used to prevent simultaneous device state + * changes + * @available_scan_masks: [DRIVER] optional array of allowed bitmasks + * @masklength: [INTERN] the length of the mask established from + * channels + * @active_scan_mask: [INTERN] union of all scan masks requested by buffers + * @scan_timestamp: [INTERN] set if any buffers have requested timestamp + * @scan_index_timestamp:[INTERN] cache of the index to the timestamp + * @trig: [INTERN] current device trigger (buffer modes) + * @pollfunc: [DRIVER] function run on trigger being received + * @channels: [DRIVER] channel specification structure table + * @num_channels: [DRIVER] number of channels specified in @channels. + * @channel_attr_list: [INTERN] keep track of automatically created channel + * attributes + * @chan_attr_group: [INTERN] group for all attrs in base directory + * @name: [DRIVER] name of the device. + * @info: [DRIVER] callbacks and constant info from driver + * @info_exist_lock: [INTERN] lock to prevent use during removal + * @setup_ops: [DRIVER] callbacks to call before and after buffer + * enable/disable + * @chrdev: [INTERN] associated character device + * @groups: [INTERN] attribute groups + * @groupcounter: [INTERN] index of next attribute group + * @flags: [INTERN] file ops related flags including busy flag. + * @debugfs_dentry: [INTERN] device specific debugfs dentry. + * @cached_reg_addr: [INTERN] cached register address for debugfs reads. + */ +struct iio_dev { + int id; + + int modes; + int currentmode; + struct device dev; + + struct iio_event_interface *event_interface; + + struct iio_buffer *buffer; + struct list_head buffer_list; + int scan_bytes; + struct mutex mlock; + + const unsigned long *available_scan_masks; + unsigned masklength; + const unsigned long *active_scan_mask; + bool scan_timestamp; + unsigned scan_index_timestamp; + struct iio_trigger *trig; + struct iio_poll_func *pollfunc; + + struct iio_chan_spec const *channels; + int num_channels; + + struct list_head channel_attr_list; + struct attribute_group chan_attr_group; + const char *name; + const struct iio_info *info; + struct mutex info_exist_lock; + const struct iio_buffer_setup_ops *setup_ops; + struct cdev chrdev; +#define IIO_MAX_GROUPS 6 + const struct attribute_group *groups[IIO_MAX_GROUPS + 1]; + int groupcounter; + + unsigned long flags; +#if defined(CONFIG_DEBUG_FS) + struct dentry *debugfs_dentry; + unsigned cached_reg_addr; +#endif +}; + +const struct iio_chan_spec +*iio_find_channel_from_si(struct iio_dev *indio_dev, int si); +int iio_device_register(struct iio_dev *indio_dev); +void iio_device_unregister(struct iio_dev *indio_dev); +int devm_iio_device_register(struct device *dev, struct iio_dev *indio_dev); +void devm_iio_device_unregister(struct device *dev, struct iio_dev *indio_dev); +int iio_push_event(struct iio_dev *indio_dev, u64 ev_code, s64 timestamp); + +extern struct bus_type iio_bus_type; + +/** + * iio_device_put() - reference counted deallocation of struct device + * @indio_dev: IIO device structure containing the device + **/ +static inline void iio_device_put(struct iio_dev *indio_dev) +{ + if (indio_dev) + put_device(&indio_dev->dev); +} + +/** + * dev_to_iio_dev() - Get IIO device struct from a device struct + * @dev: The device embedded in the IIO device + * + * Note: The device must be a IIO device, otherwise the result is undefined. + */ +static inline struct iio_dev *dev_to_iio_dev(struct device *dev) +{ + return container_of(dev, struct iio_dev, dev); +} + +/** + * iio_device_get() - increment reference count for the device + * @indio_dev: IIO device structure + * + * Returns: The passed IIO device + **/ +static inline struct iio_dev *iio_device_get(struct iio_dev *indio_dev) +{ + return indio_dev ? dev_to_iio_dev(get_device(&indio_dev->dev)) : NULL; +} + + +/** + * iio_device_set_drvdata() - Set device driver data + * @indio_dev: IIO device structure + * @data: Driver specific data + * + * Allows to attach an arbitrary pointer to an IIO device, which can later be + * retrieved by iio_device_get_drvdata(). + */ +static inline void iio_device_set_drvdata(struct iio_dev *indio_dev, void *data) +{ + dev_set_drvdata(&indio_dev->dev, data); +} + +/** + * iio_device_get_drvdata() - Get device driver data + * @indio_dev: IIO device structure + * + * Returns the data previously set with iio_device_set_drvdata() + */ +static inline void *iio_device_get_drvdata(struct iio_dev *indio_dev) +{ + return dev_get_drvdata(&indio_dev->dev); +} + +/* Can we make this smaller? */ +#define IIO_ALIGN L1_CACHE_BYTES +struct iio_dev *iio_device_alloc(int sizeof_priv); + +static inline void *iio_priv(const struct iio_dev *indio_dev) +{ + return (char *)indio_dev + ALIGN(sizeof(struct iio_dev), IIO_ALIGN); +} + +static inline struct iio_dev *iio_priv_to_dev(void *priv) +{ + return (struct iio_dev *)((char *)priv - + ALIGN(sizeof(struct iio_dev), IIO_ALIGN)); +} + +void iio_device_free(struct iio_dev *indio_dev); +struct iio_dev *devm_iio_device_alloc(struct device *dev, int sizeof_priv); +void devm_iio_device_free(struct device *dev, struct iio_dev *indio_dev); +struct iio_trigger *devm_iio_trigger_alloc(struct device *dev, + const char *fmt, ...); +void devm_iio_trigger_free(struct device *dev, struct iio_trigger *iio_trig); + +/** + * iio_buffer_enabled() - helper function to test if the buffer is enabled + * @indio_dev: IIO device structure for device + **/ +static inline bool iio_buffer_enabled(struct iio_dev *indio_dev) +{ + return indio_dev->currentmode + & (INDIO_BUFFER_TRIGGERED | INDIO_BUFFER_HARDWARE | + INDIO_BUFFER_SOFTWARE); +} + +/** + * iio_get_debugfs_dentry() - helper function to get the debugfs_dentry + * @indio_dev: IIO device structure for device + **/ +#if defined(CONFIG_DEBUG_FS) +static inline struct dentry *iio_get_debugfs_dentry(struct iio_dev *indio_dev) +{ + return indio_dev->debugfs_dentry; +} +#else +static inline struct dentry *iio_get_debugfs_dentry(struct iio_dev *indio_dev) +{ + return NULL; +} +#endif + +int iio_str_to_fixpoint(const char *str, int fract_mult, int *integer, + int *fract); + +/** + * IIO_DEGREE_TO_RAD() - Convert degree to rad + * @deg: A value in degree + * + * Returns the given value converted from degree to rad + */ +#define IIO_DEGREE_TO_RAD(deg) (((deg) * 314159ULL + 9000000ULL) / 18000000ULL) + +/** + * IIO_G_TO_M_S_2() - Convert g to meter / second**2 + * @g: A value in g + * + * Returns the given value converted from g to meter / second**2 + */ +#define IIO_G_TO_M_S_2(g) ((g) * 980665ULL / 100000ULL) + +#endif /* _INDUSTRIAL_IO_H_ */ diff --git a/include/linux/iio/imu/adis.h b/include/linux/iio/imu/adis.h new file mode 100644 index 000000000..fa2d01ef8 --- /dev/null +++ b/include/linux/iio/imu/adis.h @@ -0,0 +1,283 @@ +/* + * Common library for ADIS16XXX devices + * + * Copyright 2012 Analog Devices Inc. + * Author: Lars-Peter Clausen <lars@metafoo.de> + * + * Licensed under the GPL-2 or later. + */ + +#ifndef __IIO_ADIS_H__ +#define __IIO_ADIS_H__ + +#include <linux/spi/spi.h> +#include <linux/interrupt.h> +#include <linux/iio/types.h> + +#define ADIS_WRITE_REG(reg) ((0x80 | (reg))) +#define ADIS_READ_REG(reg) ((reg) & 0x7f) + +#define ADIS_PAGE_SIZE 0x80 +#define ADIS_REG_PAGE_ID 0x00 + +struct adis; + +/** + * struct adis_data - ADIS chip variant specific data + * @read_delay: SPI delay for read operations in us + * @write_delay: SPI delay for write operations in us + * @glob_cmd_reg: Register address of the GLOB_CMD register + * @msc_ctrl_reg: Register address of the MSC_CTRL register + * @diag_stat_reg: Register address of the DIAG_STAT register + * @status_error_msgs: Array of error messgaes + * @status_error_mask: + */ +struct adis_data { + unsigned int read_delay; + unsigned int write_delay; + + unsigned int glob_cmd_reg; + unsigned int msc_ctrl_reg; + unsigned int diag_stat_reg; + + unsigned int self_test_mask; + unsigned int startup_delay; + + const char * const *status_error_msgs; + unsigned int status_error_mask; + + int (*enable_irq)(struct adis *adis, bool enable); + + bool has_paging; +}; + +struct adis { + struct spi_device *spi; + struct iio_trigger *trig; + + const struct adis_data *data; + + struct mutex txrx_lock; + struct spi_message msg; + struct spi_transfer *xfer; + unsigned int current_page; + void *buffer; + + uint8_t tx[10] ____cacheline_aligned; + uint8_t rx[4]; +}; + +int adis_init(struct adis *adis, struct iio_dev *indio_dev, + struct spi_device *spi, const struct adis_data *data); +int adis_reset(struct adis *adis); + +int adis_write_reg(struct adis *adis, unsigned int reg, + unsigned int val, unsigned int size); +int adis_read_reg(struct adis *adis, unsigned int reg, + unsigned int *val, unsigned int size); + +/** + * adis_write_reg_8() - Write single byte to a register + * @adis: The adis device + * @reg: The address of the register to be written + * @value: The value to write + */ +static inline int adis_write_reg_8(struct adis *adis, unsigned int reg, + uint8_t val) +{ + return adis_write_reg(adis, reg, val, 1); +} + +/** + * adis_write_reg_16() - Write 2 bytes to a pair of registers + * @adis: The adis device + * @reg: The address of the lower of the two registers + * @value: Value to be written + */ +static inline int adis_write_reg_16(struct adis *adis, unsigned int reg, + uint16_t val) +{ + return adis_write_reg(adis, reg, val, 2); +} + +/** + * adis_write_reg_32() - write 4 bytes to four registers + * @adis: The adis device + * @reg: The address of the lower of the four register + * @value: Value to be written + */ +static inline int adis_write_reg_32(struct adis *adis, unsigned int reg, + uint32_t val) +{ + return adis_write_reg(adis, reg, val, 4); +} + +/** + * adis_read_reg_16() - read 2 bytes from a 16-bit register + * @adis: The adis device + * @reg: The address of the lower of the two registers + * @val: The value read back from the device + */ +static inline int adis_read_reg_16(struct adis *adis, unsigned int reg, + uint16_t *val) +{ + unsigned int tmp; + int ret; + + ret = adis_read_reg(adis, reg, &tmp, 2); + *val = tmp; + + return ret; +} + +/** + * adis_read_reg_32() - read 4 bytes from a 32-bit register + * @adis: The adis device + * @reg: The address of the lower of the two registers + * @val: The value read back from the device + */ +static inline int adis_read_reg_32(struct adis *adis, unsigned int reg, + uint32_t *val) +{ + unsigned int tmp; + int ret; + + ret = adis_read_reg(adis, reg, &tmp, 4); + *val = tmp; + + return ret; +} + +int adis_enable_irq(struct adis *adis, bool enable); +int adis_check_status(struct adis *adis); + +int adis_initial_startup(struct adis *adis); + +int adis_single_conversion(struct iio_dev *indio_dev, + const struct iio_chan_spec *chan, unsigned int error_mask, + int *val); + +#define ADIS_VOLTAGE_CHAN(addr, si, chan, name, info_all, bits) { \ + .type = IIO_VOLTAGE, \ + .indexed = 1, \ + .channel = (chan), \ + .extend_name = name, \ + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | \ + BIT(IIO_CHAN_INFO_SCALE), \ + .info_mask_shared_by_all = info_all, \ + .address = (addr), \ + .scan_index = (si), \ + .scan_type = { \ + .sign = 'u', \ + .realbits = (bits), \ + .storagebits = 16, \ + .endianness = IIO_BE, \ + }, \ +} + +#define ADIS_SUPPLY_CHAN(addr, si, info_all, bits) \ + ADIS_VOLTAGE_CHAN(addr, si, 0, "supply", info_all, bits) + +#define ADIS_AUX_ADC_CHAN(addr, si, info_all, bits) \ + ADIS_VOLTAGE_CHAN(addr, si, 1, NULL, info_all, bits) + +#define ADIS_TEMP_CHAN(addr, si, info_all, bits) { \ + .type = IIO_TEMP, \ + .indexed = 1, \ + .channel = 0, \ + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | \ + BIT(IIO_CHAN_INFO_SCALE) | \ + BIT(IIO_CHAN_INFO_OFFSET), \ + .info_mask_shared_by_all = info_all, \ + .address = (addr), \ + .scan_index = (si), \ + .scan_type = { \ + .sign = 'u', \ + .realbits = (bits), \ + .storagebits = 16, \ + .endianness = IIO_BE, \ + }, \ +} + +#define ADIS_MOD_CHAN(_type, mod, addr, si, info_sep, info_all, bits) { \ + .type = (_type), \ + .modified = 1, \ + .channel2 = IIO_MOD_ ## mod, \ + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | \ + info_sep, \ + .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), \ + .info_mask_shared_by_all = info_all, \ + .address = (addr), \ + .scan_index = (si), \ + .scan_type = { \ + .sign = 's', \ + .realbits = (bits), \ + .storagebits = 16, \ + .endianness = IIO_BE, \ + }, \ +} + +#define ADIS_ACCEL_CHAN(mod, addr, si, info_sep, info_all, bits) \ + ADIS_MOD_CHAN(IIO_ACCEL, mod, addr, si, info_sep, info_all, bits) + +#define ADIS_GYRO_CHAN(mod, addr, si, info_sep, info_all, bits) \ + ADIS_MOD_CHAN(IIO_ANGL_VEL, mod, addr, si, info_sep, info_all, bits) + +#define ADIS_INCLI_CHAN(mod, addr, si, info_sep, info_all, bits) \ + ADIS_MOD_CHAN(IIO_INCLI, mod, addr, si, info_sep, info_all, bits) + +#define ADIS_ROT_CHAN(mod, addr, si, info_sep, info_all, bits) \ + ADIS_MOD_CHAN(IIO_ROT, mod, addr, si, info_sep, info_all, bits) + +#ifdef CONFIG_IIO_ADIS_LIB_BUFFER + +int adis_setup_buffer_and_trigger(struct adis *adis, + struct iio_dev *indio_dev, irqreturn_t (*trigger_handler)(int, void *)); +void adis_cleanup_buffer_and_trigger(struct adis *adis, + struct iio_dev *indio_dev); + +int adis_probe_trigger(struct adis *adis, struct iio_dev *indio_dev); +void adis_remove_trigger(struct adis *adis); + +int adis_update_scan_mode(struct iio_dev *indio_dev, + const unsigned long *scan_mask); + +#else /* CONFIG_IIO_BUFFER */ + +static inline int adis_setup_buffer_and_trigger(struct adis *adis, + struct iio_dev *indio_dev, irqreturn_t (*trigger_handler)(int, void *)) +{ + return 0; +} + +static inline void adis_cleanup_buffer_and_trigger(struct adis *adis, + struct iio_dev *indio_dev) +{ +} + +static inline int adis_probe_trigger(struct adis *adis, + struct iio_dev *indio_dev) +{ + return 0; +} + +static inline void adis_remove_trigger(struct adis *adis) +{ +} + +#define adis_update_scan_mode NULL + +#endif /* CONFIG_IIO_BUFFER */ + +#ifdef CONFIG_DEBUG_FS + +int adis_debugfs_reg_access(struct iio_dev *indio_dev, + unsigned int reg, unsigned int writeval, unsigned int *readval); + +#else + +#define adis_debugfs_reg_access NULL + +#endif + +#endif diff --git a/include/linux/iio/kfifo_buf.h b/include/linux/iio/kfifo_buf.h new file mode 100644 index 000000000..1683bc710 --- /dev/null +++ b/include/linux/iio/kfifo_buf.h @@ -0,0 +1,14 @@ +#ifndef __LINUX_IIO_KFIFO_BUF_H__ +#define __LINUX_IIO_KFIFO_BUF_H__ + +#include <linux/kfifo.h> +#include <linux/iio/iio.h> +#include <linux/iio/buffer.h> + +struct iio_buffer *iio_kfifo_allocate(void); +void iio_kfifo_free(struct iio_buffer *r); + +struct iio_buffer *devm_iio_kfifo_allocate(struct device *dev); +void devm_iio_kfifo_free(struct device *dev, struct iio_buffer *r); + +#endif diff --git a/include/linux/iio/machine.h b/include/linux/iio/machine.h new file mode 100644 index 000000000..1601a2a63 --- /dev/null +++ b/include/linux/iio/machine.h @@ -0,0 +1,31 @@ +/* + * Industrial I/O in kernel access map definitions for board files. + * + * Copyright (c) 2011 Jonathan Cameron + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation. + */ + +#ifndef __LINUX_IIO_MACHINE_H__ +#define __LINUX_IIO_MACHINE_H__ + +/** + * struct iio_map - description of link between consumer and device channels + * @adc_channel_label: Label used to identify the channel on the provider. + * This is matched against the datasheet_name element + * of struct iio_chan_spec. + * @consumer_dev_name: Name to uniquely identify the consumer device. + * @consumer_channel: Unique name used to identify the channel on the + * consumer side. + * @consumer_data: Data about the channel for use by the consumer driver. + */ +struct iio_map { + const char *adc_channel_label; + const char *consumer_dev_name; + const char *consumer_channel; + void *consumer_data; +}; + +#endif diff --git a/include/linux/iio/sysfs.h b/include/linux/iio/sysfs.h new file mode 100644 index 000000000..8a1d18640 --- /dev/null +++ b/include/linux/iio/sysfs.h @@ -0,0 +1,127 @@ +/* The industrial I/O core + * + *Copyright (c) 2008 Jonathan Cameron + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation. + * + * General attributes + */ + +#ifndef _INDUSTRIAL_IO_SYSFS_H_ +#define _INDUSTRIAL_IO_SYSFS_H_ + +struct iio_chan_spec; + +/** + * struct iio_dev_attr - iio specific device attribute + * @dev_attr: underlying device attribute + * @address: associated register address + * @l: list head for maintaining list of dynamically created attrs. + */ +struct iio_dev_attr { + struct device_attribute dev_attr; + u64 address; + struct list_head l; + struct iio_chan_spec const *c; +}; + +#define to_iio_dev_attr(_dev_attr) \ + container_of(_dev_attr, struct iio_dev_attr, dev_attr) + +ssize_t iio_read_const_attr(struct device *dev, + struct device_attribute *attr, + char *len); + +/** + * struct iio_const_attr - constant device specific attribute + * often used for things like available modes + * @string: attribute string + * @dev_attr: underlying device attribute + */ +struct iio_const_attr { + const char *string; + struct device_attribute dev_attr; +}; + +#define to_iio_const_attr(_dev_attr) \ + container_of(_dev_attr, struct iio_const_attr, dev_attr) + +/* Some attributes will be hard coded (device dependent) and not require an + address, in these cases pass a negative */ +#define IIO_ATTR(_name, _mode, _show, _store, _addr) \ + { .dev_attr = __ATTR(_name, _mode, _show, _store), \ + .address = _addr } + +#define IIO_DEVICE_ATTR(_name, _mode, _show, _store, _addr) \ + struct iio_dev_attr iio_dev_attr_##_name \ + = IIO_ATTR(_name, _mode, _show, _store, _addr) + +#define IIO_DEVICE_ATTR_NAMED(_vname, _name, _mode, _show, _store, _addr) \ + struct iio_dev_attr iio_dev_attr_##_vname \ + = IIO_ATTR(_name, _mode, _show, _store, _addr) + +#define IIO_CONST_ATTR(_name, _string) \ + struct iio_const_attr iio_const_attr_##_name \ + = { .string = _string, \ + .dev_attr = __ATTR(_name, S_IRUGO, iio_read_const_attr, NULL)} + +#define IIO_CONST_ATTR_NAMED(_vname, _name, _string) \ + struct iio_const_attr iio_const_attr_##_vname \ + = { .string = _string, \ + .dev_attr = __ATTR(_name, S_IRUGO, iio_read_const_attr, NULL)} + +/* Generic attributes of onetype or another */ + +/** + * IIO_DEV_ATTR_SAMP_FREQ - sets any internal clock frequency + * @_mode: sysfs file mode/permissions + * @_show: output method for the attribute + * @_store: input method for the attribute + **/ +#define IIO_DEV_ATTR_SAMP_FREQ(_mode, _show, _store) \ + IIO_DEVICE_ATTR(sampling_frequency, _mode, _show, _store, 0) + +/** + * IIO_DEV_ATTR_SAMP_FREQ_AVAIL - list available sampling frequencies + * @_show: output method for the attribute + * + * May be mode dependent on some devices + **/ +#define IIO_DEV_ATTR_SAMP_FREQ_AVAIL(_show) \ + IIO_DEVICE_ATTR(sampling_frequency_available, S_IRUGO, _show, NULL, 0) +/** + * IIO_CONST_ATTR_SAMP_FREQ_AVAIL - list available sampling frequencies + * @_string: frequency string for the attribute + * + * Constant version + **/ +#define IIO_CONST_ATTR_SAMP_FREQ_AVAIL(_string) \ + IIO_CONST_ATTR(sampling_frequency_available, _string) + +/** + * IIO_DEV_ATTR_INT_TIME_AVAIL - list available integration times + * @_show: output method for the attribute + **/ +#define IIO_DEV_ATTR_INT_TIME_AVAIL(_show) \ + IIO_DEVICE_ATTR(integration_time_available, S_IRUGO, _show, NULL, 0) +/** + * IIO_CONST_ATTR_INT_TIME_AVAIL - list available integration times + * @_string: frequency string for the attribute + * + * Constant version + **/ +#define IIO_CONST_ATTR_INT_TIME_AVAIL(_string) \ + IIO_CONST_ATTR(integration_time_available, _string) + +#define IIO_DEV_ATTR_TEMP_RAW(_show) \ + IIO_DEVICE_ATTR(in_temp_raw, S_IRUGO, _show, NULL, 0) + +#define IIO_CONST_ATTR_TEMP_OFFSET(_string) \ + IIO_CONST_ATTR(in_temp_offset, _string) + +#define IIO_CONST_ATTR_TEMP_SCALE(_string) \ + IIO_CONST_ATTR(in_temp_scale, _string) + +#endif /* _INDUSTRIAL_IO_SYSFS_H_ */ diff --git a/include/linux/iio/trigger.h b/include/linux/iio/trigger.h new file mode 100644 index 000000000..fa76c79a5 --- /dev/null +++ b/include/linux/iio/trigger.h @@ -0,0 +1,149 @@ +/* The industrial I/O core, trigger handling functions + * + * Copyright (c) 2008 Jonathan Cameron + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation. + */ +#include <linux/irq.h> +#include <linux/module.h> +#include <linux/atomic.h> + +#ifndef _IIO_TRIGGER_H_ +#define _IIO_TRIGGER_H_ + +#ifdef CONFIG_IIO_TRIGGER +struct iio_subirq { + bool enabled; +}; + +/** + * struct iio_trigger_ops - operations structure for an iio_trigger. + * @owner: used to monitor usage count of the trigger. + * @set_trigger_state: switch on/off the trigger on demand + * @try_reenable: function to reenable the trigger when the + * use count is zero (may be NULL) + * @validate_device: function to validate the device when the + * current trigger gets changed. + * + * This is typically static const within a driver and shared by + * instances of a given device. + **/ +struct iio_trigger_ops { + struct module *owner; + int (*set_trigger_state)(struct iio_trigger *trig, bool state); + int (*try_reenable)(struct iio_trigger *trig); + int (*validate_device)(struct iio_trigger *trig, + struct iio_dev *indio_dev); +}; + + +/** + * struct iio_trigger - industrial I/O trigger device + * @ops: [DRIVER] operations structure + * @id: [INTERN] unique id number + * @name: [DRIVER] unique name + * @dev: [DRIVER] associated device (if relevant) + * @list: [INTERN] used in maintenance of global trigger list + * @alloc_list: [DRIVER] used for driver specific trigger list + * @use_count: use count for the trigger + * @subirq_chip: [INTERN] associate 'virtual' irq chip. + * @subirq_base: [INTERN] base number for irqs provided by trigger. + * @subirqs: [INTERN] information about the 'child' irqs. + * @pool: [INTERN] bitmap of irqs currently in use. + * @pool_lock: [INTERN] protection of the irq pool. + **/ +struct iio_trigger { + const struct iio_trigger_ops *ops; + int id; + const char *name; + struct device dev; + + struct list_head list; + struct list_head alloc_list; + atomic_t use_count; + + struct irq_chip subirq_chip; + int subirq_base; + + struct iio_subirq subirqs[CONFIG_IIO_CONSUMERS_PER_TRIGGER]; + unsigned long pool[BITS_TO_LONGS(CONFIG_IIO_CONSUMERS_PER_TRIGGER)]; + struct mutex pool_lock; +}; + + +static inline struct iio_trigger *to_iio_trigger(struct device *d) +{ + return container_of(d, struct iio_trigger, dev); +} + +static inline void iio_trigger_put(struct iio_trigger *trig) +{ + module_put(trig->ops->owner); + put_device(&trig->dev); +} + +static inline struct iio_trigger *iio_trigger_get(struct iio_trigger *trig) +{ + get_device(&trig->dev); + __module_get(trig->ops->owner); + + return trig; +} + +/** + * iio_device_set_drvdata() - Set trigger driver data + * @trig: IIO trigger structure + * @data: Driver specific data + * + * Allows to attach an arbitrary pointer to an IIO trigger, which can later be + * retrieved by iio_trigger_get_drvdata(). + */ +static inline void iio_trigger_set_drvdata(struct iio_trigger *trig, void *data) +{ + dev_set_drvdata(&trig->dev, data); +} + +/** + * iio_trigger_get_drvdata() - Get trigger driver data + * @trig: IIO trigger structure + * + * Returns the data previously set with iio_trigger_set_drvdata() + */ +static inline void *iio_trigger_get_drvdata(struct iio_trigger *trig) +{ + return dev_get_drvdata(&trig->dev); +} + +/** + * iio_trigger_register() - register a trigger with the IIO core + * @trig_info: trigger to be registered + **/ +int iio_trigger_register(struct iio_trigger *trig_info); + +/** + * iio_trigger_unregister() - unregister a trigger from the core + * @trig_info: trigger to be unregistered + **/ +void iio_trigger_unregister(struct iio_trigger *trig_info); + +/** + * iio_trigger_poll() - called on a trigger occurring + * @trig: trigger which occurred + * + * Typically called in relevant hardware interrupt handler. + **/ +void iio_trigger_poll(struct iio_trigger *trig); +void iio_trigger_poll_chained(struct iio_trigger *trig); + +irqreturn_t iio_trigger_generic_data_rdy_poll(int irq, void *private); + +__printf(1, 2) struct iio_trigger *iio_trigger_alloc(const char *fmt, ...); +void iio_trigger_free(struct iio_trigger *trig); + +#else +struct iio_trigger; +struct iio_trigger_ops; +#endif +#endif /* _IIO_TRIGGER_H_ */ diff --git a/include/linux/iio/trigger_consumer.h b/include/linux/iio/trigger_consumer.h new file mode 100644 index 000000000..c4f8c7409 --- /dev/null +++ b/include/linux/iio/trigger_consumer.h @@ -0,0 +1,63 @@ +/* The industrial I/O core, trigger consumer functions + * + * Copyright (c) 2008-2011 Jonathan Cameron + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation. + */ + +#ifndef __LINUX_IIO_TRIGGER_CONSUMER_H__ +#define __LINUX_IIO_TRIGGER_CONSUMER_H__ + +#include <linux/interrupt.h> +#include <linux/types.h> + +struct iio_dev; +struct iio_trigger; + +/** + * struct iio_poll_func - poll function pair + * + * @indio_dev: data specific to device (passed into poll func) + * @h: the function that is actually run on trigger + * @thread: threaded interrupt part + * @type: the type of interrupt (basically if oneshot) + * @name: name used to identify the trigger consumer. + * @irq: the corresponding irq as allocated from the + * trigger pool + * @timestamp: some devices need a timestamp grabbed as soon + * as possible after the trigger - hence handler + * passes it via here. + **/ +struct iio_poll_func { + struct iio_dev *indio_dev; + irqreturn_t (*h)(int irq, void *p); + irqreturn_t (*thread)(int irq, void *p); + int type; + char *name; + int irq; + s64 timestamp; +}; + + +struct iio_poll_func +*iio_alloc_pollfunc(irqreturn_t (*h)(int irq, void *p), + irqreturn_t (*thread)(int irq, void *p), + int type, + struct iio_dev *indio_dev, + const char *fmt, + ...); +void iio_dealloc_pollfunc(struct iio_poll_func *pf); +irqreturn_t iio_pollfunc_store_time(int irq, void *p); + +void iio_trigger_notify_done(struct iio_trigger *trig); + +/* + * Two functions for common case where all that happens is a pollfunc + * is attached and detached from a trigger + */ +int iio_triggered_buffer_postenable(struct iio_dev *indio_dev); +int iio_triggered_buffer_predisable(struct iio_dev *indio_dev); + +#endif diff --git a/include/linux/iio/triggered_buffer.h b/include/linux/iio/triggered_buffer.h new file mode 100644 index 000000000..c378ebec6 --- /dev/null +++ b/include/linux/iio/triggered_buffer.h @@ -0,0 +1,15 @@ +#ifndef _LINUX_IIO_TRIGGERED_BUFFER_H_ +#define _LINUX_IIO_TRIGGERED_BUFFER_H_ + +#include <linux/interrupt.h> + +struct iio_dev; +struct iio_buffer_setup_ops; + +int iio_triggered_buffer_setup(struct iio_dev *indio_dev, + irqreturn_t (*pollfunc_bh)(int irq, void *p), + irqreturn_t (*pollfunc_th)(int irq, void *p), + const struct iio_buffer_setup_ops *setup_ops); +void iio_triggered_buffer_cleanup(struct iio_dev *indio_dev); + +#endif diff --git a/include/linux/iio/types.h b/include/linux/iio/types.h new file mode 100644 index 000000000..942b6de68 --- /dev/null +++ b/include/linux/iio/types.h @@ -0,0 +1,30 @@ +/* industrial I/O data types needed both in and out of kernel + * + * Copyright (c) 2008 Jonathan Cameron + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation. + */ + +#ifndef _IIO_TYPES_H_ +#define _IIO_TYPES_H_ + +#include <uapi/linux/iio/types.h> + +enum iio_event_info { + IIO_EV_INFO_ENABLE, + IIO_EV_INFO_VALUE, + IIO_EV_INFO_HYSTERESIS, + IIO_EV_INFO_PERIOD, +}; + +#define IIO_VAL_INT 1 +#define IIO_VAL_INT_PLUS_MICRO 2 +#define IIO_VAL_INT_PLUS_NANO 3 +#define IIO_VAL_INT_PLUS_MICRO_DB 4 +#define IIO_VAL_INT_MULTIPLE 5 +#define IIO_VAL_FRACTIONAL 10 +#define IIO_VAL_FRACTIONAL_LOG2 11 + +#endif /* _IIO_TYPES_H_ */ |