diff options
Diffstat (limited to 'include/linux/leds.h')
-rw-r--r-- | include/linux/leds.h | 347 |
1 files changed, 347 insertions, 0 deletions
diff --git a/include/linux/leds.h b/include/linux/leds.h new file mode 100644 index 000000000..9a2b00009 --- /dev/null +++ b/include/linux/leds.h @@ -0,0 +1,347 @@ +/* + * Driver model for leds and led triggers + * + * Copyright (C) 2005 John Lenz <lenz@cs.wisc.edu> + * Copyright (C) 2005 Richard Purdie <rpurdie@openedhand.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ +#ifndef __LINUX_LEDS_H_INCLUDED +#define __LINUX_LEDS_H_INCLUDED + +#include <linux/list.h> +#include <linux/mutex.h> +#include <linux/rwsem.h> +#include <linux/spinlock.h> +#include <linux/timer.h> +#include <linux/workqueue.h> + +struct device; +/* + * LED Core + */ + +enum led_brightness { + LED_OFF = 0, + LED_HALF = 127, + LED_FULL = 255, +}; + +struct led_classdev { + const char *name; + enum led_brightness brightness; + enum led_brightness max_brightness; + int flags; + + /* Lower 16 bits reflect status */ +#define LED_SUSPENDED (1 << 0) + /* Upper 16 bits reflect control information */ +#define LED_CORE_SUSPENDRESUME (1 << 16) +#define LED_BLINK_ONESHOT (1 << 17) +#define LED_BLINK_ONESHOT_STOP (1 << 18) +#define LED_BLINK_INVERT (1 << 19) +#define LED_SYSFS_DISABLE (1 << 20) +#define SET_BRIGHTNESS_ASYNC (1 << 21) +#define SET_BRIGHTNESS_SYNC (1 << 22) +#define LED_DEV_CAP_FLASH (1 << 23) + + /* Set LED brightness level */ + /* Must not sleep, use a workqueue if needed */ + void (*brightness_set)(struct led_classdev *led_cdev, + enum led_brightness brightness); + /* + * Set LED brightness level immediately - it can block the caller for + * the time required for accessing a LED device register. + */ + int (*brightness_set_sync)(struct led_classdev *led_cdev, + enum led_brightness brightness); + /* Get LED brightness level */ + enum led_brightness (*brightness_get)(struct led_classdev *led_cdev); + + /* + * Activate hardware accelerated blink, delays are in milliseconds + * and if both are zero then a sensible default should be chosen. + * The call should adjust the timings in that case and if it can't + * match the values specified exactly. + * Deactivate blinking again when the brightness is set to a fixed + * value via the brightness_set() callback. + */ + int (*blink_set)(struct led_classdev *led_cdev, + unsigned long *delay_on, + unsigned long *delay_off); + + struct device *dev; + const struct attribute_group **groups; + + struct list_head node; /* LED Device list */ + const char *default_trigger; /* Trigger to use */ + + unsigned long blink_delay_on, blink_delay_off; + struct timer_list blink_timer; + int blink_brightness; + void (*flash_resume)(struct led_classdev *led_cdev); + + struct work_struct set_brightness_work; + int delayed_set_value; + +#ifdef CONFIG_LEDS_TRIGGERS + /* Protects the trigger data below */ + struct rw_semaphore trigger_lock; + + struct led_trigger *trigger; + struct list_head trig_list; + void *trigger_data; + /* true if activated - deactivate routine uses it to do cleanup */ + bool activated; +#endif + + /* Ensures consistent access to the LED Flash Class device */ + struct mutex led_access; +}; + +extern int led_classdev_register(struct device *parent, + struct led_classdev *led_cdev); +extern int devm_led_classdev_register(struct device *parent, + struct led_classdev *led_cdev); +extern void led_classdev_unregister(struct led_classdev *led_cdev); +extern void devm_led_classdev_unregister(struct device *parent, + struct led_classdev *led_cdev); +extern void led_classdev_suspend(struct led_classdev *led_cdev); +extern void led_classdev_resume(struct led_classdev *led_cdev); + +/** + * led_blink_set - set blinking with software fallback + * @led_cdev: the LED to start blinking + * @delay_on: the time it should be on (in ms) + * @delay_off: the time it should ble off (in ms) + * + * This function makes the LED blink, attempting to use the + * hardware acceleration if possible, but falling back to + * software blinking if there is no hardware blinking or if + * the LED refuses the passed values. + * + * Note that if software blinking is active, simply calling + * led_cdev->brightness_set() will not stop the blinking, + * use led_classdev_brightness_set() instead. + */ +extern void led_blink_set(struct led_classdev *led_cdev, + unsigned long *delay_on, + unsigned long *delay_off); +/** + * led_blink_set_oneshot - do a oneshot software blink + * @led_cdev: the LED to start blinking + * @delay_on: the time it should be on (in ms) + * @delay_off: the time it should ble off (in ms) + * @invert: blink off, then on, leaving the led on + * + * This function makes the LED blink one time for delay_on + + * delay_off time, ignoring the request if another one-shot + * blink is already in progress. + * + * If invert is set, led blinks for delay_off first, then for + * delay_on and leave the led on after the on-off cycle. + */ +extern void led_blink_set_oneshot(struct led_classdev *led_cdev, + unsigned long *delay_on, + unsigned long *delay_off, + int invert); +/** + * led_set_brightness - set LED brightness + * @led_cdev: the LED to set + * @brightness: the brightness to set it to + * + * Set an LED's brightness, and, if necessary, cancel the + * software blink timer that implements blinking when the + * hardware doesn't. + */ +extern void led_set_brightness(struct led_classdev *led_cdev, + enum led_brightness brightness); +/** + * led_update_brightness - update LED brightness + * @led_cdev: the LED to query + * + * Get an LED's current brightness and update led_cdev->brightness + * member with the obtained value. + * + * Returns: 0 on success or negative error value on failure + */ +extern int led_update_brightness(struct led_classdev *led_cdev); + +/** + * led_sysfs_disable - disable LED sysfs interface + * @led_cdev: the LED to set + * + * Disable the led_cdev's sysfs interface. + */ +extern void led_sysfs_disable(struct led_classdev *led_cdev); + +/** + * led_sysfs_enable - enable LED sysfs interface + * @led_cdev: the LED to set + * + * Enable the led_cdev's sysfs interface. + */ +extern void led_sysfs_enable(struct led_classdev *led_cdev); + +/** + * led_sysfs_is_disabled - check if LED sysfs interface is disabled + * @led_cdev: the LED to query + * + * Returns: true if the led_cdev's sysfs interface is disabled. + */ +static inline bool led_sysfs_is_disabled(struct led_classdev *led_cdev) +{ + return led_cdev->flags & LED_SYSFS_DISABLE; +} + +/* + * LED Triggers + */ +/* Registration functions for simple triggers */ +#define DEFINE_LED_TRIGGER(x) static struct led_trigger *x; +#define DEFINE_LED_TRIGGER_GLOBAL(x) struct led_trigger *x; + +#ifdef CONFIG_LEDS_TRIGGERS + +#define TRIG_NAME_MAX 50 + +struct led_trigger { + /* Trigger Properties */ + const char *name; + void (*activate)(struct led_classdev *led_cdev); + void (*deactivate)(struct led_classdev *led_cdev); + + /* LEDs under control by this trigger (for simple triggers) */ + rwlock_t leddev_list_lock; + struct list_head led_cdevs; + + /* Link to next registered trigger */ + struct list_head next_trig; +}; + +/* Registration functions for complex triggers */ +extern int led_trigger_register(struct led_trigger *trigger); +extern void led_trigger_unregister(struct led_trigger *trigger); + +extern void led_trigger_register_simple(const char *name, + struct led_trigger **trigger); +extern void led_trigger_unregister_simple(struct led_trigger *trigger); +extern void led_trigger_event(struct led_trigger *trigger, + enum led_brightness event); +extern void led_trigger_blink(struct led_trigger *trigger, + unsigned long *delay_on, + unsigned long *delay_off); +extern void led_trigger_blink_oneshot(struct led_trigger *trigger, + unsigned long *delay_on, + unsigned long *delay_off, + int invert); +/** + * led_trigger_rename_static - rename a trigger + * @name: the new trigger name + * @trig: the LED trigger to rename + * + * Change a LED trigger name by copying the string passed in + * name into current trigger name, which MUST be large + * enough for the new string. + * + * Note that name must NOT point to the same string used + * during LED registration, as that could lead to races. + * + * This is meant to be used on triggers with statically + * allocated name. + */ +extern void led_trigger_rename_static(const char *name, + struct led_trigger *trig); + +#else + +/* Trigger has no members */ +struct led_trigger {}; + +/* Trigger inline empty functions */ +static inline void led_trigger_register_simple(const char *name, + struct led_trigger **trigger) {} +static inline void led_trigger_unregister_simple(struct led_trigger *trigger) {} +static inline void led_trigger_event(struct led_trigger *trigger, + enum led_brightness event) {} +#endif /* CONFIG_LEDS_TRIGGERS */ + +/* Trigger specific functions */ +#ifdef CONFIG_LEDS_TRIGGER_IDE_DISK +extern void ledtrig_ide_activity(void); +#else +static inline void ledtrig_ide_activity(void) {} +#endif + +#if defined(CONFIG_LEDS_TRIGGER_CAMERA) || defined(CONFIG_LEDS_TRIGGER_CAMERA_MODULE) +extern void ledtrig_flash_ctrl(bool on); +extern void ledtrig_torch_ctrl(bool on); +#else +static inline void ledtrig_flash_ctrl(bool on) {} +static inline void ledtrig_torch_ctrl(bool on) {} +#endif + +/* + * Generic LED platform data for describing LED names and default triggers. + */ +struct led_info { + const char *name; + const char *default_trigger; + int flags; +}; + +struct led_platform_data { + int num_leds; + struct led_info *leds; +}; + +/* For the leds-gpio driver */ +struct gpio_led { + const char *name; + const char *default_trigger; + unsigned gpio; + unsigned active_low : 1; + unsigned retain_state_suspended : 1; + unsigned default_state : 2; + /* default_state should be one of LEDS_GPIO_DEFSTATE_(ON|OFF|KEEP) */ + struct gpio_desc *gpiod; +}; +#define LEDS_GPIO_DEFSTATE_OFF 0 +#define LEDS_GPIO_DEFSTATE_ON 1 +#define LEDS_GPIO_DEFSTATE_KEEP 2 + +struct gpio_led_platform_data { + int num_leds; + const struct gpio_led *leds; + +#define GPIO_LED_NO_BLINK_LOW 0 /* No blink GPIO state low */ +#define GPIO_LED_NO_BLINK_HIGH 1 /* No blink GPIO state high */ +#define GPIO_LED_BLINK 2 /* Please, blink */ + int (*gpio_blink_set)(struct gpio_desc *desc, int state, + unsigned long *delay_on, + unsigned long *delay_off); +}; + +struct platform_device *gpio_led_register_device( + int id, const struct gpio_led_platform_data *pdata); + +enum cpu_led_event { + CPU_LED_IDLE_START, /* CPU enters idle */ + CPU_LED_IDLE_END, /* CPU idle ends */ + CPU_LED_START, /* Machine starts, especially resume */ + CPU_LED_STOP, /* Machine stops, especially suspend */ + CPU_LED_HALTED, /* Machine shutdown */ +}; +#ifdef CONFIG_LEDS_TRIGGER_CPU +extern void ledtrig_cpu(enum cpu_led_event evt); +#else +static inline void ledtrig_cpu(enum cpu_led_event evt) +{ + return; +} +#endif + +#endif /* __LINUX_LEDS_H_INCLUDED */ |