diff options
Diffstat (limited to 'include/linux/mfd/cros_ec.h')
| -rw-r--r-- | include/linux/mfd/cros_ec.h | 86 |
1 files changed, 72 insertions, 14 deletions
diff --git a/include/linux/mfd/cros_ec.h b/include/linux/mfd/cros_ec.h index 324a34683..da72671a4 100644 --- a/include/linux/mfd/cros_ec.h +++ b/include/linux/mfd/cros_ec.h @@ -17,10 +17,29 @@ #define __LINUX_MFD_CROS_EC_H #include <linux/cdev.h> +#include <linux/device.h> #include <linux/notifier.h> #include <linux/mfd/cros_ec_commands.h> #include <linux/mutex.h> +#define CROS_EC_DEV_NAME "cros_ec" +#define CROS_EC_DEV_PD_NAME "cros_pd" + +/* + * The EC is unresponsive for a time after a reboot command. Add a + * simple delay to make sure that the bus stays locked. + */ +#define EC_REBOOT_DELAY_MS 50 + +/* + * Max bus-specific overhead incurred by request/responses. + * I2C requires 1 additional byte for requests. + * I2C requires 2 additional bytes for responses. + * */ +#define EC_PROTO_VERSION_UNKNOWN 0 +#define EC_MAX_REQUEST_OVERHEAD 1 +#define EC_MAX_RESPONSE_OVERHEAD 2 + /* * Command interface between EC and AP, for LPC, I2C and SPI interfaces. */ @@ -42,8 +61,7 @@ enum { * @outsize: Outgoing length in bytes * @insize: Max number of bytes to accept from EC * @result: EC's response to the command (separate from communication failure) - * @outdata: Outgoing data to EC - * @indata: Where to put the incoming data from EC + * @data: Where to put the incoming data from EC and outgoing data to EC */ struct cros_ec_command { uint32_t version; @@ -51,18 +69,14 @@ struct cros_ec_command { uint32_t outsize; uint32_t insize; uint32_t result; - uint8_t outdata[EC_PROTO2_MAX_PARAM_SIZE]; - uint8_t indata[EC_PROTO2_MAX_PARAM_SIZE]; + uint8_t data[0]; }; /** * struct cros_ec_device - Information about a ChromeOS EC device * - * @ec_name: name of EC device (e.g. 'chromeos-ec') * @phys_name: name of physical comms layer (e.g. 'i2c-4') * @dev: Device pointer for physical comms device - * @vdev: Device pointer for virtual comms device - * @cdev: Character device structure for virtual comms device * @was_wake_device: true if this device was set to wake the system from * sleep at the last suspend * @cmd_readmem: direct read of the EC memory-mapped region, if supported @@ -74,6 +88,7 @@ struct cros_ec_command { * * @priv: Private data * @irq: Interrupt to use + * @id: Device id * @din: input buffer (for data from EC) * @dout: output buffer (for data to EC) * \note @@ -85,41 +100,72 @@ struct cros_ec_command { * to using dword. * @din_size: size of din buffer to allocate (zero to use static din) * @dout_size: size of dout buffer to allocate (zero to use static dout) - * @parent: pointer to parent device (e.g. i2c or spi device) * @wake_enabled: true if this device can wake the system from sleep * @cmd_xfer: send command to EC and get response * Returns the number of bytes received if the communication succeeded, but * that doesn't mean the EC was happy with the command. The caller * should check msg.result for the EC's result code. + * @pkt_xfer: send packet to EC and get response * @lock: one transaction at a time */ struct cros_ec_device { /* These are used by other drivers that want to talk to the EC */ - const char *ec_name; const char *phys_name; struct device *dev; - struct device *vdev; - struct cdev cdev; bool was_wake_device; struct class *cros_class; int (*cmd_readmem)(struct cros_ec_device *ec, unsigned int offset, unsigned int bytes, void *dest); /* These are used to implement the platform-specific interface */ + u16 max_request; + u16 max_response; + u16 max_passthru; + u16 proto_version; void *priv; int irq; - uint8_t *din; - uint8_t *dout; + u8 *din; + u8 *dout; int din_size; int dout_size; - struct device *parent; bool wake_enabled; int (*cmd_xfer)(struct cros_ec_device *ec, struct cros_ec_command *msg); + int (*pkt_xfer)(struct cros_ec_device *ec, + struct cros_ec_command *msg); struct mutex lock; }; +/* struct cros_ec_platform - ChromeOS EC platform information + * + * @ec_name: name of EC device (e.g. 'cros-ec', 'cros-pd', ...) + * used in /dev/ and sysfs. + * @cmd_offset: offset to apply for each command. Set when + * registering a devicde behind another one. + */ +struct cros_ec_platform { + const char *ec_name; + u16 cmd_offset; +}; + +/* + * struct cros_ec_dev - ChromeOS EC device entry point + * + * @class_dev: Device structure used in sysfs + * @cdev: Character device structure in /dev + * @ec_dev: cros_ec_device structure to talk to the physical device + * @dev: pointer to the platform device + * @cmd_offset: offset to apply for each command. + */ +struct cros_ec_dev { + struct device class_dev; + struct cdev cdev; + struct cros_ec_device *ec_dev; + struct device *dev; + u16 cmd_offset; +}; + /** * cros_ec_suspend - Handle a suspend operation for the ChromeOS EC device * @@ -198,4 +244,16 @@ int cros_ec_remove(struct cros_ec_device *ec_dev); */ int cros_ec_register(struct cros_ec_device *ec_dev); +/** + * cros_ec_register - Query the protocol version supported by the ChromeOS EC + * + * @ec_dev: Device to register + * @return 0 if ok, -ve on error + */ +int cros_ec_query_all(struct cros_ec_device *ec_dev); + +/* sysfs stuff */ +extern struct attribute_group cros_ec_attr_group; +extern struct attribute_group cros_ec_lightbar_attr_group; + #endif /* __LINUX_MFD_CROS_EC_H */ |