summaryrefslogtreecommitdiff
path: root/include/linux/regulator
diff options
context:
space:
mode:
Diffstat (limited to 'include/linux/regulator')
-rw-r--r--include/linux/regulator/ab8500.h325
-rw-r--r--include/linux/regulator/act8865.h88
-rw-r--r--include/linux/regulator/consumer.h573
-rw-r--r--include/linux/regulator/da9211.h39
-rw-r--r--include/linux/regulator/db8500-prcmu.h45
-rw-r--r--include/linux/regulator/driver.h436
-rw-r--r--include/linux/regulator/fan53555.h61
-rw-r--r--include/linux/regulator/fixed.h76
-rw-r--r--include/linux/regulator/gpio-regulator.h87
-rw-r--r--include/linux/regulator/lp3971.h51
-rw-r--r--include/linux/regulator/lp3972.h48
-rw-r--r--include/linux/regulator/lp872x.h90
-rw-r--r--include/linux/regulator/machine.h212
-rw-r--r--include/linux/regulator/max1586.h63
-rw-r--r--include/linux/regulator/max8649.h44
-rw-r--r--include/linux/regulator/max8660.h57
-rw-r--r--include/linux/regulator/max8952.h135
-rw-r--r--include/linux/regulator/max8973-regulator.h72
-rw-r--r--include/linux/regulator/mt6397-regulator.h49
-rw-r--r--include/linux/regulator/of_regulator.h45
-rw-r--r--include/linux/regulator/pfuze100.h72
-rw-r--r--include/linux/regulator/tps51632-regulator.h47
-rw-r--r--include/linux/regulator/tps62360.h53
-rw-r--r--include/linux/regulator/tps6507x.h32
-rw-r--r--include/linux/regulator/userspace-consumer.h25
25 files changed, 2825 insertions, 0 deletions
diff --git a/include/linux/regulator/ab8500.h b/include/linux/regulator/ab8500.h
new file mode 100644
index 000000000..d8ecefaf6
--- /dev/null
+++ b/include/linux/regulator/ab8500.h
@@ -0,0 +1,325 @@
+/*
+ * Copyright (C) ST-Ericsson SA 2010
+ *
+ * License Terms: GNU General Public License v2
+ *
+ * Authors: Sundar Iyer <sundar.iyer@stericsson.com> for ST-Ericsson
+ * Bengt Jonsson <bengt.g.jonsson@stericsson.com> for ST-Ericsson
+ * Daniel Willerud <daniel.willerud@stericsson.com> for ST-Ericsson
+ */
+
+#ifndef __LINUX_MFD_AB8500_REGULATOR_H
+#define __LINUX_MFD_AB8500_REGULATOR_H
+
+#include <linux/platform_device.h>
+
+/* AB8500 regulators */
+enum ab8500_regulator_id {
+ AB8500_LDO_AUX1,
+ AB8500_LDO_AUX2,
+ AB8500_LDO_AUX3,
+ AB8500_LDO_INTCORE,
+ AB8500_LDO_TVOUT,
+ AB8500_LDO_AUDIO,
+ AB8500_LDO_ANAMIC1,
+ AB8500_LDO_ANAMIC2,
+ AB8500_LDO_DMIC,
+ AB8500_LDO_ANA,
+ AB8500_NUM_REGULATORS,
+};
+
+/* AB8505 regulators */
+enum ab8505_regulator_id {
+ AB8505_LDO_AUX1,
+ AB8505_LDO_AUX2,
+ AB8505_LDO_AUX3,
+ AB8505_LDO_AUX4,
+ AB8505_LDO_AUX5,
+ AB8505_LDO_AUX6,
+ AB8505_LDO_INTCORE,
+ AB8505_LDO_ADC,
+ AB8505_LDO_USB,
+ AB8505_LDO_AUDIO,
+ AB8505_LDO_ANAMIC1,
+ AB8505_LDO_ANAMIC2,
+ AB8505_LDO_AUX8,
+ AB8505_LDO_ANA,
+ AB8505_SYSCLKREQ_2,
+ AB8505_SYSCLKREQ_4,
+ AB8505_NUM_REGULATORS,
+};
+
+/* AB9540 regulators */
+enum ab9540_regulator_id {
+ AB9540_LDO_AUX1,
+ AB9540_LDO_AUX2,
+ AB9540_LDO_AUX3,
+ AB9540_LDO_AUX4,
+ AB9540_LDO_INTCORE,
+ AB9540_LDO_TVOUT,
+ AB9540_LDO_USB,
+ AB9540_LDO_AUDIO,
+ AB9540_LDO_ANAMIC1,
+ AB9540_LDO_ANAMIC2,
+ AB9540_LDO_DMIC,
+ AB9540_LDO_ANA,
+ AB9540_SYSCLKREQ_2,
+ AB9540_SYSCLKREQ_4,
+ AB9540_NUM_REGULATORS,
+};
+
+/* AB8540 regulators */
+enum ab8540_regulator_id {
+ AB8540_LDO_AUX1,
+ AB8540_LDO_AUX2,
+ AB8540_LDO_AUX3,
+ AB8540_LDO_AUX4,
+ AB8540_LDO_AUX5,
+ AB8540_LDO_AUX6,
+ AB8540_LDO_INTCORE,
+ AB8540_LDO_TVOUT,
+ AB8540_LDO_AUDIO,
+ AB8540_LDO_ANAMIC1,
+ AB8540_LDO_ANAMIC2,
+ AB8540_LDO_DMIC,
+ AB8540_LDO_ANA,
+ AB8540_LDO_SDIO,
+ AB8540_SYSCLKREQ_2,
+ AB8540_SYSCLKREQ_4,
+ AB8540_NUM_REGULATORS,
+};
+
+/* AB8500, AB8505, and AB9540 register initialization */
+struct ab8500_regulator_reg_init {
+ int id;
+ u8 mask;
+ u8 value;
+};
+
+#define INIT_REGULATOR_REGISTER(_id, _mask, _value) \
+ { \
+ .id = _id, \
+ .mask = _mask, \
+ .value = _value, \
+ }
+
+/* AB8500 registers */
+enum ab8500_regulator_reg {
+ AB8500_REGUREQUESTCTRL2,
+ AB8500_REGUREQUESTCTRL3,
+ AB8500_REGUREQUESTCTRL4,
+ AB8500_REGUSYSCLKREQ1HPVALID1,
+ AB8500_REGUSYSCLKREQ1HPVALID2,
+ AB8500_REGUHWHPREQ1VALID1,
+ AB8500_REGUHWHPREQ1VALID2,
+ AB8500_REGUHWHPREQ2VALID1,
+ AB8500_REGUHWHPREQ2VALID2,
+ AB8500_REGUSWHPREQVALID1,
+ AB8500_REGUSWHPREQVALID2,
+ AB8500_REGUSYSCLKREQVALID1,
+ AB8500_REGUSYSCLKREQVALID2,
+ AB8500_REGUMISC1,
+ AB8500_VAUDIOSUPPLY,
+ AB8500_REGUCTRL1VAMIC,
+ AB8500_VPLLVANAREGU,
+ AB8500_VREFDDR,
+ AB8500_EXTSUPPLYREGU,
+ AB8500_VAUX12REGU,
+ AB8500_VRF1VAUX3REGU,
+ AB8500_VAUX1SEL,
+ AB8500_VAUX2SEL,
+ AB8500_VRF1VAUX3SEL,
+ AB8500_REGUCTRL2SPARE,
+ AB8500_REGUCTRLDISCH,
+ AB8500_REGUCTRLDISCH2,
+ AB8500_NUM_REGULATOR_REGISTERS,
+};
+
+/* AB8505 registers */
+enum ab8505_regulator_reg {
+ AB8505_REGUREQUESTCTRL1,
+ AB8505_REGUREQUESTCTRL2,
+ AB8505_REGUREQUESTCTRL3,
+ AB8505_REGUREQUESTCTRL4,
+ AB8505_REGUSYSCLKREQ1HPVALID1,
+ AB8505_REGUSYSCLKREQ1HPVALID2,
+ AB8505_REGUHWHPREQ1VALID1,
+ AB8505_REGUHWHPREQ1VALID2,
+ AB8505_REGUHWHPREQ2VALID1,
+ AB8505_REGUHWHPREQ2VALID2,
+ AB8505_REGUSWHPREQVALID1,
+ AB8505_REGUSWHPREQVALID2,
+ AB8505_REGUSYSCLKREQVALID1,
+ AB8505_REGUSYSCLKREQVALID2,
+ AB8505_REGUVAUX4REQVALID,
+ AB8505_REGUMISC1,
+ AB8505_VAUDIOSUPPLY,
+ AB8505_REGUCTRL1VAMIC,
+ AB8505_VSMPSAREGU,
+ AB8505_VSMPSBREGU,
+ AB8505_VSAFEREGU, /* NOTE! PRCMU register */
+ AB8505_VPLLVANAREGU,
+ AB8505_EXTSUPPLYREGU,
+ AB8505_VAUX12REGU,
+ AB8505_VRF1VAUX3REGU,
+ AB8505_VSMPSASEL1,
+ AB8505_VSMPSASEL2,
+ AB8505_VSMPSASEL3,
+ AB8505_VSMPSBSEL1,
+ AB8505_VSMPSBSEL2,
+ AB8505_VSMPSBSEL3,
+ AB8505_VSAFESEL1, /* NOTE! PRCMU register */
+ AB8505_VSAFESEL2, /* NOTE! PRCMU register */
+ AB8505_VSAFESEL3, /* NOTE! PRCMU register */
+ AB8505_VAUX1SEL,
+ AB8505_VAUX2SEL,
+ AB8505_VRF1VAUX3SEL,
+ AB8505_VAUX4REQCTRL,
+ AB8505_VAUX4REGU,
+ AB8505_VAUX4SEL,
+ AB8505_REGUCTRLDISCH,
+ AB8505_REGUCTRLDISCH2,
+ AB8505_REGUCTRLDISCH3,
+ AB8505_CTRLVAUX5,
+ AB8505_CTRLVAUX6,
+ AB8505_NUM_REGULATOR_REGISTERS,
+};
+
+/* AB9540 registers */
+enum ab9540_regulator_reg {
+ AB9540_REGUREQUESTCTRL1,
+ AB9540_REGUREQUESTCTRL2,
+ AB9540_REGUREQUESTCTRL3,
+ AB9540_REGUREQUESTCTRL4,
+ AB9540_REGUSYSCLKREQ1HPVALID1,
+ AB9540_REGUSYSCLKREQ1HPVALID2,
+ AB9540_REGUHWHPREQ1VALID1,
+ AB9540_REGUHWHPREQ1VALID2,
+ AB9540_REGUHWHPREQ2VALID1,
+ AB9540_REGUHWHPREQ2VALID2,
+ AB9540_REGUSWHPREQVALID1,
+ AB9540_REGUSWHPREQVALID2,
+ AB9540_REGUSYSCLKREQVALID1,
+ AB9540_REGUSYSCLKREQVALID2,
+ AB9540_REGUVAUX4REQVALID,
+ AB9540_REGUMISC1,
+ AB9540_VAUDIOSUPPLY,
+ AB9540_REGUCTRL1VAMIC,
+ AB9540_VSMPS1REGU,
+ AB9540_VSMPS2REGU,
+ AB9540_VSMPS3REGU, /* NOTE! PRCMU register */
+ AB9540_VPLLVANAREGU,
+ AB9540_EXTSUPPLYREGU,
+ AB9540_VAUX12REGU,
+ AB9540_VRF1VAUX3REGU,
+ AB9540_VSMPS1SEL1,
+ AB9540_VSMPS1SEL2,
+ AB9540_VSMPS1SEL3,
+ AB9540_VSMPS2SEL1,
+ AB9540_VSMPS2SEL2,
+ AB9540_VSMPS2SEL3,
+ AB9540_VSMPS3SEL1, /* NOTE! PRCMU register */
+ AB9540_VSMPS3SEL2, /* NOTE! PRCMU register */
+ AB9540_VAUX1SEL,
+ AB9540_VAUX2SEL,
+ AB9540_VRF1VAUX3SEL,
+ AB9540_REGUCTRL2SPARE,
+ AB9540_VAUX4REQCTRL,
+ AB9540_VAUX4REGU,
+ AB9540_VAUX4SEL,
+ AB9540_REGUCTRLDISCH,
+ AB9540_REGUCTRLDISCH2,
+ AB9540_REGUCTRLDISCH3,
+ AB9540_NUM_REGULATOR_REGISTERS,
+};
+
+/* AB8540 registers */
+enum ab8540_regulator_reg {
+ AB8540_REGUREQUESTCTRL1,
+ AB8540_REGUREQUESTCTRL2,
+ AB8540_REGUREQUESTCTRL3,
+ AB8540_REGUREQUESTCTRL4,
+ AB8540_REGUSYSCLKREQ1HPVALID1,
+ AB8540_REGUSYSCLKREQ1HPVALID2,
+ AB8540_REGUHWHPREQ1VALID1,
+ AB8540_REGUHWHPREQ1VALID2,
+ AB8540_REGUHWHPREQ2VALID1,
+ AB8540_REGUHWHPREQ2VALID2,
+ AB8540_REGUSWHPREQVALID1,
+ AB8540_REGUSWHPREQVALID2,
+ AB8540_REGUSYSCLKREQVALID1,
+ AB8540_REGUSYSCLKREQVALID2,
+ AB8540_REGUVAUX4REQVALID,
+ AB8540_REGUVAUX5REQVALID,
+ AB8540_REGUVAUX6REQVALID,
+ AB8540_REGUVCLKBREQVALID,
+ AB8540_REGUVRF1REQVALID,
+ AB8540_REGUMISC1,
+ AB8540_VAUDIOSUPPLY,
+ AB8540_REGUCTRL1VAMIC,
+ AB8540_VHSIC,
+ AB8540_VSDIO,
+ AB8540_VSMPS1REGU,
+ AB8540_VSMPS2REGU,
+ AB8540_VSMPS3REGU,
+ AB8540_VPLLVANAREGU,
+ AB8540_EXTSUPPLYREGU,
+ AB8540_VAUX12REGU,
+ AB8540_VRF1VAUX3REGU,
+ AB8540_VSMPS1SEL1,
+ AB8540_VSMPS1SEL2,
+ AB8540_VSMPS1SEL3,
+ AB8540_VSMPS2SEL1,
+ AB8540_VSMPS2SEL2,
+ AB8540_VSMPS2SEL3,
+ AB8540_VSMPS3SEL1,
+ AB8540_VSMPS3SEL2,
+ AB8540_VAUX1SEL,
+ AB8540_VAUX2SEL,
+ AB8540_VRF1VAUX3SEL,
+ AB8540_REGUCTRL2SPARE,
+ AB8540_VAUX4REQCTRL,
+ AB8540_VAUX4REGU,
+ AB8540_VAUX4SEL,
+ AB8540_VAUX5REQCTRL,
+ AB8540_VAUX5REGU,
+ AB8540_VAUX5SEL,
+ AB8540_VAUX6REQCTRL,
+ AB8540_VAUX6REGU,
+ AB8540_VAUX6SEL,
+ AB8540_VCLKBREQCTRL,
+ AB8540_VCLKBREGU,
+ AB8540_VCLKBSEL,
+ AB8540_VRF1REQCTRL,
+ AB8540_REGUCTRLDISCH,
+ AB8540_REGUCTRLDISCH2,
+ AB8540_REGUCTRLDISCH3,
+ AB8540_REGUCTRLDISCH4,
+ AB8540_VSIMSYSCLKCTRL,
+ AB8540_VANAVPLLSEL,
+ AB8540_NUM_REGULATOR_REGISTERS,
+};
+
+/* AB8500 external regulators */
+struct ab8500_ext_regulator_cfg {
+ bool hwreq; /* requires hw mode or high power mode */
+};
+
+enum ab8500_ext_regulator_id {
+ AB8500_EXT_SUPPLY1,
+ AB8500_EXT_SUPPLY2,
+ AB8500_EXT_SUPPLY3,
+ AB8500_NUM_EXT_REGULATORS,
+};
+
+/* AB8500 regulator platform data */
+struct ab8500_regulator_platform_data {
+ int num_reg_init;
+ struct ab8500_regulator_reg_init *reg_init;
+ int num_regulator;
+ struct regulator_init_data *regulator;
+ int num_ext_regulator;
+ struct regulator_init_data *ext_regulator;
+};
+
+#endif
diff --git a/include/linux/regulator/act8865.h b/include/linux/regulator/act8865.h
new file mode 100644
index 000000000..15fa8f2d3
--- /dev/null
+++ b/include/linux/regulator/act8865.h
@@ -0,0 +1,88 @@
+/*
+ * act8865.h -- Voltage regulation for active-semi act88xx PMUs
+ *
+ * Copyright (C) 2013 Atmel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __LINUX_REGULATOR_ACT8865_H
+#define __LINUX_REGULATOR_ACT8865_H
+
+#include <linux/regulator/machine.h>
+
+enum {
+ ACT8600_ID_DCDC1,
+ ACT8600_ID_DCDC2,
+ ACT8600_ID_DCDC3,
+ ACT8600_ID_SUDCDC4,
+ ACT8600_ID_LDO5,
+ ACT8600_ID_LDO6,
+ ACT8600_ID_LDO7,
+ ACT8600_ID_LDO8,
+ ACT8600_ID_LDO9,
+ ACT8600_ID_LDO10,
+};
+
+enum {
+ ACT8865_ID_DCDC1,
+ ACT8865_ID_DCDC2,
+ ACT8865_ID_DCDC3,
+ ACT8865_ID_LDO1,
+ ACT8865_ID_LDO2,
+ ACT8865_ID_LDO3,
+ ACT8865_ID_LDO4,
+ ACT8865_REG_NUM,
+};
+
+enum {
+ ACT8846_ID_REG1,
+ ACT8846_ID_REG2,
+ ACT8846_ID_REG3,
+ ACT8846_ID_REG4,
+ ACT8846_ID_REG5,
+ ACT8846_ID_REG6,
+ ACT8846_ID_REG7,
+ ACT8846_ID_REG8,
+ ACT8846_ID_REG9,
+ ACT8846_ID_REG10,
+ ACT8846_ID_REG11,
+ ACT8846_ID_REG12,
+ ACT8846_REG_NUM,
+};
+
+enum {
+ ACT8600,
+ ACT8865,
+ ACT8846,
+};
+
+/**
+ * act8865_regulator_data - regulator data
+ * @id: regulator id
+ * @name: regulator name
+ * @platform_data: regulator init data
+ */
+struct act8865_regulator_data {
+ int id;
+ const char *name;
+ struct regulator_init_data *platform_data;
+};
+
+/**
+ * act8865_platform_data - platform data for act8865
+ * @num_regulators: number of regulators used
+ * @regulators: pointer to regulators used
+ */
+struct act8865_platform_data {
+ int num_regulators;
+ struct act8865_regulator_data *regulators;
+};
+#endif
diff --git a/include/linux/regulator/consumer.h b/include/linux/regulator/consumer.h
new file mode 100644
index 000000000..f8a689ed6
--- /dev/null
+++ b/include/linux/regulator/consumer.h
@@ -0,0 +1,573 @@
+/*
+ * consumer.h -- SoC Regulator consumer support.
+ *
+ * Copyright (C) 2007, 2008 Wolfson Microelectronics PLC.
+ *
+ * Author: Liam Girdwood <lrg@slimlogic.co.uk>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Regulator Consumer Interface.
+ *
+ * A Power Management Regulator framework for SoC based devices.
+ * Features:-
+ * o Voltage and current level control.
+ * o Operating mode control.
+ * o Regulator status.
+ * o sysfs entries for showing client devices and status
+ *
+ * EXPERIMENTAL FEATURES:
+ * Dynamic Regulator operating Mode Switching (DRMS) - allows regulators
+ * to use most efficient operating mode depending upon voltage and load and
+ * is transparent to client drivers.
+ *
+ * e.g. Devices x,y,z share regulator r. Device x and y draw 20mA each during
+ * IO and 1mA at idle. Device z draws 100mA when under load and 5mA when
+ * idling. Regulator r has > 90% efficiency in NORMAL mode at loads > 100mA
+ * but this drops rapidly to 60% when below 100mA. Regulator r has > 90%
+ * efficiency in IDLE mode at loads < 10mA. Thus regulator r will operate
+ * in normal mode for loads > 10mA and in IDLE mode for load <= 10mA.
+ *
+ */
+
+#ifndef __LINUX_REGULATOR_CONSUMER_H_
+#define __LINUX_REGULATOR_CONSUMER_H_
+
+#include <linux/err.h>
+
+struct device;
+struct notifier_block;
+struct regmap;
+
+/*
+ * Regulator operating modes.
+ *
+ * Regulators can run in a variety of different operating modes depending on
+ * output load. This allows further system power savings by selecting the
+ * best (and most efficient) regulator mode for a desired load.
+ *
+ * Most drivers will only care about NORMAL. The modes below are generic and
+ * will probably not match the naming convention of your regulator data sheet
+ * but should match the use cases in the datasheet.
+ *
+ * In order of power efficiency (least efficient at top).
+ *
+ * Mode Description
+ * FAST Regulator can handle fast changes in it's load.
+ * e.g. useful in CPU voltage & frequency scaling where
+ * load can quickly increase with CPU frequency increases.
+ *
+ * NORMAL Normal regulator power supply mode. Most drivers will
+ * use this mode.
+ *
+ * IDLE Regulator runs in a more efficient mode for light
+ * loads. Can be used for devices that have a low power
+ * requirement during periods of inactivity. This mode
+ * may be more noisy than NORMAL and may not be able
+ * to handle fast load switching.
+ *
+ * STANDBY Regulator runs in the most efficient mode for very
+ * light loads. Can be used by devices when they are
+ * in a sleep/standby state. This mode is likely to be
+ * the most noisy and may not be able to handle fast load
+ * switching.
+ *
+ * NOTE: Most regulators will only support a subset of these modes. Some
+ * will only just support NORMAL.
+ *
+ * These modes can be OR'ed together to make up a mask of valid register modes.
+ */
+
+#define REGULATOR_MODE_FAST 0x1
+#define REGULATOR_MODE_NORMAL 0x2
+#define REGULATOR_MODE_IDLE 0x4
+#define REGULATOR_MODE_STANDBY 0x8
+
+/*
+ * Regulator notifier events.
+ *
+ * UNDER_VOLTAGE Regulator output is under voltage.
+ * OVER_CURRENT Regulator output current is too high.
+ * REGULATION_OUT Regulator output is out of regulation.
+ * FAIL Regulator output has failed.
+ * OVER_TEMP Regulator over temp.
+ * FORCE_DISABLE Regulator forcibly shut down by software.
+ * VOLTAGE_CHANGE Regulator voltage changed.
+ * Data passed is old voltage cast to (void *).
+ * DISABLE Regulator was disabled.
+ * PRE_VOLTAGE_CHANGE Regulator is about to have voltage changed.
+ * Data passed is "struct pre_voltage_change_data"
+ * ABORT_VOLTAGE_CHANGE Regulator voltage change failed for some reason.
+ * Data passed is old voltage cast to (void *).
+ * PRE_DISABLE Regulator is about to be disabled
+ * ABORT_DISABLE Regulator disable failed for some reason
+ *
+ * NOTE: These events can be OR'ed together when passed into handler.
+ */
+
+#define REGULATOR_EVENT_UNDER_VOLTAGE 0x01
+#define REGULATOR_EVENT_OVER_CURRENT 0x02
+#define REGULATOR_EVENT_REGULATION_OUT 0x04
+#define REGULATOR_EVENT_FAIL 0x08
+#define REGULATOR_EVENT_OVER_TEMP 0x10
+#define REGULATOR_EVENT_FORCE_DISABLE 0x20
+#define REGULATOR_EVENT_VOLTAGE_CHANGE 0x40
+#define REGULATOR_EVENT_DISABLE 0x80
+#define REGULATOR_EVENT_PRE_VOLTAGE_CHANGE 0x100
+#define REGULATOR_EVENT_ABORT_VOLTAGE_CHANGE 0x200
+#define REGULATOR_EVENT_PRE_DISABLE 0x400
+#define REGULATOR_EVENT_ABORT_DISABLE 0x800
+
+/**
+ * struct pre_voltage_change_data - Data sent with PRE_VOLTAGE_CHANGE event
+ *
+ * @old_uV: Current voltage before change.
+ * @min_uV: Min voltage we'll change to.
+ * @max_uV: Max voltage we'll change to.
+ */
+struct pre_voltage_change_data {
+ unsigned long old_uV;
+ unsigned long min_uV;
+ unsigned long max_uV;
+};
+
+struct regulator;
+
+/**
+ * struct regulator_bulk_data - Data used for bulk regulator operations.
+ *
+ * @supply: The name of the supply. Initialised by the user before
+ * using the bulk regulator APIs.
+ * @consumer: The regulator consumer for the supply. This will be managed
+ * by the bulk API.
+ *
+ * The regulator APIs provide a series of regulator_bulk_() API calls as
+ * a convenience to consumers which require multiple supplies. This
+ * structure is used to manage data for these calls.
+ */
+struct regulator_bulk_data {
+ const char *supply;
+ struct regulator *consumer;
+
+ /* private: Internal use */
+ int ret;
+};
+
+#if defined(CONFIG_REGULATOR)
+
+/* regulator get and put */
+struct regulator *__must_check regulator_get(struct device *dev,
+ const char *id);
+struct regulator *__must_check devm_regulator_get(struct device *dev,
+ const char *id);
+struct regulator *__must_check regulator_get_exclusive(struct device *dev,
+ const char *id);
+struct regulator *__must_check devm_regulator_get_exclusive(struct device *dev,
+ const char *id);
+struct regulator *__must_check regulator_get_optional(struct device *dev,
+ const char *id);
+struct regulator *__must_check devm_regulator_get_optional(struct device *dev,
+ const char *id);
+void regulator_put(struct regulator *regulator);
+void devm_regulator_put(struct regulator *regulator);
+
+int regulator_register_supply_alias(struct device *dev, const char *id,
+ struct device *alias_dev,
+ const char *alias_id);
+void regulator_unregister_supply_alias(struct device *dev, const char *id);
+
+int regulator_bulk_register_supply_alias(struct device *dev,
+ const char *const *id,
+ struct device *alias_dev,
+ const char *const *alias_id,
+ int num_id);
+void regulator_bulk_unregister_supply_alias(struct device *dev,
+ const char * const *id, int num_id);
+
+int devm_regulator_register_supply_alias(struct device *dev, const char *id,
+ struct device *alias_dev,
+ const char *alias_id);
+void devm_regulator_unregister_supply_alias(struct device *dev,
+ const char *id);
+
+int devm_regulator_bulk_register_supply_alias(struct device *dev,
+ const char *const *id,
+ struct device *alias_dev,
+ const char *const *alias_id,
+ int num_id);
+void devm_regulator_bulk_unregister_supply_alias(struct device *dev,
+ const char *const *id,
+ int num_id);
+
+/* regulator output control and status */
+int __must_check regulator_enable(struct regulator *regulator);
+int regulator_disable(struct regulator *regulator);
+int regulator_force_disable(struct regulator *regulator);
+int regulator_is_enabled(struct regulator *regulator);
+int regulator_disable_deferred(struct regulator *regulator, int ms);
+
+int __must_check regulator_bulk_get(struct device *dev, int num_consumers,
+ struct regulator_bulk_data *consumers);
+int __must_check devm_regulator_bulk_get(struct device *dev, int num_consumers,
+ struct regulator_bulk_data *consumers);
+int __must_check regulator_bulk_enable(int num_consumers,
+ struct regulator_bulk_data *consumers);
+int regulator_bulk_disable(int num_consumers,
+ struct regulator_bulk_data *consumers);
+int regulator_bulk_force_disable(int num_consumers,
+ struct regulator_bulk_data *consumers);
+void regulator_bulk_free(int num_consumers,
+ struct regulator_bulk_data *consumers);
+
+int regulator_can_change_voltage(struct regulator *regulator);
+int regulator_count_voltages(struct regulator *regulator);
+int regulator_list_voltage(struct regulator *regulator, unsigned selector);
+int regulator_is_supported_voltage(struct regulator *regulator,
+ int min_uV, int max_uV);
+unsigned int regulator_get_linear_step(struct regulator *regulator);
+int regulator_set_voltage(struct regulator *regulator, int min_uV, int max_uV);
+int regulator_set_voltage_time(struct regulator *regulator,
+ int old_uV, int new_uV);
+int regulator_get_voltage(struct regulator *regulator);
+int regulator_sync_voltage(struct regulator *regulator);
+int regulator_set_current_limit(struct regulator *regulator,
+ int min_uA, int max_uA);
+int regulator_get_current_limit(struct regulator *regulator);
+
+int regulator_set_mode(struct regulator *regulator, unsigned int mode);
+unsigned int regulator_get_mode(struct regulator *regulator);
+int regulator_set_load(struct regulator *regulator, int load_uA);
+
+int regulator_allow_bypass(struct regulator *regulator, bool allow);
+
+struct regmap *regulator_get_regmap(struct regulator *regulator);
+int regulator_get_hardware_vsel_register(struct regulator *regulator,
+ unsigned *vsel_reg,
+ unsigned *vsel_mask);
+int regulator_list_hardware_vsel(struct regulator *regulator,
+ unsigned selector);
+
+/* regulator notifier block */
+int regulator_register_notifier(struct regulator *regulator,
+ struct notifier_block *nb);
+int devm_regulator_register_notifier(struct regulator *regulator,
+ struct notifier_block *nb);
+int regulator_unregister_notifier(struct regulator *regulator,
+ struct notifier_block *nb);
+void devm_regulator_unregister_notifier(struct regulator *regulator,
+ struct notifier_block *nb);
+
+/* driver data - core doesn't touch */
+void *regulator_get_drvdata(struct regulator *regulator);
+void regulator_set_drvdata(struct regulator *regulator, void *data);
+
+#else
+
+/*
+ * Make sure client drivers will still build on systems with no software
+ * controllable voltage or current regulators.
+ */
+static inline struct regulator *__must_check regulator_get(struct device *dev,
+ const char *id)
+{
+ /* Nothing except the stubbed out regulator API should be
+ * looking at the value except to check if it is an error
+ * value. Drivers are free to handle NULL specifically by
+ * skipping all regulator API calls, but they don't have to.
+ * Drivers which don't, should make sure they properly handle
+ * corner cases of the API, such as regulator_get_voltage()
+ * returning 0.
+ */
+ return NULL;
+}
+
+static inline struct regulator *__must_check
+devm_regulator_get(struct device *dev, const char *id)
+{
+ return NULL;
+}
+
+static inline struct regulator *__must_check
+regulator_get_exclusive(struct device *dev, const char *id)
+{
+ return ERR_PTR(-ENODEV);
+}
+
+static inline struct regulator *__must_check
+regulator_get_optional(struct device *dev, const char *id)
+{
+ return ERR_PTR(-ENODEV);
+}
+
+
+static inline struct regulator *__must_check
+devm_regulator_get_optional(struct device *dev, const char *id)
+{
+ return ERR_PTR(-ENODEV);
+}
+
+static inline void regulator_put(struct regulator *regulator)
+{
+}
+
+static inline void devm_regulator_put(struct regulator *regulator)
+{
+}
+
+static inline int regulator_register_supply_alias(struct device *dev,
+ const char *id,
+ struct device *alias_dev,
+ const char *alias_id)
+{
+ return 0;
+}
+
+static inline void regulator_unregister_supply_alias(struct device *dev,
+ const char *id)
+{
+}
+
+static inline int regulator_bulk_register_supply_alias(struct device *dev,
+ const char *const *id,
+ struct device *alias_dev,
+ const char * const *alias_id,
+ int num_id)
+{
+ return 0;
+}
+
+static inline void regulator_bulk_unregister_supply_alias(struct device *dev,
+ const char * const *id,
+ int num_id)
+{
+}
+
+static inline int devm_regulator_register_supply_alias(struct device *dev,
+ const char *id,
+ struct device *alias_dev,
+ const char *alias_id)
+{
+ return 0;
+}
+
+static inline void devm_regulator_unregister_supply_alias(struct device *dev,
+ const char *id)
+{
+}
+
+static inline int devm_regulator_bulk_register_supply_alias(struct device *dev,
+ const char *const *id,
+ struct device *alias_dev,
+ const char *const *alias_id,
+ int num_id)
+{
+ return 0;
+}
+
+static inline void devm_regulator_bulk_unregister_supply_alias(
+ struct device *dev, const char *const *id, int num_id)
+{
+}
+
+static inline int regulator_enable(struct regulator *regulator)
+{
+ return 0;
+}
+
+static inline int regulator_disable(struct regulator *regulator)
+{
+ return 0;
+}
+
+static inline int regulator_force_disable(struct regulator *regulator)
+{
+ return 0;
+}
+
+static inline int regulator_disable_deferred(struct regulator *regulator,
+ int ms)
+{
+ return 0;
+}
+
+static inline int regulator_is_enabled(struct regulator *regulator)
+{
+ return 1;
+}
+
+static inline int regulator_bulk_get(struct device *dev,
+ int num_consumers,
+ struct regulator_bulk_data *consumers)
+{
+ return 0;
+}
+
+static inline int devm_regulator_bulk_get(struct device *dev, int num_consumers,
+ struct regulator_bulk_data *consumers)
+{
+ return 0;
+}
+
+static inline int regulator_bulk_enable(int num_consumers,
+ struct regulator_bulk_data *consumers)
+{
+ return 0;
+}
+
+static inline int regulator_bulk_disable(int num_consumers,
+ struct regulator_bulk_data *consumers)
+{
+ return 0;
+}
+
+static inline int regulator_bulk_force_disable(int num_consumers,
+ struct regulator_bulk_data *consumers)
+{
+ return 0;
+}
+
+static inline void regulator_bulk_free(int num_consumers,
+ struct regulator_bulk_data *consumers)
+{
+}
+
+static inline int regulator_can_change_voltage(struct regulator *regulator)
+{
+ return 0;
+}
+
+static inline int regulator_set_voltage(struct regulator *regulator,
+ int min_uV, int max_uV)
+{
+ return 0;
+}
+
+static inline int regulator_set_voltage_time(struct regulator *regulator,
+ int old_uV, int new_uV)
+{
+ return 0;
+}
+
+static inline int regulator_get_voltage(struct regulator *regulator)
+{
+ return -EINVAL;
+}
+
+static inline int regulator_is_supported_voltage(struct regulator *regulator,
+ int min_uV, int max_uV)
+{
+ return 0;
+}
+
+static inline int regulator_set_current_limit(struct regulator *regulator,
+ int min_uA, int max_uA)
+{
+ return 0;
+}
+
+static inline int regulator_get_current_limit(struct regulator *regulator)
+{
+ return 0;
+}
+
+static inline int regulator_set_mode(struct regulator *regulator,
+ unsigned int mode)
+{
+ return 0;
+}
+
+static inline unsigned int regulator_get_mode(struct regulator *regulator)
+{
+ return REGULATOR_MODE_NORMAL;
+}
+
+static inline int regulator_set_load(struct regulator *regulator, int load_uA)
+{
+ return REGULATOR_MODE_NORMAL;
+}
+
+static inline int regulator_allow_bypass(struct regulator *regulator,
+ bool allow)
+{
+ return 0;
+}
+
+static inline struct regmap *regulator_get_regmap(struct regulator *regulator)
+{
+ return ERR_PTR(-EOPNOTSUPP);
+}
+
+static inline int regulator_get_hardware_vsel_register(struct regulator *regulator,
+ unsigned *vsel_reg,
+ unsigned *vsel_mask)
+{
+ return -EOPNOTSUPP;
+}
+
+static inline int regulator_list_hardware_vsel(struct regulator *regulator,
+ unsigned selector)
+{
+ return -EOPNOTSUPP;
+}
+
+static inline int regulator_register_notifier(struct regulator *regulator,
+ struct notifier_block *nb)
+{
+ return 0;
+}
+
+static inline int devm_regulator_register_notifier(struct regulator *regulator,
+ struct notifier_block *nb)
+{
+ return 0;
+}
+
+static inline int regulator_unregister_notifier(struct regulator *regulator,
+ struct notifier_block *nb)
+{
+ return 0;
+}
+
+static inline int devm_regulator_unregister_notifier(struct regulator *regulator,
+ struct notifier_block *nb)
+{
+ return 0;
+}
+
+static inline void *regulator_get_drvdata(struct regulator *regulator)
+{
+ return NULL;
+}
+
+static inline void regulator_set_drvdata(struct regulator *regulator,
+ void *data)
+{
+}
+
+static inline int regulator_count_voltages(struct regulator *regulator)
+{
+ return 0;
+}
+#endif
+
+static inline int regulator_set_voltage_tol(struct regulator *regulator,
+ int new_uV, int tol_uV)
+{
+ if (regulator_set_voltage(regulator, new_uV, new_uV + tol_uV) == 0)
+ return 0;
+ else
+ return regulator_set_voltage(regulator,
+ new_uV - tol_uV, new_uV + tol_uV);
+}
+
+static inline int regulator_is_supported_voltage_tol(struct regulator *regulator,
+ int target_uV, int tol_uV)
+{
+ return regulator_is_supported_voltage(regulator,
+ target_uV - tol_uV,
+ target_uV + tol_uV);
+}
+
+#endif
diff --git a/include/linux/regulator/da9211.h b/include/linux/regulator/da9211.h
new file mode 100644
index 000000000..5dd65acc2
--- /dev/null
+++ b/include/linux/regulator/da9211.h
@@ -0,0 +1,39 @@
+/*
+ * da9211.h - Regulator device driver for DA9211/DA9213
+ * Copyright (C) 2014 Dialog Semiconductor Ltd.
+ *
+ * This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU Library General Public
+ * License as published by the Free Software Foundation; either
+ * version 2 of the License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * Library General Public License for more details.
+ */
+
+#ifndef __LINUX_REGULATOR_DA9211_H
+#define __LINUX_REGULATOR_DA9211_H
+
+#include <linux/regulator/machine.h>
+
+#define DA9211_MAX_REGULATORS 2
+
+enum da9211_chip_id {
+ DA9211,
+ DA9213,
+};
+
+struct da9211_pdata {
+ /*
+ * Number of buck
+ * 1 : 4 phase 1 buck
+ * 2 : 2 phase 2 buck
+ */
+ int num_buck;
+ int gpio_ren[DA9211_MAX_REGULATORS];
+ struct device_node *reg_node[DA9211_MAX_REGULATORS];
+ struct regulator_init_data *init_data[DA9211_MAX_REGULATORS];
+};
+#endif
diff --git a/include/linux/regulator/db8500-prcmu.h b/include/linux/regulator/db8500-prcmu.h
new file mode 100644
index 000000000..612062313
--- /dev/null
+++ b/include/linux/regulator/db8500-prcmu.h
@@ -0,0 +1,45 @@
+/*
+ * Copyright (C) ST-Ericsson SA 2010
+ *
+ * License Terms: GNU General Public License v2
+ *
+ * Author: Bengt Jonsson <bengt.g.jonsson@stericsson.com> for ST-Ericsson
+ *
+ * Interface to power domain regulators on DB8500
+ */
+
+#ifndef __REGULATOR_H__
+#define __REGULATOR_H__
+
+/* Number of DB8500 regulators and regulator enumeration */
+enum db8500_regulator_id {
+ DB8500_REGULATOR_VAPE,
+ DB8500_REGULATOR_VARM,
+ DB8500_REGULATOR_VMODEM,
+ DB8500_REGULATOR_VPLL,
+ DB8500_REGULATOR_VSMPS1,
+ DB8500_REGULATOR_VSMPS2,
+ DB8500_REGULATOR_VSMPS3,
+ DB8500_REGULATOR_VRF1,
+ DB8500_REGULATOR_SWITCH_SVAMMDSP,
+ DB8500_REGULATOR_SWITCH_SVAMMDSPRET,
+ DB8500_REGULATOR_SWITCH_SVAPIPE,
+ DB8500_REGULATOR_SWITCH_SIAMMDSP,
+ DB8500_REGULATOR_SWITCH_SIAMMDSPRET,
+ DB8500_REGULATOR_SWITCH_SIAPIPE,
+ DB8500_REGULATOR_SWITCH_SGA,
+ DB8500_REGULATOR_SWITCH_B2R2_MCDE,
+ DB8500_REGULATOR_SWITCH_ESRAM12,
+ DB8500_REGULATOR_SWITCH_ESRAM12RET,
+ DB8500_REGULATOR_SWITCH_ESRAM34,
+ DB8500_REGULATOR_SWITCH_ESRAM34RET,
+ DB8500_NUM_REGULATORS
+};
+
+/*
+ * Exported interface for CPUIdle only. This function is called with all
+ * interrupts turned off.
+ */
+int power_state_active_is_enabled(void);
+
+#endif
diff --git a/include/linux/regulator/driver.h b/include/linux/regulator/driver.h
new file mode 100644
index 000000000..fffa688ac
--- /dev/null
+++ b/include/linux/regulator/driver.h
@@ -0,0 +1,436 @@
+/*
+ * driver.h -- SoC Regulator driver support.
+ *
+ * Copyright (C) 2007, 2008 Wolfson Microelectronics PLC.
+ *
+ * Author: Liam Girdwood <lrg@slimlogic.co.uk>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Regulator Driver Interface.
+ */
+
+#ifndef __LINUX_REGULATOR_DRIVER_H_
+#define __LINUX_REGULATOR_DRIVER_H_
+
+#include <linux/device.h>
+#include <linux/notifier.h>
+#include <linux/regulator/consumer.h>
+
+struct regmap;
+struct regulator_dev;
+struct regulator_config;
+struct regulator_init_data;
+struct regulator_enable_gpio;
+
+enum regulator_status {
+ REGULATOR_STATUS_OFF,
+ REGULATOR_STATUS_ON,
+ REGULATOR_STATUS_ERROR,
+ /* fast/normal/idle/standby are flavors of "on" */
+ REGULATOR_STATUS_FAST,
+ REGULATOR_STATUS_NORMAL,
+ REGULATOR_STATUS_IDLE,
+ REGULATOR_STATUS_STANDBY,
+ /* The regulator is enabled but not regulating */
+ REGULATOR_STATUS_BYPASS,
+ /* in case that any other status doesn't apply */
+ REGULATOR_STATUS_UNDEFINED,
+};
+
+/**
+ * struct regulator_linear_range - specify linear voltage ranges
+ *
+ * Specify a range of voltages for regulator_map_linar_range() and
+ * regulator_list_linear_range().
+ *
+ * @min_uV: Lowest voltage in range
+ * @min_sel: Lowest selector for range
+ * @max_sel: Highest selector for range
+ * @uV_step: Step size
+ */
+struct regulator_linear_range {
+ unsigned int min_uV;
+ unsigned int min_sel;
+ unsigned int max_sel;
+ unsigned int uV_step;
+};
+
+/* Initialize struct regulator_linear_range */
+#define REGULATOR_LINEAR_RANGE(_min_uV, _min_sel, _max_sel, _step_uV) \
+{ \
+ .min_uV = _min_uV, \
+ .min_sel = _min_sel, \
+ .max_sel = _max_sel, \
+ .uV_step = _step_uV, \
+}
+
+/**
+ * struct regulator_ops - regulator operations.
+ *
+ * @enable: Configure the regulator as enabled.
+ * @disable: Configure the regulator as disabled.
+ * @is_enabled: Return 1 if the regulator is enabled, 0 if not.
+ * May also return negative errno.
+ *
+ * @set_voltage: Set the voltage for the regulator within the range specified.
+ * The driver should select the voltage closest to min_uV.
+ * @set_voltage_sel: Set the voltage for the regulator using the specified
+ * selector.
+ * @map_voltage: Convert a voltage into a selector
+ * @get_voltage: Return the currently configured voltage for the regulator.
+ * @get_voltage_sel: Return the currently configured voltage selector for the
+ * regulator.
+ * @list_voltage: Return one of the supported voltages, in microvolts; zero
+ * if the selector indicates a voltage that is unusable on this system;
+ * or negative errno. Selectors range from zero to one less than
+ * regulator_desc.n_voltages. Voltages may be reported in any order.
+ *
+ * @set_current_limit: Configure a limit for a current-limited regulator.
+ * The driver should select the current closest to max_uA.
+ * @get_current_limit: Get the configured limit for a current-limited regulator.
+ *
+ * @set_mode: Set the configured operating mode for the regulator.
+ * @get_mode: Get the configured operating mode for the regulator.
+ * @get_status: Return actual (not as-configured) status of regulator, as a
+ * REGULATOR_STATUS value (or negative errno)
+ * @get_optimum_mode: Get the most efficient operating mode for the regulator
+ * when running with the specified parameters.
+ * @set_load: Set the load for the regulator.
+ *
+ * @set_bypass: Set the regulator in bypass mode.
+ * @get_bypass: Get the regulator bypass mode state.
+ *
+ * @enable_time: Time taken for the regulator voltage output voltage to
+ * stabilise after being enabled, in microseconds.
+ * @set_ramp_delay: Set the ramp delay for the regulator. The driver should
+ * select ramp delay equal to or less than(closest) ramp_delay.
+ * @set_voltage_time_sel: Time taken for the regulator voltage output voltage
+ * to stabilise after being set to a new value, in microseconds.
+ * The function provides the from and to voltage selector, the
+ * function should return the worst case.
+ *
+ * @set_suspend_voltage: Set the voltage for the regulator when the system
+ * is suspended.
+ * @set_suspend_enable: Mark the regulator as enabled when the system is
+ * suspended.
+ * @set_suspend_disable: Mark the regulator as disabled when the system is
+ * suspended.
+ * @set_suspend_mode: Set the operating mode for the regulator when the
+ * system is suspended.
+ *
+ * This struct describes regulator operations which can be implemented by
+ * regulator chip drivers.
+ */
+struct regulator_ops {
+
+ /* enumerate supported voltages */
+ int (*list_voltage) (struct regulator_dev *, unsigned selector);
+
+ /* get/set regulator voltage */
+ int (*set_voltage) (struct regulator_dev *, int min_uV, int max_uV,
+ unsigned *selector);
+ int (*map_voltage)(struct regulator_dev *, int min_uV, int max_uV);
+ int (*set_voltage_sel) (struct regulator_dev *, unsigned selector);
+ int (*get_voltage) (struct regulator_dev *);
+ int (*get_voltage_sel) (struct regulator_dev *);
+
+ /* get/set regulator current */
+ int (*set_current_limit) (struct regulator_dev *,
+ int min_uA, int max_uA);
+ int (*get_current_limit) (struct regulator_dev *);
+
+ /* enable/disable regulator */
+ int (*enable) (struct regulator_dev *);
+ int (*disable) (struct regulator_dev *);
+ int (*is_enabled) (struct regulator_dev *);
+
+ /* get/set regulator operating mode (defined in consumer.h) */
+ int (*set_mode) (struct regulator_dev *, unsigned int mode);
+ unsigned int (*get_mode) (struct regulator_dev *);
+
+ /* Time taken to enable or set voltage on the regulator */
+ int (*enable_time) (struct regulator_dev *);
+ int (*set_ramp_delay) (struct regulator_dev *, int ramp_delay);
+ int (*set_voltage_time_sel) (struct regulator_dev *,
+ unsigned int old_selector,
+ unsigned int new_selector);
+
+ /* report regulator status ... most other accessors report
+ * control inputs, this reports results of combining inputs
+ * from Linux (and other sources) with the actual load.
+ * returns REGULATOR_STATUS_* or negative errno.
+ */
+ int (*get_status)(struct regulator_dev *);
+
+ /* get most efficient regulator operating mode for load */
+ unsigned int (*get_optimum_mode) (struct regulator_dev *, int input_uV,
+ int output_uV, int load_uA);
+ /* set the load on the regulator */
+ int (*set_load)(struct regulator_dev *, int load_uA);
+
+ /* control and report on bypass mode */
+ int (*set_bypass)(struct regulator_dev *dev, bool enable);
+ int (*get_bypass)(struct regulator_dev *dev, bool *enable);
+
+ /* the operations below are for configuration of regulator state when
+ * its parent PMIC enters a global STANDBY/HIBERNATE state */
+
+ /* set regulator suspend voltage */
+ int (*set_suspend_voltage) (struct regulator_dev *, int uV);
+
+ /* enable/disable regulator in suspend state */
+ int (*set_suspend_enable) (struct regulator_dev *);
+ int (*set_suspend_disable) (struct regulator_dev *);
+
+ /* set regulator suspend operating mode (defined in consumer.h) */
+ int (*set_suspend_mode) (struct regulator_dev *, unsigned int mode);
+};
+
+/*
+ * Regulators can either control voltage or current.
+ */
+enum regulator_type {
+ REGULATOR_VOLTAGE,
+ REGULATOR_CURRENT,
+};
+
+/**
+ * struct regulator_desc - Static regulator descriptor
+ *
+ * Each regulator registered with the core is described with a
+ * structure of this type and a struct regulator_config. This
+ * structure contains the non-varying parts of the regulator
+ * description.
+ *
+ * @name: Identifying name for the regulator.
+ * @supply_name: Identifying the regulator supply
+ * @of_match: Name used to identify regulator in DT.
+ * @regulators_node: Name of node containing regulator definitions in DT.
+ * @of_parse_cb: Optional callback called only if of_match is present.
+ * Will be called for each regulator parsed from DT, during
+ * init_data parsing.
+ * The regulator_config passed as argument to the callback will
+ * be a copy of config passed to regulator_register, valid only
+ * for this particular call. Callback may freely change the
+ * config but it cannot store it for later usage.
+ * Callback should return 0 on success or negative ERRNO
+ * indicating failure.
+ * @id: Numerical identifier for the regulator.
+ * @ops: Regulator operations table.
+ * @irq: Interrupt number for the regulator.
+ * @type: Indicates if the regulator is a voltage or current regulator.
+ * @owner: Module providing the regulator, used for refcounting.
+ *
+ * @continuous_voltage_range: Indicates if the regulator can set any
+ * voltage within constrains range.
+ * @n_voltages: Number of selectors available for ops.list_voltage().
+ *
+ * @min_uV: Voltage given by the lowest selector (if linear mapping)
+ * @uV_step: Voltage increase with each selector (if linear mapping)
+ * @linear_min_sel: Minimal selector for starting linear mapping
+ * @fixed_uV: Fixed voltage of rails.
+ * @ramp_delay: Time to settle down after voltage change (unit: uV/us)
+ * @linear_ranges: A constant table of possible voltage ranges.
+ * @n_linear_ranges: Number of entries in the @linear_ranges table.
+ * @volt_table: Voltage mapping table (if table based mapping)
+ *
+ * @vsel_reg: Register for selector when using regulator_regmap_X_voltage_
+ * @vsel_mask: Mask for register bitfield used for selector
+ * @apply_reg: Register for initiate voltage change on the output when
+ * using regulator_set_voltage_sel_regmap
+ * @apply_bit: Register bitfield used for initiate voltage change on the
+ * output when using regulator_set_voltage_sel_regmap
+ * @enable_reg: Register for control when using regmap enable/disable ops
+ * @enable_mask: Mask for control when using regmap enable/disable ops
+ * @enable_val: Enabling value for control when using regmap enable/disable ops
+ * @disable_val: Disabling value for control when using regmap enable/disable ops
+ * @enable_is_inverted: A flag to indicate set enable_mask bits to disable
+ * when using regulator_enable_regmap and friends APIs.
+ * @bypass_reg: Register for control when using regmap set_bypass
+ * @bypass_mask: Mask for control when using regmap set_bypass
+ * @bypass_val_on: Enabling value for control when using regmap set_bypass
+ * @bypass_val_off: Disabling value for control when using regmap set_bypass
+ *
+ * @enable_time: Time taken for initial enable of regulator (in uS).
+ * @off_on_delay: guard time (in uS), before re-enabling a regulator
+ *
+ * @of_map_mode: Maps a hardware mode defined in a DeviceTree to a standard mode
+ */
+struct regulator_desc {
+ const char *name;
+ const char *supply_name;
+ const char *of_match;
+ const char *regulators_node;
+ int (*of_parse_cb)(struct device_node *,
+ const struct regulator_desc *,
+ struct regulator_config *);
+ int id;
+ bool continuous_voltage_range;
+ unsigned n_voltages;
+ const struct regulator_ops *ops;
+ int irq;
+ enum regulator_type type;
+ struct module *owner;
+
+ unsigned int min_uV;
+ unsigned int uV_step;
+ unsigned int linear_min_sel;
+ int fixed_uV;
+ unsigned int ramp_delay;
+
+ const struct regulator_linear_range *linear_ranges;
+ int n_linear_ranges;
+
+ const unsigned int *volt_table;
+
+ unsigned int vsel_reg;
+ unsigned int vsel_mask;
+ unsigned int apply_reg;
+ unsigned int apply_bit;
+ unsigned int enable_reg;
+ unsigned int enable_mask;
+ unsigned int enable_val;
+ unsigned int disable_val;
+ bool enable_is_inverted;
+ unsigned int bypass_reg;
+ unsigned int bypass_mask;
+ unsigned int bypass_val_on;
+ unsigned int bypass_val_off;
+
+ unsigned int enable_time;
+
+ unsigned int off_on_delay;
+
+ unsigned int (*of_map_mode)(unsigned int mode);
+};
+
+/**
+ * struct regulator_config - Dynamic regulator descriptor
+ *
+ * Each regulator registered with the core is described with a
+ * structure of this type and a struct regulator_desc. This structure
+ * contains the runtime variable parts of the regulator description.
+ *
+ * @dev: struct device for the regulator
+ * @init_data: platform provided init data, passed through by driver
+ * @driver_data: private regulator data
+ * @of_node: OpenFirmware node to parse for device tree bindings (may be
+ * NULL).
+ * @regmap: regmap to use for core regmap helpers if dev_get_regmap() is
+ * insufficient.
+ * @ena_gpio_initialized: GPIO controlling regulator enable was properly
+ * initialized, meaning that >= 0 is a valid gpio
+ * identifier and < 0 is a non existent gpio.
+ * @ena_gpio: GPIO controlling regulator enable.
+ * @ena_gpio_invert: Sense for GPIO enable control.
+ * @ena_gpio_flags: Flags to use when calling gpio_request_one()
+ */
+struct regulator_config {
+ struct device *dev;
+ const struct regulator_init_data *init_data;
+ void *driver_data;
+ struct device_node *of_node;
+ struct regmap *regmap;
+
+ bool ena_gpio_initialized;
+ int ena_gpio;
+ unsigned int ena_gpio_invert:1;
+ unsigned int ena_gpio_flags;
+};
+
+/*
+ * struct regulator_dev
+ *
+ * Voltage / Current regulator class device. One for each
+ * regulator.
+ *
+ * This should *not* be used directly by anything except the regulator
+ * core and notification injection (which should take the mutex and do
+ * no other direct access).
+ */
+struct regulator_dev {
+ const struct regulator_desc *desc;
+ int exclusive;
+ u32 use_count;
+ u32 open_count;
+ u32 bypass_count;
+
+ /* lists we belong to */
+ struct list_head list; /* list of all regulators */
+
+ /* lists we own */
+ struct list_head consumer_list; /* consumers we supply */
+
+ struct blocking_notifier_head notifier;
+ struct mutex mutex; /* consumer lock */
+ struct module *owner;
+ struct device dev;
+ struct regulation_constraints *constraints;
+ struct regulator *supply; /* for tree */
+ const char *supply_name;
+ struct regmap *regmap;
+
+ struct delayed_work disable_work;
+ int deferred_disables;
+
+ void *reg_data; /* regulator_dev data */
+
+ struct dentry *debugfs;
+
+ struct regulator_enable_gpio *ena_pin;
+ unsigned int ena_gpio_state:1;
+
+ /* time when this regulator was disabled last time */
+ unsigned long last_off_jiffy;
+};
+
+struct regulator_dev *
+regulator_register(const struct regulator_desc *regulator_desc,
+ const struct regulator_config *config);
+struct regulator_dev *
+devm_regulator_register(struct device *dev,
+ const struct regulator_desc *regulator_desc,
+ const struct regulator_config *config);
+void regulator_unregister(struct regulator_dev *rdev);
+void devm_regulator_unregister(struct device *dev, struct regulator_dev *rdev);
+
+int regulator_notifier_call_chain(struct regulator_dev *rdev,
+ unsigned long event, void *data);
+
+void *rdev_get_drvdata(struct regulator_dev *rdev);
+struct device *rdev_get_dev(struct regulator_dev *rdev);
+int rdev_get_id(struct regulator_dev *rdev);
+
+int regulator_mode_to_status(unsigned int);
+
+int regulator_list_voltage_linear(struct regulator_dev *rdev,
+ unsigned int selector);
+int regulator_list_voltage_linear_range(struct regulator_dev *rdev,
+ unsigned int selector);
+int regulator_list_voltage_table(struct regulator_dev *rdev,
+ unsigned int selector);
+int regulator_map_voltage_linear(struct regulator_dev *rdev,
+ int min_uV, int max_uV);
+int regulator_map_voltage_linear_range(struct regulator_dev *rdev,
+ int min_uV, int max_uV);
+int regulator_map_voltage_iterate(struct regulator_dev *rdev,
+ int min_uV, int max_uV);
+int regulator_map_voltage_ascend(struct regulator_dev *rdev,
+ int min_uV, int max_uV);
+int regulator_get_voltage_sel_regmap(struct regulator_dev *rdev);
+int regulator_set_voltage_sel_regmap(struct regulator_dev *rdev, unsigned sel);
+int regulator_is_enabled_regmap(struct regulator_dev *rdev);
+int regulator_enable_regmap(struct regulator_dev *rdev);
+int regulator_disable_regmap(struct regulator_dev *rdev);
+int regulator_set_voltage_time_sel(struct regulator_dev *rdev,
+ unsigned int old_selector,
+ unsigned int new_selector);
+int regulator_set_bypass_regmap(struct regulator_dev *rdev, bool enable);
+int regulator_get_bypass_regmap(struct regulator_dev *rdev, bool *enable);
+
+void *regulator_get_init_drvdata(struct regulator_init_data *reg_init_data);
+
+#endif
diff --git a/include/linux/regulator/fan53555.h b/include/linux/regulator/fan53555.h
new file mode 100644
index 000000000..f13880e84
--- /dev/null
+++ b/include/linux/regulator/fan53555.h
@@ -0,0 +1,61 @@
+/*
+ * fan53555.h - Fairchild Regulator FAN53555 Driver
+ *
+ * Copyright (C) 2012 Marvell Technology Ltd.
+ * Yunfan Zhang <yfzhang@marvell.com>
+ *
+ * This package is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#ifndef __FAN53555_H__
+#define __FAN53555_H__
+
+/* VSEL ID */
+enum {
+ FAN53555_VSEL_ID_0 = 0,
+ FAN53555_VSEL_ID_1,
+};
+
+/* Transition slew rate limiting from a low to high voltage.
+ * -----------------------
+ * Bin |Slew Rate(mV/uS)
+ * ------|----------------
+ * 000 | 64.00
+ * ------|----------------
+ * 001 | 32.00
+ * ------|----------------
+ * 010 | 16.00
+ * ------|----------------
+ * 011 | 8.00
+ * ------|----------------
+ * 100 | 4.00
+ * ------|----------------
+ * 101 | 2.00
+ * ------|----------------
+ * 110 | 1.00
+ * ------|----------------
+ * 111 | 0.50
+ * -----------------------
+ */
+enum {
+ FAN53555_SLEW_RATE_64MV = 0,
+ FAN53555_SLEW_RATE_32MV,
+ FAN53555_SLEW_RATE_16MV,
+ FAN53555_SLEW_RATE_8MV,
+ FAN53555_SLEW_RATE_4MV,
+ FAN53555_SLEW_RATE_2MV,
+ FAN53555_SLEW_RATE_1MV,
+ FAN53555_SLEW_RATE_0_5MV,
+};
+
+struct fan53555_platform_data {
+ struct regulator_init_data *regulator;
+ unsigned int slew_rate;
+ /* Sleep VSEL ID */
+ unsigned int sleep_vsel_id;
+};
+
+#endif /* __FAN53555_H__ */
diff --git a/include/linux/regulator/fixed.h b/include/linux/regulator/fixed.h
new file mode 100644
index 000000000..48918be64
--- /dev/null
+++ b/include/linux/regulator/fixed.h
@@ -0,0 +1,76 @@
+/*
+ * fixed.h
+ *
+ * Copyright 2008 Wolfson Microelectronics PLC.
+ *
+ * Author: Mark Brown <broonie@opensource.wolfsonmicro.com>
+ *
+ * Copyright (c) 2009 Nokia Corporation
+ * Roger Quadros <ext-roger.quadros@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ */
+
+#ifndef __REGULATOR_FIXED_H
+#define __REGULATOR_FIXED_H
+
+struct regulator_init_data;
+
+/**
+ * struct fixed_voltage_config - fixed_voltage_config structure
+ * @supply_name: Name of the regulator supply
+ * @input_supply: Name of the input regulator supply
+ * @microvolts: Output voltage of regulator
+ * @gpio: GPIO to use for enable control
+ * set to -EINVAL if not used
+ * @startup_delay: Start-up time in microseconds
+ * @gpio_is_open_drain: Gpio pin is open drain or normal type.
+ * If it is open drain type then HIGH will be set
+ * through PULL-UP with setting gpio as input
+ * and low will be set as gpio-output with driven
+ * to low. For non-open-drain case, the gpio will
+ * will be in output and drive to low/high accordingly.
+ * @enable_high: Polarity of enable GPIO
+ * 1 = Active high, 0 = Active low
+ * @enabled_at_boot: Whether regulator has been enabled at
+ * boot or not. 1 = Yes, 0 = No
+ * This is used to keep the regulator at
+ * the default state
+ * @init_data: regulator_init_data
+ *
+ * This structure contains fixed voltage regulator configuration
+ * information that must be passed by platform code to the fixed
+ * voltage regulator driver.
+ */
+struct fixed_voltage_config {
+ const char *supply_name;
+ const char *input_supply;
+ int microvolts;
+ int gpio;
+ unsigned startup_delay;
+ unsigned gpio_is_open_drain:1;
+ unsigned enable_high:1;
+ unsigned enabled_at_boot:1;
+ struct regulator_init_data *init_data;
+};
+
+struct regulator_consumer_supply;
+
+#if IS_ENABLED(CONFIG_REGULATOR)
+struct platform_device *regulator_register_always_on(int id, const char *name,
+ struct regulator_consumer_supply *supplies, int num_supplies, int uv);
+#else
+static inline struct platform_device *regulator_register_always_on(int id, const char *name,
+ struct regulator_consumer_supply *supplies, int num_supplies, int uv)
+{
+ return NULL;
+}
+#endif
+
+#define regulator_register_fixed(id, s, ns) regulator_register_always_on(id, \
+ "fixed-dummy", s, ns, 0)
+
+#endif
diff --git a/include/linux/regulator/gpio-regulator.h b/include/linux/regulator/gpio-regulator.h
new file mode 100644
index 000000000..19fbd2674
--- /dev/null
+++ b/include/linux/regulator/gpio-regulator.h
@@ -0,0 +1,87 @@
+/*
+ * gpio-regulator.h
+ *
+ * Copyright 2011 Heiko Stuebner <heiko@sntech.de>
+ *
+ * based on fixed.h
+ *
+ * Copyright 2008 Wolfson Microelectronics PLC.
+ *
+ * Author: Mark Brown <broonie@opensource.wolfsonmicro.com>
+ *
+ * Copyright (c) 2009 Nokia Corporation
+ * Roger Quadros <ext-roger.quadros@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ */
+
+#ifndef __REGULATOR_GPIO_H
+#define __REGULATOR_GPIO_H
+
+struct regulator_init_data;
+
+enum regulator_type;
+
+/**
+ * struct gpio_regulator_state - state description
+ * @value: microvolts or microamps
+ * @gpios: bitfield of gpio target-states for the value
+ *
+ * This structure describes a supported setting of the regulator
+ * and the necessary gpio-state to achieve it.
+ *
+ * The n-th bit in the bitfield describes the state of the n-th GPIO
+ * from the gpios-array defined in gpio_regulator_config below.
+ */
+struct gpio_regulator_state {
+ int value;
+ int gpios;
+};
+
+/**
+ * struct gpio_regulator_config - config structure
+ * @supply_name: Name of the regulator supply
+ * @enable_gpio: GPIO to use for enable control
+ * set to -EINVAL if not used
+ * @enable_high: Polarity of enable GPIO
+ * 1 = Active high, 0 = Active low
+ * @enabled_at_boot: Whether regulator has been enabled at
+ * boot or not. 1 = Yes, 0 = No
+ * This is used to keep the regulator at
+ * the default state
+ * @startup_delay: Start-up time in microseconds
+ * @gpios: Array containing the gpios needed to control
+ * the setting of the regulator
+ * @nr_gpios: Number of gpios
+ * @states: Array of gpio_regulator_state entries describing
+ * the gpio state for specific voltages
+ * @nr_states: Number of states available
+ * @regulator_type: either REGULATOR_CURRENT or REGULATOR_VOLTAGE
+ * @init_data: regulator_init_data
+ *
+ * This structure contains gpio-voltage regulator configuration
+ * information that must be passed by platform code to the
+ * gpio-voltage regulator driver.
+ */
+struct gpio_regulator_config {
+ const char *supply_name;
+
+ int enable_gpio;
+ unsigned enable_high:1;
+ unsigned enabled_at_boot:1;
+ unsigned startup_delay;
+
+ struct gpio *gpios;
+ int nr_gpios;
+
+ struct gpio_regulator_state *states;
+ int nr_states;
+
+ enum regulator_type type;
+ struct regulator_init_data *init_data;
+};
+
+#endif
diff --git a/include/linux/regulator/lp3971.h b/include/linux/regulator/lp3971.h
new file mode 100644
index 000000000..61401649f
--- /dev/null
+++ b/include/linux/regulator/lp3971.h
@@ -0,0 +1,51 @@
+/*
+ * National Semiconductors LP3971 PMIC chip client interface
+ *
+ * Copyright (C) 2009 Samsung Electronics
+ * Author: Marek Szyprowski <m.szyprowski@samsung.com>
+ *
+ * Based on wm8400.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __LINUX_REGULATOR_LP3971_H
+#define __LINUX_REGULATOR_LP3971_H
+
+#include <linux/regulator/machine.h>
+
+#define LP3971_LDO1 0
+#define LP3971_LDO2 1
+#define LP3971_LDO3 2
+#define LP3971_LDO4 3
+#define LP3971_LDO5 4
+
+#define LP3971_DCDC1 5
+#define LP3971_DCDC2 6
+#define LP3971_DCDC3 7
+
+#define LP3971_NUM_REGULATORS 8
+
+struct lp3971_regulator_subdev {
+ int id;
+ struct regulator_init_data *initdata;
+};
+
+struct lp3971_platform_data {
+ int num_regulators;
+ struct lp3971_regulator_subdev *regulators;
+};
+
+#endif
diff --git a/include/linux/regulator/lp3972.h b/include/linux/regulator/lp3972.h
new file mode 100644
index 000000000..9bb7389b7
--- /dev/null
+++ b/include/linux/regulator/lp3972.h
@@ -0,0 +1,48 @@
+/*
+ * National Semiconductors LP3972 PMIC chip client interface
+ *
+ * Based on lp3971.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __LINUX_REGULATOR_LP3972_H
+#define __LINUX_REGULATOR_LP3972_H
+
+#include <linux/regulator/machine.h>
+
+#define LP3972_LDO1 0
+#define LP3972_LDO2 1
+#define LP3972_LDO3 2
+#define LP3972_LDO4 3
+#define LP3972_LDO5 4
+
+#define LP3972_DCDC1 5
+#define LP3972_DCDC2 6
+#define LP3972_DCDC3 7
+
+#define LP3972_NUM_REGULATORS 8
+
+struct lp3972_regulator_subdev {
+ int id;
+ struct regulator_init_data *initdata;
+};
+
+struct lp3972_platform_data {
+ int num_regulators;
+ struct lp3972_regulator_subdev *regulators;
+};
+
+#endif
diff --git a/include/linux/regulator/lp872x.h b/include/linux/regulator/lp872x.h
new file mode 100644
index 000000000..132e05c46
--- /dev/null
+++ b/include/linux/regulator/lp872x.h
@@ -0,0 +1,90 @@
+/*
+ * Copyright 2012 Texas Instruments
+ *
+ * Author: Milo(Woogyom) Kim <milo.kim@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#ifndef __LP872X_REGULATOR_H__
+#define __LP872X_REGULATOR_H__
+
+#include <linux/regulator/machine.h>
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+
+#define LP872X_MAX_REGULATORS 9
+
+enum lp872x_regulator_id {
+ LP8720_ID_BASE,
+ LP8720_ID_LDO1 = LP8720_ID_BASE,
+ LP8720_ID_LDO2,
+ LP8720_ID_LDO3,
+ LP8720_ID_LDO4,
+ LP8720_ID_LDO5,
+ LP8720_ID_BUCK,
+
+ LP8725_ID_BASE,
+ LP8725_ID_LDO1 = LP8725_ID_BASE,
+ LP8725_ID_LDO2,
+ LP8725_ID_LDO3,
+ LP8725_ID_LDO4,
+ LP8725_ID_LDO5,
+ LP8725_ID_LILO1,
+ LP8725_ID_LILO2,
+ LP8725_ID_BUCK1,
+ LP8725_ID_BUCK2,
+
+ LP872X_ID_MAX,
+};
+
+enum lp872x_dvs_state {
+ DVS_LOW = GPIOF_OUT_INIT_LOW,
+ DVS_HIGH = GPIOF_OUT_INIT_HIGH,
+};
+
+enum lp872x_dvs_sel {
+ SEL_V1,
+ SEL_V2,
+};
+
+/**
+ * lp872x_dvs
+ * @gpio : gpio pin number for dvs control
+ * @vsel : dvs selector for buck v1 or buck v2 register
+ * @init_state : initial dvs pin state
+ */
+struct lp872x_dvs {
+ int gpio;
+ enum lp872x_dvs_sel vsel;
+ enum lp872x_dvs_state init_state;
+};
+
+/**
+ * lp872x_regdata
+ * @id : regulator id
+ * @init_data : init data for each regulator
+ */
+struct lp872x_regulator_data {
+ enum lp872x_regulator_id id;
+ struct regulator_init_data *init_data;
+};
+
+/**
+ * lp872x_platform_data
+ * @general_config : the value of LP872X_GENERAL_CFG register
+ * @update_config : if LP872X_GENERAL_CFG register is updated, set true
+ * @regulator_data : platform regulator id and init data
+ * @dvs : dvs data for buck voltage control
+ */
+struct lp872x_platform_data {
+ u8 general_config;
+ bool update_config;
+ struct lp872x_regulator_data regulator_data[LP872X_MAX_REGULATORS];
+ struct lp872x_dvs *dvs;
+};
+
+#endif
diff --git a/include/linux/regulator/machine.h b/include/linux/regulator/machine.h
new file mode 100644
index 000000000..b07562e08
--- /dev/null
+++ b/include/linux/regulator/machine.h
@@ -0,0 +1,212 @@
+/*
+ * machine.h -- SoC Regulator support, machine/board driver API.
+ *
+ * Copyright (C) 2007, 2008 Wolfson Microelectronics PLC.
+ *
+ * Author: Liam Girdwood <lrg@slimlogic.co.uk>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Regulator Machine/Board Interface.
+ */
+
+#ifndef __LINUX_REGULATOR_MACHINE_H_
+#define __LINUX_REGULATOR_MACHINE_H_
+
+#include <linux/regulator/consumer.h>
+#include <linux/suspend.h>
+
+struct regulator;
+
+/*
+ * Regulator operation constraint flags. These flags are used to enable
+ * certain regulator operations and can be OR'ed together.
+ *
+ * VOLTAGE: Regulator output voltage can be changed by software on this
+ * board/machine.
+ * CURRENT: Regulator output current can be changed by software on this
+ * board/machine.
+ * MODE: Regulator operating mode can be changed by software on this
+ * board/machine.
+ * STATUS: Regulator can be enabled and disabled.
+ * DRMS: Dynamic Regulator Mode Switching is enabled for this regulator.
+ * BYPASS: Regulator can be put into bypass mode
+ */
+
+#define REGULATOR_CHANGE_VOLTAGE 0x1
+#define REGULATOR_CHANGE_CURRENT 0x2
+#define REGULATOR_CHANGE_MODE 0x4
+#define REGULATOR_CHANGE_STATUS 0x8
+#define REGULATOR_CHANGE_DRMS 0x10
+#define REGULATOR_CHANGE_BYPASS 0x20
+
+/**
+ * struct regulator_state - regulator state during low power system states
+ *
+ * This describes a regulators state during a system wide low power
+ * state. One of enabled or disabled must be set for the
+ * configuration to be applied.
+ *
+ * @uV: Operating voltage during suspend.
+ * @mode: Operating mode during suspend.
+ * @enabled: Enabled during suspend.
+ * @disabled: Disabled during suspend.
+ */
+struct regulator_state {
+ int uV; /* suspend voltage */
+ unsigned int mode; /* suspend regulator operating mode */
+ int enabled; /* is regulator enabled in this suspend state */
+ int disabled; /* is the regulator disbled in this suspend state */
+};
+
+/**
+ * struct regulation_constraints - regulator operating constraints.
+ *
+ * This struct describes regulator and board/machine specific constraints.
+ *
+ * @name: Descriptive name for the constraints, used for display purposes.
+ *
+ * @min_uV: Smallest voltage consumers may set.
+ * @max_uV: Largest voltage consumers may set.
+ * @uV_offset: Offset applied to voltages from consumer to compensate for
+ * voltage drops.
+ *
+ * @min_uA: Smallest current consumers may set.
+ * @max_uA: Largest current consumers may set.
+ *
+ * @valid_modes_mask: Mask of modes which may be configured by consumers.
+ * @valid_ops_mask: Operations which may be performed by consumers.
+ *
+ * @always_on: Set if the regulator should never be disabled.
+ * @boot_on: Set if the regulator is enabled when the system is initially
+ * started. If the regulator is not enabled by the hardware or
+ * bootloader then it will be enabled when the constraints are
+ * applied.
+ * @apply_uV: Apply the voltage constraint when initialising.
+ * @ramp_disable: Disable ramp delay when initialising or when setting voltage.
+ *
+ * @input_uV: Input voltage for regulator when supplied by another regulator.
+ *
+ * @state_disk: State for regulator when system is suspended in disk mode.
+ * @state_mem: State for regulator when system is suspended in mem mode.
+ * @state_standby: State for regulator when system is suspended in standby
+ * mode.
+ * @initial_state: Suspend state to set by default.
+ * @initial_mode: Mode to set at startup.
+ * @ramp_delay: Time to settle down after voltage change (unit: uV/us)
+ * @enable_time: Turn-on time of the rails (unit: microseconds)
+ */
+struct regulation_constraints {
+
+ const char *name;
+
+ /* voltage output range (inclusive) - for voltage control */
+ int min_uV;
+ int max_uV;
+
+ int uV_offset;
+
+ /* current output range (inclusive) - for current control */
+ int min_uA;
+ int max_uA;
+
+ /* valid regulator operating modes for this machine */
+ unsigned int valid_modes_mask;
+
+ /* valid operations for regulator on this machine */
+ unsigned int valid_ops_mask;
+
+ /* regulator input voltage - only if supply is another regulator */
+ int input_uV;
+
+ /* regulator suspend states for global PMIC STANDBY/HIBERNATE */
+ struct regulator_state state_disk;
+ struct regulator_state state_mem;
+ struct regulator_state state_standby;
+ suspend_state_t initial_state; /* suspend state to set at init */
+
+ /* mode to set on startup */
+ unsigned int initial_mode;
+
+ unsigned int ramp_delay;
+ unsigned int enable_time;
+
+ /* constraint flags */
+ unsigned always_on:1; /* regulator never off when system is on */
+ unsigned boot_on:1; /* bootloader/firmware enabled regulator */
+ unsigned apply_uV:1; /* apply uV constraint if min == max */
+ unsigned ramp_disable:1; /* disable ramp delay */
+};
+
+/**
+ * struct regulator_consumer_supply - supply -> device mapping
+ *
+ * This maps a supply name to a device. Use of dev_name allows support for
+ * buses which make struct device available late such as I2C.
+ *
+ * @dev_name: Result of dev_name() for the consumer.
+ * @supply: Name for the supply.
+ */
+struct regulator_consumer_supply {
+ const char *dev_name; /* dev_name() for consumer */
+ const char *supply; /* consumer supply - e.g. "vcc" */
+};
+
+/* Initialize struct regulator_consumer_supply */
+#define REGULATOR_SUPPLY(_name, _dev_name) \
+{ \
+ .supply = _name, \
+ .dev_name = _dev_name, \
+}
+
+/**
+ * struct regulator_init_data - regulator platform initialisation data.
+ *
+ * Initialisation constraints, our supply and consumers supplies.
+ *
+ * @supply_regulator: Parent regulator. Specified using the regulator name
+ * as it appears in the name field in sysfs, which can
+ * be explicitly set using the constraints field 'name'.
+ *
+ * @constraints: Constraints. These must be specified for the regulator to
+ * be usable.
+ * @num_consumer_supplies: Number of consumer device supplies.
+ * @consumer_supplies: Consumer device supply configuration.
+ *
+ * @regulator_init: Callback invoked when the regulator has been registered.
+ * @driver_data: Data passed to regulator_init.
+ */
+struct regulator_init_data {
+ const char *supply_regulator; /* or NULL for system supply */
+
+ struct regulation_constraints constraints;
+
+ int num_consumer_supplies;
+ struct regulator_consumer_supply *consumer_supplies;
+
+ /* optional regulator machine specific init */
+ int (*regulator_init)(void *driver_data);
+ void *driver_data; /* core does not touch this */
+};
+
+#ifdef CONFIG_REGULATOR
+void regulator_has_full_constraints(void);
+int regulator_suspend_prepare(suspend_state_t state);
+int regulator_suspend_finish(void);
+#else
+static inline void regulator_has_full_constraints(void)
+{
+}
+static inline int regulator_suspend_prepare(suspend_state_t state)
+{
+ return 0;
+}
+static inline int regulator_suspend_finish(void)
+{
+ return 0;
+}
+#endif
+
+#endif
diff --git a/include/linux/regulator/max1586.h b/include/linux/regulator/max1586.h
new file mode 100644
index 000000000..cedd0febe
--- /dev/null
+++ b/include/linux/regulator/max1586.h
@@ -0,0 +1,63 @@
+/*
+ * max1586.h -- Voltage regulation for the Maxim 1586
+ *
+ * Copyright (C) 2008 Robert Jarzmik
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#ifndef REGULATOR_MAX1586
+#define REGULATOR_MAX1586
+
+#include <linux/regulator/machine.h>
+
+#define MAX1586_V3 0
+#define MAX1586_V6 1
+
+/* precalculated values for v3_gain */
+#define MAX1586_GAIN_NO_R24 1000000 /* 700000 .. 1475000 mV */
+#define MAX1586_GAIN_R24_3k32 1051098 /* 735768 .. 1550369 mV */
+#define MAX1586_GAIN_R24_5k11 1078648 /* 755053 .. 1591005 mV */
+#define MAX1586_GAIN_R24_7k5 1115432 /* 780802 .. 1645262 mV */
+
+/**
+ * max1586_subdev_data - regulator data
+ * @id: regulator Id (either MAX1586_V3 or MAX1586_V6)
+ * @name: regulator cute name (example for V3: "vcc_core")
+ * @platform_data: regulator init data (constraints, supplies, ...)
+ */
+struct max1586_subdev_data {
+ int id;
+ const char *name;
+ struct regulator_init_data *platform_data;
+};
+
+/**
+ * max1586_platform_data - platform data for max1586
+ * @num_subdevs: number of regulators used (may be 1 or 2)
+ * @subdevs: regulator used
+ * At most, there will be a regulator for V3 and one for V6 voltages.
+ * @v3_gain: gain on the V3 voltage output multiplied by 1e6.
+ * This can be calculated as ((1 + R24/R25 + R24/185.5kOhm) * 1e6)
+ * for an external resistor configuration as described in the
+ * data sheet (R25=100kOhm).
+ */
+struct max1586_platform_data {
+ int num_subdevs;
+ struct max1586_subdev_data *subdevs;
+ int v3_gain;
+};
+
+#endif
diff --git a/include/linux/regulator/max8649.h b/include/linux/regulator/max8649.h
new file mode 100644
index 000000000..417d14ecd
--- /dev/null
+++ b/include/linux/regulator/max8649.h
@@ -0,0 +1,44 @@
+/*
+ * Interface of Maxim max8649
+ *
+ * Copyright (C) 2009-2010 Marvell International Ltd.
+ * Haojian Zhuang <haojian.zhuang@marvell.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __LINUX_REGULATOR_MAX8649_H
+#define __LINUX_REGULATOR_MAX8649_H
+
+#include <linux/regulator/machine.h>
+
+enum {
+ MAX8649_EXTCLK_26MHZ = 0,
+ MAX8649_EXTCLK_13MHZ,
+ MAX8649_EXTCLK_19MHZ, /* 19.2MHz */
+};
+
+enum {
+ MAX8649_RAMP_32MV = 0,
+ MAX8649_RAMP_16MV,
+ MAX8649_RAMP_8MV,
+ MAX8649_RAMP_4MV,
+ MAX8649_RAMP_2MV,
+ MAX8649_RAMP_1MV,
+ MAX8649_RAMP_0_5MV,
+ MAX8649_RAMP_0_25MV,
+};
+
+struct max8649_platform_data {
+ struct regulator_init_data *regulator;
+
+ unsigned mode:2; /* bit[1:0] = VID1,VID0 */
+ unsigned extclk_freq:2;
+ unsigned extclk:1;
+ unsigned ramp_timing:3;
+ unsigned ramp_down:1;
+};
+
+#endif /* __LINUX_REGULATOR_MAX8649_H */
diff --git a/include/linux/regulator/max8660.h b/include/linux/regulator/max8660.h
new file mode 100644
index 000000000..f8a6a4844
--- /dev/null
+++ b/include/linux/regulator/max8660.h
@@ -0,0 +1,57 @@
+/*
+ * max8660.h -- Voltage regulation for the Maxim 8660/8661
+ *
+ * Copyright (C) 2009 Wolfram Sang, Pengutronix e.K.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#ifndef __LINUX_REGULATOR_MAX8660_H
+#define __LINUX_REGULATOR_MAX8660_H
+
+#include <linux/regulator/machine.h>
+
+enum {
+ MAX8660_V3,
+ MAX8660_V4,
+ MAX8660_V5,
+ MAX8660_V6,
+ MAX8660_V7,
+ MAX8660_V_END,
+};
+
+/**
+ * max8660_subdev_data - regulator subdev data
+ * @id: regulator id
+ * @name: regulator name
+ * @platform_data: regulator init data
+ */
+struct max8660_subdev_data {
+ int id;
+ const char *name;
+ struct regulator_init_data *platform_data;
+};
+
+/**
+ * max8660_platform_data - platform data for max8660
+ * @num_subdevs: number of regulators used
+ * @subdevs: pointer to regulators used
+ * @en34_is_high: if EN34 is driven high, regulators cannot be en-/disabled.
+ */
+struct max8660_platform_data {
+ int num_subdevs;
+ struct max8660_subdev_data *subdevs;
+ unsigned en34_is_high:1;
+};
+#endif
diff --git a/include/linux/regulator/max8952.h b/include/linux/regulator/max8952.h
new file mode 100644
index 000000000..4dbb63a1d
--- /dev/null
+++ b/include/linux/regulator/max8952.h
@@ -0,0 +1,135 @@
+/*
+ * max8952.h - Voltage regulation for the Maxim 8952
+ *
+ * Copyright (C) 2010 Samsung Electrnoics
+ * MyungJoo Ham <myungjoo.ham@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#ifndef REGULATOR_MAX8952
+#define REGULATOR_MAX8952
+
+#include <linux/regulator/machine.h>
+
+enum {
+ MAX8952_DVS_MODE0,
+ MAX8952_DVS_MODE1,
+ MAX8952_DVS_MODE2,
+ MAX8952_DVS_MODE3,
+};
+
+enum {
+ MAX8952_DVS_770mV = 0,
+ MAX8952_DVS_780mV,
+ MAX8952_DVS_790mV,
+ MAX8952_DVS_800mV,
+ MAX8952_DVS_810mV,
+ MAX8952_DVS_820mV,
+ MAX8952_DVS_830mV,
+ MAX8952_DVS_840mV,
+ MAX8952_DVS_850mV,
+ MAX8952_DVS_860mV,
+ MAX8952_DVS_870mV,
+ MAX8952_DVS_880mV,
+ MAX8952_DVS_890mV,
+ MAX8952_DVS_900mV,
+ MAX8952_DVS_910mV,
+ MAX8952_DVS_920mV,
+ MAX8952_DVS_930mV,
+ MAX8952_DVS_940mV,
+ MAX8952_DVS_950mV,
+ MAX8952_DVS_960mV,
+ MAX8952_DVS_970mV,
+ MAX8952_DVS_980mV,
+ MAX8952_DVS_990mV,
+ MAX8952_DVS_1000mV,
+ MAX8952_DVS_1010mV,
+ MAX8952_DVS_1020mV,
+ MAX8952_DVS_1030mV,
+ MAX8952_DVS_1040mV,
+ MAX8952_DVS_1050mV,
+ MAX8952_DVS_1060mV,
+ MAX8952_DVS_1070mV,
+ MAX8952_DVS_1080mV,
+ MAX8952_DVS_1090mV,
+ MAX8952_DVS_1100mV,
+ MAX8952_DVS_1110mV,
+ MAX8952_DVS_1120mV,
+ MAX8952_DVS_1130mV,
+ MAX8952_DVS_1140mV,
+ MAX8952_DVS_1150mV,
+ MAX8952_DVS_1160mV,
+ MAX8952_DVS_1170mV,
+ MAX8952_DVS_1180mV,
+ MAX8952_DVS_1190mV,
+ MAX8952_DVS_1200mV,
+ MAX8952_DVS_1210mV,
+ MAX8952_DVS_1220mV,
+ MAX8952_DVS_1230mV,
+ MAX8952_DVS_1240mV,
+ MAX8952_DVS_1250mV,
+ MAX8952_DVS_1260mV,
+ MAX8952_DVS_1270mV,
+ MAX8952_DVS_1280mV,
+ MAX8952_DVS_1290mV,
+ MAX8952_DVS_1300mV,
+ MAX8952_DVS_1310mV,
+ MAX8952_DVS_1320mV,
+ MAX8952_DVS_1330mV,
+ MAX8952_DVS_1340mV,
+ MAX8952_DVS_1350mV,
+ MAX8952_DVS_1360mV,
+ MAX8952_DVS_1370mV,
+ MAX8952_DVS_1380mV,
+ MAX8952_DVS_1390mV,
+ MAX8952_DVS_1400mV,
+};
+
+enum {
+ MAX8952_SYNC_FREQ_26MHZ, /* Default */
+ MAX8952_SYNC_FREQ_13MHZ,
+ MAX8952_SYNC_FREQ_19_2MHZ,
+};
+
+enum {
+ MAX8952_RAMP_32mV_us = 0, /* Default */
+ MAX8952_RAMP_16mV_us,
+ MAX8952_RAMP_8mV_us,
+ MAX8952_RAMP_4mV_us,
+ MAX8952_RAMP_2mV_us,
+ MAX8952_RAMP_1mV_us,
+ MAX8952_RAMP_0_5mV_us,
+ MAX8952_RAMP_0_25mV_us,
+};
+
+#define MAX8952_NUM_DVS_MODE 4
+
+struct max8952_platform_data {
+ int gpio_vid0;
+ int gpio_vid1;
+ int gpio_en;
+
+ u32 default_mode;
+ u32 dvs_mode[MAX8952_NUM_DVS_MODE]; /* MAX8952_DVS_MODEx_XXXXmV */
+
+ u32 sync_freq;
+ u32 ramp_speed;
+
+ struct regulator_init_data *reg_data;
+};
+
+
+#endif /* REGULATOR_MAX8952 */
diff --git a/include/linux/regulator/max8973-regulator.h b/include/linux/regulator/max8973-regulator.h
new file mode 100644
index 000000000..f8acc052e
--- /dev/null
+++ b/include/linux/regulator/max8973-regulator.h
@@ -0,0 +1,72 @@
+/*
+ * max8973-regulator.h -- MAXIM 8973 regulator
+ *
+ * Interface for regulator driver for MAXIM 8973 DC-DC step-down
+ * switching regulator.
+ *
+ * Copyright (C) 2012 NVIDIA Corporation
+
+ * Author: Laxman Dewangan <ldewangan@nvidia.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+ *
+ */
+
+#ifndef __LINUX_REGULATOR_MAX8973_H
+#define __LINUX_REGULATOR_MAX8973_H
+
+/*
+ * Control flags for configuration of the device.
+ * Client need to pass this information with ORed
+ */
+#define MAX8973_CONTROL_REMOTE_SENSE_ENABLE 0x00000001
+#define MAX8973_CONTROL_FALLING_SLEW_RATE_ENABLE 0x00000002
+#define MAX8973_CONTROL_OUTPUT_ACTIVE_DISCH_ENABLE 0x00000004
+#define MAX8973_CONTROL_BIAS_ENABLE 0x00000008
+#define MAX8973_CONTROL_PULL_DOWN_ENABLE 0x00000010
+#define MAX8973_CONTROL_FREQ_SHIFT_9PER_ENABLE 0x00000020
+
+#define MAX8973_CONTROL_CLKADV_TRIP_DISABLED 0x00000000
+#define MAX8973_CONTROL_CLKADV_TRIP_75mV_PER_US 0x00010000
+#define MAX8973_CONTROL_CLKADV_TRIP_150mV_PER_US 0x00020000
+#define MAX8973_CONTROL_CLKADV_TRIP_75mV_PER_US_HIST_DIS 0x00030000
+
+#define MAX8973_CONTROL_INDUCTOR_VALUE_NOMINAL 0x00000000
+#define MAX8973_CONTROL_INDUCTOR_VALUE_MINUS_30_PER 0x00100000
+#define MAX8973_CONTROL_INDUCTOR_VALUE_PLUS_30_PER 0x00200000
+#define MAX8973_CONTROL_INDUCTOR_VALUE_PLUS_60_PER 0x00300000
+
+/*
+ * struct max8973_regulator_platform_data - max8973 regulator platform data.
+ *
+ * @reg_init_data: The regulator init data.
+ * @control_flags: Control flags which are ORed value of above flags to
+ * configure device.
+ * @enable_ext_control: Enable the voltage enable/disable through external
+ * control signal from EN input pin. If it is false then
+ * voltage output will be enabled/disabled through EN bit of
+ * device register.
+ * @dvs_gpio: GPIO for dvs. It should be -1 if this is tied with fixed logic.
+ * @dvs_def_state: Default state of dvs. 1 if it is high else 0.
+ */
+struct max8973_regulator_platform_data {
+ struct regulator_init_data *reg_init_data;
+ unsigned long control_flags;
+ bool enable_ext_control;
+ int dvs_gpio;
+ unsigned dvs_def_state:1;
+};
+
+#endif /* __LINUX_REGULATOR_MAX8973_H */
diff --git a/include/linux/regulator/mt6397-regulator.h b/include/linux/regulator/mt6397-regulator.h
new file mode 100644
index 000000000..30cc5963e
--- /dev/null
+++ b/include/linux/regulator/mt6397-regulator.h
@@ -0,0 +1,49 @@
+/*
+ * Copyright (c) 2014 MediaTek Inc.
+ * Author: Flora Fu <flora.fu@mediatek.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __LINUX_REGULATOR_MT6397_H
+#define __LINUX_REGULATOR_MT6397_H
+
+enum {
+ MT6397_ID_VPCA15 = 0,
+ MT6397_ID_VPCA7,
+ MT6397_ID_VSRAMCA15,
+ MT6397_ID_VSRAMCA7,
+ MT6397_ID_VCORE,
+ MT6397_ID_VGPU,
+ MT6397_ID_VDRM,
+ MT6397_ID_VIO18 = 7,
+ MT6397_ID_VTCXO,
+ MT6397_ID_VA28,
+ MT6397_ID_VCAMA,
+ MT6397_ID_VIO28,
+ MT6397_ID_VUSB,
+ MT6397_ID_VMC,
+ MT6397_ID_VMCH,
+ MT6397_ID_VEMC3V3,
+ MT6397_ID_VGP1,
+ MT6397_ID_VGP2,
+ MT6397_ID_VGP3,
+ MT6397_ID_VGP4,
+ MT6397_ID_VGP5,
+ MT6397_ID_VGP6,
+ MT6397_ID_VIBR,
+ MT6397_ID_RG_MAX,
+};
+
+#define MT6397_MAX_REGULATOR MT6397_ID_RG_MAX
+#define MT6397_REGULATOR_ID97 0x97
+#define MT6397_REGULATOR_ID91 0x91
+
+#endif /* __LINUX_REGULATOR_MT6397_H */
diff --git a/include/linux/regulator/of_regulator.h b/include/linux/regulator/of_regulator.h
new file mode 100644
index 000000000..763953f7e
--- /dev/null
+++ b/include/linux/regulator/of_regulator.h
@@ -0,0 +1,45 @@
+/*
+ * OpenFirmware regulator support routines
+ *
+ */
+
+#ifndef __LINUX_OF_REG_H
+#define __LINUX_OF_REG_H
+
+struct regulator_desc;
+
+struct of_regulator_match {
+ const char *name;
+ void *driver_data;
+ struct regulator_init_data *init_data;
+ struct device_node *of_node;
+ const struct regulator_desc *desc;
+};
+
+#if defined(CONFIG_OF)
+extern struct regulator_init_data
+ *of_get_regulator_init_data(struct device *dev,
+ struct device_node *node,
+ const struct regulator_desc *desc);
+extern int of_regulator_match(struct device *dev, struct device_node *node,
+ struct of_regulator_match *matches,
+ unsigned int num_matches);
+#else
+static inline struct regulator_init_data
+ *of_get_regulator_init_data(struct device *dev,
+ struct device_node *node,
+ const struct regulator_desc *desc)
+{
+ return NULL;
+}
+
+static inline int of_regulator_match(struct device *dev,
+ struct device_node *node,
+ struct of_regulator_match *matches,
+ unsigned int num_matches)
+{
+ return 0;
+}
+#endif /* CONFIG_OF */
+
+#endif /* __LINUX_OF_REG_H */
diff --git a/include/linux/regulator/pfuze100.h b/include/linux/regulator/pfuze100.h
new file mode 100644
index 000000000..70c6c66c5
--- /dev/null
+++ b/include/linux/regulator/pfuze100.h
@@ -0,0 +1,72 @@
+/*
+ * Copyright (C) 2011-2013 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ */
+#ifndef __LINUX_REG_PFUZE100_H
+#define __LINUX_REG_PFUZE100_H
+
+#define PFUZE100_SW1AB 0
+#define PFUZE100_SW1C 1
+#define PFUZE100_SW2 2
+#define PFUZE100_SW3A 3
+#define PFUZE100_SW3B 4
+#define PFUZE100_SW4 5
+#define PFUZE100_SWBST 6
+#define PFUZE100_VSNVS 7
+#define PFUZE100_VREFDDR 8
+#define PFUZE100_VGEN1 9
+#define PFUZE100_VGEN2 10
+#define PFUZE100_VGEN3 11
+#define PFUZE100_VGEN4 12
+#define PFUZE100_VGEN5 13
+#define PFUZE100_VGEN6 14
+#define PFUZE100_MAX_REGULATOR 15
+
+#define PFUZE200_SW1AB 0
+#define PFUZE200_SW2 1
+#define PFUZE200_SW3A 2
+#define PFUZE200_SW3B 3
+#define PFUZE200_SWBST 4
+#define PFUZE200_VSNVS 5
+#define PFUZE200_VREFDDR 6
+#define PFUZE200_VGEN1 7
+#define PFUZE200_VGEN2 8
+#define PFUZE200_VGEN3 9
+#define PFUZE200_VGEN4 10
+#define PFUZE200_VGEN5 11
+#define PFUZE200_VGEN6 12
+
+#define PFUZE3000_SW1A 0
+#define PFUZE3000_SW1B 1
+#define PFUZE3000_SW2 2
+#define PFUZE3000_SW3 3
+#define PFUZE3000_SWBST 4
+#define PFUZE3000_VSNVS 5
+#define PFUZE3000_VREFDDR 6
+#define PFUZE3000_VLDO1 7
+#define PFUZE3000_VLDO2 8
+#define PFUZE3000_VCCSD 9
+#define PFUZE3000_V33 10
+#define PFUZE3000_VLDO3 11
+#define PFUZE3000_VLDO4 12
+
+struct regulator_init_data;
+
+struct pfuze_regulator_platform_data {
+ struct regulator_init_data *init_data[PFUZE100_MAX_REGULATOR];
+};
+
+#endif /* __LINUX_REG_PFUZE100_H */
diff --git a/include/linux/regulator/tps51632-regulator.h b/include/linux/regulator/tps51632-regulator.h
new file mode 100644
index 000000000..d00841e1a
--- /dev/null
+++ b/include/linux/regulator/tps51632-regulator.h
@@ -0,0 +1,47 @@
+/*
+ * tps51632-regulator.h -- TPS51632 regulator
+ *
+ * Interface for regulator driver for TPS51632 3-2-1 Phase D-Cap Step Down
+ * Driverless Controller with serial VID control and DVFS.
+ *
+ * Copyright (C) 2012 NVIDIA Corporation
+
+ * Author: Laxman Dewangan <ldewangan@nvidia.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+ *
+ */
+
+#ifndef __LINUX_REGULATOR_TPS51632_H
+#define __LINUX_REGULATOR_TPS51632_H
+
+/*
+ * struct tps51632_regulator_platform_data - tps51632 regulator platform data.
+ *
+ * @reg_init_data: The regulator init data.
+ * @enable_pwm_dvfs: Enable PWM DVFS or not.
+ * @dvfs_step_20mV: Step for DVFS is 20mV or 10mV.
+ * @max_voltage_uV: Maximum possible voltage in PWM-DVFS mode.
+ * @base_voltage_uV: Base voltage when PWM-DVFS enabled.
+ */
+struct tps51632_regulator_platform_data {
+ struct regulator_init_data *reg_init_data;
+ bool enable_pwm_dvfs;
+ bool dvfs_step_20mV;
+ int max_voltage_uV;
+ int base_voltage_uV;
+};
+
+#endif /* __LINUX_REGULATOR_TPS51632_H */
diff --git a/include/linux/regulator/tps62360.h b/include/linux/regulator/tps62360.h
new file mode 100644
index 000000000..a4c49394c
--- /dev/null
+++ b/include/linux/regulator/tps62360.h
@@ -0,0 +1,53 @@
+/*
+ * tps62360.h -- TI tps62360
+ *
+ * Interface for regulator driver for TI TPS62360 Processor core supply
+ *
+ * Copyright (C) 2012 NVIDIA Corporation
+
+ * Author: Laxman Dewangan <ldewangan@nvidia.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+ *
+ */
+
+#ifndef __LINUX_REGULATOR_TPS62360_H
+#define __LINUX_REGULATOR_TPS62360_H
+
+/*
+ * struct tps62360_regulator_platform_data - tps62360 regulator platform data.
+ *
+ * @reg_init_data: The regulator init data.
+ * @en_discharge: Enable discharge the output capacitor via internal
+ * register.
+ * @en_internal_pulldn: internal pull down enable or not.
+ * @vsel0_gpio: Gpio number for vsel0. It should be -1 if this is tied with
+ * fixed logic.
+ * @vsel1_gpio: Gpio number for vsel1. It should be -1 if this is tied with
+ * fixed logic.
+ * @vsel0_def_state: Default state of vsel0. 1 if it is high else 0.
+ * @vsel1_def_state: Default state of vsel1. 1 if it is high else 0.
+ */
+struct tps62360_regulator_platform_data {
+ struct regulator_init_data *reg_init_data;
+ bool en_discharge;
+ bool en_internal_pulldn;
+ int vsel0_gpio;
+ int vsel1_gpio;
+ int vsel0_def_state;
+ int vsel1_def_state;
+};
+
+#endif /* __LINUX_REGULATOR_TPS62360_H */
diff --git a/include/linux/regulator/tps6507x.h b/include/linux/regulator/tps6507x.h
new file mode 100644
index 000000000..4892f591b
--- /dev/null
+++ b/include/linux/regulator/tps6507x.h
@@ -0,0 +1,32 @@
+/*
+ * tps6507x.h -- Voltage regulation for the Texas Instruments TPS6507X
+ *
+ * Copyright (C) 2010 Texas Instruments, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#ifndef REGULATOR_TPS6507X
+#define REGULATOR_TPS6507X
+
+/**
+ * tps6507x_reg_platform_data - platform data for tps6507x
+ * @defdcdc_default: Defines whether DCDC high or the low register controls
+ * output voltage by default. Valid for DCDC2 and DCDC3 outputs only.
+ */
+struct tps6507x_reg_platform_data {
+ bool defdcdc_default;
+};
+
+#endif
diff --git a/include/linux/regulator/userspace-consumer.h b/include/linux/regulator/userspace-consumer.h
new file mode 100644
index 000000000..b4554ce9d
--- /dev/null
+++ b/include/linux/regulator/userspace-consumer.h
@@ -0,0 +1,25 @@
+#ifndef __REGULATOR_PLATFORM_CONSUMER_H_
+#define __REGULATOR_PLATFORM_CONSUMER_H_
+
+struct regulator_consumer_supply;
+
+/**
+ * struct regulator_userspace_consumer_data - line consumer
+ * initialisation data.
+ *
+ * @name: Name for the consumer line
+ * @num_supplies: Number of supplies feeding the line
+ * @supplies: Supplies configuration.
+ * @init_on: Set if the regulators supplying the line should be
+ * enabled during initialisation
+ */
+struct regulator_userspace_consumer_data {
+ const char *name;
+
+ int num_supplies;
+ struct regulator_bulk_data *supplies;
+
+ bool init_on;
+};
+
+#endif /* __REGULATOR_PLATFORM_CONSUMER_H_ */