diff options
Diffstat (limited to 'include/linux/regulator')
| -rw-r--r-- | include/linux/regulator/act8865.h | 2 | ||||
| -rw-r--r-- | include/linux/regulator/driver.h | 7 | ||||
| -rw-r--r-- | include/linux/regulator/machine.h | 1 | ||||
| -rw-r--r-- | include/linux/regulator/max8973-regulator.h | 5 |
4 files changed, 14 insertions, 1 deletions
diff --git a/include/linux/regulator/act8865.h b/include/linux/regulator/act8865.h index 2eb386017..113d861a1 100644 --- a/include/linux/regulator/act8865.h +++ b/include/linux/regulator/act8865.h @@ -69,11 +69,13 @@ enum { * @id: regulator id * @name: regulator name * @init_data: regulator init data + * @of_node: device tree node (optional) */ struct act8865_regulator_data { int id; const char *name; struct regulator_init_data *init_data; + struct device_node *of_node; }; /** diff --git a/include/linux/regulator/driver.h b/include/linux/regulator/driver.h index cd271e89a..fcfa40a66 100644 --- a/include/linux/regulator/driver.h +++ b/include/linux/regulator/driver.h @@ -93,6 +93,9 @@ struct regulator_linear_range { * @get_current_limit: Get the configured limit for a current-limited regulator. * @set_input_current_limit: Configure an input limit. * + * @set_over_current_protection: Support capability of automatically shutting + * down when detecting an over current event. + * * @set_active_discharge: Set active discharge enable/disable of regulators. * * @set_mode: Set the configured operating mode for the regulator. @@ -255,6 +258,8 @@ enum regulator_type { * * @vsel_reg: Register for selector when using regulator_regmap_X_voltage_ * @vsel_mask: Mask for register bitfield used for selector + * @csel_reg: Register for TPS65218 LS3 current regulator + * @csel_mask: Mask for TPS65218 LS3 current regulator * @apply_reg: Register for initiate voltage change on the output when * using regulator_set_voltage_sel_regmap * @apply_bit: Register bitfield used for initiate voltage change on the @@ -292,7 +297,7 @@ struct regulator_desc { const struct regulator_desc *, struct regulator_config *); int id; - bool continuous_voltage_range; + unsigned int continuous_voltage_range:1; unsigned n_voltages; const struct regulator_ops *ops; int irq; diff --git a/include/linux/regulator/machine.h b/include/linux/regulator/machine.h index 5d627c83a..ad3e5158e 100644 --- a/include/linux/regulator/machine.h +++ b/include/linux/regulator/machine.h @@ -97,6 +97,7 @@ struct regulator_state { * @ramp_disable: Disable ramp delay when initialising or when setting voltage. * @soft_start: Enable soft start so that voltage ramps slowly. * @pull_down: Enable pull down when regulator is disabled. + * @over_current_protection: Auto disable on over current event. * * @input_uV: Input voltage for regulator when supplied by another regulator. * diff --git a/include/linux/regulator/max8973-regulator.h b/include/linux/regulator/max8973-regulator.h index f6a8a16a0..2fcb99802 100644 --- a/include/linux/regulator/max8973-regulator.h +++ b/include/linux/regulator/max8973-regulator.h @@ -54,6 +54,10 @@ * @reg_init_data: The regulator init data. * @control_flags: Control flags which are ORed value of above flags to * configure device. + * @junction_temp_warning: Junction temp in millicelcius on which warning need + * to be set. Thermal functionality is only supported on + * MAX77621. The threshold warning supported by MAX77621 + * are 120C and 140C. * @enable_ext_control: Enable the voltage enable/disable through external * control signal from EN input pin. If it is false then * voltage output will be enabled/disabled through EN bit of @@ -67,6 +71,7 @@ struct max8973_regulator_platform_data { struct regulator_init_data *reg_init_data; unsigned long control_flags; + unsigned long junction_temp_warning; bool enable_ext_control; int enable_gpio; int dvs_gpio; |