diff options
Diffstat (limited to 'include/linux/serial_sci.h')
| -rw-r--r-- | include/linux/serial_sci.h | 86 |
1 files changed, 11 insertions, 75 deletions
diff --git a/include/linux/serial_sci.h b/include/linux/serial_sci.h index 6c5e3bb28..7c536ac5b 100644 --- a/include/linux/serial_sci.h +++ b/include/linux/serial_sci.h @@ -1,6 +1,7 @@ #ifndef __LINUX_SERIAL_SCI_H #define __LINUX_SERIAL_SCI_H +#include <linux/bitops.h> #include <linux/serial_core.h> #include <linux/sh_dma.h> @@ -10,59 +11,16 @@ #define SCIx_NOT_SUPPORTED (-1) -/* SCSMR (Serial Mode Register) */ -#define SCSMR_CHR (1 << 6) /* 7-bit Character Length */ -#define SCSMR_PE (1 << 5) /* Parity Enable */ -#define SCSMR_ODD (1 << 4) /* Odd Parity */ -#define SCSMR_STOP (1 << 3) /* Stop Bit Length */ -#define SCSMR_CKS 0x0003 /* Clock Select */ - /* Serial Control Register (@ = not supported by all parts) */ -#define SCSCR_TIE (1 << 7) /* Transmit Interrupt Enable */ -#define SCSCR_RIE (1 << 6) /* Receive Interrupt Enable */ -#define SCSCR_TE (1 << 5) /* Transmit Enable */ -#define SCSCR_RE (1 << 4) /* Receive Enable */ -#define SCSCR_REIE (1 << 3) /* Receive Error Interrupt Enable @ */ -#define SCSCR_TOIE (1 << 2) /* Timeout Interrupt Enable @ */ -#define SCSCR_CKE1 (1 << 1) /* Clock Enable 1 */ -#define SCSCR_CKE0 (1 << 0) /* Clock Enable 0 */ -/* SCIFA/SCIFB only */ -#define SCSCR_TDRQE (1 << 15) /* Tx Data Transfer Request Enable */ -#define SCSCR_RDRQE (1 << 14) /* Rx Data Transfer Request Enable */ - -/* SCxSR (Serial Status Register) on SCI */ -#define SCI_TDRE 0x80 /* Transmit Data Register Empty */ -#define SCI_RDRF 0x40 /* Receive Data Register Full */ -#define SCI_ORER 0x20 /* Overrun Error */ -#define SCI_FER 0x10 /* Framing Error */ -#define SCI_PER 0x08 /* Parity Error */ -#define SCI_TEND 0x04 /* Transmit End */ - -#define SCI_DEFAULT_ERROR_MASK (SCI_PER | SCI_FER) - -/* SCxSR (Serial Status Register) on SCIF, HSCIF */ -#define SCIF_ER 0x0080 /* Receive Error */ -#define SCIF_TEND 0x0040 /* Transmission End */ -#define SCIF_TDFE 0x0020 /* Transmit FIFO Data Empty */ -#define SCIF_BRK 0x0010 /* Break Detect */ -#define SCIF_FER 0x0008 /* Framing Error */ -#define SCIF_PER 0x0004 /* Parity Error */ -#define SCIF_RDF 0x0002 /* Receive FIFO Data Full */ -#define SCIF_DR 0x0001 /* Receive Data Ready */ - -#define SCIF_DEFAULT_ERROR_MASK (SCIF_PER | SCIF_FER | SCIF_ER | SCIF_BRK) - -/* SCFCR (FIFO Control Register) */ -#define SCFCR_LOOP (1 << 0) /* Loopback Test */ - -/* SCSPTR (Serial Port Register), optional */ -#define SCSPTR_RTSIO (1 << 7) /* Serial Port RTS Pin Input/Output */ -#define SCSPTR_CTSIO (1 << 5) /* Serial Port CTS Pin Input/Output */ -#define SCSPTR_SPB2IO (1 << 1) /* Serial Port Break Input/Output */ -#define SCSPTR_SPB2DT (1 << 0) /* Serial Port Break Data */ - -/* HSSRR HSCIF */ -#define HSCIF_SRE 0x8000 /* Sampling Rate Register Enable */ +#define SCSCR_TIE BIT(7) /* Transmit Interrupt Enable */ +#define SCSCR_RIE BIT(6) /* Receive Interrupt Enable */ +#define SCSCR_TE BIT(5) /* Transmit Enable */ +#define SCSCR_RE BIT(4) /* Receive Enable */ +#define SCSCR_REIE BIT(3) /* Receive Error Interrupt Enable @ */ +#define SCSCR_TOIE BIT(2) /* Timeout Interrupt Enable @ */ +#define SCSCR_CKE1 BIT(1) /* Clock Enable 1 */ +#define SCSCR_CKE0 BIT(0) /* Clock Enable 0 */ + enum { SCIx_PROBE_REGTYPE, @@ -82,28 +40,6 @@ enum { SCIx_NR_REGTYPES, }; -/* - * SCI register subset common for all port types. - * Not all registers will exist on all parts. - */ -enum { - SCSMR, /* Serial Mode Register */ - SCBRR, /* Bit Rate Register */ - SCSCR, /* Serial Control Register */ - SCxSR, /* Serial Status Register */ - SCFCR, /* FIFO Control Register */ - SCFDR, /* FIFO Data Count Register */ - SCxTDR, /* Transmit (FIFO) Data Register */ - SCxRDR, /* Receive (FIFO) Data Register */ - SCLSR, /* Line Status Register */ - SCTFDR, /* Transmit FIFO Data Count Register */ - SCRFDR, /* Receive FIFO Data Count Register */ - SCSPTR, /* Serial Port Register */ - HSSRR, /* Sampling Rate Register */ - - SCIx_NR_REGS, -}; - struct device; struct plat_sci_port_ops { @@ -113,7 +49,7 @@ struct plat_sci_port_ops { /* * Port-specific capabilities */ -#define SCIx_HAVE_RTSCTS (1 << 0) +#define SCIx_HAVE_RTSCTS BIT(0) /* * Platform device specific platform_data struct |