diff options
Diffstat (limited to 'include/linux/usb/wusb-wa.h')
| -rw-r--r-- | include/linux/usb/wusb-wa.h | 303 |
1 files changed, 303 insertions, 0 deletions
diff --git a/include/linux/usb/wusb-wa.h b/include/linux/usb/wusb-wa.h new file mode 100644 index 000000000..c12571307 --- /dev/null +++ b/include/linux/usb/wusb-wa.h @@ -0,0 +1,303 @@ +/* + * Wireless USB Wire Adapter constants and structures. + * + * Copyright (C) 2005-2006 Intel Corporation. + * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License version + * 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA + * 02110-1301, USA. + * + * + * FIXME: docs + * FIXME: organize properly, group logically + * + * All the event structures are defined in uwb/spec.h, as they are + * common to the WHCI and WUSB radio control interfaces. + * + * References: + * [WUSB] Wireless Universal Serial Bus Specification, revision 1.0, ch8 + */ +#ifndef __LINUX_USB_WUSB_WA_H +#define __LINUX_USB_WUSB_WA_H + +/** + * Radio Command Request for the Radio Control Interface + * + * Radio Control Interface command and event codes are the same as + * WHCI, and listed in include/linux/uwb.h:UWB_RC_{CMD,EVT}_* + */ +enum { + WA_EXEC_RC_CMD = 40, /* Radio Control command Request */ +}; + +/* Wireless Adapter Requests ([WUSB] table 8-51) */ +enum { + WUSB_REQ_ADD_MMC_IE = 20, + WUSB_REQ_REMOVE_MMC_IE = 21, + WUSB_REQ_SET_NUM_DNTS = 22, + WUSB_REQ_SET_CLUSTER_ID = 23, + WUSB_REQ_SET_DEV_INFO = 24, + WUSB_REQ_GET_TIME = 25, + WUSB_REQ_SET_STREAM_IDX = 26, + WUSB_REQ_SET_WUSB_MAS = 27, + WUSB_REQ_CHAN_STOP = 28, +}; + + +/* Wireless Adapter WUSB Channel Time types ([WUSB] table 8-52) */ +enum { + WUSB_TIME_ADJ = 0, + WUSB_TIME_BPST = 1, + WUSB_TIME_WUSB = 2, +}; + +enum { + WA_ENABLE = 0x01, + WA_RESET = 0x02, + RPIPE_PAUSE = 0x1, + RPIPE_STALL = 0x2, +}; + +/* Responses from Get Status request ([WUSB] section 8.3.1.6) */ +enum { + WA_STATUS_ENABLED = 0x01, + WA_STATUS_RESETTING = 0x02 +}; + +enum rpipe_crs { + RPIPE_CRS_CTL = 0x01, + RPIPE_CRS_ISO = 0x02, + RPIPE_CRS_BULK = 0x04, + RPIPE_CRS_INTR = 0x08 +}; + +/** + * RPipe descriptor ([WUSB] section 8.5.2.11) + * + * FIXME: explain rpipes + */ +struct usb_rpipe_descriptor { + u8 bLength; + u8 bDescriptorType; + __le16 wRPipeIndex; + __le16 wRequests; + __le16 wBlocks; /* rw if 0 */ + __le16 wMaxPacketSize; /* rw */ + union { + u8 dwa_bHSHubAddress; /* rw: DWA. */ + u8 hwa_bMaxBurst; /* rw: HWA. */ + }; + union { + u8 dwa_bHSHubPort; /* rw: DWA. */ + u8 hwa_bDeviceInfoIndex; /* rw: HWA. */ + }; + u8 bSpeed; /* rw: xfer rate 'enum uwb_phy_rate' */ + union { + u8 dwa_bDeviceAddress; /* rw: DWA Target device address. */ + u8 hwa_reserved; /* rw: HWA. */ + }; + u8 bEndpointAddress; /* rw: Target EP address */ + u8 bDataSequence; /* ro: Current Data sequence */ + __le32 dwCurrentWindow; /* ro */ + u8 bMaxDataSequence; /* ro?: max supported seq */ + u8 bInterval; /* rw: */ + u8 bOverTheAirInterval; /* rw: */ + u8 bmAttribute; /* ro? */ + u8 bmCharacteristics; /* ro? enum rpipe_attr, supported xsactions */ + u8 bmRetryOptions; /* rw? */ + __le16 wNumTransactionErrors; /* rw */ +} __attribute__ ((packed)); + +/** + * Wire Adapter Notification types ([WUSB] sections 8.4.5 & 8.5.4) + * + * These are the notifications coming on the notification endpoint of + * an HWA and a DWA. + */ +enum wa_notif_type { + DWA_NOTIF_RWAKE = 0x91, + DWA_NOTIF_PORTSTATUS = 0x92, + WA_NOTIF_TRANSFER = 0x93, + HWA_NOTIF_BPST_ADJ = 0x94, + HWA_NOTIF_DN = 0x95, +}; + +/** + * Wire Adapter notification header + * + * Notifications coming from a wire adapter use a common header + * defined in [WUSB] sections 8.4.5 & 8.5.4. + */ +struct wa_notif_hdr { + u8 bLength; + u8 bNotifyType; /* enum wa_notif_type */ +} __packed; + +/** + * HWA DN Received notification [(WUSB] section 8.5.4.2) + * + * The DNData is specified in WUSB1.0[7.6]. For each device + * notification we received, we just need to dispatch it. + * + * @dndata: this is really an array of notifications, but all start + * with the same header. + */ +struct hwa_notif_dn { + struct wa_notif_hdr hdr; + u8 bSourceDeviceAddr; /* from errata 2005/07 */ + u8 bmAttributes; + struct wusb_dn_hdr dndata[]; +} __packed; + +/* [WUSB] section 8.3.3 */ +enum wa_xfer_type { + WA_XFER_TYPE_CTL = 0x80, + WA_XFER_TYPE_BI = 0x81, /* bulk/interrupt */ + WA_XFER_TYPE_ISO = 0x82, + WA_XFER_RESULT = 0x83, + WA_XFER_ABORT = 0x84, + WA_XFER_ISO_PACKET_INFO = 0xA0, + WA_XFER_ISO_PACKET_STATUS = 0xA1, +}; + +/* [WUSB] section 8.3.3 */ +struct wa_xfer_hdr { + u8 bLength; /* 0x18 */ + u8 bRequestType; /* 0x80 WA_REQUEST_TYPE_CTL */ + __le16 wRPipe; /* RPipe index */ + __le32 dwTransferID; /* Host-assigned ID */ + __le32 dwTransferLength; /* Length of data to xfer */ + u8 bTransferSegment; +} __packed; + +struct wa_xfer_ctl { + struct wa_xfer_hdr hdr; + u8 bmAttribute; + __le16 wReserved; + struct usb_ctrlrequest baSetupData; +} __packed; + +struct wa_xfer_bi { + struct wa_xfer_hdr hdr; + u8 bReserved; + __le16 wReserved; +} __packed; + +/* [WUSB] section 8.5.5 */ +struct wa_xfer_hwaiso { + struct wa_xfer_hdr hdr; + u8 bReserved; + __le16 wPresentationTime; + __le32 dwNumOfPackets; +} __packed; + +struct wa_xfer_packet_info_hwaiso { + __le16 wLength; + u8 bPacketType; + u8 bReserved; + __le16 PacketLength[0]; +} __packed; + +struct wa_xfer_packet_status_len_hwaiso { + __le16 PacketLength; + __le16 PacketStatus; +} __packed; + +struct wa_xfer_packet_status_hwaiso { + __le16 wLength; + u8 bPacketType; + u8 bReserved; + struct wa_xfer_packet_status_len_hwaiso PacketStatus[0]; +} __packed; + +/* [WUSB] section 8.3.3.5 */ +struct wa_xfer_abort { + u8 bLength; + u8 bRequestType; + __le16 wRPipe; /* RPipe index */ + __le32 dwTransferID; /* Host-assigned ID */ +} __packed; + +/** + * WA Transfer Complete notification ([WUSB] section 8.3.3.3) + * + */ +struct wa_notif_xfer { + struct wa_notif_hdr hdr; + u8 bEndpoint; + u8 Reserved; +} __packed; + +/** Transfer result basic codes [WUSB] table 8-15 */ +enum { + WA_XFER_STATUS_SUCCESS, + WA_XFER_STATUS_HALTED, + WA_XFER_STATUS_DATA_BUFFER_ERROR, + WA_XFER_STATUS_BABBLE, + WA_XFER_RESERVED, + WA_XFER_STATUS_NOT_FOUND, + WA_XFER_STATUS_INSUFFICIENT_RESOURCE, + WA_XFER_STATUS_TRANSACTION_ERROR, + WA_XFER_STATUS_ABORTED, + WA_XFER_STATUS_RPIPE_NOT_READY, + WA_XFER_INVALID_FORMAT, + WA_XFER_UNEXPECTED_SEGMENT_NUMBER, + WA_XFER_STATUS_RPIPE_TYPE_MISMATCH, +}; + +/** [WUSB] section 8.3.3.4 */ +struct wa_xfer_result { + struct wa_notif_hdr hdr; + __le32 dwTransferID; + __le32 dwTransferLength; + u8 bTransferSegment; + u8 bTransferStatus; + __le32 dwNumOfPackets; +} __packed; + +/** + * Wire Adapter Class Descriptor ([WUSB] section 8.5.2.7). + * + * NOTE: u16 fields are read Little Endian from the hardware. + * + * @bNumPorts is the original max number of devices that the host can + * connect; we might chop this so the stack can handle + * it. In case you need to access it, use wusbhc->ports_max + * if it is a Wireless USB WA. + */ +struct usb_wa_descriptor { + u8 bLength; + u8 bDescriptorType; + __le16 bcdWAVersion; + u8 bNumPorts; /* don't use!! */ + u8 bmAttributes; /* Reserved == 0 */ + __le16 wNumRPipes; + __le16 wRPipeMaxBlock; + u8 bRPipeBlockSize; + u8 bPwrOn2PwrGood; + u8 bNumMMCIEs; + u8 DeviceRemovable; /* FIXME: in DWA this is up to 16 bytes */ +} __packed; + +/** + * HWA Device Information Buffer (WUSB1.0[T8.54]) + */ +struct hwa_dev_info { + u8 bmDeviceAvailability[32]; /* FIXME: ignored for now */ + u8 bDeviceAddress; + __le16 wPHYRates; + u8 bmDeviceAttribute; +} __packed; + +#endif /* #ifndef __LINUX_USB_WUSB_WA_H */ |