diff options
Diffstat (limited to 'include/media/i2c/saa7115.h')
| -rw-r--r-- | include/media/i2c/saa7115.h | 140 |
1 files changed, 140 insertions, 0 deletions
diff --git a/include/media/i2c/saa7115.h b/include/media/i2c/saa7115.h new file mode 100644 index 000000000..53954c90e --- /dev/null +++ b/include/media/i2c/saa7115.h @@ -0,0 +1,140 @@ +/* + saa7115.h - definition for saa7111/3/4/5 inputs and frequency flags + + Copyright (C) 2006 Hans Verkuil (hverkuil@xs4all.nl) + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + +#ifndef _SAA7115_H_ +#define _SAA7115_H_ + +/* s_routing inputs, outputs, and config */ + +/* SAA7111/3/4/5 HW inputs */ +#define SAA7115_COMPOSITE0 0 +#define SAA7115_COMPOSITE1 1 +#define SAA7115_COMPOSITE2 2 +#define SAA7115_COMPOSITE3 3 +#define SAA7115_COMPOSITE4 4 /* not available for the saa7111/3 */ +#define SAA7115_COMPOSITE5 5 /* not available for the saa7111/3 */ +#define SAA7115_SVIDEO0 6 +#define SAA7115_SVIDEO1 7 +#define SAA7115_SVIDEO2 8 +#define SAA7115_SVIDEO3 9 + +/* outputs */ +#define SAA7115_IPORT_ON 1 +#define SAA7115_IPORT_OFF 0 + +/* SAA7111 specific outputs. */ +#define SAA7111_VBI_BYPASS 2 +#define SAA7111_FMT_YUV422 0x00 +#define SAA7111_FMT_RGB 0x40 +#define SAA7111_FMT_CCIR 0x80 +#define SAA7111_FMT_YUV411 0xc0 + +/* config flags */ +/* + * Register 0x85 should set bit 0 to 0 (it's 1 by default). This bit + * controls the IDQ signal polarity which is set to 'inverted' if the bit + * it 1 and to 'default' if it is 0. + */ +#define SAA7115_IDQ_IS_DEFAULT (1 << 0) + +/* s_crystal_freq values and flags */ + +/* SAA7115 v4l2_crystal_freq frequency values */ +#define SAA7115_FREQ_32_11_MHZ 32110000 /* 32.11 MHz crystal, SAA7114/5 only */ +#define SAA7115_FREQ_24_576_MHZ 24576000 /* 24.576 MHz crystal */ + +/* SAA7115 v4l2_crystal_freq audio clock control flags */ +#define SAA7115_FREQ_FL_UCGC (1 << 0) /* SA 3A[7], UCGC, SAA7115 only */ +#define SAA7115_FREQ_FL_CGCDIV (1 << 1) /* SA 3A[6], CGCDIV, SAA7115 only */ +#define SAA7115_FREQ_FL_APLL (1 << 2) /* SA 3A[3], APLL, SAA7114/5 only */ +#define SAA7115_FREQ_FL_DOUBLE_ASCLK (1 << 3) /* SA 39, LRDIV, SAA7114/5 only */ + +/* ===== SAA7113 Config enums ===== */ + +/* Register 0x08 "Horizontal time constant" [Bit 3..4]: + * Should be set to "Fast Locking Mode" according to the datasheet, + * and that is the default setting in the gm7113c_init table. + * saa7113_init sets this value to "VTR Mode". */ +enum saa7113_r08_htc { + SAA7113_HTC_TV_MODE = 0x00, + SAA7113_HTC_VTR_MODE, /* Default for saa7113_init */ + SAA7113_HTC_FAST_LOCKING_MODE = 0x03 /* Default for gm7113c_init */ +}; + +/* Register 0x10 "Output format selection" [Bit 6..7]: + * Defaults to ITU_656 as specified in datasheet. */ +enum saa7113_r10_ofts { + SAA7113_OFTS_ITU_656 = 0x0, /* Default */ + SAA7113_OFTS_VFLAG_BY_VREF, + SAA7113_OFTS_VFLAG_BY_DATA_TYPE +}; + +/* + * Register 0x12 "Output control" [Bit 0..3 Or Bit 4..7]: + * This is used to select what data is output on the RTS0 and RTS1 pins. + * RTS1 [Bit 4..7] Defaults to DOT_IN. (This value can not be set for RTS0) + * RTS0 [Bit 0..3] Defaults to VIPB in gm7113c_init as specified + * in the datasheet, but is set to HREF_HS in the saa7113_init table. + */ +enum saa7113_r12_rts { + SAA7113_RTS_DOT_IN = 0, /* OBS: Only for RTS1 (Default RTS1) */ + SAA7113_RTS_VIPB, /* Default RTS0 For gm7113c_init */ + SAA7113_RTS_GPSW, + SAA7115_RTS_HL, + SAA7113_RTS_VL, + SAA7113_RTS_DL, + SAA7113_RTS_PLIN, + SAA7113_RTS_HREF_HS, /* Default RTS0 For saa7113_init */ + SAA7113_RTS_HS, + SAA7113_RTS_HQ, + SAA7113_RTS_ODD, + SAA7113_RTS_VS, + SAA7113_RTS_V123, + SAA7113_RTS_VGATE, + SAA7113_RTS_VREF, + SAA7113_RTS_FID +}; + +/** + * struct saa7115_platform_data - Allow overriding default initialization + * + * @saa7113_force_gm7113c_init: Force the use of the gm7113c_init table + * instead of saa7113_init table + * (saa7113 only) + * @saa7113_r08_htc: [R_08 - Bit 3..4] + * @saa7113_r10_vrln: [R_10 - Bit 3] + * default: Disabled for gm7113c_init + * Enabled for saa7113c_init + * @saa7113_r10_ofts: [R_10 - Bit 6..7] + * @saa7113_r12_rts0: [R_12 - Bit 0..3] + * @saa7113_r12_rts1: [R_12 - Bit 4..7] + * @saa7113_r13_adlsb: [R_13 - Bit 7] - default: disabled + */ +struct saa7115_platform_data { + bool saa7113_force_gm7113c_init; + enum saa7113_r08_htc *saa7113_r08_htc; + bool *saa7113_r10_vrln; + enum saa7113_r10_ofts *saa7113_r10_ofts; + enum saa7113_r12_rts *saa7113_r12_rts0; + enum saa7113_r12_rts *saa7113_r12_rts1; + bool *saa7113_r13_adlsb; +}; + +#endif |