diff options
Diffstat (limited to 'include/rxrpc')
| -rw-r--r-- | include/rxrpc/packet.h | 215 |
1 files changed, 215 insertions, 0 deletions
diff --git a/include/rxrpc/packet.h b/include/rxrpc/packet.h new file mode 100644 index 000000000..4dce116bf --- /dev/null +++ b/include/rxrpc/packet.h @@ -0,0 +1,215 @@ +/* packet.h: Rx packet layout and definitions + * + * Copyright (C) 2002, 2007 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#ifndef _LINUX_RXRPC_PACKET_H +#define _LINUX_RXRPC_PACKET_H + +typedef u32 rxrpc_seq_t; /* Rx message sequence number */ +typedef u32 rxrpc_serial_t; /* Rx message serial number */ +typedef __be32 rxrpc_seq_net_t; /* on-the-wire Rx message sequence number */ +typedef __be32 rxrpc_serial_net_t; /* on-the-wire Rx message serial number */ + +/*****************************************************************************/ +/* + * on-the-wire Rx packet header + * - all multibyte fields should be in network byte order + */ +struct rxrpc_header { + __be32 epoch; /* client boot timestamp */ + + __be32 cid; /* connection and channel ID */ +#define RXRPC_MAXCALLS 4 /* max active calls per conn */ +#define RXRPC_CHANNELMASK (RXRPC_MAXCALLS-1) /* mask for channel ID */ +#define RXRPC_CIDMASK (~RXRPC_CHANNELMASK) /* mask for connection ID */ +#define RXRPC_CIDSHIFT ilog2(RXRPC_MAXCALLS) /* shift for connection ID */ +#define RXRPC_CID_INC (1 << RXRPC_CIDSHIFT) /* connection ID increment */ + + __be32 callNumber; /* call ID (0 for connection-level packets) */ +#define RXRPC_PROCESS_MAXCALLS (1<<2) /* maximum number of active calls per conn (power of 2) */ + + __be32 seq; /* sequence number of pkt in call stream */ + __be32 serial; /* serial number of pkt sent to network */ + + uint8_t type; /* packet type */ +#define RXRPC_PACKET_TYPE_DATA 1 /* data */ +#define RXRPC_PACKET_TYPE_ACK 2 /* ACK */ +#define RXRPC_PACKET_TYPE_BUSY 3 /* call reject */ +#define RXRPC_PACKET_TYPE_ABORT 4 /* call/connection abort */ +#define RXRPC_PACKET_TYPE_ACKALL 5 /* ACK all outstanding packets on call */ +#define RXRPC_PACKET_TYPE_CHALLENGE 6 /* connection security challenge (SRVR->CLNT) */ +#define RXRPC_PACKET_TYPE_RESPONSE 7 /* connection secutity response (CLNT->SRVR) */ +#define RXRPC_PACKET_TYPE_DEBUG 8 /* debug info request */ +#define RXRPC_PACKET_TYPE_VERSION 13 /* version string request */ +#define RXRPC_N_PACKET_TYPES 14 /* number of packet types (incl type 0) */ + + uint8_t flags; /* packet flags */ +#define RXRPC_CLIENT_INITIATED 0x01 /* signifies a packet generated by a client */ +#define RXRPC_REQUEST_ACK 0x02 /* request an unconditional ACK of this packet */ +#define RXRPC_LAST_PACKET 0x04 /* the last packet from this side for this call */ +#define RXRPC_MORE_PACKETS 0x08 /* more packets to come */ +#define RXRPC_JUMBO_PACKET 0x20 /* [DATA] this is a jumbo packet */ +#define RXRPC_SLOW_START_OK 0x20 /* [ACK] slow start supported */ + + uint8_t userStatus; /* app-layer defined status */ + uint8_t securityIndex; /* security protocol ID */ + union { + __be16 _rsvd; /* reserved */ + __be16 cksum; /* kerberos security checksum */ + }; + __be16 serviceId; /* service ID */ + +} __packed; + +#define __rxrpc_header_off(X) offsetof(struct rxrpc_header,X) + +extern const char *rxrpc_pkts[]; + +/*****************************************************************************/ +/* + * jumbo packet secondary header + * - can be mapped to read header by: + * - new_serial = serial + 1 + * - new_seq = seq + 1 + * - new_flags = j_flags + * - new__rsvd = j__rsvd + * - duplicating all other fields + */ +struct rxrpc_jumbo_header { + uint8_t flags; /* packet flags (as per rxrpc_header) */ + uint8_t pad; + __be16 _rsvd; /* reserved (used by kerberos security as cksum) */ +}; + +#define RXRPC_JUMBO_DATALEN 1412 /* non-terminal jumbo packet data length */ + +/*****************************************************************************/ +/* + * on-the-wire Rx ACK packet data payload + * - all multibyte fields should be in network byte order + */ +struct rxrpc_ackpacket { + __be16 bufferSpace; /* number of packet buffers available */ + __be16 maxSkew; /* diff between serno being ACK'd and highest serial no + * received */ + __be32 firstPacket; /* sequence no of first ACK'd packet in attached list */ + __be32 previousPacket; /* sequence no of previous packet received */ + __be32 serial; /* serial no of packet that prompted this ACK */ + + uint8_t reason; /* reason for ACK */ +#define RXRPC_ACK_REQUESTED 1 /* ACK was requested on packet */ +#define RXRPC_ACK_DUPLICATE 2 /* duplicate packet received */ +#define RXRPC_ACK_OUT_OF_SEQUENCE 3 /* out of sequence packet received */ +#define RXRPC_ACK_EXCEEDS_WINDOW 4 /* packet received beyond end of ACK window */ +#define RXRPC_ACK_NOSPACE 5 /* packet discarded due to lack of buffer space */ +#define RXRPC_ACK_PING 6 /* keep alive ACK */ +#define RXRPC_ACK_PING_RESPONSE 7 /* response to RXRPC_ACK_PING */ +#define RXRPC_ACK_DELAY 8 /* nothing happened since received packet */ +#define RXRPC_ACK_IDLE 9 /* ACK due to fully received ACK window */ + + uint8_t nAcks; /* number of ACKs */ +#define RXRPC_MAXACKS 255 + + uint8_t acks[0]; /* list of ACK/NAKs */ +#define RXRPC_ACK_TYPE_NACK 0 +#define RXRPC_ACK_TYPE_ACK 1 + +} __packed; + +/* + * ACK packets can have a further piece of information tagged on the end + */ +struct rxrpc_ackinfo { + __be32 rxMTU; /* maximum Rx MTU size (bytes) [AFS 3.3] */ + __be32 maxMTU; /* maximum interface MTU size (bytes) [AFS 3.3] */ + __be32 rwind; /* Rx window size (packets) [AFS 3.4] */ + __be32 jumbo_max; /* max packets to stick into a jumbo packet [AFS 3.5] */ +}; + +/*****************************************************************************/ +/* + * Kerberos security type-2 challenge packet + */ +struct rxkad_challenge { + __be32 version; /* version of this challenge type */ + __be32 nonce; /* encrypted random number */ + __be32 min_level; /* minimum security level */ + __be32 __padding; /* padding to 8-byte boundary */ +} __packed; + +/*****************************************************************************/ +/* + * Kerberos security type-2 response packet + */ +struct rxkad_response { + __be32 version; /* version of this response type */ + __be32 __pad; + + /* encrypted bit of the response */ + struct { + __be32 epoch; /* current epoch */ + __be32 cid; /* parent connection ID */ + __be32 checksum; /* checksum */ + __be32 securityIndex; /* security type */ + __be32 call_id[4]; /* encrypted call IDs */ + __be32 inc_nonce; /* challenge nonce + 1 */ + __be32 level; /* desired level */ + } encrypted; + + __be32 kvno; /* Kerberos key version number */ + __be32 ticket_len; /* Kerberos ticket length */ +} __packed; + +/*****************************************************************************/ +/* + * RxRPC-level abort codes + */ +#define RX_CALL_DEAD -1 /* call/conn has been inactive and is shut down */ +#define RX_INVALID_OPERATION -2 /* invalid operation requested / attempted */ +#define RX_CALL_TIMEOUT -3 /* call timeout exceeded */ +#define RX_EOF -4 /* unexpected end of data on read op */ +#define RX_PROTOCOL_ERROR -5 /* low-level protocol error */ +#define RX_USER_ABORT -6 /* generic user abort */ +#define RX_ADDRINUSE -7 /* UDP port in use */ +#define RX_DEBUGI_BADTYPE -8 /* bad debugging packet type */ + +/* + * (un)marshalling abort codes (rxgen) + */ +#define RXGEN_CC_MARSHAL -450 +#define RXGEN_CC_UNMARSHAL -451 +#define RXGEN_SS_MARSHAL -452 +#define RXGEN_SS_UNMARSHAL -453 +#define RXGEN_DECODE -454 +#define RXGEN_OPCODE -455 +#define RXGEN_SS_XDRFREE -456 +#define RXGEN_CC_XDRFREE -457 + +/* + * Rx kerberos security abort codes + * - unfortunately we have no generalised security abort codes to say things + * like "unsupported security", so we have to use these instead and hope the + * other side understands + */ +#define RXKADINCONSISTENCY 19270400 /* security module structure inconsistent */ +#define RXKADPACKETSHORT 19270401 /* packet too short for security challenge */ +#define RXKADLEVELFAIL 19270402 /* security level negotiation failed */ +#define RXKADTICKETLEN 19270403 /* ticket length too short or too long */ +#define RXKADOUTOFSEQUENCE 19270404 /* packet had bad sequence number */ +#define RXKADNOAUTH 19270405 /* caller not authorised */ +#define RXKADBADKEY 19270406 /* illegal key: bad parity or weak */ +#define RXKADBADTICKET 19270407 /* security object was passed a bad ticket */ +#define RXKADUNKNOWNKEY 19270408 /* ticket contained unknown key version number */ +#define RXKADEXPIRED 19270409 /* authentication expired */ +#define RXKADSEALEDINCON 19270410 /* sealed data inconsistent */ +#define RXKADDATALEN 19270411 /* user data too long */ +#define RXKADILLEGALLEVEL 19270412 /* caller not authorised to use encrypted conns */ + +#endif /* _LINUX_RXRPC_PACKET_H */ |