diff options
Diffstat (limited to 'include/uapi/linux/mroute6.h')
| -rw-r--r-- | include/uapi/linux/mroute6.h | 140 |
1 files changed, 140 insertions, 0 deletions
diff --git a/include/uapi/linux/mroute6.h b/include/uapi/linux/mroute6.h new file mode 100644 index 000000000..ce91215cf --- /dev/null +++ b/include/uapi/linux/mroute6.h @@ -0,0 +1,140 @@ +#ifndef _UAPI__LINUX_MROUTE6_H +#define _UAPI__LINUX_MROUTE6_H + +#include <linux/types.h> +#include <linux/sockios.h> + +/* + * Based on the MROUTING 3.5 defines primarily to keep + * source compatibility with BSD. + * + * See the pim6sd code for the original history. + * + * Protocol Independent Multicast (PIM) data structures included + * Carlos Picoto (cap@di.fc.ul.pt) + * + */ + +#define MRT6_BASE 200 +#define MRT6_INIT (MRT6_BASE) /* Activate the kernel mroute code */ +#define MRT6_DONE (MRT6_BASE+1) /* Shutdown the kernel mroute */ +#define MRT6_ADD_MIF (MRT6_BASE+2) /* Add a virtual interface */ +#define MRT6_DEL_MIF (MRT6_BASE+3) /* Delete a virtual interface */ +#define MRT6_ADD_MFC (MRT6_BASE+4) /* Add a multicast forwarding entry */ +#define MRT6_DEL_MFC (MRT6_BASE+5) /* Delete a multicast forwarding entry */ +#define MRT6_VERSION (MRT6_BASE+6) /* Get the kernel multicast version */ +#define MRT6_ASSERT (MRT6_BASE+7) /* Activate PIM assert mode */ +#define MRT6_PIM (MRT6_BASE+8) /* enable PIM code */ +#define MRT6_TABLE (MRT6_BASE+9) /* Specify mroute table ID */ +#define MRT6_ADD_MFC_PROXY (MRT6_BASE+10) /* Add a (*,*|G) mfc entry */ +#define MRT6_DEL_MFC_PROXY (MRT6_BASE+11) /* Del a (*,*|G) mfc entry */ +#define MRT6_MAX (MRT6_BASE+11) + +#define SIOCGETMIFCNT_IN6 SIOCPROTOPRIVATE /* IP protocol privates */ +#define SIOCGETSGCNT_IN6 (SIOCPROTOPRIVATE+1) +#define SIOCGETRPF (SIOCPROTOPRIVATE+2) + +#define MAXMIFS 32 +typedef unsigned long mifbitmap_t; /* User mode code depends on this lot */ +typedef unsigned short mifi_t; +#define ALL_MIFS ((mifi_t)(-1)) + +#ifndef IF_SETSIZE +#define IF_SETSIZE 256 +#endif + +typedef __u32 if_mask; +#define NIFBITS (sizeof(if_mask) * 8) /* bits per mask */ + +#if !defined(__KERNEL__) +#if !defined(DIV_ROUND_UP) +#define DIV_ROUND_UP(x,y) (((x) + ((y) - 1)) / (y)) +#endif +#endif + +typedef struct if_set { + if_mask ifs_bits[DIV_ROUND_UP(IF_SETSIZE, NIFBITS)]; +} if_set; + +#define IF_SET(n, p) ((p)->ifs_bits[(n)/NIFBITS] |= (1 << ((n) % NIFBITS))) +#define IF_CLR(n, p) ((p)->ifs_bits[(n)/NIFBITS] &= ~(1 << ((n) % NIFBITS))) +#define IF_ISSET(n, p) ((p)->ifs_bits[(n)/NIFBITS] & (1 << ((n) % NIFBITS))) +#define IF_COPY(f, t) bcopy(f, t, sizeof(*(f))) +#define IF_ZERO(p) bzero(p, sizeof(*(p))) + +/* + * Passed by mrouted for an MRT_ADD_MIF - again we use the + * mrouted 3.6 structures for compatibility + */ + +struct mif6ctl { + mifi_t mif6c_mifi; /* Index of MIF */ + unsigned char mif6c_flags; /* MIFF_ flags */ + unsigned char vifc_threshold; /* ttl limit */ + __u16 mif6c_pifi; /* the index of the physical IF */ + unsigned int vifc_rate_limit; /* Rate limiter values (NI) */ +}; + +#define MIFF_REGISTER 0x1 /* register vif */ + +/* + * Cache manipulation structures for mrouted and PIMd + */ + +struct mf6cctl { + struct sockaddr_in6 mf6cc_origin; /* Origin of mcast */ + struct sockaddr_in6 mf6cc_mcastgrp; /* Group in question */ + mifi_t mf6cc_parent; /* Where it arrived */ + struct if_set mf6cc_ifset; /* Where it is going */ +}; + +/* + * Group count retrieval for pim6sd + */ + +struct sioc_sg_req6 { + struct sockaddr_in6 src; + struct sockaddr_in6 grp; + unsigned long pktcnt; + unsigned long bytecnt; + unsigned long wrong_if; +}; + +/* + * To get vif packet counts + */ + +struct sioc_mif_req6 { + mifi_t mifi; /* Which iface */ + unsigned long icount; /* In packets */ + unsigned long ocount; /* Out packets */ + unsigned long ibytes; /* In bytes */ + unsigned long obytes; /* Out bytes */ +}; + +/* + * That's all usermode folks + */ + + + +/* + * Structure used to communicate from kernel to multicast router. + * We'll overlay the structure onto an MLD header (not an IPv6 heder like igmpmsg{} + * used for IPv4 implementation). This is because this structure will be passed via an + * IPv6 raw socket, on which an application will only receiver the payload i.e the data after + * the IPv6 header and all the extension headers. (See section 3 of RFC 3542) + */ + +struct mrt6msg { +#define MRT6MSG_NOCACHE 1 +#define MRT6MSG_WRONGMIF 2 +#define MRT6MSG_WHOLEPKT 3 /* used for use level encap */ + __u8 im6_mbz; /* must be zero */ + __u8 im6_msgtype; /* what type of message */ + __u16 im6_mif; /* mif rec'd on */ + __u32 im6_pad; /* padding for 64 bit arch */ + struct in6_addr im6_src, im6_dst; +}; + +#endif /* _UAPI__LINUX_MROUTE6_H */ |