summaryrefslogtreecommitdiff
path: root/include/uapi/linux/vfio.h
diff options
context:
space:
mode:
Diffstat (limited to 'include/uapi/linux/vfio.h')
-rw-r--r--include/uapi/linux/vfio.h102
1 files changed, 98 insertions, 4 deletions
diff --git a/include/uapi/linux/vfio.h b/include/uapi/linux/vfio.h
index b57b750c2..9fd7b5d8d 100644
--- a/include/uapi/linux/vfio.h
+++ b/include/uapi/linux/vfio.h
@@ -36,6 +36,8 @@
/* Two-stage IOMMU */
#define VFIO_TYPE1_NESTING_IOMMU 6 /* Implies v2 */
+#define VFIO_SPAPR_TCE_v2_IOMMU 7
+
/*
* The IOCTL interface is designed for extensibility by embedding the
* structure length (argsz) and flags into structures passed between
@@ -443,6 +445,23 @@ struct vfio_iommu_type1_dma_unmap {
/* -------- Additional API for SPAPR TCE (Server POWERPC) IOMMU -------- */
/*
+ * The SPAPR TCE DDW info struct provides the information about
+ * the details of Dynamic DMA window capability.
+ *
+ * @pgsizes contains a page size bitmask, 4K/64K/16M are supported.
+ * @max_dynamic_windows_supported tells the maximum number of windows
+ * which the platform can create.
+ * @levels tells the maximum number of levels in multi-level IOMMU tables;
+ * this allows splitting a table into smaller chunks which reduces
+ * the amount of physically contiguous memory required for the table.
+ */
+struct vfio_iommu_spapr_tce_ddw_info {
+ __u64 pgsizes; /* Bitmap of supported page sizes */
+ __u32 max_dynamic_windows_supported;
+ __u32 levels;
+};
+
+/*
* The SPAPR TCE info struct provides the information about the PCI bus
* address ranges available for DMA, these values are programmed into
* the hardware so the guest has to know that information.
@@ -452,14 +471,17 @@ struct vfio_iommu_type1_dma_unmap {
* addresses too so the window works as a filter rather than an offset
* for IOVA addresses.
*
- * A flag will need to be added if other page sizes are supported,
- * so as defined here, it is always 4k.
+ * Flags supported:
+ * - VFIO_IOMMU_SPAPR_INFO_DDW: informs the userspace that dynamic DMA windows
+ * (DDW) support is present. @ddw is only supported when DDW is present.
*/
struct vfio_iommu_spapr_tce_info {
__u32 argsz;
- __u32 flags; /* reserved for future use */
+ __u32 flags;
+#define VFIO_IOMMU_SPAPR_INFO_DDW (1 << 0) /* DDW supported */
__u32 dma32_window_start; /* 32 bit window start (bytes) */
__u32 dma32_window_size; /* 32 bit window size (bytes) */
+ struct vfio_iommu_spapr_tce_ddw_info ddw;
};
#define VFIO_IOMMU_SPAPR_TCE_GET_INFO _IO(VFIO_TYPE, VFIO_BASE + 12)
@@ -470,12 +492,23 @@ struct vfio_iommu_spapr_tce_info {
* - unfreeze IO/DMA for frozen PE;
* - read PE state;
* - reset PE;
- * - configure PE.
+ * - configure PE;
+ * - inject EEH error.
*/
+struct vfio_eeh_pe_err {
+ __u32 type;
+ __u32 func;
+ __u64 addr;
+ __u64 mask;
+};
+
struct vfio_eeh_pe_op {
__u32 argsz;
__u32 flags;
__u32 op;
+ union {
+ struct vfio_eeh_pe_err err;
+ };
};
#define VFIO_EEH_PE_DISABLE 0 /* Disable EEH functionality */
@@ -492,9 +525,70 @@ struct vfio_eeh_pe_op {
#define VFIO_EEH_PE_RESET_HOT 6 /* Assert hot reset */
#define VFIO_EEH_PE_RESET_FUNDAMENTAL 7 /* Assert fundamental reset */
#define VFIO_EEH_PE_CONFIGURE 8 /* PE configuration */
+#define VFIO_EEH_PE_INJECT_ERR 9 /* Inject EEH error */
#define VFIO_EEH_PE_OP _IO(VFIO_TYPE, VFIO_BASE + 21)
+/**
+ * VFIO_IOMMU_SPAPR_REGISTER_MEMORY - _IOW(VFIO_TYPE, VFIO_BASE + 17, struct vfio_iommu_spapr_register_memory)
+ *
+ * Registers user space memory where DMA is allowed. It pins
+ * user pages and does the locked memory accounting so
+ * subsequent VFIO_IOMMU_MAP_DMA/VFIO_IOMMU_UNMAP_DMA calls
+ * get faster.
+ */
+struct vfio_iommu_spapr_register_memory {
+ __u32 argsz;
+ __u32 flags;
+ __u64 vaddr; /* Process virtual address */
+ __u64 size; /* Size of mapping (bytes) */
+};
+#define VFIO_IOMMU_SPAPR_REGISTER_MEMORY _IO(VFIO_TYPE, VFIO_BASE + 17)
+
+/**
+ * VFIO_IOMMU_SPAPR_UNREGISTER_MEMORY - _IOW(VFIO_TYPE, VFIO_BASE + 18, struct vfio_iommu_spapr_register_memory)
+ *
+ * Unregisters user space memory registered with
+ * VFIO_IOMMU_SPAPR_REGISTER_MEMORY.
+ * Uses vfio_iommu_spapr_register_memory for parameters.
+ */
+#define VFIO_IOMMU_SPAPR_UNREGISTER_MEMORY _IO(VFIO_TYPE, VFIO_BASE + 18)
+
+/**
+ * VFIO_IOMMU_SPAPR_TCE_CREATE - _IOWR(VFIO_TYPE, VFIO_BASE + 19, struct vfio_iommu_spapr_tce_create)
+ *
+ * Creates an additional TCE table and programs it (sets a new DMA window)
+ * to every IOMMU group in the container. It receives page shift, window
+ * size and number of levels in the TCE table being created.
+ *
+ * It allocates and returns an offset on a PCI bus of the new DMA window.
+ */
+struct vfio_iommu_spapr_tce_create {
+ __u32 argsz;
+ __u32 flags;
+ /* in */
+ __u32 page_shift;
+ __u64 window_size;
+ __u32 levels;
+ /* out */
+ __u64 start_addr;
+};
+#define VFIO_IOMMU_SPAPR_TCE_CREATE _IO(VFIO_TYPE, VFIO_BASE + 19)
+
+/**
+ * VFIO_IOMMU_SPAPR_TCE_REMOVE - _IOW(VFIO_TYPE, VFIO_BASE + 20, struct vfio_iommu_spapr_tce_remove)
+ *
+ * Unprograms a TCE table from all groups in the container and destroys it.
+ * It receives a PCI bus offset as a window id.
+ */
+struct vfio_iommu_spapr_tce_remove {
+ __u32 argsz;
+ __u32 flags;
+ /* in */
+ __u64 start_addr;
+};
+#define VFIO_IOMMU_SPAPR_TCE_REMOVE _IO(VFIO_TYPE, VFIO_BASE + 20)
+
/* ***************************************************************** */
#endif /* _UAPIVFIO_H */