diff options
Diffstat (limited to 'include/uapi/linux/vfio.h')
| -rw-r--r-- | include/uapi/linux/vfio.h | 92 |
1 files changed, 90 insertions, 2 deletions
diff --git a/include/uapi/linux/vfio.h b/include/uapi/linux/vfio.h index 7d7a4c6f2..255a2113f 100644 --- a/include/uapi/linux/vfio.h +++ b/include/uapi/linux/vfio.h @@ -59,6 +59,33 @@ #define VFIO_TYPE (';') #define VFIO_BASE 100 +/* + * For extension of INFO ioctls, VFIO makes use of a capability chain + * designed after PCI/e capabilities. A flag bit indicates whether + * this capability chain is supported and a field defined in the fixed + * structure defines the offset of the first capability in the chain. + * This field is only valid when the corresponding bit in the flags + * bitmap is set. This offset field is relative to the start of the + * INFO buffer, as is the next field within each capability header. + * The id within the header is a shared address space per INFO ioctl, + * while the version field is specific to the capability id. The + * contents following the header are specific to the capability id. + */ +struct vfio_info_cap_header { + __u16 id; /* Identifies capability */ + __u16 version; /* Version specific to the capability ID */ + __u32 next; /* Offset of next capability */ +}; + +/* + * Callers of INFO ioctls passing insufficiently sized buffers will see + * the capability chain flag bit set, a zero value for the first capability + * offset (if available within the provided argsz), and argsz will be + * updated to report the necessary buffer size. For compatibility, the + * INFO ioctl will not report error in this case, but the capability chain + * will not be available. + */ + /* -------- IOCTLs for VFIO file descriptor (/dev/vfio/vfio) -------- */ /** @@ -194,13 +221,73 @@ struct vfio_region_info { #define VFIO_REGION_INFO_FLAG_READ (1 << 0) /* Region supports read */ #define VFIO_REGION_INFO_FLAG_WRITE (1 << 1) /* Region supports write */ #define VFIO_REGION_INFO_FLAG_MMAP (1 << 2) /* Region supports mmap */ +#define VFIO_REGION_INFO_FLAG_CAPS (1 << 3) /* Info supports caps */ __u32 index; /* Region index */ - __u32 resv; /* Reserved for alignment */ + __u32 cap_offset; /* Offset within info struct of first cap */ __u64 size; /* Region size (bytes) */ __u64 offset; /* Region offset from start of device fd */ }; #define VFIO_DEVICE_GET_REGION_INFO _IO(VFIO_TYPE, VFIO_BASE + 8) +/* + * The sparse mmap capability allows finer granularity of specifying areas + * within a region with mmap support. When specified, the user should only + * mmap the offset ranges specified by the areas array. mmaps outside of the + * areas specified may fail (such as the range covering a PCI MSI-X table) or + * may result in improper device behavior. + * + * The structures below define version 1 of this capability. + */ +#define VFIO_REGION_INFO_CAP_SPARSE_MMAP 1 + +struct vfio_region_sparse_mmap_area { + __u64 offset; /* Offset of mmap'able area within region */ + __u64 size; /* Size of mmap'able area */ +}; + +struct vfio_region_info_cap_sparse_mmap { + struct vfio_info_cap_header header; + __u32 nr_areas; + __u32 reserved; + struct vfio_region_sparse_mmap_area areas[]; +}; + +/* + * The device specific type capability allows regions unique to a specific + * device or class of devices to be exposed. This helps solve the problem for + * vfio bus drivers of defining which region indexes correspond to which region + * on the device, without needing to resort to static indexes, as done by + * vfio-pci. For instance, if we were to go back in time, we might remove + * VFIO_PCI_VGA_REGION_INDEX and let vfio-pci simply define that all indexes + * greater than or equal to VFIO_PCI_NUM_REGIONS are device specific and we'd + * make a "VGA" device specific type to describe the VGA access space. This + * means that non-VGA devices wouldn't need to waste this index, and thus the + * address space associated with it due to implementation of device file + * descriptor offsets in vfio-pci. + * + * The current implementation is now part of the user ABI, so we can't use this + * for VGA, but there are other upcoming use cases, such as opregions for Intel + * IGD devices and framebuffers for vGPU devices. We missed VGA, but we'll + * use this for future additions. + * + * The structure below defines version 1 of this capability. + */ +#define VFIO_REGION_INFO_CAP_TYPE 2 + +struct vfio_region_info_cap_type { + struct vfio_info_cap_header header; + __u32 type; /* global per bus driver */ + __u32 subtype; /* type specific */ +}; + +#define VFIO_REGION_TYPE_PCI_VENDOR_TYPE (1 << 31) +#define VFIO_REGION_TYPE_PCI_VENDOR_MASK (0xffff) + +/* 8086 Vendor sub-types */ +#define VFIO_REGION_SUBTYPE_INTEL_IGD_OPREGION (1) +#define VFIO_REGION_SUBTYPE_INTEL_IGD_HOST_CFG (2) +#define VFIO_REGION_SUBTYPE_INTEL_IGD_LPC_CFG (3) + /** * VFIO_DEVICE_GET_IRQ_INFO - _IOWR(VFIO_TYPE, VFIO_BASE + 9, * struct vfio_irq_info) @@ -336,7 +423,8 @@ enum { * between described ranges are unimplemented. */ VFIO_PCI_VGA_REGION_INDEX, - VFIO_PCI_NUM_REGIONS + VFIO_PCI_NUM_REGIONS = 9 /* Fixed user ABI, region indexes >=9 use */ + /* device specific cap to define content. */ }; enum { |