diff options
Diffstat (limited to 'include/uapi/linux/wimax/i2400m.h')
-rw-r--r-- | include/uapi/linux/wimax/i2400m.h | 572 |
1 files changed, 572 insertions, 0 deletions
diff --git a/include/uapi/linux/wimax/i2400m.h b/include/uapi/linux/wimax/i2400m.h new file mode 100644 index 000000000..fd198bc24 --- /dev/null +++ b/include/uapi/linux/wimax/i2400m.h @@ -0,0 +1,572 @@ +/* + * Intel Wireless WiMax Connection 2400m + * Host-Device protocol interface definitions + * + * + * Copyright (C) 2007-2008 Intel Corporation. All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * + * Intel Corporation <linux-wimax@intel.com> + * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com> + * - Initial implementation + * + * + * This header defines the data structures and constants used to + * communicate with the device. + * + * BOOTMODE/BOOTROM/FIRMWARE UPLOAD PROTOCOL + * + * The firmware upload protocol is quite simple and only requires a + * handful of commands. See drivers/net/wimax/i2400m/fw.c for more + * details. + * + * The BCF data structure is for the firmware file header. + * + * + * THE DATA / CONTROL PROTOCOL + * + * This is the normal protocol spoken with the device once the + * firmware is uploaded. It transports data payloads and control + * messages back and forth. + * + * It consists 'messages' that pack one or more payloads each. The + * format is described in detail in drivers/net/wimax/i2400m/rx.c and + * tx.c. + * + * + * THE L3L4 PROTOCOL + * + * The term L3L4 refers to Layer 3 (the device), Layer 4 (the + * driver/host software). + * + * This is the control protocol used by the host to control the i2400m + * device (scan, connect, disconnect...). This is sent to / received + * as control frames. These frames consist of a header and zero or + * more TLVs with information. We call each control frame a "message". + * + * Each message is composed of: + * + * HEADER + * [TLV0 + PAYLOAD0] + * [TLV1 + PAYLOAD1] + * [...] + * [TLVN + PAYLOADN] + * + * The HEADER is defined by 'struct i2400m_l3l4_hdr'. The payloads are + * defined by a TLV structure (Type Length Value) which is a 'header' + * (struct i2400m_tlv_hdr) and then the payload. + * + * All integers are represented as Little Endian. + * + * - REQUESTS AND EVENTS + * + * The requests can be clasified as follows: + * + * COMMAND: implies a request from the host to the device requesting + * an action being performed. The device will reply with a + * message (with the same type as the command), status and + * no (TLV) payload. Execution of a command might cause + * events (of different type) to be sent later on as + * device's state changes. + * + * GET/SET: similar to COMMAND, but will not cause other + * EVENTs. The reply, in the case of GET, will contain + * TLVs with the requested information. + * + * EVENT: asynchronous messages sent from the device, maybe as a + * consequence of previous COMMANDs but disassociated from + * them. + * + * Only one request might be pending at the same time (ie: don't + * parallelize nor post another GET request before the previous + * COMMAND has been acknowledged with it's corresponding reply by the + * device). + * + * The different requests and their formats are described below: + * + * I2400M_MT_* Message types + * I2400M_MS_* Message status (for replies, events) + * i2400m_tlv_* TLVs + * + * data types are named 'struct i2400m_msg_OPNAME', OPNAME matching the + * operation. + */ + +#ifndef __LINUX__WIMAX__I2400M_H__ +#define __LINUX__WIMAX__I2400M_H__ + +#include <linux/types.h> +#include <linux/if_ether.h> + +/* + * Host Device Interface (HDI) common to all busses + */ + +/* Boot-mode (firmware upload mode) commands */ + +/* Header for the firmware file */ +struct i2400m_bcf_hdr { + __le32 module_type; + __le32 header_len; + __le32 header_version; + __le32 module_id; + __le32 module_vendor; + __le32 date; /* BCD YYYMMDD */ + __le32 size; /* in dwords */ + __le32 key_size; /* in dwords */ + __le32 modulus_size; /* in dwords */ + __le32 exponent_size; /* in dwords */ + __u8 reserved[88]; +} __attribute__ ((packed)); + +/* Boot mode opcodes */ +enum i2400m_brh_opcode { + I2400M_BRH_READ = 1, + I2400M_BRH_WRITE = 2, + I2400M_BRH_JUMP = 3, + I2400M_BRH_SIGNED_JUMP = 8, + I2400M_BRH_HASH_PAYLOAD_ONLY = 9, +}; + +/* Boot mode command masks and stuff */ +enum i2400m_brh { + I2400M_BRH_SIGNATURE = 0xcbbc0000, + I2400M_BRH_SIGNATURE_MASK = 0xffff0000, + I2400M_BRH_SIGNATURE_SHIFT = 16, + I2400M_BRH_OPCODE_MASK = 0x0000000f, + I2400M_BRH_RESPONSE_MASK = 0x000000f0, + I2400M_BRH_RESPONSE_SHIFT = 4, + I2400M_BRH_DIRECT_ACCESS = 0x00000400, + I2400M_BRH_RESPONSE_REQUIRED = 0x00000200, + I2400M_BRH_USE_CHECKSUM = 0x00000100, +}; + + +/** + * i2400m_bootrom_header - Header for a boot-mode command + * + * @cmd: the above command descriptor + * @target_addr: where on the device memory should the action be performed. + * @data_size: for read/write, amount of data to be read/written + * @block_checksum: checksum value (if applicable) + * @payload: the beginning of data attached to this header + */ +struct i2400m_bootrom_header { + __le32 command; /* Compose with enum i2400_brh */ + __le32 target_addr; + __le32 data_size; + __le32 block_checksum; + char payload[0]; +} __attribute__ ((packed)); + + +/* + * Data / control protocol + */ + +/* Packet types for the host-device interface */ +enum i2400m_pt { + I2400M_PT_DATA = 0, + I2400M_PT_CTRL, + I2400M_PT_TRACE, /* For device debug */ + I2400M_PT_RESET_WARM, /* device reset */ + I2400M_PT_RESET_COLD, /* USB[transport] reset, like reconnect */ + I2400M_PT_EDATA, /* Extended RX data */ + I2400M_PT_ILLEGAL +}; + + +/* + * Payload for a data packet + * + * This is prefixed to each and every outgoing DATA type. + */ +struct i2400m_pl_data_hdr { + __le32 reserved; +} __attribute__((packed)); + + +/* + * Payload for an extended data packet + * + * New in fw v1.4 + * + * @reorder: if this payload has to be reorder or not (and how) + * @cs: the type of data in the packet, as defined per (802.16e + * T11.13.19.1). Currently only 2 (IPv4 packet) supported. + * + * This is prefixed to each and every INCOMING DATA packet. + */ +struct i2400m_pl_edata_hdr { + __le32 reorder; /* bits defined in i2400m_ro */ + __u8 cs; + __u8 reserved[11]; +} __attribute__((packed)); + +enum i2400m_cs { + I2400M_CS_IPV4_0 = 0, + I2400M_CS_IPV4 = 2, +}; + +enum i2400m_ro { + I2400M_RO_NEEDED = 0x01, + I2400M_RO_TYPE = 0x03, + I2400M_RO_TYPE_SHIFT = 1, + I2400M_RO_CIN = 0x0f, + I2400M_RO_CIN_SHIFT = 4, + I2400M_RO_FBN = 0x07ff, + I2400M_RO_FBN_SHIFT = 8, + I2400M_RO_SN = 0x07ff, + I2400M_RO_SN_SHIFT = 21, +}; + +enum i2400m_ro_type { + I2400M_RO_TYPE_RESET = 0, + I2400M_RO_TYPE_PACKET, + I2400M_RO_TYPE_WS, + I2400M_RO_TYPE_PACKET_WS, +}; + + +/* Misc constants */ +enum { + I2400M_PL_ALIGN = 16, /* Payload data size alignment */ + I2400M_PL_SIZE_MAX = 0x3EFF, + I2400M_MAX_PLS_IN_MSG = 60, + /* protocol barkers: sync sequences; for notifications they + * are sent in groups of four. */ + I2400M_H2D_PREVIEW_BARKER = 0xcafe900d, + I2400M_COLD_RESET_BARKER = 0xc01dc01d, + I2400M_WARM_RESET_BARKER = 0x50f750f7, + I2400M_NBOOT_BARKER = 0xdeadbeef, + I2400M_SBOOT_BARKER = 0x0ff1c1a1, + I2400M_SBOOT_BARKER_6050 = 0x80000001, + I2400M_ACK_BARKER = 0xfeedbabe, + I2400M_D2H_MSG_BARKER = 0xbeefbabe, +}; + + +/* + * Hardware payload descriptor + * + * Bitfields encoded in a struct to enforce typing semantics. + * + * Look in rx.c and tx.c for a full description of the format. + */ +struct i2400m_pld { + __le32 val; +} __attribute__ ((packed)); + +#define I2400M_PLD_SIZE_MASK 0x00003fff +#define I2400M_PLD_TYPE_SHIFT 16 +#define I2400M_PLD_TYPE_MASK 0x000f0000 + +/* + * Header for a TX message or RX message + * + * @barker: preamble + * @size: used for management of the FIFO queue buffer; before + * sending, this is converted to be a real preamble. This + * indicates the real size of the TX message that starts at this + * point. If the highest bit is set, then this message is to be + * skipped. + * @sequence: sequence number of this message + * @offset: offset where the message itself starts -- see the comments + * in the file header about message header and payload descriptor + * alignment. + * @num_pls: number of payloads in this message + * @padding: amount of padding bytes at the end of the message to make + * it be of block-size aligned + * + * Look in rx.c and tx.c for a full description of the format. + */ +struct i2400m_msg_hdr { + union { + __le32 barker; + __u32 size; /* same size type as barker!! */ + }; + union { + __le32 sequence; + __u32 offset; /* same size type as barker!! */ + }; + __le16 num_pls; + __le16 rsv1; + __le16 padding; + __le16 rsv2; + struct i2400m_pld pld[0]; +} __attribute__ ((packed)); + + + +/* + * L3/L4 control protocol + */ + +enum { + /* Interface version */ + I2400M_L3L4_VERSION = 0x0100, +}; + +/* Message types */ +enum i2400m_mt { + I2400M_MT_RESERVED = 0x0000, + I2400M_MT_INVALID = 0xffff, + I2400M_MT_REPORT_MASK = 0x8000, + + I2400M_MT_GET_SCAN_RESULT = 0x4202, + I2400M_MT_SET_SCAN_PARAM = 0x4402, + I2400M_MT_CMD_RF_CONTROL = 0x4602, + I2400M_MT_CMD_SCAN = 0x4603, + I2400M_MT_CMD_CONNECT = 0x4604, + I2400M_MT_CMD_DISCONNECT = 0x4605, + I2400M_MT_CMD_EXIT_IDLE = 0x4606, + I2400M_MT_GET_LM_VERSION = 0x5201, + I2400M_MT_GET_DEVICE_INFO = 0x5202, + I2400M_MT_GET_LINK_STATUS = 0x5203, + I2400M_MT_GET_STATISTICS = 0x5204, + I2400M_MT_GET_STATE = 0x5205, + I2400M_MT_GET_MEDIA_STATUS = 0x5206, + I2400M_MT_SET_INIT_CONFIG = 0x5404, + I2400M_MT_CMD_INIT = 0x5601, + I2400M_MT_CMD_TERMINATE = 0x5602, + I2400M_MT_CMD_MODE_OF_OP = 0x5603, + I2400M_MT_CMD_RESET_DEVICE = 0x5604, + I2400M_MT_CMD_MONITOR_CONTROL = 0x5605, + I2400M_MT_CMD_ENTER_POWERSAVE = 0x5606, + I2400M_MT_GET_TLS_OPERATION_RESULT = 0x6201, + I2400M_MT_SET_EAP_SUCCESS = 0x6402, + I2400M_MT_SET_EAP_FAIL = 0x6403, + I2400M_MT_SET_EAP_KEY = 0x6404, + I2400M_MT_CMD_SEND_EAP_RESPONSE = 0x6602, + I2400M_MT_REPORT_SCAN_RESULT = 0xc002, + I2400M_MT_REPORT_STATE = 0xd002, + I2400M_MT_REPORT_POWERSAVE_READY = 0xd005, + I2400M_MT_REPORT_EAP_REQUEST = 0xe002, + I2400M_MT_REPORT_EAP_RESTART = 0xe003, + I2400M_MT_REPORT_ALT_ACCEPT = 0xe004, + I2400M_MT_REPORT_KEY_REQUEST = 0xe005, +}; + + +/* + * Message Ack Status codes + * + * When a message is replied-to, this status is reported. + */ +enum i2400m_ms { + I2400M_MS_DONE_OK = 0, + I2400M_MS_DONE_IN_PROGRESS = 1, + I2400M_MS_INVALID_OP = 2, + I2400M_MS_BAD_STATE = 3, + I2400M_MS_ILLEGAL_VALUE = 4, + I2400M_MS_MISSING_PARAMS = 5, + I2400M_MS_VERSION_ERROR = 6, + I2400M_MS_ACCESSIBILITY_ERROR = 7, + I2400M_MS_BUSY = 8, + I2400M_MS_CORRUPTED_TLV = 9, + I2400M_MS_UNINITIALIZED = 10, + I2400M_MS_UNKNOWN_ERROR = 11, + I2400M_MS_PRODUCTION_ERROR = 12, + I2400M_MS_NO_RF = 13, + I2400M_MS_NOT_READY_FOR_POWERSAVE = 14, + I2400M_MS_THERMAL_CRITICAL = 15, + I2400M_MS_MAX +}; + + +/** + * i2400m_tlv - enumeration of the different types of TLVs + * + * TLVs stand for type-length-value and are the header for a payload + * composed of almost anything. Each payload has a type assigned + * and a length. + */ +enum i2400m_tlv { + I2400M_TLV_L4_MESSAGE_VERSIONS = 129, + I2400M_TLV_SYSTEM_STATE = 141, + I2400M_TLV_MEDIA_STATUS = 161, + I2400M_TLV_RF_OPERATION = 162, + I2400M_TLV_RF_STATUS = 163, + I2400M_TLV_DEVICE_RESET_TYPE = 132, + I2400M_TLV_CONFIG_IDLE_PARAMETERS = 601, + I2400M_TLV_CONFIG_IDLE_TIMEOUT = 611, + I2400M_TLV_CONFIG_D2H_DATA_FORMAT = 614, + I2400M_TLV_CONFIG_DL_HOST_REORDER = 615, +}; + + +struct i2400m_tlv_hdr { + __le16 type; + __le16 length; /* payload's */ + __u8 pl[0]; +} __attribute__((packed)); + + +struct i2400m_l3l4_hdr { + __le16 type; + __le16 length; /* payload's */ + __le16 version; + __le16 resv1; + __le16 status; + __le16 resv2; + struct i2400m_tlv_hdr pl[0]; +} __attribute__((packed)); + + +/** + * i2400m_system_state - different states of the device + */ +enum i2400m_system_state { + I2400M_SS_UNINITIALIZED = 1, + I2400M_SS_INIT, + I2400M_SS_READY, + I2400M_SS_SCAN, + I2400M_SS_STANDBY, + I2400M_SS_CONNECTING, + I2400M_SS_WIMAX_CONNECTED, + I2400M_SS_DATA_PATH_CONNECTED, + I2400M_SS_IDLE, + I2400M_SS_DISCONNECTING, + I2400M_SS_OUT_OF_ZONE, + I2400M_SS_SLEEPACTIVE, + I2400M_SS_PRODUCTION, + I2400M_SS_CONFIG, + I2400M_SS_RF_OFF, + I2400M_SS_RF_SHUTDOWN, + I2400M_SS_DEVICE_DISCONNECT, + I2400M_SS_MAX, +}; + + +/** + * i2400m_tlv_system_state - report on the state of the system + * + * @state: see enum i2400m_system_state + */ +struct i2400m_tlv_system_state { + struct i2400m_tlv_hdr hdr; + __le32 state; +} __attribute__((packed)); + + +struct i2400m_tlv_l4_message_versions { + struct i2400m_tlv_hdr hdr; + __le16 major; + __le16 minor; + __le16 branch; + __le16 reserved; +} __attribute__((packed)); + + +struct i2400m_tlv_detailed_device_info { + struct i2400m_tlv_hdr hdr; + __u8 reserved1[400]; + __u8 mac_address[ETH_ALEN]; + __u8 reserved2[2]; +} __attribute__((packed)); + + +enum i2400m_rf_switch_status { + I2400M_RF_SWITCH_ON = 1, + I2400M_RF_SWITCH_OFF = 2, +}; + +struct i2400m_tlv_rf_switches_status { + struct i2400m_tlv_hdr hdr; + __u8 sw_rf_switch; /* 1 ON, 2 OFF */ + __u8 hw_rf_switch; /* 1 ON, 2 OFF */ + __u8 reserved[2]; +} __attribute__((packed)); + + +enum { + i2400m_rf_operation_on = 1, + i2400m_rf_operation_off = 2 +}; + +struct i2400m_tlv_rf_operation { + struct i2400m_tlv_hdr hdr; + __le32 status; /* 1 ON, 2 OFF */ +} __attribute__((packed)); + + +enum i2400m_tlv_reset_type { + I2400M_RESET_TYPE_COLD = 1, + I2400M_RESET_TYPE_WARM +}; + +struct i2400m_tlv_device_reset_type { + struct i2400m_tlv_hdr hdr; + __le32 reset_type; +} __attribute__((packed)); + + +struct i2400m_tlv_config_idle_parameters { + struct i2400m_tlv_hdr hdr; + __le32 idle_timeout; /* 100 to 300000 ms [5min], 100 increments + * 0 disabled */ + __le32 idle_paging_interval; /* frames */ +} __attribute__((packed)); + + +enum i2400m_media_status { + I2400M_MEDIA_STATUS_LINK_UP = 1, + I2400M_MEDIA_STATUS_LINK_DOWN, + I2400M_MEDIA_STATUS_LINK_RENEW, +}; + +struct i2400m_tlv_media_status { + struct i2400m_tlv_hdr hdr; + __le32 media_status; +} __attribute__((packed)); + + +/* New in v1.4 */ +struct i2400m_tlv_config_idle_timeout { + struct i2400m_tlv_hdr hdr; + __le32 timeout; /* 100 to 300000 ms [5min], 100 increments + * 0 disabled */ +} __attribute__((packed)); + +/* New in v1.4 -- for backward compat, will be removed */ +struct i2400m_tlv_config_d2h_data_format { + struct i2400m_tlv_hdr hdr; + __u8 format; /* 0 old format, 1 enhanced */ + __u8 reserved[3]; +} __attribute__((packed)); + +/* New in v1.4 */ +struct i2400m_tlv_config_dl_host_reorder { + struct i2400m_tlv_hdr hdr; + __u8 reorder; /* 0 disabled, 1 enabled */ + __u8 reserved[3]; +} __attribute__((packed)); + + +#endif /* #ifndef __LINUX__WIMAX__I2400M_H__ */ |