diff options
Diffstat (limited to 'kernel/time/hrtimer.c')
| -rw-r--r-- | kernel/time/hrtimer.c | 699 |
1 files changed, 325 insertions, 374 deletions
diff --git a/kernel/time/hrtimer.c b/kernel/time/hrtimer.c index 93ef7190b..5c7ae4b64 100644 --- a/kernel/time/hrtimer.c +++ b/kernel/time/hrtimer.c @@ -66,33 +66,29 @@ */ DEFINE_PER_CPU(struct hrtimer_cpu_base, hrtimer_bases) = { - .lock = __RAW_SPIN_LOCK_UNLOCKED(hrtimer_bases.lock), + .seq = SEQCNT_ZERO(hrtimer_bases.seq), .clock_base = { { .index = HRTIMER_BASE_MONOTONIC, .clockid = CLOCK_MONOTONIC, .get_time = &ktime_get, - .resolution = KTIME_LOW_RES, }, { .index = HRTIMER_BASE_REALTIME, .clockid = CLOCK_REALTIME, .get_time = &ktime_get_real, - .resolution = KTIME_LOW_RES, }, { .index = HRTIMER_BASE_BOOTTIME, .clockid = CLOCK_BOOTTIME, .get_time = &ktime_get_boottime, - .resolution = KTIME_LOW_RES, }, { .index = HRTIMER_BASE_TAI, .clockid = CLOCK_TAI, .get_time = &ktime_get_clocktai, - .resolution = KTIME_LOW_RES, }, } }; @@ -109,27 +105,6 @@ static inline int hrtimer_clockid_to_base(clockid_t clock_id) return hrtimer_clock_to_base_table[clock_id]; } - -/* - * Get the coarse grained time at the softirq based on xtime and - * wall_to_monotonic. - */ -static void hrtimer_get_softirq_time(struct hrtimer_cpu_base *base) -{ - ktime_t xtim, mono, boot, tai; - ktime_t off_real, off_boot, off_tai; - - mono = ktime_get_update_offsets_tick(&off_real, &off_boot, &off_tai); - boot = ktime_add(mono, off_boot); - xtim = ktime_add(mono, off_real); - tai = ktime_add(mono, off_tai); - - base->clock_base[HRTIMER_BASE_REALTIME].softirq_time = xtim; - base->clock_base[HRTIMER_BASE_MONOTONIC].softirq_time = mono; - base->clock_base[HRTIMER_BASE_BOOTTIME].softirq_time = boot; - base->clock_base[HRTIMER_BASE_TAI].softirq_time = tai; -} - /* * Functions and macros which are different for UP/SMP systems are kept in a * single place @@ -137,6 +112,18 @@ static void hrtimer_get_softirq_time(struct hrtimer_cpu_base *base) #ifdef CONFIG_SMP /* + * We require the migration_base for lock_hrtimer_base()/switch_hrtimer_base() + * such that hrtimer_callback_running() can unconditionally dereference + * timer->base->cpu_base + */ +static struct hrtimer_cpu_base migration_cpu_base = { + .seq = SEQCNT_ZERO(migration_cpu_base), + .clock_base = { { .cpu_base = &migration_cpu_base, }, }, +}; + +#define migration_base migration_cpu_base.clock_base[0] + +/* * We are using hashed locking: holding per_cpu(hrtimer_bases)[n].lock * means that all timers which are tied to this base via timer->base are * locked, and the base itself is locked too. @@ -145,8 +132,8 @@ static void hrtimer_get_softirq_time(struct hrtimer_cpu_base *base) * be found on the lists/queues. * * When the timer's base is locked, and the timer removed from list, it is - * possible to set timer->base = NULL and drop the lock: the timer remains - * locked. + * possible to set timer->base = &migration_base and drop the lock: the timer + * remains locked. */ static struct hrtimer_clock_base *lock_hrtimer_base(const struct hrtimer *timer, @@ -156,7 +143,7 @@ struct hrtimer_clock_base *lock_hrtimer_base(const struct hrtimer *timer, for (;;) { base = timer->base; - if (likely(base != NULL)) { + if (likely(base != &migration_base)) { raw_spin_lock_irqsave(&base->cpu_base->lock, *flags); if (likely(base == timer->base)) return base; @@ -190,6 +177,24 @@ hrtimer_check_target(struct hrtimer *timer, struct hrtimer_clock_base *new_base) #endif } +#if defined(CONFIG_SMP) && defined(CONFIG_NO_HZ_COMMON) +static inline +struct hrtimer_cpu_base *get_target_base(struct hrtimer_cpu_base *base, + int pinned) +{ + if (pinned || !base->migration_enabled) + return this_cpu_ptr(&hrtimer_bases); + return &per_cpu(hrtimer_bases, get_nohz_timer_target()); +} +#else +static inline +struct hrtimer_cpu_base *get_target_base(struct hrtimer_cpu_base *base, + int pinned) +{ + return this_cpu_ptr(&hrtimer_bases); +} +#endif + /* * Switch the timer base to the current CPU when possible. */ @@ -197,14 +202,13 @@ static inline struct hrtimer_clock_base * switch_hrtimer_base(struct hrtimer *timer, struct hrtimer_clock_base *base, int pinned) { + struct hrtimer_cpu_base *new_cpu_base, *this_base; struct hrtimer_clock_base *new_base; - struct hrtimer_cpu_base *new_cpu_base; - int this_cpu = smp_processor_id(); - int cpu = get_nohz_timer_target(pinned); int basenum = base->index; + this_base = this_cpu_ptr(&hrtimer_bases); + new_cpu_base = get_target_base(this_base, pinned); again: - new_cpu_base = &per_cpu(hrtimer_bases, cpu); new_base = &new_cpu_base->clock_base[basenum]; if (base != new_base) { @@ -220,22 +224,24 @@ again: if (unlikely(hrtimer_callback_running(timer))) return base; - /* See the comment in lock_timer_base() */ - timer->base = NULL; + /* See the comment in lock_hrtimer_base() */ + timer->base = &migration_base; raw_spin_unlock(&base->cpu_base->lock); raw_spin_lock(&new_base->cpu_base->lock); - if (cpu != this_cpu && hrtimer_check_target(timer, new_base)) { - cpu = this_cpu; + if (new_cpu_base != this_base && + hrtimer_check_target(timer, new_base)) { raw_spin_unlock(&new_base->cpu_base->lock); raw_spin_lock(&base->cpu_base->lock); + new_cpu_base = this_base; timer->base = base; goto again; } timer->base = new_base; } else { - if (cpu != this_cpu && hrtimer_check_target(timer, new_base)) { - cpu = this_cpu; + if (new_cpu_base != this_base && + hrtimer_check_target(timer, new_base)) { + new_cpu_base = this_base; goto again; } } @@ -443,24 +449,35 @@ static inline void debug_deactivate(struct hrtimer *timer) } #if defined(CONFIG_NO_HZ_COMMON) || defined(CONFIG_HIGH_RES_TIMERS) +static inline void hrtimer_update_next_timer(struct hrtimer_cpu_base *cpu_base, + struct hrtimer *timer) +{ +#ifdef CONFIG_HIGH_RES_TIMERS + cpu_base->next_timer = timer; +#endif +} + static ktime_t __hrtimer_get_next_event(struct hrtimer_cpu_base *cpu_base) { struct hrtimer_clock_base *base = cpu_base->clock_base; ktime_t expires, expires_next = { .tv64 = KTIME_MAX }; - int i; + unsigned int active = cpu_base->active_bases; - for (i = 0; i < HRTIMER_MAX_CLOCK_BASES; i++, base++) { + hrtimer_update_next_timer(cpu_base, NULL); + for (; active; base++, active >>= 1) { struct timerqueue_node *next; struct hrtimer *timer; - next = timerqueue_getnext(&base->active); - if (!next) + if (!(active & 0x01)) continue; + next = timerqueue_getnext(&base->active); timer = container_of(next, struct hrtimer, node); expires = ktime_sub(hrtimer_get_expires(timer), base->offset); - if (expires.tv64 < expires_next.tv64) + if (expires.tv64 < expires_next.tv64) { expires_next = expires; + hrtimer_update_next_timer(cpu_base, timer); + } } /* * clock_was_set() might have changed base->offset of any of @@ -473,6 +490,16 @@ static ktime_t __hrtimer_get_next_event(struct hrtimer_cpu_base *cpu_base) } #endif +static inline ktime_t hrtimer_update_base(struct hrtimer_cpu_base *base) +{ + ktime_t *offs_real = &base->clock_base[HRTIMER_BASE_REALTIME].offset; + ktime_t *offs_boot = &base->clock_base[HRTIMER_BASE_BOOTTIME].offset; + ktime_t *offs_tai = &base->clock_base[HRTIMER_BASE_TAI].offset; + + return ktime_get_update_offsets_now(&base->clock_was_set_seq, + offs_real, offs_boot, offs_tai); +} + /* High resolution timer related functions */ #ifdef CONFIG_HIGH_RES_TIMERS @@ -480,6 +507,8 @@ static ktime_t __hrtimer_get_next_event(struct hrtimer_cpu_base *cpu_base) * High resolution timer enabled ? */ static int hrtimer_hres_enabled __read_mostly = 1; +unsigned int hrtimer_resolution __read_mostly = LOW_RES_NSEC; +EXPORT_SYMBOL_GPL(hrtimer_resolution); /* * Enable / Disable high resolution mode @@ -508,9 +537,14 @@ static inline int hrtimer_is_hres_enabled(void) /* * Is the high resolution mode active ? */ +static inline int __hrtimer_hres_active(struct hrtimer_cpu_base *cpu_base) +{ + return cpu_base->hres_active; +} + static inline int hrtimer_hres_active(void) { - return __this_cpu_read(hrtimer_bases.hres_active); + return __hrtimer_hres_active(this_cpu_ptr(&hrtimer_bases)); } /* @@ -521,7 +555,12 @@ static inline int hrtimer_hres_active(void) static void hrtimer_force_reprogram(struct hrtimer_cpu_base *cpu_base, int skip_equal) { - ktime_t expires_next = __hrtimer_get_next_event(cpu_base); + ktime_t expires_next; + + if (!cpu_base->hres_active) + return; + + expires_next = __hrtimer_get_next_event(cpu_base); if (skip_equal && expires_next.tv64 == cpu_base->expires_next.tv64) return; @@ -545,63 +584,53 @@ hrtimer_force_reprogram(struct hrtimer_cpu_base *cpu_base, int skip_equal) if (cpu_base->hang_detected) return; - if (cpu_base->expires_next.tv64 != KTIME_MAX) - tick_program_event(cpu_base->expires_next, 1); + tick_program_event(cpu_base->expires_next, 1); } /* - * Shared reprogramming for clock_realtime and clock_monotonic - * * When a timer is enqueued and expires earlier than the already enqueued * timers, we have to check, whether it expires earlier than the timer for * which the clock event device was armed. * - * Note, that in case the state has HRTIMER_STATE_CALLBACK set, no reprogramming - * and no expiry check happens. The timer gets enqueued into the rbtree. The - * reprogramming and expiry check is done in the hrtimer_interrupt or in the - * softirq. - * * Called with interrupts disabled and base->cpu_base.lock held */ -static int hrtimer_reprogram(struct hrtimer *timer, - struct hrtimer_clock_base *base) +static void hrtimer_reprogram(struct hrtimer *timer, + struct hrtimer_clock_base *base) { struct hrtimer_cpu_base *cpu_base = this_cpu_ptr(&hrtimer_bases); ktime_t expires = ktime_sub(hrtimer_get_expires(timer), base->offset); - int res; WARN_ON_ONCE(hrtimer_get_expires_tv64(timer) < 0); /* - * When the callback is running, we do not reprogram the clock event - * device. The timer callback is either running on a different CPU or - * the callback is executed in the hrtimer_interrupt context. The - * reprogramming is handled either by the softirq, which called the - * callback or at the end of the hrtimer_interrupt. + * If the timer is not on the current cpu, we cannot reprogram + * the other cpus clock event device. */ - if (hrtimer_callback_running(timer)) - return 0; + if (base->cpu_base != cpu_base) + return; + + /* + * If the hrtimer interrupt is running, then it will + * reevaluate the clock bases and reprogram the clock event + * device. The callbacks are always executed in hard interrupt + * context so we don't need an extra check for a running + * callback. + */ + if (cpu_base->in_hrtirq) + return; /* * CLOCK_REALTIME timer might be requested with an absolute - * expiry time which is less than base->offset. Nothing wrong - * about that, just avoid to call into the tick code, which - * has now objections against negative expiry values. + * expiry time which is less than base->offset. Set it to 0. */ if (expires.tv64 < 0) - return -ETIME; + expires.tv64 = 0; if (expires.tv64 >= cpu_base->expires_next.tv64) - return 0; + return; - /* - * When the target cpu of the timer is currently executing - * hrtimer_interrupt(), then we do not touch the clock event - * device. hrtimer_interrupt() will reevaluate all clock bases - * before reprogramming the device. - */ - if (cpu_base->in_hrtirq) - return 0; + /* Update the pointer to the next expiring timer */ + cpu_base->next_timer = timer; /* * If a hang was detected in the last timer interrupt then we @@ -610,15 +639,14 @@ static int hrtimer_reprogram(struct hrtimer *timer, * to make progress. */ if (cpu_base->hang_detected) - return 0; + return; /* - * Clockevents returns -ETIME, when the event was in the past. + * Program the timer hardware. We enforce the expiry for + * events which are already in the past. */ - res = tick_program_event(expires, 0); - if (!IS_ERR_VALUE(res)) - cpu_base->expires_next = expires; - return res; + cpu_base->expires_next = expires; + tick_program_event(expires, 1); } /* @@ -630,15 +658,6 @@ static inline void hrtimer_init_hres(struct hrtimer_cpu_base *base) base->hres_active = 0; } -static inline ktime_t hrtimer_update_base(struct hrtimer_cpu_base *base) -{ - ktime_t *offs_real = &base->clock_base[HRTIMER_BASE_REALTIME].offset; - ktime_t *offs_boot = &base->clock_base[HRTIMER_BASE_BOOTTIME].offset; - ktime_t *offs_tai = &base->clock_base[HRTIMER_BASE_TAI].offset; - - return ktime_get_update_offsets_now(offs_real, offs_boot, offs_tai); -} - /* * Retrigger next event is called after clock was set * @@ -648,7 +667,7 @@ static void retrigger_next_event(void *arg) { struct hrtimer_cpu_base *base = this_cpu_ptr(&hrtimer_bases); - if (!hrtimer_hres_active()) + if (!base->hres_active) return; raw_spin_lock(&base->lock); @@ -662,29 +681,19 @@ static void retrigger_next_event(void *arg) */ static int hrtimer_switch_to_hres(void) { - int i, cpu = smp_processor_id(); - struct hrtimer_cpu_base *base = &per_cpu(hrtimer_bases, cpu); - unsigned long flags; - - if (base->hres_active) - return 1; - - local_irq_save(flags); + struct hrtimer_cpu_base *base = this_cpu_ptr(&hrtimer_bases); if (tick_init_highres()) { - local_irq_restore(flags); printk(KERN_WARNING "Could not switch to high resolution " - "mode on CPU %d\n", cpu); + "mode on CPU %d\n", base->cpu); return 0; } base->hres_active = 1; - for (i = 0; i < HRTIMER_MAX_CLOCK_BASES; i++) - base->clock_base[i].resolution = KTIME_HIGH_RES; + hrtimer_resolution = HIGH_RES_NSEC; tick_setup_sched_timer(); /* "Retrigger" the interrupt to get things going */ retrigger_next_event(NULL); - local_irq_restore(flags); return 1; } @@ -706,6 +715,7 @@ void clock_was_set_delayed(void) #else +static inline int __hrtimer_hres_active(struct hrtimer_cpu_base *b) { return 0; } static inline int hrtimer_hres_active(void) { return 0; } static inline int hrtimer_is_hres_enabled(void) { return 0; } static inline int hrtimer_switch_to_hres(void) { return 0; } @@ -803,6 +813,14 @@ void unlock_hrtimer_base(const struct hrtimer *timer, unsigned long *flags) * * Forward the timer expiry so it will expire in the future. * Returns the number of overruns. + * + * Can be safely called from the callback function of @timer. If + * called from other contexts @timer must neither be enqueued nor + * running the callback and the caller needs to take care of + * serialization. + * + * Note: This only updates the timer expiry value and does not requeue + * the timer. */ u64 hrtimer_forward(struct hrtimer *timer, ktime_t now, ktime_t interval) { @@ -814,8 +832,11 @@ u64 hrtimer_forward(struct hrtimer *timer, ktime_t now, ktime_t interval) if (delta.tv64 < 0) return 0; - if (interval.tv64 < timer->base->resolution.tv64) - interval.tv64 = timer->base->resolution.tv64; + if (WARN_ON(timer->state & HRTIMER_STATE_ENQUEUED)) + return 0; + + if (interval.tv64 < hrtimer_resolution) + interval.tv64 = hrtimer_resolution; if (unlikely(delta.tv64 >= interval.tv64)) { s64 incr = ktime_to_ns(interval); @@ -849,16 +870,11 @@ static int enqueue_hrtimer(struct hrtimer *timer, { debug_activate(timer); - timerqueue_add(&base->active, &timer->node); base->cpu_base->active_bases |= 1 << base->index; - /* - * HRTIMER_STATE_ENQUEUED is or'ed to the current state to preserve the - * state of a possibly running callback. - */ - timer->state |= HRTIMER_STATE_ENQUEUED; + timer->state = HRTIMER_STATE_ENQUEUED; - return (&timer->node == base->active.next); + return timerqueue_add(&base->active, &timer->node); } /* @@ -875,39 +891,38 @@ static void __remove_hrtimer(struct hrtimer *timer, struct hrtimer_clock_base *base, unsigned long newstate, int reprogram) { - struct timerqueue_node *next_timer; - if (!(timer->state & HRTIMER_STATE_ENQUEUED)) - goto out; + struct hrtimer_cpu_base *cpu_base = base->cpu_base; + unsigned int state = timer->state; + + timer->state = newstate; + if (!(state & HRTIMER_STATE_ENQUEUED)) + return; + + if (!timerqueue_del(&base->active, &timer->node)) + cpu_base->active_bases &= ~(1 << base->index); - next_timer = timerqueue_getnext(&base->active); - timerqueue_del(&base->active, &timer->node); - if (&timer->node == next_timer) { #ifdef CONFIG_HIGH_RES_TIMERS - /* Reprogram the clock event device. if enabled */ - if (reprogram && hrtimer_hres_active()) { - ktime_t expires; - - expires = ktime_sub(hrtimer_get_expires(timer), - base->offset); - if (base->cpu_base->expires_next.tv64 == expires.tv64) - hrtimer_force_reprogram(base->cpu_base, 1); - } + /* + * Note: If reprogram is false we do not update + * cpu_base->next_timer. This happens when we remove the first + * timer on a remote cpu. No harm as we never dereference + * cpu_base->next_timer. So the worst thing what can happen is + * an superflous call to hrtimer_force_reprogram() on the + * remote cpu later on if the same timer gets enqueued again. + */ + if (reprogram && timer == cpu_base->next_timer) + hrtimer_force_reprogram(cpu_base, 1); #endif - } - if (!timerqueue_getnext(&base->active)) - base->cpu_base->active_bases &= ~(1 << base->index); -out: - timer->state = newstate; } /* * remove hrtimer, called with base lock held */ static inline int -remove_hrtimer(struct hrtimer *timer, struct hrtimer_clock_base *base) +remove_hrtimer(struct hrtimer *timer, struct hrtimer_clock_base *base, bool restart) { if (hrtimer_is_queued(timer)) { - unsigned long state; + unsigned long state = timer->state; int reprogram; /* @@ -921,30 +936,35 @@ remove_hrtimer(struct hrtimer *timer, struct hrtimer_clock_base *base) debug_deactivate(timer); timer_stats_hrtimer_clear_start_info(timer); reprogram = base->cpu_base == this_cpu_ptr(&hrtimer_bases); - /* - * We must preserve the CALLBACK state flag here, - * otherwise we could move the timer base in - * switch_hrtimer_base. - */ - state = timer->state & HRTIMER_STATE_CALLBACK; + + if (!restart) + state = HRTIMER_STATE_INACTIVE; + __remove_hrtimer(timer, base, state, reprogram); return 1; } return 0; } -int __hrtimer_start_range_ns(struct hrtimer *timer, ktime_t tim, - unsigned long delta_ns, const enum hrtimer_mode mode, - int wakeup) +/** + * hrtimer_start_range_ns - (re)start an hrtimer on the current CPU + * @timer: the timer to be added + * @tim: expiry time + * @delta_ns: "slack" range for the timer + * @mode: expiry mode: absolute (HRTIMER_MODE_ABS) or + * relative (HRTIMER_MODE_REL) + */ +void hrtimer_start_range_ns(struct hrtimer *timer, ktime_t tim, + unsigned long delta_ns, const enum hrtimer_mode mode) { struct hrtimer_clock_base *base, *new_base; unsigned long flags; - int ret, leftmost; + int leftmost; base = lock_hrtimer_base(timer, &flags); /* Remove an active timer from the queue: */ - ret = remove_hrtimer(timer, base); + remove_hrtimer(timer, base, true); if (mode & HRTIMER_MODE_REL) { tim = ktime_add_safe(tim, base->get_time()); @@ -956,7 +976,7 @@ int __hrtimer_start_range_ns(struct hrtimer *timer, ktime_t tim, * timeouts. This will go away with the GTOD framework. */ #ifdef CONFIG_TIME_LOW_RES - tim = ktime_add_safe(tim, base->resolution); + tim = ktime_add_safe(tim, ktime_set(0, hrtimer_resolution)); #endif } @@ -968,85 +988,25 @@ int __hrtimer_start_range_ns(struct hrtimer *timer, ktime_t tim, timer_stats_hrtimer_set_start_info(timer); leftmost = enqueue_hrtimer(timer, new_base); - - if (!leftmost) { - unlock_hrtimer_base(timer, &flags); - return ret; - } + if (!leftmost) + goto unlock; if (!hrtimer_is_hres_active(timer)) { /* * Kick to reschedule the next tick to handle the new timer * on dynticks target. */ - wake_up_nohz_cpu(new_base->cpu_base->cpu); - } else if (new_base->cpu_base == this_cpu_ptr(&hrtimer_bases) && - hrtimer_reprogram(timer, new_base)) { - /* - * Only allow reprogramming if the new base is on this CPU. - * (it might still be on another CPU if the timer was pending) - * - * XXX send_remote_softirq() ? - */ - if (wakeup) { - /* - * We need to drop cpu_base->lock to avoid a - * lock ordering issue vs. rq->lock. - */ - raw_spin_unlock(&new_base->cpu_base->lock); - raise_softirq_irqoff(HRTIMER_SOFTIRQ); - local_irq_restore(flags); - return ret; - } else { - __raise_softirq_irqoff(HRTIMER_SOFTIRQ); - } + if (new_base->cpu_base->nohz_active) + wake_up_nohz_cpu(new_base->cpu_base->cpu); + } else { + hrtimer_reprogram(timer, new_base); } - +unlock: unlock_hrtimer_base(timer, &flags); - - return ret; -} -EXPORT_SYMBOL_GPL(__hrtimer_start_range_ns); - -/** - * hrtimer_start_range_ns - (re)start an hrtimer on the current CPU - * @timer: the timer to be added - * @tim: expiry time - * @delta_ns: "slack" range for the timer - * @mode: expiry mode: absolute (HRTIMER_MODE_ABS) or - * relative (HRTIMER_MODE_REL) - * - * Returns: - * 0 on success - * 1 when the timer was active - */ -int hrtimer_start_range_ns(struct hrtimer *timer, ktime_t tim, - unsigned long delta_ns, const enum hrtimer_mode mode) -{ - return __hrtimer_start_range_ns(timer, tim, delta_ns, mode, 1); } EXPORT_SYMBOL_GPL(hrtimer_start_range_ns); /** - * hrtimer_start - (re)start an hrtimer on the current CPU - * @timer: the timer to be added - * @tim: expiry time - * @mode: expiry mode: absolute (HRTIMER_MODE_ABS) or - * relative (HRTIMER_MODE_REL) - * - * Returns: - * 0 on success - * 1 when the timer was active - */ -int -hrtimer_start(struct hrtimer *timer, ktime_t tim, const enum hrtimer_mode mode) -{ - return __hrtimer_start_range_ns(timer, tim, 0, mode, 1); -} -EXPORT_SYMBOL_GPL(hrtimer_start); - - -/** * hrtimer_try_to_cancel - try to deactivate a timer * @timer: hrtimer to stop * @@ -1062,10 +1022,19 @@ int hrtimer_try_to_cancel(struct hrtimer *timer) unsigned long flags; int ret = -1; + /* + * Check lockless first. If the timer is not active (neither + * enqueued nor running the callback, nothing to do here. The + * base lock does not serialize against a concurrent enqueue, + * so we can avoid taking it. + */ + if (!hrtimer_active(timer)) + return 0; + base = lock_hrtimer_base(timer, &flags); if (!hrtimer_callback_running(timer)) - ret = remove_hrtimer(timer, base); + ret = remove_hrtimer(timer, base, false); unlock_hrtimer_base(timer, &flags); @@ -1115,26 +1084,22 @@ EXPORT_SYMBOL_GPL(hrtimer_get_remaining); /** * hrtimer_get_next_event - get the time until next expiry event * - * Returns the delta to the next expiry event or KTIME_MAX if no timer - * is pending. + * Returns the next expiry time or KTIME_MAX if no timer is pending. */ -ktime_t hrtimer_get_next_event(void) +u64 hrtimer_get_next_event(void) { struct hrtimer_cpu_base *cpu_base = this_cpu_ptr(&hrtimer_bases); - ktime_t mindelta = { .tv64 = KTIME_MAX }; + u64 expires = KTIME_MAX; unsigned long flags; raw_spin_lock_irqsave(&cpu_base->lock, flags); - if (!hrtimer_hres_active()) - mindelta = ktime_sub(__hrtimer_get_next_event(cpu_base), - ktime_get()); + if (!__hrtimer_hres_active(cpu_base)) + expires = __hrtimer_get_next_event(cpu_base).tv64; raw_spin_unlock_irqrestore(&cpu_base->lock, flags); - if (mindelta.tv64 < 0) - mindelta.tv64 = 0; - return mindelta; + return expires; } #endif @@ -1176,37 +1141,73 @@ void hrtimer_init(struct hrtimer *timer, clockid_t clock_id, } EXPORT_SYMBOL_GPL(hrtimer_init); -/** - * hrtimer_get_res - get the timer resolution for a clock - * @which_clock: which clock to query - * @tp: pointer to timespec variable to store the resolution +/* + * A timer is active, when it is enqueued into the rbtree or the + * callback function is running or it's in the state of being migrated + * to another cpu. * - * Store the resolution of the clock selected by @which_clock in the - * variable pointed to by @tp. + * It is important for this function to not return a false negative. */ -int hrtimer_get_res(const clockid_t which_clock, struct timespec *tp) +bool hrtimer_active(const struct hrtimer *timer) { struct hrtimer_cpu_base *cpu_base; - int base = hrtimer_clockid_to_base(which_clock); + unsigned int seq; - cpu_base = raw_cpu_ptr(&hrtimer_bases); - *tp = ktime_to_timespec(cpu_base->clock_base[base].resolution); + do { + cpu_base = READ_ONCE(timer->base->cpu_base); + seq = raw_read_seqcount_begin(&cpu_base->seq); - return 0; + if (timer->state != HRTIMER_STATE_INACTIVE || + cpu_base->running == timer) + return true; + + } while (read_seqcount_retry(&cpu_base->seq, seq) || + cpu_base != READ_ONCE(timer->base->cpu_base)); + + return false; } -EXPORT_SYMBOL_GPL(hrtimer_get_res); +EXPORT_SYMBOL_GPL(hrtimer_active); -static void __run_hrtimer(struct hrtimer *timer, ktime_t *now) +/* + * The write_seqcount_barrier()s in __run_hrtimer() split the thing into 3 + * distinct sections: + * + * - queued: the timer is queued + * - callback: the timer is being ran + * - post: the timer is inactive or (re)queued + * + * On the read side we ensure we observe timer->state and cpu_base->running + * from the same section, if anything changed while we looked at it, we retry. + * This includes timer->base changing because sequence numbers alone are + * insufficient for that. + * + * The sequence numbers are required because otherwise we could still observe + * a false negative if the read side got smeared over multiple consequtive + * __run_hrtimer() invocations. + */ + +static void __run_hrtimer(struct hrtimer_cpu_base *cpu_base, + struct hrtimer_clock_base *base, + struct hrtimer *timer, ktime_t *now) { - struct hrtimer_clock_base *base = timer->base; - struct hrtimer_cpu_base *cpu_base = base->cpu_base; enum hrtimer_restart (*fn)(struct hrtimer *); int restart; - WARN_ON(!irqs_disabled()); + lockdep_assert_held(&cpu_base->lock); debug_deactivate(timer); - __remove_hrtimer(timer, base, HRTIMER_STATE_CALLBACK, 0); + cpu_base->running = timer; + + /* + * Separate the ->running assignment from the ->state assignment. + * + * As with a regular write barrier, this ensures the read side in + * hrtimer_active() cannot observe cpu_base->running == NULL && + * timer->state == INACTIVE. + */ + raw_write_seqcount_barrier(&cpu_base->seq); + + __remove_hrtimer(timer, base, HRTIMER_STATE_INACTIVE, 0); timer_stats_account_hrtimer(timer); fn = timer->function; @@ -1222,58 +1223,43 @@ static void __run_hrtimer(struct hrtimer *timer, ktime_t *now) raw_spin_lock(&cpu_base->lock); /* - * Note: We clear the CALLBACK bit after enqueue_hrtimer and + * Note: We clear the running state after enqueue_hrtimer and * we do not reprogramm the event hardware. Happens either in * hrtimer_start_range_ns() or in hrtimer_interrupt() + * + * Note: Because we dropped the cpu_base->lock above, + * hrtimer_start_range_ns() can have popped in and enqueued the timer + * for us already. */ - if (restart != HRTIMER_NORESTART) { - BUG_ON(timer->state != HRTIMER_STATE_CALLBACK); + if (restart != HRTIMER_NORESTART && + !(timer->state & HRTIMER_STATE_ENQUEUED)) enqueue_hrtimer(timer, base); - } - WARN_ON_ONCE(!(timer->state & HRTIMER_STATE_CALLBACK)); + /* + * Separate the ->running assignment from the ->state assignment. + * + * As with a regular write barrier, this ensures the read side in + * hrtimer_active() cannot observe cpu_base->running == NULL && + * timer->state == INACTIVE. + */ + raw_write_seqcount_barrier(&cpu_base->seq); - timer->state &= ~HRTIMER_STATE_CALLBACK; + WARN_ON_ONCE(cpu_base->running != timer); + cpu_base->running = NULL; } -#ifdef CONFIG_HIGH_RES_TIMERS - -/* - * High resolution timer interrupt - * Called with interrupts disabled - */ -void hrtimer_interrupt(struct clock_event_device *dev) +static void __hrtimer_run_queues(struct hrtimer_cpu_base *cpu_base, ktime_t now) { - struct hrtimer_cpu_base *cpu_base = this_cpu_ptr(&hrtimer_bases); - ktime_t expires_next, now, entry_time, delta; - int i, retries = 0; - - BUG_ON(!cpu_base->hres_active); - cpu_base->nr_events++; - dev->next_event.tv64 = KTIME_MAX; - - raw_spin_lock(&cpu_base->lock); - entry_time = now = hrtimer_update_base(cpu_base); -retry: - cpu_base->in_hrtirq = 1; - /* - * We set expires_next to KTIME_MAX here with cpu_base->lock - * held to prevent that a timer is enqueued in our queue via - * the migration code. This does not affect enqueueing of - * timers which run their callback and need to be requeued on - * this CPU. - */ - cpu_base->expires_next.tv64 = KTIME_MAX; + struct hrtimer_clock_base *base = cpu_base->clock_base; + unsigned int active = cpu_base->active_bases; - for (i = 0; i < HRTIMER_MAX_CLOCK_BASES; i++) { - struct hrtimer_clock_base *base; + for (; active; base++, active >>= 1) { struct timerqueue_node *node; ktime_t basenow; - if (!(cpu_base->active_bases & (1 << i))) + if (!(active & 0x01)) continue; - base = cpu_base->clock_base + i; basenow = ktime_add(now, base->offset); while ((node = timerqueue_getnext(&base->active))) { @@ -1296,9 +1282,42 @@ retry: if (basenow.tv64 < hrtimer_get_softexpires_tv64(timer)) break; - __run_hrtimer(timer, &basenow); + __run_hrtimer(cpu_base, base, timer, &basenow); } } +} + +#ifdef CONFIG_HIGH_RES_TIMERS + +/* + * High resolution timer interrupt + * Called with interrupts disabled + */ +void hrtimer_interrupt(struct clock_event_device *dev) +{ + struct hrtimer_cpu_base *cpu_base = this_cpu_ptr(&hrtimer_bases); + ktime_t expires_next, now, entry_time, delta; + int retries = 0; + + BUG_ON(!cpu_base->hres_active); + cpu_base->nr_events++; + dev->next_event.tv64 = KTIME_MAX; + + raw_spin_lock(&cpu_base->lock); + entry_time = now = hrtimer_update_base(cpu_base); +retry: + cpu_base->in_hrtirq = 1; + /* + * We set expires_next to KTIME_MAX here with cpu_base->lock + * held to prevent that a timer is enqueued in our queue via + * the migration code. This does not affect enqueueing of + * timers which run their callback and need to be requeued on + * this CPU. + */ + cpu_base->expires_next.tv64 = KTIME_MAX; + + __hrtimer_run_queues(cpu_base, now); + /* Reevaluate the clock bases for the next expiry */ expires_next = __hrtimer_get_next_event(cpu_base); /* @@ -1310,8 +1329,7 @@ retry: raw_spin_unlock(&cpu_base->lock); /* Reprogramming necessary ? */ - if (expires_next.tv64 == KTIME_MAX || - !tick_program_event(expires_next, 0)) { + if (!tick_program_event(expires_next, 0)) { cpu_base->hang_detected = 0; return; } @@ -1344,8 +1362,8 @@ retry: cpu_base->hang_detected = 1; raw_spin_unlock(&cpu_base->lock); delta = ktime_sub(now, entry_time); - if (delta.tv64 > cpu_base->max_hang_time.tv64) - cpu_base->max_hang_time = delta; + if ((unsigned int)delta.tv64 > cpu_base->max_hang_time) + cpu_base->max_hang_time = (unsigned int) delta.tv64; /* * Limit it to a sensible value as we enforce a longer * delay. Give the CPU at least 100ms to catch up. @@ -1363,7 +1381,7 @@ retry: * local version of hrtimer_peek_ahead_timers() called with interrupts * disabled. */ -static void __hrtimer_peek_ahead_timers(void) +static inline void __hrtimer_peek_ahead_timers(void) { struct tick_device *td; @@ -1375,29 +1393,6 @@ static void __hrtimer_peek_ahead_timers(void) hrtimer_interrupt(td->evtdev); } -/** - * hrtimer_peek_ahead_timers -- run soft-expired timers now - * - * hrtimer_peek_ahead_timers will peek at the timer queue of - * the current cpu and check if there are any timers for which - * the soft expires time has passed. If any such timers exist, - * they are run immediately and then removed from the timer queue. - * - */ -void hrtimer_peek_ahead_timers(void) -{ - unsigned long flags; - - local_irq_save(flags); - __hrtimer_peek_ahead_timers(); - local_irq_restore(flags); -} - -static void run_hrtimer_softirq(struct softirq_action *h) -{ - hrtimer_peek_ahead_timers(); -} - #else /* CONFIG_HIGH_RES_TIMERS */ static inline void __hrtimer_peek_ahead_timers(void) { } @@ -1405,66 +1400,32 @@ static inline void __hrtimer_peek_ahead_timers(void) { } #endif /* !CONFIG_HIGH_RES_TIMERS */ /* - * Called from timer softirq every jiffy, expire hrtimers: - * - * For HRT its the fall back code to run the softirq in the timer - * softirq context in case the hrtimer initialization failed or has - * not been done yet. + * Called from run_local_timers in hardirq context every jiffy */ -void hrtimer_run_pending(void) +void hrtimer_run_queues(void) { - if (hrtimer_hres_active()) + struct hrtimer_cpu_base *cpu_base = this_cpu_ptr(&hrtimer_bases); + ktime_t now; + + if (__hrtimer_hres_active(cpu_base)) return; /* - * This _is_ ugly: We have to check in the softirq context, - * whether we can switch to highres and / or nohz mode. The - * clocksource switch happens in the timer interrupt with - * xtime_lock held. Notification from there only sets the - * check bit in the tick_oneshot code, otherwise we might - * deadlock vs. xtime_lock. + * This _is_ ugly: We have to check periodically, whether we + * can switch to highres and / or nohz mode. The clocksource + * switch happens with xtime_lock held. Notification from + * there only sets the check bit in the tick_oneshot code, + * otherwise we might deadlock vs. xtime_lock. */ - if (tick_check_oneshot_change(!hrtimer_is_hres_enabled())) + if (tick_check_oneshot_change(!hrtimer_is_hres_enabled())) { hrtimer_switch_to_hres(); -} - -/* - * Called from hardirq context every jiffy - */ -void hrtimer_run_queues(void) -{ - struct timerqueue_node *node; - struct hrtimer_cpu_base *cpu_base = this_cpu_ptr(&hrtimer_bases); - struct hrtimer_clock_base *base; - int index, gettime = 1; - - if (hrtimer_hres_active()) return; - - for (index = 0; index < HRTIMER_MAX_CLOCK_BASES; index++) { - base = &cpu_base->clock_base[index]; - if (!timerqueue_getnext(&base->active)) - continue; - - if (gettime) { - hrtimer_get_softirq_time(cpu_base); - gettime = 0; - } - - raw_spin_lock(&cpu_base->lock); - - while ((node = timerqueue_getnext(&base->active))) { - struct hrtimer *timer; - - timer = container_of(node, struct hrtimer, node); - if (base->softirq_time.tv64 <= - hrtimer_get_expires_tv64(timer)) - break; - - __run_hrtimer(timer, &base->softirq_time); - } - raw_spin_unlock(&cpu_base->lock); } + + raw_spin_lock(&cpu_base->lock); + now = hrtimer_update_base(cpu_base); + __hrtimer_run_queues(cpu_base, now); + raw_spin_unlock(&cpu_base->lock); } /* @@ -1497,8 +1458,6 @@ static int __sched do_nanosleep(struct hrtimer_sleeper *t, enum hrtimer_mode mod do { set_current_state(TASK_INTERRUPTIBLE); hrtimer_start_expires(&t->timer, mode); - if (!hrtimer_active(&t->timer)) - t->task = NULL; if (likely(t->task)) freezable_schedule(); @@ -1642,11 +1601,11 @@ static void migrate_hrtimer_list(struct hrtimer_clock_base *old_base, debug_deactivate(timer); /* - * Mark it as STATE_MIGRATE not INACTIVE otherwise the + * Mark it as ENQUEUED not INACTIVE otherwise the * timer could be seen as !active and just vanish away * under us on another CPU */ - __remove_hrtimer(timer, old_base, HRTIMER_STATE_MIGRATE, 0); + __remove_hrtimer(timer, old_base, HRTIMER_STATE_ENQUEUED, 0); timer->base = new_base; /* * Enqueue the timers on the new cpu. This does not @@ -1657,9 +1616,6 @@ static void migrate_hrtimer_list(struct hrtimer_clock_base *old_base, * event device. */ enqueue_hrtimer(timer, new_base); - - /* Clear the migration state bit */ - timer->state &= ~HRTIMER_STATE_MIGRATE; } } @@ -1731,9 +1687,6 @@ void __init hrtimers_init(void) hrtimer_cpu_notify(&hrtimers_nb, (unsigned long)CPU_UP_PREPARE, (void *)(long)smp_processor_id()); register_cpu_notifier(&hrtimers_nb); -#ifdef CONFIG_HIGH_RES_TIMERS - open_softirq(HRTIMER_SOFTIRQ, run_hrtimer_softirq); -#endif } /** @@ -1772,8 +1725,6 @@ schedule_hrtimeout_range_clock(ktime_t *expires, unsigned long delta, hrtimer_init_sleeper(&t, current); hrtimer_start_expires(&t.timer, mode); - if (!hrtimer_active(&t.timer)) - t.task = NULL; if (likely(t.task)) schedule(); |