diff options
Diffstat (limited to 'mm/Kconfig')
| -rw-r--r-- | mm/Kconfig | 663 |
1 files changed, 663 insertions, 0 deletions
diff --git a/mm/Kconfig b/mm/Kconfig new file mode 100644 index 000000000..738756d84 --- /dev/null +++ b/mm/Kconfig @@ -0,0 +1,663 @@ +config SELECT_MEMORY_MODEL + def_bool y + depends on ARCH_SELECT_MEMORY_MODEL + +choice + prompt "Memory model" + depends on SELECT_MEMORY_MODEL + default DISCONTIGMEM_MANUAL if ARCH_DISCONTIGMEM_DEFAULT + default SPARSEMEM_MANUAL if ARCH_SPARSEMEM_DEFAULT + default FLATMEM_MANUAL + +config FLATMEM_MANUAL + bool "Flat Memory" + depends on !(ARCH_DISCONTIGMEM_ENABLE || ARCH_SPARSEMEM_ENABLE) || ARCH_FLATMEM_ENABLE + help + This option allows you to change some of the ways that + Linux manages its memory internally. Most users will + only have one option here: FLATMEM. This is normal + and a correct option. + + Some users of more advanced features like NUMA and + memory hotplug may have different options here. + DISCONTIGMEM is a more mature, better tested system, + but is incompatible with memory hotplug and may suffer + decreased performance over SPARSEMEM. If unsure between + "Sparse Memory" and "Discontiguous Memory", choose + "Discontiguous Memory". + + If unsure, choose this option (Flat Memory) over any other. + +config DISCONTIGMEM_MANUAL + bool "Discontiguous Memory" + depends on ARCH_DISCONTIGMEM_ENABLE + help + This option provides enhanced support for discontiguous + memory systems, over FLATMEM. These systems have holes + in their physical address spaces, and this option provides + more efficient handling of these holes. However, the vast + majority of hardware has quite flat address spaces, and + can have degraded performance from the extra overhead that + this option imposes. + + Many NUMA configurations will have this as the only option. + + If unsure, choose "Flat Memory" over this option. + +config SPARSEMEM_MANUAL + bool "Sparse Memory" + depends on ARCH_SPARSEMEM_ENABLE + help + This will be the only option for some systems, including + memory hotplug systems. This is normal. + + For many other systems, this will be an alternative to + "Discontiguous Memory". This option provides some potential + performance benefits, along with decreased code complexity, + but it is newer, and more experimental. + + If unsure, choose "Discontiguous Memory" or "Flat Memory" + over this option. + +endchoice + +config DISCONTIGMEM + def_bool y + depends on (!SELECT_MEMORY_MODEL && ARCH_DISCONTIGMEM_ENABLE) || DISCONTIGMEM_MANUAL + +config SPARSEMEM + def_bool y + depends on (!SELECT_MEMORY_MODEL && ARCH_SPARSEMEM_ENABLE) || SPARSEMEM_MANUAL + +config FLATMEM + def_bool y + depends on (!DISCONTIGMEM && !SPARSEMEM) || FLATMEM_MANUAL + +config FLAT_NODE_MEM_MAP + def_bool y + depends on !SPARSEMEM + +# +# Both the NUMA code and DISCONTIGMEM use arrays of pg_data_t's +# to represent different areas of memory. This variable allows +# those dependencies to exist individually. +# +config NEED_MULTIPLE_NODES + def_bool y + depends on DISCONTIGMEM || NUMA + +config HAVE_MEMORY_PRESENT + def_bool y + depends on ARCH_HAVE_MEMORY_PRESENT || SPARSEMEM + +# +# SPARSEMEM_EXTREME (which is the default) does some bootmem +# allocations when memory_present() is called. If this cannot +# be done on your architecture, select this option. However, +# statically allocating the mem_section[] array can potentially +# consume vast quantities of .bss, so be careful. +# +# This option will also potentially produce smaller runtime code +# with gcc 3.4 and later. +# +config SPARSEMEM_STATIC + bool + +# +# Architecture platforms which require a two level mem_section in SPARSEMEM +# must select this option. This is usually for architecture platforms with +# an extremely sparse physical address space. +# +config SPARSEMEM_EXTREME + def_bool y + depends on SPARSEMEM && !SPARSEMEM_STATIC + +config SPARSEMEM_VMEMMAP_ENABLE + bool + +config SPARSEMEM_ALLOC_MEM_MAP_TOGETHER + def_bool y + depends on SPARSEMEM && X86_64 + +config SPARSEMEM_VMEMMAP + bool "Sparse Memory virtual memmap" + depends on SPARSEMEM && SPARSEMEM_VMEMMAP_ENABLE + default y + help + SPARSEMEM_VMEMMAP uses a virtually mapped memmap to optimise + pfn_to_page and page_to_pfn operations. This is the most + efficient option when sufficient kernel resources are available. + +config HAVE_MEMBLOCK + bool + +config HAVE_MEMBLOCK_NODE_MAP + bool + +config HAVE_MEMBLOCK_PHYS_MAP + bool + +config HAVE_GENERIC_RCU_GUP + bool + +config ARCH_DISCARD_MEMBLOCK + bool + +config NO_BOOTMEM + bool + +config MEMORY_ISOLATION + bool + +config MOVABLE_NODE + bool "Enable to assign a node which has only movable memory" + depends on HAVE_MEMBLOCK + depends on NO_BOOTMEM + depends on X86_64 + depends on NUMA + default n + help + Allow a node to have only movable memory. Pages used by the kernel, + such as direct mapping pages cannot be migrated. So the corresponding + memory device cannot be hotplugged. This option allows the following + two things: + - When the system is booting, node full of hotpluggable memory can + be arranged to have only movable memory so that the whole node can + be hot-removed. (need movable_node boot option specified). + - After the system is up, the option allows users to online all the + memory of a node as movable memory so that the whole node can be + hot-removed. + + Users who don't use the memory hotplug feature are fine with this + option on since they don't specify movable_node boot option or they + don't online memory as movable. + + Say Y here if you want to hotplug a whole node. + Say N here if you want kernel to use memory on all nodes evenly. + +# +# Only be set on architectures that have completely implemented memory hotplug +# feature. If you are not sure, don't touch it. +# +config HAVE_BOOTMEM_INFO_NODE + def_bool n + +# eventually, we can have this option just 'select SPARSEMEM' +config MEMORY_HOTPLUG + bool "Allow for memory hot-add" + depends on SPARSEMEM || X86_64_ACPI_NUMA + depends on ARCH_ENABLE_MEMORY_HOTPLUG + depends on (IA64 || X86 || PPC_BOOK3S_64 || SUPERH || S390) + +config MEMORY_HOTPLUG_SPARSE + def_bool y + depends on SPARSEMEM && MEMORY_HOTPLUG + +config MEMORY_HOTREMOVE + bool "Allow for memory hot remove" + select MEMORY_ISOLATION + select HAVE_BOOTMEM_INFO_NODE if (X86_64 || PPC64) + depends on MEMORY_HOTPLUG && ARCH_ENABLE_MEMORY_HOTREMOVE + depends on MIGRATION + +# +# If we have space for more page flags then we can enable additional +# optimizations and functionality. +# +# Regular Sparsemem takes page flag bits for the sectionid if it does not +# use a virtual memmap. Disable extended page flags for 32 bit platforms +# that require the use of a sectionid in the page flags. +# +config PAGEFLAGS_EXTENDED + def_bool y + depends on 64BIT || SPARSEMEM_VMEMMAP || !SPARSEMEM + +# Heavily threaded applications may benefit from splitting the mm-wide +# page_table_lock, so that faults on different parts of the user address +# space can be handled with less contention: split it at this NR_CPUS. +# Default to 4 for wider testing, though 8 might be more appropriate. +# ARM's adjust_pte (unused if VIPT) depends on mm-wide page_table_lock. +# PA-RISC 7xxx's spinlock_t would enlarge struct page from 32 to 44 bytes. +# DEBUG_SPINLOCK and DEBUG_LOCK_ALLOC spinlock_t also enlarge struct page. +# +config SPLIT_PTLOCK_CPUS + int + default "999999" if !MMU + default "999999" if ARM && !CPU_CACHE_VIPT + default "999999" if PARISC && !PA20 + default "4" + +config ARCH_ENABLE_SPLIT_PMD_PTLOCK + bool + +# +# support for memory balloon +config MEMORY_BALLOON + bool + +# +# support for memory balloon compaction +config BALLOON_COMPACTION + bool "Allow for balloon memory compaction/migration" + def_bool y + depends on COMPACTION && MEMORY_BALLOON + help + Memory fragmentation introduced by ballooning might reduce + significantly the number of 2MB contiguous memory blocks that can be + used within a guest, thus imposing performance penalties associated + with the reduced number of transparent huge pages that could be used + by the guest workload. Allowing the compaction & migration for memory + pages enlisted as being part of memory balloon devices avoids the + scenario aforementioned and helps improving memory defragmentation. + +# +# support for memory compaction +config COMPACTION + bool "Allow for memory compaction" + def_bool y + select MIGRATION + depends on MMU + help + Allows the compaction of memory for the allocation of huge pages. + +# +# support for page migration +# +config MIGRATION + bool "Page migration" + def_bool y + depends on (NUMA || ARCH_ENABLE_MEMORY_HOTREMOVE || COMPACTION || CMA) && MMU + help + Allows the migration of the physical location of pages of processes + while the virtual addresses are not changed. This is useful in + two situations. The first is on NUMA systems to put pages nearer + to the processors accessing. The second is when allocating huge + pages as migration can relocate pages to satisfy a huge page + allocation instead of reclaiming. + +config ARCH_ENABLE_HUGEPAGE_MIGRATION + bool + +config PHYS_ADDR_T_64BIT + def_bool 64BIT || ARCH_PHYS_ADDR_T_64BIT + +config ZONE_DMA_FLAG + int + default "0" if !ZONE_DMA + default "1" + +config BOUNCE + bool "Enable bounce buffers" + default y + depends on BLOCK && MMU && (ZONE_DMA || HIGHMEM) + help + Enable bounce buffers for devices that cannot access + the full range of memory available to the CPU. Enabled + by default when ZONE_DMA or HIGHMEM is selected, but you + may say n to override this. + +# On the 'tile' arch, USB OHCI needs the bounce pool since tilegx will often +# have more than 4GB of memory, but we don't currently use the IOTLB to present +# a 32-bit address to OHCI. So we need to use a bounce pool instead. +# +# We also use the bounce pool to provide stable page writes for jbd. jbd +# initiates buffer writeback without locking the page or setting PG_writeback, +# and fixing that behavior (a second time; jbd2 doesn't have this problem) is +# a major rework effort. Instead, use the bounce buffer to snapshot pages +# (until jbd goes away). The only jbd user is ext3. +config NEED_BOUNCE_POOL + bool + default y if (TILE && USB_OHCI_HCD) || (BLK_DEV_INTEGRITY && JBD) + +config NR_QUICK + int + depends on QUICKLIST + default "2" if AVR32 + default "1" + +config VIRT_TO_BUS + bool + help + An architecture should select this if it implements the + deprecated interface virt_to_bus(). All new architectures + should probably not select this. + + +config MMU_NOTIFIER + bool + select SRCU + +config KSM + bool "Enable KSM for page merging" + depends on MMU + help + Enable Kernel Samepage Merging: KSM periodically scans those areas + of an application's address space that an app has advised may be + mergeable. When it finds pages of identical content, it replaces + the many instances by a single page with that content, so + saving memory until one or another app needs to modify the content. + Recommended for use with KVM, or with other duplicative applications. + See Documentation/vm/ksm.txt for more information: KSM is inactive + until a program has madvised that an area is MADV_MERGEABLE, and + root has set /sys/kernel/mm/ksm/run to 1 (if CONFIG_SYSFS is set). +choice + prompt "Choose UKSM/KSM strategy" + default UKSM + depends on KSM + help + This option allows to select a UKSM/KSM stragety. + +config UKSM + bool "Ultra-KSM for page merging" + depends on KSM + help + UKSM is inspired by the Linux kernel project \u2014 KSM(Kernel Same + page Merging), but with a fundamentally rewritten core algorithm. With + an advanced algorithm, UKSM now can transparently scans all anonymously + mapped user space applications with an significantly improved scan speed + and CPU efficiency. Since KVM is friendly to KSM, KVM can also benefit from + UKSM. Now UKSM has its first stable release and first real world enterprise user. + For more information, please goto its project page. + (www.kerneldedup.org) + +config KSM_LEGACY + bool "Legacy KSM implementation" + depends on KSM + help + The legacy KSM implementation from Redhat. +endchoice + +config DEFAULT_MMAP_MIN_ADDR + int "Low address space to protect from user allocation" + depends on MMU + default 4096 + help + This is the portion of low virtual memory which should be protected + from userspace allocation. Keeping a user from writing to low pages + can help reduce the impact of kernel NULL pointer bugs. + + For most ia64, ppc64 and x86 users with lots of address space + a value of 65536 is reasonable and should cause no problems. + On arm and other archs it should not be higher than 32768. + Programs which use vm86 functionality or have some need to map + this low address space will need CAP_SYS_RAWIO or disable this + protection by setting the value to 0. + + This value can be changed after boot using the + /proc/sys/vm/mmap_min_addr tunable. + +config ARCH_SUPPORTS_MEMORY_FAILURE + bool + +config MEMORY_FAILURE + depends on MMU + depends on ARCH_SUPPORTS_MEMORY_FAILURE + bool "Enable recovery from hardware memory errors" + select MEMORY_ISOLATION + help + Enables code to recover from some memory failures on systems + with MCA recovery. This allows a system to continue running + even when some of its memory has uncorrected errors. This requires + special hardware support and typically ECC memory. + +config HWPOISON_INJECT + tristate "HWPoison pages injector" + depends on MEMORY_FAILURE && DEBUG_KERNEL && PROC_FS + select PROC_PAGE_MONITOR + +config NOMMU_INITIAL_TRIM_EXCESS + int "Turn on mmap() excess space trimming before booting" + depends on !MMU + default 1 + help + The NOMMU mmap() frequently needs to allocate large contiguous chunks + of memory on which to store mappings, but it can only ask the system + allocator for chunks in 2^N*PAGE_SIZE amounts - which is frequently + more than it requires. To deal with this, mmap() is able to trim off + the excess and return it to the allocator. + + If trimming is enabled, the excess is trimmed off and returned to the + system allocator, which can cause extra fragmentation, particularly + if there are a lot of transient processes. + + If trimming is disabled, the excess is kept, but not used, which for + long-term mappings means that the space is wasted. + + Trimming can be dynamically controlled through a sysctl option + (/proc/sys/vm/nr_trim_pages) which specifies the minimum number of + excess pages there must be before trimming should occur, or zero if + no trimming is to occur. + + This option specifies the initial value of this option. The default + of 1 says that all excess pages should be trimmed. + + See Documentation/nommu-mmap.txt for more information. + +config TRANSPARENT_HUGEPAGE + bool "Transparent Hugepage Support" + depends on HAVE_ARCH_TRANSPARENT_HUGEPAGE + select COMPACTION + help + Transparent Hugepages allows the kernel to use huge pages and + huge tlb transparently to the applications whenever possible. + This feature can improve computing performance to certain + applications by speeding up page faults during memory + allocation, by reducing the number of tlb misses and by speeding + up the pagetable walking. + + If memory constrained on embedded, you may want to say N. + +choice + prompt "Transparent Hugepage Support sysfs defaults" + depends on TRANSPARENT_HUGEPAGE + default TRANSPARENT_HUGEPAGE_ALWAYS + help + Selects the sysfs defaults for Transparent Hugepage Support. + + config TRANSPARENT_HUGEPAGE_ALWAYS + bool "always" + help + Enabling Transparent Hugepage always, can increase the + memory footprint of applications without a guaranteed + benefit but it will work automatically for all applications. + + config TRANSPARENT_HUGEPAGE_MADVISE + bool "madvise" + help + Enabling Transparent Hugepage madvise, will only provide a + performance improvement benefit to the applications using + madvise(MADV_HUGEPAGE) but it won't risk to increase the + memory footprint of applications without a guaranteed + benefit. +endchoice + +# +# UP and nommu archs use km based percpu allocator +# +config NEED_PER_CPU_KM + depends on !SMP + bool + default y + +config CLEANCACHE + bool "Enable cleancache driver to cache clean pages if tmem is present" + default n + help + Cleancache can be thought of as a page-granularity victim cache + for clean pages that the kernel's pageframe replacement algorithm + (PFRA) would like to keep around, but can't since there isn't enough + memory. So when the PFRA "evicts" a page, it first attempts to use + cleancache code to put the data contained in that page into + "transcendent memory", memory that is not directly accessible or + addressable by the kernel and is of unknown and possibly + time-varying size. And when a cleancache-enabled + filesystem wishes to access a page in a file on disk, it first + checks cleancache to see if it already contains it; if it does, + the page is copied into the kernel and a disk access is avoided. + When a transcendent memory driver is available (such as zcache or + Xen transcendent memory), a significant I/O reduction + may be achieved. When none is available, all cleancache calls + are reduced to a single pointer-compare-against-NULL resulting + in a negligible performance hit. + + If unsure, say Y to enable cleancache + +config FRONTSWAP + bool "Enable frontswap to cache swap pages if tmem is present" + depends on SWAP + default n + help + Frontswap is so named because it can be thought of as the opposite + of a "backing" store for a swap device. The data is stored into + "transcendent memory", memory that is not directly accessible or + addressable by the kernel and is of unknown and possibly + time-varying size. When space in transcendent memory is available, + a significant swap I/O reduction may be achieved. When none is + available, all frontswap calls are reduced to a single pointer- + compare-against-NULL resulting in a negligible performance hit + and swap data is stored as normal on the matching swap device. + + If unsure, say Y to enable frontswap. + +config CMA + bool "Contiguous Memory Allocator" + depends on HAVE_MEMBLOCK && MMU + select MIGRATION + select MEMORY_ISOLATION + help + This enables the Contiguous Memory Allocator which allows other + subsystems to allocate big physically-contiguous blocks of memory. + CMA reserves a region of memory and allows only movable pages to + be allocated from it. This way, the kernel can use the memory for + pagecache and when a subsystem requests for contiguous area, the + allocated pages are migrated away to serve the contiguous request. + + If unsure, say "n". + +config CMA_DEBUG + bool "CMA debug messages (DEVELOPMENT)" + depends on DEBUG_KERNEL && CMA + help + Turns on debug messages in CMA. This produces KERN_DEBUG + messages for every CMA call as well as various messages while + processing calls such as dma_alloc_from_contiguous(). + This option does not affect warning and error messages. + +config CMA_DEBUGFS + bool "CMA debugfs interface" + depends on CMA && DEBUG_FS + help + Turns on the DebugFS interface for CMA. + +config CMA_AREAS + int "Maximum count of the CMA areas" + depends on CMA + default 7 + help + CMA allows to create CMA areas for particular purpose, mainly, + used as device private area. This parameter sets the maximum + number of CMA area in the system. + + If unsure, leave the default value "7". + +config MEM_SOFT_DIRTY + bool "Track memory changes" + depends on CHECKPOINT_RESTORE && HAVE_ARCH_SOFT_DIRTY && PROC_FS + select PROC_PAGE_MONITOR + help + This option enables memory changes tracking by introducing a + soft-dirty bit on pte-s. This bit it set when someone writes + into a page just as regular dirty bit, but unlike the latter + it can be cleared by hands. + + See Documentation/vm/soft-dirty.txt for more details. + +config ZSWAP + bool "Compressed cache for swap pages (EXPERIMENTAL)" + depends on FRONTSWAP && CRYPTO=y + select CRYPTO_LZO + select ZPOOL + default n + help + A lightweight compressed cache for swap pages. It takes + pages that are in the process of being swapped out and attempts to + compress them into a dynamically allocated RAM-based memory pool. + This can result in a significant I/O reduction on swap device and, + in the case where decompressing from RAM is faster that swap device + reads, can also improve workload performance. + + This is marked experimental because it is a new feature (as of + v3.11) that interacts heavily with memory reclaim. While these + interactions don't cause any known issues on simple memory setups, + they have not be fully explored on the large set of potential + configurations and workloads that exist. + +config ZPOOL + tristate "Common API for compressed memory storage" + default n + help + Compressed memory storage API. This allows using either zbud or + zsmalloc. + +config ZBUD + tristate "Low density storage for compressed pages" + default n + help + A special purpose allocator for storing compressed pages. + It is designed to store up to two compressed pages per physical + page. While this design limits storage density, it has simple and + deterministic reclaim properties that make it preferable to a higher + density approach when reclaim will be used. + +config ZSMALLOC + tristate "Memory allocator for compressed pages" + depends on MMU + default n + help + zsmalloc is a slab-based memory allocator designed to store + compressed RAM pages. zsmalloc uses virtual memory mapping + in order to reduce fragmentation. However, this results in a + non-standard allocator interface where a handle, not a pointer, is + returned by an alloc(). This handle must be mapped in order to + access the allocated space. + +config PGTABLE_MAPPING + bool "Use page table mapping to access object in zsmalloc" + depends on ZSMALLOC + help + By default, zsmalloc uses a copy-based object mapping method to + access allocations that span two pages. However, if a particular + architecture (ex, ARM) performs VM mapping faster than copying, + then you should select this. This causes zsmalloc to use page table + mapping rather than copying for object mapping. + + You can check speed with zsmalloc benchmark: + https://github.com/spartacus06/zsmapbench + +config ZSMALLOC_STAT + bool "Export zsmalloc statistics" + depends on ZSMALLOC + select DEBUG_FS + help + This option enables code in the zsmalloc to collect various + statistics about whats happening in zsmalloc and exports that + information to userspace via debugfs. + If unsure, say N. + +config GENERIC_EARLY_IOREMAP + bool + +config MAX_STACK_SIZE_MB + int "Maximum user stack size for 32-bit processes (MB)" + default 80 + range 8 256 if METAG + range 8 2048 + depends on STACK_GROWSUP && (!64BIT || COMPAT) + help + This is the maximum stack size in Megabytes in the VM layout of 32-bit + user processes when the stack grows upwards (currently only on parisc + and metag arch). The stack will be located at the highest memory + address minus the given value, unless the RLIMIT_STACK hard limit is + changed to a smaller value in which case that is used. + + A sane initial value is 80 MB. |