diff options
Diffstat (limited to 'net/hsr/hsr_slave.c')
| -rw-r--r-- | net/hsr/hsr_slave.c | 200 |
1 files changed, 200 insertions, 0 deletions
diff --git a/net/hsr/hsr_slave.c b/net/hsr/hsr_slave.c new file mode 100644 index 000000000..7d37366cc --- /dev/null +++ b/net/hsr/hsr_slave.c @@ -0,0 +1,200 @@ +/* Copyright 2011-2014 Autronica Fire and Security AS + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the Free + * Software Foundation; either version 2 of the License, or (at your option) + * any later version. + * + * Author(s): + * 2011-2014 Arvid Brodin, arvid.brodin@alten.se + */ + +#include "hsr_slave.h" +#include <linux/etherdevice.h> +#include <linux/if_arp.h> +#include "hsr_main.h" +#include "hsr_device.h" +#include "hsr_forward.h" +#include "hsr_framereg.h" + + +static rx_handler_result_t hsr_handle_frame(struct sk_buff **pskb) +{ + struct sk_buff *skb = *pskb; + struct hsr_port *port; + + if (!skb_mac_header_was_set(skb)) { + WARN_ONCE(1, "%s: skb invalid", __func__); + return RX_HANDLER_PASS; + } + + rcu_read_lock(); /* hsr->node_db, hsr->ports */ + port = hsr_port_get_rcu(skb->dev); + + if (hsr_addr_is_self(port->hsr, eth_hdr(skb)->h_source)) { + /* Directly kill frames sent by ourselves */ + kfree_skb(skb); + goto finish_consume; + } + + if (eth_hdr(skb)->h_proto != htons(ETH_P_PRP)) + goto finish_pass; + + skb_push(skb, ETH_HLEN); + + hsr_forward_skb(skb, port); + +finish_consume: + rcu_read_unlock(); /* hsr->node_db, hsr->ports */ + return RX_HANDLER_CONSUMED; + +finish_pass: + rcu_read_unlock(); /* hsr->node_db, hsr->ports */ + return RX_HANDLER_PASS; +} + +bool hsr_port_exists(const struct net_device *dev) +{ + return rcu_access_pointer(dev->rx_handler) == hsr_handle_frame; +} + + +static int hsr_check_dev_ok(struct net_device *dev) +{ + /* Don't allow HSR on non-ethernet like devices */ + if ((dev->flags & IFF_LOOPBACK) || (dev->type != ARPHRD_ETHER) || + (dev->addr_len != ETH_ALEN)) { + netdev_info(dev, "Cannot use loopback or non-ethernet device as HSR slave.\n"); + return -EINVAL; + } + + /* Don't allow enslaving hsr devices */ + if (is_hsr_master(dev)) { + netdev_info(dev, "Cannot create trees of HSR devices.\n"); + return -EINVAL; + } + + if (hsr_port_exists(dev)) { + netdev_info(dev, "This device is already a HSR slave.\n"); + return -EINVAL; + } + + if (dev->priv_flags & IFF_802_1Q_VLAN) { + netdev_info(dev, "HSR on top of VLAN is not yet supported in this driver.\n"); + return -EINVAL; + } + + if (dev->priv_flags & IFF_DONT_BRIDGE) { + netdev_info(dev, "This device does not support bridging.\n"); + return -EOPNOTSUPP; + } + + /* HSR over bonded devices has not been tested, but I'm not sure it + * won't work... + */ + + return 0; +} + + +/* Setup device to be added to the HSR bridge. */ +static int hsr_portdev_setup(struct net_device *dev, struct hsr_port *port) +{ + int res; + + dev_hold(dev); + res = dev_set_promiscuity(dev, 1); + if (res) + goto fail_promiscuity; + + /* FIXME: + * What does net device "adjacency" mean? Should we do + * res = netdev_master_upper_dev_link(port->dev, port->hsr->dev); ? + */ + + res = netdev_rx_handler_register(dev, hsr_handle_frame, port); + if (res) + goto fail_rx_handler; + dev_disable_lro(dev); + + return 0; + +fail_rx_handler: + dev_set_promiscuity(dev, -1); +fail_promiscuity: + dev_put(dev); + + return res; +} + +int hsr_add_port(struct hsr_priv *hsr, struct net_device *dev, + enum hsr_port_type type) +{ + struct hsr_port *port, *master; + int res; + + if (type != HSR_PT_MASTER) { + res = hsr_check_dev_ok(dev); + if (res) + return res; + } + + port = hsr_port_get_hsr(hsr, type); + if (port != NULL) + return -EBUSY; /* This port already exists */ + + port = kzalloc(sizeof(*port), GFP_KERNEL); + if (port == NULL) + return -ENOMEM; + + if (type != HSR_PT_MASTER) { + res = hsr_portdev_setup(dev, port); + if (res) + goto fail_dev_setup; + } + + port->hsr = hsr; + port->dev = dev; + port->type = type; + + list_add_tail_rcu(&port->port_list, &hsr->ports); + synchronize_rcu(); + + master = hsr_port_get_hsr(hsr, HSR_PT_MASTER); + netdev_update_features(master->dev); + dev_set_mtu(master->dev, hsr_get_max_mtu(hsr)); + + return 0; + +fail_dev_setup: + kfree(port); + return res; +} + +void hsr_del_port(struct hsr_port *port) +{ + struct hsr_priv *hsr; + struct hsr_port *master; + + hsr = port->hsr; + master = hsr_port_get_hsr(hsr, HSR_PT_MASTER); + list_del_rcu(&port->port_list); + + if (port != master) { + if (master != NULL) { + netdev_update_features(master->dev); + dev_set_mtu(master->dev, hsr_get_max_mtu(hsr)); + } + netdev_rx_handler_unregister(port->dev); + dev_set_promiscuity(port->dev, -1); + } + + /* FIXME? + * netdev_upper_dev_unlink(port->dev, port->hsr->dev); + */ + + synchronize_rcu(); + + if (port != master) + dev_put(port->dev); +} |