diff options
Diffstat (limited to 'net/irda/Kconfig')
| -rw-r--r-- | net/irda/Kconfig | 96 |
1 files changed, 96 insertions, 0 deletions
diff --git a/net/irda/Kconfig b/net/irda/Kconfig new file mode 100644 index 000000000..c8671a7ff --- /dev/null +++ b/net/irda/Kconfig @@ -0,0 +1,96 @@ +# +# IrDA protocol configuration +# + +menuconfig IRDA + depends on NET && !S390 + tristate "IrDA (infrared) subsystem support" + select CRC_CCITT + ---help--- + Say Y here if you want to build support for the IrDA (TM) protocols. + The Infrared Data Associations (tm) specifies standards for wireless + infrared communication and is supported by most laptops and PDA's. + + To use Linux support for the IrDA (tm) protocols, you will also need + some user-space utilities like irattach. For more information, see + the file <file:Documentation/networking/irda.txt>. You also want to + read the IR-HOWTO, available at + <http://www.tldp.org/docs.html#howto>. + + If you want to exchange bits of data (vCal, vCard) with a PDA, you + will need to install some OBEX application, such as OpenObex : + <http://sourceforge.net/projects/openobex/> + + To compile this support as a module, choose M here: the module will + be called irda. + +comment "IrDA protocols" + depends on IRDA + +source "net/irda/irlan/Kconfig" + +source "net/irda/irnet/Kconfig" + +source "net/irda/ircomm/Kconfig" + +config IRDA_ULTRA + bool "Ultra (connectionless) protocol" + depends on IRDA + help + Say Y here to support the connectionless Ultra IRDA protocol. + Ultra allows to exchange data over IrDA with really simple devices + (watch, beacon) without the overhead of the IrDA protocol (no handshaking, + no management frames, simple fixed header). + Ultra is available as a special socket : socket(AF_IRDA, SOCK_DGRAM, 1); + +comment "IrDA options" + depends on IRDA + +config IRDA_CACHE_LAST_LSAP + bool "Cache last LSAP" + depends on IRDA + help + Say Y here if you want IrLMP to cache the last LSAP used. This + makes sense since most frames will be sent/received on the same + connection. Enabling this option will save a hash-lookup per frame. + + If unsure, say Y. + +config IRDA_FAST_RR + bool "Fast RRs (low latency)" + depends on IRDA + ---help--- + Say Y here is you want IrLAP to send fast RR (Receive Ready) frames + when acting as a primary station. + Disabling this option will make latency over IrDA very bad. Enabling + this option will make the IrDA stack send more packet than strictly + necessary, thus reduce your battery life (but not that much). + + Fast RR will make IrLAP send out a RR frame immediately when + receiving a frame if its own transmit queue is currently empty. This + will give a lot of speed improvement when receiving much data since + the secondary station will not have to wait the max. turn around + time (usually 500ms) before it is allowed to transmit the next time. + If the transmit queue of the secondary is also empty, the primary will + start backing-off before sending another RR frame, waiting longer + each time until the back-off reaches the max. turn around time. + This back-off increase in controlled via + /proc/sys/net/irda/fast_poll_increase + + If unsure, say Y. + +config IRDA_DEBUG + bool "Debug information" + depends on IRDA + help + Say Y here if you want the IrDA subsystem to write debug information + to your syslog. You can change the debug level in + /proc/sys/net/irda/debug . + When this option is enabled, the IrDA also perform many extra internal + verifications which will usually prevent the kernel to crash in case of + bugs. + + If unsure, say Y (since it makes it easier to find the bugs). + +source "drivers/net/irda/Kconfig" + |